basic statistics ii
TRANSCRIPT
04/07/2023 08:23 PM Mr N S Rathnayaka 1
Reading a Histogram
Example 9. The following histogram shows the monthly wages (in rupees) of workers in a factory
Let us explain it with the help of an example
04/07/2023 08:23 PM Mr N S Rathnayaka 2
i. Find the maximum number of workers getting a wage.ii. Find the least wage and highest wage with no. of workers
earning themiii. How many workers get a monthly wage of Rs. 8000 or
less ?
04/07/2023 08:23 PM Mr N S Rathnayaka 3
iii. 50 workers get a wage of Rs 8000 or less asRs (4000 – 5000) – 4 workersRs (5000 – 6000) – 10 workersRs (6000 – 7000) – 12 workersRs (7000 – 8000) – 24 workersTotal – 50
ii. The least wage is between Rs (4000 – 5000) and 4 workers are getting that. The corresponding figures for highest wage are Rs (9000 – 10000) and four workers get that
i. The maximum number of workers is 25 getting wages between Rs (7000 – 8000).
Solution :
04/07/2023 08:23 PM Mr N S Rathnayaka 4
iv. What is a cumulative frequency (Ogive)?
The cumulative frequency, also known as an Ogive, is another way to analyze the frequency distribution table. Unlike a frequency distribution which tells you how many data points are within each class, a cumulative frequency tells you how many are less than or within each of the class limits.
04/07/2023 08:23 PM Mr N S Rathnayaka 5
Compute the cumulative frequency /Ogives for the following data:
Example -10
04/07/2023 08:23 PM Mr N S Rathnayaka 6
Frequency distribution table with cumulative frequency (Ogive)
04/07/2023 08:23 PM Mr N S Rathnayaka 7
0 1 2 3 4 5 6 70
5
10
15
20
25
30
cumulative distribution chart
Series1
Class number
umila
tive
Freq
uenc
y
04/07/2023 08:23 PM Mr N S Rathnayaka 8
Draw a ogive curve for the following data:
Example-11
Marks Frequency Ogive
0-10 2
10-20 8
20-30 12
30-40 18
40-50 28
50-60 22
60-70 6
70-80 4
04/07/2023 08:23 PM Mr N S Rathnayaka 9
Marks Frequency Cumulative Frequency
0-10 2 2
10-20 8 10
20-30 12 22
30-40 18 40
40-50 28 68
50-60 22 90
60-70 6 96
70-80 4 100
Solution
04/07/2023 08:23 PM Mr N S Rathnayaka 10
i. We plot the points with coordinates having abscissae as actual limits and ordinates as the cumulative frequencies, (10, 2), (20, 10), (30, 22), (40, 40), (50, 68), (60, 90), (70, 96) and (80, 100) are the coordinates of the points.
ii. Join the points plotted by a smooth curve.
iii. An Ogive is connected to a point on the X-axis representing the actual lower limit of the first class.
04/07/2023 08:23 PM Mr N S Rathnayaka 11
X -axis 1 cm = 10 marks, Y -axis 1cm = 10 c.f.
04/07/2023 08:23 PM Mr N S Rathnayaka 12
Using the data given below, construct a cumulative frequency table and draw the Ogive.
Example- 12
04/07/2023 08:23 PM Mr N S Rathnayaka 13
cumulative frequency table
04/07/2023 08:23 PM Mr N S Rathnayaka 14
To Plot an Ogive
iii. An Ogive is connected to a point on the X-axis representing the actual upper limit of the last class [in this case) i.e., point (80.5, 0)].
i. We plot the points with coordinates having abscissae as actual lower limits and ordinates as the cumulative frequencies, (70.5, 2), (60.5, 7), (50.5, 13), (40.5, 23), (30.5, 37), (20.5, 49), (10.5, 57), (0.5, 60) are the coordinates of the points.
ii. Join the points by a smooth curve.
04/07/2023 08:23 PM Mr N S Rathnayaka 15
X-axis 1 cm = 10 marksY-axis 2 cm = 10 c.f
04/07/2023 08:23 PM Mr N S Rathnayaka 16
http://www.nos.org/Secmathcour/eng/ch-28.pdf
www.pdfchm.com www.chmpdf.com
04/07/2023 08:23 PM Mr N S Rathnayaka 17
Pie Diagram or Pie Chart
It is also known as angular diagram. It is used to represent percentage break downs of the given data. For example, the exports of a country to different countries and continents of the world can be expressed into ratios or percentages.
These ratios or percentages can then be converted into angles by the formula
04/07/2023 08:23 PM Mr N S Rathnayaka 18
Steps in the construction of Pie diagram
i. Find the total of all components.
ii. Find ratio or percentage of the share of sub-division to the total and multiply by 360° to get the angle corresponding to each sub-division.
iii. Draw a circle of a suitable size.
iv. Use protractor to draw different angles at the centre. Preferably start with the largest one.
v. Shade the different segments with different colours or shades.
vi. Write the components with percentage values in the marked, shaded or coloured areas.
04/07/2023 08:23 PM Mr N S Rathnayaka 19
Example-11
04/07/2023 08:23 PM Mr N S Rathnayaka 20
04/07/2023 08:23 PM Mr N S Rathnayaka 21
Draw the Pie diagram for the following data
Country Area (km²) Pre Ang
Austria 83858
Denmark 43094
Finland 336593
Germany 357022
Greece 131940
Italy 301230
Sweden 449964
United Kingdom 244820
Total 100 360
Example-12
04/07/2023 08:23 PM Mr N S Rathnayaka 22
Country Area (km²) Percentage (100%) Degree
Austria 83858 4.30 15.49
Denmark 43094 2.21 7.96
Finland 336593 17.27 2.19
Germany 357022 18.32 65.96
Greece 131940 6.77 24.38
Italy 301230 15.46 55.65
Sweden 449964 23.09 83.13
United Kingdom 244820 12.56 45.23
Total 1948521 100 360
04/07/2023 08:23 PM Mr N S Rathnayaka 23
4%2%
17%
18%
7%15%
23%
13%
Pie diagram of representing the area
12345678
04/07/2023 08:23 PM Mr N S Rathnayaka 24
Introduction to Statistics