731 Hylton RoadPennsauken, N J 08110856-662-5162www.cinchseal.com

Welcome to CinchSeal & Thank you for your valuable time.

Established in 1995 Manufactures rotary shaft seals Serves food, chemical, and material handling

industries. Located in Pennsauken,NJ

Cinchseals are unique and problem solving sealing devices that are designed to seal powder, slurries, or bulk materials on process equipment. It is an effective powder or slurry rotary shaft seal used to reduce product loss, eliminate housekeeping issues, and prevent bearing and equipment downtime in todays demanding industrial processing plants.

Industries we serve: Agricultural Chemicals Bakery Cosmetic Dairy(Cheese) Food Grain & Milling Industrial Chemicals Meat Packing Mining & Construction Packaging(Baggers) Paint & Pigment

Petroleum & Refining Pharmaceutical Plastic Preserved fruits &

vegetables Rubber(Latex) Snack foods Stone, clay and glass Sugar & confectionary Pulp & Paper Waste water treatment

Rotating Equipment we seal:

Screw Conveyor Drive End Gear Reducers Extruders Mixer & Blenders Rotary Air Valves Ribbon Blenders & Paddle Mixers Bucket Elevators Weight & Measure

Companies we do business with:ADMAnhesuer-BuschCargillHershey FoodsKraftMarsMartin SprocketNestle

CinchSeal Handles Dry PowdersDry flavor concentratesFlour/bakeryGypsum/Lime/ConcreteSaltSpice mixesSugar

CinchSeal Handles Pastes & SlurriesCheese, butter & dairy mixesJams and candy fillings (frosting)Liquid ChocolateMeats and Pet FoodsWaste Water Treatment

Benefits of CinchSeal Cost savings: eliminates material loss, maintenance

costs, prevents bearing failure, shaft damage, and saves money by less power consumption.

Durability: The CinchSeal was designed to (thrive/work) in some of the most rigorous and hostel environments in the food and bulk processing industries which is why the CinchSeal can last for up to 5yrs w/o issue or problems.

Healthier: CinchSeal’s effectiveness to stop leakage makes contaminated processing areas a thing of the past; ensuring the safety of employees and their work environments.

Repairable: Designed to accommodate Repair/Rebuild Kits

Internal MechanismThe molded elastomer “boot” seals at

the shaft statically without damaging or wearing the shaft.

The Silicone boot can withstand temperatures up to 400 degrees F.

Seal ElementsThe Elastomer boot material is an FDA

approved GE silicone that will handle 95% of industrial applications in the field. This lowers inventory and price, and reduces material selection errors.

Parts of the SealThe PTFE Stators and Rotor cups are

made out of special mineral filled Teflon with 15% of a binding agent called Wollastonite, which improves friction stability and heat transfer.

How the 7550 Seal Works… The PTFE rotor cups are mounted on either side

of the silicone boot and turn with the shaft against a series of stator plates which creates the primary seal. The sacrificial surface in the seal is designed to wear and be easily replaced.

Because the cups are mounted to the boot, the rotory assembly floats with the shaft accepting ¼” run out and misalignment that is common to bulk handling equipment.

SpecificationsTemperature Ranges:Aluminum or Stainless Steel seals good

are up to 400FSilicon and PTFE Internal parts good to

400FCan Withstand:Up to 28” of vacuumUp to 65psi operating pressurePurge seal with 5 to 7 PSI of air above

operating vessel pressure for optimum performance

SpecificationsSpeed:Screw Conveyor Seal – up to 60rpmOFCT Mixer Seal – up to 225rpm9100/9700 Split Sanitary Seal – up to

225rpmNotify the factory when application is

above 60rpm for Screw Conveyor Seal or 225rpm for Split Mixer Seals (we have had success up to 400rpms)

Maximum surface speed approximately 1200 feet per minute

SpecificationsMetals:Seal housing is available in Anodized

Aluminum & Stainless Steel depending on customer’s needs.

Hastelloy C 276 and Titanium can be used

when required.

CinchSeal Models7500 Series Rotary Shaft Seals7800 Series Rotary Shaft Seals9100 Series Sanitary Seals9700 Series Split SealsOFCT Series Rotary Shaft SealsCartridge Seals

7500 Series Rotary Shaft SealsDesigned for CEMA screw conveyor and bulk

handling equipmentTemperature ranges: -50F to 400FBolting pattern will accommodate flange

mounted bearingsMaterials available anodized aluminumDesigned to handle linear shaft growth and

axial run outPurge with air, 4 to 5 psig above vessel

pressure, or silicon grease

7800 Series Rotary Shaft SealsDesigned for CEMA screw conveyors and

bulk handling equipment such as bucket elevators.

Housing material is 316ss to handle caustic wash-downs or chemical concerns

Temperature ranges from -50F to 400FWill not damage shafts due to unique

elastomer designPurge with 5 to 7psi over vessel pressure, or silicone grease

9100 Series Sanitary Seal USDA, AMS Accepted for the meat and poultry

industry Seal installation requires no removal of bearings

or drive units due to entirely split design Machined from Stainless Steel to accommodate

caustic washdowns No mechanical adjustments required due to self-

adjusting elastomer design Designed to handle ¼” axial run out and linear

shaft growth Designed to accommodate inexpensive repair

kits Purge with 5 to 7psi over vessel pressure or

silicon grease

9700 Series Rotary Shaft Seals Designed to replace mechanical packing and lip

seals on ribbon blenders, paddle mixers, and other rotating equipment

Eliminates product leakage, housekeeping issues, and bearing and drive failures

Installation of seal requires no equipment removal due to split design

Will not damage or undercut rotating shafts Must be purged with 5 to 7 PSI over vessel

pressure of air, nitrogen, or silicone grease Seals hazardous vapors, dust, and slurries

OFCT Series Rotary Shaft SealsDesigned to replace mechanical packing on

ribbon blenders, mixers and pugmillsTotally Split design to ease installationTemperature ranges – -50F to 400FMaterials: Anodized Aluminum, PTFE, SiliconPurgeable with Air, Nitrogen and Silicon

GreaseWill handle up to 28” vacuum

Cartridge SealDesigned to replace lipseals on Screw Conveyor drive adapter plates such as Dodge and FalkTemperature ranges -50F to 400FReplaces packing on rotary air locks

Crucial info needed for a split or custom seal:

1. Existing bolt pattern (B), size of the bolts, and # of bolts2. Shaft size (A)3. Available space out to the first obstruction (E), bearing, etc.4. Available space around the shaft (c) to mount the seal.

(Bearing shelves)5. Any obstructions on the vessel wall where the seal is

mounting. Do we need to design around a bracket or shell?

Why do we air purge our seals?Creates a higher pressure in the

seal chamber to create a natural air barrier that keeps product out of the seal.

Air purge cools the rotating seal faces by reducing temperature caused by friction.

The pressure inside the seal housing creates a force that pushes the rotating faces outward against the stationary faces creating a tighter seal.

How can this seal benefit your customers?

Reduces product lossReduces plant housekeepingReduces maintenanceImproves equipment operationEliminates shaft damageConsumes less power

How do you get a quotation?

Call Robert for a join callComplete the application form in

your package and email to either Robert or to Mark Pitchko @ the plant

Availability7500 and 7800 series Screw conveyors

seals in stockSplit OFCT seal : 2 to 3 weeksCustom seals in SS or Alum: 4 weeks9100 Sanitary seal: 8 weeks9700 Split Seal: 2 to 3 weeksCartridge seals: 2 to 3 weeks

All orders are to be placed with CinchSeal

Questions?

Thank you for your time…

We look forward to working with you!

CinchSeal731 Hylton Road

Pennsauken, NJ 08110856-662-5162

www.cinchseal.comRepresented in Canada by RGW Sales Canada