choose your freight — now in two easy-to- assemble sizes - fedex · 2020-05-16 · 7. before...

Fold up sides of tray Place back shroud inside of tray and product

Place unerected in-fold tray on skid

lace in-fold tray inverted on top

Place shroud front inside of tray and around product

Stretch wrap horizontally

Band vertically to complete assembly











































Choose Your Freight — Now in Two Easy-to- Assemble SizesFreight shipping can open up new doors for your business — even if you don’t have time to classify each item. Our new freight box makes transporting less-than-truckload shipments simple, with improved flexibility, increased security, and best of all — no freight classification.

The FedEx Freight® box comes in two sizes — a standard size freight box that requires a pallet to ship, and a smaller freight box with an integrated pallet. The freedom to choose your freight box makes freight shipping accessible for any business, no matter thesize. Assembly is easy — just follow the instructions and start shipping.

Standard FedEx Freight Box Assembly Instructions (4 pieces)1. Place un-erected pre-glued in-fold tray on skid. Fold up the sides

of the tray. This will serve as the bottom of your box.

2. Take the three-sided panel and place it inside the bottom tray.Load products or contents into the box.

3. Then take the single-sided panel and place it inside the trayaround the products or contents. This panel should fit inside the three-sided panel.

4. Once all panels are inside the bottom tray, carefully fold up thesides of the other in-fold tray and place it on top of the panels.

5. Your freight box should now look like this.

6. Before shipping, band the entire unit vertically to the skid withfour straps. Optional step: After banding the freight box, wrapfilm around the entire unit horizontally.

1

2

4

6

3

5

More info• Contact your FedEx Freight account executive• Call FedEx Freight Customer Service at 1.866.393.4585 (toll-free)

Smaller FedEx Freight Box with Integrated Pallet Assembly Instructions (2 pieces)1. Cut the bands around the unassembled box. Remove the

unattached out-fold cap part from the skid and set aside.

2. Lift up the attached main body and open by pulling out the three inner flaps.

3. Fold in the straight-edged flaps. Then fold in each notched flap so that the notched flaps sit outside the straight-edged flaps.

4. Set the body down flat onto the skid, making sure the body is square on the skid. Load products or contents into the box.

5. Now grab the out-fold cap and pull up the sides to open.

6. Place the inverted out-fold cap on top of the body. Make sure the edges are placed outside the main body.

7. Before shipping, band the entire unit vertically to the skid with four straps. Optional step: After banding the freight box, wrap film around the entire unit horizontally.

FedEx. Solutions That Matter. ®

lace -fold on topP tretch wrap horizontally


lace -fold on topP tretch wrap horizontallylace -fold on topP tretch

wrap horizontally




1

3

5

2

4

6







7

3/2016 0021762PM

choose your freight — now in two easy-to- assemble sizes - fedex · 2020-05-16 · 7. before...

Documents