avina infant cpap units
TRANSCRIPT
AVINA Infant CPAP Units
AVINA Bubble CPAP
AVINA Bubble CPAP unit is a neonatal pressure-metric, continuous flow, portable CPAP unit for distressed new born or premature babies (up to 20 Kg).
It does the treatment at continuous positive pressure.
The use of Bubble CPAP can limit the development of Broncho pulmonary dysplasia(BPD) and provides oscillations which may have some physiological benefit to pre-mature lungs.
Neonatal Delivery Unit with Air-O2 Mixer
AVINA Easy Resuscitation Unit acts as Neonatal Delivery Unit consisting of Air-O2 Flowmeter based Mixer, Pressure Manometer, Pressure Limiting Valve.
Bubble CPAP Generator
Rotating Pressure Adjustment Lever Gas discharge ports direct gas away 360 Swivel inlet connector Water level adjustment port allows water to be added or removed without disconnecting expiratory circuit
CPAP Pressure - 0 to 10 cmH2O
PARTS
Technical Specifications:
Dimensions : W135 x D170 x H 156 mm Heater wire capacity: 60W max
Heater plate capacity: 150W, 110? Max
Heater Plate Overheat :Cutoff: 118±6?
Servo Humidifier
• Dual Temp control both Chamber & Airway
• High/Low alarm both airway & chamber
• Heater wire mode offer optimal humidity & less water condensation.
Temperature Control:
Invasive mode: Chamber outlet 37Deg C Airway 40Deg C
Noninvasive mode: Chamber outlet 31Deg C Airway 34Deg C
CPAP Interface
Nasal ProngsNasal Prongs are reusable, soft silicone make, comfortable and low resistance
Three Sizes Available - Small, Med, Large
Infant Bonnet is made up of Cotton, and is latex free.
Heated Wire CircuitsReusable and Disposable Heated Wire Breathing Circuits and Non Heated Wire Circuits available
Air Oxygen Blender
Air Oxygen Blender mixes Air and Oxygen in proportion decided by the knob Setting
AVINA DigiCPAP• WORKING : Inbuilt Valve Based Continuous Flow
• DISPLAY : Digital Display for FiO2, MAP and CPAP
• AIR FLOW : 0 to 20 lpm Calibrated
• O2 FLOW : 0 to 20 lpm Calibrated
• CPAP : 0 to 30 cmH2O
• MAP : 5 to 40 cmH2O (Max Pressure)
• BATTERY : 2 hours Battery Backup
• FiO2 : Inbuilt Oxygen Sensor - 21% to 100%
• ALARMS : High/Low Pressure, High/Low FiO2, Apnea, Battery Low
• APNEA : Apnea Detection settable betn 10-20 sec
AVINA EasyCPAP
• WORKING : Inbuilt Valve Based Continuous Flow
• DISPLAY : Pressure Guage -20 to 100 cmH2O
• AIR FLOW : 0 to 20 lpm Calibrated
• O2 FLOW : 0 to 20 lpm Calibrated
• CPAP : 0 to 30 cmH2O
• MAP : 5 to 40 cmH2O (Max Pressure)
COMMON FEATURES•Inbu
ilt nCPAP Driver produces constant, stable and accurate CPAP Pressure with its unique valve design
Inbuilt CPAP Generation
•Apnea time can be set between 10 sec to 30 sec. Breath is only detected when baby’s effort crosses the Trigger level set above CPAP Pressure.
Apnea Detection and Alarm
•Safety against over pressure is provided by setting MAP or Maximum Applied Pressure or PIP (Peak Inspiratory Pressure)
Maximum Pressure Limit – MAP
•High, Low CPAP Pressure alarm indications, High and low Oxygen Alarm indication,Battery Low Indication
Automatically Set Safety Features
NEONATAL RESUSCITATION ACCESSORIES
Infant / Child Resuscitation Kitincluding Ambubag, Oxygen Face mask, Non-breathing valve, Reservoir Hose, Reservoir Bag all in a case
Jointless Oxygen HOOD (Polycarbonate) – Available in two sizes
Reusable NASAL ProngsAvailable in three sizes
Laryngoscope SetPenlite handle with 3 Miller Blade sizes - 00, 0 & 1
Oxygen (FiO2) AnalyzerSlow Suction Unit
Head Immobiliser
THANK YOU
AVI Healthcare Private Limited
Factory:25, Nanddeep Industrial Estate, Kondivita Lane, Near JB Nagar,Andheri East, Mumbai - 400059
Mobile: +91 9322294345, +91 9820228952
Landline: +91 22 28326240 / +91 22 28320452 / +91 66926066
Email id: [email protected] / [email protected]