bracelet key chain -special pattern for diy braided bracelet
DESCRIPTION
This bracelet key chain tutorial is going to show you a hands-on way about a special diy braided bracelet pattern.TRANSCRIPT
Once handling the basic ladder braiding skill, you can
finish off this beautiful bracelet key chain within a few
minutes. In this tutorial DIY braided bracelet key chain
just needs a few lengths of colorful nylon thread and
alpha cubic beads; it is a fun to have a try!
Materials and tools:
2mm colorful nylon thread
Acrylic alpha beads
Suede cord
Lobster clasp
Jump rings
Key ring
Round nose plier
Flat nose plier
Scissors
Instructions:
Step 1: make ladder braiding pattern
1st, cut a piece of suede cord measuring twice length of your wrist
plus and nylon thread 4 times of your wrist size;
2nd, make a lark’s head knot over a large jump ring and insert
nylon thread in between;
3rd, weave thread over, down and again at both sides, forming
ladder pattern;
4th, get a few length, and slide alpha F bead on;
This bracelet key chain tutorial is going to show you a hands-on way about a special DIY braided bracelet
pattern.
Step 2: complete the rest bracelet Step 3: finish the bracelet key chain
Use clasp to grasp the large jump ring, so the final
product is like this:
Till now our tutorial of DIY braided bracelet key chain is
done. In this item, the colorful string jewelry can be
worn as a decorative friendship bracelet and
meanwhile is able to function as a useful key chain.
Shop for different diversities of thread and cord for your bracelet making please click:
http://www.pandahall.com/wholesale-Thread-Cord/54.html
1st, repeat above step and get the final “FUN”
pattern;
2nd, knot the suede cord ends firmly, cut off the
excess and singe them;
1st, open a small jump ring and hook cord knot
with lobster clasp;
2nd, Open the large jump ring in step 1, and
slide key ring into;