ayman s. mosalllam, ph..d., p.ee. - curee homepage ayman - cv.pdf · ayman s. mosalllam, ph..d.,...

EEDDUUCCAATTIIOONN Ph.D., Structural Engineering, The Catholic University of America, Washington,

D.C., October 1990. (GPA 3.89/4.00) M.C.E., Civil Engineering, The Catholic University of America, Washington, DC May

1985 (GPA 4.00/4.00). B.Sc., Civil Engineering, Cairo University, Egypt, July 1978. Received the Honor of

"Distinction". Class Rank 6/489. PPRROOFFEESSSSIIOONNAALL RREEGGIISSTTRRAATTIIOONN Registered Professional Structural Engineer. AAWWAARRDDSS && HHOONNOORRSS

Received Outstanding Research Award, The 14th International Conference of Composites Engineering (ICCE-14), Boulder, Colorado, 2006,

Appointed as an Advisory Board Member of the International Accreditation Service (IAS), a Subdivision of the International Code Council (ICC), 2005,

Recipient of the Distinguished Engineering Educator of the Year Award, ASCE Orange County Chapter, 2001,

Listed in Who's Who in America, 55th Edition, 2000,

University Address: Civil & Environmental Engineering Department

University of California, Irvine Irvine, California 92697-2175

Phone: 949-824-3369 Cell: 714-767-4564 Fax: 714-278-4150

E-mail: [email protected] http://www.eng.uci.edu/user/285

AAAYYYMMMAAANNN SSS... MMMOOOSSSAAALLLLLLAAAMMM,,, PPPhhh...DDD...,,, PPP...EEE...

Mosallam’s Resume 2006 of 30

Recipient of Plaque of Recognition form the International Concrete Repair Institute (ICRI) for Recognition of Contributions in the field of Concrete Repair, 2000.

Recipient of Plaque of Recognition form King Saud University, Riyadh, Saudi Arabia, 2000.

Recipient of Award of Excellence, Mentor Program, California State University, Fullerton, 1999.

Recipient of the Faculty Research Achievement Award from the School of Engineering and Computer Science, California State University, Fullerton, 1998,

Listed in Who's Who in Technology (7th Edition, 1996/1997). Recipient of the Certificate of Honor the Egyptian Society of Engineers for

contribution in research and performance as the International Co-Chairman of the First Middle East Workshop on Structural Composites, Sharm El-Shiekh, Egypt, 1996.

Recipient of the Certificate of Recognition of Outstanding Research Contributions from the International Community of Composite Engineering, 1996.

Recipient of Best Design Paper Award from the Composites Institute, 1995. Recipient of the Best Design Paper Award from the Composite Institute 1992, Recipient of the Best Innovation Paper Award from Plastics World Magazine, 1992, Recipient of the Overall Paper Award from McGraw-Hill Publishing Co. 1992, Recipient of the Peace Fellowship for Master's Degree in Civil Engineering, 1983.

CCOOUURRSSEESS AANNDD TTEEAACCHHIINNGG EEXXPPEERRIIEENNCCEE Seismic Design of Bridges Mechanical Vibrations Structural Dynamics Reinforced Concrete Design Theory of Elastic Stability Design of Steel Structures Theory of Elasticity Theory of Structures I & II Advanced Mechanics of Solids Bridge Design Advanced Design of R/C Structures Experimental Mechanics Composite Structures Expert Systems in Construction Theory of Plates and Shells Mechanics of Composites Static and Dynamics Mechanics of Solids R/C and Prestressed Concrete Lab Fracture Mechanics Engineering Mathematics Matrix Analysis of Structures Design of Concrete Structures with FRP Functional Analysis

PPEENNDDIINNGG PPAATTEENNTTSS::

1- Polymer Composite Continuous Universal Connectors (Pending: # 60-166,768) 2- Honeycomb Composite System for Repair & Rehabilitation (Pending: # 60-146,830) 3- Pre-cured Laminates For Repair and Rehabilitation (Pending: # 60-205,609) 4- Prestressed and Post-tensioned Composite Bridge Decks (Pending: # 60-214,682)


AACCAADDEEMMIICC && RREESSEEAARRCCHH EEXXPPEERRIIEENNCCEE 2004-Present Professor in Residence and Interim Director of the Structural Engineering Testing Hall (SETH), Civil and Environmental Engineering Department, University of California, Irvine, California. Duties include developing externally funded research projects and advising both undergraduate and graduate research students and generating sponsored research program from both governmental and private organizations. The main focus of the research is in advanced structural systems, seismic repair and rehabilitation of structures, health monitoring and smart structural systems. Currently involved in several sponsored research programs dealing with innovative structural systems. The first research project involved both analytical and experimental evaluation of scarifying impact protection system for reinforced concrete highway bridge girders. The innovative aluminum sandwich system was developed; manufactured and finite element simulation was conducted prior to the full-scale testing which is in progress. The second research project deals with the development of a smart repair kit and Diagnostic/Prognostic System (DPS) that utilize advanced remote sensing methodology to monitor the repaired composite assault bridges. Both virtual and laboratory tests are being conducted. Advanced optical fiber sensors and MEMS will be utilized in developing the smart repair technology for the US Army. Another pioneering testing program focusing on evaluating both the cyclic and quasi-static flexural behavior of recycled plastic piles reinforced with fiber reinforced polymer E-glass/epoxy rebars is underway. 1995- 2003 Director, Structural Repair and Rehabilitation of Structures Center, California State University at Fullerton: Duties include directing research and development activities, with a main focus on performance of new systems for repair and rehabilitation of bridges and other structures. Developing externally funded multidisciplinary research projects. Directs and involves in developing new innovative system, and development of design and materials acceptance criteria for new system with focus on polymer composites for infrastructure applications. Duties also include, advising and directing graduate and undergraduate student research projects. Research Professor, Engineering Division, California State University at Fullerton, Fullerton, California. Duties include teaching graduate and undergraduate structures and mechanics courses for both civil and mechanical engineering students. Supervising and advising graduate and undergraduate research students. Initiating externally funded research projects. Research activities focused on infrastructure applications of polymer composites. Awarded an ASCE grant to write the ASCE Structural Design Manual for Composite Joints. Research activities focused on infrastructure applications of polymer composites for concrete structures. Completed Phase I of an industry-funded project on developing a novel repair system for repair and rehabilitation of steel framing welded connections. A full-scale testing program has been initiated and experimental date has been analyzed and verified using Finite element techniques. Completed an ASCE project in developing the Prestandard Design Documents for Structural Pultruded Structures. Conducted a theoretical study on seismic and


creep behavior of reinforced concrete beam-to-column connections. The project was funded by the National Science Foundation (NSF). A pilot research study on creep and creep rupture of axial and flexural R/C members retrofitted with composite laminates is in progress since 1998. June 1993- July 1995 Associate Professor, Civil, Mechanical and Environmental Engineering Department, George Washington University (GWU), Washington, D.C. Duties include teaching graduate and undergraduate structures and mechanics courses for civil engineering students. Supervising and advising graduate and undergraduate research students. Duties included developing externally funded research projects. Developed and directed several research programs on the structural behavior of polymer composites. A project involving both experimental and theoretical studies on developing test standards for biaxial testing of sandwich plates with aluminum honeycomb core and graphite/epoxy face sheets has been conducted through a funded project by NASA-Goddard Space Flight Center. The experimental work involved uniaxial testing of different composites coupon specimen, as well as developing test fixture and methodology for biaxial testing of composites plates. Conducted theoretical and numerical analysis on the predicting the ultimate behavior of sandwich composite panels. Duties also included teaching advanced courses on mechanics and design of composites materials and systems. These courses were taught as a part of the George Washington University special Master's Program at NASA Goddard Space Center, Greenbelt, Maryland. July 1991- May 1993 Visiting Assistant Professor, Civil, Mechanical and Environmental Engineering Department, George Washington University (GWU). Duties included teaching and developing undergraduate structural analysis and design courses. Initiated and completed several research projects including a full-scale testing program on PFRP frame connections, long-term characterization of pultruded structures under high temperature and humidity environments, internal and external reinforcement of concrete elements using advanced composite plates and rebars. Also, involved in advising both graduate and undergraduate students in the design and materials selection process of the GWU all-composites honeycomb Solar Car. The Solar Car has won the First Place in the International Solar Car Race held in Japan in June 1995.

SSTTUUDDEENNTT SSUUPPEERRVVIISSIIOONN && SSEERRVVIICCEESS

i) The average students evaluation for the past two academic year is 3.85/4.0 (two courses were 4.0/4.0),

ii) Acted as an Advisor and Co-advisor of the following Doctoral and Master’s Thesis:

♦ Mr. R. Miraj – D.Sc., Civil & Mechanical Engineering Department, George Washington University.

♦ Mr. M. El-Mikawai, D.Sc., George Washington University, Washington, D.C.


♦ Mr. A. Nasr, Ph.D., Civil & Environmental Engineering Department, University of California at Irvine.

♦ Mr. A K Mahadevan, MCE, Civil & Environmental Engineering Department, University of California at Irvine.

♦ Mr. K. Allam – Ph.D., Civil & Environmental Engineering Department, University of California at Irvine.

♦ Mr. M. Youssef, Ph.D., Civil & Environmental Engineering Department, University of California at Irvine.

♦ C. Tantayanondkul, MCE, Civil & Environmental Engineering Department, University of California at Irvine.

♦ Mr. E. Lau - MCE, Civil & Environmental Engineering Department, California State University, Fullerton.

♦ Mr. S. Marano - MCE, Civil & Environmental Engineering Department, California State University, Fullerton.

♦ Mr. M. Ibrahim, Civil & Environmental Engineering Department, California State University, Fullerton.

♦ Mr. J. Jahic - MME, Mechanical Engineering Department, California State University, Fullerton.

♦ Mr. D. De Boer - MME, Mechanical Engineering Department, California State University, Fullerton.

♦ Mr. X. Liu – MME, Mechanical Engineering Department, California State University, Fullerton.

♦ Mr. J. Slenk – MME, Mechanical Engineering Department, California State University, Fullerton,

♦ Mr. V. Desai - MME, Mechanical Engineering Department, California State University, Fullerton,

iii) Supervised the following ICE Conference Undergraduate Students Papers:

1- Barrera, C, and Parikh, N. (1998). “Long-term Behavior of Carbon/Epoxy Composite Repair Jackets,” Student Posters Session, 1998 International Composites Expo (ICE), The Composites Institute, Nashville, Tennessee, ICE Program, pp. 36.

2- Lupe, L J., Martrosof, V., and Mekuria, T. (1998). “Study on Creep & Creep Rupture of Glass Laminates Under Bending and Axial Loading Conditions,” 1998 International Composites Expo (ICE), Composites Institute, Nashville, Tennessee, ICE Program, pp. 36-37.

3- Martrosof, V, Mekuria, T., Parikh, N., Barrera, C., and Jurado, L. (1998). “Structural Upgrade of Unreinforced Concrete Members Using E-glass & Carbon/Epoxy Composite Laminates,” 1998 International Composites Expo (ICE), The Composites Institute, Nashville, Tennessee, ICE Program, pp. 37.

iv) Served as the Faculty Advisor for the following three papers. These papers have won the CSUF ‘1998 Research Competition in April and the statewide CSU 1998 Student Research Competition Awards for booth graduate and under graduate categories. - Barrera, C Lupe, L J., Martrosof “Cyclic Behavior of PFRP Interior Joints”


- Lau, E. “Seismic Behavior of R/C Connections Repaired With Polymer Composites”

iv) Acted as the CSUF ACI-FRP Competition team advisor. The competition was held during the American concrete institute (ACI) Conference in October 26, 1998 in Los Angles. Obtained ACI travel grant to cover travel expenses for the competing undergraduate student team.

AAWWAARRDDEEDD aanndd SSUUBBMMIITTTTEEDD RREESSEEAARRCCHH GGRRAANNTTSS:: 1) Awarded Grants: A total of $ 1,979,826 was awarded since December 2001. These grants are: • Cyclic Behavior of Reinforced Concrete Columns Reinforced with FRP Composite

Jackets: $100,000, 8 months, BASF Company. • MRI Grant, $329,156, National Science Foundation (NSF) [CO-P.I.] • Cyclic Behavior of New Class of Anchoring System: $10,000, B. Schmidt Engineers. • Non-Destructive Evaluation of Fiber Reinforced Polymer (FRP) Composite Bridge

Decks: $220,000, expected duration: 24 months, California Department of Transportation (CalTrans), PI with Professor Feng as Co-PI

• Structural Testing of Recycled Plastic Piles $6,000, 1.5 months, Plastic Pilings Incorporated (PPI)

• An Over-Height Collision Protection System of Sandwich Polymer Composites Integrated with Remote Monitoring for Concrete Bridge Girders, Ohio Department of Transportation: Total Grant $220,000, with University of Akron, Duration 18 months (UCI Subcontract $103,200).

• Experimental Evaluation of Light-Weight Composite Assault Bridges, Alpha Star Corporation, $107,000 to UCI, Duration 8 months.

• Structural Testing of Repaired Composite Bridges, Alpha Star Corporation, $55,000, Duration 18 months.

• Analytical Evaluation of Diagnostic/Prognostic Smart (DPS) Field Repair System for Composite Bridges, with Alpha Star Corporation, $110,000 to UCI, Duration 18 months.

• Strengthening of Steel Girders of the Sauvie Island Bridge Steel Girders, with Portland University, $54,000, Duration: 12 months.

• Edge Fast Track Evaluation Program: $29,000, Duration: 6 months, • Edge Structural Composites: $310,000, Duration: 2 years, ($100,000 was subcontracted

to UCI), • SCCI Repair & Rehabilitation System Evaluation: $170,000, Duration: 18 months,

($49,000 was subcontracted to UCI), • Martin Marietta Composite Bridge Deck Evaluation: $45,000, Duration: 6 months,

($11,000 was subcontracted to UCI),


• Oregon Department of Transportation (ODOT) Verification of Retrofit System for Hawthorn Steel Bridge Girders, $23,500 (Planned to be Subcontracted to UCI), Duration: 6 months,

• ASCE Structural Design Manual $45,000, Duration: 18 months, • Cyclic Behavior of Masonry Walls Retrofitted With FYFE Composite System: $20,000,

Duration: 6 months, ($15,000 was subcontracted to UCI), • “Best of the West University Award” (Cash Prize) for the Composites Institute: $5,000. • US Army Corps of Engineers Thermal Cyclic of Beams Repaired with Composites:

$5,000, Duration: 6 months, • Failure Analysis of FRP Underground Tanks, Xerxes Corp.: $5,000, Duration 2 Months, • University of New Orleans, A Subcontract, Creep behavior of Composites Under High

Temperatures Environments (Phase I), $10,000, Duration: 6 Months, • University of New Orleans, A Subcontract, Creep behavior of Composites Under High

Temperatures Environments (Phase II), $25,000, Duration: 8 Months, • University of New Orleans, A Subcontract, Creep behavior of Composites Under High

Temperatures Environments (Phase III), $12,500, Duration: 6 Months, • SRRS2 Conference Industry Contributions and Registration: $25,000, • SRRS1 Conference Industry Contributions and Registration: $15,000, • Fibermesh Slabs Evaluation: $37,000, Duration: 12 Months. 2) Invited Pending Proposals (Total= $225,000): • Creep of Composite Materials and Joints at Ambient and High Temperature

Environments, $225,000, Army Research Office (ARO): 3 Years.

3) Submitted Proposals (Total= $2,746,944): • Composite Bridge Decks, $500,000, NCHRP • Bridge Security, $267,743, Caltrans • Inverted T Bridge Girders, $379,644, Caltrans • NEESR-SG, $1,599,557, NSF (P.I. L Sun) 3) Non-Monetary (in-kind) Awarded Grants (Total= $200,000):: • Four Full-Version of GENOA Finite Element Software for 10 years, Alfa Star

Corporation, Long Beach California (Market Value $200,000).

OOTTHHEERR AACCAADDEEMMIICC WWOORRKK Research Associate and Lecturer, Department of Architecture and Engineering Technology, University of District of Columbia, Washington DC. Adjunct Professor, Engineering Architectural and Departments, Northern Virginia Community Collage (NOVA).

SSEELLEECCTTEEDD CCOONNSSUULLTTIINNGG WWOORRKK


Instructor, ASCE CI Training Course on Seismic Repair of Structures Using FRP Composites, January 2007 in Irvine, California, February 2007 in New York City, April, 2006 in Cincinnati, Ohio and August 2006 in Nashville: This design course is the first national design course officially offered by the American Society of civil Engineers (ASCE) that aims at educating structural engineer with design and analytical procedures for FRP composites repair systems fro concrete, masonry, wood and steel structures. Expert and Structural Advisor, Multnomah County, Oregon. Involved in the advising and reviewing the structural design of composite repair system for the Broadway Sidewalk and Lighting Replacement. The rehabilitation system was carbon/epoxy composites and was mainly to upgrade the torsional capacity of a group of cantilever reinforced girders up to 203 in-kips. Team Member, Boeing Company, Long Beach, California: This Task Force was created in January 2000 by Boeing Company to establish a new division for composite bridges. The team is currently working in developing two prototypes of all-composite highway and military bridges. Structural Bridge Consultant for Prince George’s County, Maryland the consulting work involved structural inspection, evaluation, and design recommendations for the Wheeler Road Roadway Bridge. The bridge is H20 R/C culvert which was constructed in the early 1900's (1900-1910). Both super and substructure were suffering from deterioration and corrosion. The posted load was 12 tons at 25 mph. Different solutions were presented to rehabilitate the Roadway Bridge. Structural Consultant, Fluor Daniel, Irvine, California. The work involved preparation of engineering reports, which include the required engineering information for preparing of bid documents for the MIDOR Oil Refinery Project in the Industrial Free Zone, Alexandria, Egypt. The project is a multi-millions dollars Egyptian/Israeli/USA Joint venture. The consulting work included preparation of four technical engineering reports describing the industrial facilities, local materials and services, and the structural requirements according to the Egyptian design codes. This includes the seismic, wind, mechanical, electrical, and environmental Egyptian standards. The reports also included a survey on the available local resources, including materials, equipment, and certified contractors in different areas. Subcontractor, American Society of Civil Engineers/Pultrusion Industry Council (ASCE/PIC) Standards Project, Washington, D.C. Acted as the technical consultant through a subcontract with the project’s general contractor. The general contractor of this project was Chambers Engineering, p.c., Canton, Massachusetts. This project is the first phase of a multi-phase national project to develop design standards, and specifications for structural plastics and composites for civil engineering applications. The duties also included the development of a database containing the available state-of-the-art research work in this area. The technical information included in the data reviewed, analyzed and evaluated. The work also involved the development of the outlines and identification and description of subjects and topics for each chapter of the ASCE standard document. In addition, a chapter on Design Standards of Composite Connections was prepared.


Subcontractor, University of New Orleans, Mechanical Engineering Department, New Orleans, Louisiana, Acted as a subcontractor for the Mechanical Engineering Department of the University of New Orleans. The project was a part of a multidisciplinary research project funded by the US Navy. The work included developing theoretical models to characterize the creep behavior of thick composites under fire environment. During the course of this work, a comprehensive database was developed on the subject. Simplified viscoelastic Moduli were developed. The results of this study were presented, in the form of two technical joint papers, at the Third International Conference on Composite Engineering (ICCE/3). Technical Advisor, University of South Florida, Tampa, Florida. The project is sponsored by the US Army to develop light-weigh shelters for disaster areas. The duty includes structural analysis including wind, optimization and development of the modular housing unites. Engineering Advisor, Royal Prince Turki Bin Abdullah Al Saud: Acted as the Engineering Advisor for two major projects owned by the Crown Prince Family. The first project is the construction of a secured village composed of 1,800 houses and its infrastructures for housing US Army personnel in Al-Khobar, Saudi Arabia (total construction cost is $1.4 billion dollars. The second project is the construction of Sheraton Hotel to be built on an artificial island in the Parisian Gulf. The total budget is $800 million dollars. Structural Expert, Pultrusion Industry Council (PIC) Design Manual Project, The Composites Institute, Society of Plastics Industry, New York, New York. Duties included the establishment of the outlines of the PIC Structural Design Manual. Composite Structures Expert, University of New Orleans, LA. Acted as a subcontractor to perform theoretical and finite element modeling of E-glass/vinyl ester panels under elevated temperature and fire environment. The work involved time- and temperature-dependent characterization and prediction of both strength and stiffness degradation of the material under fire environment. The work is a part of a general contract funded by the US Navy.

Bridge Engineering Advisor, Ministry of Transportation, Riyadh, Saudi Arabia. The work involved direct contact with Saudi Arabia Secretary of Transportation, Dr. Naser Al-Saloum in developing different repair and rehab strategy for the highway bridges in the Kingdom. A comprehensive site survey for several highway bridges in the Eastern Province of the Kingdom was conducted. This included field testing, structural evaluation reports, as well as recommendations for repair methods including high performance composite materials. The work also extended to perform to demonstration projects on two highway bridges using composites Structural Consultant, International Gratings, Inc., Parkhurst, Texas. Evaluated and assessed the damages of the FRP structural systems of two major copper mining facilities of


Phelps Dodge Morenci, Morenci, Arizona. Reviewed the original design, and provided solutions and stiffening details for upgrading the existing FRP structural systems, and provided new design details for the failed FRP connections and pultruded FRP open-web columns.

Structural Consultant for Bedford Reinforced Plastics, Inc., Bedford, Pennsylvania. This work included the development of design tables and design procedures for thin-walled off-the-shelf pultruded columns. The work also included preparation of a chapter on connection design and details for fiber-reinforced composites.

PPRROOFFEESSSSIIOONNAALL MMEEMMBBEERRSSHHIIPPSS Society Memberships: • American Society of Civil Engineers (ASCE), • American Concrete Institute (ACI), • International Code Council (ICC), • American Society for Testing and Materials (ASTM), • The Scientific Research Society (Sigma Xi),

Committee Memberships: Member of the Technical Advisory Council of the International Accreditation Service

(IAS), Member of the Materials Directorate of the Construction Institute (CI), American

Society of Civil Engineers (ASCE). Voting Member and Design Code Document Contributor and Reviewer, American

Concrete Institute (ACI), Committee ACI- 440, Chairman, Task Force on FRP Seismic Repair of Concrete and Masonry

Structures, American Concrete Institute (ACI), ACI 440, Member of the US-UK Exchange Experience In Civil Infrastructures Sponsored by the

National Science Foundation (NSF), London, UK, Chairman of the International Composites Engineering Infrastructure Committee. Professional Member of the International Code Council ICC, and a Major

Contributor of the revised, ICC-ES AC125 and AC178 Documents, Voting Member, ASTM C-09, C-17, D-20, and D-30 Committees, American Society

for Testing and Materials (ASTM), Associate Member, American Concrete Institute (ACI), Committee ACI- 544: Fiber

Reinforced Concrete, Control Group Member, ASCE Committee on Structural Composites & Plastics

(SCAP). Member, ASCE Committee on Standards for Structural Composites & Plastics. Chairman of ASCE/Standards Subcommittee on Composites Connections Design Standards.

Acted as the Chairman of the ASCE/SCAP Task Force on Composites Connections for developing the guidelines for the ASCE Composites Connections Design Handbook (Phase II).


Chairman of ASCE/SCAP Subcommittee on Education and Technology Transfer. Member of Task Force A2C51, Structural Applications of Fiber Reinforced Plastics, Transportation Research Board (TRB).

Editorial Board Member, Composites Journal, Part B: Engineering, Elsevier Science, Ltd.

Guest Editor on Special Issues on Infrastructures Applications of Composites, Composites Journal, Elsevier Science, Ltd.

Guest Co-Editor (with Professor Teng) on a 3-Volume Special Issue on Infrastructures Applications of Composites, Journal of Reinforced Plastics & Composites, Sage Publishing Company, UK,

Serving as a Peer Reviewer of the following journals and Code documents, and proposals:

⇒ American Concrete Institute (ACI) Structural Journal, ⇒ Composites Journal, Part B: Engineering, Elsevier Science, Ltd., ⇒ Journal of Materials in Civil Engineering (JMCE/ASCE), ⇒ Journal of Bridge Engineering (ASCE), ⇒ Journal of Composite Structures, ⇒ Structural Health Monitoring; An International Journal, ⇒ National Science Foundation Review Committees on Large Structures,

Construction Processes, and Earthquake Hazards Mitigation Programs. ⇒ Canadian Journal of Civil Engineering ⇒ Army Research Office (ARO) Environmental Program ⇒ King Saud University (KSU) Scientific Journal ⇒ Natural Science and Engineering Research Council of Canada (NSERC). ⇒ Louisiana Transportation Research Center (LTRC) ⇒ The U.S.A. Technical Advisory Group, ISO/TC 61-Plastics

Chaired and actively involved in organizing several sessions on national and international technical conferences and Workshops: 1. Member of the International Scientific Committee of 3rd International Conference on

Durability & Field Applications of Fiber Reinforced Polymer (FRP) Composites for Construction, May 22-24, 2007, Québec, Canada.

2. Member of the International Scientific Committee of Structural Faults and Repair’06, Edinburgh, Scotland, June 12-15.

3. Member of the International Scientific Committee, International Bridge Management Conference, Housing and Buildings National Research Center (HBNCR), Cairo, Egypt, March 21-23.

4. Session Chairman, International Bridge Management Conference, Housing and Buildings National Research Center (HBNCR), Cairo, Egypt, March 21-23, 2006.

5. Session Chairman, ICCST/5 Conference, American University at Sharjah (AUS), United Arab Emirates, February 2005.

6. Session Chairman, NSF/AUD Workshop on Civil Engineering Infrastructure Systems High Performance Materials, Monitoring & Management, American University in Dubai (AUD), Dubai, United Arab Emirates, April, 2006.


7. Session Chairman, SAMPE’05 International Conference, Long Beach, California, May 2005.

8. Member of the International Scientific Committee of the International Congress Construction Rehabilitation and Sustainable Development, Algiers, April 2005.

9. Invited member of the National Science Foundation (NSF) Workshop, CEIS – Civil Engineering Infrastructure Systems Conference, May 2005, American University at Beirut, Beirut, Lebanon.

10. Invited member of the National Science Foundation (NSF) Workshop on Research in FRP Composites in Concrete Construction October 22-23, 2004 San Francisco California,

11. Member of the Advisory Board of the Structural Faults + Repair 2006, Edinburgh, Scotland, UK.

12. Member of the International Scientific Committee of the HBRC04 Conference, Cairo, Egypt, December 2004,

13. Member of the International Scientific Committee of the International Congress Construction Rehabilitation And Sustainable Development, Algiers, April 2005,

14. Session Chairman, SAMPE’05 International Conference, Long Beach, California, May 2005,

15. Session Chairman, ICCST/5 Conference, Sharjah, United Arab Emirates, February 2005,

16. Member of the International Scientific Committee of the 2nd Advanced Polymer Composites for Structural Applications in Construction Conference (ACIC 2004), Surrey, England, April 2004.

17. Member of the International Scientific Committee of the 2nd International Conference on FRP Composites in Civil Engineering (CICE 2001), Australia, December 2004.

18. Member of the International Scientific Structural Committee of the HBRC First International Conference in Urban Development, Cairo, Egypt, December 20-22, 2004.

19. Session Chairman, SAMPE’04 International Conference, Long Beach, California, May 2004.

20. Chairman of Infrastructure Symposium, 11th International Conference on Composite Engineering (ICCE/11), Head Island, South Carolina, August 8-14, 2004.

21. Member of the International Scientific Committee of the International Conference on Performance of Construction Materials in the New Millennium (ICPCM), Cairo, Egypt, February 2003.

22. Session Chairman, the International Conference on Performance of Construction Materials in the New Millennium (ICPCM), Cairo, Egypt, February 2003.

23. Member of the International Scientific Committee of 1st Advanced Polymer Composites for Structural Applications in Construction Conference (ACIC 2002), Southampton, England, April 2002.

24. Member of the Editorial Board & Chairman of the Infrastructure Symposium, 9th International Conference on Composite Engineering (ICCE/9), San Diego, California, July 2002.


25. Member of the International Scientific Committee of the International Conference on FRP Composites in Civil Engineering (CICE 2001), Hong Kong Polytechnic University, Hong Kong, China, December 2001.

26. Infrastructure Symposium Coordinator and Developer, SAMPE International Conference’2001, Long Beach California, May 2001.

27. Member of the International Scientific Committee of Structural Design Faults & Repair Conference, London, England, July 2001.

28. Chairman of Infrastructure Symposium, 8th International Conference on Composite Engineering (ICCE/8), Tenerife, Spain, August 2001.

29. Member of the International Scientific Committee of the 2nd International Conference on Durability of Fiber Reinforced Polymer (FRP) Composites for Construction, Montreal (Quebec), Canada, May 2002.

30. Chairman of Infrastructure Symposium, 8th International Conference on Composite Engineering (ICCE/8), Denver, Colorado, July 2000.

31. Conference Chairman and Proceedings Editor of the 2nd Conference on Seismic Repair and Rehab of Structures (SRRS2), Fullerton, CA, March 2000.

32. Conference Chairman and Proceedings Editor of the 1st Conference on State-Of-The-Art Technologies for Seismic Repair and Rehab of Structures (SRRS1), Fullerton, CA, November 1999.

33. Chairman of the Infrastructure Symposium, Composites in the Transportation Industry, AUCN-2, Sidney, Australia, February 2000.

34. Member of the International Scientific Committee, Composites in Transportation Conference (AUCN-2), Sydney, Australia, February 2000.

35. Member of the International Scientific Committee, Composites in Transportation Conference (AUCN-3), Sydney, Australia, February 2001.

36. Chairman of Infrastructure Symposium, The 7th International Conference on Composite Engineering (ICCE/7), Denver, Colorado, July 2000.

37. Conference Vice Chairman, and Chairman of Infrastructure Symposium, The 6th International Conference on Composite Engineering (ICCE/6), Orlando, Florida, July 1999.

38. Technical Director and Moderator of Special Topics Panel Discussion Sessions, the First International Conference on Durability of Advanced Composite Materials for Construction, ACMDC’98, Sherbrooke, Quebec, Canada, August 1998.

39. Session Chairman, 8th European conference on Composites Materials ECCM-8, Naples, Italy, June 1998.

40. Conference Vice Chairman, and Co-Chairman of Infrastructure Symposium, 5th International Conference on Composite Engineering (ICCE/5), Las Vegas, Nevada, July 1998.

41. Session Chairman, ASCE Materials Congress Conference’96, Washington D.C., November 1996.

42. Conference Vice Chairman, and Chairman of Infrastructure Symposium, The Third International Conference on Composite Engineering (ICCE/3), New Orleans, Louisiana, July 1996.


43. Chairman and Proceedings Co-Editor, The First Middle East Workshop on Structural Composites for Infrastructures Applications, Sharm El-Sheikh, Egypt, June 1996.

44. Session Chairman, International Conference on Fiber Reinforced Structural Plastics in Civil Engineering, Madras, India December 1995.

45. Chairman of Infrastructure Symposium, Second International Conference on Composite Engineering (ICCE/2), New Orleans, Louisiana, August 1995.

46. Chairman of Infrastructure Symposium, First International Conference on Composite Engineering (ICCE/1), New Orleans, Louisiana, August 1994.

47. Session Chairman, ASCE’94 Conference (Infrastructure: New Materials and Methods for Repair), San Diego, November 1994.

48. Session Chairman, Annual Energy-sources Technology Conference, New Orleans, Louisiana, January 1993, and 1994.

49. Organizing Committee Member, Symposium on High-Performance Computing for Flight Vehicle (NASA/GWU/UV) Arlington, Virginia, December 1992.

MMAAJJOORR PPUUBBLLIICCAATTIIOONNSS:: Books and Educational Materials: 1. Mosallam, A.S. (2005). Design for FRP Composite Connections, in progress, ASCE

Manuals and Reports on Engineering Practice #102, American Society of Civil Engineers (ASCE), Virginia, USA.

2. Mosallam, A.S. and J-G Teng (Co-Edt.) (2003). Special Issue on Structural Composites in Construction - 1, Volume 22, Issue 13, September, Sage Publishing Company, UK.



5. Mosallam, A.S. (2002), “Chapter on Composites in Construction”, Chapter 45, Materials Handbook, John Wiley Publishing Co., NY, USA, 53 ps.

6. Mosallam, A.S. (2000), Innovative Seismic Repair & Rehabilitation Systems, Technomic (Sage) Publishing Co., ISBN 1-56676-964-7.

7. Mosallam, A.S. (2000), “Advanced Seismic Retrofit Systems: Design Aspects, Durability, and Health Monitoring,” SRRS Center, Fullerton, California, 106 ps.

8. Mosallam, A.S. (1998), “Advanced Seismic Repair & Rehabilitation Structural Systems.” Proceedings, CSUF State-of-the-Art Techniques for Seismic Repair & Rehabilitation of Structures Conference, November 8, 201ps.

9. Mosallam, A.S. (1998). Special Issue on Structural Composites in Infrastructures - 2, Vol. 31B, No. 6/7, Composites Journal, Elsevier Science Inc., NY.

10. Mosallam, A.S. (1996). Special Issue on Structural Composites in Infrastructures - 1, Vol. 27B, No. 3/4, Composites Journal, Elsevier Science Inc., NY.

11. Mosallam, A.S. (1996), "Design of Pultruded Frame Structures and Connections" Chapter I, State-of-the-Art Report, The First Middle East Workshop on Structural Composites for Infrastructures Applications (Also Proceedings Co-editor), Society of Egyptian Engineers Press, Cairo, Egypt.


12. Mosallam, A.S. (1993) "Plastics Composites for FRP 21st Century Construction: Pultruded Structural Shapes", ASCE, N.Y., N.Y., Chapter 3.

13. Mosallam, A.S. (1983) "Dimensioning for Architects," Faculty of Engineering, Zagazig University, Cairo, Egypt.

Selected Journal and Conference Proceedings Papers and Technical Reports: 1- Abdi, F., Qian, Z., Mosallam, A.S., Iyer, R. and J-Juei Wang (2006) “Composite Army

Bridges Under Fatigue Cyclic Loading”. Journal of Society of Infrastructure Engineering (SIE), Taylor and Francis Publications, Vol. 2, No 1. March, pp. 63-73.

2- Mosallam et al. (2006). “Virtual Testing and Progressive Failure Analysis of Army Composite Bridge,” Invited Article, FRP International Newsletter, Vol. 3, Issue 2, Summer, pp. 10-14.

3- Mosallam, A.S. (2006). “Structural Evaluation and Construction of FRP Composites Strengthening Systems for the Sauvie Island Bridge,” Composites in Construction Journal, American Society of Civil Engineers (ASCE), In Press, September.

4- Erol, G., Mosallam, A.S. and A Fraouk (2006). “Seismic Strengthening of Masonry Structures Subjected to In-Plane Shear Loads Using Polymeric Composites,” Accepted for Publication, Composites Part B: Engineering, October.

5- Marwan N. Youssef, M.N., Feng, M.Q. and A. S. Mosallam (2006). “Stress-Strain Model for Concrete Confined By FRP Composites,” Accepted for Publication, Composites Part B: Engineering, October.

6- Mosallam, A.S. (2006). “Seismic Repair and Rehabilitation of Unreinforced Masonry Walls,” Accepted for Publication, Composites Part B: Engineering, October.

7- Mosallam, A.S. and S. Banerjee (2006). “Evaluation of Design Models for Shear strengthening of reinforced Concrete Beams Strengthened with Composites,” Submitted for publication to the American Concrete Institute (ACI) Structural Journal.

8- Mosallam, A.S., Russell, L. and R. Iyer (2006). “Experimental and Numerical Study on Thermal Aging and Mechanical Properties of Composite for Army Bridges,” 2006 MSC. Software Virtual Product Development (VPD) Conference, Huntington Beach, California, July 16-19.

9- Mosallam, A.S. (2006). “Structural Performance of Wood Beams Repaired & Retrofitted With Polymeric Composites,” NSF Workshop on Civil Engineering Infrastructure Systems High Performance Materials, Monitoring & Management, American University in Dubai (AUD), Dubai, United Arab Emirates, April 29-May 2, CD ROM.

10- Mosallam, A. S., Feng, M. and M. Haroun (2006). “Advances in Remote Sensing and Non-destructive Evaluation for Ensuring Safety and Security of Bridges and Structures,” International Bridge Management Conference, Housing and Buildings National Research Center (NCHRB), Cairo, Egypt, March 21-23.

11- Mosallam, A. S. (2006). “Development of a Diagnostic/Prognostic System (DPS) for Monitoring the Performance of Repaired Composite Military Bridges,” Proceedings of SPIE 13th International Symposium Smart Structures and Materials, Society of Photo-Optical Instrumentation Engineers, 26 February–2 March 2006, San Diego, California. CD ROM

12- Mosallam, A. S. (2006). “Virtual Testing of a Composite Army Bridge,” Proceedings of Structural Faults and Repair’06, Edinburgh, Scotland, June 12-15, CD ROM.


13- Mosallam, A. S. (2006). “Development of Innovative Composite System for Structural Upgrade of Steel Bridge Girders,” Proceedings of Structural Faults and Repair’06, Edinburgh, Scotland, June 12-15, CD ROM.

14- Abdi, F., Miraj, R. Mosallam, A. and J-J Wang, (2006). “A Diagnostic/Prognostic System to Monitor the Health of Composite Bridges and an Evaluation of Emergency Field Repair,” SAMPE Spring 06 Conference, Long Beach, California May 1-4. CD ROM.

15- Haroun, M.A., Mosallam, A. S. and K.H. Allam (2005). “Cyclic In-Plane Shear of Concrete Masonry Walls Strengthened by FRP Laminates,” Proceedings of Seventh International Symposium on Fiber Reinforced Polymers for Reinforced Concrete Structures, FRPRCS7, ACI, Kansas City, November, SP-230-19, pp. 327-339.

16- Qian, Z., Abdi, F., Miraj, R. and A. Mosallam (2005). “Post-fire Residual Strength of Composite Army Bridge,” Proceedings of the 4th International Conference on Composites in Fire (CIF-4) September, New Castle, England, CD ROM.

17- Iyer, R., Abdi, F., Qian, Z. and A.S. Mosallam (2005). “Composite Army Bridge Under Fatigue Cyclic Loading, Fire & Repair,” Proceedings of the 3rd International Conference on Advanced Engineered Wood Composites, July 10 – 14, 2005 Bar Harbor, ME, CD-ROM.

18- Abdi, F., Qian, Z., Iyer, R., Mosallam, A. and M. Haroun (2005). “Composite Army Bridge under Fatigue Loading,” Proceedings of the SAMPE Spring Conference, Long Beach, California, May 1-5.

19- Mosallam, A.S. (2006). Development and Evaluation of Functionally-Degraded Over-height Bridge Girders Impact Protection System, A Final Report Submitted to University of Akron & Ohio Department of Transportation, March.

20- Mosallam, A.S. (2006). Progressive Failure Analysis and Virtual Testing of Smart Repair System of Army Composite Bridges, A Final Report submitted to Alpha Star Corp. and US Army TACOM, April.

21- Mosallam, A.S. (2006). Experimental Evaluation of Scale-Down Composite Army Bridge Models under Static and Cyclic Loadings, A Final Report submitted to Alpha Star Corp. and US Army TACOM, April.

22- Mosallam, A.S. (2006). Full-Scale Experimental Evaluation of LDP Hybrid Composites Beams for Oakland Bridge Pier Protection, A Final Report submitted to Alpha Star Corp. and US Army TACOM, April.

23- Slenk, J., Mosallam, A.S. and J. Kreiner (2005). “Structural Behaviour of Carbon/Epoxy Composites under Low-Energy Impact,” Proceedings of the SAMPE Spring Conference, Long Beach, California, May 1-5.

24- Al-Assafi, S. and A.S. Mosallam (2005). “Thermo-mechanical Behavior of Pultruded Composites in Aqueous Environments,” Submitted for publication to the Composites Part B: Engineering Journal.

25- Mosallam, A.S, Slenk, J, and J. Kreiner (2004). “Performance of Woven Carbon/Epoxy Composites Subjected to Low-Energy Impact Loading,” Submitted for Publication to the Composites Structures Journal.

26- Mosallam, A.S. (2004). “Composites: Construction Materials for the New Era,” A Keynote Lecture, Advanced Polymer Composites for Structural Applications in Construction (ACIC 2004), University of Surrey, UK, April 20-22, pp. 45-58, Woodhead Publishing Limited.


27- Mosallam, A.S. and D.J. Belarbi (2004). “Strengthening and Repair Applications of Polymer Composites: A State-of the-Art Review,” A Keynote Paper, EASEC-9 Conference, Bali, Indonesia, December 14-19.

28- Mosallam, A.S, Slenk, J, and J. Kreiner (2004). “Performance of Woven Carbon/Epoxy Composites Subjected to Low-Energy Impact Loading,” Submitted for Publication to the Composites Structures Journal.

29- Mosallam, A.S., Iyer, R., Abdi, F., and M.A. Haroun, and. (2004) “Progressive Failure Analysis of a Composite Army Bridge,” HBRC Journal, Housing &Building Research Center, Cairo, Egypt, Vol. 1, No. 1, December, pp. 54-66.

30- Dutta, P. K. and A.S. Mosallam (2003). “A Rapid Field Test Method to Evaluate Concrete Composite Adhesive Bonding,” Int. Journal of Materials and Products Technology, Vol. 19, Nos. 1-2, pp. 53-67.

31- Haroun, M.A., Mosallam, A.S., Feng, M.Q. and H. M. Elsanadedy (2003). “Experimental Investigation of Seismic Repair and Retrofit of Bridge Columns by Composite Jackets,” Journal of Reinforced Plastics and Composites, Volume 22, Issue 14, September, pp. 1243-1268.

32- Hassan, N.K. and A.S. Mosallam (2004). “Buckling and Ultimate Failure of Thin-Walled Pultruded Composite Columns,“ Journal of Polymers and Polymer Composites, Vol. 12, No. 6, pp. 469-481.

33- Qiao, P. and Yang, M., and A.S. Mosallam (2004). “Impact Analysis of Over-Height Collision Protection I-Lam Sandwich System,” Engineering Structures Journal, Volume 26, Issue 7, pp. 1003-101.

34- Youssef, M., Feng, A. Mosallam (2004). “Stress-Strain Model for Concrete Confined By Frp Composites,” Submitted for publication to ASCE Structural Journal, Reston, Virginia.

35- Mosallam, A.S., and K. Mosalam (2002). “Strengthening of Unreinforced Concrete Slabs with Polymer Composites”, Journal of Construction and Building Materials, Volume 17, Number 1, pp. 43-54.

36- Mosalam, K., and A.S. Mosallam (2001). “Nonlinear Transient Analysis of Reinforced Concrete Slabs Subjected to Blast Loading and Retrofitted with CFRP Composites,” Composites, Part B: Engineering, Vol. 32, pp. 623-636.

37- Mosallam A. S. (2000). ”Strength and Ductility of Reinforced Concrete Moment Frame Connections Strengthened with Quasi-isotropic Laminates,” Composites Part B: Engineering, Vol. 31B, No. 6/7, pp. 481-497.

38- Mosallam, A.S., Kreiner, J., and K. Gillette (2000). ”Structural Upgrade & Repair of Wood Members Using Cross-ply Carbon/Epoxy Laminates,” SAMPE, Vol. 45, No. 1, Society for the Advancement of Material and Process Engineering, pp. 861-869.

39- Youssef, M., Haroun, M., Feng, M., and A. Mosallam (2000). “Experimental Study on RC Bridge Columns Retrofitted using Fiber Composite Materials,” SAMPE’s Materials & Processes Technology, Vol. 45, No. 2, Society for the Advancement of Material and Process Engineering, pp. 1803-1812.

40- Mosallam, A.S., Chakrabarti, P.R., and Arnold, M. (1999). “Making the Connections”, Civil Engineering Magazine, ASCE, Vol. 69, No. 4, April, pp. 56-59.

41- Mosallam, A.S., Chakrabarti, P.R., E. Lau. (1999). “Concrete Concertinos”, Civil Engineering Magazine, ASCE, Vol. 69, No. 1, January, pp. 42-44.


42- El-Mikawi, M., and Mosallam (1996) "A Methodology for Evaluation of the Use of Advanced Composites in Structural Civil Engineering Applications," Composites: Part: B, Vol. 27B, No. 3/4, pp. 203-215.

43- Mosallam, A.S. (1996). "Connections and Reinforcements Design Details for PFRP Composite Structures," Journal of Reinforced Plastics and Composites, Vol. 14, July, pp. 752-784.

44- Mosallam, A.S., Bedewi, N.E., and Goldstein, E. (1994) “Design Optimization of FRP Universal Connectors,” Polymer & Polymer Composites, Vol. 2, No. 2, pp. 115A-123A.

45- Bank, L.C., Mosallam A.S. and McCoy, G.T. (1994). "Design and Performance of Connections for Pultruded Frame Structures," Journal of Reinforced Plastics and Composites, Vol. 13, March, pp. 199-211.

46- Mosallam, A.S., Abdel Hamid, M. K., and Conway, J. (1993) “Performance of Pultruded FRP Connections under Static and Dynamic Loads," Journal of Reinforced Plastics and Composites, Vol. 13-May, pp. 386-407.

47- Mosallam, A.S. and M. K. Abdelhamid (1993), "Dynamic Behavior of PFRP Structural Sections," Composite Material Technology, Vol. 53, pp. 37-44.

48- Mosallam, A.S., Bank, L.C. (1992) "Short-Term Behavior of Pultruded Fiber Reinforced Plastic Frame,” Journal of Structural Engineering, ASCE, 118(7), pp. 1937-1954.

49- Bank, L. C. and Mosallam, A. S. (1992). "Creep and Failure of a Full-Size Fiber Reinforced Plastic Pultruded Frame," Composites Engineering, Vol. 2, No. 3, pp. 213-227.

50- Mosallam, A.S. (1994) “Applications of Structural Composites for Developing Countries," Arab Roads Journal, January/February, Vol. 5, pp.13-22. (Translated to Arabic).

51- Mosallam, A.S. (1993) “Pultruded Composites: Applications and Future in Egypt” Arab Roads Journal, Vol. 2, pp. 34-67.

52- Bank, L. C. and Mosallam, A.S., and McCoy, G.T. (1992). "Make Connections Part of Pultruded Frame Design,” Modern Plastics Magazine, McGraw-Hill, 65-67. Reprinted in Modern Plastics International, August, pp. 34-36. (Received the Best Paper Award).

53- Mosallam, A.S. (1993) "Plastics Composites for FRP 21st Century Construction: Pultruded Structural Shapes,” Special Publication, ASCE, N.Y., N.Y., pp. 23-55.

54- Mosallam, A. S. and I. AlJanabi (2005). “Repair and Flexural Upgrade of Unreinforced Masonry Walls using Polymer Composites,” To appear in the Proceedings of the SAMPE Spring Conference, Long Beach, California, May 1-5.

55- Abdi, F., Qian, Z., Su, X, Iyer, R., Mosallam, A. and M. Haroun (2005). “Composite Army Bridge under Fatigue Loading,” To appear in the Proceedings of the SAMPE Spring Conference, Long Beach, California, May 1-5.

56- Slenk, J., Mosallam, A.S. and J. Kreiner (2005). “Structural Behavior of Carbon/Epoxy Composites Under Low-Energy Impact,” To appear in the Proceedings of the SAMPE Spring Conference, Long Beach, California, May 1-5.

57- Al-Assafi, S. and A.S. Mosallam (2005). “Effect of Aqueous Environment on Thermo mechanical Properties of FRP Composites,” To appear in the Proceedings of the ICCST/5 Conference, Sharjah, United Arab Emirates, February.


58- Mosallam, A.S. and K. Huntley (2004). “A Pilot Project on Strengthening The Sauvie Island Bridge Steel Girders Using Advanced Composites Systems,” Proceedings of the ASCE International Conference, Fullerton, California, July, CD ROM.

59- Al-Assafi, S. and A.S. Mosallam (2004). “Impact of Aqueous Environments On Performance of Pultruded Composites,” Proceedings of the HBRC International Conference, Cairo, Egypt, December 20-22, CD ROM.

60- Mosallam, A. S., Abdi, F and R. Iyer (2004). “Development of Smart Repair Kit For Field Repair of Military Composite Bridges Using GENOA Modeling and Simulation,” SAMPE’04 International Conference Proceedings, May, Long Beach, California.

61- Mosallam, A.S. (2004). “Evaluation and Construction of Composite Strengthening Systems for the Sauvie Island Bridge,” Proceedings of the 2nd International Conference on FRP Composites in Civil Engineering (CICE 2004), Australia, December.

62- Mosallam, A.S. and M. A. Haroun (2004). “POLYMER COMPOSITES: Advanced Systems for High Performance Bridge Structures,” A Keynote Paper, The Second International Symposium on Bridges and Highway structures, Tripoli, Libya, October 2-4, 2004

63- Mosallam, A.S. (2003). Structural Evaluation of TYFO E-glass/Epoxy Systems for Seismic Strengthening of Exterior RC Beam-Column Joints, A Final Report, Report No. Fyfe-BCJ, Submitted to Fyfe Company, LLC, San Diego, California.

64- Mosallam, A.S. (2003). Field Application of FRP Composite Strengthening Systems for the Sauvie Island Bridge Steel Girders, A Final Report # APP-MULTCO-10-03, Submitted to Multnomah County Bridge Section, Portland, Oregon, October.

65- Mosallam, A.S. and M. Haroun (2003). “Structural Evaluation, Repair and Construction of a Composite Highway Bridge Deck,” Proceedings of the 2nd International Workshop on Structural Composites for Infrastructure Applications (NSF/HBRC), December 17-18, Cairo Egypt, CD ROM (A Keynote Lecture)

66- Mosallam, A.S. (2003). Field Repair Technology for Army Composite Bridges, A Final Report, Project No. A02-225, US Army TACOM, Warren, Michigan.

67- Mosallam, A.S. (2003). Structural Evaluation of FRP Composite Strengthening Systems for Rehabilitation of the Sauvie Island Bridge Steel Girders, A Final Report # ST-MULTCO-0103, Submitted to Multnomah County Bridge Section, Portland, Oregon, February.

68- Mosallam, A. S. (2002). “Structural Performance of Brick Walls Strengthened With Composite Laminates,” Proceedings of Advanced Polymer Composites for Structural Applications in Construction Conference, Southampton, England, April 15-17, pp. 317-325.

69- Haroun, M.A., Mosallam, A.S. (2002). Cyclic Shear Test of Multi-Wythe Existing Brick Wall, A Final Report, Report No. FYFE-MW, Submitted to Fyfe Company, LLC., San Diego, California.

70- Haroun, M.A., Mosallam, A.S., and F. Abdi (2002). “Experimental and Analytical Evaluation of All-Composite Highway Bridge Deck,” Proceedings of the Advanced Polymer Composites for Structural Applications in Construction Conference, Southampton, England, April, 15-17, pp. 397-404.

71- Mosallam, A. S. (2002). “Numerical Investigation on the Structural Performance of PFRP Frame Connections,” Proceedings of Advanced Polymer Composites for


Structural Applications in Construction Conference, Southampton, England, April 15-17, pp. 367-374.

72- Mosallam, A.S., Haroun, M.A., Kreiner, J., Dumlao, C., and F. Abdi (2002). “Structural Evaluation of All-Composite Deck For Schuyler Heim Bridge,” Proceedings of the SAMPE 2002 Conference, Long Beach, CA, May 12-16, pp.

73- A. Mosallam, M. Haroun, A. Hasan, H. Elsanadedy, M. Albahar, and F. Abdi (2002). “Structural Performance of the Schuyler Heim Bridge Composite Deck,” A Distinguished Lecture, Proceedings of the 9th International Conference of Composite Engineering (ICCE/9), San Diego, California, July 1-6

74- Mosallam, A. S. (2002). “A Comparative Study on the Structural Behavior of Slab-on-Grades Reinforced with Steel wire Mesh and polypropylene Fibermesh Short Fibers,” A Final Report Submitted to PCMI, Inc., Riverside, CA, USA.

75- Mosallam, A.S., and M.A. Haroun (2002). “Structural Evaluation and Modeling of All-Composite Bridge Deck,” A Final report, Submitted to Martin Marietta composites, LLC, N.C., U.S.A.

76- Mosallam, A. S. (2001). “Structural Evaluation of FiberBond Composite Systems for Repair & Rehab of Two Slabs,” A Final Report, Submitted to Edge Structural composites, Richmond, CA, U.S.A.

77- Mosallam, A. S. (2001). “Structural Evaluation of FiberBond Composite Systems for Repair & Rehab of RC Concrete Beams Under Bending,” A Final Report, Submitted to Edge Structural composites, Richmond, CA, U.S.A.

78- Mosallam, A. S. (2001). “Out-of-Plane Structural Evaluation of FiberBond Composite Systems for Repair & Rehab of Red Brick Masonry Walls,” A Final Report, Submitted to Edge Structural composites, Richmond, CA, U.S.A.

79- Mosallam, A. S. (2001). “Structural Evaluation of RC Confined Axial member Retrofitted with FiberBond Composite Systems” A Final Report, Submitted to Edge Structural composites, Richmond, CA, U.S.A.

80- Mosallam, A. S. (2001). “Repair & Upgraded Historic Bridge Decks with Carbon/Epoxy Laminates,” Proceedings of the American Concrete Institute Convention, Philadelphia, PA, March.A.S. Mosallam (2001). “Latest Developments of Design Codes, Standards, and Design Guidelines for FRP Composites in Infrastructure in USA,” Proceedings of the International Conference on FRP Composites in Civil Engineering (CICE 2001), The Hong Kong Polytechnic University, Hong Kong, 12 - 15 December 2001, Hong Kong, China.

81- A. Mosallam and P.K. Dutta (2001). “Behaviour of Epoxy Adhesives for Repair and Rehabilitation of Concrete Structures under Extreme Temperature Environments,” Proceedings of the International Conference on FRP Composites in Civil Engineering (CICE 2001), The Hong Kong Polytechnic University, Hong Kong, 12 - 15 December 2001, Hong Kong, China, pp. 1559-1568.

82- Almusallam, T.H., Al-Salloum, Y.A. and A.S. Mosallam (2001). “Durability and Long-Term Behaviour of Reinforced Concrete Beams Strengthened with FRP Composites,” Proceedings of the International Conference on FRP Composites in Civil Engineering (CICE 2001), The Hong Kong Polytechnic University, Hong Kong, 12 - 15 December 2001, Hong Kong, China, pp. 1579-1588.


83- Haroun, M.A., Mosallam, A.S., Feng, M.Q. and H.M. Elsanadedy (2001). “Experimental Investigation of Seismic Repair and Retrofit of Bridge Columns by Composite Jackets,” Proceedings of the International Conference on FRP Composites in Civil Engineering (CICE 2001), The Hong Kong Polytechnic University, Hong Kong, 12-15 December 2001, Hong Kong, China, pp. 839-848.

84- Mosallam AS, and K. M. Mosalam, and M Haroun (2001). “Repair & Rehabilitation of Reinforced & Unreinforced Concrete Slabs With Polymer Composites,” A Keynote Lecture, Proceedings of Structural Faults + Repair’2001, The Commonwealth Institute, London, UK, July 4-6, (CD ROM).

85- Mosallam, A.S., Haroun, M., Elsanadedy, H., El-Bahar, M., and A. Abdel-Kareem (2001). “Theoretical & Experimental Study On Behavior Of Unreinforced Brick Walls Retrofitted With Composites,” Proceedings of Structural Faults + Repair’2001, The Commonwealth Institute, London, UK, July 4-6, (CD ROM).

86- Mosallam, A.S. (2001) “Structural Upgrade and Repair and Rehabilitation of Wood Girders Using Cross-Ply Carbon/Epoxy Composites,” Proceedings of Structural Faults + Repair’2001, The Commonwealth Institute, London, UK, July 4-6, (CD ROM).

87- Mosallam, A.S. (2001). Seismic Repair & Retrofit of Reinforced Concrete Moment Joints Using Composites, Proceedings of Structural Faults + Repair’2001, The Commonwealth Institute, London, UK, July 4-6, (CD ROM).

88- Mosallam, A. S. (2000). “Experimental & Numerical Investigation on the Behavior of Pultruded Composite Interior Joints,” SAMPE’s Materials & Processes Technology, Vol. 45, No. 1, Society for the Advancement of Material and Process Engineering, p. 870-879.

89- Mosallam, A. S. (2000). “Repair & Upgrade of R/C Two-way Slabs with Carbon/Epoxy Laminates in Bridging the Centuries with SAMPE’s Materials & Processes Technology, Vol. 45, No. 2, Society for the Advancement of Material and Process Engineering, pp. 1813-1822

90- Mosallam, A. S. (2000). “Cyclic Performance of Reinforced Concrete Beam-column Connections Repaired and Upgraded with Carbon/Epoxy Laminates,” SAMPE’s Materials & Processes Technology, Vol. 45, No. 1, Society for the Advancement of Material and Process Engineering, pp. 1823-1831.

91- Kreiner, J. H. and A. Mosallam (2000). “Cyclic Response of Pultruded Composite Frame Connections,” Published in the Proceedings and presented, at the Israel Mechanical Engineering Conference, Beersheva, Israel, June.

92- Mosallam, A. S. and J. Kreiner. “Structural Behavior of Unreinforced R/C Two Way Slabs Retrofitted with Cross-ply Carbon/Epoxy Laminates"” presented, at the Israel Mechanical Engineering Conference, Beersheva, Israel, June.

93- Mosallam, A. S. (2000). “Experimental & Numerical Investigation on the Behavior of Pultruded Composite Interior Joints,” SAMPE’s Materials & Processes Technology, Vol. 45, No. 1, Society for the Advancement of Material and Process Engineering, pp. 870-879.

94- Mosallam, A. S. (2000). “Repair & Upgrade of R/C Two-way Slabs with Carbon/Epoxy Laminates in Bridging the Centuries with SAMPE’s Materials & Processes Technology, Vol. 45, No. 2, Society for the Advancement of Material and Process Engineering, pp. 1813-1822


95- Mosallam, A. S. (2000). “Cyclic Performance of Reinforced Concrete Beam-column Connections Repaired and Upgraded with Carbon/Epoxy Laminates,” SAMPE’s Materials & Processes Technology, Vol. 45, No. 1, Society for the Advancement of Material and Process Engineering, pp. 1823-1831.

96- Mosallam, A.S., T. Almusallam, S. Alsayed, and Y.A. Al-Salloum. (2000) “An Overview of State-of-the-art Techniques for Seismic Repair of Buildings and Bridges,” Invited Paper, First Saudi Symposium on Earthquake Engineering, King Saud University, Riyadh, Saudi Arabia, September 17-20.

97- Hui, D. and A. Mosallam (2000). “Numerical Characterization of Creep & Mechanical Properties Degradation of Composites during Fire,” Proceedings, Composites in Fire Conference, 15-16 September, New Castle, England.

98- Mosallam, A. S. (2000). “Performance of Pultruded Moment Frame Connections under Reversed Cyclic Loading Conditions,” Proceedings of the Composites in the Transportation Industry, 14-18 February, Sydney, Australia, pp. 204-209.

99- Mosallam, A. S., Haroun, M., Elsanadedy, H. and K. Gillette (2000). “Experimental and Numerical Analysis of Two-Way Concrete Slabs Repaired with Polymer Composites,” Proceedings of the Composites in the Transportation Industry, 14-18 February, Sydney, Australia, pp. 185-190

100- Mosallam, A. S. (2000). “Seismic Retrofitting of Steel Beam-to-Column Joints with Polymer Composites & Steel Stiffeners,” Proceedings of the Composites in the Transportation Industry, 14-18 February, Sydney, Australia, pp. 198-203.

101- Mosallam, A. S. (2000). “ASCE Prestandard for Pultruded Composite Structures," Proceedings of the Composites in the Transportation Industry, 14-18 February, Sydney, Australia, pp. 92-95.

102- Mosallam, A. S. , K. Gillette & R. Martin (2000). “Behavior Of Wood Members Repaired & Rehabilitated With Cross-Ply Carbon/Epoxy Laminates,” Proceedings of the Composites in the Transportation Industry, 14-18 February, Sydney, Australia.

103- Mosallam, A.S. (2000) “Non-Linear Numerical Study on the Failure of FRP Underground Tanks,” A Final Report submitted to Xeroxes Corps., MN, USA

104- Chakrabarti, P.R., Mosallam, A.S, and Lau, E.K. “Application of Advanced Composites for the Repair and Retrofit of Reinforced Concrete Moment Frame Connections Subjected to Cyclic Loading,” American Concrete Institute (ACI) Winter Meeting, Los Angeles, California, October 25-28.

105- Mosallam, A. S. (1999). “Structural Evaluation of RC Moment Connections Repaired and Retrofitted with REPLARK Carbon/Epoxy Quasi-Isotropic Laminates,” A Final Report, submitted to Mitsubishi Chemicals, N.Y., N.Y., USA.

106- Mosallam, A. S. (1999). “Evaluation of FIBERLINE Composite System for Repair & Rehab of Concrete and Wood Structures: A Fast Track Program, “A Final Report, submitted to FINELINE Corp. (Currently called Edge LLC), Richmond, California, USA.

107- Mosallam, A. S. (1999). “Structural Behavior of RC Beams under Subzero Temperatures,” A Final Report, submitted to US Army Corps of Engineers, CRREL Lab, Hanover, NH, USA.


108- Mosallam, A.S (1999). “Experimental and Numerical Study on Delamination Failure of Pultruded Composite Angles” Proceedings of the ASCE 5th Materials Congress, Cincinnati, Ohio, May.

109- Mosallam, A.S (1999). “A Numerical Study on Behavior of Pultruded Composite Frame Structures” Proceedings of the ASCE 5th Materials Congress, Cincinnati, Ohio, May.

110- Mosallam, A.S. (1999). “Seismic Repair & Upgrade of Structural Capacity of Reinforced Concrete Connections: Another Opportunity for Polymer Composites,” Proceedings, International Composites Expo’99, Cincinnati, Ohio, May 10-12, pp. 4-E/1- 4-E/8.

111- Mosallam, A.S (1999) “Cyclic Behavior of FRP Interior Frame Connections For Pultruded Structures” Proceedings, ASCE 5th Materials Congress, Cincinnati, Ohio, May 10-12, pp. 84-91.

112- Mosallam, A.S., Chakrabarti, P.R., and Kreiner, J. H., (1998). “A Pilot Study on Creep & Creep Rupture of Polymer Composite Repair Systems for Highway Bridge Applications,” Proceedings, International Symposium on Innovative World of Concrete (IWC-98), Vol. II, Calcutta, India, November 16-19, Oxford & IBH Publishing Co. PVT. LTD.

113- Chakrabarti, P.R., and Mosallam, A.S., (1998). “Performance of Welded Steel Beam-To-Column Joints Seismic Retrofitted With Polymer Composites And Steel Stiffeners,” Fiber Composites in Infrastructure, Proceedings of The Second International Conference on Composites for Infrastructures (ICCI’98), Tucson, AZ, January 5-7, 1998, pp. 160-174.

114- Mosallam A.S. (1998) “Impact of Materials Selection, Structural Detailing, and Environment on Structural Durability of Pultruded Composites,” 1998 International Composites EXPO, The Composites Institute, Nashville, Tennessee, pp. 6-E1-7.

115- Mosallam A.S. (1998) “Rehabilitation of Structures Using Advanced Composites” 1998 International Composites EXPO, The Composites Institute, Nashville, Tennessee, pp. 6-B1-7.

116- Mosallam, A.S., Kreiner, J.H. (1998) “Failure Analysis of Composite Curved Members,” Proceedings of SAMPE Conference, May, Anaheim, California.

117- Mosallam, A.S. (1998). “Rotational Stiffness of Open-Web Thin-Walled Composite Beams,” Proceedings of SAMPE Conference, May, Anaheim, California.

118- Mosallam, A.S. (1998). “State-of-the-Art Review on Connections for Pultruded Composites,” Proceeding, European Pultrusion Technology Association (EPTA) Annual Conference, Vienna, Austria, April.

119- Mosallam, A.S. (1998). “Durability pf Pultruded Fiber Reinforced Polymer (PFRP) Composites in Mining Environments,” Durability of Fiber Reinforced Polymer (FRP) Composites for Construction, Edts. B. Benmokrane and H. Rahman, ISBN: 0-921303-88-2, pp. 649-659.

120- Mosallam, A.S., and R.E. Chambers (1995) “Design Procedure for Predicting Creep and Recovery of Pultruded Composites” Proceedings, 50th Annual Conference, Composites Institute, January 30-February 1, Paper No. 6-c. (Received the Conference Best Design Paper Award)


121- Mosallam, A.S. (1995) "Performance of Pultruded Composites Frame Connections Under Cyclic and Sustained Loads," in Fiber Reinforced Structural Plastics in Civil Engineering, Tata McGraw-Hill, New Delhi, India, pp. 307-316. (Invited Paper).

122- Mosallam, A.S., and Kreiner, J.H. (1997) “Behavior of Polymer Composites Subjected to Creep and Fire Environment.” Technical Report Submitted to the University of New Orleans, January.

123- Mosallam, A.S. “Design of Pultruded Composite Column” Final Report, Submitted to Bedford Reinforced Plastics (BRP) Inc., Bedford, Pennsylvania, Included as a Design Chapter in the BRP Design Manual.

124- Bank, L.C., Xi, Z. and Mosallam, A.S. (1991). "Experimental Study of FRP Grating Reinforced Concrete Slabs,” Specialty Conference, Las Vegas, Nevada, January 31- February 1, pp. 111-122.

125- Mosallam, A.S., (1997) "Creep of Axially Loaded Concrete Members Externally Reinforced with Composite Laminates," Proceedings of The European Conference on Composite Materials, ECCM-8, Naples, Italy, June 3-6.

126- Mosallam, A.S. (1997) "Structural Evaluation of Polymer Composite Connections for Civil Engineering Structures," Proceedings of SAMPE Conference, April 1997, Anaheim, California, pp. 269-280.

127- Mosallam, A.S. (1997) "Cyclic and Long-Term Behavior of Pultruded Beam-to-Column Composite Connections" Proceedings of the International Composites Expo'97 Conference, January 27-29, Nashville, Tennessee, Session 14-B, pp. 1-18.

128- Mosallam, A.S. (1996) "Viscoelastic Behavior of Semi-rigid Composites Frame Connections" Proceedings of the Third International Conference on Composites Engineering (ICCE/3), New Orleans, Louisiana, July 21-26.

129- Mosallam, A.S., Hui, D., Kreiner, J., and Dai, B. (1996) "Viscoelastic Axial & Shear Moduli for Predicting Creep Deformation of Polymer Composites" Proceedings of the Third International Conference on Composites Engineering (ICCE/3), New Orleans, Louisiana, July 21-26, pp. s25-s27.

130- Kreiner, J., Hui, D., Mosallam, A.S., and Yip, W.K. (1996) "The Effect of Elevated Humidity on Behavior of Graphite-Epoxy Composites,” Proceedings of the Third International Conference on Composites Engineering (ICCE/3), New Orleans, Louisiana, July 21-26, pp. s28-s30.

131- Kreiner, J., Mosallam, A.S., Hui, D. (1996) “Creep Behavior of Polymer Composites Subjected to a Fire Environment” the Third International Conference on Composites Engineering (ICCE/3), New Orleans, Louisiana, July 21-26.

132- Mosallam, A.S., and Hashem, Z. A. (1996) "Structural Applications of Pultruded Composites,” Proceedings, The First Middle East Workshop on Structural Composites, Sharm-El-Sheikh, Egypt, June 14-15, 1996, pp.65-109.

133- Hashem, Z.A., and Mosallam, A.S. (1996) "Materials and Manufacturing Processes of Fiber Reinforced Plastic Composites," Proceedings, The First Middle East Workshop on Structural Composites, Sharm-El-Sheikh, Egypt, June 14-15, 1996, pp.435-456.

134- El-Mikawi, M.A., and A. Mosallam (1996) "Construction Management Techniques for Utilizing ACM in Infrastructure Applications," Proceedings, The First Middle East Workshop on Structural Composites, Sharm-El-Sheikh, Egypt, June 14-15, 1996, pp.471-486.


135- Mosallam, A.S. (1996), Experimental Investigation on the Performance of Welded Steel Beam-to-Column Joints Seismic Retrofitted with Composite and Steel, Final Report, Department of Civil Engineering, California State University, Fullerton, May 1996.

136- Mosallam, A.S., and Schmitz, H.G. (1996) "Experimental Investigation on the Behavior of UC Beam-to-Column Composite Connections Under Cyclic and Sustained Loads," Proceedings of the First International Conference on Composites in Infrastructures (ICCI'96), University of Arizona, Tucson, Arizona, January 15-17, pp. 638-650.

137- El-Mikawi, M., and Mosallam, A.S. (1996) "A Decision Making Model for Evaluation the Use of Composite Materials in Bridge Repair Applications," Proceedings of the First International Conference on Composites in Infrastructures (ICCI'96), University of Arizona, Tucson, Arizona, January 15-17, pp. 341-355. (Invited Paper)

138- Mosallam, A.S. (1995) "Behavior of Pultruded Composites Frame Structures and Connections" in Research Transformed into Practice, Editors: J. Colville, and A. Amde, ASCE Press, N.Y., N.Y., pp. 96-107.

139- Mosallam, A.S., and El-Mikawi, M.A. (1995) "Decision Making Model for Evaluating the Use of Advanced Composites in Construction Industry" Fiber Reinforced Structural Plastics in Civil Engineering, Tata McGraw-Hill, New Delhi, India, pp. 46-50. (Invited Paper).

140- Mosallam, A.S. (1997) "Embedded Optical Fiber Sensors for Buckling Performance of Composite Box Beam.” Submitted for Publication to Polymers & Polymers Composites Journal.

141- Mosallam, A.S. (1995) "Semi-Rigid Behavior of Beam-to-Column Connections For Polymer Composite Frame Structures," Proceedings, Fourth Pan American Congress of Applied Mechanics (PACAM IV), January 3-6, Universidad del Salvador, Buenos Aires, Argentina.

142- Jones, D., Mosallam, A., and Miraj, R. (1995) "Analytical and Numerical Evaluation of the Biaxial Strength of Composite Laminated Circular Sandwich Panels," Proceedings, The Second International Conference for Composites Engineering (ICCE/2), New Orleans, Louisiana, August 369-370.

143- Jones, D., Mosallam, A., and Miraj, R. (1995) "Analytical and Numerical Evaluation of the Biaxial Strength of Composite Laminated Rectangular Sandwich Panels," Proceedings, The Second International Conference for Composites Engineering (ICCE/2), New Orleans, Louisiana, August 507-508.

144- Mosallam, A.S. (1995) "Cyclic and Creep Behavior of UC Composite Frame Connections," Proceedings, The Second International Conference for Composites Engineering (ICCE/2), New Orleans, Louisiana, 521-522.

145- El-Mikawi, M.A., Murphree, E.L., and Mosallam, A.S. (1995) “Evaluation of use of Composite Materials in Infrastructure Applications," Proceedings, The Second International Conference for Composites Engineering (ICCE/2), New Orleans, Louisiana, August, 207-208.

146- Mosallam, A.S. (1995). "Seismic Performance of Pultruded Frame Structures," Proceedings of Copmosites'95, The Winning Edge, Composites Fabricators Association (CFA), October 18-21, Anaheim, California. (An Invited Lecture)


147- Plunkett, J.D., Kunez, B.P., Cohen, R., and Mosallam, A.S. (1994) "Innovative Honeycomb System for Infrastructure Applications," Proceedings, The First International Conference for Composites Engineering (ICCE/1), New Orleans, Louisiana, August, pp. 405-406.

148- Mosallam, A.S., “Flexural and Axial Moduli for Glass Reinforced Rebars for R/C Applications,” Final Report, Submitted to PolyStructures Inc., Little Rock, Arkansas.

149- Fyfe, E., and Mosallam, A.S. (1994) "Performance of Advanced Composite Retrofitting System During the Northridge Earthquake," Proceedings, The First International Conference for Composites Engineering (ICCE/1), New Orleans, Louisiana, August.

150- Mosallam, A. S. (1994) “Connections for Pultruded Composites: A Review and Evaluation,” in Infrastructures: New Materials and Methods of Repair, Editor: K.D. Basham, ASCE, N.Y., pp. 1001-1017.

151- Chambers, R.E., and Mosallam, A.S. (1994) "Design Basis for Creep in Composites Structures,” in Infrastructures: New Materials and Methods of Repair, Ed. K.D. Basham, ASCE, N.Y., pp. 265-271.

152- Mosallam, A.S., and Fyfe, E. (1994) “Performance of Composite Retrofitted Structures During the Northridge Earthquake: Case Study,” The Composites Institute 49th Annual Conference, Cincinnati, Ohio, February.

153- El-bar, E.A., Ibrahim, I.M., and Mosallam, A.S. (1994) "Flexural Response of FRP Reinforced Concrete Structures," in Infrastructures: New Materials and Methods of Repair, Ed. K.D. Basham, ASCE, N.Y., N.Y., pp. 583-591.

154- Ibrahim, I.M., and Mosallam, A.S. (1994) "An Iterative Procedure for Predicting the Flexural Behavior of R/C Beams with Composites Reinforcement," Proceedings, The First International Conference for Composites Engineering (ICCE/1), New Orleans, Louisiana, August, pp. 222-225. (A Distinguished Paper).

155- Ibrahim, I.M., Rahman, G.T., and Mosallam, A.S. (1994) "Utilization of Advanced Composite Materials In Concrete Structures," Proceedings, The 5th International Colloquium on Concrete in Developing Countries, Cairo, Egypt, January 2-6, Volume II, pp. 791-805. (Keynote Lecture)

156- Bedewi, N.E., Mosallam, A.S., and Goldstein, E. (1993) "Parametric Analysis on the Structural Performance of a Universal Connector For PFRP Frame Structures," Proceedings, 25th International SAMPE Technical Conference, Philadelphia, PA. October 25-28, pp. 622-629.

157- Mosallam, A. S., (1993), "Stiffness and Strength Characteristics of PFRP UC/Beam-to-Column Connections," Composite Material Technology, PD-Vol. 53, Proceedings, ASME Energy-Sources Technology Conference and Expo, Texas, January 31- February 4, pp 275-283.

158- Bank, L.C. and Mosallam, A.S. (1991). "Linear and Non-linear Response of Pultruded FRP Frames Subjected to Static Loads," in Plastics and Plastic Composites: Material Properties, Part Performance, and Process Simulation, ASME, N.Y., N.Y., pp. 371-386.

159- Mosallam, A.S., and Bank, L.C. (1991). "Creep and Recovery of a Pultruded PFRP Frame," Proceedings, ASCE Materials Specialty Conference, Las Vegas, Nevada, January 31- February 24-35.


160- Bank, L.C., and Mosallam, A.S. (1991) "Performance of Pultruded FRP Beam-to-Column Connections," Proceedings, 49th ASCE Structures Congress, Indianapolis, Indiana, April 29- May 1, pp 389-392.

161- Bank, L. C., Mosallam, A. S., and Gonsior, H.E. (1990). "Beam-to-Column Connections for Pultruded FRP Structures," Proceedings, ASCE Materials Congress, Denver, Colorado, August 13-15, 804-813.

162- Bank, L.C., Mosallam, A.S., and Gonsior H.E. (1990). "Beam-to-Column Connections For Pultruded FRP Structures," Serviceability and Durability of Construction Materials, ASCE, New York, NY, pp. 804-813.

163- Bank, L.C., Mosallam, A.S. (1990). "Performance of Pultruded FRP Beam-to-Column Connections," Proceedings, Structure Congress'91, Edt. T. Williamson, The 9thASCE Structures Congress, ASCE, Indianapolis, Indiana, April 29-May 1, 389-392.

164- Bank, L.C. and A.S. Mosallam (1990). Structural Evaluation of Short- and Long-Term Performance of Semi-Rigid Pultruded Frame Structures,” A Final Report, Submitted to the National Science Foundation (NSF), Washington, D.C., USA.

165- Mosallam, A.S. (1990). Short and Long-term Behavior of Pultruded Fiber-Reinforced Plastic Frame, Ph.D. Thesis, The Catholic University of America, Washington, D.C.

KKAAYYNNOOTTEE LLEECCTTUURREESS:: 1. A. S. Mosallam (2006). “State-of-the-Art Techniques for Rehabilitation and Safety of

Highway Bridges,” A Keynote Lecture, Structural Faults and Repair’06, Edinburgh, Scotland, June 12-15.

2. A.S. Mosallam, M. Haroun (2006). “Advances in Repair and Safety of Bridges”, A Keynote Lecture, International Bridge Management Conference, Housing and Buildings National Research Center (NCHRB), Cairo, Egypt, March 21-23.

3. A.S. Mosallam (2006). “Infrastructure Composites Under Extreme Conditions,” A Keynote Lecture, International Conference on Composites Engineering (ICCE-14), Boulder, Colorado, July.

4. Mosallam, A.S. (2005). “Advanced Composites: Construction Materials for the 21st Century”. A Keynote Lecture, International Workshop on Innovative Bridge Deck Technologies, Department of Transportation, Tripoli, Libya, April 14-15.

5. Mosallam, A.S. (2004). “Composites: Construction Materials for the New Era,” A Keynote Lecture, Advanced Polymer Composites for Structural Applications in Construction (ACIC 2004), University of Surrey, UK, April 20-22, pp. 45-58, Woodhead Publishing Limited.

6. Mosallam, A.S. and D.J. Belarbi (2004). “Strengthening and Repair Applications of Polymer Composites: A State-of the-Art Review,” A Keynote Paper, EASEC-9 Conference, Bali, Indonesia, December 14-19.

7. Mosallam, A.S. and M. Haroun (2003). “Structural Evaluation, Repair and Construction of a Composite Highway Bridge Deck,” 2nd International Workshop on Structural Composites for Infrastructure Applications (NSF/HBRC), December 17-18, Cairo Egypt.

8. Mosallam AS, and K. M. Mosalam, and M Haroun (2001). “Repair & Rehabilitation of Reinforced & Unreinforced Concrete Slabs With Polymer Composites,” Structural Faults + Repair’2001, Commonwealth Institute, London, UK, July 4-6.


99.. Mosallam, A.S. (1994) "An Iterative Procedure for Predicting the Flexural Behavior of R/C Beams with Composites Reinforcement," The First International Conference for Composites Engineering (ICCE/1), New Orleans, Louisiana.

1100.. Mosallam, A.S. (1999). “Design Recommendations for Reinforced Concrete Structures Repaired with Polymer Composites,” Spring Meeting, International Concrete Repair Institute (ICRI), Fullerton, CA, March.

SSEELLEECCTTEEDD PPRREESSEENNTTAATTIIOONNSS::

1. Army Research Office (ARO), Research Triangle, North Carolina. “Thermal Ageing and Creep of Army Composite Bridges,” July, 2006.

2. NSF Workshop on Civil Engineering Infrastructure Systems High Performance Materials, Monitoring & Management, American University in Dubai (AUD), Dubai, United Arab Emirates, April, 2006.

3. UCI CEE Seminar, Spring 2006, “Applications of Advanced Composites in Construction”, Civil & Environmental Engineering Department.

4. NSF Workshop on Research in FRP Composites in Concrete Construction, March 2005, San Francisco, CA.

5. National Academies Workshop on Using Information Technology to Enhance Disaster Management, The Keck Center of the National Academies, Washington, D.C., June, 2005 (A Joint Presentation with Prof. Shinozuka).

6. NSF Workshop on FRP Composites Structures, Housing & Building Research Center (HBRC), Cairo, Egypt, December 2005.

7. “Composites in Construction: Past, Present and Future,” Structural Department, University of California at San Diego (UCSD), Invited Lecture, May 10, 2004.

8. “Light Weight Deck Systems for Repair and Rehabilitation of Corroded Reinforced Concrete Bridge Decks,” Bridge Division, NY Department of Transportation, Region 6, Hornell, New York, December 2000.

9. “New Technologies in Seismic Repair and Rehabilitation of Reinforced Concrete Bridges,” Engineering Services, California Department of Transportation (Caltrans), Sacramento, California, July 2000.

10. “Structural Repair and Rehabilitation of Reinforced Concrete Structure in Corrosive and Seismic Zones,” Department of Civil Engineering, University of South Florida, Tampa, June 2000.

11. “Seismic Upgrade of Medical Facilities (S.B 1953) Using Polymer Composites Technology,” City Engineers Association of Orange County, Santa Ana, California, April 2000.

12. “Polymer Composites: Construction Materials for the 21st Century,” Department of Civil & Materials Engineering, University of Illinois at Chicago, Chicago, IL, March 2000.

13. “Innovative Techniques for Seismic Retrofit of Underground Reinforced Concrete Utility Tunnels,” Engineering Division, University of California, Berkeley, June 1999.

14. Advanced Composites for Repair and rehab of Highway Tunnels, Engineering Division, City of Richmond, Richmond, California, June 1999.

15. Pultruded Composites: Materials for the 21st Century, (Invited Presentation), University of Paris, Paris, France, and April 1999.


16. Structural Evaluation of Composite Frame Connections, University of California, Irvine, March 1999.

17. “Applications of Composites in Petrochemicals Plants”, (Invited Lecture), ARAMCO, Saudi Arabia, April 1999.

18. “Performance of Structural Composites in Industrial Environment”, (Invited Lecture), SABIC, Intercontinental Hotel, Al-Joubail Industrial City, Ras Tanoura, Saudi Arabia.

19. “Structural Applications of Polymer Composites in Oil Industry”, (invited Lecture), Arab Oil Company (AOC), AlKhafji, Saudi Arabia, April 1999.

20. "Evaluation of Composites Framing Connection in Civil Engineering Applications," American Society of Civil Engineers Conference, Washington, D.C., November 1997.

21. "Short- and Long-term Behavior of Composites Connections," Invited Lecture, US Army Corps of Engineers Cold Region Research and Engineering Laboratory, Hanover, New Hampshire. April 24, 1996.

22. "Composites: Materials for the 21st Century," School of Engineering, Tufts University, Boston, Massachusetts, March 1995.

23. “Design and Analysis of Reinforced Concrete Columns Repaired Using Composite Jackets,” Invited Lecture, Dames & Moore, Structural Group, Santa Ana, California. (1995)

24. “Roles for Establishing Design Standards for Pultruded Composites,” Technical Committee, The Pultrusion Industry Council Winter Meeting, Atlanta, Gerogia. (Invited and Sponsored by ASCE). (1994),

25. “Use of Composite Laminates for Seismic Repair of Oil Refinery Reinforced Concrete Structures” Fluor Daniel Co., Headquarters, Irvine, California. (1994)

26. “Repair and Strengthening of Highway Bridges Using Advanced Composites,” Invited Lecture, Ministry of Transportation, Riyadh, Kingdom of Saudi Arabia, May 7, 1994.

27. "Applications of Advanced Composites for Repair of R/C Structures," Keynote Presentation, The Fifth International Colloquium on Concrete in Developing Countries, Cairo, Egypt, January 2, 1994.

28. "An Innovative Technique for Connecting PFRP Structural Elements,” TRB Committee A2C07 on Structural Fiber Reinforced Plastics, The Transportation Research Board Annual Meeting, Washington, D.C., January 10, 1993.

29. “Pultruded Composites: Construction Materials for Developing Countries,” Invited Lecture, Engineering Division, USAID Mission, Cairo, Egypt, June 12, 1993.

30. "Civil Engineering Applications of Pultruded Fiber Reinforced Plastics Composites," Symposium on High-Performance Computing for Flight Vehicles (NASA/GWU), Arlington, VA, December 15, 1992.

31. “Applications of Advanced Composites in Bridge Rehabilitation in Egypt,” Invited Lecture, The Egyptian General Authority for Roads and Bridges, NASA City, Cairo, Egypt, July 25, 1992.

32. "Structural Behavior of PFRP Portal Frames,” Invited Lecture, Academic Center, School of Engineering and Applied Science, George Washington University, Washington DC, December 3, 1991.


MMEEDDIIAA IINNTTEERRVVIIEEWWSS

Cited in Engineering News-Records (ENR) Cover Story article titled: The 21st Century Interstate Features a New Material, March 13, 2006 (enr.com) — A portion of this article appeared also in ARI News.

Interviewed by Discovery Channel as part of a documentary on blast mitigation of civil structures (aired in February 2006)

Cited in NGCC Newsletter published by Network Group for Composites in Construction Cited at COBERA and Composites International Websites. Cited at Purdue University Emerging Construction Technologies Website. Appeared in KOCE Channel, Real Orange Program, March 22, 2000. Interviewed by High Performance Composites Magazine as an Expert on New

Construction Systems and Building Codes, July Issue, 2000. Cited in a Feature Article on Composite Bridges, High Performance Composites

Magazine, August 2001. Interviewed by Dansk Teknisk Tidsskrift Magazine (Denmark), Vol. 11, December

1999 on Damage assessment and repair of reinforced concrete frame joints. • Interviewed by Titan Daily Newspaper on Efforts to keep buildings from falling,

February 1998. • Appeared in Channel 8 News, and ABC, January 18, 1993, as a Structural Expert on

Structural repair and advanced materials during the Northridge Earthquake. • Interviewed by the CNN Science and Technology Program team in Washington DC on

January 20, 1994 as an Expert to illustrate new technology for seismic repair of highway bridges and buildings.

CCOOMMPPUUTTEERR AANNDD LLAABBOORRAATTOORRYY SSKKIILLLLSS

• Computer oriented skills including familiarity with GENOA, NISA II, ANSYS, NASTRAN, FORTRAN, and several computer-programming languages.

• Developed several structural computer codes, including: i) Structural design and structural layout of composite steel/concrete floor

system, ii) Viscoelastic analysis of composites frame structures including both shear

deformation and connection flexibility, iii) Failure analysis of frame structures with semi-rigid joints, as well as the

predictions of buckling load for PFRP thin-walled elements, iv) Nonlinear analysis of concrete structural elements reinforced with laminated

composites. v) Design and Failure Analysis of Composite Single and Multi-bolted Joints

(included as a part of the ASCE Design Manual (2004)). • Capable of using many types of laboratory equipment, field instrumentations, photoelastic

equipment, fiber optic sensors, shape memory alloys, and other health monitoring sensors, as well as data acquisition devices and related software programs.