cipet prospectos
TRANSCRIPT
CIPET– a premier National Institution under the Department of Chemicals & Petrochemicals, Ministry of Chemicals &
Fertilizers, Govt. of India is fully devoted to Academic, Technology Support, Research & Development activities in the area
of Plastics Engineering and Technology.
CIPET offers the entire gamut of Academic Programmes ranging from Diploma, Post Diploma, Post Graduate & Doctoral
programmes with varying level of entry qualifications. The regular long-term academic programmes of CIPET are basically
designed in line with the needs of the industry with more emphasis on practical training in the field of Plastics Engineering
and Technology. The Under Graduate, Post Graduate & Ph.D. programmes are offered at 4 High Learning centres viz,
Ahmedabad, Bhubaneswar, Chennai and Lucknow.
CIPET renders Technology Support Services in Design, Tooling, Processing, Testing & Quality Assurance for the benefit of
Plastics and allied Industries. The services are well utilized by the plastics industry for their growth and prosperity. The
organizations like Indian Space Research Organisation (ISRO), Hindustan Aeronautics Limited (HAL), Ordnance Factory
Board (OFB), Electronic Corporation of India Limited (ECIL) are few of the major Public Sector and Govt. organizations
recognized CIPET as their prospective vendor for precision tooling and Mould & Product development. The Plastics
Testing Centre is one of the best testing facilities in Asia and the laboratory is accredited by NABL. CIPET is the first Govt.
of India organisation in the country to get NABCB Accreditation as per ISO/IEC 17020 in the field of Plastics as type - A
inspection body for pre –delivery inspection services.
The vision of two Research & Development Wings – Advanced Research School for Technology & Product Simulation
(ARSTPS) at Chennai and Laboratory for Advanced Research in Polymeric Materials (LARPM) at Bhubaneswar have
been conceived with objectives of transforming CIPET as a Global Research Centre on Polymeric Materials as well as a
resource centre for newer concept development & conversion of concept into reality by product development on
commercial scales. Technology transfers, Creation of Intellectual Property (CIP), knowledge base with validated
documentation are the key aspects of functioning of these R&D Wings.
Welcome to CipetWelcome to Cipet
Central Institute of Plastics Engineering & Technology
(CIPET) is a premier National Institution devoted to Academic,
Technology Support & Research (ATR) for the Plastics & Allied
industries, in India. First CIPET campus was established by
Government of India in 1968 at Chennai and subsequently 14
CIPET Campuses have been established by Government of
India in the country. Today 15 CIPET Institutes – Ahmedabad,
Amritsar, Aurangabad, Bhopal, Bhubaneswar, Chennai,
Guwahati, Hyderabad, Hajipur, Haldia, Jaipur, Imphal,
Lucknow, Mysore and Panipat are contributing through ATR
services to the industries in India and abroad. Further, 4
Specialized units viz, ATPDC - Madurai, APPTC - Balasore,
PWMC - Guwahati, PWMC - New Delhi and 2 R&D wings
ARSTPS - Chennai & LARPM - Bhubaneswar are contributing
to the growth of plastics sector in country. All the centres have
state-of-art equipments / Machineries and latest
infrastructural facilit ies in the areas of Design,
CAD/CAM/CAE, Tooling & Mould Manufacturing, Plastics
processing, Testing and Quality Control.
The courses are designed to produce technically trained
manpower for ready absorption in plastics industry. The
infrastructure facilities in terms of machinery and equipment
are continuously upgraded/modernised to match with the
technological development and needs of the industry globally.
To keep the industries abreast with the new technological
developments and update the skill levels of the personnel
working in the industry, short-term programmes, tailor-made
programmes, modular training programmes, technical
seminars are conducted on Design, Tooling, Plastics
Processing, Plastics Testing and Quality Assurance.
CIPET Focus on Academic, Technology Support and Research & Development.
I. Academic
II. Technology Support Services
III. Research & Development
(a) Regular Long term Programmes
Ph.D.Programmes in Polymer Science / Material Science / Plastics Engineering at LARPM CIPET – Bhubaneswar
Master of Technology in Plastics Engineering / Technology (M.Tech-PE/PT)
Master of Engineering in CAD/CAM(M.E-CAD/CAM) at ARSTPS – CIPET, Chennai
Master of Technology in Polymer Nano Technology (M.Tech-PNT) at LARPM, CIPET, Bhubaneswar M.Sc. Tech. (Material Science & Engineering)
Bachelor of Engineering / Technology in Plastics Engineering / Technology (B.E./B.Tech-PE/PT)
Bachelor of Engineering / Technology in Manufacturing Engineering / Technology (B.E./B.Tech.-ME/MT)
Post Graduate Diploma in Plastics Processing & Testing (PGD-PPT)
Diploma in Plastics Mould Technology (DPMT) Diploma in Plastics Technology (DPT) Post Diploma in Plastics Mould Design (PD-PMD)
Skill & Technology Upgradation Programmes for Industry Tailor-Made Courses Modular programmes Entrepreneural Development programmes Training for Overseas Nationals
CIPET renders Technology Support Services (TSS) to plastics and allied industries in different fields of Plastics Engineering & Technology.
Testing and standardization for plastics materials and products
Material selection for new applications or substitution of
conventional material.
Machinery and equipment selection
Setting up of tool room/processing industries & testing laboratories
Technical Support to the industry in product design/mould/dies/tools design, product failure analysis with the aid of CAD/CAM/CAE.
Undertaking job works in all the areas of Plastics Engineering & Technology
Two dedicated R&D wings, LARPM & ARSTPS have been dedicated to the country where integrated Research Programmes are undertaken in the Polymeric Materials & Product Design and Development areas.
(b) Short Term Programmes
?
?
?
?
? ?
?
?
???
?????
?
?
??
?
?
1
?
?
?
?
?
?
Development of skilled Human Resources for industries.
Upgradation of technical knowledge through advanced training programmes.
Quality control and standardization of plastics materials and products .
Technical consultancy and advisory services for enhancing techno-commercial competitiveness of the industries.
Design and development of moulds, dies for plastics
Research and Application development in the areas of
plastics
industries.
Plastics Engineering & Technology.
2
CIPET PROGRAMMES
CIPET PROGRAMMES
3
(ii) Diploma in Plastics Mould Technology
Course code : DPMTDuration : 3 years Maximum age : 19 years*
Entry qualification : X Std. with Maths, Science and English.
(i) Diploma in Plastics Technology
Course code : DPTDuration : 3 years
19 years*Maximum age :
Entry qualification : X Std. with Maths, Science and English.
4 ACADEMIC
? Atleast 35% marks at the qualifying examination is required for DPT & DPMT courses as per
AICTE norms.
CIPET PROGRAMMES
4
(iii) Post Diploma in Plastics Mould Design
Course code : PD-PMDDuration : 1½ yearMaximum age : 24 years*
Entry qualification: 3 year Diploma in Mechanical, Plastics Technology, Tool/Production Engineering, Mechatronics, Automobile Engineering, Tool & Die Making, DPMT/DPT (CIPET) or equivalent.
(iv) Post Graduate Diploma in Plastics Processing & Testing
Course code : PGD-PPTDuration : 1 ½ yearMaximum age : 24 years*
Entry qualification : 3 year Degree in Science with Chemistry as one of the subjects
* Age limit is relaxable upto 5 years for applicants from SC/ST category and from North Eastern
Region in the case of Diploma / Post Diploma / Post Graduate Diploma Programmes.
? Atleast 50% marks (45% incase of candidates belonging to reserved category) at the qualifying
examination is required for PD-PMD & PGD-PPT courses as per AICTE norms.
5
UNDER GRADUATE, POST GRADUATE
& Ph.D. PROGRAMMES
AT HIGH LEARNING CENTRES
UNDER GRADUATE, POST GRADUATE
& Ph.D. PROGRAMMES
AT HIGH LEARNING CENTRES
Post Graduate Degree Programmes
(i) M.Tech. in Plastics Engineering / Technology
Course code : M.Tech. (PE/PT)*Duration : 2 yearsMaximum age : 35 years
Entry qualification: B.E./B.Tech./B.Sc., Engg.(4 years) In Mechanical / Chemical / Production / Polymer / Plastics
Engineering / Technology (or) M.Sc. in Polymer Science / Chemistry with polymer specialization.
Affiliation
Chennai - Anna University.Bhubaneswar - Biju Patnaik University of Technology.Lucknow - Gautam Buddh Technical University.Ahmedabad - Gujarat Technological University.
(ii) M.Tech. in Polymer Nano-Technology
Course code : M.Tech. (PNT)*Duration : 2 yearsMaximum age : 35 years
Entry qualification : B.E./B.Tech.(4 years) in Mechanical, Plastics Engineering / Technology / Polymer / Chemical (or)
M.Sc., in Polymer Chemistry / Polymer Science / Physics / Chemistry with valid GATE score.
AffiliationBhubaneswar - Biju Patnaik University of Technology.
* Course offered at Ahmedabad, Bhubaneswar, Chennai and Lucknow.* Selection & eligibility as per affiliating University norms.* For Admission at CIPET Chennai & Ahmedabad, please apply through University as per norms.
* Course offered at LARPM, CIPET- Bhubaneswar. * Selection and eligibility as per affiliating University norms.
6
Ph.D. Programmes
Ph.D. Programmes are offered at ARSTPS and LARPM - the two R&D wings of CIPET. ARSTPS focuses on Innovative Product
Design, Tool Design, E-Manufacturing of Prototypes and Reverse Engineering. LARPM focuses on Composites,
Nanocomposites, Polymer Blends & Alloys, Biopolymers, Fuel Cells and Recycling. Ph.D. degree is conferred from Anna
University - Chennai / Biju Patnaik University of Technology - Rourkela / Utkal University - Bhubaneswar.
UG, PG & Ph.D. PROGRAMMES
CIPET offers Under Graduate, Post Graduate & Ph.D.
Programmes at High Learning Centres at Ahmedabad,
Bhubaneswar, Chennai and Lucknow.
(iii) Master of Engineering in CAD/CAM
Course code : M.E. (CAD/CAM)*Duration : 2 yearsMaximum age : 35 years
Entry qualification : B.E./B.Tech. (4 years) in Mechanical / Automobile / Manufacturing / Production / Industrial /
Mechatronics / Marine / Aeronautical.
AffiliationChennai - Anna University.
(iv) M.Sc. Tech. (Material Science & Engineering)
Course code : M.Sc. Tech.* Duration : 5 yearsMaximum age : 21 years
Entry Qualification : H.Sc/10+2 (Academic stream) with Maths, Physics & Chemistry.
AffiliationBhubaneswar - Utkal University.
* Course offered at ARSTPS, CIPET Chennai.* Selection and eligibility as per University norms. Please apply through affiliating University
* Course offered at CIPET Bhubaneswaar.* Selection and eligibility as per University norms.
.
7
8
Under Graduate Degree Programmes
(i) B.E. / B.Tech. in Plastics Engineering / Technology
Course code : B.E. / B.Tech. (PE / PT)*Duration : 4 yearsMaximum age : 21 years
Entry Qualification : H.Sc/10+2 (Academic stream) with Maths, Physics & Chemistry.
(ii) B.E. / B.Tech. in Manufacturing Engineering / Technology
Course code : B.E. / B.Tech. (ME / MT)*Duration : 4 yearsMaximum age : 21 years
Entry Qualification : H.Sc / 10+2 (Academic stream) with Maths, Physics & Chemistry.
AffiliationChennai - Anna University.Bhubaneswar - Biju Patnaik University of Technology.Lucknow - Gautam Buddh Technical University.Ahmedabad - Gujarat Technological University.
* Courses offered at Ahmedabad, Bhubaneswar, Chennai and Lucknow.* For Admission to Under Graduate programmes (B.E. / B.Tech.), please apply through respective affiliating University.
CIPET plays a significant role in helping the plastics industry by providing vital input “Manpower” to achieve their
objectives with potential optimization. CIPET has forged close relationship with industrial and research establishments.
It is further reinforced through technology upgradation programmes – workshops, seminars and entrepreneurship
programmes to provide an ideal platform for industry institute interface.
CIPET has an established brand equity in “Human Resource Market” and CIPET graduates enjoy good reputation
among plastics and allied industry in the domestic as well as international market.
Placement cell at CIPET Corporate and centres has constantly network with business houses and industry to
update the list of prospective employers and synchronise the training inputs to skill levels of students at required level
in industry.
?
?
9
Some of our Elite recruiters
5 PLACEMENT
Placement Statistics for the last 5 years
CIPET has a vibrant alumni consists of 40,000 members spread across the globe in various positions. CIPET Alumni has created a bond between them and their Alma Mater. The strength of Alumni speaks about the quality of the Institution. They are extending their support to the Institution in all possible ways.
Technical Presentations By Alumni
CIPET Alumni is continuously supporting the CIPET trainees by making technical presentations. Students actively attend these sessions and gain more insight from their seniors.
CIPET Alumni has launched an E- magazine in May '09.
CIPET Alumni has launched a website www.cipetalumni.com
CIPET has highly qualified and experienced faculties and has expertise in specific disciplines such as materials,
processing, testing, design, tooling and CAD / CAM / CAE. The faculties are trained in latest technological developments
on regular basis in India and abroad.
Overseas Training of Faculty
BEYOND THE CLASS ROOM
Apart from academics, CIPET trainees actively take part in extra curricular activities such as sports, cultural programmes etc,.
Fresher’s Day
Cultural Activities
Sports Day
All the centres of CIPET across the country have a good library
with books related to Plastics Technology. The collection
includes some rare books on Plastics. The Total number of
books in the libraries at all the centres is around 35,000.
Journals relevant to the Curriculum of all the courses offered at
CIPET are available at all libraries in order to keep the students
abreast with the latest development in their field of study.
Keeping in pace with the latest advancement in the Information
Technology, Digital library is being established wherein the
students will have access to the electronic books, journals and
institutional repositories. Specialised services like CAS will be
implemented for the benefit of the students.
In order to have close cooperation in research work, CIPET has signed
Memoranda of Understanding (MoUs) with foreign universities, research
institutes and industrial organizations.
MoUs with Foreign Institutions
ASTM InternationalMichigan State UniversityPennsylvania State UniversityUniversity of TorontoUniversity of MassachusettsUniversity of New South WalesUniversity of GuelphEuropean Bioplastics and International Biodegradable Products Institute
MoUs with Indian Institutions
Ordnance Factory BoardUtkal University
10 GLOBAL RECOGNIZATION
9 ACCREDITATION
8 LIBRARY
Testing, Quality Control and Inspection Services
Consultancy on Plastics Projects
?
??
?
?
????
Testing of plastics materials and products as per National and International standards (BIS, ISO, ASTM, DIN etc.) through NABL accredited Laboratory for Mechanical, Thermal, Optical, Chemical & Rheological Properties
Testing of Biodegradability as per ASTM, ISO Standards
Micro-biological studies on plastics products through Sterility Lab
Third Party Inspection Services for Plastics & Allied products for quality assurance (ISO 17020)
Technology Audit & Assessment of Plastics based industry
Material development for specific product
Development of Compounds
Turnkey Consultancy on Tool Room / Processing Units / Testing Lab
Plastics Sector Survey on Technical aspects
Design, CAD / CAM / CAE and Tooling
Processing
?
????????
???????
Design & Development of Injection, Blow, Compression, Transfer Mould
Product Development
Mould Flow Analysis
Failure Analysis
Product / Mould Design Validation
Reverse Engineering
Rapid Prototyping
Plastics Product Design
Precision Metal Component Development
Injection Moulding (Micro Processor, All Electric)
Extrusion Stretch Blow Moulding
Single and Multilayer Film Extrusion
Transfer, Compression Moulding
Blending & Compounding
FRP / Composite Products
Recycling of Plastics Waste
11 TECHNOLOGY
HOSTEL FEE
Hostel Room Charges & Electricity charges (Based on CIPET centre location)
Hostel aspirants should have necessary amount to meet their personal monthly expenses.
OTHER FEES
Examination fee per paper/practical …… Rs. 150
Supplementary Examination fee
per paper/practical ................................... Rs. 200
Caution Money Deposit-One time fee ….. Rs. 750
Annual Gymkhana Fee …………...………. Rs. 100
Students Insurance Policy Fee per Year...Rs . 75
Alumni Fees- ……….……... Rs. 130One time fee..
Library Fee (per annum) ……………….....Rs. 500
Admission Fee ……………………………. Rs. 500
FEE STRUCTURE FOR OVERSEAS APPLICANT
FEE STRUCTURE FOR OVERSEAS APPLICANT
COURSE FEE/SEMESTER (US$)
M.Tech….………………………….……… . .2,500PGD-PPT.……………………………………1,560PD-PMD…...…….…………………………..1,560DPMT……...…………………………………1,560DPT…..……………………………………… 1,560
OTHER FEES
Annual Semester Examination Fee,Annual Caution Money Deposit,Annual Gymkhana Fee,Library Fee,Policy Premium and CIPET Alumni Fee …………….....……....US $ 250
Technology innovation through dedicated research work by a Core team has been the philosophy of CIPET, which led to the establishment of
Two R&D centres - Laboratory for Advance Research in Polymeric Materials (LARPM) & Advance Research School for Technology & Product
Simulation (ARSTPS).
ARSTPS
Innovative Product Design for Medical, Automobile,
Aerospace and Packaging Industries
Product and Tool Design Conceptualization (Modeling,
Analysis, Process Optimization & Simulation Approach)
E-Manufacturing of Prototypes
Reverse Engineering for Metal and Conventional Material
Substitution
?
?
??
LARPM
Biopolymers
Polymer Composites & Nanocomposites
Functional Plastics, Carbon Nanotubes
Polymer Membranes, Conducting Polymers
Development & Characterization of Engineering Polymers,
Blends / Alloys
Fuel Cells, e-Waste Recycling
?????
?
14 TO APPLYInformation Brochure and Application form can be obtained from any of CIPET Centres against payment of Rs. 100/- for general candidates
and Rs.25/- for SC/ST candidates in cash or Demand Draft drawn in favour of “CIPET ” A/c No. 10565622390 payable at Chennai
and the form can also be downloaded from our website. Candidates belong to North - Eastern states can get the application forms and apply
on free of cost by producing their residential proof / appropriate support documents.
12 RESEARCH & DEVELOPMENT
COURSE FEE (Per Semester - Six Months)
2
3
S.No. COURSE FEE(Rs)
M.TECH. 22,0001
4
5
12,000PGD-PPT
PD-PMD 12,000
10,000
10,000
DPT
DPMT
13 FEE STRUCTURE
Selection for all courses is as below.
-1. CIPET Programmes based on academic record and performance in the Joint Entrance Examination.2. For PG Programmes selection through respective affiliating University norms / through CIPET JEE-3. For UG Programmes selection through respective affiliating University as per their norms. - (For admission into UG Programmes, please contact the respective University for admission.)
16 SELECTION PROCEDURE
17 AWARD OF STIPENDStipend is awarded to meritorious students of Diploma / Post Diploma / Post Graduate Diploma courses on merit-cum-means basis as per norms.
18 ADMISSION REGULATIONSSelection for admission to M.Tech. / M.Sc. Programmes will be as per the prescribed eligibility norms of the respective affiliating universities.
Only limited seats in M.Tech. / M.Sc.Tech will be filled through JEE as per affiliating University norms at selected centres.For all other Post Graduate Diploma, Post Diploma & Diploma courses selection will be based on academic and the performance in the Joint Entrance Examination, which is to be conducted on 10th July 2011.CIPET reserves a quota for SC/ST, OBC(NCL) candidates and physically challenged (handicapped) candidates as per GOI norms. Tuition Fee waiver scheme is available as per AICTE norms.Age limit shall be as on 31st July 2011. Over-aged candidates will not be considered and hence need not apply.In the case of applicants belonging to SC/ST category & North Eastern Region, age limit is relaxable by five yearsfor all the categories of courses in the case of Diploma / Post Diploma / Post Graduate Diploma Programmes.Limited Stipend is awarded to meritorious students of Diploma / Post Diploma / Post Graduate Diploma courses based on merit-cum-means.
In the case of PGD-PPT course, 2 years degree course (10+2+2) will not be considered and hence need not apply.Candidate appearing for entry qualification examination can also apply. (Necessary documents to be submitted on or before JEE). Their selection and admission is subject to their eligibility for higher studies on successful passing of the entry qualifications.
Limited hostel accommodation is available. Allotment of hostel accommodation is on need basis and availability. However CIPET facilitates all the admitted students in getting accommodation by hiring. No request for change of centre allotted for admission will be entertained during the course of study.The provisional selection will be cancelled for the candidates not accepting the allotment of admission within the stipulated time indicated in the call letter and the wait list will be operated to fill the vacancies.
?
?
??
?
??
?
??
rd Last date for issue of Application form ……………….…………………….......... 3 June 2011th Last date for submission of filled-in-Application form ……………….……..…....10 June 2011th Joint Entrance Examination ………………………………………………..............10 July 2011 th Commencement of Academic Session ……………………………….…..……....16 Aug. 2011
15 IMPORTANT DATES
19 GENERAL INSTRUCTIONS????
??
?
?
?
?
The candidates selected for admission must deposit tuition and other fees on or before the specified date stipulated in ca ll lett e r. All fees from second semester onwards are to be paid within 2 weeks from the date of re-opening. Pattern of collection of fees: 1st Week - No Fine : 2nd Week - Fine of Rs. 25/- leviable Beyond 2nd week- The name will be automatically struck off from the rolls. Re-admission will be made on payment of Rs. 500/-
before the last working day of 3rd week, failing which they will be removed from the rolls. The selected candidates have to sign the code of conduct proforma at the time of admission. The selected candidates have to submit original certificates in support of their entry qualification, date of birth, community certificates
and any other reservation quota certificate (if applicable) for verification at centre during admission. Practical oriented training is conducted on shift basis depending on the exigencies. The students are required to attend the training
programmes in rotational shifts in alive industrial environment. The institute reserves the right to dismiss/terminate any student from the course on grounds of communicable diseases /
unsatisfactory performance / lack of attendance / misconduct / ragging / unlawful activity.
No individual correspondence of any sort will be entertained.
"Ragging is prohibited as per the decision of the Supreme Court of India in writ Petition No. (c) 656 / 1998. Ragging in
any f o r m will invariably lead to Expulsion of the student from the Institute and Hostel. "
20 TRAINING RULES & REGULATIONSELIGIBILITY FOR THE AWARD OF DIPLOMA / POST DIPLOMA / POST GRADUATE DIPLOMA
A trainee is eligible for award of CIPET Diploma/Post Diploma/Post Graduate Diploma only upon successful completion of the course of study (theory/practical/dissertation/industrial training) for a period stipulated against each course from time to time as per the prescribed syllabus/curriculum.
SUBJECT OF STUDY & CURRICULUM OUTLINE
The subjects of study – theory/practicals/dissertation/industrial training will be in accordance with the syllabus/curriculum prescribed from the time to time.
REQUIREMENTS OF EXAMINATIONS & ATTENDANCE
Semester examinations will be conducted at the end of each semester.
A candidate will be permitted to appear for the semester examinations for a subject / practical only if, he/she secures minimum 80% of attendance during the said semester period & his/her conduct has been satisfactory.
The award of Diploma for various courses shall be made by the institute on successful completion of the respective courses. Trainees who have put in less than 80% attendance are not eligible to appear for the semester examinations under any circumstances. Student securing less than 80% of attendance will be detained in the same semester.
No student will be allowed to appear for the examinations unless he/she has attended minimum 80% of the training programmes during the semester.
SEMESTER EXAMINATION / EVALUATION
Semester examination will be conducted at the end of each semester both in theory and practicals/seminar/project/viva voce.
The scheme of evaluation is through internal assessment and semester examination.
The internal assessment/sessional marks for each subject/practical is awarded on the basis of continual evaluation of each trainee by the faculty of concerned for a maximum of 20/40/50/100 marks accordingly.
Semester examinations are conducted for each subject/practical for a maximum of 30/60/100 marks accordingly.
Seminar/Project/Viva Voce examination are conducted for a maximum of 100 marks.
A trainee who fails in any subject is ought to appear for the supplementary examination to clear the arrear/s and is allowed to continue the course of study without any break as such. There is no limit on the number of attempts for the supplementary examination. However, he/she shall have to clear the arrear subject/s within a period of two years from the date of completion of the course. Failing which, he/she will not be eligible to appear for the supplementary examinations thereafter.
PASSING REQUIREMENTS
A trainee is declared to have passed the examination in a subject if he/she secures not less than 40% in theory and 50% in practicals / seminar / project work / viva voce examinations both in internal assessment (for theory subjects and practical only) and semester examination of the total prescribed maximum marks.
In the case of supplementary examinations, 40% in theory and 50% in practicals / seminar / project / viva voce examination are the required passing mark of the total prescribed total marks (internal assessment/sessional marks of the first appearance will be taken into account).
ISSUE OF COURSE COMPLETION CERTIFICATE
Course completion certificate will be issued to the trainees only on successful completion of all semesters (passing all subjects) excepting the final semester. A trainee who has arrear/s in the previous semester/s is not eligible for the course completion certificate.
AWARD OF DIPLOMA
A trainee will be eligible for the award of diploma only upon successful passing of all subjects of all semesters.
Failed candidates will be eligible for the award of diploma only upon successful passing of arrear subject/s of all semesters within two years from the date of completion of the course. Otherwise, they are not eligible for award of diploma.
CLASSIFICATION OF SUCCESSFUL TRAINEES
A successful trainee who secures an aggregate of not less than 80% marks in all the semesters is declared to have passed in First Class with Distinction provided the trainee passes all the subjects of semester examinations in first attempt.
A successful trainee who secures an aggregate of not less than 60% marks in all the semesters is declared to have passed in First Class provided the trainee passes all the subject/s of semester examination in first attempt.
All other successful trainees will be declared to have passed in Second Class.
***
??
?
?
???
???
?
?
?
??
?
?
?
CIPET HEAD OFFICE & CENTRES
Chief Manager (Project),CIPET P.O. Rayon & Silk Mills,Adjacent to GND UniversityAmritsar – 143 104.Tel : +91-183-2256602, 2258938Fax : +91-183-2258671Email : [email protected]
PUNJAB
Manager (Project)CIPET SP-1298, Sitapura Industrial area,Phase – III,Tonk Road, Jaipur - 302 022Tel : +91-141-3239784Fax: +91-141-2770736Email : [email protected]
RAJASTHAN
Deputy DirectorCIPET,City Centre, PO: Debhog, Dist: Purba Medinipur, Haldia – 721657.Tel : +91-3224-255404, 255444Fax : +91-3224-253016Email : [email protected]
WEST BENGAL
Project OfficerCIPETC-12, Industrial Estate, TakyelpetImphal – 795 001Tel : +91-385-2452870, 2449158Fax : +91-385-229958Email : [email protected]
MANIPUR
Deputy DirectorCIPET B-27, Amausi Indl. AreaLucknow – 226 008Tel : +91-522-2437646, 2436910Fax : +91-522-2436227Email : [email protected], [email protected]
UTTAR PRADESH
ORISSA- Unit II
Manager (Project)S-3/79, Sector-A, Zone-B,Mancheswar Indl Estate,Bhubaneswar - 751 010.Ph :0674-2588203 / 2588087Fax :0674-2587874E-mail :[email protected]
ORISSA
Chief Manager (Project)CIPET B-25, CNI Complex, PO-PatiaBhubaneswar – 751 024.Tel : +91-674-2743767, 2743462Fax : +91-674-2743863.E-mail: [email protected]
TAMILNADU
for further details, please contact:
MANAGER (Training)
CIPET Head Office: TVK Industrial Estate, Guindy, Chennai - 600 032. INDIA
Tel: 044 - 22254780, 22254783, 22254784 Extn : 290, 480. Fax: +91- 44 - 22254735
E-mail: [email protected], [email protected], Website: www.cipet.gov.in
Deputy Director CIPETPlot No. 630, Phase-IV, GIDC, Vatva,Ahmedabad – 382 445.Tel : +91-79-25832267, 40083901Fax : +91-79-40083905Email : [email protected],
GUJARAT
Chief Manager (Project)CIPET‘G' Sector, J.K. Road, Govindpura Industrial Area , Bhopal – 462023 (M.P.)Tel : +91-755-4271667, 2687454, 2688288.Fax : +91-755-2689041Email : [email protected]
MADHYA PRADESH
DirectorCIPETP.O: Changsari,District: Kamrup,Guwahati – 781 101Tel : +91-361-2680747, 2680622Fax : +91-361-2680281Email : [email protected], [email protected]
Deputy
ASSAM
CIPET EPIP Complex, Hajipur Industrial Area,Hajipur – 844 101.Tel : +91-6224-277424, 273515Fax : +91-6224-275316Email : [email protected]
Chief Manager (Project)
BIHAR
Chief Manager (Project)CIPETPost Bag No.3, CIDA Phase II, HCL Post Hyderabad -500051Tel : +91-40-27264040,27263750,27264043Fax : + 91-40-27264051Email : [email protected]
ANDHRA PRADESH
Deputy DirectorCIPET437/A, Hebbal Industrial area Mysore –570016Karnataka.Tel : +91-821-2511903, 2510618Fax : +91-821-2510990Email : [email protected]
KARNATAKA
Manager (Project)CIPETGT Road, Sewah Gaon, Panipat-132108, HaryanaTel : +91-180-3297993Fax: +91-180-2565097Email : [email protected]
HARYANA
MAHARASHTRAManager (Project)CIPET Centre, Plot No. J-3/2, MIDC Industrial Area, Chikalthana,Aurangabad - 431 006.Tel : 0240-2480375, 2480164, 2473530.Fax : 0240-2476626.
E-Mail id : [email protected]
Deputy Director
CIPET
Thiru-vi-ka Industrial Estate, Guindy,
Chennai-600032.
Tel : +91-44-22254730, 22254701 – 706
Fax : +91-44-22254707
Email : [email protected]
Chief Manager (TS), Advanced Tooling & Plastic Products Devt. Centre (ATPDC),(a unit of CIPET Chennai),
st ndNo. 35/1, 1 & 2 Floor,Paddy and Flower Market Complex,Mattuthavani, Madurai - 625 007.Phone No. : 0452 - 2586677.Fax No. : 0452 - 2586622.E-Mail : [email protected]