Color Selection Guide

Excellence in Waterproofing, Roofing and Surfacing Technology

All information and statements contained herein are believed to be accurate, but Kemper System America, Inc., its agents and/or affiliates make no warranty with respect thereto, including but

not limited to any results to be obtained or the infringement of any proprietary right. Improper and unauthorized use or application of such information or statements or the material or systems

described herein is at user’s sole discretion and risk, and consequently user acknowledges that Kemper System America, Inc. shall bear no responsibility or liability for same. Nothing herein shall be construed as a license of or recommendation for use which infringes any proprietary right. All sales are subject to Kemper System America, Inc.’s Standard

Terms and Conditions of Sale, including but not limited to its Limited Warranty.

KEMPER SYSTEM AMERICA, Inc.

1 Reuten Drive

Closter, NJ 07624 Tel: (201) 833-8898 Toll Free: (800) 541-5455

www.kempersystem.net

KEMPER SYSTEM CANADA, Inc.

5200 Dixie Road, Suite 13 Mississauga, ON L4W 1E4 Canada Tel: (905) 624-5463

www.kempersystem.ca

NORTH AMERICAN HEADQUARTERS

1200 North America Drive West Seneca, NY 14224 Tel: (716) 558-2971

KEMP-3152 ©Copyright 2013 Kemper System America, Inc.

For over 50 years, Kemper System waterproofing and

surfacing technology has been protecting some of the

world’s most valuable properties and landmarks – from

the top of the new World Trade Center to the U.S. Capitol

dome, from the scorching heat of Puerto Rico to the

ice and freezing temperatures of Alaska.

Today, with offices in 30 countries, we are the world

leader and innovator of the highest quality, cold liquid-

applied, fully-reinforced waterproofing and roofing

membrane systems.

Kemper System products are available in a wide array of

colors to meet any design specification, whether matching

an existing or historically accurate color palette or fulfilling

a vision of tomorrow for today’s architects. For more

information on how Kemper System products can stand

the test of time on your next project, contact us today.

•Pleaserefertotheproductdatasheetsforadditionalproductinformation.

•Coatingsystemsmaybebrushorrollerapplied.

•PleasereviewKemperSystemmembranesurfacingapplicationrequirementspriorto applyingthecoatingsystem.

•Allcolorsaremadetoorder.Pleaseallowuptotwoweekstoprocessanorder.

•Customcolorsareavailableuponrequest;thisrequiresaminimumleadtimeofthreeweeks.

•Theminimumorderforcoloraggregateblendsisten50lb.bags.

Kemperdur® Color Aggregate Blends

Dark Granite

Limestone

Safety Red

Pure White Dark Beige

Stone Grey Patina Green

Cool White

Cool Frost

Dark Sandstone

Night Shade

Safety Orange

Limestone Terra Cotta

Anthracite Grey Patina Grey

Cool Adobe

Cool Mint

Hickory

Red Brick

Safety Yellow

Sandstone Chestnut

Fountain Blue Deep Black

Cool Earth

Cool Steel

Light Granite

Terra Cotta

Safety Green

Light Ivory Light Grey

Sky Blue Metallic Silver*Light Sandstone

Walnut

Safety Blue

Beige Pebble Grey

Hunter Green Metallic Copper*

Reflective Roof Colors (Kemperdur®2KS-FRandBSF-R)

Traffic and Decorative Colors (Kemperdur®DekoFinish)

Safety Colors (Kemperdur®DekoFinish)

Metallic Gold*

Kemperdur Deko Finish Analiphaticpolyurethanetrafficanddecorativecoatingsystem.

Kemperdur Deko 2KS-FR Finish Analiphaticpolyurethanefireratedroofcoatingsystem.

Kemperdur BSF-R Finish Ano-odor,singlecomponent,water-basedacrylic,fireratedroofcoatingsystem.

Kemperdur Color Aggregate Blends AceramaquartzSgradeaggregateforpedestriantrafficuseonbalconyandterraceapplications.

Reflectivity:74.74%Emittance:.84SRI:91

Reflectivity:71.03%Emittance:.88SRI:87

Reflectivity:75.83%Emittance:.89SRI:94

Reflectivity:72.15%Emittance:.91SRI:89

Reflectivity:70.63%Emittance:.90SRI:87

Reflectivity:68.13%Emittance:.89SRI:83

* Decorative Color only

Aggregates are shown larger than actual size.

Please note: This color chart is for reference only and is not to be used for final color matching. Actual colors may be different due to offset printing limitations.