EMPLOYEES’ STATE INSURANCE CORPORATION MODEL HOSPITAL

Rajajinagar, Bangalore – 560 010 (Under Ministry of Labour, Govt. of India)

Phone: 233 20271/272 Fax: 233 25130 No. 532/ESIC/MH/Sup/Eqp/Med/11-12 Date: 04.10.2011

CORRIGENDUM TO TENDER NOTIFICATION

(For ESIC Medical College Bangalore and Coimbatore)

In continuation to the tender notification of even number Dtd. 15/09/2011 and addendum to tender notification Dtd. 30/09/2011, the recommendations, modified specifications by the committee made during the pre bid conference conducted on 03/10/2011 in this hospital in the presence of tenderers , with regard to equipments of following departments .

1. Department of Biochemistry 2. Department of Human Physiology 3. Department of Human Anatomy

The changes in the specifications, quantity and EMD amount are made in the tender application and the modified tender application and other details have been published in the website www.esipgirnr.kar.nic.in which may be please be referred for details.

The equipments are to be delivered and installed by the accepted tenderer at the respective consignee’s sites (either ESICMH & PGIMSR Rajajinagar or ESI Medical College Coimbatore). The delivery charges for the supply and installation at ESI Medical College Coimabtore may be quoted separately.

The last date for submission of tender is extended up to 20/10/2011, 03.00p.m.

The date of opening of general tender box is changed to 21/10/2011, 2.00p.m. and the date of opening of individual tenders/department wise tenders will be intimated to the firms separately.

There is no change regarding the other terms and conditions and other specifications.

Medical Superintendent

EMPLOYEES’ STATE INSURANCE CORPORATION

MODEL HOSPITAL Rajajinagar, Bangalore – 560 010 (Under Ministry of Labour, Govt. of India)

Phone: 233 20271/272 Fax: 233 25130 No. 532/ESIC/MH/Sup/Eqp/Med/09-10 Date: 30.09.2011

ADDENDUM TO TENDER NOTIFICATION

In continuation to the tender notification of even number Dtd. 15/09/2011, addition of quantity of equipments and EMD for the following departments have been made in respect of one more medical college, i.e, ESI Medical College, Coimbatore.

1. Department of Biochemistry 2. Department of Human Physiology 3. Department of Human Anatomy 4. Department of Microbiology 5. Department of Anaesthesia 6. Department of Ophthalmology 7. Department of Pediatrics 8. Department of Pathology

The equipments are to be delivered and installed by the accepted tenderer at the respective the consignee’s sites (either ESICMH & PGIMSR Rajajinagar or ESI Medical College Coimbatore)

The tendered price accepted shall be valid for 01 year for any repeat order. The quantity is likely to be modified as per the requirement.

The modified tender application and other details have been published in the website www.esipgirnr.kar.nic.in and there is no change regarding the terms and conditions and specifications.

Sd/- Medical Superintendent

EMPLOYEES’ STATE INSURANCE CORPORATION MODEL HOSPITAL

Rajajinagar, Bangalore – 560 010 (Under Ministry of Labour, Govt. of India)

Phone: 233 20271/272 Fax: 233 25130 No. 532/ESIC/MH/Sup/Eqp/Med/09-10 Date: 15.09.2011

TENDER NOTIFICATION Sub: Supply of Equipments/ Instruments Sealed and super scribed Item wise tenders and retenders in Single and Two Bid System (as specified in the list of equipments available in our website) on separate prescribed item wise form are invited from manufacturers, authorized dealers, distributors for the supply of good quality Equipments/ instruments for the use of following departments of ESIC Model Hospital & PGIMSR, Rajajinagar, Bangalore -10.

1. Department of Biochemistry 2. Department of Human Physiology 3. Department of Human Anatomy 4. Department of Microbiology 5. Department of Anaesthesia 6. Department of Ophthalmology 7. Department of Pediatrics 8. Department of Pathology

● Detailed information regarding the items, application/tender form, specifications and other information, terms and conditions are given in the tender document which is available in the General Branch of the office of the Medical Superintendent and in the website www.esipgirnr.kar.nic.in. The application forms can be obtained in person from General branch of the office of the Medical Superintendent, ESICMH & PGIMSR by giving a request letter on letter head specifying the name of equipments which the firm wants to quote along with crossed DD / Banker's Cheque for Rs. 200/- per item (Rupees Two Hundred only per item) nonrefundable in favor of ESIC A/C NO.1, payable at Bangalore. The application form and Specifications will be provided accordingly. In case of downloading the application, application fee & EMD amount should be attached separately to the tender documents.

● Venue, date & time for issue of tenders / Documents: from 19/09/2011 to 20/10/2011, 10.a.m. to 3.p.m. at General Branch, ESIC Model Hospital, Rajajinagar, Bangalore – 10.

● Last date for receipt of completed tender Documents: 20/10/2011, up to 3.00.p.m. or if it happens to be holiday on next working day.

● Pre bid discussion regarding the specifications and all other doubts will be held on 03/10/2011, at 2.00pm. in the old conference hall in presence of HODs of the corresponding Departments.

● Date of opening the tender will be intimated after sorting out of all tenders after opening the single tender box on 21/10/2011 at 2 p.m. in the old conference hall, first floor of the Hospital or next working day if it happens to be a holiday.

● The undersigned reserves the right to postpone the date of opening or to accept or reject any or all the bids without assigning any reason at any stage.

Sd/- Medical Superintendent

Detailed information regarding the Tender Dated 15/09/2011 & Addendum Dtd. 30/09/2011 and Corrigendum Dtd. 04/10/2011 for;

The supply of Medical Equipments/Instruments for the use of ESICMH & PGIMSR

List of equipments

Sl. No. Name/ Description and department of the Equipment (with bid type – as indicated in bracket)

Quantity (No.)

EMD Amount (Rs)

Equipment for the department of Biochemistry 1. Temperature Humidity data logger (Single bid) 08 2400/- 2. Micro balance (Single bid) 02 1000/- 3. Microscope(Single bid) 12 5400/- 4. Water bath rectangular (Single bid) 14 3100/- 5. Autoclave vertical (Single bid) 4 6600/- 6. Balance open type (Single bid) 10 4500/- 7. Balance semi micro (Single bid) 2 600/- 8. Balance micro (Single bid) 2 600/- 9. Constant temperature water bath (Single bid) 4 3000/- 10. Laboratory incubator (Single bid) 6 3600/- 11. Hot air oven (Single bid) 6 3600/- 12. Vacuum pump 2 1200/- 13. Colorimeter (Single bid) 8 3600/- 14. Flame photometer (Single bid) 2 1100/- 15. Distilled water still with stainless steel wall mountable

model (Single bid) 14 4000/-

16. All Quartz double distillation Apparatus (Single bid) 8 12000/- 17. High speed centrifuge (Single bid) 14 8400/- 18. PH Meter (Single bid) 4 3000/- 19. Tissue homogenizer (Single bid) 2 1800/- 20. UV Lamp with fittings (Single bid) 2 2400/- 21. Paper electrophoresis (Single bid) 12 16200/- 22. Fume cup board (Two Bid) 4 12000/-

Equipment for the department of Human Physiology 23. Microscopes compound pathological microscope for

hematology lab(Single bid) 84 37800/-

24. Incubator electric with thermo static – stage type (Single bid)

4 4000/-

25. Stethography (Two bid) 20 120000/- 26. Spirometry system (Two bid) 12 36000/- 27. Recording spirometer/ benedicts roth Spirometer (Single

bid) 2 2000/-

28. Wright’s peak flow meter (Single bid) 6 2160/- 29. Computerized PFT with Interpretation Facilities (Two bid) 6 27000/- 30. Mechanical respirator (Two bid) 2 9000/- 31. Perimeter (Single bid) 12 5400/- 32. ECG Machine Single channel (Single bid) 12 7200/- 33. ECG Machine Multichannel(Single bid) 6 14400/- 34. Electromyogram (EMG) (Two bid) 6 270000/- 35. Ultrasonography (Single bid) 2 1200/-

36. EEG Machine recorder portable (Two bid) 2 90000/- 37. Audiometry (Single bid) 2 5000/- 38. Physiograph (Two bid) 12 72000/- 39. Multi channel polygraph computerized (Two bid) 4 24000/- 40. Apparatus for continuous passive motion (Two bid) 2 12000/- 41. Bicycle Ergometer (Single bid) 8 3600/- 42. Dynamometer (Two bid) 2 9000/- 43. Calorimeter (Single bid) 2 600/- 44. Electronic muscle stimulator (Single bid) 2 300/- 45. Balance analytical (Single bid) 6 600/-

Equipment for the department of Human Anatomy 46. Embalming work station with embalming machine or

cadaver injector (Single bid) 2 2400/-

47. Mortuary cooler with arrangement to keep 4 or 6 bodies (Single bid)

2 1500/-

48. X Ray Viewing Lobby – double or 04 films (Single bid) 6 4800/- 49. Cabinet for slides (Single bid) 12 800/- 50. Hot air oven for drying slides (Single bid) 2 4200/- 51. Balance Ear hanger (Single bid) 4 600/- 52. Research microscope (Single bid) 4 2600/- 53. Mobile/portable pedestal operating Surgical light (Two

Bid) 12 24000/-

54. Dissection Microscope – stereo type (Two Bid) 10 40000/- 55. Semi automatic rotary Microtome (single Bid) 2 1200/- 56. Microtome Sledge large cutting. (single Bid) 2 1200/- 57. Paraffin embedding bath [6 cup & 8 Shelves] (Single Bid) 2 400/- 58. Hot plate for flattering sections (single Bid) 4 400/-

Equipment for the department of Microbiology 59. Incubator (Single bid) 2 4200/- 60. Hot Air oven (Single bid) 2 3000/- 61. VDRL Shaker (Single bid) 4 600/- 62. Vertex Mixer (Single bid) 2 300/- 63. Chemical Balance (Single bid) 4 4200/- 64. Inspissator (Single bid) 2 900/- 65. Deep Freezer -70°C (Two Bid) 2 12000/- 66. Deep Freezer -20°C (Two Bid) 2 12000/- 67. BOD Incubator (Two Bid) – Retender 2 10000/-

Equipment for the department of Anesthesia 68. Vital Sign Monitor(Single bid) 8 2400/- 69. Proseal LMA, Size 1,2,3,4(Single bid) 2 each 8400/- 70. Classic LMA, Size 1,2,3,4(Single bid) 2 each 8400/- 71. Intubating LMA size 3, 4(Single bid) 2 each 4200/- 72. Ambubags – Adult (Single bid) 10 9000/- 73. Ambubag – pediatric (Single bid) 2 2000/- 74. Ethylene oxide sterilizer (Two Bid) – Retender 2 9000/-

75. Peripheral nerve stimulator (Two Bid) – Retender 2 6000/- Equipment for the department of Ophthalmology

76. Wet field Bipolar cautery (Single bid) 2 1500/- 77. Small Pupil Indirect ophthalmoscope (Single bid) 2 4000/- 78. Visual field analyzer (Two Bid) 2 40000/-

Equipment for the department of Pediatrics 79. Bubble C Pap (Two Bid) – Retender 8 8000/-

Equipment for the department of pathology 80. Slide cabinet (single bid) 6 12000/- 81. Block cabinet (single bid) 6 12000/-

ESIC MODEL HOSPITAL RAJAJINAGAR, BANGALORE – 10

No. 532/ESIC/MH/Sup/Eqp/Med/09-10 Date: 04.10.2011

APPLICATION FORM FOR MEDICAL EQUIPMENTS 1. Tender Serial Number

2. Name and registered address of the Quoting Company / Establishment/firm

3. Contact Telephone No/Mobile No./e-mail ID

4. Name and designation of the authorized person/owner

(please enclose authorization certificate)

5. Name and model and Make of the Equipment Quoted confirming to specification.

Name and address of manufacturer

6. Registration No. under the Shops and Establishment Act, Xerox copy to be enclosed

7. Sales Tax Registration No/KST No./Service Tax No./CST No.

8. EMD Details: DD No. & Dt. Amount: (If any)

Bank & Branch :

9. Proof of turn over: IT return/ audited balance sheet with profit/loss

10. Wholesaler/ Retailer/manufacturer/authorised dealer/ agent

11. PAN/TAN/GIR No.

12. Any other information / Experience / Empanelment/ list of institutions at Bangalore

13. Name and address of the authorized local service provider at Bangalore along with Tel. No(mobile and Land line)

14. CMC rates quoted or otherwise, in financial bid

15. Specification Checklist verified YES/NO

Signature & Seal of

Application/Establishment

EMPLOYEES’ STATE INSURANCE CORPORATION MODEL HOSPITAL

Rajajinagar, Bangalore – 560 010 (Under Ministry of Labour, Govt. of India)

Phone: 233 20271 / 272 Fax: 233 25130 No. 532/ESIC/MH/Sup/Eqp/Med/09-10 Date: 04.10.2011 Subject: Invitation of tender and instructions to Tenderers – Supply of Medical Equipments.

Note: The Sealed Super scribed envelope containing the tender as well as subsequent communications should be addressed and delivered to: The Medical Superintendent, ESIC Model Hospital, Rajajinagar, Bangalore – 10. All Communications must be addressed to the officer named above by title only and not by name.

From,

Medical Superintendent, ESIC Model Hospital, Rajajinagar, Bangalore – 10.

To, ------------------------------------------- ------------------------------------------- ------------------------------------------- ------------------------------------------- ------------------------------------------- Sir, >>>o<<< Medical Superintendent ESIC Model Hospital, Rajajinagar, Bangalore – 10, have invited for sealed super scribed item wise tenders under single bid and two bid system (as indicated in the list of items given below) on the prescribed format with Annexure and Declaration for the supply of good quality of Equipments for the use of this ESICMH & PGIMSR on following terms and conditions and specification. (Specification Enclosed) List of equipments

Sl. No. Name/ Description and department of the Equipment (with bid type – as indicated in bracket)

Quantity (No.)

EMD Amount (Rs)

Equipment for the department of Biochemistry 1) Temperature Humidity data logger (Single bid) 08 2400/- 2) Micro balance (Single bid) 02 1000/- 3) Microscope(Single bid) 12 5400/- 4) Water bath rectangular (Single bid) 14 3100/- 5) Autoclave vertical (Single bid) 4 6600/- 6) Balance open type (Single bid) 10 4500/- 7) Balance semi micro (Single bid) 2 600/- 8) Balance micro (Single bid) 2 600/- 9) Constant temperature water bath (Single bid) 4 3000/- 10) Laboratory incubator (Single bid) 6 3600/- 11) Hot air oven (Single bid) 6 3600/- 12) Vacuum pump 2 1200/- 13) Colorimeter (Single bid) 8 3600/-

14) Flame photometer (Single bid) 2 1100/- 15) Distilled water still with stainless steel wall mountable

model (Single bid) 14 4000/-

16) All Quartz double distillation Apparatus (Single bid) 8 12000/- 17) High speed centrifuge (Single bid) 14 8400/- 18) PH Meter (Single bid) 4 3000/- 19) Tissue homogenizer (Single bid) 2 1800/- 20) UV Lamp with fittings (Single bid) 2 2400/- 21) Paper electrophoresis (Single bid) 12 16200/- 22) Fume cup board (Two Bid) 4 12000/-

Equipment for the department of Human Physiology 23) Microscopes compound pathological microscope for

hematology lab(Single bid) 84 37800/-

24) Incubator electric with thermo static – stage type (Single bid)

4 4000/-

25) Stethography (Two bid) 20 120000/- 26) Spirometry system (Two bid) 12 36000/- 27) Recording spirometer/ benedicts roth Spirometer (Single

bid) 2 2000/-

28) Wright’s peak flow meter (Single bid) 6 2160/- 29) Computerized PFT with Interpretation Facilities (Two bid) 6 27000/- 30) Mechanical respirator (Two bid) 2 9000/- 31) Perimeter (Single bid) 12 5400/- 32) ECG Machine Single channel (Single bid) 12 7200/- 33) ECG Machine Multichannel(Single bid) 6 14400/- 34) Electromyogram (EMG) (Two bid) 6 270000/- 35) Ultrasonography (Single bid) 2 1200/- 36) EEG Machine recorder portable (Two bid) 2 90000/- 37) Audiometry (Single bid) 2 5000/- 38) Physiograph (Two bid) 12 72000/- 39) Multi channel polygraph computerized (Two bid) 4 24000/- 40) Apparatus for continuous passive motion (Two bid) 2 12000/- 41) Bicycle Ergometer (Single bid) 8 3600/- 42) Dynamometer (Two bid) 2 9000/- 43) Calorimeter (Single bid) 2 600/- 44) Electronic muscle stimulator (Single bid) 2 300/- 45) Balance analytical (Single bid) 6 600/-

Equipment for the department of Human Anatomy 46) Embalming work station with embalming machine or

cadaver injector (Single bid) 2 2400/-

47) Mortuary cooler with arrangement to keep 4 or 6 bodies (Single bid)

2 1500/-

48) X Ray Viewing Lobby – double or 04 films (Single bid) 6 4800/- 49) Cabinet for slides (Single bid) 12 800/- 50) Hot air oven for drying slides (Single bid) 2 4200/- 51) Balance Ear hanger (Single bid) 4 600/-

52) Research microscope (Single bid) 4 2600/- 53) Mobile/portable pedestal operating Surgical light (Two

Bid) 12 24000/-

54) Dissection Microscope – stereo type (Two Bid) 10 40000/- 55) Semi automatic rotary Microtome (single Bid) 2 1200/- 56) Microtome Sledge large cutting. (single Bid) 2 1200/- 57) Paraffin embedding bath [6 cup & 8 Shelves] (Single Bid) 2 400/- 58) Hot plate for flattering sections (single Bid) 4 400/-

Equipment for the department of Microbiology 59) Incubator (Single bid) 2 4200/- 60) Hot Air oven (Single bid) 2 3000/- 61) VDRL Shaker (Single bid) 4 600/- 62) Vertex Mixer (Single bid) 2 300/- 63) Chemical Balance (Single bid) 4 4200/- 64) Inspissator (Single bid) 2 900/- 65) Deep Freezer -70°C (Two Bid) 2 12000/- 66) Deep Freezer -20°C (Two Bid) 2 12000/- 67) BOD Incubator (Two Bid) – Retender 2 10000/-

Equipment for the department of Anesthesia 68) Vital Sign Monitor(Single bid) 8 2400/- 69) Proseal LMA, Size 1,2,3,4(Single bid) 2 each 8400/- 70) Classic LMA, Size 1,2,3,4(Single bid) 2 each 8400/- 71) Intubating LMA size 3, 4(Single bid) 2 each 4200/- 72) Ambubags – Adult (Single bid) 10 9000/- 73) Ambubag – pediatric (Single bid) 2 2000/- 74) Ethylene oxide sterilizer (Two Bid) – Retender 2 9000/- 75) Peripheral nerve stimulator (Two Bid) – Retender 2 6000/-

Equipment for the department of Ophthalmology 76) Wet field Bipolar cautery (Single bid) 2 1500/- 77) Small Pupil Indirect ophthalmoscope (Single bid) 2 4000/- 78) Visual field analyzer (Two Bid) 2 40000/-

Equipment for the department of Pediatrics 79) Bubble C Pap (Two Bid) – Retender 8 8000/-

Equipment for the department of pathology 80) Slide cabinet (single bid) 6 12000/- 81) Block cabinet (single bid) 6 12000/-

Terms and Conditions:- 1. Only manufacturer, authorized distributor / dealer can participate in the tender. Tenderer

should submit authorization by the manufacturer in case he is distributor or dealer and for CMC.

2. Tenderer should quote the basic price of the equipment. Local taxes as applicable should be quoted separately. Form ‘D’ will not be provided by the hospital. Any disposables necessary/required to be quoted separately.

3. Name of the manufacturer and model should be indicated in the quotation / tender.

4. Technical information provided by the manufacturer along with the check list of specification provided should be enclosed along with the technical bid quotation in any case, and separate financial bid covers, both put in a third bigger envelope in two bid system marked “Technical / financial”. EMD and cost of application (if downloading from website) to be enclosed to Technical Bid in technical bid envelope.

5. E.M.D: Tenderer should enclose E.M.D with technical bid envelope by way of Demand Draft / Banker’s Cheque payable at State Bank of India, Bangalore- in favor of “ E.S.I.C A/c No. 1” which will not bear any interest and will be refunded after finalization of the tender or within 6 months whichever is earlier.

EMD draft has to be enclosed to item wise tenders and in case of two bid system EMD should be available in the Technical bid cover.

6. Separate EMD should be produced for each equipment, Quoted in separate application forms.

7. The successful Tenderer should submit 10% of the cost of equipment as security deposit (Non interest bearing), which will be retained in bank and will be refunded after the completion of Warranty period and after entry into CMC contract.

8. Warranty: The Tenderer should provide 2 years warranty by the manufacturer after satisfactory installation of the equipment.

9. AMC & CMC: The Tenderer should quote year wise rates for AMC & CMC in the Financial Bid (lump sum and / or percentage) approved by the manufacturer comprehensive M.C of the equipment for a minimum period of 5 years after the completion of warranty period. Only agency / person authorized by the manufacturer shall provide after sales service under CMC and should have the service arrangement /center at Bangalore with 24 hours down time response. Rates Comprehensive Maintenance Contract (inclusive of spare parts) should be provided for 4 preventive and unlimited breakdown calls. If the firm doesn’t quote for CMC their quotation may be rejected. They should enclose an after sales service undertaking from authorized firms.

10. If the equipment cannot be repaired and returned within 24 Hours, a stand by service equipment is to be provided till the equipment is repaired and returned.

11. Calibration certificate of Equipment at 6 monthly interval should be provided free of cost along with standard traceability certificate in Warranty and AMC & CMC period.

12. Rates quoted should be valid for one year from the date of supply order.

13. Undertaking by the Manufacturer that spares will be made available during the period of A.M.C, should be enclosed along with the Quotation / tender.

14. Separate Application - item wise, and Documents form fee of Rs. 200/- per item non refundable payable by crossed Banker's cheque / DD in favour of ESIC A/C No.1, payable at Bangalore along with the application for obtaining tender document in person.

Application money as a single DD for multiple tender applications will be accepted with a list of items tendered or quoted with a Xerox copy of the list and the Xerox copy of the DD is to be enclosed with every item tendered separately and marked.

15. Specimen copy of C.M.C terms and conditions should be enclosed along with the quotation / tender. CMC Amount for each year will be paid in 2 equal installments first after completion of warranty and 2nd after satisfactory completion of CMC service. If full year advance is required

Bank guarantee for same amount is required.

16. List of institutions (preferably Government) where similar equipment has been installed should be enclosed along with the quotation / tender.

17. Tenderer should undertake the responsibility for installation of the equipment by the authorized representative of manufacturer.

18. Training of hospital staff in the use of the equipment should be undertaken by the manufacturer, in case, so required. Training should be free of cost and should be given within the hospital premises as far as possible.

19. Packaging, insurance, transport and any other incidental expenditure involved in the supply, installation and commissioning of the equipment shall be borne by the tenderer.

20. Venue, date & time for issue of tenders / Documents: from 19/09/2011 to 20/10/2011, 10.a.m. to 3.p.m. at General Branch, ESIC Model Hospital, Rajajinagar, Bangalore – 10.

21. Last date for receipt of completed tender Documents: 20/10/2011, up to 3.00.p.m. or if it happens to be holiday on next working day.

22. Pre bid discussion regarding the specifications and all other doubts will be held on 03/10/2011, at 2.00pm. in the old conference hall in presence of HODs of the corresponding Departments.

23. Date of opening the tender will be intimated after sorting out of all tenders after opening the single tender box on 21/10/2011 at 2 p.m. in the old conference hall, first floor of the Hospital or next working day if it happens to be a holiday.

24. Tenderer should be ready to physically demonstrate the quoted equipment to the committee at his own cost at this Hospital premises or in Bangalore within the prescribed time.

25. No advance payment will be made. Settlement of bill will be made within 4 weeks of satisfactory installation and working.

26. Delivery of items should be made within 4 weeks of giving supply order.

27. Breach of any terms and conditions attracts penalty by way of forfeiture of EMD or security deposit or recovery of repair charges.

28. Any condition from the bidder will be null and void and in case EMD will not be refunded

29. Check list of specifications verification (Format is provided) by bidder is compulsory and those not matching basic specifications will be summarily rejected.

30. Any firm claiming exemption from Application fee, EMD and Security deposit should give relevant valid documents along with their application form and otherwise which will not be considered.

31. Medical superintendent of E.S.I.C Model Hospital reserves right to accept or reject, any or all the tenders without assigning any reason what so ever.

32. This Tender Terms and conditions etc are subject to Bangalore Jurisdiction only.

33. The number of equipments mentioned in the list of items may be increased or decreased depending upon the requirement.

34. Tenderer should quote basic price excluding taxes and the cost of transport only to Coimbatore should be indicated separately.

35. Wherever applicable, the equipment quoted must support interface/integration for data transfer from equipments to third party hospital management applications. Firm should also provide technical documents explaining the prerequisites data exchange format and detailed user and technical manuals explaining how to integrate and transfer data with third party hospital management applications. Also they should provide needed hardware drivers and technical support to integrate the equipments with third party hospital management applications.

Medical Superintendent.

Specification Self Verification check list

Name of the Quoting Firm:

Name of the Equipment:

Serial No. of Equipment as in the list of equipment published:

Model:

Make:

Manufacturer:

Sl. No.

Specifications provided/published by ESICMH & PGIMSR

Whether the quoted model (as above) of Equipment has this particular feature (Indicate YES/NO)

Deviation if Any

Certified that I have verified the above specifications with respect to the items and technical specifications of the above items.

Date: Signature of Authorized Person Place: with Name, stamp & Seal

ANNEXURE - I UNDER TAKING

Date of opening:- Item No.:-

Name of the Items:-

To, The Medical Superintendent, ESIC Model Hospital, Rajajinagar, Bangalore – 560 010. Sir, 1. The undersigned certify that I have gone through the terms and conditions mentioned in the

instruction supplement and undertake to comply with them. The rates quoted by me \ us are valid and binding on me \ us for acceptance for the period w.e.f. ……………………… to ……………..

2. It is certified that rate quoted are the lowest quoted for any institution \ Hospital in India. 3. Earnest Money deposited by me \ us Viz Rs________________________ in the form Demand

Draft\ Banker’s cheque in favour of ESIC fund Account No.1, Rajajinagar, Bangalore is attached herewith and shall remain in custody of the Medical Superintendent, ESIC MH, RNR, B’lore till the successful installation and payment of security deposit.

4. I \ We give the rights to Medical Superintendent, to forfeit the Earnest money deposited by me \ us any delay occur on my \ agent’s part or failed to supply the article at the appointed place and time of the items of the desired quality.

I undertake that I will be in position to provide Annual Maintenance, Contract \ Comprehensive Maintenance Contract (AMC \ CMC ) spare parts, and consumables for 5 years after completion of guarantee period I also undertake to keep the equipment in running order throughout the year and in case of equipment going out of order. The fault will be attended within 24 hours of lodging the complaint or a standby will be provided failing which a penalty of 0.5% of the cost of the AMC \ CMC of the equipment per day for the period equipment remains out of order will be levied during comprehensive AMC \ CMC and guarantee \ warranty period. 5. There is no vigilance \ CBI case or court case pending against the firm \ supplier. 6. Should the said officer deem it necessary to change any article, if being found not as per supply

orders, it shall be replaced by me \ us in time to prevent any inconvenience. 7. I hereby undertake to supply the items as per directions given in supply order within the

stipulated period. 8. I undertake to provide guarantee \ warranty for a minimum period of two years or as mentioned

in specifications from the date of satisfactory equipment and inspection. I also undertake that I will maintain the equipment during this period and replace the defected parts at free of cost, if necessary.

9. I understand that The Medical Superintendent has the right to accept or reject any or all the tenders without assigning any reason(s) thereof.

10. The rates quoted are current hospital ruling rates and not higher than MRP inclusive of Taxes.

Signature and address of the Tenderer with Rubber stamp.

ANNEXURE – II AUTHORISATION CERTIFICATE

To The Medical Superintendent, ESIC Model Hospital, Rajajinagar, Bangalore – 10. Dear Sir, Authority Letter Against Tender No ……………………………………………..Due on …………. Item\s quoted ………………………………………………………………… ……………………………………………………………………………….. We _________________________________________________, who are established and reputable manufacturers of _________________________________ having factory at ____________________________________ and hereby authorize M\S ___________________________________________(name and address of agent) to Bid, negotiate and conclude the contract with you against above tender No. for the above goods manufactured by us. We company or firm or individual other than M\S ___________________________________ _________________________ are authorized to Bid, negotiate and conclude the contact in regard to this business against this specific tender as also for all business in the entire territory of India. We hereby extend our full guarantee \ warranty as per clause at Sl. No. 8 of the conditions of contract for the goods offered for supply against this invitation for Bid by the above firms. We also confirm that the spares and any other miscellaneous items (as applicable) of the equipment quoted will be freely available for at least five years after expiry of warranty\guarantee period. Our other responsibilities Includes: 1. Information regarding the name of new agent, in case of change of agent. 2. _________________________________________________ (Here specify in detail manufacturer’s responsibilities) The services to be rendered by M\S ________________________________ Are as under: 1. ____________________________________________________ 2. ____________________________________________________ (Here specify the services to be rendered by the agent) Yours faithfully, (Name of Manufacturer) For and on behalf of M\S ___________________ (Name of Manufacturer’s) NOTE: This letter of authorization should be on the letter head of the manufacturing concern and should be signed by a person competent and having the

D E C L A R A T I O N F O R M

TENDERERS MUST GIVE SPECIFIC ANSWERS AGAINST EACH OF THE FOLLOWING QUESTION.

1. (i) Brand & Model (ii) Name and address of manufacturer (iii) Station of manufacture 2. Guarantee date by which delivery can be completed.

3. Stock in hand at the present time consists of:

(a) Held by us………………………………..

(b) Held by M\S ………………………………. over which we have secured an option. 4. Here state specifically whether the price tendered by you is to the best of your knowledge and belief not more than the price which Is permissible for you to charge as private purchaser for the same class and description of goods under the provision of any law for the time being in force, if not, state the reasons and the margin profit included. 5. Business name and constitution of tendering firm: Is the firm registered under?

(i) The India companied Act 1913 (ii) The India partnership Act, 1932

(iii) Any act, if not, who are owners (Please give full names) Dated the……………….. Signature

Specifications of the equipments/ Instruments

1. Specifications for Temperature Humidity Data logger (Dept. Of Biochemistry Central Research Laboratory) a. Specifications

i. Measuring range: -40 to 70/0 to 100%RH ii. Accuracy: ±1C / ±3% RH

iii. Resolution: ± 0.1C / ±0.1% RH iv. Sampling rate: configurable from 1sec to 24Hr. v. Operating Temp: - 40 to 70°C

vi. Power supply: 1/2AA 3.6V Lithium Battery vii. Dimension: 94 X 48 X 33 mm

viii. Weight : 115gm b. Features

i. Local Display ii. Memory of 32000 readings

iii. Fast response and cost effective model iv. Selective Logging interval v. Long battery life

vi. USB Interface for Set up and data download vii. User programmable alarm thresholds

viii. LCD to show time and date ix. External lock facility to avoid nay theft x. AMC/CMC : for 05 years

2. Specifications for Micro Balance (Dept. Of Biochemistry Central Research Laboratory) a. Capacity: 300gm b. Readability: 0.001gm c. Repeatability : 0.001gm d. Linearity: ±0.002gm e. Pan Size: 90m f. Response time: 3 – 4 Sec g. Calibration: automatic external h. Tare Range: full i. Operating temperature : 15C to 30C j. Housing Dimension: 195X275X406mm k. Weight approx. 6.7Kg l. Power Supply: AC Adaptor 220V or 50 – 60 Hz m. Automatic external calibration n. Multifunction Weighing units o. A built in under hook for below weighing p. Easy to read VFD display q. Density Measurement for solid and liquid r. Standard RS 232C interface s. High resolution, quick weighing, accurate result t. Based on E.M.F.C technology

u. S.S. Weighing pan, level Indicator, adjustable fit v. Tare range up to Max. capacity of the balance w. AMC/CMC: for 05 years

3. Microscopes for Department of Biochemistry Microscope should have co Axial Coarse and fine movements actuated by sophisticated ball-bearing gear system. Built in mechanical stage with co-axial control knobs positioned low. The microscope should be having anti fungus treated, HEA coated optics and ergonomically designed for excellent for working convenience. It should have inclined monocular head at 45 degree, rotatable 0 – 360 degree. The eye piece should be 10X wide field. 40X (SL) and 100X (SL) oil Immersion. It should have LED Illumination with controls and built in back up of approximately 24 Hrs through rechargeable cells or illumination through Plano concave mirror.

4. Water bath Rectangular: Thermostatic Control/; Boiling water baths with lids having 8 – 12 holes ( for UG, Biochemistry)

Temperature range from ambient to 95°C. Thermostatic control with an accuracy of +/- 1C. double walled with inner wall of stainless steel and outer of MS powder coated, with Lids of SS. The unit is provided with immersion type heaters top work on 220VAC. The unit is supplied with indicating lamps, main chord and Plug. Size of Inner chamber – 355X405X100mm; 1 5kw

5. Autoclave Vertical Model – Electrically operated ( for UG, Biochemistry)

Boiler, lid and flange are all made of thick gauge stainless steel and argon arc welded for high safety. Electrically heated. A neoprene rubber gasket is provided on the flanges, which helps the lid to seat properly thereby eliminating steam loss. A pedal lifting arrangement is provided for easy operation. The unit is provided with water drainage arrangement. The unit is provided with pressure gauge, steam release cock and safety valve. The unit is tested at 25psi by hydraulic pressure. The operating pressure is 15psi. The thick MS Stand is provided and supplied with main chord and plug. Size of the inner chamber 550X350mm.

6. Balance Open Pan type ( for UG, Biochemistry) Open pan triple beam 610gms or electronic/digital single pan.

7. Balance semi Micro ( for UG, Biochemistry) Single pan mechanical type; new generation semi – micro balance for every day laboratory use. Capacity/ readability: 42g/0.01mg-210g/0.1mg one touch calibration easy access to door system, winct – windows communication tools, automatic adjustable environment setting.

8. Balance Micro (Electronic) ( for UG, Biochemistry) Micro analytical balances 0.0001 to 220g. motorized internal calibration; ISO GLP compliance (optional); multiple weighing units; standard bidirectional RS 232 interface; poly function: % weighing, counting, fill mode, GSM back light LCD Display; density determination kit (optional)

9. Constant temperature Water Bath( for UG, Biochemistry) (17”X10”X9”); or serological water bath is double walled filled with high grade glass wool insulation between the two chambers. Outer chamber of serological water bath

is made of mild steel with power coating and inner chamber is made of stainless steel. 7.5 Litres. Cap, Inner chamber size [WXLXD]- 25X20X15cmc; excluding heater power in [W]1000.

10. Laboratory Incubator Electric with Thermostat – (for UG, Biochemistry & Central research Laboratory)

Temperature range above ambient to 65°C, thermostatic control with a sensitivity of +/-1C. heating elements are provided at the bottom of the chamber. Double walled with inner chamber of either SS or aluminium. Outer made of MS with powder coating. The gap is filled with glass wool form insulation. The unit comes with wire mesh shelves, indicating lamp, main chord and plug. Size: 60X60X60cm inner chamber made of SS; Accessories to be provided: compulsory a. fan for circulation of air inside the chamber, b. digital temperature controller cum indicator.

11. Hot air oven (for the department of Biochemistry) Bottom heated - temperature range 250°C. Thermostatic controlled with an accuracy of +/- 1 °C. Double walled inside made of either SS or aluminium and outer with MS duly powder coated finish. The gap is filled with glass wool for insulation. Heaters are provided at the bottom. The unit is supplied with wire mesh shelves and it works at 220VAC. The unit is supplied with indicating lamp, main chord and plug; size of the inner chamber aluminium inner chamber SS inner chamber 605X605X605mm. accessories: (compulsory for higher sizes)a. digital temperature controller cum indicator : 2400.00b. fan for air circulation; 1400.00

12. Vacuum pump (for the department of Biochemistry) 35 lit. capacity; single stage; oil sealed air cooled V – Belt driven and mounted on a base plate with belt guard etc. with motor 220VAC single phase.

13. Colorimeter(for the department of Biochemistry) Specifications Required: Wavelength Range: 400-700nm with 8 optional filters Filter’s peak: 420nm, 440nm. Wavelength(Typical): 490nm, 520nm, 540nm, 570nm, 600nm, 700nm Measuring Modes: % T, ABS, CONC and K Factor Photometric resolution: 0.1%T, 0.01 ABS up to 1.99 ABS (O.D.) Display: 3 – Digit LCD Concentration Setting Limit: absorbance read out (with decimal point removed) Sample value (Min.): 1ml in 4ml cuvet/test tubes Director: hermetically sealed photodiode Power: 230V+/-10%, 50Hz.

14. Flame photometer(for the department of Biochemistry)

a. Up to four elements should be measurable with single aspiration. b. Automatic filter selection (Narrow band interface) c. Automatic settings of electronic systems d. Curve fittings for non linear range(up to minimum 05 standards) e. Calibration should be storable in memory f. Provision for re-standardization g. Record should be storable pertaining to date and time analysis h. Provision for saved set up to minimize operation steps. i. Measurement results should be recalled later on with display and print out (330

Max). Element Serum Urine Bio – Fluids Na 100-200meq//1: 100dil 0-250meq//1: 100dil All the four elements up

to 250meq// with 1: 200dil

K 0-10meq//1: 100dil 0-100meq//1: 200dil LI 0-2meq//1:10dil Ca 0-10meq//1:2dil

j. Filters (10nm Typical): Na and K (must) Li and Ca (optional) k. Reproducibility: should be atleast +/-2%f.s. l. Aspiration Time: should be (5 sec + Avg. time) per element + 4 sec. m. Air compressor: with built- in air regulator and air filter deliver stable and moisture /

oil free air supply n. Fuel gas: LPG o. Power supply: should be 230VAC+/-10%, 50Hz.

15. Distilled water still with stainless steel , wall mountable model ( for UG, Biochemistry, Anatomy and Physiology)

Manesty type water still: made of all stainless steel; output 4Lt./hr approx.; work on 220VAC; the condenser can be opened easily for periodic cleaning., designed to provide pyrogen free distilled water easily. Complete unit made of stainless steel. The lid perfectly rest and get sealed inside the collar on the head of the tank which avoids loss of steam and jumping of lid., easy wall mounting.

16. All Quartz double distillation apparatus( for UG, Biochemistry, Anatomy and Physiology)

Apparatus (5 Lit. capacity); double stage 5Lit/hr with metallic stand and other acc. All quartz single unit double stage apparatus with 5lit/hr capacity

17. High speed centrifuge (for the department of Biochemistry) Laboratory equipment centrifuge machine high speed – heavy duty Sturdy MS Body, well painted finish, with maximum speed of 6000RPM at 10/12 tube of 15ml total square body, with lid lock manual type, speed control by analogue know, digital display of timer, timer time 0-60 minutes speed display is digital, speed setting with help of knob, auto off if lid is open, lid breaking system provided, power consumption 500Watt, power requirement 220V and 50 to 60Hz, weight approx. 15Kgs, total noiseless operation, non vibration, complete with head and power lead.

18. pH meter (for the department of Biochemistry) Digital Electronic (Table/ hand held model); comprehensive range of PH meters which includes

digital PH meter, Hand held PH meter, PH testing meter etc. PH meters are made up using best quality parts and equipments. PH Range: 0-14PH. Mill Volt range: 0 to 1999mv. Resolution: 0.01ph, 1mv. Repeatability: +/- 0.01PH +/- 1mV. Accuracy: 0.01 PH+/- 1 digit, 1mV +/- 1 digit. Temperature compensation: 0 to 100deg C. operating temperature: 10 Deg C to 50 Deg C. display: 3.5 digit LED display. Supplied accessories: Electrode, Stand, dust cover and instruction manual.

19. Tissue homogenizer complete set (for the department of Biochemistry)

The tissue – tearor is a rotor /stator type tissue homogenizer which can rapidly homogenize, disperse and emulsify samples in 0.2 – 1000ml of liquid. During operation the suspended material is drawn in to the core of the homogenizer by a rotor turning up to 35000rpm. The material is repeatedly cycled through six narrow slits in the stator where it is rapidly sheared and disintegrated by high frequency mechanical action. Complete homogenization of tissues (muscle, liver, breast tissue etc.) is usually achieved in 10-30seconds. Little if any heat is produced during the process; the tissue - tearer shall come in complete - that is both motor and probe (aka, generator dispersing tool) are included in one price only. Features….. Used for mixing, emulsification, shredding or chopping. Practical answer for small samples. Easy to hold and light weight for one hand operation. Can also be stand mounted. Autoclavable stainless steel probes. Insert to aggressive solutions, Inert to aggressive solutions, all probes are interchangeable probes.and are easily removed for clean up; high speed motor. Speed control from 5000 to 35000rpm.

20. UV lamp with fittings (for the department of Biochemistry)

UV Lamps to meet the requirements of our clients. These lamps are effective in eliminating oxides, micro organisms and other contaminants in water. The lamps are manufactured in advanced production units using quality components. Features: high turbulence; non wetting surface; high reliability low maintenance.

21. Paper electrophoresis apparatus (for the department of Biochemistry)

Vertical model with small 3 strips vertical large 06 strips mini power pack for the above 02 models . Electrophoresis apparatus paper strip model: electrophoresis apparatus shall consist of a transparent Perspex sheet cabinet 40X23.75X11. 25cm to accommodate 4 strips of 1.5” X 12” with glass cover provided with safety inter look switch. The cabinet is fitted with leveling screws. The apparatus shall be supplied with power supply for supply from 0-400v and 0.100 milli ampere in 1 milli ampere division resp. this unit consists of a millimeter and voltmeter, polarity reversing switch and connection cable to work on 220v, 50cycles ac mains.

22. Fume cupboard (under TWO BID system) (for the department of Biochemistry)

Floor model – with SS table top, side glass panels, back side should be made of acid and alkali resistant material, transparent front door. It should be complete with blower, gas cock, sink, DOL starter LT/LK, rain protection cowl, PVC electing, working space – 120X60X60cm.

23. Microscope – compound pathological microscope for student’s hematology lab (for departments of Anatomy and Dept. of physiology)

Pathological microscopes are used to make detailed observations for conducting bio medical studies and research, portable, high power magnifying lenses with heavy and well balanced monocular body. The microscopes are supplied with duster and illustrated instruction manual, packed in thermocole boxes with dust cover. Manufactured in compliance with ISI norms, pathological microscopes shall have the following features: Hinged type horse shoe base inclinable from 1 – 90 degree, mechanical tube length: 160+/-1mm; triple revolving nose piece with click stop; focusing by separate course & fine adjustment with graduated scale; fixed square stage 120X120mm with detachable mechanical stage; sub stage Abb”s condenser N.A. 1.25 with iris diaphragm: swing out filter holder moveable by rack and pinion illumination by Piano concave mirror; adjustable down stopper to prevent accidental breakage of the specimen slide optical combination. The illuminating system should be LED with battery backup for 7 – 8 hrs and monocular with 02 eye pieces and eye pieces with 10X and 20X powers are required. The objective lenses 10X, 45X and Oil immersion are required.

24. Incubator electric with thermostat - stage type (for department of physiology)

The oven shall be triple walled convention heated units, in which the outer body is constructed out of the thick PCRC sheet duly pre – treated with primer and rust proofing and painted with long lasting stove enamel or elegantly powder coated. The inner chamber is made of heavy gauge stainless steel sheet of SS – 304 grade. Further, the gap between the walls is filled with high grade mineral glass wool, which ensures maximum thermal efficiency in your ovens. The front panel of the unit is provided with on/off switches, heating & amins indicator lamps and temperature controllers Indirect three side heating system shall be provided in the unit, comprising air heaters made of high grade kanthal A-1 wires of suitable wattage. The warm air shall evenly distributed throughout the chamber through natural convention. The temperature in these ovens starts from 50°C ambient temperature to 250°C; temperature inside hot air ovens shall be controlled with a sensitivity of +1°C or better. Special application for drying histology slides and preferable sizes will be Specifications: Width (In Cm) Diameter (in cm) Height (in cm) Volume (in litres) 45 45 60 125

25. Stethography (Under Two Bid system) (for department of physiology)

1. Stethograph 2. Mary’s or broady’s tambour, 3. Kymograph 4. Stop watch and time marker or physiography

Standard transducer for student physiography 1.. pressure transducer; 2.. respiration belt transducer; 3.. force transducer; 4.. volume transducer; . pulse transducer; 6.. respiration transducer; 7.. temperature transducer; 8.. isotonic transducer; 9.. 03 pin junction box; 10.. 05 pin junction box; Standard accessories with student physiography

Earth lead; ink bottle; EP to EP Lead; fuse, capacity steel wire & motor belt; suitcase as a container, instruction manual; Perspex pen cover; rexine cover; chart paper Z fold (250 fold) single channel; Or chart paper Z fold (250 fold) two channel; or chart paper Z fold (250 fold) three channel; Technical specifications of student physiography No. of channel 1 (1+1) 2(2+1) 3(3+1) Machine dimension: 436*336*168

386*201*168 436*336*168

Couplers size 50*152mm

65*152mm 65*152mm

Channel width Each

70mm 70mm each 70mm

Recording paper 80mm 150mm 160mm Time Marker: governed through – physiograph Stimulator marking at 0.5,1,2,3,5,7,10,20,30,50,100 per sec interval Chart speed: the 9 speed chart drive has three range of 1:10:100 selected by a range selector knob, and electronic stepper control through push buttons to give three speed variations of 1:2:4 between each range giving a total of 9 speeds. Speed selection is both easy and instantaneous

26. Spirometry system(Under Two Bid system) (for department of physiology) Simple spirometer/ students spirometer or vitalograph: peak flow meter – spirometer – packed with features for the expert user; colour touch – screen operation; accurate fleisch pneumatachograph; integral clear, fast printer,; on screen visualization of volume /time and flow/volume curves. Requirement is of 06 L Capacity Spirometry system

27. Recording spirometer/ benedicts Roth spirometer /apparatus (for department of physiology) Benedicts roth spirometer /apparatus – 61 + capacity. Spirometer has a 4 speed electrical recording unit with gravity writing ink well. Valves are easily accessible, soda lime chamber with screw connections in the Centre chamber, drain cocks to all the tubes and container. Sampling cock for connecting the patient to spirometer or atmosphere. The unit is fitted on portable frame. Complete with valves, tubes, mouth piece, nose clip, ink writing well and 50 charts. (for demonstration use)

28. Wrights peak flow meter (for department of physiology) Lower range mini wright PFM (30-40pm) with sterilisable mouth piece

29. Computerized PFT with interpretation facilities (Under Two Bid system) (for department of physiology) Pulmonary function test department is equipped with PC based equipment capable of giving data in tabular form for 33 parameters (FVC,SVC, and MVV), pre and post medication option available for comparison Features: complete digital processing; user friendly alpha numeric LCD display; easy to operate; soft touch key pad; audio indication with each function; elaborate prediction equations; optional interpretation facility; fast and noise free printing; well formatted report; 14 measurement parameters Should have ERS base standard with data correction facility for Indian population

30. Mechanical respirator (Under Two Bid system) (for department of physiology)

1. Drinkers tank respirator (from lung) 2. Sahlin’s jacket model, brag – paul pulsator 3. Foldable canvas stretcher for eve’s rocking method

31. Perimeter (for department of physiology) Students Perimeter – charting the field of vision; with stand, metal arc; chin rest and chart paper etc.

32. ECG Machine –Single channel(for department of physiology) a) Digital one channel ECG machine b) Simultaneous 12 leads acquisition c) Multiple operation mode (Manual/auto/ref. lead) d) LCD to display operation status and wave – form e) The wave form is displaying synchronously on the LCD with 195X65 dots f) AC/DC power, built in rechargeable Ni-MH battery g) High resolution thermal printing array system h) High frequency response reach to 150Hz i) Capable of printing continuous one channel trace and annotations including lead

marks and such parameters as sensitivity, paper speed, and filter operation status. j) High resolution digital inhibits baseline k) One touch operation able to enhance efficiency and relieve operation strain l) Concept of floating input circuit meets IEC safety standard m) Visual status due to light indicated touch keys n) Rechargeable battery supporting more than 50 patient examinations o) Under the automatic mode, pressing key mode continuously can keep recording

when abnormal lead is found. p) Safety level corresponds to class I, type CF

33. ECG Machine –multi channel(for department of physiology) High resolution thermal array printer; 6/7/12 channel print out format 5 inch 320X240lcd to display setting menu and 12 channel ECG wave form automatic measurement and interpretation of ECG paper size: 210mmX20m (roll type) 210X140mmX20m (z-fold type)

34. Electromyogram (TWO BID) (for department of physiology) EMG amplifier module/EL 503 shielded snap electrodes or 3 surface electrode/stimulating and recording electrode, electronic stimulator, a recording system of cathode ray oscilloscope (CRO)/ bio potential coupler.

The requirement is for 08 channel with all standard accessories like evoked potential, ECG, EMG, EEG, EOG etc. and should be upgradable. Optional should be quoted separately.

35. Ultra sonography (for department of physiology) Portable – demo piece; low end model

36. EEG Machine Recorder – portable (TWO Bid) (for department of physiology)

EEG 100B amplifier module with CAP 100 EEG electrode cap/with electrodes and cardiac jelly; EEG (Electroencephalograph) Features: A device being used by neurologists Light weight and compact amplifier; USB 2.0 interface/Ethernet interface; synchronized high resolution MPEG-4 video; integrated photic stimulator; integrated impedance check for electrode connectivity; unlimited nos. of montages; unlimited continuous recording along with video (optional)

Requirement is 32 channel machine

37. Audiometry (for department of physiology) Audiometry & tympanometry in one instrument; portable – demo piece; special Audiometry window; MPANL (maximum permissible ambient noise level) specified internationally by standard institutes like OSHA and ANSI for proper acoustic treatment.

38. Physiograph(TWO BID) (for department of physiology) Single channel, electronic recorder and electronic stimulator with

1. Main console – chart drive, pen recording system; main amplifier; coupler housing and

2. Couplers - bio potential coupler; electrocardiogram (EKG); and stain gage coupler;

3. Stimulator

39. Multichannel poly graph – computerized (TWO BID) (for department of physiology)

4/8/16 channel data acquisition and analysis system (MP 100 WSP with acq. Knowledge software) Accessories: STM 100A; EMG 100B; STM ISO; EL 300 electrode pairs; LEAD 100 electrode leads; LEAD 100S Leads; EL 503 electrode; GSR100B Electro – dermal activity amplifier module; TSD 103A electro – dermal activity electrodes; electrode gel; measuring tape.

40. Apparatus for continuous passive motion. (TWO BID) (for department of physiology)

CPM is used to treat joints of the lower limb after an injury, disease or following surgery. Based on a concept originated by SALTER IN 1970, this device has varied applications namely treatment of intra articular fractures, septic arthritis, ligaments tendon healing and also following total joint replacement to ensure a sufficient range of motion. To prevent stiffening , the jouint have to be moved continuously which results in the following.

� Minimize swelling and pain after operation � Ensures faster recovery and shortened hospital stay � Prevents extra articular contractures and adhesions.

Ext/Flex Angle indicator at knee position � Compact and elegant construction

� Electronic controls enable all adjustment of angle to be made on the front panel. � Smooth and silent movement � Digital timer with alarm � Patient safety switch for stopping and reversing the motion.

Specifications Treatment time 0 – 99 minutes Reset time 1 to 5 seconds Angle Extension 0 Power 230V/AC/50Hz, 75VA

41. Bicycle ergometer (for department of physiology)

Work Load Range: 10 – 600Watt Independent Rpm: 20 – 130rpm Work Load range Dependent RPM Lap Time: 9h 59min 59sec Load Steps : 1 – 99 Watt Time Steps : 1 – 99 Min Load Programs: Manual 1 Load/Step PWC 170, 150, 130 HR Steady State Safety Protection Automatic Load: Heart rate Reduction: Blood pressure Blood Pressure D Acoustic signal: ECG Alarm Signal Manual : By Stop Button Check: Calibration Dynamic Static Adjustments (Height): 83cm – 110cm Saddle: 68cm – 108mm Handle bars: free rotation Accuracy of load: 2% or 3 Watt Input/output External Control: RS - 232 Inputs: Analogue control Start signal Heart rate Blood pressure s Blood pressure D ECG Alarm Outputs: work load Pedaling Speed Step Marker Power supply: 110 – 240V, 50 – 60Hz

Power consumption: 100VA Safety Standard: class 1, CE Dimensions (cm): Base plate 79X48 Weight: approx 46Kg.

42. Dynamometer (TWO BID) (for department of physiology) Especially suitable for use in rehabilitation centers/physiology labs; Real time mode: immediately shows the patients current strength Peak/Max Mode: shows the maximum strength of a patient’s grip Average Mode: calculates the average strength from two grips Counting mode: counts the numbers of presses which exceed a previously defined strength limit; integrated AUTO – OFF function after 1 minute to preserve the batteries; as part of a rehabilitation program, this permits medical staff to monitor the fitness of the patients hands and carry out controlled training exchangeable springs facilitate fast switching of the capacity (Additional spring sets for 20Kg and 40Kg are included with delivery); safe, comfortable use thanks to non slip rubber grips Stable case for safe, easy transport and for storage of the additional spring sets as standard, WXDXH: 350X265X85mm

43. Calorimeter(for department of physiology) Photoelectric calorimeter with 8 filter digital Digital calorimeter – highly stable and accurate ideal clinical instruments for blood and chemical analysis. Models available ME 953 C 5 filter ME 954C8 filter ME 944 C 8 filter with battery option. Range: 400nm to 700nm filters 5 high standard filters, Accuracy: +/-0.02O.D., Out Put Optional, Density 0 to 1.99, display 2.5 digit LED display, detector selenium photo cell, light source 6.2V 0.3 Amp. Tungsten filament Lamp, Min. volume 1ml., power 230V+/- 10% 50Hz Ac., size (LXBXH) 225X230X150mm, weight: 4Kg.(Approx), Accessories Test Tubes 5 Nos, Light Source Bulb, Dust Cover, Instruction Manual.

44. Electronic Muscle stimulator (for department of physiology) Research model: Muscle Stimulator

Compact Solid-state Microprocessor Controlled unit, with digital timer and intensity display is useful for functional paralysis resulting from traumatic neurosis, Hysterical of Neuropraxia, Flaccid Paralysis, Spastic Paralysis, Cardio-vascular disorders and Muscle Strain etc. The Therapeutic Muscle Stimulator has Galvanic, Interrupted Galvanic, Faradic and Surge Faradic currents. The unit shall be housed with ABS molded cabinet. Salient Features Microprocessor controlled Pulse durations: 03,1,10,30,100,300ms Pulse Repetitive Freq.:0.3,1,3 seconds Intensity variations: 0 130 Volts Technical details Weight:1.6Kg.Height:139.7mm ,Width:266.7mm Depth:190.5mm Voltage: AC 100 260 Protection Class-I Complies with IEC 601-1 Option for Built-in rechargeable battery.

45. Balance analytical (for department of physiology) � Standard features: � Easy to read Large back light GRAPHICAL LCD display with

A.E.P.(Advanced Eye protection)(NEW) � Standard RS 232C Interface Ps/2 output � Hanger for Below Balance weighing � Fully automatic internal Calibration with built in weight

� Complies GLP/GMP. � Dye cast aluminium design for long term stability and accurate results. � Various weighing units like, mg,ct.oz,dwt,mon,GN � User selectable Stability and filter level Spacious draft shield interior.

Technical data: Capacity 220 gm: Readability 0.1mg: REPEATABILITY (+/-)

46. Embalming workstation with embalming machine or cadever injector (for department of Anatomy)

� Complete workstation containing embalming trolley and embalming machine. � Suited to equip embalming machine. � Trolley made of complete SS manufactured without rivets or bolts on the

surface � Manual ratchet system provided for trendelenburg position. � Embalming machine mounted on the underlying frame for complete system

transportation. � Embalming machine can be dismounted and used separately. � Provided with heavy castors for easy movement with or without embalming

machine. � Embalming trolley approx 60” lengthX28”widthX34”height � Embalming machine uses specialized noiseless pump for suction and delivery

at preset optimum pressure. � Fluid delivery rate 101ltrs./hr. � SS inner tank with fluid capacity provided. � Complete SS Outer body mounted provided � Complete SS outer body mounted on castors � Approx Size of the EM – 05, 24” lengthX19” width X 14.5” height

Embalming machine with its specialized noise less pump, provide suction and delivery at optimum pressure with a fluid delivery rate of 10Litres/hr with salient features such as

� SS Inner tank to store fluid capacity 10-15 liters � Mounted on castors for easy movement and grips provided for lifting � IV stand fixed for mounting cannula tubing and mains cable � Mains-on and in use indication provided � Complete stainless steel outer body/ and / or � Cadaverous injector

For injecting formaldehyde solution in Cadaverous at much higher speed than normal gravity process. Unit is fully covered and mounted on a portable trolley having four castor wheels for easy movement. Unit consists of one air compressor fitted with 1/2hp motor which is connected with a stainless steel tank of 10 liters capacity meant for storing and injecting the solution. Tank is fitted with a safety valve, pressure gauge and rubber tubing having provision for injection and supplied complete with electric cord, plug and suitable to work on 220V, 1ph 50hz, AC supply.

47. Mortuary cooler with arrangement to keep 4/6 bodies(for department of Anatomy)

Mortuary cabinet – to store at least 8 Cadaverous/bodies Mortuary coolers are designed to be a reliable and durable part of hospital equipment.

With complete knock down construction it can be easily assembled at site Temperature range: 2 to 8 degree Celsius Hermetically closed hinged doors for low power consumption and high efficiency Servo controlled voltage stabilizer (5KVA) with time delay for complete peace of mind in case of power fluctuation. Pre engineered poly urethane foam panels sand witched in high quality SS sheets with total thickness of 60mm for excellent insulation. All stainless steel construction completely rust free; vapor proof incandescent lamp mounted glows on door opening Mortuary Carriage Carriage is made of a three piece assembly which includes a stationary frame carriage and upper carriage. The lower carriage and upper carriage assemblies ride on wheels and tracks that allow easy telescopic action. The complete assembly is automatically locked when returned to closed position. Mortuary tray One piece stainless steel tray (to accommodate a cadaver of Max. 7ft. length) with edge (16G) and handles on both ends (12G) Refrigeration System: Heavy duty self contained, compact and unitary type with hermitically sealed compressors with air cooled refrigeration system and energy efficient machines capable of operation at 230V, 50Hz, 1PH, Ac supply. Thermostat controlled Security locks to prevent unintentional switch off. Temperature performance in range 20C to 80C to ambient temperature of up to 400C Current capacity: 6 – 15 amp; Refrigerant: R22 Refrigeration Capacity: at 400C at room temperature, 5000BTU/Hr Control system: digital temperature Indicator – cum – controller with PT – 100 Sensors, continuously monitors and displays the mortuary temperatures Alarm audio – visual alarm in case of temperature variation beyond limit due to power failure or any other reason. Thermometer: dial type capillary thermometer

48. X – Ray Viewing lobby (double or 4 films) (for department of Anatomy) 4 panel side by side X – Ray View box illuminator Standard features: 2 lamps (F15IT8/D) per panel, roller gravity film holding systems, durable steel construction, thin 3” profile, chip Resistenat hospital white finish, continuous bottom film ledge, even vue reflective system, UL and cUL listed, Centralized cluster on/off switching; optional features: FAS – film activated switching, MS – Master Switch, HGP – Hospital Grade Plug Specs: surface wall mount 4 panel side by side 56”X17” viewing area overall Dimensions: 56” L 21” H3 3/8 D. illumination: 2000cd/m2. Approximate weight 84lbs.

49. Cabinet for slides (for department of Anatomy) Wrap proof, break proof molded plastic/ wooden boxes for storage of prepared microscopic slides. Have slots to accommodate 1000 slides with lid./ wooden with hinged lid, slides are held in numbered slots and there is an index inside the lid.

50. Hot air oven for drying slides for drying slides (45 degree Celsius) 18”X18”X18” (for department of Anatomy)

Lab model with three side heating elements Construction: with double walled construction. Inner chamber made of Aluminium or

stainless steel sheet. Outer chamber is made of mild steel sheet, finished with powder coated paint. The gap between the walls is filled up with special grade glass wool for proper insulation to avoid heat losses. Inner chamber has ribs for placing the shelves at convenient levels. Supplied with 2 or 3 removable shelves. It is fitted with heavy hinges with a ball catcher, spring loaded door closing device. Door is duly insulated. Elements: heating elements are made of high quality nickel/chrome plated nichrome wire which are put inside beads and placed at the bottom and in both the side ribs for uniform temperature all over the work space. Temperature Control: temperature is controlled by imported capillary type thermostat from 50°C to 250°C +/- 1°C. Temperature control knob is graduated in centigrade degrees. Ovens are supplied without thermometer. Ventilation: air ventilators are placed near the top of the both sides to remove hot gasses and fumes if any. Control Panel: comprising of switch to ON/OFF the power, switch to select high or low rates of heating, thermostat control knob and indicators for mains and thermostats. Supplied with cord and plug. Suitable to operate on 220 volts, 1ph, 50Hz, AC Supply. Optional Accessories: Air circulating pan, digital display temp indicator, digital display temp controller cum indicator in lieu of thermostat., microprocessor based PID temp. controller cum indicator in lieu of thermostat., L shaped thermometer (Mercury) or straight type. Timer Size of inner chamber WXHXD = 455X455X455mm, No. shelves=2.

51. Balance ear hanger (for department of Anatomy) Capacity: 6 Kilos, Sensitivity 1/5gram, plastic scale A Type of Kitchen weighing scales – 1 Dial type analog display; unbreakable convex lens. Matching body and pan [Sturdy, durable and maintenance free product; 5 to 6 Kg capacities. and Hanger Type circular weighing scales – 1 Dial type analog display; light weight aluminium die cast body; un breakable convex lens; matching body and lens ring; sturdy durable and maintenance free; or Spring Type: In graduated tubular aluminium with zero adjustment, provided with top suspension loop and hook, with dual scale in metric and newton range. 5000grms with precision of 100 grms.

52. Research Microscope(for department of Anatomy) Binocular microscopes with PLAN objectives. Anti fungus finite optical systems; halogen or LED light source options; feather touch co axial focusing mechanism; with digital camera attachment and image processing software; upgradable to phase contrast, florescence, dark field and digital microscopy; Advanced with Camera/LCD attachment.

53. Mobile or portable pedestal operating/surgical light(for department of Anatomy)

Mobile Surgical Light Features: Dome: 1 no; 700mm (normal); dome diameter: 500mm (Nominal) 500mm+/-50mm; spring arm stroke 750mm+/-50mm; field size 150-200mm, 1600mm (Nominal); action radius 1500mm (nominal), 1,75,000 lux(max.); light output 130000Lux(Max.); color temperature: 4200+/-300°K;

halogen bulb 1no., 7 nos. 12V, 50W each/24V 70W 4 nos. 12V, 50W each/24V 70W; low voltage unit with CVT 230V AC+/-10% 230V AC +/- 10%; Input supply: 50Hz+/-2% 50Hz+/-2%; Height adjustment of Dome: 36”36”

54. Dissection Microscope – Stereo Type (for department of Anatomy)

Stereo dissecting microscope – magnification 20X. objective fixed 2X achromatic parfocal 80mm working distance. Coated lens eyepieces WF 10X paired field of view 5.5mm. Fine focus by rack and pinion motion. Adjustable head in height on pole stand. Round glass 82mm stage with black and white matted plate for plate for field contrast. Thermocol packing with instruction manual, dust cover. Optional: WF 15X eye pieces.

55. Semi Automatic Rotary Microtome(for department of Anatomy)

Spencer type advanced microtome Modular system with exceptional precision Best suited for research and routine work in biological, medical or histology lab; guaranteed over extension protection and sliding – clutch anti – locking system in the coarse advance. ; highest precision of sections. The semi automatic unit shall offer Automatic advance for trimming; motorized advance/return of specimen; specimen advance automatic in two speeds. The equipment is supplied complete with Cassette holder; knife holder base; standard knife holder Object orientation unit; section waste tray; microtome knife 15cm Technical data Ranges of thickness 0.5µm to 99 µm Increments of minimum 0.5µm 1 µm step from 1 µm to 99 µm electronically

adjustable Horizontal specimen advance 28mm Vertical stroke 60mm Specimen size Up to 30mmX30mm Specimen orientation X and Y Axis 8°, Z Axis 360° Specimen advance automatic In 2 speeds Advance for trimming 1 – 99 µm adjustable Electrical data 230Volts, 50cycles single phase AC

56. Microtome, Sledge, large Cutting (for department of Anatomy)

Sledge microtome/sliding microtome for cutting large blocks of paraffin and resin embedded material for material for light microscopy. The knife holding clamps shall allow the knife to be offset to the direction of cut, a major advantage when sectioning large, hard blocks. The microtome which is very heavy for stability and not usually subject to vibration, with a feed range of 0 – 20microns

57. Paraffin embedding bath (6 cup and 8 sieves) (for department of Anatomy)

Double walled S.S. inner; Slide drying chamber at bottom, copper cups and tubes with lids and handle; temp. Range: ambient +/- 5 to 65°C; works on 220V AC.

58. Hot Plates for Flattering Sections (Slide warming tablet) 18X12” (for department of Anatomy)

Rectangular or round Hot plate Cast Iron top 200mm, with Energy regulator Sizes: 250X400X150mm, digitally controlled (optional); S.S. Top; works on 220V AC

59. Specifications for Incubator (Dept. Of Microbiology Central Research Laboratory) a. Double walled chamber b. Two doors inner plexi doors c. three side heating elements on three sides of equipment d. digital temperature controller cum indicator with forced air circulation fan e. inner Size: 24”X24”36” f. No. of Shelves : 03

60. Specifications for Hot Air Oven (Dept. Of Microbiology Central Research Laboratory)

a. Three side heating elements on 03 sides of the equipment b. Digital temperature controller cum indicator with forced air circulation fan c. Air ventilator at the top, bottom and also at sides d. Thermostat e. Rotary switch f. On/Off Switch g. 02 Piolet lamps h. Inner size: 24”X24”36” i. No. Of Trays : 03

61. VDRL Shaker – for dept. of Microbiology & Central research Laboratory

a. Bench top, 12”X12” platform size b. Built in timer 0-15minutes c. Maximum speed of 180rpm d. Built in speed regulator

62. Vertex Mixer (Dept. Of Microbiology)

a. 1200rpm b. 220/230VAC c. Size: 12”X12”

63. Chemical Balance – for dept. of Microbiology} a. Capacity : 0 – 1 Kg b. Sensitivity of 1mg

64. Inspissator – for Microbiology a. The water jacket made with mirror polished high quality 304prime S.S sheet framed

with laminated wooden box, the jacket is covered with glass lid, filled with blanket. A provision for water inlet and outlet is provided. Temperature is controlled by an imported thermostat.

b. Inner Dimension: 550X450X350M c. Watts: 1KW-1.5KW

d. Capacity: 100 tubes

65. Deep Freezer ¯70 ْ◌C for Microbiology a. Constructed on double wall, outer made of M.S. Sheet with powder coated and inner

made of S.S. sheet having PUF insulation to minimize heat loss. b. Capillary controlled balanced hermetically sealed refrigeration c. Horizontal model ¯ 70 ْ◌C d. Volume : 425Ltrs e. Dimension: WXDXH: 1300X500X780mm

66. Deep freezer ¯20 ْ◌C for Microbiology

a. Constructed on double wall, outer made of M.S. Sheet with powder coated and inner made of S.S. sheet having PUF insulation to minimize heat loss.

b. Capillary controlled balanced hermetically sealed refrigeration c. Horizontal model ¯20 ْ◌C d. Volume : 425Ltrs e. Dimension: WXDXH: 1300X500X780mm

67. BOD Incubator for Microbiology Double walled construction, inner SS/Alu outer M.S. with beautifully powder coated and with adjustable trays. The plexiglass inner door makes it possible to inspect samples without disturbing the set temperature The instrument is an eco friendly with special compressor and C.F.C free refrigerator, heating systems with powerful air circulation for creating positive air flow throughout the working chamber

Capacity: 12cft Volume : 350Ltr Inner chamber: 616X565X1005 No. of shelves – 3 Recommended stabilizer – 2KVA

68. Vital Sign Monitor (Dept. Of Anesthesia) a. Monitoring Parameters

ECG, Respiration, NIBP, SaO2 and Temperature i. Digital and 06 waves/ traces display, on minimum 09 inches TFT/LCD Display

screen. ii. Monitor should have audible and visual alarms capability

1. Alarms should have three distinct audible alarm tones to distinguish alarm levels

2. Also monitor should permit automatic viewing of alarming parameter wave form and numeric from any bedside in alarm, as and when connected in a network

iii. Should include hemodynamic s calculations, vital sign and graphic trends iv. Trends should be automatically stored for at least 24 hours in at least one

minute intervals v. Numeric monitored data shall be viewable and recordable in a patient chart –

type format in at periodic intervals vi. Portable, light weight, able to fix with bed/trolley

vii. Battery backup for minimum 01 hour viii. Capability of storage of patient data and printing of patient reports

ix. Capability to integrate with the HIS and transfer the data through LAN/Wireless LAN to any other monitoring room / doctor’s desk.

x. Manufacturer/supplier should have ISO certification for Quality standards xi. Shall meet general requirements of safety for electromagnetic compatibility

xii. Should be FDA, CE, UL or BIS approved product. Manufacturer/supplier should have ISO certification for Quality standards

xiii. Should have local service facility xiv. Shall be supplied for minimum 01 hour backup battery for the entire system. xv. Comprehensive warranty for 05 years and provision of CMC of next 05 years

xvi. User manual in English xvii. Service manual in English

xviii. List of important spare parts and accessories with their part numbers and cost b. Accessories, spares and consumables

For each bedside monitor to provide with i. Patient cable – Qty 1.

ii. Adult cuff – Qty 1. iii. Pediatric cuff – Qty 1. iv. Adult probe SPO2 – Qty 2. v. Pediatric probe SPO2 – Qty 2.

vi. Skin temperature probe – Qty 1.

69. Proseal LMA Size 1,2,3,4 (Dept. Of Anesthesia) i. Should be non disposable

ii. Should supply for i. Size1,2, 3 & 4 (proseal)

iii. Should be from reputed manufacturer iv. Should have supplied to leading hospital v.

70. Classic LMA Size 1,2,3,4(Dept. Of Anesthesia) i. Should be non disposable

ii. Should supply for i. Size1,2, 3 & 4 (Classic)

iii. Should be from reputed manufacturer iv. Should have supplied to leading hospital

71. Intubating LMA, size 3,4(Dept. Of Anesthesia) i. Should be non disposable

ii. Should supply for i. Size 3 & 4 (intubating)

iii. Should be from reputed manufacturer

iv. Should have supplied to leading hospital

72. Ambu bags (Dept. Of Anesthesia) a. Silicone based material to be supplied b. Should be supplied for adult and pediatric purposes c. Should be supplied long with O2 tubing & reservoir bag, and face mask

(Transparent) d. Should be durable and pliable e. Should be of accepted international standards

73. Ambu bags (Dept. Of Anesthesia)

a. Silicone based material to be supplied b. Should be supplied for adult and pediatric purposes c. Should be supplied long with O2 tubing & reservoir bag, and face mask

(Transparent) d. Should be durable and pliable e. Should be of accepted international standards

74. ETO (Dept. Of Anesthesia)

1. Should be manufactured and serviced by reputed company 2. Should be semi – automatic/automatic 3. Should have capacity of about 4.5CF 4. Should supply compressor 5. Should supply ETO cartridges 6. Should have supplied to leading hospitals 7. Should ensure maximum operator safety.

75. Peripheral nerve Stimulator (Dept. Of Anesthesia) 1. Should have a current range from 0.1 to 5mA 2. Should have a resolution of 0.01mA 3. Should have a digital display for current 4. Should have short stimulus pulse duration of 0.1ms. 5. Should have a frequency range from 0.1 to 99HZ 6. Should be able to monitor single twitch, train of four, PTC and DBS 7. Should have integrated electrode cable with lead 8. Provision of nerve stimulator, mapper, locator with jack (modes built in same

machine), different cable system both for stimulator and locator 9. Microprocessor controlled, constant current, portable. 10. Should be battery operated 11. LCD Display, spill proof key pad 12. Model Should have high voltage(Range0.5 to 60mA) for stimulator and low voltage

(0.5 to 5.0Ma) for locator 13. Audio visual alarm for stimulation, low battery, disconnection

14. Should be supplied with 05 sets of insulated needles in varied length 15. Should have safety certificate from a competent authority CE/FDA (US)/STQC CB

certificate/STQC S certificate or valid detailed electrical and functional safety test report from ERTL. Copy of the certificate/test report shall be produced along with technical bid.

16. Accessories 1. Interface cable for locator and stimulator 2. Trans cutaneous mapping probe with cable 3. Main adopter 4. Rechargeable batteries 2pcs

Warranty: 02 year CMC and AMC: for a period of 05 years must be defining in the bid.

76. Specifications for wet field bipolar cautery (Dept. Of Ophthalmology) � Bipolar cautery should be wet field compatible � Stainless steel/titanium forceps - 2 nos � Autoclave compatible cautery cords - 2 nos � Progressively increasing cautery voltage � Power supply: compatible with local power supply.

77. Specifications for Small Pupil Indirect Ophthalmoscope (Dept. Of Ophthalmology)

a. Binocular Indirect Ophthalmoscope completely eliminated filament image, wide visual field with simple papillary distance adjustable

b. Papillary distance: 47mm = 75mm c. Output voltage: 3,4,5,6V d. Accessories

i. Transformer, IR and UV filter ii. Cobalt. blue filter, teaching mirror

iii. Sclera depressor, spare bulb halogen iv. Detachment chart (50 sheets) v. Carrying case

vi. Rechargeable Battery pack vii. 14D Aspheric Lens

viii. 20D Aspheric Lens.

78. Automated Visual field analyzer (Dept. Of Ophthalmology) I. Maximum intensity of stimuli ASB 1000 to 10000

II. Stimulus duration 200 msec III. Stimulus wavelength Broadband visible light IV. Visual field testing Distance 30cm V. Bowl/Background illumination 31.5 ASB

VI. Maximum temporal range 89° degrees (Full Field) VII. central field test patterns 10-2, 24-2, 30-2, Macula 60-4, Nasal Step

VIII. Threshold test Strategies Swedish Interactive threshold Algorithm (SITA) Standard , Fast, Threshold , Fastpac

IX. Screening test C – 40, C – 64, C – 76, C – 80, C – Armaly X. Peripheral field test patterns P – 60, FF – 81, FF – 120, FF – 246

XI. Screening test modes Two Zone, Three zone, quantity defects, Peripheral, Age corrected, Threshold related, single intensity.

XII. Stimulus White on white, red or blue on white, Goldmann stimulus size I to 5.

XIII. Fixation Monitoring blind spot Monitor, video eye monitor, gaze tracking,

XIV. Operator Interface Touch screen CRT with Key board XV. Printer Laser printer

XVI. Patient data out put Name, date of birth, ID, trial Lens Rx, visual acuity

XVII. Analysis software Statistical package for single field analysis, which can be tested on fast an program. Optional net working capability. Glaucoma progression analysis capability should be included. Clinically validated Age related normative Database should be available.

XVIII. Data storage Should be able to store in a computer, 40Gb Hard Drive, 3.5” Floppy drive

XIX. Electrical requirements Compatible with local power supply XX. Safety standard approvals UI, CSA, IEC, CE.

XXI. Standard accessories Wheel chair accessible motorized instrument table, Laser jet printer , key board, dust cover, power cable & UPS

79. Bubble C Pap (Dept. Of Pediatrics) 1. Servo controlled humidifier to provide optimal humidity with temperature display

with alarms for high/low temperature, humidity and disconnections 2. Humidifier should have option for selecting invasive and non invasive modes 3. Should have heater wire temperature cum flow probe with option for measuring

temperature at chamber and patient end 4. C – Pap generator with adjustable C – Pap from 2-20cms H2O with generation of

bubbles 5. Safety provision for maximum pressure limiting in case of occlusions 6. Provision to deliver gas with selectable FiO2 (21-100%) 7. Facility for pressure monitoring and FiO2 monitoring 8. Spiral heater wire for patient circuit 9. Interface should include

a. Nasal tubing b. Nasal prongs of high quality silicon in various sizes based on nares diameter

and width of spectrum c. Infant bonnets/caps of different sizes to secure nasal tubing and prongs

10. Should have large LCD display 11. Alarms for

a. High or low FiO2 b. High or low pressure c. Apnea d. Power fail e. High or low temperature of gas

12. Should be supplied with castor wheels, monitoring brackets, IV hook etc. 13. Compliance with international safety regulations/certifications – FDA and CE

approved.

80. Slide Cabinet –for dept. of Pathology & Central research Laboratory} a. Made up of CRC sheet well designed for its performance and durability b. Closed pack manner for keeping 75X25mm slides in horizontal positions. c. Powder coated paint – outer finish, smooth working doors fitted with handles, lock

and key. d. The anodized seamless molded (dye pressed) aluminium slide trays for holding

75X25mm slides to be arranged so as not to disturb other compartment while pulling out/pulling in trays/slides.

e. Size of the tray = 335X230X35mm with properly fitted and uniformly slotted aluminium carriers in 4 rows, each row holding 50 slides (for Eq: each tray to hold approximately 200 slides)

f. To be fitted with index holders g. Slide holding slotted rows to be numbered 1-50 to identify the slides h. Capacity = 20000 slides

81. Block Cabinet –dept. of Pathology & Central research Laboratory} a. To be made up of CRP sheets, duly powder coated b. For keeping blocks with embedding rings or disposable cassettes c. To keep blocks one after other for quick insertion and removal, for individual rings

not showing on top. d. Each tray to accommodate blocks in rows, sliding smoothly while placing and taking

out. e. Draws to be made of mild steel duly powder coated, index card holders and hands to

be provided on each drawer in front panel f. Cabinets to be provided with doors for dust free storage with lock and key, handle.

Aloaha PDF Suite Freeware Edition: http://www.aloaha.com