barton engineering brochure

Engineering

Premium Quality Solutions for Cable Management

Protection - Steel Conduit (US Spec)and

BARTON EMT

BARTON IMC

BARTON RMC

BARTON RMC-P

Electrical Metallic Tubing

Intermediate Metal Conduit

Rigid Metal Conduit

UPVC Coated Rigid Metal Conduit

Genuine Barton

Genuine Quality

Genuine Reputation

Accept Nothing Less

BARTON EMT is the most cost effective premium

quality conduit solution where light weight and

maximum wire carrying capacity are important

factors in the electrical cable protection system.

BARTON EMT is manufactured to tight tolerances

on modern and efficient tube rolling mills to

consistently high standards.

BARTON steel conduit is easily installed, reused,

recycled and modified. It provides excellent

strength to weight and long lasting resistance

against corrosion in the most extreme of

applications.

BARTON products are backed by a fast, reliable

and comprehensive local service.

�

�

�

�

�

�

�

Outside Diameter Tolerance

Nom Trade Size up to 2” 0.005” ( 0.13mm)

Nom Trade Size ” 0.010” ( 0.25mm)

Nom Trade Size 3” 0.015” ( 0.38mm)

Length Tolerance 0.125” ( 6.35mm)

Max height of internal weld bead 0.3mm

+ +

+ +

+ +

+ +

2½

Nom Trade Size 3½ to 4” 0.020” ( 0.51mm)

Pre Galv zinc (alternative finishes upon request)

Both ends plain finish (no threads)

Couplers available separately

Master bundle information is nominal

+ +

Quality, Environment and Service Specifications

Ordering information

� Thin walled unthreaded ductile steel conduit tube

Manufactured from Pre Galvanised flat rolled high grade steel

Supplied in 10’ (3.05m) lengths without couplers

Connected using clamp-type fittings

Underwriters Laboratory UL797

American National Standard Institute ANSI C80.3

High wire carrying capacity, easy to bend and install

Excellent resistance to extreme temperatures and environments.

Does not burn or produce harmful gases.

�

�

�

�

�

�

�

�

EMT – sustainable Electrical Metallic TubingHigh capacity, lightweight steel conduit tube for optimal protection

�

�

�

�

�

�



Nom Trade Size 1¼ to 2” 0.015” ( 0.38mm)

Nom Trade Size 2½ to 4” 0.020” ( 0.51mm)


Max height of internal weld bead 0.3mm

HDG (alternative finishes upon request)

Both ends with NPT threads, one end

fitted with a coupler, the other with a plastic

protection cap.


+ +

+ +

+ +

+ +

BARTON IMC is a cost effective premium quality

alternative to BARTON EMT and RMC where a balance

between weight and strength is a key design factor.

BARTON IMC is manufactured to tight tolerances on

modern and efficient tube mills. It is hot dipped

galvanised (bore and outside diameter) after

manufacturing for maximum resistance against

corrosion.

BARTON steel conduit can be recycled, reused,

modified and installed with ease. Steel has excellent

strength to weight, superior fire resistance properties

and is durable in extreme environments

BARTON products are backed by a fast, reliable and

comprehensive local service.

�

�

�

�

�

�

�

�

�

Thin walled, high strength, threaded ductile steel conduit tube

Hot dipped galvanised after manufacture for maximum protection

Supplied in 10’ (3.05m) lengths fitted with coupler at one end

Connected using clamp-type and NPT threaded fittings



Excellent resistance to extreme temperatures and corrosive

environments.


Alternative lengths are available on request

IMC – sustainable Intermediate Metal ConduitThin wall, highly corrosion resistant steel conduit for cable systems




BARTON RMC provides maximum strength and a wire

carrying capacity up to 6” dia.

BARTON RMC is produced to high standards and hot

dipped galvanised (bore and outside diameter) after

manufacturing for maximum resistance against

corrosion.

BARTON steel conduit is easily installed, modified,

reused & recycled. With excellent strength and superior

fire resistance properties, it performs in the most

demanding of applications.

BARTON products are backed by a fast, reliable and

comprehensive local service.

�

�

�

�

�

�



Nom Trade Size 2 to 4” 0.025” ( 0.64mm)

Nom Trade Size 5 to 6” 1%


Internal bead is removed

HDG (alternative finishes upon request)

Both ends with NPT threads, one end fitted

with a coupler, the other with a plastic

protection cap.


+ +

+ +

+

+ +

½


�

�

�

�

�

�

�

�

�

Thick walled, maximum strength threaded ductile steel conduit tube


Supplied in 10’ (3.05m) lengths complete with coupler one end




Excellent resistance to extreme temperatures and corrosive

environments.



RMC – sustainable Rigid Metal ConduitThick walled, highly corrosion resistant steel conduit for cable systems

BARTON PVC coated RMC provides the ultimate

levels of protection against corrosion, maximum

mechanical strength and an ultra high capacity (up

to 6” dia) steel conduit solution, suitable for use in

hazardous areas.

A Polyurethane (PU) interior coating and a PVC

external coating is applied to the hot dipped

galvanised BARTON RMC.

PVC coated RMC has all the advantages of steel

conduit and in addition protects conductors from

harsh corrosive attacks.

�

�

�

�

�

�

�

�



Nom Trade Size 2 to 4” 0.025” ( 0.64mm)

Nom Trade Size 5 to 6” 1%


Internal bead is removed

HDG

Both ends with NPT threads and end plastic caps

Couplers available separately.

+ +

+ +

+

+ +

½

”

PVC external coating thickness 1 mm

PU internal coating 50

Quality and Service Specifications

�m


�

�

�

�

�

�

�

�

Thick walled, maximum strength threaded ductile steel conduit tube


with PVC external coating and PU internal coating

Supplied in 10’ (3.05m) lengths complete with coupler one end




Designed to protect & route electrical wiring from aggressive

mechanical damage and corrosive attack.


RMC-P – UPVC Coated Rigid Metal ConduitThick walled, high strength conduit for highly corrosive applications

�

�

A full range of clamp-type and compression fittings

Fully compatible with Barton EMT Conduit Tube

Manufactured from steel,

with a zinc plated finish

Compression type

Set screw type

Used to join EMT conduit

to a box or enclosure

Compression type

Set screw type

Used to join two lengths

of EMT conduit

45 degree

90 degree

Used where the EMT

conduit run turns through

45 or 90 degrees.

Full saddle (twin hole fixing)

Half saddle (one hole fixing)

Used to install EMT

conduit lengths.

EMT Connector

EMT Coupling

EMT Elbow

EMT Saddle

BARTON EMT fittings

Nom Trade Size

EMT Fittings and accessories

Connector Coupling

mm Set Screw Compression Set Screw CompressionInch

½

¾

1

1¼

1½

2

2½

3

3½

4

16

20

27

35

41

53

63

78

91

103

E201050

E201075

E201100

E201125

E201150

E201200

E201250

E201300

E201350

E201400

E203050

E203075

E203100

E203125

E203150

E203200

E203250

E203300

E203350

E203400

E205050

E205075

E205100

E205125

E205150

E205200

E205250

E205300

E205350

E205400

E207050

E207075

E207100

E207125

E207150

E207200

E207250

E207300

E207350

E207400

EMT Fittings and accessories

Nom Trade Size

Elbow Saddle

Inch

½

¾

1

1¼

1½

2

2½

3

3½

4

mm

16

20

27

35

41

53

63

78

91

103

45 degree

E209050

E209075

E209100

E209125

E209150

E209200

E209250

E209300

E209350

E209400

90 degree

E211050

E211075

E211100

E211125

E211150

E211200

E211250

E211300

E211350

E211400

Half

E214050

E214075

E214100

E214125

E214150

E214200

E214250

E214300

E214350

E214400

Full

E216050

E216075

E216100

E216125

E216150

E216200

E216250

E216300

E216350

E216400

Accessories and fittings for use with

BARTON EMT Conduit Tube


The fittings shown on this page are a selection from the full range. Additional items available upon request.

�

�

A full range of NPT threaded fittings

Fully compatible with Barton IMC and RMC

BARTON IMC/RMC fittings

Nom Trade Size

IMC/RMC Fittings and accessories

Connector

Compression Compression 45 degree 90 degreeRigidmm

mm

Inch

Inch

16

20

27

35

41

53

63

78

91

½

¾

1

1¼

1½

2

2½

3

3½

4

5

6

103

129

155

16

20

27

35

41

53

63

½

¾

1

1¼

1½

2

2½

6 155

R203050

R203075

R203100

R203125

R203150

R203200

R203250

R203300

R203350

R203400

R203550

R203600

R207050

R207075

R207100

R207125

R207150

R207200

R207250

R207300

R207350

R207400

R207550

R207600

R209050

R209075

R209100

R209125

R209150

R209200

R209250

R209300

R209350

R209400

R209550

R209600

R211050

R2 07511

R211100

R211125

R211150

R211200

R211250

R211300

R211350

R211400

R211550

R211600

R205050

R205075

R205100

R205125

R205150

R205200

R205250

R205300

R205350

R205400

R205550

R205600

Nom Trade Size

IMC/RMC Fittings and accessories

Saddle Nipple Locknut Hanger

Coupling Elbow

Half

E214050

E214075

E214100

E214125

E214150

E214200

E214250

E214600

Full

R218050

R218075

R218100

R218125

R218150

R218200

R218250

R218600

Bushed

R220050

R2 07520

R220100

R220125

R220150

R220200

R220250

R220600

Rigid

R222050

R 075222

R222100

R222125

R222150

R222200

R222250

R222600

R224050

R 075224

R224100

R224125

R224150

R224200

R224250

R224600

E216050

E216075

E216100

E216125

E216150

E216200

E216250

783 E214300 R218300 R220300 R222300 R224300E216300

913½ E214350 R218350 R220350 R222350 R224350E216350

4 103 E214400 R218400 R220400 R222400 R224400E216400

5 129 E214550 R218550 R220550 R222550 R224550E216550

E216600

Manufactured from steel,

with a zinc plated finish

Compression type

Used to join a plain end of

IMC/RMC conduit to a box

or enclosure

Compression type

Threaded type

Used to join two lengths

of IMC/RMC.

45 degree

90 degree

Used where the IMC/RMC

conduit run turns through

45 or 90 degrees.

Full saddle (twin hole fixing)

Half saddle (one hole fixing)

Used to install IMC/RMC

conduit lengths.

A wide range of accessories

to allow swift installation

IMC/RMC Connector

IMC/RMC Coupling

IMC/RMC Elbow

IMC/RMC Saddle

IMC/RMC nipples, locknuts

and hangers


Accessories and fittings for use with

BARTON IMC and RMC conduit tube

The fittings shown on this page are a selection from the full range. Additional items available upon request.

Cable Management and Protection Conduit

(US specification)

Please contact us on:

Caparo (GCC)

Jebel Ali Free Zone

PO BOX 17241

Dubai. UAE

E:

T: +971 4 8831808

F: +971 4 8831638

W:

[email protected]

www.caparogcc.com

Popes Lane

Oldbury

West Midlands,

B69 4PF

W:

Barton Engineering

United Kingdom

www.caparo.com

Genuine Barton

Genuine Quality

Genuine Reputation

Accept Nothing Less

From its base in the West Midlands, England, BARTON Engineering has successfully supplied premium qualify

cable management products for over 90 years and the market leading range has established an excellent

reputation for providing the highest levels of quality and value.

The BARTON range includes BS4568/50086/61386 conduit tube and accessories, flexible conduit, trunking,

cable tray, switch and socket boxes and electrical enclosures (in galvanised and stainless steel). BARTON

products are installed in the most demanding of applications and environments including airports, schools,

malls, hospitals, tunnels, stadiums, tall and super tall buildings, hotels and places of worship.

BARTON Engineering is part of the Caparo Group, a global association of manufacturing and engineering

businesses founded in 1968 by Lord Paul of Marylebone. Caparo interests include the design, manufacture

and marketing of steel, automotive and general engineering products, including materials testing. The Caparo

Group is wholly owned and controlled by the Paul family from its headquarters in London, UK.

Please visit www.caparo.com

Established in 2005 in the Jebel Ali Free Zone, Caparo (GCC) is the exclusive BARTON service agent throughout

the Middle East and North Africa region. A highly focussed service centre in Jebel Ali provides customers with

stock, logistics, technical and sales support for the entire BARTON range. All orders, transactions and product

information is provided in good faith and is subject to our Terms of Trading, which may be obtained upon

request.

barton engineering brochure

Documents