bombas goulds pump

24
ITT Goulds Pumps 3656/3756 S-Group Cast Iron, Bronze Fitted Centrifugal Pumps Bombas centrífugas en hierro fundido con accesorios de bronce Goulds Pumps is a brand of ITT Corporation. Goulds Pumps es una marca de fábrica de ITT Corporation. www.goulds.com Engineered for life Commercial Water B363756S

Upload: pamelataboadalozano

Post on 19-Dec-2015

309 views

Category:

Documents


7 download

DESCRIPTION

diseño de bombas

TRANSCRIPT

  • ITTGoulds Pumps3656/3756 S-GroupCast Iron, Bronze Fitted Centrifugal PumpsBombas centrfugas en hierro fundido con accesorios de bronce

    Goulds Pumps is a brand of ITT Corporation.

    Goulds Pumps es una marca de fbrica de ITT Corporation.

    www.goulds.com

    Engineered for life

    Commercial Water

    B363756S

  • 2GOULDS PUMPSCommercial Water

    A Full Range of Product Features

    The 3656 and 3756 S-Group pumps from Goulds have been designed with technical benefits to meet the needs of users in a variety of water supply, recircula-tion, and cooling applications.

    The model 3656 offers close coupled design for space saving and simplified maintenance.

    The model 3756 offers a bear-ing frame mounted design for flexibility of installation and drive arrangements.

    Back pull-out to reduce mainte-nance down time.

    Standard Type 21 mechanical seal for both reliability and availability. Carbon/ceramic/BUNA standard, with other faces and elastomers available.

    3656/3756 available in all iron, bronze fitted or all bronze construction for application versatility.

    Replaceable wearing compo-nents include stainless steel shaft sleeve and casing and hub wear rings to maintain peak efficiency.

    Packed box sealing is also avail-able as an option.

    Enclosed impeller design, dy-namic balancing and renewable wear rings reduce losses affect-ing performance and pump life.

    Suction and discharge pipe connections are NPT threaded, except 3 x 4 7 which has

    125 lb. ANSI flat faced flanges.

    Rigid cast iron motor adapter provides support and registered fits maintain positive unit alignment.

    Standard NEMA motor frame, JM or JP shaft extension, C-face mounting, single phase or three phase, 3500 or 1750 RPM. Open drip proof and totally enclosed fan cooled.

    Optional explosion proof or high efficiency motors available.

    Optional rigid carbon steel bedplate, sheet metal coupling guard and T. B. Woods spacer coupling for 3756 models.

    Las bombas 3656 y 3756 del Grupo S de Goulds han sido diseadas con beneficios tcnicos para satisfacer las necesidades de los usuarios en variadas aplicaciones de suministro y recirculacin de agua y aplicaciones de refrigeracin.

    El modelo 3656 cuenta con diseo de acoplamiento corto para ahorrar espacio y simplificar el mantenimiento.

    El modelo 3756 cuenta con diseo de montaje sobre bastidor que ofrece gran flexibilidad en los arreglos de instalacin y accionamiento.

    Desmontaje posterior que reduce el tiempo de inactividad por mantenimiento.

    Sello mecnico estndar Tipo 21, brinda gran confiabilidad y asegura la disponibilidad. Estndar de carbono/cermica/ BUNA, tambin se encuentran disponibles con otras caras y elastmeros.

    Los modelos 3656 y 3756 se fabrican en todo hierro, con accesorios de bronce o en todo bronce, para una mayor versatilidad de aplicacin.

    Los componentes de desgaste reemplazables incluyen los anillos de desgaste de la carcasa y del rodete y la camisa del eje, de acero inoxidable, para mantener la eficiencia pico.

    El diseo de impulsor encerrado, balanceo dinmico y anillos de desgaste reemplazables reducen las prdidas que afectan el desempeo y la vida de la bomba.

    Las conexiones de succin y descarga son roscadas NPT, con excepcin de la bomba de 3 x 4 7, que cuenta con bridas de cara lisa ANSI de 125 lbs.

    El adaptador rgido del motor, de hierro fundido, ofrece soporte y los montajes registrados mantienen el alineamiento positivo de la unidad.

    Motor con bastidor NEMA estndar, extensin de eje JM, montaje en cara C, monofsico o trifsico, 3500 1750 RPM. Abierto a prueba de filtraciones o totalmente encerrado enfriado por ventilador.

    Motores a prueba de explosiones y de alta eficiencia disponibles como opcin.

    Placa de asiento rgida de acero al carbono, protector de acoplamiento de chapa metlica y acoplamiento espaciador T. B. Woods disponibles como opcin en los modelos 3756.

    Una amplia gama de variadas caractersticas

    Goulds Pumps is ISO 9001 Registered.

  • 3GOULDS PUMPSCommercial Water

    Performance Coverage Curvas de desempeo

    60

    0

    120

    180

    240

    METERSMETROS

    0

    20

    40

    60

    80

    m3hrU.S. GPM

    GALLONS PER MINUTE (GALONES POR MINUTO)

    0 10020 6040 80

    8003000 100 600400 700200 500

    120 140 160 180

    TOTAL DY

    NAMIC HEA

    D (CAR

    GA DINM

    ICA TO

    TAL)

    FEETPIES

    11/2 x 2 8

    300

    1 x 2 8

    1 x 2 7 21/2 x 3 7

    3 x 4 7

    11/2 x 2 611/2 x 2 6H

    3500 Coverage Curve, Curva de alcance 3500

    1750 Coverage Curve, Curva de alcance 1750

    0

    40

    60

    80

    METERSMETROS

    0

    10

    30

    20

    m3hrU.S. GPM

    GALLONS PER MINUTE (GALONES POR MINUTO)

    0 5010 3020 40

    4001500 50 300200 350100 250

    60 70 80 90

    450

    100

    20

    FEETPIES

    TOTAL DY

    NAMIC HEA

    D (CAR

    GA DINM

    ICA TO

    TAL)

    11/2 x 2 8

    1 x 2 8

    1 x 2 7

    3 x 4 721/2 x 3 7

    11/2 x 2 6 / 11/2 x 2 6H

  • 4GOULDS PUMPSCommercial Water

    3656/3756 S-Group Numbering System For All Units Built After June 1, 1998Sistema de numeracin del Grupo S, modelos 3656/3756, para todas las unidades fabricadas luego del 1 de junio de 1998

    The various versions of the 3656 and 3756 S-Group are identified by a prod-uct code number on the pump label. This number is also the catalog number for the pump. The meaning of each digit in the product code number is shown below. Not all combinations of motor, impeller and seal options are available for every pump model. Please check with Goulds on non-cataloged numbers.Not recommended for operation beyond printed H-Q curve. For critical applica-tion conditions consult factory.

    Las diferentes versiones de los modelos 3656 y 3756 del Grupo S se identifican con un nmero de cdigo de producto en la etiqueta de la bomba. Este nme-ro es tambin el nmero de catlogo de la bomba. A continuacin se ilustra el significado de cada dgito en el cdigo del producto.No todas las combinaciones de motor, impulsor y sellos estn disponibles para cada modelo. Consulte a Goulds sobre nmeros que no aparecen en el catlogo.No se recomienda la operacin ms all de la curva impresa de H-Q (carga-capacidad). Para aplicaciones bajo condiciones crticas, consulte con la fbrica.

    22BF 9BF 3BF 5BF 4BF 6BF 1 x 2 7 1 x 2 8 1 x 2 6 1 x 2 6H 1 x 2 8 2 x 3 7 3 x 4 7 Dia. Dia. Dia. Dia. Dia. Dia. Dia. A 6" 8116" 51516" 51516" 8116" 7116" 7116" B 6716 758 558 558 7

    58 678 638 C 6 7516 518 6 6

    916 5 D 5 7 4 5 6 41116 E 5 6 7 51116 5

    18 F 5116 6316 7 5716 6 G 41316 538 6 5316 H 4916 5

    18 618 4 J 438 4 K 4116 4116

    L 31316

    Driver, Elemento motor1 = 1 PH, fase, ODP 4 = 1PH, fase, TEFC 7 = 3 PH, fases, XP 0 = 1 PH, fase, XP2 = 3 PH, fases, ODP 5 = 3 PH, TEFC 8 = 575 V, XP3 = 575 V, ODP 6 = 575 V, TEFC 9 = 3 PH, fases, TEFC, PREFF1 PH, fase = Monofsico; 3 PH, fases = Trifsico

    HP Rating, Potencia nominal, HPC = HP F = 1 HP J = 5 HP M = 15 HPD = HP G = 2 HP K = 7 HP N = 20 HPE = 1 HP H = 3 HP L = 10 HP

    Driver: Hertz/Pole/RPM, Elemento motor: Hertz/Polos/RPM1 = 60 Hz, 2 pole, 3500 RPM 4 = 50 Hz, 2 pole, 2900 RPM2 = 60 Hz, 4 pole, 1750 RPM 5 = 50 Hz, 4 pole, 1450 RPM3 = 60 Hz, 6 pole, 1150 RPM

    Material, Material BF = Bronze fitted, Accesorios de bronce AI = All iron, Todo hierro AB = All bronze, Todo bronce

    Pump Size, Tamao de bomba3 = 1 x 2 6(H) 5 = 1 x 2 8 9 = 1 x 2 8 4 = 2 x 3 7 6 = 3 x 4 7 22 = 1 x 2 7

    Example Product Code, Ejemplo del cdigo de producto

    9 BF 1 H 2 G 0

    Mechanical Seal and O-ring, Sello mecnico y anillo en O

    Impeller Option Code, Cdigo de opcin de impulsor

    H

    High Head Impeller (1 x 2 6H Only), Impulsor de carga alta (1 x 2 6H nicamente)

    The 1 x 2 8 and 1 x 2 7 are only available in Bronze Fitted. Los tamaos 1 x 2 8 y 1 x 2 7 estn disponibles con accesorios de bronce nicamente.

    For frame mounted version, substitute the letters FRM in these positions.

    Para las versiones de montaje en bastidor, reempla-zar las letras en esta ubicacin con FRM.

    Impeller Code,Cdigo del impulsor

    0 Carbon,

    Ceramic, Cermica BUNA-N 10K13 1

    Carbn Sil-Carbide, EPR 10K19

    3 Carburo de Viton 10K27 5 Sil-Carbide silicona 10K64 9 Packed Box Design with BUNA O-Ring, Diseo de prensaestopas empacado con anillo en O de BUNA 15K16

    Note: 10K27 replaces obsolete 10K25, Nota: La 10K27 reemplace la obsoleta 10K25.

    Seal Code,Cdigodel Sello

    Stationary,Estacionario

    Type 21 Mechanical Seal, Tipo 21 sello mecnico

    Elastomers,Elastmeros

    316 SS,316 Acero inoxidable

    Metal Parts,Partes Metlicas

    Rotary,Rotativo

    Part No.,Pieza

    Nmero

  • 5GOULDS PUMPSCommercial Water

    Performance Curves 60 Hz, 3500 RPM Curvas de desempeo 60 Hz, 3500 RPM

    These curves show the performance of the 3656 and 3756 at 3500 RPM and 1750 RPM, 60 Hz, and at 2900 RPM and 1450 RPM, 50 Hz. Standard impeller trims are shown.

    Estas curvas ilustran el desempeo de los modelos 3656 y 3756 operando a 3500 RPM y 1750 RPM en 60 Hz, y a 2900 RPM y 1450 RPM en 50 Hz. Se muestran los dimetros de impulsor estndar.

    Optional ImpellerImpulsor optativo

    Ordering Code Dia. Cdigo de pedido Di.

    A 6" B 6

    716

    C 6

    D 5 E 5 F 5

    116

    G 41316

    H 4916

    J 438

    K 4116 L 31316

    NOTE:Pumpwillpassasphereto316"diameter.NOTA: La bomba dejar pasar una esfera de hasta 316 de pulgada de dimetro.

    Model 3656/3756 S-Group 3500 RPM22 BF / Size (Tama o) 1 x 2 7Imp. Dwg. CN0724R00

    NOTE: Not recommended for operationbeyond printed H-Q curve.NOTA: No se recomienda la operaci n m s allde la curva impresa de H-Q (carga-capacidad).

    D 53/4

    A 63/4 DIA.

    B 67/16

    C 6

    E 51/2

    F 51/16

    G 413/16

    H 49/16J 43/8K 41/16L 313/16

    58%

    NPSH FEET (PIES)40% EFF 46% 50% 56%

    50%

    8

    10

    5 HP

    20

    3 HP

    2 HP

    1 HP1.5 HP

    54%

    54%

    46%

    0

    20

    80

    100

    60

    40

    0

    0

    800

    m3 hr

    U.S. GPM

    25

    6040

    5 15

    20 100

    120

    140

    120

    10 20

    160

    180

    10

    20

    30

    40

    5060%

    58%

    METERSMETROS

    FEETPIES

    TOTAL DY

    NAMIC HEA

    D (CAR

    GA DIN

    MICA TO

    TAL)

    CAPACITY (CAPACIDAD)

    60%

    56%

    6

    Model 3656/3756 S-Group 3500 RPM9 BF / Size (Tama o) 1 x 2 8 ODP & TEFCImp. Dwg. CN0721R00

    NOTE: Not recommended for operationbeyond printed H-Q curve.NOTA: No se recomienda la operaci n m s allde la curva impresa de H-Q (carga-capacidad).

    0

    50

    0

    90

    0

    10060200

    m3 hr

    U.S. GPM

    25

    10 40 80 110

    300

    200

    25080

    70

    7030 50 90

    205 15

    150

    100

    60

    50

    40

    30

    20

    10

    METERSMETROS

    FEETPIES

    TOTA

    L DY

    NAMIC HEA

    D (CAR

    GA DIN

    MICA TO

    TAL)

    CAPACITY (CAPACIDAD)10

    NPSHR-FT (PIES) 43035 40

    45

    50% EFF

    10

    6

    10 HP

    7.5 HP

    5 HP

    3 HP

    A 81/16 DIA.

    C 75/16

    E 61/2

    G 53/8

    D 7

    F 63/16

    H 51/8

    B 75/8

    50

    Optional ImpellerImpulsor optativo

    Ordering Code Dia. Cdigo de pedido Di.

    A 8116" B 758" C 7

    516 D 7 E 6 F 6316 G 538 H 518

    NOTE:Pumpwillpassasphereto316"diameter.NOTA: La bomba dejar pasar una esfera de hasta 316 de pulgada de dimetro.

  • 6GOULDS PUMPSCommercial Water

    Performance Curves 60 Hz, 3500 RPM Curvas de desempeo 60 Hz, 3500 RPM

    D 434"

    A 51516" DIA.

    C 518"

    B 558"

    % EFF

    NPSHR FEET (PIES)

    Model 3656/3756 S-Group 3500 RPM3AI, BF, AB / Size (Tamao) 112 x 2 6 ODP & TEFCImp. Dwg. 114-04

    50

    5 HP

    3 HP

    40

    60 65

    70

    70

    72

    7273

    65

    60

    50

    5.5'

    10' 12'

    14'16'

    18'

    20'

    NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operacin ms all de la curvaimpresa de H-Q (carga-capacidad).

    0

    40

    80

    120

    160

    0

    10

    20

    30

    40

    50

    0

    18016012080400

    10 20 m3 hr

    U.S. GPM

    30 40

    20 60 100 140

    METERSMETROS

    FEETPIES

    TOTA

    L DY

    NAMIC HEA

    D (CAR

    GA DINM

    ICA TO

    TAL)

    CAPACITY (CAPACIDAD)

    6'8'7'

    Optional ImpellerImpulsor optativo

    Ordering Code Dia. Cdigo de pedido Di.

    A 51516"

    B 558"

    C 518 D 4

    NOTE: Pump will pass a sphere to 516" diameter.

    NOTA: La bomba dejar pasar una esfera de hasta 516 de pulgada de dimetro.

    Optional ImpellerImpulsor optativo

    Ordering Code Dia. Cdigo de pedido Di.

    A 51516"

    B 558

    NOTE: Pump will pass a sphere to 316" diameter.

    NOTA: La bomba dejar pasar una esfera de hasta 316 de pulgada de dimetro.

    A 51516" DIA.

    B 558"

    NPSHR FEET (PIES)

    0

    40

    80

    120

    160

    0

    10

    20

    30

    40

    50

    0

    12080400

    10 20 m3 hr

    U.S. GPM

    30

    20 60 100 160140

    METERSMETROS

    FEETPIES

    TOTA

    L DY

    NAMIC HEA

    D (CAR

    GA DINM

    ICA TO

    TAL)

    CAPACITY (CAPACIDAD)

    % EFF

    Model 3656/3756 S-Group 3500 RPM3AI, BF, AB / Size (Tamao) 112 x 2 6H ODP & TEFCImp. Dwg. 114-18 H = High Head Impeller H = Impulsor de carga alta

    3 HP

    40

    5.5'

    8'

    10'

    12'

    14'16'

    18'

    40

    50

    50

    60

    60

    65

    65

    67

    67

    6'

    7'

    NOTE: Not recommended for operation beyondprinted H-Q curve.May utilize 1.15 motor service factor.

    NOTA: No se recomienda la operacin ms all de lacurva impresa de H-Q (carga-capacidad).Puede utilizar factor de servicio 1.15.

  • 7GOULDS PUMPSCommercial Water

    Performance Curves 60 Hz, 3500 RPM Curvas de desempeo 60 Hz, 3500 RPM

    B 758"

    C 634"

    H 618"

    E 734"

    15 HP

    % EFF

    Model 3656/3756 S-Group 3450 RPM5AI, BF, AB / Size (Tamao) 112 x 2 8 ODP & TEFCImp. Dwg. 118-88

    A 8116" DIA.

    7 12 HP 10 HP

    10'

    5 HP

    20 HP

    504060

    60

    65

    65

    68

    8'12' 14'

    16'

    18'

    20'F 7"

    G 614"

    D 534"

    NPSHR FEET (PIES)

    NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operacin ms all de lacurva impresa de H-Q (carga-capacidad).

    0

    50

    100

    300

    0

    20

    60

    80

    0

    250150500

    10 20 m3 hr

    U.S. GPM

    60

    100 200

    30 40 50

    250

    200

    150

    40

    METERSMETROS

    FEETPIES

    TOTA

    L DY

    NAMIC HEA

    D (CAR

    GA DINM

    ICA TO

    TAL)

    CAPACITY (CAPACIDAD)

    Optional ImpellerImpulsor optativo

    Ordering Code Dia. Cdigo de pedido Di.

    A 8116" E 7" B 7

    58 F 7 C 6 G 6 H 618 D 5

    NOTE:Pumpwillpassasphereto516"diameter.NOTA: La bomba dejar pasar una esfera de hasta 516 de pulgada de dimetro.

    00

    70

    0

    250 3000

    m3 hr

    U.S. GPM350

    40

    10

    20

    100

    50

    200

    80

    250

    200

    150

    60

    50

    40

    30

    20

    100

    METERSMETROS

    FEETPIES

    TOTA

    L DY

    NAMIC HEA

    D (CAR

    GA DINM

    ICA TO

    TAL)

    CAPACITY (CAPACIDAD)

    15050

    10 30 6050 70

    Model 3656/3756 S-Group 3500 RPM4AI, BF, AB / Size (Tamao) 212 x 3 7 ODP & TEFCImp. Dwg. 279-81

    NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operacin ms all de lacurva impresa de H-Q (carga-capacidad).

    6' NPSHR FEET (PIES)8' 10'

    D 6''

    H 43/4''

    % EFF

    10 HP

    7.5 HP5 HP

    15 HP

    60

    68

    64

    70

    70

    12' 14'

    16' 18'

    A 71/16'' DIA.B 67/8''

    F 57/16''

    K 41/16''

    C 69/16''

    E 511/16''

    J 41/2''

    G 53/16''

    7171

    64

    68

    Optional ImpellerImpulsor optativo

    Ordering Code Dia. Cdigo de pedido Di.

    A 7116" B 6

    78 C 6

    916 D 6 E 5

    1116 F 5

    716 G 5

    316 H 4 J 4 K 4116

    NOTE:Pumpwillpassasphereto716"diameter.NOTA: La bomba dejar pasar una esfera de hasta 716 de pulgada de dimetro.

  • 8GOULDS PUMPSCommercial Water

    Performance Curves 60 Hz, 3500 RPMCurvas de desempeo 60 Hz, 3500 RPM

    % EFF

    Model 3656/3756 S-Group 3500 RPM6AI, BF / Size 3 x 4-7Imp. Dwg. 114-05

    B 638" DIA.

    7 12 HP

    E 518"

    C 512"

    10 HP

    6'

    50

    D 41116"

    15 HP

    50

    60

    60 65

    65

    68

    68 70

    70

    8'

    10'12'

    16'

    74

    NPSHR FEET (PIES)

    NOTE: Not recommended for operation beyondprinted H-Q curve.May utilize 1.15 motor service factor.

    NOTA: No se recomienda la operacin ms all de lacurva impresa de H-Q (carga-capacidad).Puede utilizar factor de servicio 1.15.

    0

    25

    75

    175

    0

    20

    40

    0

    6000

    10 20 m3 hr

    U.S. GPM

    150

    100 200

    30 40 50

    150

    125

    10030

    500400300

    1007060

    10

    50

    60

    1401301201109080

    50

    200

    METERSMETROS

    FEETPIES

    TOTA

    L DY

    NAMIC HEA

    D (CAR

    GA DINM

    ICA TO

    TAL)

    CAPACITY (CAPACIDAD)

    Optional ImpellerImpulsor optativo

    Ordering Code Dia. Cdigo de pedido Di.

    B 638"

    C 5 D 41116 E 518 F 6

    NOTE:Pumpwillpassasphereto"diameter.NOTA: La bomba dejar pasar una esfera de hasta de pulgada de dimetro.

    Optional ImpellerImpulsor optativo

    Ordering Code Dia. Cdigo de pedido Di.

    A 6" B 6

    716

    C 6

    D 5 E 5 F 5

    116

    G 41316

    H 4916

    J 438

    K 4116 L 31316

    NOTE:Pumpwillpassasphereto316"diameter.NOTA: La bomba dejar pasar una esfera de hasta 316 de pulgada de dimetro.

    Model 3656/3756 S-Group 1750 RPM22 BF / Size (Tama o) 1 x 2 7Imp. Dwg. 277-75

    NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operaci n m s all de lacurva impresa de H-Q (carga-capacidad).

    0

    10

    40

    50

    30

    20

    0

    60200U.S. GPM

    15

    10 40 7030 50

    5 10

    0

    15

    10

    5

    METERSMETROS

    FEETPIES

    TOTA

    L DY

    NAMIC HEA

    D (CAR

    GA DIN

    MICA TO

    TAL)

    CAPACITY (CAPACIDAD)m3 hr

    30% EFF40%

    47%52%

    2 NPSH55%

    .5 HP

    .75 HP

    47%

    455%18

    52%

    A 63/4 DIA.

    B 67/16

    C 6

    D 53/4

    E 51/2

    F 51/16

    G 413/16

    H 49/16J 43/8

    K 41/16L 313/16

    Performance Curves 60 Hz, 1750 RPMCurvas de desempeo 60 Hz, 1750 RPM

  • 9GOULDS PUMPSCommercial Water

    Performance Curves 60 Hz, 1750 RPMCurvas de desempeo 60 Hz, 1750 RPM

    0

    10

    0

    20

    0

    75706040200

    6 10 m3 hr

    U.S. GPM

    14 16

    10 30 50 65

    20

    40

    30

    70

    5

    50

    60

    15

    10

    45255 15 35 55

    12842

    METERSMETROS

    FEETPIES

    TOTAL DY

    NAMIC HEA

    D (CAR

    GA DINM

    ICA TO

    TAL)

    CAPACITY (CAPACIDAD)

    25 30 3540

    45

    % EFF

    4'

    45

    1 12 HP

    1 HP

    34 HP

    12 HP

    20

    A 81/16'' DIA.

    C 75/16

    E 61/2

    F 63/16

    G 53/8H 51/8

    Model 3656/3756 S-Group 1750 RPM9BF / Size (Tamao) 1 x 2 8Imp. Dwg. 120-67

    NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operacin ms all de lacurva impresa de H-Q (carga-capacidad).

    NPSHR FEET (PIES) 3

    Model 3656/3756 S-Group 1750 RPM3AI, BF, AB / Size (Tamao) 112 x 2 6Imp. Dwg. 114-04

    3'

    34 HP

    12 HP

    4'

    5'

    9'

    50

    60

    65

    68

    NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operacin ms all de lacurva impresa de H-Q (carga-capacidad).

    68

    5

    10

    15

    2

    10

    0

    90806040200

    5 10 m3 hr

    U.S. GPM

    15 20

    10 30 50 70

    20

    25

    30

    35

    4

    6

    8

    METERSMETROS

    FEETPIES

    TOTA

    L DY

    NAMIC HEA

    D (CAR

    GA DINM

    ICA TO

    TAL)

    CAPACITY (CAPACIDAD)

    % EFF 50

    A 51516" DIA.

    B 558"

    C 518"

    D 434"

    NPSHR FEET (PIES)

    6065

    Optional ImpellerImpulsor optativo

    Ordering Code Dia. Cdigo de pedido Di.

    A 8116" C 7

    516 E 6

    F 6316

    G 538

    H 518

    NOTE:Pumpwillpassasphereto316"diameter.NOTA: La bomba dejar pasar una esfera de hasta 316 de pulgada de dimetro.

    Optional ImpellerImpulsor optativo

    Ordering Code Dia. Cdigo de pedido Di.

    A 51516" B 5

    58 C 518 D 4

    NOTE:Pumpwillpassasphereto516"diameter.NOTA: La bomba dejar pasar una esfera de hasta 516 de pulgada de dimetro.

  • 10GOULDS PUMPSCommercial Water

    Performance Curves 60 Hz, 1750 RPMCurvas de desempeo 60 Hz, 1750 RPM

    A 51516" DIA.

    B 558"

    % EFF

    Model 3656/3756 S-Group 1750 RPM3AI, BF, AB / Size (Tamao) 112 x 2 6HImp. Dwg. 114-18 H = High Head Impeller H = Impulsor de carga alta

    403'

    12 HP

    50

    50

    55

    5560

    60

    66

    664'

    5'

    6'

    7'

    NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operacin ms all de lacurva impresa de H-Q (carga-capacidad).

    NPSHR FEET (PIES)

    5

    10

    15

    2

    10

    0

    806040200

    5 10 m3 hr

    U.S. GPM

    15 20

    10 30 50 70

    20

    25

    30

    35

    4

    6

    8

    9

    7

    5

    3

    METERSMETROS

    FEETPIES

    TOTA

    L DY

    NAMIC HEA

    D (CAR

    GA DINM

    ICA TO

    TAL)

    CAPACITY (CAPACIDAD)

    A 8116" DIA.

    B 758"

    C 634"

    D 534"

    % EFF NPSHR FEET (PIES)

    Model 3656/3756 S-Group 1725 RPM5AI, BF, AB / Size (Tamao) 112 x 2 8Imp. Dwg. 118-88

    50

    3'

    1 HP

    2 HP

    3 HP

    1 12 HP

    6066

    5'

    7'

    NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operacin ms all de lacurva impresa de H-Q (carga-capacidad).

    64

    66

    6460

    20

    30

    5

    20

    0

    16012080400

    10 20 m3 hr

    U.S. GPM

    30 40

    20 60 100 140

    40

    50

    60

    0

    15

    10

    METERSMETROS

    FEETPIES

    TOTA

    L DY

    NAMIC HEA

    D (CAR

    GA DINM

    ICA TO

    TAL)

    CAPACITY (CAPACIDAD)

    10

    0

    Optional ImpellerImpulsor optativo

    Ordering Code Dia. Cdigo de pedido Di.

    A 8116" B 7

    58 C 6 D 5

    NOTE:Pumpwillpassasphereto516"diameter.NOTA: La bomba dejar pasar una esfera de hasta 516 de pulgada de dimetro.

    Optional ImpellerImpulsor optativo

    Ordering Code Dia. Cdigo de pedido Di.

    A 51516" B 558

    NOTE:Pumpwillpassasphereto316"diameter.

    NOTA: La bomba dejar pasar una esfera de hasta 316 de pulgada de dimetro.

  • 11GOULDS PUMPSCommercial Water

    Performance Curves 60 Hz, 1750 RPMCurvas de desempeo 60 Hz, 1750 RPM

    Model 3656/3756 S-Group 1750 RPM4AI, BF, AB / Size (Tamao) 212 x 3 7Imp. Dwg. CN0710R00

    NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operacin ms all de lacurva impresa de H-Q (carga-capacidad).

    00

    15

    0

    140 160800

    m3 hr

    U.S. GPM40 180

    60

    3020

    10

    10

    50

    40

    30

    20

    10

    5

    120

    40

    METERSMETROS

    FEETPIES

    TOTA

    L DY

    NAMIC HEA

    D (CAR

    GA DINM

    ICA TO

    TAL)

    CAPACITY (CAPACIDAD)

    6020 100

    5 15 25 35

    % EFF

    5'

    1 12 HP

    34 HP12 HP

    60

    66

    64

    6'

    2 HP

    1 HP

    A 71/16'' DIA.

    C 69/16

    NPSHR FEET (PIES) 3

    B 67/8

    E 511/16

    F 57/16

    G 53/16

    J 41/2

    H 43/4

    K 41/16

    D 6

    4'64 66

    68

    68 70

    70

    A 7116" DIA.

    B 638"

    C 512"

    NPSHR FEET (PIES)

    % EFF

    Model 3656/3756 S-Group 1750 RPM6AI, BF, AB / Size (Tamao) 3 x 4 7Imp. Dwg. 114-05

    355'

    1 12 HP 1 HP

    2 HP

    3 HP

    48

    48

    60

    60

    65

    65

    67

    67

    4'

    8'

    16'

    F 6"

    NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operacin ms all de lacurva impresa de H-Q (carga-capacidad).

    D 41116"

    10

    20

    0

    15

    0

    3002001000

    10 20 m3 hr

    U.S. GPM

    40 90

    50 150 250 350

    30

    40

    50

    0

    10

    5

    30 50 60 70 80

    METERSMETROS

    FEETPIES

    TOTA

    L DY

    NAMIC HEA

    D (CAR

    GA DINM

    ICA TO

    TAL)

    CAPACITY (CAPACIDAD)

    Optional ImpellerImpulsor optativo

    Ordering Code Dia. Cdigo de pedido Di.

    A 7116" B 6

    78

    C 6916

    D 6 E 5

    1116 F 5

    716

    G 5316

    H 4

    J 4 K 4116

    NOTE:Pumpwillpassasphereto716"diameter.NOTA: La bomba dejar pasar una esfera de hasta 716 de pulgada de dimetro.

    Optional ImpellerImpulsor optativo

    Ordering Code Dia. Cdigo de pedido Di.

    A 7116" B 6

    38 C 5 D 41116 F 6

    NOTE:Pumpwillpassasphereto"diameter.NOTA: La bomba dejar pasar una esfera de hasta de pulgada de dimetro.

  • 12GOULDS PUMPSCommercial Water

    Performance Curves 50 Hz, 2900 RPMCurvas de desempeo 50 Hz, 2900 RPM

    Optional ImpellerImpulsor optativo

    Ordering Code Dia. Cdigo de pedido Di.

    A 8116" B 7

    58 C 7516 D 7 E 6 F 6316 G 538 H 518

    NOTE:Pumpwillpassasphereto516"diameter.NOTA: La bomba dejar pasar una esfera de hasta 516 de pulgada de dimetro.

    Optional ImpellerImpulsor optativo

    Ordering Code Dia. Cdigo de pedido Di.

    A 6" B 6716 C 6 D 5 E 5 F 5116 G 41316 H 4916 J 438 K 4116 L 31316

    NOTE:Pumpwillpassasphereto316"diameter.

    NOTA: La bomba dejar pasar una esfera de hasta 316 de pulgada de dimetro.

    A 63/4 DIA.

    B 67/16

    C 6

    E 51/2

    F 51/16

    K 41/16

    L 313/16

    J 43/8

    H 49/16

    G 413/16

    D 53/4

    Model 3656/3756 S-Group 2900 RPM22 BF / Size (Tama o) 1 x 2 7Imp. Dwg. 277-75

    3.0 HP

    2.0 HP

    1.5 HP

    1.0 HP

    .75 HP

    4

    51%

    48%

    NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operaci n m s all de lacurva impresa de H-Q (carga-capacidad).

    0

    20

    100

    0

    0

    80300

    m3 hr

    U.S. GPM

    25

    10 60 9040 70

    5 15

    20 50 100 110

    10 20

    10

    20

    3057%

    57%

    55%

    40

    60

    80

    120

    4

    METERSMETROS

    FEETPIES

    TOTA

    L DY

    NAMIC HEA

    D (CAR

    GA DIN

    MICA TO

    TAL)

    CAPACITY (CAPACIDAD)

    55%

    35%EFF 43% 48%51%

    6

    13

    3NPSHR FEET (PIES)

    Model 3656/3756 S-Group 2900 RPM9 BF / Size (Tama o) 1 x 2 8Imp. Dwg. 120-67

    NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operaci n m s all de lacurva impresa de H-Q (carga-capacidad).

    0

    50

    0

    0

    10060200

    m3 hr

    U.S. GPM

    25

    10 40 80 110

    200

    70

    7030 50 90

    205 10

    150

    100

    60

    50

    40

    30

    20

    10

    15

    METERSMETROS

    FEETPIES

    TOTA

    L DY

    NAMIC HEA

    D (CAR

    GA DIN

    MICA TO

    TAL)

    CAPACITY (CAPACIDAD)

    E 61/2

    G 53/8

    20 25 31 3742

    47

    47 % EFF

    8

    4

    3 HP

    2 HP

    A 81/16 DIA.

    B 75/8

    C 75/16

    D 7

    F 63/16

    H 51/8

    1.5 HP

    5 HP

    NPSHR FEET (PIES) 3

  • 13GOULDS PUMPSCommercial Water

    Performance Curves 50 Hz, 2900 RPMCurvas de desempeo 50 Hz, 2900 RPM

    Optional ImpellerImpulsor optativo

    Ordering Code Dia. Cdigo de pedido Di.

    A 51516" B 558" C 5

    18 D 4

    NOTE:Pumpwillpassasphereto716"diameter.NOTA: La bomba dejar pasar una esfera de hasta 716 de pulgada de dimetro.

    Optional ImpellerImpulsor optativo

    Ordering Code Dia. Cdigo de pedido Di.

    A 51516" B 5

    58

    NOTE:Pumpwillpassasphereto"diameter.NOTA: La bomba dejar pasar una esfera de hasta de pulgada de dimetro.

    B 558"

    C 518"

    3 HP

    2 HP

    Model 3656/3756 S-Group 2900 RPM3AI, BF, AB / Size (Tamao) 112 x 2 6Imp. Dwg. 114-04

    % EFF

    45

    56 62

    67

    67

    69

    69

    62

    56

    45

    10'

    12'

    NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operacin ms all de lacurva impresa de H-Q (carga-capacidad).

    0

    20

    40

    100

    120

    0

    10

    40

    60

    70

    0

    16012080400

    10 20 m3 hr

    U.S. GPM

    30 35

    20 60 100 140

    5 15 25

    80

    60

    20

    METERSMETROS

    FEETPIES

    TOTA

    L DY

    NAMIC HEA

    D (CAR

    GA DINM

    ICA TO

    TAL)

    CAPACITY (CAPACIDAD)

    3'4'

    A 51516" DIA.

    D 434"

    7'

    1.5 HP

    NPSHR FEET (PIES)

    0

    40

    60

    100

    120

    0

    10

    20

    30

    40

    0

    12080400

    10 20 m3 hr

    U.S. GPM

    30

    20 60 100 140

    20

    80

    5 15 25

    METERSMETROS

    FEETPIES

    TOTA

    L DY

    NAMIC HEA

    D (CAR

    GA DINM

    ICA TO

    TAL)

    CAPACITY (CAPACIDAD)

    Model 3656/3756 S-Group 2900 RPM3AI, BF, AB / Size (Tamao) 112 x 2 6HImp. Dwg. 114-18 H = High Head Impeller H = Impulsor de carga alta

    A 51516" DIA.

    B 558"7'

    10'

    50% EFF

    50

    55

    55

    61

    61

    66

    66

    3'

    4'

    NOTE: Not recommended for operationbeyond printed H-Q curve.NOTA: No se recomienda la operacin ms all dela curva impresa de H-Q (carga-capacidad).

    NPSHR FEET (PIES)

    12'

    2 HP

  • 14GOULDS PUMPSCommercial Water

    Performance Curves 50 Hz, 2900 RPMCurvas de desempeo 50 Hz, 2900 RPM

    Optional ImpellerImpulsor optativo

    Ordering Code Dia. Cdigo de pedido Di.

    A 7116" B 678 C 6916 D 6 E 51116 F 5716 G 5316 H 4 J 4 K 4116

    NOTE:Pumpwillpassasphereto516"diameter.NOTA: La bomba dejar pasar una esfera de hasta 516 de pulgada de dimetro.

    Optional ImpellerImpulsor optativo

    Ordering Code Dia. Cdigo de pedido Di.

    A 8116" B 758 C 6 D 5

    NOTE:Pumpwillpassasphereto316"diameter.

    NOTA: La bomba dejar pasar una esfera de hasta 316 de pulgada de dimetro.

    % EFF

    Model 3656/3756 S-Group 2900 RPM5AI, BF, AB / Size (Tamao) 112 x 2 8Imp. Dwg. 118-88

    47

    7 12 HP 5 HP

    3 HP

    10 HP

    47 57

    64

    68

    6'

    10'

    13'

    15'57

    NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operacin ms all de lacurva impresa de H-Q (carga-capacidad).

    NPSHR FEET (PIES)

    D 534"

    C 634"

    B 758"

    A 8116" DIA. 7'64

    0

    50

    100

    0

    10

    60

    0

    150500

    10 20 m3 hr

    U.S. GPM100 200

    30 40 50

    200

    150

    40

    20

    30

    50

    70

    METERSMETROS

    FEETPIES

    TOTA

    L DY

    NAMIC HEA

    D (CAR

    GA DINM

    ICA TO

    TAL)

    CAPACITY (CAPACIDAD)

    Model 3656/3756 S-Group 2900 RPM4AI, BF, AB / Size (Tamao) 212 x 3 7Imp. Dwg. CN0712R00

    10 HP

    10'12' 15'

    NOTE: Not recommended for operation beyond printedH-Q curve.NOTA: No se recomienda la operacin ms all de la curvaimpresa de H-Q (carga-capacidad).

    00

    50

    0

    0

    m3 hr

    U.S. GPM50

    20

    40

    10

    100

    80

    60

    20

    100

    40

    120

    140

    160

    30

    20

    10

    150 200 250 300

    40 6030 50 70

    METERSMETROS

    FEETPIES

    TOTA

    L DY

    NAMIC HEA

    D (CAR

    GA DINM

    ICA TO

    TAL)

    CAPACITY (CAPACIDAD)

    % EFF

    7 12 HP

    70

    68

    5 HP

    2 HP

    3 HP

    7'

    D 6

    E 511/16

    H 43/4

    J 41/2

    K 41/16

    3 NPSHR FEET (PIES)

    5'70

    6864

    6050

    C 69/16

    F 57/16

    A 71/16'' DIA.

    B 67/8

    G 53/16

  • 15GOULDS PUMPSCommercial Water

    Performance Curves 50 Hz, 2900 RPMCurvas de desempeo 50 Hz, 2900 RPM

    Optional ImpellerImpulsor optativo

    Ordering Code Dia. Cdigo de pedido Di.

    A 7116" B 6

    38 C 5

    D 41116

    F 6

    NOTE:Pumpwillpassasphereto716"diameter.NOTA: La bomba dejar pasar una esfera de hasta 716 de pulgada de dimetro.

    % EFF

    Model 3656/3756 S-Group 2900 RPM6AI, BF, AB / Size (Tamao) 3 x 4 7Imp. Dwg. 114-05

    378'

    50

    50

    62

    67

    67

    69

    69

    9'

    5 HP

    7 12 HP

    10 HP

    15 HP

    62

    14'

    20'

    F 6"

    NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operacin ms all de lacurva impresa de H-Q (carga-capacidad).

    A 7116" DIA.

    B 638"

    C 512"

    D 41116"

    0

    40

    0

    4502001000

    20 m3 hr

    U.S. GPM

    40

    50 150 400 5000

    10

    5

    60 80

    20

    40

    60

    80

    100

    120

    140

    160

    15

    20

    25

    30

    35

    45

    50

    250 300 350 550 600 650

    100 120 140

    METERSMETROS

    FEETPIES

    TOTA

    L DY

    NAMIC HEA

    D (CAR

    GA DINM

    ICA TO

    TAL)

    CAPACITY (CAPACIDAD)

    6 NPSHR FEET (PIES)

  • 16GOULDS PUMPSCommercial Water

    3656 S-Group Materials of ConstructionMateriales de construccin - Grupo S, modelo 3756

    NOTE:Pumps will be shipped with top-vertical discharge position as standard. For other orientations, remove casing bolts rotate discharge to desired position replace and tighten bolts to 25 ft./lbs. Note that discharge may extend below motor mounting surface in bottom-horizontal position; adequate clearance must be provided.

    NOTA:Las bombas salen de la fbrica con la des-carga orientada en posicin vertical superior de manera estndar. Para modificar la orien-tacin, retirar los pernos de la carcasa, hacer girar la descarga hasta la posicin deseada y volver a colocar los pernos, ajustndolos a una torsin de 25 pies/libras. Se ha de notar que la descarga se puede extender por debajo de la superficie de montaje del motor en la posicin horizontal inferior; por lo tanto, debe proveerse suficiente espacio.

    For separate seal housing and adapter construction, all bronze material only, see repair parts page.

    Para la construccin separada del compartimiento del sello y el adaptador, materiales de bronce nicamente, con-sulte la pgina de piezas de repuesto.

    1

    AISI 1045 steel motor shaft extension (typical)Extensin del eje del motor de acero AISI 1045 (tpico)

    101

    103

    383

    178

    126

    198

    199

    370408

    513 108

    371

    100

    Back wearing ring on S-Group (2 x 3 7) onlyAnillo de desgaste posterior en elGrupo S (2 x 3 7) nicamente.

    1

    Item No. Description

    Materials, Materiales No. tem Descripcin

    All Iron Bronze Fitted All Bronze Todo hierro Accesorios de bronce Todo bronce

    100 Casing, Carcasa 1001 101 Impeller, Impulsor 1101

    1101

    103

    Casing wear ring, 1001 1618 1618 Anillo de desgaste de la carcasa

    108 Adapter, Adaptador 1001 1001 184 Seal housing, Cubierta del sello One piece with adapter, Una pieza con adaptador 1101 126 Shaft sleeve, Camisa del eje

    AISI Type 300 series stainless steel 198 Impeller bolt, Perno del impulsor Acero inoxidable serie AISI tipo 300 199 Impeller washer, Arandela del impulsor 178 Impeller key, Chaveta del impulsor Carbon Steel, Acero al carbono

    370 Hex head cap screw (adapter to case), Tornillo de

    cabeza hexagonal (del adaptador a la cubierta) Steel SAE 1200 Grade 5

    371 Hex head cap screw (adapter to motor), Tornillo de Acero SAE 1200 grado 5

    cabeza hexagonal (del adaptador al motor) 383 Mechanical seal, Sello mecnico See seal chart, Ver tabla del sello

    408 Pipe plug " or 38",

    Tapn de tubos de de pulgada 38 de pulgada Steel, Acero Bronze, Bronce

    513 O-ring, Anillo en O BUNA-N, BUNA-N

    Material Code, Cdigo de material Engineering Standard, Norma de ingeniera

    1101 Cast iron ASTM A48 CL20, Hierro fundido ASTM A48 CL20 1101 Silicon bronze ASTM B584, C87500, Siliciuro de bronce ASTM B584, C87500 1618 Bizmuth brass, Latn al bismuto

    Packed Box Arrangement, Caja prensaestopas Item No., No. tem Description, Descripcin Materials, Materiales 105 Lantern ring, Aro de linterna TeflonTM

    106

    Packing, 5 rings; Teflon Impregnated, Empaquetadura, 5 aros Impregnado de Teflon 107 Gland, Casquillo AISI 316SS 126 Shaft sleeve, Camisa del eje

    AISI Type 300 Series Stainless Steel 353 Gland stud, Perno del casquillo

    Acero inoxidable serie AISI tipo 300 355 Gland nut, Tuerca del casquillo

    105 106 107

    353

    126

    355

    PackedBoxArrangementCaja prensaestopas

    0 Carbon,

    Ceramic, Cermica BUNA-N 10K13 1

    Carbn Sil-Carbide, EPR 10K19

    3 Carburo de Viton

    10K27 5 Sil-Carbide silicona 10K64 9 Packed Box Design with BUNA O-Ring, Diseo de prensaestopas empacado con anillo en O de BUNA 15K16Note: 10K27 replaces obsolete 10K25, Nota: La 10K27 reemplace la obsoleta 10K25.

    Seal Code,Cdigodel Sello

    Stationary,Estacionario

    Type 21 Mechanical Seal, Tipo 21 sello mecnico

    Elastomers,Elastmeros

    316 SS,316 Acero inoxidable

    Metal Parts,Partes Metlicas

    Rotary,Rotativo

    Part No.,Pieza

    Nmero

  • 17GOULDS PUMPSCommercial Water

    3756 S-Group Materials of ConstructionMateriales de construccin - Grupo S, modelo 3756

    NOTE:Above shows typical AI or BF construction. For separate seal housing adapter, all bronze con-struction, see repair parts.

    Pumps will be shipped with top-vertical discharge position as standard. For other orientations, remove casing bolts rotate discharge to desired position replace and tighten bolts to 25 ft./lbs. Note that discharge may extend below motor mounting surface in bottom-horizontal position; adequate clearance must be provided.

    NOTA:Esta informacin corresponde a las construcciones tpicas AI y BF. Para el adaptador separado del comparti-miento de sellos y construccin en todo bronce, consulte las partes de repuesto.

    Las bombas salen de la fbrica con la descarga orientada en posicin vertical superior de manera estndar. Para modificar la orientacin, retirar los pernos de la carcasa, hacer girar la descarga hasta la posicin deseada y volver a colocar los pernos, ajustndolos a una torsin de 25 pies/libras. Se ha de notar que la descarga se puede extender por debajo de la superficie de montaje del motor en la posicin horizontal inferior; por lo tanto, debe proveer-se suficiente espacio.

    Item No. Description

    Materials, Materiales No. tem Descripcin

    All Iron Bronze Fitted All Bronze Todo hierro Accesorios de bronce Todo bronce

    100 Casing, Carcasa 1001 101 Impeller, Impulsor 1101

    1101

    103

    Casing wear ring, 1001 1618 1618 Anillo de desgaste de la carcasa

    108 Adapter, Adaptador 1001 1001 184 Seal housing, Cubierta del sello One piece with adapter, Una pieza con adaptador 1101 112 Ball bearing (outboard), Cojinete de bolas (exterior) Steel, Acero

    122 Shaft, Eje Carbon steel,

    Acero al carbono 123 V-ring (Deflector), Anillo en V (Deflector) BUNA-N 126 Shaft sleeve, Camisa del eje AISI Type 303 SS, Acero inoxidable AISI tipo 303 134 Bearing cover, Cubierta del cojinete 1001 168 Ball bearing (inboard), Cojinete de bolas (interior) Steel, Acero 178 Impeller key, Chaveta del impulsor Carbon steel, Acero al carbono 198 Impeller screw, Tornillo del impulsor AISI Type 303 Series SS 199 Impeller washer, Arandela del impulsor Acero inoxidable serie AISI tipo 300

    228 Bearing frame, Marco de cojinete 1001 333A Lip seal, Sello con reborde

    370 Hex head cap screw (adapter to case), Tornillo de

    cabeza hexagonal (del adaptador a la cubierta)

    370B Hex head cap screw (adapter to bearing frame),Tornillo de

    cabeza hexagonal (del adaptador al marco de cojinetes) Steel SAE 1200 Grade 5

    370C

    Hex head cap screw (bearing cover to frame),Tornillo de Acero SAE 1200 grado 5

    cabeza hexagonal (de la cubierta de cojinetes al marco) 382 Retaining ring, Anillo de retencin 383 Mechanical seal, Sello mecnico See seal chart, Ver tabla del sello

    408 Pipe plug " or 38",

    Tapn de tubos de de pulgada 38 de pulgada Steel, Acero Bronze, Bronce

    513 O-ring, Anillo en O BUNA-N, BUNA-N

    Material Code, Cdigo de material Engineering Standard, Norma de ingeniera

    1101 Cast iron ASTM A48 CL20, Hierro fundido ASTM A48 CL20 1101 Silicon bronze ASTM B584, C87500, Siliciuro de bronce ASTM B584, C87500 1618 Bizmuth brass, Latn al bismuto

    100

    178

    198

    101

    199

    103

    126

    383

    408 370 123

    382

    333A

    134

    112122228168108513 370C

    370B

    Packed Box Arrangement, Caja prensaestopas Item No., No. tem Description, Descripcin Materials, Materiales 105 Lantern ring, Aro de linterna TeflonTM

    106 Packing, 5 rings; Empaquetadura, 5 aros Teflon Impregnated, Impregnado de Teflon 107 Gland, Casquillo AISI 316SS 126 Shaft sleeve, Camisa del eje

    AISI Type 300 Series Stainless Steel, 353 Gland stud, Perno del casquillo Acero inoxidable serie AISI tipo 300 355 Gland nut, Tuerca del casquillo

    105 106 107

    353

    126

    355

    Packed Box ArrangementCaja prensaestopas

  • 18GOULDS PUMPSCommercial Water

    CP DC Wt. (lbs.) Motor Frame Size, Bastidor Pump Suction Discharge Max. Max. DD R W X Y Z Pesos 140 180 210 250

    Bomba Succin Descarga

    (libras) L 1 x 2 7

    1 27 3

    1116 418 5 3 4 52 10 10

    1 x 2 8

    2 4 4 31516 5 3316 4 52

    1 x 2 6 1

    23 3 1

    4 258

    3 34 9 10

    1 x 2 8 2718 538 458 4 5 4 54 1138 11

    58 2 x 3 7 3 2 2558 518 4 11316 6

    3 4 49 1018 10 11

    3 x 4 7 4* 3* 25 5 518 3 438 2 4 82 9 10

    38 1138

    3656 S-Group Dimensions and WeightsGrupo S, modelo 3656 - Peso y dimensiones

    NOTE:All pumps shipped in vertical discharge position. May be rotated in 90 increments. Tighten casing bolts to 25 ft./lbs. torque.

    NOTA:Todas las bombas se embarcan con la descarga en posicin vertical. Esta posicin puede rotarse en incrementos de 90. Ajustar los pernos de la carcasa a una torsin de 25 pies/libras.

    ABMAX. Z R

    X

    DG

    E EA

    14" NPT

    DCMAX

    DD

    Y W

    L F FB

    CPMAX.

    PMAX.

    H - 4 HOLES4 ORIFICIOS

    Motor Frame 3500 RPM 1750 RPM Bastidor 1 Phase 3 Phase 1 Phase 3 Phase del motor ODP TEFC ODP TEFC ODP TEFC ODP TEFC 143 , 1, 1 , 1, 1 , 1, 1 , , , 1 , , 1 145 2 2, 3 2, 3 1, 1 1, 2 1, 2 182 3 3 5 3 3 2, 3 3 3 184 5 3, 5 7 5 5 5 213 7 10 7 5 7 7 215 10 15 10, 15 254TCZ 20 256TCZ 25 20, 25

    All dimensions in inches and weights in lbs. Do not use for construction purposes.Todas las dimensiones estn en pulgadas, el peso en libras. No utilizar para fines de construccin.

    Motor Frames and Horsepower Bastidores del motor y potencia en HP

    Pump Dimensions and Weights (Dimension L determined by Pump and Motor)Peso y dimensiones de la bomba (la dimensin L est determinada por la bomba y el motor)

    DISCHARGEDESCARGA

    SUCTIONSUCCIN

    Frame Size JM AB

    P Weight (lbs.)

    Tamao del A B D E F G H

    (Max.)

    bastidor JM (Max.)

    Pesos (libras)

    143 2 41

    145 6 5 6 3 2 2

    18 1132 6

    58 57

    182 2 77 184

    8 578 6 4 3 2 316 1332 778 97

    213 2 122 215

    9 738 8 5 4 3

    732 1332 958 155 254 TCZ 9 418 265 256 TCZ

    11 9 11

    6 5 5

    1732 11 320

    Mechanical SealSello mecnico

    Motor Dimensions and Weights (may vary with manufacturer)* Peso y dimensiones del motor (pueden variar de acuerdo al fabricante) *

    *For use with ANSI class 150 mating flange. All others are NPT connections.* Para uso con brida de contacto ANSI clase 150. Todas las dems son conexiones NTP.

  • 19GOULDS PUMPSCommercial Water

    CP DC Wt. (lbs.) Motor Frame Size, Bastidor Pump Suction Discharge Max. Max. DD R W X Y Z Pesos 140 180 210 250

    Bomba Succin Descarga

    (libras) L 1 x 2 7

    1 30 3 7316 5 3 4 52 13116

    131316

    1 x 2 8

    2 4 4 7 5 3316 4 52

    1 x 2 6 1

    26 3 1

    4 258

    3 34 121316

    13916

    1 x 2 8 3018 538 458 7516 5 4 54 14716 11

    58 2 x 3 7 3 2 2858 518 4 11316 6

    3 4 49 13316 131316 14

    1316

    3 x 4 7 4* 3* 28 5 518 3 7716 2 4 82 12

    1316 13716 14

    716

    3656 S-Group Dimensions and WeightsGrupo S, modelo 3656 - Peso y dimensiones

    NOTE:All pumps shipped in vertical discharge position. May be rotated in 90 increments. Tighten casing bolts to 25 ft./lbs. torque.

    NOTA:Todas las bombas se embarcan con la descarga en posicin vertical. Esta posicin puede rotarse en incrementos de 90. Ajustar los pernos de la carcasa a una torsin de 25 pies/libras.

    1116

    ABMAX. Z R

    X

    DG

    E EA

    14" NPT

    DCMAX

    DD

    Y W

    L F FB

    CPMAX.

    PMAX.

    H - 4 HOLES4 ORIFICIOS

    Motor Frame 3500 RPM 1750 RPM Bastidor 1 Phase 3 Phase 1 Phase 3 Phase del motor ODP TEFC ODP TEFC ODP TEFC ODP TEFC 143 JP 1 145 JP 3 2, 3 1, 2 1, 2 182 JP 3 5 3 3 3 184 JP 5 7 5 5 5 213 TCZ 7 10 7 5 215 TCZ 10 15 10, 15 254 TCZ 20 256 TCZ 25

    All dimensions in inches and weights in lbs. Do not use for construction purposes.Todas las dimensiones estn en pulgadas, el peso en libras. No utilizar para fines de construccin. TCZ indicates west coast fit.

    Motor Frames and Horsepower Bastidores del motor y potencia en HP

    Pump Dimensions and Weights (Dimension L determined by Pump and Motor)Peso y dimensiones de la bomba (la dimensin L est determinada por la bomba y el motor)

    DISCHARGEDESCARGA

    SUCTIONSUCCIN

    Frame Size JP AB

    P Weight (lbs.)

    Tamao del A B D E F G H

    (Max.)

    bastidor JP (Max.)

    Pesos (libras)

    143 2 41

    145 6 5 6 3 2 2

    18 1132 6

    58 57

    182 2 77 184

    8 578 6 4 3 2 316 1332 778 88

    213 TCZ 2 122 215 TCZ

    9 738 8 5 4 3

    732 1332 958 155 254 TCZ 9 2 265 256 TCZ

    11 9 11

    6 5 3

    1732 11 320

    TCZ indicates west coast fit.

    Packed BoxCaja prensaestopas

    Motor Dimensions and Weights (may vary with manufacturer)* Peso y dimensiones del motor (pueden variar de acuerdo al fabricante) *

    *For use with ANSI class 150 mating flange. All others are NPT connections.* Para uso con brida de contacto ANSI clase 150. Todas las dems son conexiones NTP.

  • 20GOULDS PUMPSCommercial Water

    3756 S-Group Dimensions and WeightsGrupo S, modelo 3756 - Peso y dimensiones

    NOTE:All pumps shipped in vertical discharge position. May be rotated in 90 increments. Tighten casing bolts to 25 ft./lbs. torque.

    Dimensions in inches, weights in lbs. Do not use for construction purposes.

    NOTA:Todas las bombas se embarcan con la descarga en posicin vertical. Esta posicin puede rotarse en incrementos de 90. Ajustar los pernos de la carcasa a una torsin de 25 pies/libras.

    Dimensiones en pulgadas, peso en libras. No utilizar para fines de construccin.

    Pump Suction Discharge

    DC

    Wt.(lbs.)

    Bomba Succin Descarga CP

    Max. DD L R W X Y Z Pesos (libras)

    1 x 2 7 3 418 5 3 4 84 1 x 2 8 1 16 4 4 8 1

    116 31516 5 3316 4 84 1 x 2 6 2 3 4 3 66 1 x 2 8 1 16 538 458

    7

    1 4 5

    258 4 86 2 x 3 7 3 2 1678 518 4 818 11316 3 4 81

    3 x 4 7 4* 3* 16 5 518 7 3 4

    38 6 2 4 114

    *For use with ANSI class 150 mating flange. All others are NPT connections.* Para uso con brida de contacto ANSI clase 150. Todas las dems son conexiones NTP.

    Z R DISCHARGEDESCARGA

    SUCTIONSUCCIN

    " NPT

    X

    2 L

    7

    5

    2 56

    4 HOLES4 ORIFICIOS

    716 DIA.

    KEYWAYCHAVETERO

    x 18

    Y W

    3

    1.1251.124 DIA.

    DCMAX

    DD

    Pump Dimensions and Weights (Dimension L determined by Pump and Motor)Peso y dimensiones de la bomba (la dimensin L est determinada por la bomba y el motor)

    CP

    Mechanical SealSello mecnico

  • 21GOULDS PUMPSCommercial Water

    3756 S-Group Dimensions and WeightsGrupo S, modelo 3756 - Peso y dimensiones

    NOTE:All pumps shipped in vertical discharge position. May be rotated in 90 increments. Tighten casing bolts to 25 ft./lbs. torque.

    Dimensions in inches, weights in lbs. Do not use for construction purposes.

    NOTA:Todas las bombas se embarcan con la descarga en posicin vertical. Esta posicin puede rotarse en incrementos de 90. Ajustar los pernos de la carcasa a una torsin de 25 pies/libras.

    Dimensiones en pulgadas, peso en libras. No utilizar para fines de construccin.

    Pump Suction Discharge

    DC

    Wt.(lbs.)

    Bomba Succin Descarga CP

    Max. DD L R W X Y Z Pesos (libras)

    1 x 2 7 3 7316 5 3 4 84 1 x 2 8 1 19

    716 4 4 11116 1

    116 7 5 3316 4 84 1 x 2 6 2 3 4 3 66 1 x 2 8 1 19

    916 538 458 101316

    1

    7516 5

    258 4 86 2 x 3 7 3 2 191516 518 4 11316 11316 3 4 81

    3 x 4 7 4* 3* 19916 5 518 101316 3 7

    716 6 2 4 114

    *For use with ANSI class 150 mating flange. All others are NPT connections.* Para uso con brida de contacto ANSI clase 150. Todas las dems son conexiones NTP.

    Z R DISCHARGEDESCARGA

    SUCTIONSUCCIN

    " NPT

    X

    2 L

    7

    5

    2 56

    4 HOLES4 ORIFICIOS

    716 DIA.

    KEYWAYCHAVETERO

    x 18

    Y W

    3

    1.1251.124 DIA.

    DCMAX

    DD

    Pump Dimensions and Weights (Dimension L determined by Pump and Motor)Peso y dimensiones de la bomba (la dimensin L est determinada por la bomba y el motor)

    CP

    Packed BoxCaja prensaestopas

  • 22GOULDS PUMPSCommercial Water

    Wt.(lbs.) Motor Frame Size, Tamao del bastidor Pump Suction Discharge CP DC DD R W X Y Z Pesos 140 / 180 210 250 / 280 Bomba Succin Descarga Max. Max. (libras) HL 1 x 2 7

    1 1638 3 418 5 3 4 84

    1 x 2 8 2 4 4 1

    116 31516 5 3316 4 84 1 x 2 6

    1 16 3 4 3 66 9 7

    1 x 2 8 538 1 4 5 2

    58 4 86 2 x 3 7 3 2 1678 518 4 11316 6

    3 4 81 958 818 4

    38

    3 x 4 7 4* 3* 16 5 518 3 438 2 4 114 9 7 7

    3756 S-Group Dimensions and WeightsGrupo S, modelo 3756 - Peso y dimensiones

    Bedplate Dimensions and Weights, Pesos y dimensiones de la place de asiento Motor Frame Motor Bearing Frame Weight (lbs.) Bastidor HA HB HD HE HF HG HP* Shim Shim Cua del Pesos del motor Cua marco de cojinetes (libras)

    143 T 145 T

    1

    182 T 10 28 8 3 24 2 48

    184 T

    213 T 215 T

    12 31 8 4 29 3 1 65

    254 T 256 T

    13 42 9 5 38 4 1

    1 110

    284 TS/T 15 44 10 5 40 3 1 124

    * HP Dimension at Motor end only. * Dimensin HP al extremo del motor nicamente.

    Z R

    X

    ABMAX

    HE HE

    HA

    DD

    " NPT HF

    HB

    HP

    4 HOLES58 DIA.

    4 ORIFICIOS

    P MAX

    3

    3

    CP

    YSINGLE PHASE

    ONLY

    DCMAX

    1.1251.124

    HD

    HG

    W

    HL

    C MAX

    (Motor End Only)(Extremo del motor nicamente)

    DIA.

    DISCHARGEDESCARGA

    SUCTIONSUCCIN

    NOTE:1. All pumps shipped in vertical discharge position. May be rotated in 90 increments. Tighten casing bolts to 25 ft./lbs. torque.

    2. Dimensions in inches, weights in lbs. Do not use for con-struction purposes.3. Motor dimensions and weights very with manufacturer.

    NOTA:1. Todas las bombas se embarcan con la descarga en posicin ver-tical. Esta posicin puede rotarse en incrementos de 90. Ajustar los pernos de la carcasa a una torsin de 25 pies/libras.2. Dimensiones en pulgadas, peso en libras. No utilizar para fines de construccin.3. Las dimensiones y el peso de los motores varan de acuerdo al fabricante.

    Motor Frame 3500 RPM 1750 RPM Wt. (lbs.) Bastidor 1 Phase 3 Phase 1 Phase 3 Phase

    AB C P Pesos

    del motor ODP TEFC ODP TEFC ODP TEFC ODP TEFC Max. Max. Max.

    (libras)

    143 T ,1,1 ,1,1 ,1,1 ,1,1 , , ,,1 ,,1 5

    1338 5 45

    145 T 2 2 2,3 2,3 1,1 1,1 1,2 1,2 14 53 182 T 3 3 5 3 2 2,3 3 3

    578 1658 578

    74 184 T 5 3,5 7 5 3 5 5 1818 95 213 T 7 10 7 5 7 7 738

    18 738 116

    215 T 10 15 10,15 1918 136 254 T 20

    1018 2158 1018

    266 256 T 25 20,25 2338 264 284 TS/T 30 25 1258 2478 15 392

    SPACER COUPLING, ACOPLAMIENTO ESPACIADORCOUPLING GUARD, PROTECTOR DE ACOPLAMIENTO

    Motor Dimensions and Weights, Peso y dimensiones del motor

    *For use with ANSI class 150 mating flange. All others are NPT connections.* Para uso con brida de contacto ANSI clase 150. Todas las dems son conexiones NTP.

    KEYWAYCHAVETERO

    18 x

    MONOFSICO SOLAMENTE

    Mechanical SealSello mecnico

    Pump Dimensions and Weights (Dimension HL determined by Pump and Motor)Peso y dimensiones de la bomba (la dimensin HL est determinada por la bomba y el motor)

  • 23GOULDS PUMPSCommercial Water

    Motor Frame 3500 RPM 1750 RPM Wt. (lbs.) Bastidor 1 Phase 3 Phase 1 Phase 3 Phase

    AB C P Pesos

    del motor ODP TEFC ODP TEFC ODP TEFC ODP TEFC Max. Max. Max.

    (libras)

    143 T ,1,1 ,1,1 ,1,1 ,1,1 , , ,,1 ,,1 5

    1338 5 45

    145 T 2 2 2,3 2,3 1,1 1,1 1,2 1,2 14 53 182 T 3 3 5 3 2 2,3 3 3

    578 1658 578

    74 184 T 5 3,5 7 5 3 5 5 1818 95 213 T 7 10 7 5 7 7 738

    18 738 116

    215 T 10 15 10,15 1918 136 254 T 20

    1018 2158 1018

    266 256 T 25 20,25 2338 264 284 TS/T 30 25 1258 2478 15 392

    Wt.(lbs.) Motor Frame Size, Tamao del bastidor Pump Suction Discharge CP DC DD R W X Y Z Pesos 140 / 180 210 250 / 280 Bomba Succin Descarga Max. Max. (libras) HL 1 x 2 7

    1 19716 3 7316 5 3 4 84

    1 x 2 8 2 4 4 1

    116 7 5 3316 4 84 1 x 2 6

    1 19916 3 4 3 66 12

    516 101316 1 x 2 8 538

    1 7516 5 258

    4 86 2 x 3 7 3 2 191516 518 4 11316 6

    3 4 81 121116 11316 7

    716

    3 x 4 7 4* 3* 19916 5 518 3 7716 2 4 114 12

    516 101316 10

    116

    3756 S-Group Dimensions and WeightsGrupo S, modelo 3756 - Peso y dimensiones

    Motor Frame Motor Bearing Frame Weight (lbs.) Bastidor HA HB HD HE HF HG HP* Shim Shim Cua del Pesos del motor Cua marco de cojinetes (libras)

    143 T 145 T

    1

    182 T 10 28 8 3 24 2 48

    184 T

    213 T 215 T

    12 31 8 4 29 3 1 65

    254 T 256 T

    13 42 9 5 38 4 1

    1 110

    284 TS/T 15 44 10 5 40 3 1 124

    * HP Dimension at Motor end only. * Dimensin HP al extremo del motor nicamente.

    Z R

    X

    ABMAX

    HE HE

    HA

    DD

    " NPT HF

    HB

    HP

    4 HOLES58 DIA.

    4 ORIFICIOS

    P MAX

    3

    3

    CP

    YSINGLE PHASE

    ONLY

    DCMAX

    1.1251.124

    HD

    HG

    W

    HL

    C MAX

    (Motor End Only)(Extremo del motor nicamente)

    DIA.

    DISCHARGEDESCARGA

    SUCTIONSUCCIN

    NOTE:1. All pumps shipped in vertical discharge position. May be rotated in 90 increments. Tighten casing bolts to 25 ft./lbs. torque.

    2. Dimensions in inches, weights in lbs. Do not use for con-struction purposes.3. Motor dimensions and weights very with manufacturer.

    NOTA:1. Todas las bombas se embarcan con la descarga en posicin ver-tical. Esta posicin puede rotarse en incrementos de 90. Ajustar los pernos de la carcasa a una torsin de 25 pies/libras.2. Dimensiones en pulgadas, peso en libras. No utilizar para fines de construccin.3. Las dimensiones y el peso de los motores varan de acuerdo al fabricante.

    SPACER COUPLING, ACOPLAMIENTO ESPACIADORCOUPLING GUARD, PROTECTOR DE ACOPLAMIENTO

    Bedplate Dimensions and Weights, Pesos y dimensiones de la place de asiento

    Motor Dimensions and Weights, Peso y dimensiones del motor

    *For use with ANSI class 150 mating flange. All others are NPT connections.* Para uso con brida de contacto ANSI clase 150. Todas las dems son conexiones NTP.

    KEYWAYCHAVETERO

    18 x

    MONOFSICO SOLAMENTE

    Packed BoxCaja prensaestopas

    Pump Dimensions and Weights (Dimension HL determined by Pump and Motor)Peso y dimensiones de la bomba (la dimensin HL est determinada por la bomba y el motor)

  • Specifications

    Capacities to: 550 GPM (125 m3/hr) at 3500 RPM350 GPM (79 m3/hr) at 1750 RPM

    Heads to: 280 feet TDH (85 m) at 3500 RPM67 feet TDH (20 m) at 1750 RPM

    Working pressure to: 175 PSIG (12 bars)

    Suction pressure to:100 PSIG (7 bars)

    Maximum temperature to:212F (100C) with standard seal or 250F (121C) with optional seal.

    Motor: NEMA standard JM frame or JP frame for 3656 or T-frame for 3756. Open drip-proof, totally enclosed fan cooled and explosion proof enclosures available. Single phase (115/208 230 V), to 3 HP (208 230 V) 5 HP and (230V only) on 7, 10 HP. Three phase (208 230/460 V) standard note that 20 and 25 HP are (230/460 V).

    Direction of Rotation: Clockwise viewed from motor end.

    Typical Applications

    Booster service

    Spraying systems

    Irrigation

    Water circulation

    Liquid transfer

    General purpose pumping

    Especificaciones

    Capacidad hasta:550 GPM (125 m 3/hr) a 3500 RPM350 GPM (79 m 3/hr) a 1750 RPM

    Cargas hasta:280 pies (85 m) carga dinmica total a 3500 RPM67 pies (20 m) carga dinmica total a 1750 RPM

    Presin de operacin hasta:175 PSIG (12 bars)

    Presin de succin hasta:100 PSIG (7 bars)

    Temperatura mxima:212 F (100 C) con sello estndar o 250 F (121 C) con sello optativo.

    Motor:Bastidor NEMA JM estndar en el mo-delo 3656 y bastidor NEMA T estndar en el modelo 3756. Las cubiertas disponibles son: abierta a prueba de filtracin, totalmente encerrada con enfriamiento por ventilador y a prueba de explosiones. Monofsico (115/208 230 V), a 3 HP; (208 230 V) 5 HP y (230 V solamente) 7 a 10 HP. Trifsico (208 230/460 V) estndar. Los motores de 20 a 25 HP son de 230/460 V.

    Direccin de rotacin:Dextrorsa (sentido de las agujas del reloj) cuando se mira desde el extremo del motor.

    Aplicaciones tpicas

    Servicio de refuerzo

    Sistemas de rociado

    Sistemas de riego

    Circulacin de agua

    Transferencia de lquidos

    Aplicaciones de bombeo en general

    ITT 2881 East Bayard Street, Seneca Falls, NY 13148Phone: (315) 568-7123 Fax: (315) 568-7973www.goulds.com

    Goulds Pumps is a registered trademark of ITT Corporation. ITT, the Engineered Blocks Symbol and Engineered for Life are registered trademarks of ITT Manufacturing Enterprises, Inc.

    Goulds Pumps es una marca registrada de ITT Corporation. El ITT, el smbolo ITT Engineered Blocks y Engineered for Life es marcas registradas de ITT Manufacturing Enterprises, Inc.

    Copyright 2010 ITT Corporation B363756S July (Julio), 2010 Printed in U.S.A. (Impreso en los E.E.U.U.)SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. (LAS ESPECIFICACIONES ESTN SUJETAS A CAMBIO SIN PREVIO AVISO.) Engineered for life

    ITT