bt - wood and wood products

49
WOOD and WOOD PRODUCTS Ar. Rino D.A. Fernandez, uap Class Instructor

Upload: fritz

Post on 16-May-2015

10.176 views

Category:

Business


2 download

TRANSCRIPT

Page 1: BT - Wood and Wood products

WOOD and WOOD PRODUCTS

Ar. Rino D.A. Fernandez, uap

Class Instructor

Page 2: BT - Wood and Wood products

WOOD

a natural organic material that has been used for many centuries for the construction of buildings, bridges and a variety of other structures

Page 3: BT - Wood and Wood products

WOOD• Still the most common materials for

small to medium-scale project in other countries

Page 4: BT - Wood and Wood products

WOOD

Page 5: BT - Wood and Wood products

WOOD

Page 6: BT - Wood and Wood products

WOOD• In the Phils, wood was widely used

during the Spanish period and until 1960’s

Page 7: BT - Wood and Wood products

WOOD

Page 8: BT - Wood and Wood products

WOOD• My recent

project,

Page 9: BT - Wood and Wood products

WOOD

Page 10: BT - Wood and Wood products

WOOD

Page 11: BT - Wood and Wood products

WOOD

• Traditional building material• Easy to work with• Durable• Beautiful• Lightweight• Rust and corrosion free• Has varied uses

Page 12: BT - Wood and Wood products

CLASSIFICATION OF TREES

Endogenous

- Trees grows endwards

- Example are bamboo & palm

Page 13: BT - Wood and Wood products

CLASSIFICATION OF TREES

Exogenous

- Trees grows outwards

Page 14: BT - Wood and Wood products

CLASSIFICATION OF EXOGENOUS TREES

(based on broad botanical distinction)

Softwoods

- Generally needle-leaved coniferous trees that bear their seed in cones

- Example are pine & cedar

Page 15: BT - Wood and Wood products

Hardwoods

- Generally broad-leaved deciduous trees

- Example are oak, narra, molave, maple, etc

CLASSIFICATION OF EXOGENOUS TREES

(based on broad botanical distinction)

Page 16: BT - Wood and Wood products

PROPERTIES OF SOFTWOOD:

• Contract with heat & moisture• Have lower density than hardwoods

(good for acoustic & thermal insulation

• Good for interior finishes & for furniture

• Solid but soft• Flexible & strong• Not water resistant• Cost : low

Page 17: BT - Wood and Wood products

PROPERTIES OF HARDWOOD:

• Contract with heat & moisture• Stronger, denser, & homogenous than

hardwoods (good for framing system)• Good for interior finishes & for

furniture• Resist fire better than softwood• Nearly impervious to water (some

varieties)• Cost : high

Page 18: BT - Wood and Wood products

COMPARATIVE ANALYSIS

Page 19: BT - Wood and Wood products

WOOD STRUCTURE

Bark

Bast

Sapwood

Heartwood

Pith

Page 20: BT - Wood and Wood products

WOOD STRUCTURE

Page 21: BT - Wood and Wood products

WOOD STRUCTURE

Page 22: BT - Wood and Wood products

WOOD & TIMBER

WOOD is the hard, fibrous material that makes up the tree under the bark

TIMBER is a wood which retains its natural physical structure and chemical composition and is suitable for various construction works

Page 23: BT - Wood and Wood products

GOOD LUMBERING PRACTICE

Lumbering- term applied to the operations performed in preparing wood for

commercial purposes

Logging

Felling

Storing

Sawing

Drying

Page 24: BT - Wood and Wood products

FELLING

• Timber felled during summer is more readily susceptible to mold. During this period, the quantity of sap is at its greatest & the state of swelling, acidity, etc. are very much unfavorable

• Coniferous trees is ideal to be felled during full moon because the resins were well drawn out of the roots & into the trunk

Page 25: BT - Wood and Wood products

STORAGE

• Timber stored in water after felling reduces the risks of molds & insect damage

Page 26: BT - Wood and Wood products

SPLITTING/SAWING

• Should take place while the

trees is still very damp

Page 27: BT - Wood and Wood products

DRYING

• 70-90% of the original moisture must be removed from the timber before this could be used for construction…..a reason why routine drying is important

Page 28: BT - Wood and Wood products

METHODS OF DRYING TIMBER

• NaturalAir-drying

• Artificial

Forced air drying – used of fans to booster the circulation of air

Kiln-drying – drying in a large airtight structure, heated by steam

pipes

Radio Frequency Dielectric Drying – using radio frequency

dielectric heat

Page 29: BT - Wood and Wood products
Page 30: BT - Wood and Wood products

CHARACTERISTIC OF GOOD TIMBER

Page 31: BT - Wood and Wood products

DEFECTS IN WOOD

Page 32: BT - Wood and Wood products

DEFECTS IN WOOD

• Caused by Abnormal Growth

Heart shake-radial cracks originating at the heart of the trees

Wind/Cup Shake- cracks/breaks across annual rings of timber

Star Shake- series of heart shakes thus forming a star-like manner

Knots- occur at the branch of the wood

Page 33: BT - Wood and Wood products

DEFECTS IN WOOD

• Due to Deterioration

Dry Rot – the presence of moisture caused by fungi in seasoned

wood

Wet Dry – takes place sometimes in the growth of the tree caused by water saturation

Page 34: BT - Wood and Wood products

CAUSES OF DECAY

• Alternate moisture & dryness

• Fungi & molds

• Insects & worms

• Heat & confined air

Page 35: BT - Wood and Wood products

GEOMETRICAL IMPERFECTIONS & DISTORTIONS IN TIMBER

Page 36: BT - Wood and Wood products

METHODS OF PRESERVATION

External – application of preservative coating

Internal – lumber is subjected to pressure & injected with chemical such as zinc chloride solution/salt

Page 37: BT - Wood and Wood products

• Flooring

APPLICATION: Philippine Timber

Narra

Molave

Pine Benguet

Toog (Phil. Oak)

Page 38: BT - Wood and Wood products

• Doors & Windows

APPLICATION: Philippine Timber

Narra

Tanguile

Apitong

Page 39: BT - Wood and Wood products

• Outdoor Deck

APPLICATION: Philippine Timber

Yacal

Molave

Guijo

Page 40: BT - Wood and Wood products

• Ceiling Panel & Joists

APPLICATION: Philippine Timber

Molave

Pine Benguet

Page 41: BT - Wood and Wood products

• Railing & Balustrade

APPLICATION: Philippine Timber

Narra

Molave

Pine Benguet

Page 42: BT - Wood and Wood products

• Exposed Structural Member

APPLICATION: Philippine Timber

Molave

Pine Benguet

Yacal

Lauan

Page 43: BT - Wood and Wood products

• Paneling

APPLICATION: Philippine Timber

Narra

Pine Benguet

Almaciga

Dao

Page 44: BT - Wood and Wood products

• Furniture & Cabinets

APPLICATION: Philippine Timber

Narra

Molave

Pine Benguet

Almaciga

Kamagong

Page 45: BT - Wood and Wood products

APPLICATION: Philippine Timber

Molave

Yacal

Guijo

Pine Benguet

• Structural Members & Framing

Page 46: BT - Wood and Wood products

Examples of PHILIPPINE TIMBER

Narra – most expensive, for floors, doors, furniture, panelings, veneers

First Group

Molave – for posts & girders, trusses, framings, floors, jambs, furniture, & other purpose esp. those exposed to weather

Yacal & Guijo – for posts & girders, jambs, wooden decks & railings exposed to weather

Page 47: BT - Wood and Wood products

Examples of PHILIPPINE TIMBER

Pine Benguet – for flooring, panelings, sidings & furniture. Also for framings, trusses

First Group

Tanguile & Apitong – the most common lumber in the market. Used for framings, joists, trusses, nailers, etc.

Lauan (white & red) – for framings, furnitures

Kamagong – for furnitures

Page 48: BT - Wood and Wood products

Examples of PHILIPPINE TIMBER

Dao – for panelings & veneers

First Group

Almaciga – for panelings & veneers

Mahogany

Ipil

Kalantas

Kalamansanai

Page 49: BT - Wood and Wood products

TAKE-HOME QUIZ:

1. Using an 8”x8” wood post, illustrate the wood post connection to a 12”x12” concrete pedestal.

2. Illustrate the connection of an 8”x8” wood post into a 2-2”x6”x12” wood beam.

3. Illustrate the roof framing layout (using wood rafters) for a 5.00m x 6.00m bungalow with gable roof profile.

Research on the following Wood Connections: