configuration of static or dynamic ip address status leds

4
Industrivej 28, Stilling · 8660 Skanderborg · Denmark · Tel: +45 89 93 10 00 · Fax: +45 89 93 10 01 · [email protected] · www.kamstrup.com IP201 The IP201 module is installed directly in the module area of Kamstrup's RF Concentrators, MULTICAL® 602 or MULTICAL® 801. This compact solution provides the utility company with the possibility of reading counts and logging values via the internet or a local net. Kamstrup recommends using closed networks, and the IP201 module is therefore capable of oper- ating behind a NAT/firewall. The module can be ordered pre-configured for plug-and- play installations or with default configuration which can be changed as required. It is possible to order a PC tool for configuration of the mo- dule by contacting Kamstrup A/S. TCP/IP module for RF Concentrator and MULTICAL® DATA SHEET Configuration of static or dynamic IP address Status LEDs for ethernet and service indication NAT penetration and white list firewall Serial connection to external units (only RF Concentrator)

Upload: others

Post on 01-Mar-2022

4 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Configuration of static or dynamic IP address Status LEDs

Industrivej 28, Stilling · 8660 Skanderborg · Denmark · Tel: +45 89 93 10 00 · Fax: +45 89 93 10 01 · [email protected] · www.kamstrup.com

IP201

The IP201 module is installed directly in the module area of Kamstrup's RF Concentrators, MULTICAL® 602 or MULTICAL® 801.

This compact solution provides the utility company with the possibility of reading counts and logging values via the internet or a local net. Kamstrup recommends using closed networks, and the IP201 module is therefore capable of oper-ating behind a NAT/firewall.

The module can be ordered pre-configured for plug-and-play installations or with default configuration which can be changed as required.

It is possible to order a PC tool for configuration of the mo-dule by contacting Kamstrup A/S.

TCP/IP module for RF Concentrator and MULTICAL®

D A T A S H E E T

� Configuration of static or dynamic IP address

� Status LEDs for ethernet and service indication

� NAT penetration and white list firewall

� Serial connection to external units (only RF Concentrator)

Page 2: Configuration of static or dynamic IP address Status LEDs

IP201D A T A S H E E T

2 5810542_E1_GB_04.2012

Connection diagram

Service button

Wink Error

Connection to power supply

Action

Ethernet connection

Port B: Serial connection of additional equipment

Page 3: Configuration of static or dynamic IP address Status LEDs

IP201D A T A S H E E T

35810542_E1_GB_04.2012

CommunicationProtocol TCP/IP, UDP

Ethernet 10 Mbit

Electrical dataSupply Is supplied via high-power supply from the unit in which it is

mounted.

Power consumption < 450 mW

Mechanical dataDimension (wxhxd mm) 41x19x41

Temperature, storage -40 - +70°C

Temperature, operation -40 - +60°C

Relative humidity < 95%

Marking/ApprovalsEMC EN61600-6

CE marking

RoHS

MID approved for mounting in MULTICAL® 602 and MULTICAL® 801.

Technical data

Page 4: Configuration of static or dynamic IP address Status LEDs

IP201D A T A S H E E T

4 5810542_E1_GB_04.2012

Ordering

RF Concentrator with TCP/IP module6699 YYYYY (Licence frequencies) 6699 ZZZZZ (Licence-free frequencies)

Module for MULTICAL® 602Is ordered as a separate module for MULTICAL® 602 – top number: 602XXXXX

Module for MULTICAL® 801Is ordered as a separate module for MULTICAL® 801 – top number: 670XXXXX.801