cement plant introduction

水泥生产线流程图

Flow chart of cement production line

流程介绍

Process Description

1.Limestone crushing and storage and auxiliary material conveying

The limestone & clay will be sent by the dump truck to the crushing department and

discharged into the feed hopper, then fed into the impact hammer crusher by apron

feeder. The belt conveyor transport the crushed material to the limestone stock pile

The material shall be conveyed to the luffing lateral cantilever stacker to spread

limestone equally in rectangle long store. The pre-homogenized limestone will be

reclaimed by a bridge scraper. Then it will be fed into silo for raw material dosing.

The pure limestone and iron ore which storied in the additive storage house will be

discharged into the hopper by shovel loader. Through the bar gate and vibrating

feeder, they will be sent to respective silo for raw material dosing by belt conveyor.

2. Raw material dosing station

There are 3 silos for limestone & clay, pure limestone and iron ore in this station.

All materials will be proportioned by the constant weigh feeder. The mixture will be

sent to the vertical mill. The metal remover and metal detector located upon the belt

conveyor are used for protecting the vertical mill.

3. The raw material grinding

The materials coming from the dosing station are transmitted by belt conveyor and

air -lock valve, then they will be fed into raw material mill for grinding and separating,

the reject coarse material is returned to the mill for regrinding, elected product enter

the cyclone separator, the final product shall be transmitted by chain conveyor, air

slide and bucket elevator to the homogenized silo of the raw material to deposit. The

exhausted gas coming from the mill enters the cyclone separator, passing through

discharged fan, air conditioning pipe and mixing with the exhausted gas from kiln

inlet. The mixed exhausted gas enters the bag filter to deducting.

The raw material mill utilizes the exhausted gas coming from the kiln end preheater

as the drying heat source, when the rotary kiln is not running, the reserve hot air

generator will be used to generate the hot gas for the mill.

4. The raw material homogenizing silo & Kiln feeding system

A continuous raw material homogenizing silo will be adopted. The raw material

coming from vertical mill and the dust from the exhaust gas treatment system will be

fed into the silo together through bucket elevator, air slide.

Through the discharging system at silo bottom, the homogenized raw meal shall be

fed into the measuring bin equipped with load cell. After weighing by the solid flow

meter, it will be conveyed to the preheater by air slide and bucket elevator.

5. Clinker calcining system and exhaust gas treatment

The clinker calcining system include：A single line 5 stage low pressure loss preheater

and precalciner, rotary kiln and air beam grate cooler with grate area.

The weighed raw meal will be fed into 5-stage preheater with precalciner. In the

preheater and precalciner, it will be decarbonated to the rate of 90%～95% and fed

into the rotary kiln to burn into the clinker under high temperature. The clinker will

enter the grate cooler with breaker. The clinker out of the cooler will be sent to the

clinker silo via the bucket chain conveyor.

The air out of the cooler will be either to the rotary kiln as the secondary air, or to

the precalciner as the tertiary air, or to the bag filter to be dedusted and emitted into

the atmosphere. The collected dust will be sent to the clinker silo.

6. Clinker storage, gypsum crushing & Cement dosing station

Clinker will be stored in a silo. The gypsum will be sent to the jaw crusher by shovel

loader. The crushed gypsum will fed into gypsum dosing silo by the bucket elevator.

The material used for grinding cement will be proportioned by the constant weigh

feeder located at the bottom of all the clinker and gypsum silos. Then it will be fed

into the cement mill by belt conveyor.

7. Cement grinding

A set of closed circuit cement grinding system consists of a cement mill and a O-Sepa

high efficiency separator. After grinding in the cement mill, the material will be fed

into the O-Sepa separator for separating. The reject will be returned to the mill for

regrinding, and the elected product will be sent to the bag filter. The collected finish

product transmitted by air slide will be transported into two cement silos.

8. Cement storage

The cement will be stored in two silos. The aeration system will be installed at the

bottom. Aerated cement will be discharged to the air slide by the discharging system,

then it will be carried to packing department and bulk cement loading department.

9. Cement packing and bulk cement loading

The cement from the cement silo will be fed into the vibrating screen by the bucket

elevator to discharge the impurities. The bag cement packed by the packer will be

sent to the belt conveyor, and load to the truck for dispatching.

A bulk cement bin is used for bulk cement loading. Through the discharging system

and the bulk loader, the cement will be dispatched by the truck.

10. Air compressor station

A compressed air station will be built with 3 screw air compressors. The compressed

air will be dried in the refrigeration dryer. Then it will be conveyed to each use point.

工程案例

Solutions & Projects

XXX TPCC 2500 tpd 项目(工期 2-3 年)

XXX TPCC 2500 tpd Project（Project Duration：2-3 years）

XXX TPPC 水泥厂为 Heidelberg 水泥集团所有，位于坦桑尼亚达累斯萨拉姆海港城市北

部 30 公里处 Wazo Hill。该项目为一条 2500tpd 规模的扩建项目，由 HOLCIM TRANDING 按

HOLCIM 质量标准进行项目管理，TPCC 水泥扩建项目是坦桑尼亚规模最大，现代化程度最高

的水泥生产线。

XXX TPCC cement plant is owned by XXX Cement Group, situated at Wazo Hill, 30km from

the north of Dares Salaam, Tanzania. It is a 2500tpd expansion project.Holcim Tranding under

Holcim Group carried out project management in line with Holcim quality criteria. TPCC is the

largest-scale cement production line with the most advanced technology in Tanzania up to date.

主要设备参数：

Main Equipment Parameters:

序号

No.

车间名称

Section

主机名称

Main Equipments

规格、性能

Specification

数量

Amount

1 石灰石破碎

Limestone crushing

双转子锤破

Double roller

Hammer crusher

生产能力 Capacity:1500t/h 1

2

石灰石预均化堆场

Limestone preblending

stockpile

悬臂式堆料机

Cantilever Stacker

生产能力 Capacity:16

00t/h 1

侧式取料机

Side reclaimer 生产能力 Capacity:1500t/h 1

3

砂岩预均化堆场

Sandstone preblending

stockpile

悬臂式堆料机

Cantilever Stacker 生产能力 Capacity:1500t/h 1

侧式取料机

Side reclaimer 生产能力 Capacity:400t/h 1

4

原料粉磨及废气处理

Raw grinding and waste

gas disposal

立式磨

Vertical mill

生产能力 Capacity:33

0t/h 1

工艺收尘机

Process filter

处理风量 Handling

volume:865000m3/h

(Coal mill off and rew mill off)

1

5 煤粉制备

Pulverized coal preparation

管磨机

Tube mill 生产能力 Capacity:25t/h 1

6 烧成系统

Pyro-process system

回转窑

Rotary kiln 生产能力 Capacity:4000t/d 1

预热器及分解炉

Preheater and

precalciner

采用单系列 5 级预热器加低

NOxDD 分解炉

Single line five stages preheater

and low NOxDD calciner

生产能力 Capacity:4000t/d

1

篦冷机

Grate cooler 生产能力 Capacity:4000t/d 1

窑头收尘器

Ciiler filter

处理风量 Handling air

volume:495000m3/h 1

7 水泥磨系统

Cement mill

水泥磨（立式磨）

Cement mill

（Vertical mill）

生产能力 Capacity:261t/h 1

XXX SOMECEM 水泥厂总承包项目(工期 2-3 年)

XXX Cement Production Line EPC Project （Project Duration：2-3 years）

2002 年，上海同力承揽了有意大利 COLACEM 集团投资的 XXX SOMECEM 水泥厂总承包项

目，这是公司在海外市场承接的第一个完整的日产水泥熟料 2000 吨的 EPC 总承包项目。在

公司走出国门的初期阶段，在尚未建立外交关系的陌生国度，上海同力克服了诸多难以预料

的困难，顺利完成总承包合同任务，为公司全面进军海外市场积累来了经验、坚定了信心、

赢得了信任。

In 2002, Shanghai Tongli contracted XXX Cement Production Line EPC Project invested by

Italian XXX. It is the first complete 2000tpd clinker production line EPC Project of XXX. At the

initial stage of going abroad, XXX has conquered various unexpected difficulties in the strange

country with whom China still had not established official diplomatic relations, and smoothly

finished the EPC contract, which helps to gain more experience, build the confidence and earn

trust for XXX to enter overseas market.



序号

No.

车间名称

Section

主机名称

Main Equipments

规格、性能

Specification

数量

Amount

1 石灰石破碎

Limestone crushing

锤式破碎机

Hammer crusher

生产能力;600t/d

Capacity：600t/d 1

2

石灰石预均化堆场

Limestone

preblending stockpile

悬臂式堆料机

Cantilever Stacker

堆料能力;600t/h

Capacity：600 t/h 1

桥式刮板取料机

Bridge Scrap reclaimer

取料能力;200 t/h


3 粘土破碎

Clay crushing

双齿辊破碎机

Double-roller cursher

生产能力;200 t/h

Capacity：200 t/h 2*11

4

粘土预均化堆场

Clay preblending

stockpile

悬臂式堆料机

Cantilever Stacker

堆料能力;200 t/h


桥式刮板取料机


取料能力;200 t/h


5

原料粉磨及废气处理

Raw grinding and

waste gas disposal

管式磨

Tube mill

生产能力;185 t/h


窑尾收尘器

ESP

处理风量：750000m3/h

Wind volume 1

6

煤粉制备

Pulverized coal

preparation

管磨机

Tube mill

生产能力;20 t/h

Capacity：20 1

7 烧成系统

Pyro-process system

回转窑

Rotary kiln

生产能力;2500 t/d

Capacity：2500 t/d 1


Preheater and

precalciner

单系列五级预热器加管道式分

解炉：生产能力 2500t/d

Single-string five stage preheater

and pipd prcalxiner: Capacity

2500t/d

1

篦式冷却机

Grate cooler

空气梁往复式冷却机生产能

力：2700t/d

Ari beam revolving cooler

Capacity 2700t/d

1

8

水泥磨系统

Cement mill 管磨机

Tube mill

d 生产能力;125 t/h


9 水泥包装系统

Cement packing

回转式包装机

Rotary packing

machine

生产能力;2400 袋/h

Capacity：2400bags/h 2

XXX 3200tpd Project 水泥厂总承包项目(工期 2-年)

XXX 3200tpd Project（Project Duration：2years）

本项目为 XXX 集团投资在中国境内的首个项目，生产能力为 3200tpd。XXX 水泥 3200tpd

项目是我国水泥工业建设史上第一个完全遵循国际惯例采用国际通用行的交钥匙总承包方

式招标项目。工程于 2000 年 6 月 1 日开工，建设周期 19 个个月

It is the first project for XXX Group to invest in China.XXX project line of 3200tpd capacity is

the first project in the Chinese cement industry to fully conform to international practice and

adopt internationally prevailing turnkey EPC tender mode. The project commenced on June 1,

2006, and construction period is 19 months.



序号

No.

车间名称

Section

主机名称

Main Equipments

规格、性能

Specification

数量

Amount

1 石灰石破碎

Limestone crushing

锤式破碎机

Hammer crusher

锤式破碎机:500t/h

Hammer crusher:500

t/h

1

2

页岩破碎

Shale preblending

stockpile

双辊式破碎机

Double-roller cursher

生产能力:200 t/h

Capacity:200 t/h 1

3

页岩预均化堆场

Shale preblending

stockpile

堆料机

Stacker

能力:300 t/h

Capacity:300 t/h 1

刮板取料机

Scrap reclaimer

能力:250 t/h

Capacity:250 t/h 1

4

原煤预均化堆场

Raw coal preblending

stockpile

环锤破碎机

Ring hammer crusher

能力:80~160 t/h

Capacity:80~160 t/h 1

堆料机

Stacker

堆料能力:150 t/h

Stacking capacity:150

t/h

1

取料机

Reclaimer

取料能力:60 t/h

Reclaiming capacity:

60t/h

1

5 原料料粉磨

Raw grinding

立磨

Vertical mill

能力:240 t/h

Capacity:2240 t/h 1

6

煤粉制备

Pulverized coal

preparation

煤磨

Coal mill

能力:25 t/h

Capacity:25 t/h 1

7 烧成系统

Pyro-process system

预热器

Preheater

能力:3200 t/d

Capacity:3200v 1

回转窑

Rotary kiln

能力:3200 t/d

Capacity:3200 t/d 1

篦冷机

Grate cooler

能力:3200 t/d

Capacity:3200 t/d 1

8

水泥磨系统

Cement mill 水泥磨

Cement mill

能力:2x100 t/h

Capacity:2x100 t/h 1

9 水泥包装系统

Cement packing

立式回转喂料机

Vertical rotary feeder

能力 120 t/h

Capacity:120 t/h 1

XXX 5000tpd 水泥厂项目(工期 2-年)

XXX 5000tpd Project（Project Duration：2years）

我公司承建的 XXX 水泥公司 RCC 项目占地面积 115 公顷，该项目建设范围从原料进厂

破碎到水泥包装出厂全部水泥生产线，另外还建有机修车间，办公楼等附属建筑和设施，另

由业主自行建设配套发电厂，建设 6 台 7500KW 燃油发动机组。

XXX project constructed by XXX covers an area of 115 hectares and construction area of 30

hectares. The scope of this project covers the entire cement production line ranging from raw

material entering to cement packing and dispatching as well as supporting buildings and facilities

like mechanical workshop and administrative building and etc. Additionally, the employer also

builds a power plant with 6 7500kw oil-powered generators.



序号

No.

车间名称

Section

主机名称

Main Equipments

规格、性能

Specification

数量

Amo

unt

1

石灰石长形预均

化堆场

Rectanngular

Limestone

preblending

stockpile

悬臂式堆料机

Cantilever Stacker 堆料能力 Stacking capacity :1650 t/h

1 桥式刮板取料机


取料能力 Reclaiming capacity:600 t/h

2

辅料&原煤长形预

均化堆场

Rectanngular

auxiliary raw

pre-homogenizing

stockpile

悬臂式堆料机

Cantilever Stacker 堆料能力 Stacking capacity:500 t/h

1 侧式刮板取料机

Lateral Scrap reclaimer 取料能力 Reclaiming capacity: 300t/h

3

混合材质长形预

均化堆场

Rectanngular

additive

pre-homogenizing

stockpile

悬臂式堆料机

Cantilever Stacker 堆料能力 Stacking capacity:350 t/h

1 侧式刮板取料机

Lateral Scrap reclaimer 取料能力 Reclaiming capacity: 2500t/h

4

原料粉磨及废气

处理

Raw grinding and

waste gas disposal

辊式磨

Roller mill

生产能力 Production capacity:

230t/h(磨损后 after ware) 2

电收尘器

Bag filter 处理风量 Wind volume：1150000m3/h

5

烧成窑尾

Preheater


Preheater and

precalciner

产量 Production capacity: 5000t/d 1

烧成窑

Kiln 回转窑 Rotary kiln 产量 Production capacity: 5000t/d 1

烧成窑头

Cooler

篦式冷却机

Grate cooler 产量 Production capacity:5000t/d 1

熟料输送

Clinker

conveyance

熟料链斗输送机输送量 conveyance volume :450t/h 1

6 水泥粉磨

Cement grinding

辊式磨

Roller mill

生产能力 Production

capacity:150t/h(磨损后 after ware) 2

7 水泥包装

Cement packing

八嘴回转式包装机

8-spout rotary packing

machine

能力 capacity:100t/h（2000 bags/h） 4

My company production of vertical mill for

air swept mill, widely used in cement, slag,

cement, coal and other raw material

grinding, drying and powder selector set in

one, the milling efficiency is high, the drying

capacity(maximum material moisture

content can be high up to 20%). Using the

dynamic powder selecting device, powder

selecting high efficiency, convenient fineness

adjustment.

Vertical Mill

Key Features:

Roller operation is of small resistance,

low energy consumption；

Horizontal mill, discharge on the

center, distribute evenly；

Specific design, Perfect loading

system；

Obvious saving-energy efficiency.

The specification chart of raw material vertial mill

Specification Output(t/h) Fineness

(80um Sieve Residue)

Product

Moisture

Power

(kw)

ZJTL2820 82～115

R≤12% ≤0.5%

1000

ZJTL3030 100～120 1120

ZJTL3230 120～130 1250

ZJTL3440 140～160 1600

ZJTL3640 160～210 1800

ZJTL3840 200～230 2000

ZJTL4040 220～250 2240

ZJTL4240 250～290 2500

ZJTL4540 290～330 3150

ZJTL4840 350～380 3600

ZJTL5040 380～410 4000

ZJTL5240 410～440 4200

ZJTL5440 450～480 4500

ZJTL5640 480～550 4800

ZJTL6040 580～620 5300

The specification chart of vertial coal mill

Specification Output(t/h) Fineness

(80um Sieve Residue) Product Moisture

Power

(kw)

ZJTL1420C 9～10

R≤8% ≤0.5%

150

ZJTL1720C 16～18 250

ZJTL2020C 20～23 355

ZJTL2220C 30～35 500

ZJTL2520C 40～45 710

ZJTL2820C 55～58 900

ZJTL3030C 65～68 1120

ZJTL3230C 75～78 1250

ZJTL3440C 95-～98 1600

ZJTL3640C 110～115 1800

The specification chart of vertial coal mill

Specification Output(t/h) Specific surface

area C㎡/g

Water content for

milling

Power

(kw)

ZJTL3030K 40～45

3300±300 ≤0.5%

1250

ZJTL3630K 60～68 1800

ZJTL4240K 80～85 2240

ZJTL4640K 120 3150

ZJTL5040K 160 4200

ZJTL5640K 200 5300

The specification chart of slag mill

Specification Output(t/h) Specific surface

area C㎡/g

Water content for

milling

Power

(kw)

ZJTL3030S 35

4200～4500 ＜15%

1250

ZJTL3630S 50 1800

ZJTL4240S 65 2240

ZJTL4640S 90 3150

ZJTL5040S 120 4200

ZJTL5640S 150 5000

Office

No. 1885 DuHui Road, MinHang District, ShangHai, China

PH:+86-13761061556 PX:+86-21-33586989

Production Base

Address:NO. 2289 HuanCheng South Road, TongXiang City, ZheJiang, China

www.tlzjchina.com

Ball mill is the key equipment for secondary

grinding after crushing. And it is suitable for

grinding all kinds of ores and other materials, no

matter wet grinding or dry grinding. Besides, it is

mainly applied in many industries, such as

ferrous&non-ferrous metal mine, building

materials, chemical, electric power, coal, traffic,

Ball Mill

Key Features:

High continuous operation efficiency,fewer repair；

Low wind coal mill ratio, stable output and

fineness；

Wide application of grinding coal, with the ability of

grinding hard and high abradability and not affected

by foreign material；

Within wide load range, large flexibility,quick

Specification

Model Inner Dia.

(mm)

Length

(mm)

Rotate Speed

(t/min)

Power

(kw)

Ball Load

(t)

Feed Size

(mm)

Capacity

(t)

Weight

(t)

900*1800 900 1800 37 15 1.8 ≤15 0.5-2 3

900*2100 900 1800/300 37 18.5 1.73 ≤15 0.4-2 4

1200*2000 1200 2000 35 30 2.81 ≤25 1.1-2.5 8

1200*2400 1200 2400 35 37 3.52 ≤25 1.3-3.2 9

1200*2800 1200 2400/400 35 37 4.22 ≤25 1.5-3.7 10

1200*4500 1200 4500 35 45 5.2 ≤25 2.7-6.79 14

1500*3000 1500 3000 29 75 6.8 ≤25 3.3-8.2 14

1500*3500 1500 3000/500 29 75 8.55 ≤25 3.3-8.5 16

1500*4500 1500 4500 29 90 13 ≤25 4.5-12 20

1500*5700 1500 5700 29 110 15 ≤25 2.6-14 25

1830*3000 1830 3000 24 135 13 ≤25 4-15 25

1830*4500 1830 4500 24 155 15 ≤25 4-19 32

1830*7000 1830 7000 26 245 23 ≤25 4-20 36

2100*3000 2100 3000 22 210 19.3 ≤25 6.4-28 41

2100*3600 2100 3000/600 22 210 22.9 ≤25 7.6-28 44

2200*4500 2200 4500 19 280 27 ≤25 5.2-32 75

2400*3600 2400 3600 18 320 32 ≤25 8-60 57

2700*3600 2700 3600 18 400 39 ≤25 12-80 78

3200*4500 3200 4500 17 800 65 ≤25 30-120 128

3600*4500 3600 4500 16.4 1250 88 ≤25 35-200 165

Office


PH:+86 13761061556 PX:+86-21-33586989

www.tlzjchina.com

Main Specification of Raw Maill

Specification

(m)

Shell Speed

(r/min)

Loadage

(t)

Capacity

(t/h)

Main Motor Main

Reducer Weight

(t) Model

Power

(kw) Model

φ2.4×8 20.9 45 21-24 JRQ1512-8 570 ZD80 72

φ3.0×9 18.6 80 26-34 YR1000-8/1180 1000 800 132

φ3.4×9.5* 16.9 75 70 YR1250-8/1430 1250 900 168

φ3.8×7.5 16.7 85 85 YR710-8 1400 800 180

φ4.6×9.5+3.5** 15 185 180-190 YRKK900-8 3550 MFY355 345

Main Specification of Water Slag Mill

Specification

(m)

Shell Speed

(r/min)

Loadage

(t)

Capacity

(t/h)

Main Motor Main

Reducer Weight

(t) Model

Power

(kw) Model

φ2.2×7.5 21.4 33 6-7 JRQ158-8 380 ZD70 53.5

φ2.4×9 20.9 45 8-9 JRQ1512-8 570 ZD80 72.5

φ2.4×13 20.8 65 12-13 YR800-8/1180 800 710 120

φ3.2×13 17.6 125 24-26 YR1600-8/1430 1600 1000 226

Notes:

1. The weights of abrasive, electrical control device and liquid resistance are

not included in the weight shown above;

2. The equipment marked”*” is equipped with drying chamber;

3. The equipment marked”**” is center driven and equipped with drying

chamber. Not included the weight of drive part;

4. The production capacity shown above considers circular-current production

process.

Office


PH:+86 13761061556 PX:+86-21-33586989

www.tlzjchina.com

Main Specification of High-fine Cement Mill

Specification

(m)

Shell Speed

(r/min)

Loadage

(t)

Capacity

(t/h)

Main Motor Main

Reducer Weight

(t) Model

Power

(kw) Model

φ2.4×10 20 53 19-22 YR630-8 630 ZD80 106

φ2.4×12 20.8 63 23-25 YR800-8/1180 800 710 112

φ2.4×13 20.8 65 24-26 YR800-8/1180 800 710 120

φ2.6×13 19.1 80 26-28 YR1000-8/1130 1000 710 158

φ3.0×11 18.8 100 35-40 YR1250-8/1430 1250 800 185

φ3.0×12 18.8 100 35-40 YR1250-8/1430 1250 800 195

φ3.0×13 18.8 108 38-42 YR1400-8/1430 1400 900 210

φ3.2×13 18.4 125 50-55 YR1600-8/1430 1600 JDX1000 223

φ3.2×13* 18.4 125 50-55 YR1600-8/1430 1600 JS120-A 178

φ3.5×11.5* 16.6 135 110 YRKK800-8 2000 MF200-A 179.5

φ3.5×13* 16.6 140 70 YRKK800-8 2000 MF200-A 193

φ3.8×13* 16.6 180 70-75 YR2500-8/1730 2500 JS130-C 222

φ4.0×13* 16 191 80-85 YRKK800-8 2800 MFY280 270

φ4.2×13* 15.6 230 90 YRKK900-8 3550 JB150-B1 254

φ4.6×13* 14.9 270 120 YRKK1000-8 4500 JST160 292

φ4.6×14* 14.9 300 130 YRKK1000-8 4800 JST160 310

Notes:

1. The weights of abrasive, electrical control device and liquid resistance are

not included in the weight shown above;

2. The equipment marked”*” is center driven. Not included the weight of

drive part;

3. The feeding grain size is less than 10mm, discharging grain size is 0.08mm.

Sieve residue of square hole is less than 4% , specific surface areais more

than 340㎡/kg

Office


PH:+86 13761061556 PX:+86-21-33586989

www.tlzjchina.com

Cement rotary kiln mainly use for

calcining cement clinker, TongLi Heavy

Machinery designed cement rotary kiln

include: dry process cement rotary kiln,

half dry process cement rotary kiln and

wet process cement rotary kiln; TongLi

Heavy Machinery adopts domestic

advanced technology to develop a large

and new series of cement rotary kiln.

Rotary Kiln

Key Features:

High quality steel, temperature

resistance and anti-cracking；

Big gear structure strong, stable

operation；

Big Kiln speed ,high capacity；

Good sealing effect, full use of

preheating.

Main TechnicaL Parameters of Rotary Kiln

Specification Prod.Capacity Rotation Speed

of Kiln Body Main Motor Main Reducer Weight

m t/d r/min Model Power

Model t kw

Φ3.2×50 1000 0.36～3.57 ZSN4-280-091B 160 NZS995-40 259

Φ3.3×50 1200 0.36～3.57 ZSN4-280-091B 160 NZS995-40 266

Φ3.5×52 1500 0.35～3.51 ZSN4-315-082 190 NZS995-25 318

Φ3.5×54 1500 0.41～4.06 ZSN4-315-072 250 ZSY560-40 327

Φ4.0×60 2500 0.41～4.07 ZSN4-355-092 315 YNS1110-22.4V 446

Φ4.2×60 3000 0.4～3.98 ZSN4-355-12 375 JH560-SW-28 491

Φ4.3×60 3200 0.4～4.0 ZSN4-355-12 400 YNS1400-31.5 536

Φ4.3×62 3200 0.4～4.0 ZSN4-355-12 420 YNS1400-31.5VIBL 547.5

Φ4.3×64 3500 0.4～4.0 ZSN4-355-12 420 YNS1400-31.5VIL 552

Φ4.3×66 3500 0.4～4.0 ZSN4-355-12 450 YNS1400-31.5VIBL 560

Φ4.8×74 5000 0.35～4.0 ZSN4-400-092 630 JH710c-SW305-40 859

Φ5.0×74 6000 0.35～4.0 ZSN4-450-092 710 JH800c-SW306-28 877

Φ5.6×87 8000 0.35～4.0 ZSN4-450-12 800 JH900c-SW305-25 1201

Φ6.0×95 10000 0.35～4.0 ZSN4-500-092 950×2 JH900c-SW305-28 1580

Φ6.2×96 12000 0.35～4.0 ZSN4-560-092 1100×2 JH900c-SW305-28 1730

Note: The weight shown above include installation kit and exclude front end housing

Office


PH:+86-13761061556 PX:+86-21-33586989

Production Base


www.tlzjchina.com

Office


PH:+86-13761061556 PX:+86-21-33586989

Production Base


www.tlzjchina.com

cement plant introduction

Documents