coating resins · for low odor requirement application. unithane ® 655w55 urethane alkyd 1700 -...

PRODUCT GUIDE

Coating Resins

Featuring:SYNOCRYL®, SYNOCURE®, SYNOLAC® and UNITHANE® Bindersfrom Arkema Coating Resins

1

Table of Contents

Architectural Coatings . . . . . . . . . . . . . . . . . . . . . . . . . 2-3Industrial Coatings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8Protective Marine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9

When you evaluate the raw materials for your formulated products, Arkema Coating Resins offers the widest range of technology platforms to choose from to meet your exact requirements. Our goal is to help you identify a product from our line that enables you to formulate a competitive advantage into every product in your line.

The information presented in this Polymer Selection Guide will serve as a starting point in your evaluation process. Additional information is available from your Arkema representative. You can also visit our web site for technical data sheets and starting point formulations for many of the products listed in this guide.

Additional information is also available in North America from our Resins Response Line Expertise Center – call 1-866-837-5532.

You can expect more choices from Arkema Coating Resins.And we deliver.

1

There is no universal technology platform that is right for every application. Our investments in manufacturing, technology development ongoing customer support mean that you can always expect an objective recommendation driven by our goal of delivering the best combination of performance and value to meet your requirements.

SynOlaC® alkyds - a wide range of alkyd binders for decorative and marine finishes.

SynOCURE® - versatile acrylic binders for use in interior and exterior decorative coat-ings, plus general industrial applications.

SynOlaC® Polyesters - polyester binders for can and coil, graphic arts and general industrial applications.

SynOCRyl® - acrylic binders for decorative metal coatings and high performance mainte-nance and marine coatings.

UnIThanE® - urethane modified alkyd binders used for fast dry primers, architectural and general industrial coatings.

Our wide range of choices helps you optimize performance and value in your formulated products.

Product Chemistry Viscosity mPa.s@25˚C

Viscosity Gardner-Holdt

Acid Value (mg KOH/g),

on Solids

Color (max),

Solvent Oil/Fatty Acid Type

Oil Content (%) Non Volatile (%) Description

SYNOLAC® S63UHV70 Long Oil Alkyd 20000 - 48000 @ 60% NV

Z6 - Z7 @ 60% NV 12 Max. 6G White Spirit Soya 63 70 Very high solvent in-take, light color, good color and gloss retention. Uses: economical decorative high gloss enamels/ primers and marine paints.

SYNOLAC® S63EHV70 Long Oil Alkyd 10000 - 16000 @ 60% NV

Z4Z5 - Z5Z6 @ 60% NV 2 - 10 6G White Spirit Soya 63 70 High solvent in-take, light color, high gloss, good brushability and good durability. Uses: economical decorative high gloss enamels/primers and marine paints.

SYNOLAC® S65 Long Oil Alkyd 15000 - 27000 Z6± 5 - 8 6G White Spirit Soya 65 70 Medium-high viscosity. Light color, high gloss, good brushability and good durability. Uses: decorative high gloss enamels/primers and marine paints.

SYNOLAC® S63BM2 Long Oil Alkyd 10000 - 16000 Z5± 5 - 9 6G White Spirit Soya 63 70 Improved yellowing resistance. Light color, high gloss, good brushability and good durability. Uses: light or white color high-gloss enamels/primers and marine paints.

SYNOLAC® S63 Long Oil Alkyd 6600 - 8600 Z3 - Z4 5 - 8 6G White Spirit Soya 63 70 Light color, high gloss, good brushability and good durability. Uses: decorative high-gloss enamels/primers and marine paints.

SYNOLAC® 65W Long Oil Alkyd 3000 - 4000 Z+ - Z1+ 10 Max. 6G White Spirit Soya 65 70 Low viscosity. Light color, high gloss, good brushability and good durability. Uses: higher solids, higher build decorative high gloss enamels/primers and marine paints

SYNOLAC® 65W60 Long Oil Alkyd 2900 - 5000 Z - Z2 8 Max. 6G White Spirit Soya 65 60 Rapid drying, excellent durability, good color and gloss retention. Uses: decorative and marine paints/primers.

SYNOLAC® L64 Long Oil Alkyd 3600 - 5000 Z1 - Z2 5 - 8 6G White Spirit Linseed 64 70 Very fast drying, high gloss, good brushability and levelling.Uses: fast drying primers for woods/metals. Dark colour high gloss enamels. Wood fillers.

SYNOLAC® T62 Long Oil Alkyd 3600 - 5000 Z1 - Z2 5 - 8 6G White Spirit TOFA 62 60 Excellent fast drying long oil based on fatty acids, high gloss, good brushability and good durability. Uses: fast-drying, decorative, high-gloss enamels/primers and marine paints.

SYNOLAC® 6268W Long Oil Alkyd 1700 - 2700 XY - YZ 10 Max. 6G White Spirit Soya 62 65 Flexible long oil with excellent crack resistance, excellent durability on wood and good brushability. Uses: long lasting exterior wood varnishes or pigmented paints.

SYNOLAC® S64WD70 Long Oil Alkyd 6600 - 8600 Z3 - Z4 5 - 8 6G De-aromatized White Spirit

Soya 65 70 Low aromatic content, light color, high gloss, good brushability and good durability. Uses: low-odor and high gloss decorative enamel paints.

SYNOLAC® S53W60 Medium Oil Alkyd

32000 - 50000 Z6Z7 - Z7 5 - 8 5G White Spirit Soya 53 60 Fast drying, good yellowing resistance and durability. Suitable for both spraying and brushing applications. Compatible with chlorinated rubber. Uses: industrial or decorative paints with good color retention. Road marking paints.

SYNOLAC® 51W Medium Oil Alkyd

6000 -11000 Z3Z4 - Z4Z5 12 Max. 6G White Spirit TOFA 51 55 Chain-stopped alkyd with excellent fast drying and toughness, excellent color retention and durability. Suitable for air dry, force dry and low bake systems. Uses: fast drying automotive refinishes or general purpose industrial finishes.

UNITHANE® 458W Urethane Alkyd 1500 - 2700 X - Z 3 Max. 6G White Spirit Soya 66 55 Fast drying, excellent hardness and abrasion resistance. Good gloss and brushability. Uses: all-purpose wood varnishes, particularly for parquet flooring.

UNITHANE® 458WD55 Urethane Alkyd 1700 - 2700 Y - Z 3 Max. 5G De-aromatized White Spirit

Soya 66 55 Fast drying, excellent hardness and abrasion resistance. Low aromatic content. Uses: all-purpose wood varnishes, particularly for low odor requirement application.

UNITHANE® 655W55 Urethane Alkyd 1700 - 2700 XY - YZ 3 Max. 6G White Spirit Soya 61 55 Fast drying even at low temperature. Excellent hardness and abrasion resistance. Good gloss and brushability. Uses: all-purpose wood varnishes, particularly for parquet flooring.

SYNOCRYL® 874 N 40 ThermoplasticAcrylic

1000 -1800 NA 10 Max. 100H Sol 100 NA NA 40 Versatile acrylic resin for decorative and industrial coatings, durable with good hardness and color retention. A modifier for chlorinated rubber paints.

SYNOCRYL® 874 X 40 ThermoplasticAcrylic

520 - 750 NA 10 Max. 100H Xylene NA NA 40 Versatile acrylic resin for decorative and industrial coatings, durable with hood hardness and color retention. A modifier for chlorinated rubber paints.

The product data provided in this document are typical values, intended only as guides, and should not be construed as sales specifications.

architectural Coatings

32




on Solids

Color (max),

Solvent Oil/Fatty Acid Type

Oil Content (%) Non Volatile (%) Description

SYNOLAC® S63UHV70 Long Oil Alkyd 20000 - 48000 @ 60% NV

Z6 - Z7 @ 60% NV 12 Max. 6G White Spirit Soya 63 70 Very high solvent in-take, light color, good color and gloss retention. Uses: economical decorative high gloss enamels/ primers and marine paints.

SYNOLAC® S63EHV70 Long Oil Alkyd 10000 - 16000 @ 60% NV

Z4Z5 - Z5Z6 @ 60% NV 2 - 10 6G White Spirit Soya 63 70 High solvent in-take, light color, high gloss, good brushability and good durability. Uses: economical decorative high gloss enamels/primers and marine paints.

SYNOLAC® S65 Long Oil Alkyd 15000 - 27000 Z6± 5 - 8 6G White Spirit Soya 65 70 Medium-high viscosity. Light color, high gloss, good brushability and good durability. Uses: decorative high gloss enamels/primers and marine paints.

SYNOLAC® S63BM2 Long Oil Alkyd 10000 - 16000 Z5± 5 - 9 6G White Spirit Soya 63 70 Improved yellowing resistance. Light color, high gloss, good brushability and good durability. Uses: light or white color high-gloss enamels/primers and marine paints.

SYNOLAC® S63 Long Oil Alkyd 6600 - 8600 Z3 - Z4 5 - 8 6G White Spirit Soya 63 70 Light color, high gloss, good brushability and good durability. Uses: decorative high-gloss enamels/primers and marine paints.

SYNOLAC® 65W Long Oil Alkyd 3000 - 4000 Z+ - Z1+ 10 Max. 6G White Spirit Soya 65 70 Low viscosity. Light color, high gloss, good brushability and good durability. Uses: higher solids, higher build decorative high gloss enamels/primers and marine paints

SYNOLAC® 65W60 Long Oil Alkyd 2900 - 5000 Z - Z2 8 Max. 6G White Spirit Soya 65 60 Rapid drying, excellent durability, good color and gloss retention. Uses: decorative and marine paints/primers.

SYNOLAC® L64 Long Oil Alkyd 3600 - 5000 Z1 - Z2 5 - 8 6G White Spirit Linseed 64 70 Very fast drying, high gloss, good brushability and levelling.Uses: fast drying primers for woods/metals. Dark colour high gloss enamels. Wood fillers.

SYNOLAC® T62 Long Oil Alkyd 3600 - 5000 Z1 - Z2 5 - 8 6G White Spirit TOFA 62 60 Excellent fast drying long oil based on fatty acids, high gloss, good brushability and good durability. Uses: fast-drying, decorative, high-gloss enamels/primers and marine paints.

SYNOLAC® 6268W Long Oil Alkyd 1700 - 2700 XY - YZ 10 Max. 6G White Spirit Soya 62 65 Flexible long oil with excellent crack resistance, excellent durability on wood and good brushability. Uses: long lasting exterior wood varnishes or pigmented paints.

SYNOLAC® S64WD70 Long Oil Alkyd 6600 - 8600 Z3 - Z4 5 - 8 6G De-aromatized White Spirit

Soya 65 70 Low aromatic content, light color, high gloss, good brushability and good durability. Uses: low-odor and high gloss decorative enamel paints.


32000 - 50000 Z6Z7 - Z7 5 - 8 5G White Spirit Soya 53 60 Fast drying, good yellowing resistance and durability. Suitable for both spraying and brushing applications. Compatible with chlorinated rubber. Uses: industrial or decorative paints with good color retention. Road marking paints.


6000 -11000 Z3Z4 - Z4Z5 12 Max. 6G White Spirit TOFA 51 55 Chain-stopped alkyd with excellent fast drying and toughness, excellent color retention and durability. Suitable for air dry, force dry and low bake systems. Uses: fast drying automotive refinishes or general purpose industrial finishes.

UNITHANE® 458W Urethane Alkyd 1500 - 2700 X - Z 3 Max. 6G White Spirit Soya 66 55 Fast drying, excellent hardness and abrasion resistance. Good gloss and brushability. Uses: all-purpose wood varnishes, particularly for parquet flooring.

UNITHANE® 458WD55 Urethane Alkyd 1700 - 2700 Y - Z 3 Max. 5G De-aromatized White Spirit

Soya 66 55 Fast drying, excellent hardness and abrasion resistance. Low aromatic content. Uses: all-purpose wood varnishes, particularly for low odor requirement application.

UNITHANE® 655W55 Urethane Alkyd 1700 - 2700 XY - YZ 3 Max. 6G White Spirit Soya 61 55 Fast drying even at low temperature. Excellent hardness and abrasion resistance. Good gloss and brushability. Uses: all-purpose wood varnishes, particularly for parquet flooring.

SYNOCRYL® 874 N 40 ThermoplasticAcrylic

1000 -1800 NA 10 Max. 100H Sol 100 NA NA 40 Versatile acrylic resin for decorative and industrial coatings, durable with good hardness and color retention. A modifier for chlorinated rubber paints.

SYNOCRYL® 874 X 40 ThermoplasticAcrylic

520 - 750 NA 10 Max. 100H Xylene NA NA 40 Versatile acrylic resin for decorative and industrial coatings, durable with hood hardness and color retention. A modifier for chlorinated rubber paints.


32

54




on Solids

Color (max),

Solvent % OH on Solids

Oil/Fatty Acid Type

Oil Content (%)

Non Volatile

(%)

Description

SYNOLAC® 7500 Very Long Oil Alkyd

1500 - 2700 X - Z 3 - 10 8G Nil NA Linseed 75 Min. 98 Smooth wiping, good pigment holding, good filling property and very fast drying. Uses: pigmented wood stain. Glaze for interior and exterior. Wood filler.

SYNOLAC® LS85 Very Long Oil Alkyd

300 - 500 K - O 2 - 5 7G Nil NA Linseed/Soya 85 Min. 98 Smooth wiping, good filling property fast drying, suitable for low viscosity appli-cation. Uses: pigmented wood stain. Glaze for interior and exterior. Wood filler.


32000 - 50000 Z6Z7 - Z7 5 - 8 5G White Spirit NA Soya 53 60 Fast drying, good yellowing resistance and durability. Suitable for both spraying and brushing applications. Compatible with chlorinated rubber. Uses: industrial or decorative paints with good color retention. Road marking paints.


6000 - 11000 Z3Z4 - Z4Z5 12 Max. 6G White Spirit NA TOFA 51 55 Chain-stopped alkyd with excellent fast drying and toughness, excellent color retention and durability. Suitable for air dry, force dry and low bake systems. Uses: fast drying automotive refinishes or general purpose industrial finishes.

SYNOLAC® S30X Short Oil Alkyd 9000 - 15000 Z4Z5 - Z5+ 10 Max. 4G Xylene 5.7 Soya 30 55 Chain-stopped alkyd with excellent fast drying, good hardness and durability. Good adhesion to metal. Uses: rapid drying industrial primers or marine coatings.

SYNOLAC® 5404X55 Short Oil Alkyd 1300 - 2500 X - Y+ 12 - 15 6G Xylene 3 Linoleic 30 55 Fast drying and quick hardness evolution. Good outdoor durability. Uses: air-drying paints and general purpose stoving enamels.

SYNOLAC® 32X Short Oil Alkyd 7000 - 13000 Z3+ - Z5 11 Max. 6G Xylene 4.5 TOFA 37 60 Good balance of hardness and flexibility, good gloss retention and water-soak resistance. Uses: stoving drum enamel or industrial finishes.

SYNOLAC® 35X Short Oil Alkyd 6000 - 11000 Z3 - Z4Z5 25 Max. 6G Xylene 4,2 TOFA 36 60 Excellent hardness, good gloss retention and durability. Uses: stoving drum enamel or industrial finishes. Acid curing wood finishes.

SYNOLAC® T36X70 Short Oil Alkyd 62000 - 94000 Z7 - Z8 13 - 18 5G Xylene 2.9 TOFA 36 70 Fast curing, easy sanding, good hardness and durability. Uses: acid curing polyurethane wood finishes. Particularly for acid curing sanding sealer. Can also be used for stoving enamels.

SYNOLAC® S42X(M) Short Oil Alkyd 5000 - 7500 Z2 - Z3+ 23 - 35 5G Xylene 4.5 Soya 42 55 Chain-stopped alkyd with excellent fast drying, good hardness and durability. Uses: air dry and low bake enamel for industrial finishes.

SYNOLAC® S43X(M) Short Oil Alkyd 3300 - 5000 Z+ - Z2 15 - 25 6G Xylene 2.7 Soya 43 60 Good balance of hardness and flexibility, good gloss retention and hardness. Uses: stoving enamel for drum and LPG cylinder.

SYNOLAC® TN46Ba Short Oil Alkyd 6600 - 8600 Z3 - Z4 25 - 28 6G Butyl Acetate 5.2 TOFA/Saturated FA

46 75 Low aromatic, light color, good gloss and hardness. Uses: acid curing and polyurethane wood finishes.

SYNOLAC® T49MP Short Oil Alkyd 12400 - 21000 Z5 - Z6 18 - 30 6G Methoxy Propanol 4.4 TOFA 49 84 Low aromatics, good gloss and hardness. Fast curing, good pot-life and wet heat resistance. Uses: acid curing and nitrocellulose wood finishes.

SYNOLAC® K32X Short Oil Alkyd 15000 - 27000 Z6± 3 - 10 4G Xylene 5.2 Coconut 32 70 Light color, non-yellowing, a very good plasticizer for nitrocellulose system. Uses: acid curing and nitrocellulose wood finishes.

SYNOLAC® N32X Short Oil Alkyd 10000 - 16000 Z5± 4 - 10 1G Xylene 2.9 Saturated FA 32 70 A versatile resin for furniture wood coatings. Excellent light color, good clarity and gloss, good non-yellowing property. Good stability at low temperature. Uses: acid curing, polyurethane and nitrocellulose wood finishes. Particularly suitable for clear and light color topcoats.

SYNOLAC® N32Ba70 Short Oil Alkyd 1500 - 2400 X - Y 4 - 10 1G Butyl Acetate 2.9 Saturated FA 32 70 Low aromatic and high build. Uses: low aromatic acid curing, polyurethane and nitrocellulose wood finishes.

SYNOLAC® N33X Short Oil Alkyd 32000 - 50000 Z6Z7 - Z7 8 - 18 1G Xylene 3 Saturated FA 33 70 Fast curing. Excellent high color, good clarity and gloss, good non-yellowing property.

SYNOLAC® N36X Short Oil Alkyd 6600 - 8600 Z3 - Z4 9 - 11 1G Xylene 4.7 Saturated FA 36 60 Excellent light color and clarity. Good toughness and chemical resistance. Uses: premium quality acid curing, polyurethane and nitrocellulose wood finishes.

SYNOLAC® N368Ba80 Short Oil Alkyd 62000 - 94000 Z7 - Z8 6 - 12 1G Butyl Acetate 4.7 Saturated FA 36 80 High build, low aromatic, good gloss and hardness. Uses: premium quality, high build, light color and low aromatic polyurethane wood finishes.

E2885 Short Oil Alkyd 7600 - 12400 Z3Z4 - Z5 10 Max. 4G Xylene 3.7 Soya 33 70 Semi-drying alkyd. Uses: Fast drying nitrocellulose and acid curing wood finishes.

SYNOLAC® 133A Short Oil Alkyd 10000 - 16000 Z5± 15 Max. 5G Sol 150 4.8 Coconut 33 60 Good gloss, flexibility and adhesion. Good non-yellowing property. Uses: can coatings, particularly clear overprint varnishes.

SYNOLAC® P33X70 Short Oil Alkyd 30000 - 71000 Z6Z7 - Z7Z8 4 - 9 3G Xylene 4.0 Vegetable 33 70 Non-drying short oil alkyd resin. Good plasticizer for nitrocellulose system. Uses: acid curing and nitrocellulose wood finishes. Can be used for stoving drum enamels.


Industrial Coatings

54




on Solids

Color (max),


Oil/Fatty Acid Type

Oil Content (%)

Non Volatile

(%)

Description

SYNOLAC® 7500 Very Long Oil Alkyd

1500 - 2700 X - Z 3 - 10 8G Nil NA Linseed 75 Min. 98 Smooth wiping, good pigment holding, good filling property and very fast drying. Uses: pigmented wood stain. Glaze for interior and exterior. Wood filler.

SYNOLAC® LS85 Very Long Oil Alkyd

300 - 500 K - O 2 - 5 7G Nil NA Linseed/Soya 85 Min. 98 Smooth wiping, good filling property fast drying, suitable for low viscosity appli-cation. Uses: pigmented wood stain. Glaze for interior and exterior. Wood filler.


32000 - 50000 Z6Z7 - Z7 5 - 8 5G White Spirit NA Soya 53 60 Fast drying, good yellowing resistance and durability. Suitable for both spraying and brushing applications. Compatible with chlorinated rubber. Uses: industrial or decorative paints with good color retention. Road marking paints.


6000 - 11000 Z3Z4 - Z4Z5 12 Max. 6G White Spirit NA TOFA 51 55 Chain-stopped alkyd with excellent fast drying and toughness, excellent color retention and durability. Suitable for air dry, force dry and low bake systems. Uses: fast drying automotive refinishes or general purpose industrial finishes.

SYNOLAC® S30X Short Oil Alkyd 9000 - 15000 Z4Z5 - Z5+ 10 Max. 4G Xylene 5.7 Soya 30 55 Chain-stopped alkyd with excellent fast drying, good hardness and durability. Good adhesion to metal. Uses: rapid drying industrial primers or marine coatings.

SYNOLAC® 5404X55 Short Oil Alkyd 1300 - 2500 X - Y+ 12 - 15 6G Xylene 3 Linoleic 30 55 Fast drying and quick hardness evolution. Good outdoor durability. Uses: air-drying paints and general purpose stoving enamels.

SYNOLAC® 32X Short Oil Alkyd 7000 - 13000 Z3+ - Z5 11 Max. 6G Xylene 4.5 TOFA 37 60 Good balance of hardness and flexibility, good gloss retention and water-soak resistance. Uses: stoving drum enamel or industrial finishes.

SYNOLAC® 35X Short Oil Alkyd 6000 - 11000 Z3 - Z4Z5 25 Max. 6G Xylene 4,2 TOFA 36 60 Excellent hardness, good gloss retention and durability. Uses: stoving drum enamel or industrial finishes. Acid curing wood finishes.

SYNOLAC® T36X70 Short Oil Alkyd 62000 - 94000 Z7 - Z8 13 - 18 5G Xylene 2.9 TOFA 36 70 Fast curing, easy sanding, good hardness and durability. Uses: acid curing polyurethane wood finishes. Particularly for acid curing sanding sealer. Can also be used for stoving enamels.

SYNOLAC® S42X(M) Short Oil Alkyd 5000 - 7500 Z2 - Z3+ 23 - 35 5G Xylene 4.5 Soya 42 55 Chain-stopped alkyd with excellent fast drying, good hardness and durability. Uses: air dry and low bake enamel for industrial finishes.

SYNOLAC® S43X(M) Short Oil Alkyd 3300 - 5000 Z+ - Z2 15 - 25 6G Xylene 2.7 Soya 43 60 Good balance of hardness and flexibility, good gloss retention and hardness. Uses: stoving enamel for drum and LPG cylinder.

SYNOLAC® TN46Ba Short Oil Alkyd 6600 - 8600 Z3 - Z4 25 - 28 6G Butyl Acetate 5.2 TOFA/Saturated FA

46 75 Low aromatic, light color, good gloss and hardness. Uses: acid curing and polyurethane wood finishes.

SYNOLAC® T49MP Short Oil Alkyd 12400 - 21000 Z5 - Z6 18 - 30 6G Methoxy Propanol 4.4 TOFA 49 84 Low aromatics, good gloss and hardness. Fast curing, good pot-life and wet heat resistance. Uses: acid curing and nitrocellulose wood finishes.

SYNOLAC® K32X Short Oil Alkyd 15000 - 27000 Z6± 3 - 10 4G Xylene 5.2 Coconut 32 70 Light color, non-yellowing, a very good plasticizer for nitrocellulose system. Uses: acid curing and nitrocellulose wood finishes.

SYNOLAC® N32X Short Oil Alkyd 10000 - 16000 Z5± 4 - 10 1G Xylene 2.9 Saturated FA 32 70 A versatile resin for furniture wood coatings. Excellent light color, good clarity and gloss, good non-yellowing property. Good stability at low temperature. Uses: acid curing, polyurethane and nitrocellulose wood finishes. Particularly suitable for clear and light color topcoats.

SYNOLAC® N32Ba70 Short Oil Alkyd 1500 - 2400 X - Y 4 - 10 1G Butyl Acetate 2.9 Saturated FA 32 70 Low aromatic and high build. Uses: low aromatic acid curing, polyurethane and nitrocellulose wood finishes.

SYNOLAC® N33X Short Oil Alkyd 32000 - 50000 Z6Z7 - Z7 8 - 18 1G Xylene 3 Saturated FA 33 70 Fast curing. Excellent high color, good clarity and gloss, good non-yellowing property.

SYNOLAC® N36X Short Oil Alkyd 6600 - 8600 Z3 - Z4 9 - 11 1G Xylene 4.7 Saturated FA 36 60 Excellent light color and clarity. Good toughness and chemical resistance. Uses: premium quality acid curing, polyurethane and nitrocellulose wood finishes.

SYNOLAC® N368Ba80 Short Oil Alkyd 62000 - 94000 Z7 - Z8 6 - 12 1G Butyl Acetate 4.7 Saturated FA 36 80 High build, low aromatic, good gloss and hardness. Uses: premium quality, high build, light color and low aromatic polyurethane wood finishes.

E2885 Short Oil Alkyd 7600 - 12400 Z3Z4 - Z5 10 Max. 4G Xylene 3.7 Soya 33 70 Semi-drying alkyd. Uses: Fast drying nitrocellulose and acid curing wood finishes.

SYNOLAC® 133A Short Oil Alkyd 10000 - 16000 Z5± 15 Max. 5G Sol 150 4.8 Coconut 33 60 Good gloss, flexibility and adhesion. Good non-yellowing property. Uses: can coatings, particularly clear overprint varnishes.

SYNOLAC® P33X70 Short Oil Alkyd 30000 - 71000 Z6Z7 - Z7Z8 4 - 9 3G Xylene 4.0 Vegetable 33 70 Non-drying short oil alkyd resin. Good plasticizer for nitrocellulose system. Uses: acid curing and nitrocellulose wood finishes. Can be used for stoving drum enamels.


76





on Solids

Color (max),


Oil/Fatty Acid Type

Oil Content (%)

Non Volatile

(%)

Description

SYNOLAC® PT30X Phenolic Modified Alkyd

2900 - 4500 Z - Z1+ 10 - 16 8G Xylene NA TOFA 30 60 Excellent fast through-dry, good adhesion to metal, good hardness, good solvent and chemical resistance. Uses: strongly recommended for rapid drying universal primers.

SYNOLAC® 37A Acrylic Modified Alkyd

1500 - 2200 XY - Y 10 Max. 6G Sol 150 NA DCO 41 55 Good balance of hardness and flexibility. Good gloss and adhesion. Good color retention. Uses: can coatings, particularly pigmented basecoats.

SYNOLAC® 40X60 Styrenated Alkyd

1500 - 3000 XY - Z+ 15 Max. 6G Xylene NA DCO/Soya

36 60 Very fast initial and hard drying. Good resistance to water and mineral oils. Uses: fast drying paints with excellent gloss, hammer finishes.

SYNOLAC® 03X SaturatedPolyester

6600 - 8600 Z3 - Z4 4 - 10 1G Xylene 2.3 NA NA 70 Branched polyester. Good durability and adhesion to metal. Uses: high quality stoving enamels.


5000 - 7500 Z2 - Z3+ 4 - 12 1G Xylene 1.5 NA NA 70 Branched polyester. Very good hardness and good adhesion to metal. Uses: stoving enamels require good hardness.

SYNOLAC® O18HnBg SaturatedPolyester

3300 - 5000 ZZ1 - Z2 3 Max. 3G Sol 150 / Butyl Glycol

0.5 NA NA 55 Linear polyester with excellent flexibility and adhesion. Good hardness and good sterilization property. Uses: good quality, durable can and coil coatings.

SYNOLAC® 800AG SaturatedPolyester

1600 - 3600 X - Z1 10 Max. 4G Sol 150 / Butyl Glycol

1.4 NA NA 60 Cost effective, general purpose polyester. Good gloss, gloss retention and stain resistance. Uses: general purpose can and coil coatings.


9000 - 13000 Z4 - Z5+ 10 Max. 4G Sol 150 / Butyl Glycol

0.8 NA NA 60 High quality polyester with excellent flexibility, good durability, good flow and gloss.

SYNOLAC® 9605S65 SaturatedPolyester

3000 - 3500 Z+ - Z1 10 Max. 2G Sol 100 / Butyl Glycol

1.8 NA NA 65 Cost effective, general purpose polymer. Fast curing at high line speed, good flexibility, good durability, good flow and gloss. Uses: general purpose coil and metal packaging coatings.


1500 - 2500 X+ - Z 3 Max. 3G Sol 150ND / Butyl Glycol

1.1 NA NA 65 Aliphatic-based polyester. Good adhesion to aluminum. Uses: Highly durable coil coatings for extensive exterior exposure under harsh climatic conditions.


3500 - 4000 ZZ1 - Z1+ 3 Max. 3G Sol 150 / Butyl Glycol

0.5 NA NA 55 Cost effective linear polyester with excellent flexibility. Good adhesion to metal. Uses: coil coating, sheet metal decorating and general industrial applications.

SYNOLAC® 680X60 HydroxylPolyester

2100 - 4300 Y - Z2 15 Max. 5G Xylene 3.3 NA NA 60 Very fast drying and good hardness. Uses: crosslink with polyisocyanates under ambient or force dry conditions. For transport finishing systems.

SYNOCURE® 854 BA 80 HydroxylAcrylic

6900 - 9000 NA 10 Max. 2G Butyl Acetate 2.1 NA NA 80 Low NCO requirement. Uses: cost effective VOC compliant protective and marine coatings.

SYNOCURE® 9237 S 70 HydroxylAcrylic

2000 - 3000 NA 10 Max. 2G Sol 100 / Xylene 3.1 NA NA 70 VOC compliant resin for general purpose and protective coatings, good balance of cost and performance.

SYNOCURE® 865 EEP 70 HydroxylAcrylic

4000 - 6000 NA 8 Max. 100H Ethyl - 3-Ethoxy Propionate

3.1 NA NA 70 Exceptional exterior durability. Uses: high quality protective coatings and VR clearcoats for air dry and low-bake systems.

SYNOCURE® 9201 S 75 Hydroxyl Acrylic

3000 - 4500 NA 10 Max. 70H Butyl Acetate / Ethyl - 3-Ethoxy Propionate

4.2 NA NA 75 For VR clearcoat with excellent gloss, DOI and chemical resistance. Can be used for high performance industrial applications.

SYNOCURE® 866 EEP 75 Hydroxyl Acrylic


4.2 NA NA 75 VR, ACE and transport finishes. Force-dry system, excellent chemical resistance and exterior durability.

SYNOCURE® 213 BA 50 Hydroxyl Acrylic

2500 - 4000 NA 12 Max. NA Butyl Acetate 1.3 NA NA 50 IWF open grain finishes, rapid solvent release, used with NC or CAB. Good hardness, chemical and cold-check resistance properties.


2700 - 4000 NA 25 Max. 50H Butyl Acetate 2.0 NA NA 50 IWF, BR and GI. Very fast dry with excellent blocking and chemical resistances.

SYNOCURE® 862 X 60 Hydroxyl Acrylic

5500 - 8000 NA 8 Max. 100H Xylene 1.5 NA NA 60 Fast dry industrial coatings, primers and topcoats. Good balance of cost and performance.

SYNOCURE® 878 N 60 Hydroxyl Acrylic

1900 - 2800 NA 10 Max. 100H Sol 100 2.7 NA NA 60 Commonly used for protective and marine coatings. Good balance of cost and performance.


3500 - 6000 NA 8 Max. 70H Butyl Acetate 2.8 NA NA 60 High quality resin for VR and GI, fast dry, high chemical resistance & excellent exterior durability.


3000 - 5000 NA 6 Max. 70H Xylene / Methoxy Propyl Acetate

2.8 NA NA 57 High quality resin for VR and GI, fast dry, high chemical resistance & excellent exterior durability.


4500 - 6000 NA 10 Max. 1G Butyl Acetate 3.8 NA NA 65 Flexible topcoats and primers for VR, transport and ACE coatings. Good chip resistance.

Industrial Coatings (continued)

76





on Solids

Color (max),


Oil/Fatty Acid Type

Oil Content (%)

Non Volatile

(%)

Description

SYNOLAC® PT30X Phenolic Modified Alkyd

2900 - 4500 Z - Z1+ 10 - 16 8G Xylene NA TOFA 30 60 Excellent fast through-dry, good adhesion to metal, good hardness, good solvent and chemical resistance. Uses: strongly recommended for rapid drying universal primers.

SYNOLAC® 37A Acrylic Modified Alkyd

1500 - 2200 XY - Y 10 Max. 6G Sol 150 NA DCO 41 55 Good balance of hardness and flexibility. Good gloss and adhesion. Good color retention. Uses: can coatings, particularly pigmented basecoats.

SYNOLAC® 40X60 Styrenated Alkyd

1500 - 3000 XY - Z+ 15 Max. 6G Xylene NA DCO/Soya

36 60 Very fast initial and hard drying. Good resistance to water and mineral oils. Uses: fast drying paints with excellent gloss, hammer finishes.


6600 - 8600 Z3 - Z4 4 - 10 1G Xylene 2.3 NA NA 70 Branched polyester. Good durability and adhesion to metal. Uses: high quality stoving enamels.


5000 - 7500 Z2 - Z3+ 4 - 12 1G Xylene 1.5 NA NA 70 Branched polyester. Very good hardness and good adhesion to metal. Uses: stoving enamels require good hardness.

SYNOLAC® O18HnBg SaturatedPolyester

3300 - 5000 ZZ1 - Z2 3 Max. 3G Sol 150 / Butyl Glycol

0.5 NA NA 55 Linear polyester with excellent flexibility and adhesion. Good hardness and good sterilization property. Uses: good quality, durable can and coil coatings.


1600 - 3600 X - Z1 10 Max. 4G Sol 150 / Butyl Glycol

1.4 NA NA 60 Cost effective, general purpose polyester. Good gloss, gloss retention and stain resistance. Uses: general purpose can and coil coatings.


9000 - 13000 Z4 - Z5+ 10 Max. 4G Sol 150 / Butyl Glycol

0.8 NA NA 60 High quality polyester with excellent flexibility, good durability, good flow and gloss.


3000 - 3500 Z+ - Z1 10 Max. 2G Sol 100 / Butyl Glycol

1.8 NA NA 65 Cost effective, general purpose polymer. Fast curing at high line speed, good flexibility, good durability, good flow and gloss. Uses: general purpose coil and metal packaging coatings.


1500 - 2500 X+ - Z 3 Max. 3G Sol 150ND / Butyl Glycol

1.1 NA NA 65 Aliphatic-based polyester. Good adhesion to aluminum. Uses: Highly durable coil coatings for extensive exterior exposure under harsh climatic conditions.


3500 - 4000 ZZ1 - Z1+ 3 Max. 3G Sol 150 / Butyl Glycol

0.5 NA NA 55 Cost effective linear polyester with excellent flexibility. Good adhesion to metal. Uses: coil coating, sheet metal decorating and general industrial applications.

SYNOLAC® 680X60 HydroxylPolyester

2100 - 4300 Y - Z2 15 Max. 5G Xylene 3.3 NA NA 60 Very fast drying and good hardness. Uses: crosslink with polyisocyanates under ambient or force dry conditions. For transport finishing systems.


6900 - 9000 NA 10 Max. 2G Butyl Acetate 2.1 NA NA 80 Low NCO requirement. Uses: cost effective VOC compliant protective and marine coatings.


2000 - 3000 NA 10 Max. 2G Sol 100 / Xylene 3.1 NA NA 70 VOC compliant resin for general purpose and protective coatings, good balance of cost and performance.



3.1 NA NA 70 Exceptional exterior durability. Uses: high quality protective coatings and VR clearcoats for air dry and low-bake systems.


3000 - 4500 NA 10 Max. 70H Butyl Acetate / Ethyl - 3-Ethoxy Propionate

4.2 NA NA 75 For VR clearcoat with excellent gloss, DOI and chemical resistance. Can be used for high performance industrial applications.



4.2 NA NA 75 VR, ACE and transport finishes. Force-dry system, excellent chemical resistance and exterior durability.


2500 - 4000 NA 12 Max. NA Butyl Acetate 1.3 NA NA 50 IWF open grain finishes, rapid solvent release, used with NC or CAB. Good hardness, chemical and cold-check resistance properties.


2700 - 4000 NA 25 Max. 50H Butyl Acetate 2.0 NA NA 50 IWF, BR and GI. Very fast dry with excellent blocking and chemical resistances.

SYNOCURE® 862 X 60 Hydroxyl Acrylic

5500 - 8000 NA 8 Max. 100H Xylene 1.5 NA NA 60 Fast dry industrial coatings, primers and topcoats. Good balance of cost and performance.


1900 - 2800 NA 10 Max. 100H Sol 100 2.7 NA NA 60 Commonly used for protective and marine coatings. Good balance of cost and performance.


3500 - 6000 NA 8 Max. 70H Butyl Acetate 2.8 NA NA 60 High quality resin for VR and GI, fast dry, high chemical resistance & excellent exterior durability.


3000 - 5000 NA 6 Max. 70H Xylene / Methoxy Propyl Acetate

2.8 NA NA 57 High quality resin for VR and GI, fast dry, high chemical resistance & excellent exterior durability.


4500 - 6000 NA 10 Max. 1G Butyl Acetate 3.8 NA NA 65 Flexible topcoats and primers for VR, transport and ACE coatings. Good chip resistance.

98



Viscosity Gardner-

Holdt


on Solids

GH Color (max),


Non Volatile

(%)

Description


1500 - 3000 NA 10 Max. 100H Butyl Acetate / Xylene

4.2 65 Fast drying, high chemical resistance and good durability. For VR, heavy duty and marine coatings, ACE and transport coatings.

SYNOCRYL® 874 N 40 Thermoplastic Acrylic

1000 -1800 NA 10 Max. 100H Sol 100 NA 40 Versatile acrylic resin for decorative and industrial coatings, durable with good hardness and color retention. A modifier for chlorinated rubber paints.

SYNOCRYL® 874 X 40 Thermoplastic Acrylic

520 - 750 NA 10 Max. 100H Xylene NA 40 Versatile acrylic resin for decorative and industrial coatings, durable with hood hardness and color retention. A modifier for chlorinated rubber paints.

SYNOCRYL® 7013 SD 50 Thermoset AcrylamideAcrylic

1300 - 2300 NA 11 Max. 200H Sol 150ND / n-butanol

NA 50 Clear and pigmented basecoats for metal decorating. Good blocking resistance.

SYNOCRYL® 826 S 60 Thermoset HydroxylAcylic

700 - 1100 NA 16 Max. 100H Xylene / n-butanol

NA 60 Automotive OEM clearcoats and solid colors. High quality stoving systems for general metal.

Industrial Coatings (continued)



on Solids

GH Color (max),


Non Volatile

(%)

Description


6900 - 9000 10 Max. 2G Butyl Acetate 2.1 80 Low NCO requirement. Uses: cost effective VOC compliant protective and marine coatings.


2000 - 3000 10 Max. 2G Sol 100 / Xylene 3.1 70 VOC compliant resin for general purpose and protective coatings, good balance of cost and performance.


4000 - 6000 8 Max. 100H Ethyl - 3-Ethoxy Propionate

3.1 70 Exceptional exterior durability. Uses: high quality protective coatings and VR clearcoats for air dry and low-bake systems.


3000 - 4500 10 Max. 70H Butyl Acetate / Ethyl - 3-Ethoxy

Propionate

4.2 75 For VR clearcoat with excellent gloss, DOI and chemical resistance. Can be used for high performance industrial applications.



4.2 75 VR, ACE and transport finishes. Force-dry system, excellent chemical resistance and exterior durability.


1900 - 2800 10 Max. 100H Sol 100 2.7 60 Commonly used for protective and marine coatings. Good balance of cost and performance.


3500 - 6000 8 Max. 70H Butyl Acetate 2.8 60 High quality resin for VR and GI. Fast dry, high chemical resistance and excellent exterior durability.


1500 - 3000 10 Max. 100H Butyl Acetate / Xylene


SYNOCRYL® 886 S 70 Carboxyl Acrylic

3000 - 6000 44 - 52 5G Xylene / Butanol NA 70 VOC compliant. Cured with Bis-phenol A Epoxies. Economical protective and ACE topcoats.


2000 - 3000 14 - 17 2G Sol 100 / Butanol NA 55 Used with SYNOCURE® BA 60 or 899 BA 70 LM for fast air dry protective, transport and ACE finishes, excellent durability and hardness.

SYNOCRYL® 892 BA 70 Multi-functionalAcrylic

3000 - 4000 <10 3G Butyl Acetate NA 70 VOC compliant, used with SYNOCURE® 899 BA 70 LM for PC/Marine and high performance general industrial applications.


3000 - 4500 17 - 23 2G Xylene / Butyl Acetate/ Sol 100

Butanol

NA 55 Flexible resin, used with SYNOCURE® 899 BA 60 or 899 BA 70 LM for air try finishes; as modifying resins for SYNOCURE® 890S 55.

SYNOCRYL® 899 BA 60 Epoxy Acrylic Hardener

450 - 650 NA 200H Butyl Acetate NA 60 Epoxy Equiv. Wt-380. Curing agent for SYNOCURE® 890 S 55, 892 BA 70 and 895 S 55.

SYNOCRYL® 899 BA 70 LM Epoxy Acrylic Hardener

450 - 850 NA 200H Butyl Acetate NA 70 Epoxy Equiv. Wt-415. Curing agent for SYNOCURE® 890 S 55, 892 BA 70 and 895 S 55 for higher solids and lower VOC finishes.

SYNOCURE® 9436 BA 55 Multi-functional Acrylic

1000 - 2000 <10 3G Butyl Acetate NA 55 New generation VOC compliant resin, cured with SYNOCURE® 899 BA 70 LM for PC/Marine and high performance general industrial applications.

Protective Marine

98



Viscosity Gardner-

Holdt


on Solids

GH Color (max),


Non Volatile

(%)

Description


1500 - 3000 NA 10 Max. 100H Butyl Acetate / Xylene


SYNOCRYL® 874 N 40 Thermoplastic Acrylic

1000 -1800 NA 10 Max. 100H Sol 100 NA 40 Versatile acrylic resin for decorative and industrial coatings, durable with good hardness and color retention. A modifier for chlorinated rubber paints.

SYNOCRYL® 874 X 40 Thermoplastic Acrylic

520 - 750 NA 10 Max. 100H Xylene NA 40 Versatile acrylic resin for decorative and industrial coatings, durable with hood hardness and color retention. A modifier for chlorinated rubber paints.

SYNOCRYL® 7013 SD 50 Thermoset AcrylamideAcrylic

1300 - 2300 NA 11 Max. 200H Sol 150ND / n-butanol

NA 50 Clear and pigmented basecoats for metal decorating. Good blocking resistance.

SYNOCRYL® 826 S 60 Thermoset HydroxylAcylic

700 - 1100 NA 16 Max. 100H Xylene / n-butanol

NA 60 Automotive OEM clearcoats and solid colors. High quality stoving systems for general metal.



on Solids

GH Color (max),


Non Volatile

(%)

Description


6900 - 9000 10 Max. 2G Butyl Acetate 2.1 80 Low NCO requirement. Uses: cost effective VOC compliant protective and marine coatings.


2000 - 3000 10 Max. 2G Sol 100 / Xylene 3.1 70 VOC compliant resin for general purpose and protective coatings, good balance of cost and performance.



3.1 70 Exceptional exterior durability. Uses: high quality protective coatings and VR clearcoats for air dry and low-bake systems.


3000 - 4500 10 Max. 70H Butyl Acetate / Ethyl - 3-Ethoxy

Propionate

4.2 75 For VR clearcoat with excellent gloss, DOI and chemical resistance. Can be used for high performance industrial applications.



4.2 75 VR, ACE and transport finishes. Force-dry system, excellent chemical resistance and exterior durability.


1900 - 2800 10 Max. 100H Sol 100 2.7 60 Commonly used for protective and marine coatings. Good balance of cost and performance.


3500 - 6000 8 Max. 70H Butyl Acetate 2.8 60 High quality resin for VR and GI. Fast dry, high chemical resistance and excellent exterior durability.


1500 - 3000 10 Max. 100H Butyl Acetate / Xylene



3000 - 6000 44 - 52 5G Xylene / Butanol NA 70 VOC compliant. Cured with Bis-phenol A Epoxies. Economical protective and ACE topcoats.


2000 - 3000 14 - 17 2G Sol 100 / Butanol NA 55 Used with SYNOCURE® BA 60 or 899 BA 70 LM for fast air dry protective, transport and ACE finishes, excellent durability and hardness.

SYNOCRYL® 892 BA 70 Multi-functionalAcrylic

3000 - 4000 <10 3G Butyl Acetate NA 70 VOC compliant, used with SYNOCURE® 899 BA 70 LM for PC/Marine and high performance general industrial applications.


3000 - 4500 17 - 23 2G Xylene / Butyl Acetate/ Sol 100

Butanol

NA 55 Flexible resin, used with SYNOCURE® 899 BA 60 or 899 BA 70 LM for air try finishes; as modifying resins for SYNOCURE® 890S 55.

SYNOCRYL® 899 BA 60 Epoxy Acrylic Hardener

450 - 650 NA 200H Butyl Acetate NA 60 Epoxy Equiv. Wt-380. Curing agent for SYNOCURE® 890 S 55, 892 BA 70 and 895 S 55.

SYNOCRYL® 899 BA 70 LM Epoxy Acrylic Hardener

450 - 850 NA 200H Butyl Acetate NA 70 Epoxy Equiv. Wt-415. Curing agent for SYNOCURE® 890 S 55, 892 BA 70 and 895 S 55 for higher solids and lower VOC finishes.

SYNOCURE® 9436 BA 55 Multi-functional Acrylic

1000 - 2000 <10 3G Butyl Acetate NA 55 New generation VOC compliant resin, cured with SYNOCURE® 899 BA 70 LM for PC/Marine and high performance general industrial applications.

The information presented in this Selection Guide for Architectural binders will serve as a starting point in your evaluation process. Additional information is available from your Arkema representative. You can also visit our web site www.arkemacoatingresins.com for additional information for many of the products listed in this guide.

Before handling the materials listed in this bulletin, read and understand the product SDS (Safety Data Sheet) for additional information on personal protective equipment and for safety, health and environmental information. For environmental, safety andtoxicological information, contact you local Arkema Coatings representative or visit our web site: www.arkemacoatingresins.com

© 2012 Arkema Inc. All rights reserved. 11/12SYNOCRYL®, SYNOCURE®,

SYNOLAC® and UNITHANE® are registered trademarks of Arkema Inc.

Form No. 309-000698

Arkema Coating Resins 410 Gregson DriveCary, NC 27511+1-919-469-67001-800-777-8227www.arkemacoatingresins.com

Americas1-866-837-5532 (toll free)+1-919-469-6700Europe+33 (0)1 49 00 79 44China+86 21 6147 6888 (324)Asia Pacific (excluding China)+607 253 6633

CUSTOMER SERVICE

coating resins · for low odor requirement application. unithane ® 655w55 urethane alkyd 1700 -...

Documents