automation products catalog

This catalog will be periodically updated with new and updated pages. The

current version and update packages can be found on our website

www.pamensky.com or can be requested from V.J. Pamensky Canada Inc.

1 877 PAMENSKY.

PAMENSKY

Automation ProductsVariable Frequency Drives

Soft Starters

Panels

Industrial Control Products

101

TERMS AND CONDITIONS OF SALE V.J. PAMENSKY CANADA INC.

1. EXCLUSIVE CONDITIONS OF SALE: This Quotation or Order is subject to terms and conditions contained here-in and supersedes

Buyer’s Specifi cation and/or Purchase Order. Seller will recognize no modifi cations or additions to these conditionsunless specifi cally

agreed to in writing by Seller. Failure of Seller to object to provisions contained in the Purchaser’s Order or any other communication

from Buyer shall not be construed as a waiver of these conditions or an acceptance of any such provisions. If Buyer places an Order

with Seller based on Seller’s Quotation, whether the Order is placed in writing or orally, then the Quotation (including Seller’s terms and

conditions) and the Seller’s acceptance of the Order will constitute the entire contract between Buyer and Seller with respect to the

subject matter thereof notwithstanding any terms and conditions inconsistent with these terms and conditions on any of Buyer’s forms

or correspondence. All orders, sales contracts and other documentation between Buyer and Seller shall become effective only when

approved and accepted by the Seller.

2. PRICES: Prices quoted herein are based upon presently prevailing duties, rates of duties, taxes, special assessments, monetary

exchange and freight as applied to materials and/or equipment purchased or imported by Seller. Seller reserves the right to amend the

price(s) in this quotation where variations in regulated costs such as rate of duties, taxes, special assessments, monetaryexchange and

freight between the date of quotation and date of delivery are deemed signifi cant by the Seller.

3. TERMS OF PAYMENT: The standard terms of payment are Net-30 Days from date of invoice, with a service and interest charge of

1-1/2% per month (18% per annum) on past due invoices applying. If Buyer defaults in any payment when due or refuses to accept

delivery or becomes insolvent, the Seller at its option, without prejudice to other lawful remedies, may defer deliveries or cancel the re-

mainder of the order. Equipment held for Buyer shall be at the risk and expense of Buyer and payment shall become due from the date

of which Seller is prepared to make shipment. Printed terms on face of our Quotation will take precedence.

4. TITLE: Title to the goods covered by this Quotation and the right to immediate possession thereof shall remain with the Seller until the

purchase price is paid in full and Buyer hereby grants to Seller a security interest in the equipment (and all proceeds thereof) to secure

the Buyer’s obligation to pay for the equipment.

5. CERTIFICATIONS AND TAXES: Prices do not include sales, use or other similar federal, state or local taxes. Any certifi cation for

special duty or tax rate must be supplied at time of order. A service charge will be applied on any credit notes necessitated by the Buyer

not providing proper certifi cation at time of order. Exception from taxes extended to the buyer does not prejudice our right to charge

the buyer with taxes plus any penalties assessed at any subsequent date should the taxing authorities determinethat the equipment is

taxable.

6. PENALTIES AND DELAYS: No penalty clause of any kind, in any specifi cation of order will be effective unless specifi cally approved

in writing by Seller. Seller shall not be liable for any damage, expenses or consequential damages caused by delays beyond Seller’s

control including without limiting the generality of the foregoing; fi re, strike, act of the Buyer, restriction by civil or military authority, Act

of God, transportation failures or inability to obtain labor, materials or manufacturing facilities. In the event of any such delay, the date of

delivery shall be extended for a period equal to the time lost by reason of the delay.

7. CANCELLATION: Orders once accepted are not subject to cancellation unless on terms that will indemnify Seller against loss and/or

expenses incurred.

8. SHIPMENT: Unless otherwise specifi ed in writing, all shipments are EX-WORKS (Incoterms 2000) Seller’s shop, in which case Seller

is not responsible for damage, apparent or concealed, or loss in transit and all claims on “collect” shipments must be made by Buyer

direct to the carrier. Seller will assist insofar as practical in securing satisfactory adjustment to reasonable claims.

9. ACCEPTANCE, INSPECTION: By virtue of Buyer issuing an order for equipment in accordance with this Quotation, he also accepts

Seller’s Terms and Conditions as part of the order. Buyer shall inspect the goods immediately upon the receipt thereof. All claims by

Buyer (including claims for shortages), except only those provided for under the WARRANTY clauses below, must be asserted in writing

by Buyer within a 10 day period or they are waived. If this contract involves partial performances, all such claims must be asserted

within a 10-day period for each partial performance.

10. WARRANTY: Seller warrants to the Buyer that its products are free from defects in workmanship and materials when operated un-

der normal conditions and in accordance with nameplate characteristic limits. This warranty will be in effect for the following time period

and for the following products:

Low voltage standard effi ciency motors NEMA & IEC frames are warranted for a period of 12 months from date of installation, but not

more than 18 months from date of manufacture.

EPACT & NEMA Premium Effi ciency motors both NEMA & IEC frames are warranted for a period of 24 months from date of installation

but for not more than 30 months from date of manufacture.

IEEE841 motors are warranted for a period of 60 months from date of installation but for not more than 66 months from date of manu-

facture.

Machines & Generators are warranted for a period of 12 months from date of installation, but not more than 18 months from date of

manufacture. These products include but are not limited to; Above NEMA size Motors: low voltage, medium voltage and high voltage,

DC motors, Turbo Generators, Hydro Generators, Synchronous Motors, and Wound Rotor Motors.

Automation products (variable frequency drives and soft starters) and Electrical components are warranted for a period of 12months

from date of installation, but not more than 18 months from date of manufacture. If any defects are claimed by the Buyer during the

101

warranty period, Seller’s sole obligation shall be limited to alteration, repair or replacement at Seller’s expense, EX-WORKS (Incoterms

2000) Seller’s shop, on parts or equipment which upon return to Buyer and upon Buyer’s examination prove to be defective.

UNLESS OTHERWISE SPECIFIED IN WRITING HEREIN, THERE ARE NO REPRESENTATION, WARRANTIES OR CONDITIONS,

EXPRESSED OR IMPLIED STATUTORY OR OTHERWISE, EXCEPT FOR THE FOREGOING AND WITHOUT LIMITING THE GENERAL-

ITY OF THE ABOVE, THERE ARE NO EXPRESS OR IMPLIED REPRESENTATIONS OR WARRANTIES CONCERNING THE QUALITY

OF THE EQUIPMENT OR THAT ANY SUCH EQUIPMENT WILL BE FIT FOR ANY PARTICULAR PURPOSE OF THE PURCHASER. THE

SELLER SHALL HAVE NO OBLIGATION TO REPAIR OR REPLACE SUCH PRODUCTS OR PARTS UNLESS IT RECEIVES AT ITS OF-

FICES IN CANADA WRITTEN NOTICE OF SUCH DEFECT WITHIN THE ABOVE-MENTIONED WARRANTY PERIOD.

This warranty does not cover the cost of transportation, labor, removal, installation, or re-testing of the new or repaired goods or parts,

or any other direct or incidental expenses incurred in shipping the product to or from Seller. Replacement goods or parts are war-

ranted for the remainder of the warranty period applicable to the goods originally supplied by the seller. No warranty shall apply to any

equipment upon which repairs or alterations have been made unless authorized by Seller, nor to equipment which hasbeen subjected to

misuse, negligence or mishandling.

11. DAMAGES: Subject to the balance of the provisions of this clause, Seller shall only be liable for the cost of replacement of any de-

fective Equipment provided hereunder. Seller shall not be liable to the Buyer in any circumstances for any incidental, special, consequen-

tial or indirect damages, including but not limited to loss of profi ts or revenue, loss of use of equipment and facilities, and claims by or

payments to customers, suppliers or other parties who have a relationship with the Buyer. This disclaimer applies to consequential dam-

ages based upon any cause of action whatever asserted against Seller including causes of action arising out ofany breach of warranty,

express or implied, guarantee, product liability, negligence, tort, or any other cause pertaining to the performance or non-performance

of this Quotation or contract by Seller and the Buyer hereby waives any right to claim punitive,aggravated or exemplary damages with

respect to a breach of this Quotation or the performance or non-performance of the Equipment, and whether such claim is founded in

contract, tort or otherwise. Seller shall not be responsible for losses or damages arising out of the negligence of the Buyer, its’ employ-

ees, agents or third party contractors. In no event will Sellers maximumliability to the Purchaser in connection with the Equipment, in-

cluding without limitation resulting from breach of contract or any other performance or non-performance of this Quotation or contract,

exceed the amount of the purchase price paid to Seller hereunder.

12. RETURNING EQUIPMENT: No equipment is to be returned without fi rst obtaining from Seller shipping instructions and a return

material identifi cation number and agreement in writing as to terms. Returned equipment, which Seller elects to accept for credit is sub-

ject to reasonable handling and restocking charge commensurate with the policy of the manufacturer plus all charges incurred by Seller.

Seller is not responsible for equipment that is returned without complying with the foregoing. Equipment isreturned at the expense and

risk of the Buyer. Returned equipment must be in the original packaging and unused.

13. PRIVILEGE AND LIEN RIGHTS: Seller retains all lien rights with regard to the equipment in accordance with any Builder’s Lien Act,

Mechanic’s Lien Act, Builder and Works Act or other legislation passed pursuant to or in replacement thereof.

14. BACK CHARGES: Seller will accept no back charges for any reason without Seller’s written permission to incur such back charges.

15. TECHNICAL ADVICE: Any technical advice furnished or recommendation made by Seller or any representative of Seller concerning

any use or application of any of the goods is believed to be reliable, but SELLER MAKES NO WARRANTY, EXPRESSED OR IMPLIED,

ON RESULTS TO BE OBTAINED. BUYER ASSUMES ALL RESPONSIBILITY FOR LOSS OR DAMAGE RESULTING FROM THE HAN-

DLING OR USE OF ANY OF THE GOODS.

16. INVALIDITY: If any provision of this contract shall be found to be invalid or illegal by reason of any determination made by a court of

competent jurisdiction or any governmental authority having jurisdiction in the circumstances, such provisions shall be severed from this

contract to the extent of such invalidity or illegality and the validity, legality or enforceability of the remaining provisions of this contract

shall not in way be affected or impaired thereby. Waiver of any default shall not be a waiver of any other or subsequent default.

17. GST NUMBER: V.J. Pamensky Canada Inc. GST Number is 105553648

18. APPLICABLE LAWS AND FORUM: This contract shall be interpreted in accordance with and shall be governed by the laws of

the Province of Ontario, and the parties agree that any disputes hereunder or with respect to this quotation or the resulting contract

between the parties shall be determined exclusively by the Courts in the Province of Ontario, and the parties hereby expressly attorn to

the exclusive jurisdiction of the Courts in the Province of Ontario.

19. LANGUAGE: The parties acknowledge that they have required that this contract and all related documents be prepared in English.

Les parties reconnaissent avoir exige que la présente convention et tous les documents connexes solent rédigés en anglais. If the Buyer

requests, a French version of this agreement will be used.

20. LIABILITY: Notwithstanding anything to the contrary herein contained, the Liability of the Seller under any circumstances whatso-

ever and without exception shall be limited to the Purchase Price of the particular item forming part of the goods.

102

Table of Contents

Variable Frequency DrivesCFW 08 Plus - Low Voltage VFD 1.1

CFW 08 Wash - Low Voltage NEMA 4X VFD 1.4

CFW 09 - Low Voltage VFD 1.8

CFW 09 Shark - Low Voltage NEMA 4X VFD 1.12



CFW 11M - - Low Voltage Modular VFD 1.30


CFW 701 - Low Voltage HVAC VFD 1.43

MVW 01 - Medium Voltage VFD 1.50

MVW 01 - Compact Medium Voltage VFD 1.53

Soft StartersSSW 05 Plus - Low Voltage Soft Starter 2.1

SSW 06 - Low Voltage Soft Starter 2.5

SSW 07 - Low Voltage Soft Starter 2.13

PanelsEDP - Enclosed Drive Panels 3.1

GPH - Combination Soft Starter 3.4

Industrial Control ProductsPESW - Enclosed Motor Starters 4.1

CWC - Miniature Contactors 4.8

CWM - Standard Contactors 4.13

RW - Thermal Overload Relays 4.25

MPW - Manual Motor Protector 4.30

Pushbuttons and Pilot Lights 4.37

ReferenceVariable Frequency Drive Sizing Guide 5.1

Direct On-Line Starters Sizing Guide 5.8

Soft Starters Sizing Guide 5.10

Version: CAN.AUT.09.2013

www.pamensky.com

101

1.1Variable Frequency Drives

www.pamensky.com

CFW 08 Plus - VFD - Features

The WEG CFW-08 line of VFD‘s offers Single

and Three Phase Input Power Supply options for

motors up to 20HP. Outstanding features and

options in a NEMA 1 enclosure allow the CFW08

Plus to be successfully used in a large variety of

applications.

Standard Features

• V/Hz or Sensorless Vector Control

• NEMA 1 Enclosure

• Single and Three-phase input voltage

• 200-240V, 380-480V or 500-600V input

voltage, 50 - 60 Hz

• 150% current overload capacity

• 16 bit DSP controlled PWM output

• 2.5 / 5 / 10 / 15 kHz adjustable swiching

frequency

• Four isolated programmable digital inputs

• Two programmable relay outputs

• Two isolated programmable analog inputs

(with special function)

• One analog output

• Protective features: Over current, motor

overload, drive over temperature, output

phase-to-phase and phase-to-ground short

circuit, DC bus over and under voltage and

external fault

• Control features: Linear and “S” ramp

acceleration and deceleration, local/remote

control, DC braking, torque boost, motor slip

compensation, electronic pot, preset speeds,

adjustable V/Hz profi le, maximum and

minimum adjustable frequency limits, two skip

frequencies, adjustable output current limit,

JOG, ride-thru, fl ying start and PID regulator.

• Display readings: Motor speed, frequency,

voltage, current, last fault, heatsink

temperature and drive status

• Ambient: 32ºF (0ºC) to 104ºF (40ºC), 3300ft

(1000m) altitude, 90% humidity,

non-condensing

Optional Features

• Dynamic Braking capabilities available

• Remote Keypad with Copy Function

• RS-232 or RS-485 Serial Interface

• Modbus Communication*

• DIN rail mounting through 2HP

*Requires optional RS-232 or RS-485 Interface

Applications

• Pumps

• Fans

• Blowers

• Conveyors

• Rollout tables

• Agitators

• Mixers

101

Variable Frequency Drives1.2

www.pamensky.com

CFW-08 - Part Number Specifi cation

1 2 3 4 5 6 7 8 9 13121110

S3H1DNA1DBSI--OP3848T0016 CFW08

1. CFW-08 Variable Frequency Drive

2. Output Rated Current 220-240V 380-480V 500-600V

0016 = 1.6 A

0026 = 2.6 A

0040 = 4.0 A

0070 = 7.0 A

0073 = 7.3 A

0100 = 10 A

0160 = 16 A

0220 = 22 A

0280 = 28 A

0330 = 33 A

0010 = 1.0 A

0016 = 1.6 A

0026 = 2.6 A

0027 = 2.7 A

0040 = 4.0 A

0043 = 4.3 A

0065 = 6.5 A

0100 = 10 A

0130 = 13 A

0160 = 16 A

0240 = 24 A

0300 = 30 A

0017 = 1.7 A

0030 = 3.0 A

0043 = 4.3 A

0070 = 7.0 A

0100 = 10 A

0120 = 12 A

* Selection Table for 2

3. Power Supply: S = single-phase

T = three-phase

B = single-phase or three-phase

4. Power Supply Voltage: 2024 = 200-240 V

3848 = 380-480 V

5060 = 500-600 V

5. Language: P = Portuguese

E = English

G = German

S = Spanish

6. Product Version: S = Standard

O = With options

7. Enclosure: blank = Standard (see technical specifi cations table)

N1 = NEMA 1

N4 = NEMA 4X

8. HMI - Human Machine Interface:

blank = standard

SI = without HMI

9. Control Board: blank = standard (CFW-08 Standard)

A1 = control 1 (CFW-08 PLUS)

A2 = control 2 (CFW-08 Plus with bipolar analog inputs)

A3 = CANopen (1)

A4 = DeviceNet (1)

A5 = Pumps

10. EMI Filter: blank = without fi lter

FA = Internal Class A fi lter

11. Special Hardware: Blank = not provided

Hx = X version special hardware

12. Special Software: Blank = not provided

Sx = X version special software

Example: CFW080040B2024EOA1

Note: (1) Not avaliable for 500-600V

101


www.pamensky.com

CFW 08 Plus - Table of Products200-240V - Single Phase

Electrical Data Mechanical Data Purchasing Data

Current

(A)

Braking

Transistor

Motor

(HP)Frame

Weight

(lb)

Degree of

Protection

Dimensions (in)

H x W x DWEG Part Number List Price

1.6 N 0.25 1 2.2 NEMA 1 5.95 x 2.95 x 5.16 CFW080016S2024EON1A1 $460

2.6 N 0.5 1 2.2 NEMA 1 5.95 x 2.95 x 5.16 CFW080026S2024EON1A1 465

4.0 N 1 1 2.2 NEMA 1 5.95 x 2.95 x 5.16 CFW080040S2024EON1A1 491

7.3 Y 2 2 4.4 NEMA 1 7.87 X 4.53 X 5.91 CFW080073B2024EON1A1 788

10 Y 3 2 4.4 NEMA 1 7.87 X 4.53 X 5.91 CFW080100B2024EON1A1 866

500-600V - Three Phase


Current

(A)

Braking

Transistor

Motor

(HP)Frame

Weight

(lb)

Degree of

Protection

Dimensions (in)


1.7 Y 1 3 5.5 NEMA 1 7.99 x 5.63 x 6.50 CFW080017T5060EON1A1 $1,057

3 Y 2 3 5.5 NEMA 1 7.99 x 5.63 x 6.50 CFW080030T5060EON1A1 1,111

4.3 Y 3 3 5.5 NEMA 1 7.99 x 5.63 x 6.50 CFW080043T5060EON1A1 1,256


10 Y 7.5 3 5.5 NEMA 1 7.99 x 5.63 x 6.50 CFW080100T5060EON1A1 1,625




Current

(A)

Braking

Transistor

Motor

(HP)Frame

Weight

(lb)

Degree of

Protection

Dimensions (in)


1.6 N 0.25 1 2.2 NEMA 1 5.95 x 2.95 x 5.16 CFW080016B2024EON1A1 $535

2.6 N 0.5 1 2.2 NEMA 1 5.95 x 2.95 x 5.16 CFW080026B2024EON1A1 543

4.0 N 1 1 2.2 NEMA 1 5.95 x 2.95 x 5.16 CFW080040B2024EON1A1 568

7.0 N 2 1 2.2 NEMA 1 5.95 x 2.95 x 5.16 CFW080070T2024EON1A1 669

7.3 Y 2 2 4.4 NEMA 1 7.87 X 4.53 X 5.91 CFW080073B2024EON1A1 788

10 Y 3 2 4.4 NEMA 1 7.87 X 4.53 X 5.91 CFW080100B2024EON1A1 866

16 Y 5 2 4.4 NEMA 1 7.87 X 4.53 X 5.91 CFW080160T2024EON1A1 1,044






Current

(A)

Braking

Transistor

Motor

(HP)Frame

Weight

(lb)

Degree of

Protection

Dimensions (in)


1.0 N 0.33 1 2.2 NEMA 1 5.95 x 2.95 x 5.16 CFW080010T3848EON1A1 $662

1.6 N 0.75 1 2.2 NEMA 1 5.95 x 2.95 x 5.16 CFW080016T3848EON1A1 685

2.6 N 1 1 2.2 NEMA 1 5.95 x 2.95 x 5.16 CFW080026T3848EON1A1 705

2.7 Y 1 2 4.4 NEMA 1 7.87 X 4.53 X 5.91 CFW080027T3848EON1A1 767

4 N 2 1 2.2 NEMA 1 5.95 x 2.95 x 5.16 CFW080040T3848EON1A1 793

4.3 Y 2 2 4.4 NEMA 1 7.87 X 4.53 X 5.91 CFW080043T3848EON1A1 979

6.5 Y 3 2 4.4 NEMA 1 7.87 X 4.53 X 5.91 CFW080065T3848EON1A1 1,168

10 Y 5 2 4.4 NEMA 1 7.87 X 4.53 X 5.91 CFW080100T3848EON1A1 1,357





Notes: The maximum motor power ratings listed above are based on WEG 2 and 4 pole motors. For motors with different numbers of poles (ie. 6 and 8 poles), other voltages and/

or from other manufacturers, specify the VFD through the motor rated current.

101


www.pamensky.com

CFW 08 Wash - NEMA 4X (IP56) VFD

The frequency inverter CFW-08 Wash is an

inverter dedicated to applications that require a

higher protection degree. The Nema 4X

protection degree assures protection against

dust, dirt and directed water jets.

Standard Features - CFW 08


• NEMA 4X Enclosure

• Single and Three-phase input voltage

• 200-240V, 380-480V or 500-600V input

voltage, 50 - 60 Hz


• 16 bit DSP controlled PWM output

• 2.5 / 5 / 10 / 15 kHz adjustable swiching

frequency


• Two programmable relay outputs


(with special function)

• One analog output





external fault





adjustable V/Hz profi le, maximum and

minimum adjustable frequency limits, two skip

frequencies, adjustable output current limit,

JOG, ride-thru, fl ying start and PID regulator.


voltage, current, last fault, heatsink

temperature and drive status


(1000m) altitude, 90% humidity,

non-condensing

Recommended Environments

• NEMA 4X indoor environments

• NEMA 12 indoor environments

• IP56 environments

Optional Features

• Dynamic Braking capabilities available


• Modbus Communication*

*Requires optional RS-232 or RS-485 Interface

Applications

• Pumps

• Fans

• Blowers

• Conveyors

• Rollout tables

• Agitators

• Mixers

101


www.pamensky.com

CFW 08 Wash - Table of Products



200-240V - Single Phase


Current

(A)

Braking

Transistor

Motor

(HP)Frame

Weight

(lb)

Degree of

Protection

Dimensions (in)


7.3 Y 2 A 11.2 NEMA 4X 10.43 x 6.50 x 8.50 CFW080073B2024EON4A1 $1,326

10 Y 3 A 11.2 NEMA 4X 10.43 x 6.50 x 8.50 CFW080100B2024EON4A1 1,456



Current

(A)

Braking

Transistor

Motor

(HP)Frame

Weight

(lb)

Degree of

Protection

Dimensions (in)


7.3 Y 2 A 11.2 NEMA 4X 10.43 x 6.50 x 8.50 CFW080073B2024EON4A1 $1,326

10 Y 3 A 11.2 NEMA 4X 10.43 x 6.50 x 8.50 CFW080100B2024EON4A1 1,456

16 Y 5 A 11.0 NEMA 4X 10.43 x 6.50 x 8.50 CFW080160T2024EON4A1 1,558

22 Y 7.5 B 15.4 NEMA 4X 13.40 x 8.47 x 8.50 CFW080220T2024EON4A1 2,090

28 Y 10 B 15.9 NEMA 4X 13.40 x 8.47 x 8.50 CFW080280T2024EON4A1 2,688




Current

(A)

Braking

Transistor

Motor

(HP)Frame

Weight

(lb)

Degree of

Protection

Dimensions (in)


1.7 Y 1 B 13.9 NEMA 4X 13.40 x 8.47 x 8.50 CFW080017T5060EON4A1 $1,578


4.3 Y 3 B 15.6 NEMA 4X 13.40 x 8.47 x 8.50 CFW080043T5060EON4A1 1,876






Current

(A)

Braking

Transistor

Motor

(HP)Frame

Weight

(lb)

Degree of

Protection

Dimensions (in)


2.7 Y 1 A 10.1 NEMA 4X 10.43 x 6.50 x 8.50 CFW080027T3848EON4A1 $1,120

4.3 Y 2 A 11.5 NEMA 4X 10.43 x 6.50 x 8.50 CFW080043T3848EON4A1 1,428

6.5 Y 3 A 11.7 NEMA 4X 10.43 x 6.50 x 8.50 CFW080065T3848EON4A1 1,680

10 Y 5 A 11.7 NEMA 4X 10.43 x 6.50 x 8.50 CFW080100T3848EON4A1 1,800





101


www.pamensky.com

CFW 08 Plus - Accessories Keypads

Description Part Number List Price

NEMA4 Remote Keypad (requires CFW08-MIS-RS & cable) HMI-CFW08-RS $148

Remote Keypad Interface MIP-CFW08-RS 70

Keypad Cover TCL-CFW08 14

Keypad Cables


1m (3.3 ft.) Remote Keypad Cable CAB-RS-1 $23

2m (6.6 ft.) Remote Keypad Cable CAB-RS-2 31

3m (10 ft.) Remote Keypad Cable CAB-RS-3 42


7.5m (25 ft.) Remote Keypad Cable CAB-RS-7.5 62


Communication and Gland Kits


RS-232 Serial Comm. Module (mounted in place of keypad) KCS-CFW08 $112

PC Communication Kit (SUPERDRIVE) KSD-CFW08 144

Interface for RS-485 Communication KRS-485-CFW08 214

101


www.pamensky.com

CFW 08 Plus - Technical Data

Power Supply

Voltage

Single-Phase 200-240V: 200/220/230/240 V (+10% - 15%)

Three-Phase

200-240V: 200/220/230/240 V (+10% - 15%)

380-480V: 380/400/415/440/460/480 V (+10% - 15%)

500-600V: 525/575/600 (+10 - 15%)

Frequency 50 / 60 Hz +/- 2 Hz ( 48...62 Hz)

Cos * (Displacement Power Factor) > 0.98

Enclosure

Drive Standard NEMA 1 in sizes 3 and 4and IP 20 in sizes 1 and 2

HMI OptionalNEMA 12 Parallel, remote HMI (IP54) (HMI-CFW08-RS)

NEMA 12 Serial, remote HMI (IP54) (HMI-CFW08-RS)

Control

Power Supply Type Switching power supply

Control Method DSP (Digital Signal Processor), 16 bits, sinusoidal PWM (Space Vector Modulation)

Control TypeImposed voltage - linear V/Hz or quadratic

Sensorless vector control (WC: Voltage Vector Control)

Switching Frequency IGBT Transistors - Frequencies: 2.5 / 5.0 / 10 / 15 kHz

Frequency Range 0...300Hz

Fequency Resolution Analog Ref.: 0.1% of Fmax. And digital ref.: 0.01 Hz (f<100Hz); 0.1 Hz (f>100 Hz)

Accuracy (25º C = 10ºC) Analog Ref.: 0.5% and digital Ref.: 0.01%

Performance

Overload capacity 150% during 60 sec. Every 10 min (1.5 x Rated Current.)

Effi ciency >95% at full load

Speed control Regulation: 1% of the rated speed with slip compensation (in Sensorless Vector)

Control Inputs

Analog 2 isolated inputs 0..10, 0/4...20mA or - 10...+10V (Al1 e Al2)1

Digital4 Programmable isolated inputs - with NPN or PNP logic (Dl1...Dl4)

2 Isolated PTC inputs via AL1 and AL2

OutputsRelay (2) 2 Programmable outpluts, 1NO & 1NC

Analog (1) 1 Isolated analog output 0...10V, 0/4...20mA ( 8 bits )

CommunicationSerial Interface RS-232 or RS-485 (optional)

“Field Bus” Networks Unit for Profi Bus DP Communication, DeviceNet (optional) and ModBus RTU (optional)

Safety Protections

DC link overvoltage / undervoltage

Overtemperature

Output overcurrent

Motor overload ( i x t )

Hardware fault, external fault and serial communication error

Output phase to phase and phase to ground short circuit

Programming fault and self-tuning error

Human-Machine

Interface

(HMI)

Commands

On/Off , Parameter Setting ( Programming of special functions )

Frequency Increment / Decrement ( Speed )

JOG, Reversal of Direction of Rotation and Local /Remote Selection

Monitoring (Reading)

Motor Output Frequency ( Hz )

DC Link Voltage ( V )

Value proportional to the frequency ( Ex.:RPM )

Heat Sink Temperature

Motor Output Current ( A )

Motor Output Voltage ( V )

Error / Fault Messages

Load Torque

Environment

Temperature 0 ... 40 °C (up to 50 °C with output current derating 2% / °C)

Humidity 5 ... 90% non condensing

Altitude 0 ... 1000 m (up tp 4000 m with output current derating 10% / 1000 m)

Finishing Color Politherm 20 mt gray and Politherm 20 mt blue

Conformities

Electromagnetic Compatibility EMC Directive 89/336/EEC - Industrial Environment; EN 61800-3 (EMC - Emission and Immunity) - Special Request

Low Voltage LVD 73/23/EEC - Low Voltage Directive / UL 508C

IEC 146 Semiconductors convertors

UL 508 C Power conversion equipment

EN 50178 Electronic equipment for use in power installations

EN 61010 Safety requirements for electrical equipment for measurement, control and laboratory use

Certifi cations

UL (USA) and cUL (CANADA) Underwriters Laboratories Inc. / USA

CE (EUROPE) SGS / England

IRAM (ARGENTINA) Instituto Argentino de Normalización

C-Tick (AUSTRALIA) Australian Communications Authority

101


www.pamensky.com

CFW 09 - Variable Frequency Drive

The CFW 09‘s Vectrue Technology combines

V/F, Sensorless Vector and Closed Loop Vector

(with encoder) control techniques in one product.

Optimal Braking saves the need for the dynamic

braking resistor in some applications allowing a

more compact and economical solution.

Standard Features


• Self Tuning to motor parameters

• NEMA 1 Enclosure up to 200HP

• IP20 Enclosure from 250 to 500HP

• 200-240V, 380-480V or 500-600/690V input

voltage

• Single or Three-phase input voltage up to

3HP/230V

*Call 1 877 PAMENSKY for higher than 3HP


• DC bus connections accessible

• Detachable Smart Keypad with dual display

and Copy Function

• 32 bit RISC microprocessor controlled PWM

output

• 1.25 / 2.5 / 5 / 10 kHz adjustable switching

frequency

• Six isolated programmable digital inputs

• Three programmable relay outputs (250Vac /

1A)


• Two programmable analog outputs (0 - 10

Vdc)




circuit, DC bus over and under voltage,

power supply under voltage and phase loss

and external fault

Standard Features - cont.



control, DC braking, torque boost, motor

slip compensation, electronic pot, preset

speeds, adjustable V/Hz profi le, maximum

and minimum adjustable motor speed limits,

three skip frequencies, adjustable output

current limit, JOG, ride-thru, fl ying start and

PID regulator


voltage, current and torque, output power

(kW), last ten faults, drive status, digital and

analog I/O status, hours powered and hours

running

• Ambient: 32ºF (0ºC) to 104ºF (40ºC), 3300

ft (1000m) altitude, 90% humidity, non-

condensing

Optional Features

• Closed loop vector control

• Remote keypad with cable and mounting

frame


• On/Off line PC programming with

SUPERDRIVE

• Fieldbus Comm: Profi bus DP, DeviceNet or

Modbus RTU, Ethernet TCP/IP

• Encoder buffered output

• Additional digital and analog I/O

• Dynamic Braking capabilities for most models

• PLC Cards

101


www.pamensky.com


1 2 3 4 5 6 7 8 9 13121110

S3H1DNA1DBSI--OP3848T0016 CFW09 Z

1. CFW-09 VSD

2. Output Rated Current for Constant Torque (CT) Sizing 220-230V 380-480V 500-600V 500-690V

0006 = 6.0A

0007 = 7.0A

0010 = 10A

0013 = 13A

0016 = 16A

0024 = 24A

0028 = 28A

0045 = 45A

0054 = 54A

0070 = 70A

0086 = 86A

0105 = 105A

0130 = 130A

0142 = 142A

0180 = 180A

0240 = 240A

0003 = 3.6A

0004 = 4.0A

0005 = 5.5A

0009 = 9.0A

0013 = 13A

0016 = 16A

0024 = 24A

0030 = 30A

0038 = 38A

0045 = 45A

0060 = 60A

0070 = 70A

0086 = 86A

0105 = 105A

0142 = 142A

0180 = 180A

0211 = 211A

0240 = 240A

0312 = 312A

0361 = 361A

0450 = 450A

0515 = 515A

0600 = 600A

0002 = 2.9A

0004 = 4.2A

0007 = 7.0A

0010 = 10A

0012 = 12A

0014 = 14A

0022 = 22A

0027 = 27A

0032 = 32A

0044 = 44A

0053 = 53A

0063 = 63A

0079 = 79A

0107 = 107A

0147 = 147A

0211 = 211A

0247 = 247A

0315 = 315A

0418 = 418A

0472 = 472A

0107 = 107A

0147 = 147A

0211 = 211A

0247 = 247A

0315 = 315A

0343 = 343A

0418 = 418A

0472 = 472A


3. Power Supply: T = Three-phase

4. Power Supply Voltage: 2223 = 220 ... 230 VAC

3848 = 380 ... 480 VAC

5060 = 500 ... 600 VAC

5069 = 500 ... 690 VAC


E = English

G = German

S = Spanish


O = With options


N4 = NEMA 4 / IP 56 (models up to 10HP)


blank = standard (with HMI of LED´S + LCD)

SI = Without HMI

IL = Optional only with LED HM

9. Dynamic Braking: blank = Standard

DB = With Built-in Dynamic Braking Transistor

RB = Regenative rectifying unit (models from 105A

at 220V, and from 86A at 380-480V)

10. Expansion Boards: blank = Standard

A1 = EBA.01-CFW09 optional



B1 = EBB.01-CFW09 optional





C1 = EBC1.01-CFW09 optional



E1 = Optional with EBE1.00 - CFW09

P1 = PLC1.01-CFW09 optional

P2 = PLC2.00-CFW09 optional

11. FieldBus Communications cards:

blank = Standard (not provided)

PD = KFB-PD optional (Profi bus DP)

DN = KFB-DN optional (Device Net)

DD = Optional with KFB – DD (Device Net Drive Profi le /

Special software)

EN = EtherNet / IP standard

12. Special Hardware: blank = not provided

H1...Hn = Special Hardware version-Optional

HD = Models from 105A at 220V, and from 86A at 380-480V are power supplied via DC link

HC/HV = The CFW09 VSDs mechanics from 2 to 8 have and inductor line for the DC link built into the product. To

request the VSD with the inductor in place just add the code “HC” (for drives operating on Variable Torque).

13. Special Software: blank = Standard Spftware Version

S1...Sn = Optional with version a special software

SF = Protocol Metasys N2

SC = Hoist functions

SN = Winder I with power calculation

SQ = Special version for Kit Device Net Drive Profi le

14. End of Part Number: Z

Example: CFW090013T2223ESZ

14

101


www.pamensky.com

CFW 09 - Table of Products

380-480V


Current

(A)Built-In

Dynamic

Braking

Maximum Applicable Motor

FrameWeight

(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

WEG Part NumberList

PriceConstant Torque Variable Torque

CT VT HP KW HP KW

3.6 Yes 2 1.5 2 1.5 1 8 NEMA 1 8.27 x 5.63 x 7.72 CFW090003T3848ESZ $1,646

4 Yes 2 1.5 2 1.5 1 8 NEMA 1 8.27 x 5.63 x 7.72 CFW090004T3848ESZ 1,685

5.5 Yes 3 2 3 2.2 1 8 NEMA 1 8.27 x 5.63 x 7.72 CFW090005T3848ESZ 1,744

9 Yes 5 4 5 4 1 8 NEMA 1 8.27 x 5.63 x 7.72 CFW090009T3848ESZ 1,884

13 Yes 7.5 6 7.5 5.5 2 13 NEMA 1 11.42 x 7.16 x 7.72 CFW090013T3848ESZ 1,980

16 Yes 10 8 10 7.5 2 13 NEMA 1 11.42 x 7.16 x 7.72 CFW090016T3848ESZ 2,464


30 36 Yes 20 15 25 18.5 3 42 NEMA 1 15.35 x 8.78 x 10.79 CFW090030T3848ESZ 3,780

38 45 Optional 25 18.5 30 22 4 50 NEMA 1 18.70 x 9.84 x 10.79 CFW090038T3848ESZ 4,502

45 54 Optional 30 22 40 30 4 50 NEMA 1 18.70 x 9.84 x 10.79 CFW090045T3848ESZ 5,628






180 External DB 150 110 150 110 8 221 NEMA 1 38.38 x 16.14 x 14.57 CFW090180T3848ESZ 18,778



312 External DB 250 185 250 185 9 476 IP20 39.37 x 27.56 x 19.33 CFW090312T3848ESZ 26,396





220-230V


Current

(A)Built-In

Dynamic

Braking


FrameWeight

(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

WEG Part NumberList


CT VT HP KW HP KW

6 Yes 1.5 1.1 1.5 1.1 1 8 NEMA 1 8.27 x 5.63 x 7.72 CFW090006T2223ESZ $1,468





24 Yes 7.5 5.5 5.5 5.5 2 13 NEMA 1 11.42 x 7.16 x 7.72 CFW090024T2223ESZ 2,274



54 68 Optional 20 15 25 18.5 4 50 NEMA 1 18.70 x 9.84 x 10.79 CFW090054T2223ESZ 5,339










220-230V - With Optional Dynamic Braking


Current

(A)Built-In

Dynamic

Braking


FrameWeight

(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

WEG Part NumberList


CT VT HP KW HP KW

54 68 Yes 20 15 25 18.5 4 50 NEMA 1 18.70 x 9.84 x 10.79 CFW090054T2223EODBZ $6,377

70 86 Yes 25 18.5 30 22 5 90 NEMA 1 21.65 x 13.19 x 10.79 CFW090070T2223EODBZ 9,109

86 105 Yes 30 22 40 30 5 90 NEMA 1 21.65 x 13.19 x 10.79 CFW090086T2223EODBZ 9,589




101


www.pamensky.com

CFW 09 - Table of Products380-480V - With Optional Dynamic Braking


Current

(A)Built-In

Dynamic

Braking


FrameWeight

(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

WEG Part NumberList


CT VT HP KW HP KW

38 45 Yes 25 19 30 22 4 50 NEMA 1 18.70 x 9.84 x 10.79 CFW090038T3848EODBZ $5,790









500-600V - With Optional Dynamic Braking


Current

(A)Built-In

Dynamic

Braking


FrameWeight

(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

WEG Part NumberList


CT VT HP KW HP KW

22 27 Yes 20 15 25 18.5 4 50 NEMA 1 18.7 x 9.8 x 10.8 CFW090022T5060EODBZ $5,526

27 32 Yes 25 18.5 30 22 4 50 NEMA 1 18.7 x 9.8 x 10.8 CFW090027T5060EODBZ 6,516






500-600V


Current

(A)Built-In

Dynamic

Braking


FrameWeight

(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

WEG Part NumberList


CT VT HP KW HP KW

2.9 4.2 Yes 2 1.5 3 2.2 2 13 NEMA 1 11.4 x 7.2 x 7.7 CFW090002T5060ESZ $1,742

4.2 7 Yes 3 2.2 5 4 2 13 NEMA 1 11.4 x 7.2 x 7.7 CFW090004T5060ESZ 1,801

7 10 Yes 5 3.7 7.5 5.5 2 13 NEMA 1 11.4 x 7.2 x 7.7 CFW090007T5060ESZ 2,305

10 12 Yes 7.5 5.5 10 7.5 2 13 NEMA 1 11.4 x 7.2 x 7.7 CFW090010T5060ESZ 2,413

12 14 Yes 10 7.5 15 9.2 2 13 NEMA 1 11.4 x 7.2 x 7.7 CFW090012T5060ESZ 2,935

14 14 Yes 15 9.2 15 9.2 2 13 NEMA 1 11.4 x 7.2 x 7.7 CFW090014T5060ESZ 3,271

22 27 Optional 20 15 25 18.5 4 50 NEMA 1 18.7 x 9.8 x 10.8 CFW090022T5060ESZ 4,194







500-690V


Current

(A)Built-In

Dynamic

Braking


FrameWeight

(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

WEG Part NumberList


CT VT HP KW HP KW

107 147 External DB 100 75 150 110 8E 253 NEMA 1 45.1 x 16.1 x 14.6 CFW090107T5069ESZ 18,119



247 315 External DB 250 185 300 220 10E 682 IP20 46.6 x 27.5 x 22.9 CFW090247T5069ESZ 39,018




472 555 External DB 500 370 600 450(370) 10E 682 IP20 46.6 x 27.5 x 22.9 CFW090472T5069ESZ 65,161

101


www.pamensky.com

CFW 09 Shark - Variable Frequency DriveCFW 09 Drives with a NEMA 4X (IP 56)

enclosure, designed for highly aggressive

environments including:

• Chemical industry

• Petrochemical

• Food industry

• Other applications requiring full protection

Standard Features


• Self Tuning to motor parameters

• NEMA 4X (IP56) Stainless Steel Enclosure

• 200-240V up to 5HP, 380-480V up to 10HP

• Single or Three-phase input voltage up to

3HP/230V


• DC bus connections accessible

• Detachable Smart Keypad with dual display

and Copy Function

• 32 bit RISC microprocessor controlled PWM

output

• 1.25 / 2.5 / 5 / 10 kHz adjustable switching

frequency

• Six isolated programmable digital inputs

• Three programmable relay outputs

(250Vac/1A)


• Two programmable analog outputs (0 - 10

Vdc)




circuit, DC bus over and under voltage,

power supply under voltage and phase loss

and external fault


• Control features: Linear and “S” amp


control, DC braking, torque boost, motor

slip compensation, electronic pot, preset

speeds, adjustable V/Hz profi le, maximum

and minimum adjustable motor speed limits,

three skip frequencies, adjustable output

current limit, JOG, ride-thru, fl ying start and

PID regulator


voltage, current and torque, output power

(kW), last four faults, drive status, digital and

analog I/O status, hours powered and hours

running


ft (1000m) altitude, 90% humidity, non-

condensing

Optional Features

• Closed loop vector control

• RS-485 Serial Interface

• On/Off line PC programming with

SUPERDRIVE

• Fieldbus Comm: Profi bus DP, DeviceNet or

Modbus RTU (Requires optional RS-232 or

RS-485 Interface), Ethernet TCP/IP

• Encoder buffered output

• Additional digital and analog I/O

• Dynamic Braking capabilities for all models

101


www.pamensky.com

CFW 09 Shark - Table of Products



220-230V


Current

(A)Built-In

Dynamic

Braking


FrameWeight

(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

WEG Part NumberList


CT VT HP KW HP KW

6 Yes 1.5 1.1 1.5 1.1 1 10 NEMA 4X 14.2 x 9.2 x 8.5 CFW090006T2223EON4Z $2,660

7 Yes 2 1.5 2 1.5 1 10 NEMA 4X 14.2 x 9.2 x 8.5 CFW090007T2223EON4Z 2,782



380-480V


Current

(A)Built-In

Dynamic

Braking


FrameWeight

(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

WEG Part NumberList


CT VT HP KW HP KW

3.6 Yes 2 1.5 2 1.5 1 10 NEMA 4X 14.2 x 9.2 x 8.5 CFW090003T3848EON4Z $2,782


5.5 Yes 3 2.2 3 2.2 1 10 NEMA 4X 14.2 x 9.2 x 8.5 CFW090005T3848EON4Z 2,980


13 Yes 7.5 5.5 7.5 5.5 2 15 NEMA 4X 16.2 x 10.2 x 8.5 CFW090013T3848EON4Z 3,300


101


www.pamensky.com

CFW 09 - Accessories

* Modbus RTU –requires optional RS-232 or RS-485 interface.

Dynamic Braking


External Dynamic Braking Module for 180A Model (16 X 9 X 10 NEMA 1 Enclosure) DBW01.0165D21801SZ $2,120

External Dynamic Braking Module for 211 & 240A Models (16 X 9 X 10 NEMA 1 Enclosure) DBW01.0240D21801SZ 2,590

External Dynamic Braking Module for 312, 361,450,515, & 600A Models (16 X 9 X 10 NEMA 1 Enclosure) DBW01.0300D21801SZ 3,159

External Dynamic Braking Module for 107,147,211,& 247A Models at 575V (16 X 9 X 10 NEMA 1 Enclosure) DBW02.0210D50691SZ 3,893

External Dynamic Braking Module for 315 & 343A Models at 575V (16 X 9 X 10 NEMA 1 Enclosure) DBW02.0300D50691SZ 5,133

External Dynamic Braking Module for 418 & 472 Amp Models at 575V (16 X 9 X 10 NEMA 1 Enclosure) DBW02.0380D50691SZ 6,363

Keypads


Standard Keypad with LED & LCD HMI-CFW09LCD $207

NEMA 4/IP56 Remote Keypad with LED & LCD HMI-CFW09LCD N4 268

Remote Keypad FRAME KIT KMR CFW09 91

Blank Keypad with Power & Error LED’s TCL CFW09 29

Caps


External DC Bus Cap Kit 1500uF (includes bleeder resistor, mounting bracket, & screws) CFW09CAP1500 $240

External DC Bus Cap Kit 4700uF (includes bleeder resistor, mounting bracket, & screws) CFW09CAP4700 280

Keypad Cables


1m (3.3 ft) Remote Keypad Cable CFW09HMI091 $31

2m (6.6 ft) Remote Keypad Cable CFW09HMI092 39

3m (10 ft) Remote Keypad Cable CFW09HMI093 50


7.5m (25 ft) Remote Keypad Cable (Requires CFW09KMR09) CFW09HMI097 88

10m (33 ft) Remote Keypad Cable (Requires CFW09KMR09) CFW09HMI0910 108

Communication


SUPERDRIVE PC Communication Kit (includes software & hardware accessories) KSD CFW09 $161

RS-232 Serial Interface KCS CFW09 86

Profi bus DP Communication Kit KFB-PD 1,045

DeviceNet Communication Kit KFB DN 897

Ethernet IP Communication Kit (V3.70 or higher) KFB EN 1,562

101


www.pamensky.com

CFW 09 - AccessoriesI/O Expansion Boards


I/O Exp. Board A with Encoder Input, Encoder Output, RS-485 Serial Interface, I4 bit A/D, I4 bit D/A’s, Digital

Inputs and Outputs + Thermistor (PTC) InputEBA.01 CFW09 $1,414

I/O Exp. Board A with RS-485 Serial Interface, Digital Inputs and Outputs + Thermistor (PTC) Input EBA.02 CFW09 334

I/O Exp. Board A with I4 bit A/D, I4 bit D/A’s, Digital Inputs and Outputs + Thermistor (PTC) Input EBA.03 CFW09 654

I/O Exp. Board B with Encoder Input, Encoder Output, RS-485 Serial Interface, Isolated Analog Input, Isolated

Analog Outputs, Digital Inputs and Outputs + Thermistor (PTC) InputEBB.01-CFW09 1,192

I/O Exp. Board B with Encoder Input with internal Power Supply - 12VDC, Digital Inputs and Outputs + Thermistor

(PTC) InputEBB.02-CFW09 561

I/O Exp. Board B with Isolated Analog Input, Isolated Analog Outputs, Digital Inputs and Outputs + Thermistor

(PTC) InputEBB.03-CFW09 667

I/O Exp. Board B with Encoder Input, 5V Power Supply for Encoder, Buffered Outputs for Encoder Signals, RS-

485 Serial Port, 24V Digital Input, 2 X 24V DC Digital Outputs, 0…10V/4-20mA Analog Input, 2 X 4-20mA Analog

Outputs and PTC Thermistor Input

EBB.04-CFW09 1,487

I/O Exp. Board B with 2 X 4-20mA Analog Outputs EBB.05-CFW09 435

I/O Exp. Board C with Encoder Input, 5-15VDC External Power Supply EBC1.01 CFW09 194

EBC1.02 CFW09 504

I/O Exp. Board C with Encoder Input with internal Power Supply - 12VDC EBC1.03 CFW09 523

I/O Exp. Board E with RS-485 Serial Interface, Digital or Thermistor (PTC) Input EBE.01 CFW09 192

PLC/Motion Control Board PLC1.01 957

PLC/Motion Control Board with Communication Capabilities PLC2.00 1,148

Through Surface Mounting


Kit for Through Surface Mounting - Size 3 CFW09KMFM3 $16

Kit for Through Surface Mounting - Size 4 CFW09KMFM4 20





101


www.pamensky.com

CFW 09 - Technical Data

Power Supply

Voltage Three-phase:

220-230 V: 220/230 V (+10% -15%)

380-480 V: 380/400/415/440/460/480 V (+10% - 15%)

500-600 V: 525/575/600 V (+10% - 15%)

500-690 V: 525/575/600 (+10% - 15%) /690 V

Frequency 50 / 60 Hz +/- 2 Hz (48 ... 62 Hz)

Phase Unbalance Up to 3%

Cos (Displacement Power Factor) Greater Ihan 0.98 at full load

Enclosure

Degree of ProtectionNEMA 1/IP20 (sizes 1...8 and 8E), IP20 (sizes 9,10 and 10E)

NEMA 4X / IP56 (modules up to 10HP)

Finishing ColorPlastic Cover - Light Gray PANTONE 413 C (sizes 1 and 2)

Metallic Cover and Sides - Light Gray RAL 7032 (sizes 3 to 10)

Base - Dark Gray RAL 7022 (sizes 3 to 10)

Control

Power Supply Switched Mode Power Supply Fed from the DC Link

Microprocessor 32 bit RISC Technology

PWM TechniqueSVM Sine wave PWM (Space Vector Modulation)

Software Implemented Current fl ux and Speed Regulators (Full DigitaI)

Control Modes

V / F

Sensorless Vector (without encoder)

Vector with Encoder

Switching Frequency 1.25 / 2.5 / 5.0 / 10 kHz

Frequency Range0...1020 Hz for V / Hz Control

0...408 Hz for Vector Control

Overload Capacity150% for 60 seconds every 10 minutes

180% for 1 second every 10 minutes

Effi ciency Greater than 97% at full load

Performance

Speed Control

V / F Mode

Regulation (with Slip Compensation) : 1% 01 Motor Rated Speed

Resolution: 1 rpm (Keypad Reference)

Speed Regulation Range: 1: 20

Sensorless

Vector Mode

Regulation: 0.5% of Motor Rated Speed

Resolution: 1 rpm (Keypad Reference)

Speed Regulation Range: 1:100

Encoder Vector

Mode

Regulation with:

10 bit Analogy Reference: +1- 0.1% 01 Motor Rated Speed

14 bit Analogy Reference: +- 0.01% 01 Motor Rated Speed

Digital Reference (Ex: Keypad): + / - 0.01 % of Motor Rated Speed

Speed Regulation Range: Down to 0 rpm

Torque Control Vector ModesRegulation: + - 10% of Motor Rated Torque

Range: O ... 150% 01 Motor Rated Torque

Control Inputs

Analog

2 Programmable Differential Input (10 bit) : 0...10 V 0...20 mA or 4...20 mA

1 Programmable Bipolar Input (14 bit): -10 ... + 10 V 0...20 mA or 4...20 mA

1 Programmable Isolated Input (10 bit) : O ... 10 V 0...20 mA or 4...20 mA

Digital

6 Programmable Isolated Input: 24 Vdc

1 Programmable Isolated Input: 24 Vdc

1 Programmable Isolated Input: 24 Vdc (for Motor PTC Thermistor)

Encorder 1 Isolated Differencial Encoder Signals Output: 5 ...15 Vdc External Power Supply

CommunicationSerial

RS-232 with KCS-GFW09 Kn - RS-485 Isolated with EBA or EBB Board

Johnson Contols-N2 (optional)

Fieldbus Modbus RTU Standard, Profi bus DP, DeviceNet, EtherNet / IP, DeviceNet Drive Profi le with KFB kits.

Safety Protections

DC Link Under Voltage Output Short Circuit

DC Link Over Voltage Output Ground Fault

Drive Over Temperature External Fault

Motor Over Temperature SeIf -diagnosis Fault

Output Over Current Programming Error

Motor Overload (i x t) Serial Communication Fault

Dynamic Braking Resistor Overload Motor or Encoder Connection Fault

CPU / EPROM Error ( watchdog) Power Supply Ohase Fault (30 A and above models)

Encoder Fault Keypad Connection Fault

Ambient

Temperature 0ºC (32ºF)...40ºC (104ºF), up to 50ºC (122ºF) with 2% / ºC (1,1% / ºF) output current derating

Humidity 5...90% Non Condensing

Altitude 0...1000m (3300ft), up to 4000m (13100ft) with 10% / 1000m (3% / 1000ft) output current derating

Conformities

EMC Directive 89 / 336 / EEC - EM 61800-3 Electromagnetie Compatible - Industrial Environment - EMC - Emission and Immunity

LVD 73 / 23 / EEC Low Voltage Directive

IEC 146 Semiconductor drive

UL 508C Power Conversion Enuinment

EN 50178 Electronic Equipment for Use in Power Installations

EN 61010 Safety Requirements for Electrical Equipament for Measurement Control and laboratory Use

Certifi cations

UL (USA) and cUL (CANADA) Underwriters laboratories Ine. USA

CE (EUROPE) Phoenix Test-Lab GmbH – Germany (Competent Body)

IRAM (ARGENTINA) Instituto Argentino de Normalización

C-Tiek (AUSTRALIA) 2250/1132383 Australian Communications Aulhority

101


www.pamensky.com


Keypad

Programming General Drive Functions Programming

Controls Start/Stop , Increase/Decrease Speed, JOG, FWD/REV and Local/Remote

Monitoring

Speed Reference (rpm) Oulput Current (A)

Motor Speed (rpm) Oulput Voltage (Vac)

Speed Proportional Value (Ex: ft/min) Drive Status

Output Frequency (Hz) Digital Inputs Status

DC Link Voftage (Vdc) Transistor Outputs Status

Motor Torque (%) Relay Outputs Status

Outout Power (kW) Analog Inputs Value

Hours Powered Up (h) Four Last Faults

Hours Enabled (h) Fault Messages

Control Features Standard

Keypad wilh LCD + LED displays (HMI-CFW09-LCD)

Password to protect drive programming

LCD display language selection: English, Spanish and Portuguese

Control mode selection (via parameter}: V / F. Sensorless Vector or Vector with Encoder

Fault auto-diagnosis and auto-reset

Parameters reset to factory or user default

Drive Self-tuning to motor and load (Vector Modes)

Specifi c unit indication ( Ex: l/s, t/h, %, etc. )

Motor slip compensation (V / F Mode)

Manual and automatic Torque Boost (V / F Mode)

Adjustable V / F Curve (V / F Mode)

Minimum and maximum speed limits

Output current limit

Adjustable motor overload protection

Digital gain and offset adjustments for the analog inputs

Digital gain adjustment for the analog outputs

JOG function

JOG + I JOG - Function (momentary speed increase/decrease)

COPY Function (Drive to Keypad or Keypad to Drive)

Comparison functions for lhe digital outputs: N* > Nx; N > Nx; N < Nx; N = O; N = N*; Is > Ix ; Is < Ix; T > Tx and T < Tx

Where: N = Motor speed; N* = Speed reference; Is = Output Current and T = Motor torque

Linear and S independent acceleration and deceleration ramps, two sets of ramps

DC Braking

Optimal Braking (Vector Modes)

Built-in dynamic braking transistor – Models up to 45A/220-230V and up to 30A/380-480V and up to 14A/500-600V

Multi-speed function (up to 8 preset speeds)

Speed Profi ling function

Hour meter and Wattrneter

Overlapping PID Regulator (for automatic control of level, pressure, fl ow, etc. )

FWD I REV selection

Local I Remate operation selection

Flying Start function (restart with the motor spinning)

Skip Speed (critical speed rejection)

Ride-Through (operation during momentary power loss)

Built-in dynamic braking transistor:

Models: 6 ... 45 A / 220 - 230 V and 36 ... 30 A / 380 - 480 V

FieldBus communication: Modbus RTU built-in

101


www.pamensky.com


Standard Features

• V/Hz control

• IP20 fi nger safe enclosure

• Single Phase 110-127V input voltage up to

1 HP

• Single Phase 200–240V input voltage up to

3 HP


• DSP controlled PWM output

• 2.5-15 kHz adjustable switching frequency


• Programmable relay output

• One isolated programmable analog input

• Diagnostic features: Over current, motor

overload, drive over temperature, output short


external fault

• Control features: Linear and S-Ramp

acceleration and deceleration, local / remote



minimum and maximum adjustable frequency

limits, adjustable output current limit, JOG


voltage, current, last 3 faults, heatsink

temperature and drive status, DC link voltage

• Ambient: 122°F (50°C), 3300 ft (1000 m)

altitude, 90% humidity, non-condensing

Applications

• Pumps

• Fans/Blowers

• Blowers

• Conveyors

• Rollout tables

The WEG CFW 10 VFD provides a robust drive

solution in a compact, easily mounted package.

A simplifi ed keypad and bright LED readout,

complete diagnostics and fully programmable

I/O makes the CFW 10 an ideal control device

when requiring an economical drive solution for

small motors.

101


www.pamensky.com


1 2 3 4 5 6 7 8 9 1110

Z-- -- -- --OE2024S0040CFW10


2. Output Rated Current 110-127V 200-240V

0016 = 1.6 A

0026 = 2.6 A

0040 = 4.0 A

0016 = 1.6A

0026 = 2.6A

0040 = 4.0A

0073 = 7.3A

0100 = 10.0A



4. Power Supply Voltage: 1112 = 110-127 V (Single-phase only)

2024 = 200-240 V


E = English

S = Spanish


O = With options

7. Control Card: blank = Standard

CL = clean

PL = plus (with potentiometer)

8. EMC Built-in Filter: blank = (not avaliable)

FA = with EMC fi lter (class A) –

Only for single-phase models (200-240V) models

9. Special Hardware: Blank = not provided

Hx = special hardware in version X

CP = Cold Plate heatsink version

10. Special Software: Blank = not provided

Sx = special software in version X


Example: CFW100040S2024ESZ

101


www.pamensky.com





Current

(A)

Motor

(HP)Frame

Weight

(lb)Degree of Protection

Dimensions

H x W xD (in)WEG Part Number List Price

1.6 0.25 1 2.0 IP20 5.20 x 3.74 x 4.76 CFW100016S1112ESZ $401

2.6 0.5 1 2.0 IP20 5.20 x 3.74 x 4.76 CFW100026S1112ESZ 432

4.0 1 2 3.3 IP20 6.34 x 4.53 x 4.80 CFW100040S1112ESZ 656



Current

(A)

Motor

(HP)Frame

Weight

(lb)Degree of Protection

Dimensions

(in)WEG Part Number List Price

1.6 0.25 1 2.0 IP20 5.20 x 3.74 x 4.76 CFW100016S2024ESZ $349

2.6 0.5 1 2.0 IP20 5.20 x 3.74 x 4.76 CFW100026S2024ESZ 375

4 1 1 2.0 IP20 5.20 x 3.74 x 4.76 CFW100040S2024ESZ 385

7.3 2 2 3.3 IP20 6.34 x 4.53 x 4.80 CFW100073S2024ESZ 571

10 3 3 4.0 IP20 7.46 x 4.53 x 4.80 CFW100100S2024ESZ 680

Power Supply

VoltageSingle phase 110…127V (+10%, -15%)

Single phase 200…240V (+10%, -15%)

Frequency 50 / 60Hz +/- 2Hz

Cos (Displacement Power Factor) Greater than 0.98

EnclosureDegree of Protection IP20

Control Mode Linear or Quadratic V/Hz

Control

Power Output 16 bit DSP

Sinusoidal PWM (Space Vector

Modulation)

Switching Frequency IGBT Transistors 2.5, 5, 10 or 15kHz

Frequency Range 2.5…15kHz Switching Frequency

Overload Capacity 0-300 Hz

Control Inputs

4 programmable isolated digital

outputs150% during 60 sec. every 10 min.

1 programmable differential analog input: 0-10V, 0-20mA or 4-20mA

Control Ouput 1 programmable realy outputs, one reversing (Form C) contact: 250V / 0.5A

Safety Protections

Motor over current DC link over voltage

Motor overload DC link under voltage

output phase-to-phase short circuit Drive over temperature

output phase-to-ground short circuit external fault

programming error

Ambient

Temperature 0…104F (40ºC), up to 122ºF (50ºC) with 2% / 1.8ºF (1ºC) output current derating

Humidity 5…90% Non Condensing

Altitude0…3300 ft (1000m), up to 13,200 ft (4000m) with 10% / 3300ft (1000m) output

current derating

Conformities

EMC Directive 89 / 336 / EEC Electromagnetic compatibility – Industrial Environment EMC – Emission and Immunity

ENC61800-3

LVD 73/23/EEC Low Voltage Directive

UL 508 C Power Conversion Equipment

Special Functions

Linear and “S” ramp accel and decel, local/remote control, FWD/REV selection, DC braking, manual and auto torque

boost, motor slip compensation, electronic pot, two skip frequencies, maximum and minimum adjustable frequency limits,

adjustable output current limit, 8 present speeds and JOG.

Keypad

3 digit display, 2 indication LEDs and 4 keys

Readouts for: output freqency (Hz), output current (A), output voltage (V), value proportional to frequency (Ex: RPM),

heatsink temperature, fault and status messages.

Mounting Surface with screws



101


www.pamensky.com

CFW 11 - System Variable Frequency Drive

Standard Features

• Plug and play philosophy (connect and

use) enables quick and easy installation of

accessories and options

• USB for computer connection for using

SUPERDRIVE G2 programming and

monitoring software

• Human-Machine Interface (HMI) with backlit

graphic display and soft-keys, greatly

facilitates inverter programming and operation

• DC link inductors (symetrically connected

to positive and negative DC link terminals)

enable compliance with IEC61000-3-12

standard requirements regarding harmonics,

(no need for external line reactance)

• Intelligent thermal management enables full

protection of IGBTs, monitoring of heatsink

and internal air temperature

• Automatic control of the heatsink fan with

speed sensor (additional protection) and

easily detachable from the unit for cleaning

and maintenance

• Normal Duty and Heavy Duty ratings to adapt

optimally to all kinds of loads

• Protection with failure and alarm warnings

• Motor overload protection in compliance with

IEC 60947-4-2/UL 508 C

• On board memory allows user to create

functions without the need to use an external

PLC (soft-PLC via IEC61131-3 programming

software)


• Guided start-up simplifi es initial user

programming.

• Real time clock

• TRACE / SCOPE function to assist with

the start-up and system diagnostics via

SUPERDRIVE G2

Optional Features

• Interface for incremental encoder 5 to 12Vdc

• Interface for RS-485 serial communication

(modbus)

• Interface for RS-232C serial communication

• CAN interface

• Profi bus DP interface

• PLC functions; IEC programming

• Devicenet 4 interface

• Ethernet IP interface

• Blind cover for slot HMI

• Frame for remote HMI

• Conduit kit

• Optimal Braking®

• IP20

Factory Options

• Safety Stop

• RFI Filter

• 24 VDC power input option for control section

The WEG CFW 11 inverters use Plug and Play technology

to recognize and confi gure accessories providing easy and

safe operation. Programming is simpler using the standard

USB port. Soft PLC lets the user create functions without

the need for an external PLC.

ency Driv

101


www.pamensky.com


1 32 654 7 8 9 13121110

-- -- -- -- -- ------S4T- 0016 CFW11 Z


2. Type of Construction: Blank = Inverter in cabinet

M = Inverter with modular construction to meet elevated powers, “modular drive” line

3. Output Rated Current 220-240V 380-480V 500-690V

0007 = 7 A

0010 = 10 A

0013 = 13 A

0016 = 16 A

0024 = 24 A

0028 = 28 A

0033 = 33 A

0045 = 45 A

0054 = 54 A

0070 = 70 A

0086 = 86 A

0105 = 105 A

0142 =142 A

0180 = 180 A

0211 = 211 A

0003 = 3 A

0005 = 5 A

0007 = 7 A

0010 = 10 A

0013 = 13 A

0017 = 17 A

0024 = 24 A

0031 = 31 A

0038 = 38 A

0045 = 45 A

0058 = 58 A

0070 = 70 A

0088 = 88 A

0105 = 105 A

0142 = 142 A

0180 = 180 A

0211 = 211 A

0242 = 242 A

0312 = 312 A

0370 = 370 A

0477 = 477 A

0515 = 515 A

0601 = 601 A

0720 = 720 A

0002 = 2.9 A

0004 = 4.2 A

0007 = 7 A

0010 = 10 A

0012 = 12 A

0017 = 17 A

0022 = 22 A

0027 = 27 A

0032 = 32 A

0044 = 44 A

0053 = 53 A

0063 = 63 A

0080 = 80 A

0107 = 107 A

0125 = 125 A

0150 = 150 A

0170 = 170 A

0216 = 216 A

0289 = 289 A

0315 = 315 A

0365 = 365 A

0435 = 435 A



T = three-phase


5. Power Supply Voltage: 2 = 200-240 V

4 = 380-480 V

5 = 500-600 V

6 = 660-690 V


O = With options

7. Enclosure: Blank = factory standard

Sizes A, B and C: IP21

D: Nema 1/IP20

N1 = Nema 1

21 = IP21


blank = standard (with HMI of LED´S + LCD)

IC = Without HMI

9. Braking: blank = standard

(Sizes A, B, C and D: built-in braking IGBT)

F = Standard product including Brake Chopper

DB = Dynamic Braking (Factory Option)

10. RFI Filter (Not Applicable to CFW-11M Models):

Blank = standard

FA = Category C3 internal RFI fi lter

11. Safety Stop: Blank = standard (without safety stop function)

Y = with safety stop function according to EN-954-1 category 3

12. External Electronic Supply 24 Vdc (not applicable to models CFW-11M):

Blank = factory standard:

model CFW-11 (without) ; model CFW-11M (with)

12. Special Hardware: Blank = factory standard (without)

H1 = special hardware nr. 1

13. Special Software: Blank = factory standard (without)

S1 = special software nr. 1


Example: CFW110016T4SZ

14 15

4 Vdc icable to

CFW-11M):

model CFW-11 (without) ; model CFW-11M (with)

Hardware: Blank = factory standard (without)

H1 = special hardware nr. 1

Software: Blank = factory standard (without)

S1 = special software nr. 1

art Number: Z

: CFW110016T4SZ

101


www.pamensky.com






Current

(A)Built-In

Dynamic

Braking


FrameWeight

(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

Part NumberList

PriceND* HD*

ND* HD* HP HP

6 5 Yes 1.5 1 A 12.6 NEMA 1 12.04 x 5.71 x 8.94 CFW110006B2ON1Z $1,936

7 7 Yes 2 2 A 12.6 NEMA 1 12.04 x 5.71 x 8.94 CFW110007B2ON1Z 1,996

10 10 Yes 3 3 A 13.4 NEMA 1 12.04 x 5.71 x 8.94 CFW110010S2ON1Z 2,117



Current

(A)Built-In

Dynamic

Braking


FrameWeight

(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

Part NumberList

PriceND* HD*

ND* HD* HP HP

6 5 Yes 1.5 1 A 12.6 NEMA 1 12.04 x 5.71 x 8.94 CFW110006B2ON1Z $1,936

7 7 Yes 2 2 A 12.6 NEMA 1 12.04 x 5.71 x 8.94 CFW110007B2ON1Z 1,996

7 5.5 Yes 2 1.5 A 12.6 NEMA 1 12.04 x 5.71 x 8.94 CFW110007T2ON1Z 1,851

10 8 Yes 3 2 A 12.6 NEMA 1 12.04 x 5.71 x 8.94 CFW110010T2ON1Z 1,967



24 20 Yes 7.5 6 B 20.1 NEMA 1 13.82 x 7.45 x 8.94 CFW110024T2ON1Z 2,740

28 24 Yes 10 7.5 B 20.1 NEMA 1 13.82 x 7.45 x 8.94 CFW110028T2ON1Z 2,794

33.5 28 Yes 12.5 10 B 20.1 NEMA 1 13.82 x 7.45 x 8.94 CFW110033T2ON1Z 3,182

45 36 Yes 15 12.5 C 41.7 NEMA 1 17.64 x 8.66 x 11.51 CFW110045T2ON1Z 3,583

54 45 Yes 20 15 C 41.7 NEMA 1 17.64 x 8.66 x 11.51 CFW110054T2ON1Z 4,410


86 70 Yes 30 25 D 71.7 NEMA 1 19.82 x 11.81 x 12.00 CFW110086T2SZ 6,514


142 115 No 50 40 E 143.3 NEMA 1 26.60 x 13.20 x 14.10 CFW110142T2ON1Z 12,249



* ND - Normal Duty

• 110% during 60 seconds every 10 minutes


* HD - Heavy Duty





Current

(A)Built-In

Dynamic

Braking


FrameWeight

(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

Part NumberList

PriceND* HD*

ND* HD* HP HP

3.6 3.6 Yes 2 2 A 5.7 NEMA 1 12.04 x 5.71 x 8.94 CFW110003T4ON1Z $1,903


7 5.5 Yes 4 3 A 5.9 NEMA 1 12.04 x 5.71 x 8.94 CFW110007T4ON1Z 2,091


13.5 11 Yes 7.5 6 A 6.3 NEMA 1 12.04 x 5.71 x 8.94 CFW110013T4ON1Z 2,265

17 13.5 Yes 10 7.5 B 9.1 NEMA 1 13.82 x 7.45 x 8.94 CFW110017T4ON1Z 2,745

24 19 Yes 15 12.5 B 9.7 NEMA 1 13.82 x 7.45 x 8.94 CFW110024T4ON1Z 3,324

31 25 Yes 20 15 B 10.4 NEMA 1 13.82 x 7.45 x 8.94 CFW110031T4ON1Z 4,120



58.5 47 Yes 40 30 C 18.9 NEMA 1 17.64 x 8.66 x 11.51 CFW110058T4ON1Z 7,093

70.5 61 Yes 50 40 D 32.5 NEMA 1 19.82 x 11.81 x 12.00 CFW110070T4SZ 7,723






242 211 No 200 150 F 308.6 IP20 48.58 x 16.93 x 14.17 CFW110242T4SZ 21,719

312 242 No 250 200 F 308.6 IP20 48.58 x 16.93 x 14.17 CFW110312T4SZ 25,735

370 312 No 300 250 F 308.6 IP20 48.58 x 16.93 x 14.17 CFW110370T4SZ 26,893

477 370 No 400 300 F 308.6 IP20 48.58 x 16.93 x 14.17 CFW110477T4SZ 33,217

515 477 No 450 400 G 474.0 IP20 49.76 x 21.06 x 16.77 CFW110515T4SZ 38,456

601 515 No 500 450 G 474.0 IP20 49.76 x 21.06 x 16.77 CFW110601T4SZ 43,866

720 560 No 600 450 G 474.0 IP20 49.76 x 21.06 x 16.77 CFW110720T4SZ 48,740

101


www.pamensky.com

CFW 11 - Table of Products500-600V - Three Phase


Current

(A)Built-In

Dynamic

Braking


FrameWeight

(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

Part NumberList

PriceND* HD*

ND* HD* HP HP

2.9 2.7 Standard 2 2 B 20.1 NEMA 1 12.4 x 7.5 x 8.9 CFW110002T5ON1NFZ $2,818

4.2 3.8 Standard 3 3 B 20.1 NEMA 1 12.4 x 7.5 x 8.9 CFW110004T5ON1NFZ 2,895

7.0 6.5 Standard 5 5 B 20.1 NEMA 1 12.4 x 7.5 x 8.9 CFW110007T5ON1NFZ 3,074

10 9.0 Standard 7.5 7.5 B 20.1 NEMA 1 12.4 x 7.5 x 8.9 CFW110010T5ON1NFZ 3,128

12 10 Standard 10 10 B 20.1 NEMA 1 12.4 x 7.5 x 8.9 CFW110012T5ON1NFZ 3,283

17 17 Standard 15 15 B 20.1 NEMA 1 12.4 x 7.5 x 8.9 CFW110017T5ON1NFZ 3,412



Current

(A)Built-In

Dynamic

Braking


FrameWeight

(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

Part NumberList

PriceND* HD*

ND* HD* HP HP

22 19 Optional 20 15 D 75 NEMA 1 21.7 x 11.8 x 12.0 CFW110022T6ONBZ $5,072

27 22 Optional 25 20 D 75 NEMA 1 21.7 x 11.8 x 12.0 CFW110027T6ONBZ 5,410



53 44 Optional 50 40 E 141 NEMA 1 26.6 x 13.2 x 14.1 CFW110053T6ON1NBYZ 10,572






170 150 Standard 150 150 F 370 IP20 48.6 x 16.9 x 14.2 CFW110170T6ONBYZ 25,820



315 289 Standard 300 300 G 569 IP20 49.8 x 21.1 x 16.8 CFW110315T6ONBYZ 43,846





* ND - Normal Duty



* HD - Heavy Duty



101


www.pamensky.com

CFW 11 - Table of Products - Dynamic Braking200-240V - Three Phase - with Dynamic Braking


Current

(A)Built-In

Dynamic

Braking


FrameWeight

(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

Part NumberList

PriceND* HD*

ND* HD* HP HP

142 115 Yes 50 40 E 143.3 NEMA 1 26.60 x 13.20 x 14.10 CFW110142T2ON1DBZ $13,102

180 142 Yes 60 50 E 143.3 NEMA 1 26.60 x 13.20 x 14.10 CFW110180T2ON1DBZ 18,232


380-480V - Three Phase - with Dynamic Braking


Current

(A)Built-In

Dynamic

Braking


FrameWeight

(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

Part NumberList

PriceND* HD*

ND* HD* HP HP

105 88 Yes 75 60 E 143.3 NEMA 1 26.60 x 13.20 x 14.10 CFW110105T4ON1DBZ $11,109






* ND - Normal Duty



* HD - Heavy Duty



p g p p ( p ), g

m other manufacturers, specify the VFD through the motor rated current.

500-690V - Three Phase - with RFI Filter, Safety Stop and Dynamic Braking


Current

(A)Built-In

Dynamic

Braking


FrameWeight

(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

Part NumberList

PriceND* HD*

ND* HD* HP HP

22 19 Yes 20 15 D 75 IP20 21.7 x 11.8 x 12.0 CFW110022T6OYZ $6,248

27 22 Yes 25 20 D 75 IP20 21.7 x 11.8 x 12.0 CFW110027T6OYZ 6,667



53 44 Yes 50 40 E 141 IP20 26.6 x 13.2 x 14.1 CFW110053T6OYZ 12,943






101


www.pamensky.com

CFW 11 - AccessoriesI/O Expansion

Description Slot Part Number List Price

2 14-bit analog inputs in voltage or current

2 digital inputs

2 14-bit analog outputs in voltage or current

2 open collector type digital outputs

1 IOA-01 $1,052

2 isolated 12-bit analog inputs

2 digital inputs

2 isolated 11-bit analog outputs in voltage or current


1 IOB-01 561

8 Digital Inputs

4 Digital Outputs

(Use with Soft PLC)

1 IOC-01 419

8 Digital Inputs

8 Open Collector Digital Outputs

(Use with Soft PLC)

1 IOC-02 386

5 PTC type temperature sensor Input 1 IOE-01 626

5 PT100 type temperature sensor Input 1 IOE-02 1,631

5 KTY84 type temperature sensor Input 1 IOE-03 809

Interface with Encoder


Incremental encoder module

5 to 12 Vdc

100 kHz

With encoder signal repeater

2 ENC-01 $461


5 to 12 Vdc

100 kHz

2 ENC-02 404

Communication


RS-485 Serial Communication Module (Modbus-RTU) 3 RS485-01 $212

RS-232C Serial Communication Module (Modbus-RTU) 3 RS232-01 161

RS-232C Serial Communication Module (Modbus-RTU) with DIP switch for fl ash memory prog. 3 RS232-02 179

CAN/RS-485 Interface Module (CANopen, DeviceNet and Modbus) 3 CAN/RS485-01 453

CAN Interface Module (CANopen and DeviceNet) 3 CAN-01 378

Profi bus DP-V1 Interface Module 3 PROFIBUS DP-01 512

Profi bus DP Interface Module 4 PROFDP-05 1,138

DeviceNet Interface Module 4 DEVICENET-05 1,138

EtherNet/IP Interface Module 4 ETHERNET/IP-05 1,138

RS-232 Interface Module (passive) (Modbus-RTU) 4 RS232-05 277


Modbus - TCP/IP interface module 4 MODBUSTCP-05 1,680

Profi net interface module 4 PROFINETIO-05 1,939

PLC Module


PLC functions; Ladder programming; electronic ggearbox; 9 digital inputs; 3 dry-contact digital

outputs; 3 open-collector digital ouputs; 1 analog input (14 bits); 2 analog outputs (14 bits); 2

encoder interfaces; RS-485 Modbus-RTU interface; CAN interface (CANopen, CANopen master/

slave).

1,2,3 PLC11-01 $1,960


outputs; 3 open-collector digital ouputs; 2 encoder interfaces; RS-485 Modbus-RTU interface; CAN

interface (CANopen, CANopen master/slave).

1,2,3 PLC11-02 1,215

101


www.pamensky.com

CFW 11 - AccessoriesKeypad Accessories and Cable for HMI


CFW 11 Keypad HMI-01 $318

Frame for keypad remote assembly, IP56 RHMIF-01 60

Blank cover for keypad slot HMID-01 47

1m (3.3ft) Remote Keypad Cable IHM CAB-RS-1M 47


3m (10ft) Remote Keypad Cable IHM CAB-RS-3M 57


7.5m (25ft) Remote Keypad Cable IHM CAB-RS-7.5M 78


Shielding Kits and Exctractable Mounting Kits


Power cable shielding kit for frame A PCSA-01 $42

Power cable shielding kit for frame B PCSB-01 44

Power cable shielding kit for frame C PCSC-01 47

NEMA 1 Kits


NEMA 1 - conduit kit kit for frame A KN1A-01 $73

NEMA 1 - conduit kit kit for frame B KN1B-01 86

NEMA 1 - conduit kit kit for frame C KN1C-01 99

Dynamic Braking


External Dynamic Braking Module DBW03 $5,904

101


www.pamensky.com


Power Supply and

Power Range

Voltage and

power range

Single-Phase 200-240 V: 200/220/230/240 V (+10%/-15%)

Three-Phase

200-240 V: 200/220/230/240 V (+10%/-15%)

380-480 V: 380/400/415/440/460/480 V (+10%/-15%)

500-690 V: 525/575/600/690 V (+10%/-15%)

Frequency 50 / 60 Hz +-2% (48 to 63 Hz)

Displacement factor Greater than 0.98

Effi ciency Greater than 0.97

Motor

Voltage Three Phase, 0 up to power supply voltage

Frequency 0 to 400 Hz

Switching

Frequency

Standard: 5kHz

Options available: 2.5 / 5 / 10 kHz

Overload

Normal Duty Cycle 110% for 1 min every 10min

150% for 3 sec every 10min

Heavy Duty Cycle150% for 1 min every 10min


Time (ramps)Acceleration 0 to 999 seconds

Deceleration 0 to 999 seconds

Performance

Scalar (V/f)

Speed

Control

Regulation: 1% of rated speed

Speed variation range: 1:20

Voltage Vector

(VVW)



Sensorless VectorRegulation: 0.5% of rated speed


Vector with

Encoder

(with accessory

ENC-01 or ENC-

02)

Regulation: +/- 0.01% of rated speed with 14-bit analog input (IOA)

Regulation: +/- 0.01% of rated speed with digital reference (keyboard, serial

fi eldbus, electronic potentiometer, multispeed)

Regulation: +/- 0.05% of rated speed with 12-bit analog input

Torque

Control

Range: 10 to 180%

Regulation: +/- 5% of rated torque

Sensorless VectorRange: 20 to 180%

Regulation: +/-10% of rated torque (above 3 Hz)

Inputs and

Outputs (I/Os)

in the Standard

Product

Inputs

Digital 6 isolated inputs, 24 Vdc, programmable functions

Analog

2 differential inputs isolated by differential amplifi er, programmable functions

Resolution:

- AI1: 12 bits

- AI2: 11 bits + signal

Signals: (0 to 10) V, (0 to 20) mA or (4 to 20) mA

Impedance:

- 400 kΩ for signal (0 to 10) V

- 500 Ω for signal (0 to 20) mA or (4 to 20) mA

Outputs

Relay 3 relays with NA/NF (NO/NC) contacts, 240 Vac / 1A, programmable functions

Analog

2 isolated outputs, programmable functions

Resolution: 11 bits

Load:

0 to 10 V: RL >= 10 kΩ

0 to 20 mA or 4 to 20 mA: RL < 500Ω

Available supply to user 24 Vdc + -20%, 500 mA

Environment

Temperature of

Operation

-10 to 50°C for frame Size A,B,C and D; -10 to 45°C for frame Size E and F; -10 to 40°C for frame Size G with 720A

Up to 60°C with current derating (2% for each 1°C above 50°C)

Humidity 5 to 90% without condensation

Altitude 0 to 1000 meters

Up to 4000 meters with current reduction (1% for every 100 meters above 1000 meters)

Degree of

Protection

IP21 Standard for frame sizes A, B, C. For frame size D the top cover kit has to be added. Frame Sizes E, F and G option not available

IP20 Standard for frame sizes D, E, F and G. Frame Sizes A, B and C the top cover has to be removed.

NEMA1 Standard for frame Size D. Optinal for frame sizes A, B, C, E, F and G

IP54 Frame Sizes 1, 2 and 3

Braking Methods

Rheostatic BrakingSupply available to user

External braking resistor (not provided)

Optimal Braking Does not need braking resistor

DC Braking Direct current applied to the motor

101


www.pamensky.com


Communication

Profi bus DPPROFIBUS DP-01 (slot 3)

PROFDP-05 (slot 4)

DeviceNet

CAN/RS485-01 (slot 3)

CAN-01 (slot 3)

DEVICENET-05 (slot4)

CANopenCAN/RS485-01 (slot 3)

CAN-01 (slot 3)

CANopen Master/Slave PLC11-01 (slot 1/2/3)

EtherNet TCP/IP ETHERNET/IP-05 (slot 4)

RS485 - ModBus RTU

RS485-01

CAN/RS485-01

RS485-05

RS232 - ModBus RTURS232-01

RS232-05

USB

Built-into the standard product

Communication with SUPERDRIVE G2 Software

Communication with WLP Software used for programming and monitoring the Soft

PLC function and the PLC11-01 accessory

Protections

Overcurrent / short circuit

Under / overvoltage in the power circuit

Phase loss

Overtemperature in the inverter (IGBTs, rectifi er and internal air in the electronic cards)

Overtemperature in the motor

Overload in the braking resistor

Overload in the IGBTs

Overload in the motor

Fault / external alarm

Fault in the CPU or memory

Phase-to-ground short circuit at the output

Fault in the heatsink fan

Overspeed of motor

Incorrect connection of encoder

Safety Standards

UL 508C

Power conversion equipment

UL 840

Insulation coordination including clearances and creepage distances for electrical equipment

EN 61800-5-1

Safety requirements electrical, thermal and energy

EN 50178

Electronic equipment for use in power installations

EN 60204-1

Safety of machinery.

Electrical equipment of machines.

Part 1: General requirements.

Note: In order to have a machine in conformity with this norm, the machine manufacturer is responsible for the installation of an emergency shutdown device and

an equipment for network sectioning

EN 60146 (IEC 146)

Semiconductor converters

EN 61800-2

Adjustable speed electrical power drive systems

Part 2: General requirements – rating specifi cations for low voltage adjustable frequency a.c. power drive systems

Mechanical

Construction Stds.

EN 60529 - Degrees of protection provided by enclosures (IP Code)

UL 50 - Enclosures for electrical equipment

Electromagnetic

Compatibility

Standards

EN 61800-3 - Adjustable speed electrical power drive systems

Part 3: EMC product standard including specifi c test methods

EN 55011 - Limits and methods of measurement of radio disturbance characteristics of industrial, scientifi c and medical (ISM)

radio-frequency equipment

CISPR 11 - Industrial, scientifi c and medical (ISM)radio-frequency equipment Electromagnetic disturbance characteristics.

Limits and methods of measurement

EN 61000-4-2 - Electromagnetic Compatibility Standards (EMC)

Part 4: Testing and measurement techniques

Section 2: Electrostatic discharge immunity test



Section 3:Radiated, radiofrequency, electromagnetic fi eld immunity test



Section 4: Electrical fast transient / burst immunity test



Section 5: Surge immunity test



Section 6: Immunity to conducted disturbances, induced by radio-frequency fi elds

101


www.pamensky.com

CFW 11M - Modular Variable Frequency Drive

The CFW 11M is the new generation of WEG frequency inverters for large power ranges. It ranges

from 350 to 2500HP rated at 380-480V / 500-600V / 660-690V with the option for 6 or 12 pulses.

Standard Features

• Plug and play philosophy (connect and

use) enables quick and easy installation of

accessories and options

• USB for computer connection for using

SUPERDRIVE G2 programming and

monitoring software

• Human-Machine Interface (HMI) with backlit

graphic display and soft-keys, greatly

facilitates inverter programming and operation

• Intelligent thermal management enables full

protection of IGBTs, monitoring of heatsink

and internal air temperature

• Automatic control of the heatsink fan with

speed sensor (additional protection) and

easily detachable from the unit for cleaning

and maintenance

• Normal Duty and Heavy Duty ratings to adapt

optimally to all kinds of loads

• Protection with failure and alarm warnings

• Motor overload protection in compliance with

IEC 60947-4-2/UL 508 C

• On board memory allows user to create

functions without the need to use an external

PLC (soft-PLC via IEC61131-3 programming

software)

• Guided start-up simplifi es initial user

programming

• Real time clock

• TRACE / SCOPE function to assist with

the start-up and system diagnostics with

SUPERDRIVE G2

Optional Features

• Interface for incremental encoder 5 to 12Vdc

• Interface for RS-485 serial communication

(modbus)

• Interface for RS-232C serial communication

• CAN interface

• Profi bus DP interface

• PLC functions; IEC programming

• Devicenet 4 interface

• Ethernet IP interface

• Blind cover for slot HMI

• Frame for remote HMI

• Conduit kit

101


www.pamensky.com

CFW 11M - Specifi cation Table380-480V - Three Phase


Current

(A)


Degree of

Protection

6 Pulse 12 Pulse

Part NumberNormal Duty (ND) Heavy Duty (HD) Dimensions (in)

H x W x D

Dimensions (in)

H x W x DND* HD* HP KW HP KW

600 515 500 370 450 330 IP41 90.55 x 55.12 x 31.50 90.55 x 86.61 x 31.50 AFW11M0600T4Z

1140 979 900 700 800 590 IP41 90.55 x 55.12 x 31.50 90.55 x 86.61 x 31.50 AFW11M1140T4Z

1710 1468 1400 1050 1200 900 IP41 90.55 x 70.87 x 31.50 90.55 x 102.36 x 31.50 AFW11M1710T4Z

2280 1957 1800 1400 1600 1200 IP41 90.55 x 78.74 x 31.50 90.55 x 110.24 x 31.50 AFW11M2280T4Z

2850 2446 2300 1750 2000 1500 IP41 90.55 x 102.36 x 31.50 90.55 x 125.98 x 31.50 AFW11M2850T4Z



Current

(A)


Degree of

Protection

6 Pulse 12 Pulse


H x W x D

Dimensions (in)


470 418 500 370 400 300 IP41 90.55 x 55.12 x 31.50 90.55 x 86.61 x 31.50 AFW11M0470T5Z

893 794 900 700 800 590 IP41 90.55 x 55.12 x 31.50 90.55 x 86.61 x 31.50 AFW11M0893T5Z

1339 1191 1400 1050 1250 900 IP41 90.55 x 70.87 x 31.50 90.55 x 102.36 x 31.50 AFW11M1340T5Z

1786 1588 1800 1400 1600 1200 IP41 90.55 x 78.74 x 31.50 90.55 x 110.24 x 31.50 AFW11M1786T5Z

2232 1985 2300 1750 2000 1500 IP41 90.55 x 102.36 x 31.50 90.55 x 125.98 x 31.50 AFW11M2232T5Z

660-690V - Three Phase *CE certifi cation only


Current

(A)


Degree of

Protection

6 Pulse 12 Pulse


H x W x D

Dimensions (in)


427 340 500 370 400 300 IP41 90.55 x 55.12 x 31.50 90.55 x 55.12 x 31.50 AFW11M0427T6Z

811 646 1000 750 800 590 IP41 90.55 x 55.12 x 31.50 90.55 x 62.99 x 31.50 AFW11M0811T6Z

1216 969 1500 1100 1250 900 IP41 90.55 x 62.99 x 31.50 90.55 x 102.36 x 31.50 AFW11M1217T6Z

1622 1292 2000 1500 1600 1200 IP41 90.55 x 78.74 x 31.50 90.55 x 110.24 x 31.50 AFW11M1622T6Z

2028 1615 2500 1850 2000 1500 IP41 90.55 x 94.49 x 31.50 90.55 x 125.98 x 31.50 AFW11M2028T6Z

101


www.pamensky.com

CFW 11M - AccessoriesI/O Expansion


2 14-bit analog inputs in voltage or current

2 digital inputs

2 14-bit analog outputs in voltage or current


1 IOA-01 $1,052

2 isolated 12-bit analog inputs

2 digital inputs

2 isolated 11-bit analog outputs in voltage or current


1 IOB-01 561

8 Digital Inputs

4 Digital Outputs

(Use with Soft PLC)

1 IOC-01 419

8 Digital Inputs

8 Open Collector Digital Outputs

(Use with Soft PLC)

1 IOC-02 386

5 PTC type temperature sensor Input 1 IOE-01 626

5 PT100 type temperature sensor Input 1 IOE-02 1,631

5 KTY84 type temperature sensor Input 1 IOE-03 809

Interface with Encoder



5 to 12 Vdc

100 kHz

With encoder signal repeater

2 ENC-01 $461


5 to 12 Vdc

100 kHz

2 ENC-02 404

Communication


RS-485 Serial Communication Module (Modbus-RTU) 3 RS485-01 $212

RS-232C Serial Communication Module (Modbus-RTU) 3 RS232-01 161

RS-232C Serial Communication Module (Modbus-RTU) with DIP switch for fl ash memory prog. 3 RS232-02 179

CAN/RS-485 Interface Module (CANopen, DeviceNet and Modbus) 3 CAN/RS485-01 453

CAN Interface Module (CANopen and DeviceNet) 3 CAN-01 378

Profi bus DP-V1 Interface Module 3 PROFIBUS DP-01 512

Profi bus DP Interface Module 4 PROFDP-05 1,138

DeviceNet Interface Module 4 DEVICENET-05 1,138

EtherNet/IP Interface Module 4 ETHERNET/IP-05 1,138



Modbus - TCP/IP interface module 4 MODBUSTCP-05 1,680

Profi net interface module 4 PROFINETIO-05 1,939

PLC Module



outputs; 3 open-collector digital ouputs; 1 analog input (14 bits); 2 analog outputs (14 bits); 2

encoder interfaces; RS-485 Modbus-RTU interface; CAN interface (CANopen, CANopen master/

slave).

1,2,3 PLC11-01 $1,960


outputs; 3 open-collector digital ouputs; 2 encoder interfaces; RS-485 Modbus-RTU interface; CAN

interface (CANopen, CANopen master/slave).

1,2,3 PLC11-02 1,215

101


www.pamensky.com

CFW 11M - AccessoriesKeypad Accessories and Cable for HMI











Dynamic Braking


External Dynamic Braking Module DBW03 $5,904

101


www.pamensky.com

CFW 11M - Technical Data

Power Supply and

Power Range

Voltage and

power rangeThree-Phase

380-480V: 380/400/415/440/480 V (+10%/-15%)

500-600V: 525/575/600 V (+10%/-15%)

660-690V: 660 (+10%/-15%) /690 V

Frequency 50 / 60 Hz +-2% (48 to 63 Hz)



Motor

Voltage Three Phase, 0 up to power supply voltage

Frequency 0 to 400 Hz

Switching

Frequency

Standard: 5kHz

Options available: 2.5 / 5 / 10 kHz

Overload

Normal Duty Cycle 110% for 1 min every 10min


Heavy Duty Cycle150% for 1 min every 10min


Time (ramps)Acceleration 0 to 999 seconds

Deceleration 0 to 999 seconds

Performance

Scalar (V/f)

Speed

Control



Voltage Vector

(VVW)



Sensorless VectorRegulation: 0.5% of rated speed


Vector with

Encoder

(with accessory

ENC-01 or ENC-

02)

Regulation: +/- 0.01% of rated speed with 14-bit analog input (IOA)

Regulation: +/- 0.01% of rated speed with digital reference (keyboard, serial

fi eldbus, electronic potentiometer, multispeed)

Regulation: +/- 0.05% of rated speed with 12-bit analog input

Torque

Control

Range: 10 to 180%

Regulation: +/- 5% of rated torque


Regulation: +/-10% of rated torque (above 3 Hz)

Inputs and

Outputs (I/Os)

in the Standard

Product

Inputs

Digital 6 isolated inputs, 24 Vdc, programmable functions

Analog

2 differential inputs isolated by differential amplifi er, programmable functions

Resolution:

- AI1: 12 bits

- AI2: 11 bits + signal

Signals: (0 to 10) V, (0 to 20) mA or (4 to 20) mA

Impedance:

- 400 kΩ for signal (0 to 10) V

- 500 Ω for signal (0 to 20) mA or (4 to 20) mA

Outputs

Relay 3 relays with NO/NC contacts, 240 Vac / 1A, programmable functions

Analog

2 isolated outputs, programmable functions

Resolution: 11 bits

Load:

0 to 10 V: RL >= 10 kΩ

0 to 20 mA or 4 to 20 mA: RL < 500Ω

Available supply to user 24 Vdc + -20%, 500 mA

Environment

Temperature of

Operation

- 10ºC to 50ºC

Up to 60°C with current derating (2% for each 1°C above 50°C)

Humidity 5 to 90% without condensation

Altitude 0 to 1000 meters

Up to 4000 meters with current reduction (1% for every 100 meters above 1000 meters)

Degree of

ProtectionIP41

Braking Methods

Rheostatic BrakingSupply available to user

External braking resistor (not provided)

Optimal Braking Does not need braking resistor

DC Braking Direct current applied to the motor

101


www.pamensky.com

CFW 11M - Technical Data

Communication

Profi bus DP PROFIBUS DP (slot 4)

DeviceNet

CAN/RS485-01 (slot 3)

CAN-01 (slot 3)

DEVICENET-05 (slot4)

CANopenCAN/RS485-01 (slot 3)

CAN-01 (slot 3)

CANopen Master/Slave PLC11-01 (slot 1/2/3)

EtherNet TCP/IP ETHERNET/IP-05 (slot 4)

RS485 - ModBus RTU

RS485-01

CAN/RS485-01

RS485-05

RS232 - ModBus RTURS232-01

RS232-05

USB

Built-into the standard product

Communication with SUPERDRIVE G2 Software

Communication with WLP Software used for programming and monitoring the Soft

PLC function and the PLC11-01 accessory

Protections

Overcurrent / short circuit

Under / overvoltage in the power circuit

Phase loss

Overtemperature in the inverter (IGBTs, rectifi er and internal air in the electronic cards)

Overtemperature in the motor

Overload in the braking resistor

Overload in the IGBTs

Overload in the motor


Fault in the CPU or memory

Phase-to-ground short circuit at the output

Fault in the heatsink fan

Overspeed of motor

Incorrect connection of encoder

Safety Standards

UL 508C

Power conversion equipment

UL 840

Insulation coordination including clearances and creepage distances for electrical equipment

EN 61800-5-1

Safety requirements electrical, thermal and energy

EN 50178

Electronic equipment for use in power installations

EN 60204-1

Safety of machinery.

Electrical equipment of machines.

Part 1: General requirements.

Note: In order to have a machine in conformity with this norm, the machine manufacturer is responsible for the installation of an emergency shutdown device and

an equipment for network sectioning

EN 60146 (IEC 146)

Semiconductor converters

EN 61800-2

Adjustable speed electrical power drive systems

Part 2: General requirements – rating specifi cations for low voltage adjustable frequency a.c. power drive systems

Mechanical

Construction

Standards

EN 60529 - Degrees of protection provided by enclosures (IP Code)


Electromagnetic

Compatibility

Standards (EMC)

EN 61800-3 - Adjustable speed electrical power drive systems

Part 3: EMC product standard including specifi c test methods

EN 55011 - Limits and methods of measurement of radio disturbance characteristics of industrial, scientifi c and medical (ISM)

radio-frequency equipment

CISPR 11 - Industrial, scientifi c and medical (ISM)radio-frequency equipment Electromagnetic disturbance characteristics.

Limits and methods of measurement



Section 2: Electrostatic discharge immunity test



Section 3:Radiated, radiofrequency, electromagnetic fi eld immunity test



Section 4: Electrical fast transient / burst immunity test



Section 5: Surge immunity test



Section 6: Immunity to conducted disturbances, induced by radio-frequency fi elds

101


www.pamensky.com


Standard Features

• Built-in DC Link Reactor

• Encoder Interface

• RS485 Port for Modbus-RTU

communication

• 8 Digital Inputs / 5 Digital Outputs.

• 2 Analog Inputs / 2 Analog Outputs.

• Common DC bus Connection

• Multi-speed: up to 8 preset speeds can

be programmed.

• PID regulation: eliminates the use of an

external controller for closed loop control,

thus great performance of speed and

torque can be achieved.

• Ride through: embedded in the CFW700

control this function avoids the drive from

tripping during a power outage.

• Speed/Torque regulation: open and

closed loop (encoder feedback required).

• Flying start: it is able to start smoothly

a motor connected to a rotating load

regardless rotation direction.

• Control options for DC bus regulation:

prevents the drive from tripping when

short deceleration time is required, in

demanding applications with high inertia

loads.

• S ramp: in applications requiring smooth

start-up (e.g. beverage industry) this

function can avoid production losses

traditional start-up incurs.

• Three-wire Start/Stop control: retentive

contact can command the drive to start/

stop the motor. (Soft PLC)

• Electronic potentiometer: increase and

decrease motor speed using pushbutton

control

• Skip frequency: for some applications

specifi c frequencies must be avoided to

protect against resonance effects.

• Motor thermal curve adjustment: separate

adjustment between the motor and drive

allows for more effective protection for

overload cycles.

• Copy function: by using the fl ash memory

card MMF-02 parameter settings can

be easily stored ensuring integrity and

safety in case replacement of the drive is

required.

Factory Options

• Safety Stop

• RFI Filter

• 24 VDC power input option for control section

Designed for controlling squirrel cage three-

phase induction motors the new CFW700 is a

general purpose drive that gives costumers the

fl exibility needed for the control of applications

ranging from simple speed control to more

demanding ones including torque control.

101


www.pamensky.com

CFW 700 - Part Number Specifi cation

1 32 654 7 8 9 10

-- Y1 W120DB4TA 03P6CFW700


2. Frame Size: A, B, C, D or E

3. Output Rated Current: 200-240V 380-480V 500-600V

06P0 = 6.0 A 03P6 = 3.6 A 02P9 = 2.9 A

07P0 = 7.0 A 05P0 = 5.0 A 04P2 = 4.2 A

10P0 = 10 A 06P0 = 6 A 07P0 = 7 A

13P0 = 13 A 07P0 = 7.0 A 10P0 = 10 A

16P0 = 16 A 10P0 = 10 A 12P0 = 12 A

24P0 = 24 A 13P5 = 13.5 A 17P0 = 17 A

28P0 = 28 A 17P0 = 17 A 22P0 = 22 A

33P5 = 33.5 A 24P0 = 24 A 27P0 = 27 A

45P0 = 45 A 31P0 = 31 A 32P0 = 32 A

54P0 = 54 A 38P0 = 38 A 44P0 = 44 A

70P0 = 70 A 45P0 = 45 A 53P0 = 53 A

86P0 = 86 A 58P5 = 58.5 A 63P0 = 63 A

0105 = 105 A 70P5 = 70.5 A 80P0 = 80 A

0142 = 142 A 88P0 = 88 A 0107 = 107 A

0180 = 180 A 0105 = 105 A 0125 = 125 A

0211 = 211 A 0142 = 142 A 0150 = 150 A

0180 = 180 A

0211 = 211 A



T = three-phase


5. Power Supply Voltage: 2 = 200-240 V (Frames A, B, C, D)

220-230 V (Frame E)

4 = 380-480 V

5 = 500-600 V

6. Braking Module: NB = no built-in IGBT

DB = with built-in braking IGBT (standard for frames

A, B, C, D)

7. Enclosure: 20 = IP 20 (standard for frames A, B, C and E)

N1 = Nema 1 (standard for frame D)

21 = IP21

8. RFI Filter: Blank = standard


Y1 = with safety stop function according to

EN-954-1 category 3

10. External Electronic Supply for Control:

Blank = Control circuit is fed by the inverter SMPS

W1 = Control circuit is supplied from an external +24Vdc

Example: CFW700B28POT2DB20

101


www.pamensky.com






Current

(A)Built-In

Dynamic

Braking


FrameWeight

(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

Part NumberList

PriceND* HD*

ND* HD* HP HP

6 5 Standard 1.5 1 A 13.9 NEMA 1 12.02 x 5.71 x 8.94 CFW700A06POB2DBN1 $1,699

7 7 Standard 2 2 A 13.9 NEMA 1 12.02 x 5.71 x 8.94 CFW700A07POB2DBN1 1,748

10 10 Standard 3 3 A 13.9 NEMA 1 12.02 x 5.71 x 8.94 CFW700A10POS2DBN1 1,854



Current

(A)Built-In

Dynamic

Braking


FrameWeight

(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

Part NumberList

PriceND* HD*

ND* HD* HP HP

142 115 Optional 50 40 E 143.3 NEMA 1 28.94 x 13.20 x 14.10 CFW700E0142T2NBN1C3 $10,796

180 142 Optional 60 50 E 143.3 NEMA 1 32.63 x 13.20 x 14.10 CFW700E0180T2NBN1C3 15,125




Current

(A)Built-In

Dynamic

Braking


FrameWeight

(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

Part NumberList

PriceND* HD*

ND* HD* HP HP

6 5 Standard 1.5 1 A 13.9 NEMA 1 12.02 x 5.71 x 8.94 CFW700A06POB2DBN1 $1,699

7 7 Standard 2 2 A 13.9 NEMA 1 12.02 x 5.71 x 8.94 CFW700A07POB2DBN1 1,748

7 5.5 Standard 2 1 A 13.9 NEMA 1 12.02 x 5.71 x 8.94 CFW700A07POT2DBN1 1,626

10 8 Standard 3 2 A 13.9 NEMA 1 12.02 x 5.71 x 8.94 CFW700A10POT2DBN1 1,724



24 20 Standard 7.5 5 B 22.9 NEMA 1 13.82 x 7.46 x 8.94 CFW700B24POT2DBN1 2,371

28 24 Standard 10 7.5 B 22.9 NEMA 1 13.82 x 7.46 x 8.94 CFW700B28POT2DBN1 2,417

33.5 28 Standard 10 10 B 22.9 NEMA 1 13.82 x 7.46 x 8.94 CFW700B33POT2DBN1 2,748

45 36 Standard 15 10 C 45.2 NEMA 1 17.64 x 8.67 x 11.52 CFW700C45POT2DBN1 3,270



86 70 Standard 30 25 D 120.2 NEMA 1 21.63 x 11.81 x 12.00 CFW700D86POT2DBN1 5,880

105 86 Standard 40 30 D 120.2 NEMA 1 21.63 x 11.81 x 12.00 CFW700D0105T2DBN1 7,555

* ND - Normal Duty



* HD - Heavy Duty



gs listed above are based on WEG 2 and 4 pole motors. For motors with different numbers of poles (ie. 6 and 8 poles), other voltages and/

ecify the VFD through the motor rated current.

60 E 143.3 NEMA 1 32.63 x 13.20 x 14.10 CFW700E0211T2NBN1C3 19,767

utes

es

* HD - Heavy Duty



101


www.pamensky.com



Current

(A)Built-In

Dynamic

Braking


FrameWeight

(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

Part NumberList

PriceND* HD*

ND* HD* HP HP

3.6 3.6 Standard 2 2 A 13.9 NEMA 1 12.02 x 5.71 x 8.94 CFW700A03P6T4DBN1 $1,670

5 5 Standard 3 3 A 13.9 NEMA 1 12.02 x 5.71 x 8.94 CFW700A05P0T4DBN1 1,771

7 5.5 Standard 3 3 A 13.9 NEMA 1 12.02 x 5.71 x 8.94 CFW700A07P0T4DBN1 1,833

10 10 Standard 5 5 A 13.9 NEMA 1 12.02 x 5.71 x 8.94 CFW700A10P0T4DBN1 1,887

13.5 11 Standard 7.5 7.5 A 13.9 NEMA 1 12.02 x 5.71 x 8.94 CFW700A13P5T4DBN1 1,978

17 13.5 Standard 10 7.5 B 22.9 NEMA 1 13.82 x 7.46 x 8.94 CFW700B17P0T4DBN1 2,334

24 19 Standard 15 10 B 22.9 NEMA 1 13.82 x 7.46 x 8.94 CFW700B24P0T4DBN1 2,820


38 33 Standard 25 20 C 45.2 NEMA 1 17.64 x 8.67 x 11.52 CFW700C38P0T4DBN1 4,224

45 38 Standard 30 25 C 45.2 NEMA 1 17.64 x 8.67 x 11.52 CFW700C45P0T4DBN1 5,317

58.5 47 Standard 40 30 C 45.2 NEMA 1 17.64 x 8.67 x 11.52 CFW700C58P5T4DBN1 6,576

70.5 61 Standard 50 40 D 120.2 NEMA 1 21.63 x 11.81 x 12.00 CFW700D70P5T4DBN1 7,129

88 73 Standard 60 50 D 120.2 NEMA 1 21.63 x 11.81 x 12.00 CFW700D88P0T4DBN1 8,524







Current

(A)Built-In

Dynamic

Braking


FrameWeight

(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

Part NumberList

PriceND* HD*

ND* HD* HP HP

2.9 2.7 Standard 2 2 B 22.9 NEMA 1 13.82 x 7.46 x 8.94 CFW700B02P9T5DBN1 $2,089

4.2 3.8 Standard 3 2 B 22.9 NEMA 1 13.82 x 7.46 x 8.94 CFW700B04P2T5DBN1 2,169

7 6.5 Standard 5 5 B 22.9 NEMA 1 13.82 x 7.46 x 8.94 CFW700B07P0T5DBN1 2,283

10 9 Standard 7.5 7.5 B 22.9 NEMA 1 13.82 x 7.46 x 8.94 CFW700B10P0T5DBN1 2,464

12 10 Standard 10 7.5 B 22.9 NEMA 1 13.82 x 7.46 x 8.94 CFW700B12P0T5DBN1 2,603


22 19 Optional 20 15 D 120.2 NEMA 1 21.63 x 11.81 x 12.00 CFW700D22P0T5NBN1 4,552




53 44 Optional 50 40 E 143.3 NEMA 1 28.94 x 13.20 x 14.10 CFW700E53P0T5NBN1C3 9,365







50 E 143.3 NEMA 1 28.94 x 13.20 x 14.10 CFW700E63P0T5NBN1C3 10,676

60 E 143.3 NEMA 1 28.94 x 13.20 x 14.10 CFW700E80P0T5NBN1C3 11,306




Notes: The maximum motor power ratings listed above are based on WEG 2 and 4 pole motors. For motors with different numbers of poles

(ie. 6 and 8 poles), other voltages and/or from other manufacturers, specify the VFD through the motor rated current.

* ND - Normal Duty



* HD - Heavy Duty



101


www.pamensky.com

CFW 700 - AccessoriesCommunication


CAN Interface Module (CANopen and DeviceNet) CAN-01 $378

Profi bus DP-V1 Interface modul PROFIBUS DP-01 512

Keypad Accessories and Cable for HMI











Shielding Kits


Power cable shielding kit for frame A PCSA-01 $42

Power cable shielding kit for frame B PCSB-01 44

Power cable shielding kit for frame C PCSC-01 47

NEMA 1 Kits


NEMA 1 - conduit kit kit for frame A + Power cable shielding KN1A-02 $109

NEMA 1 - conduit kit kit for frame B + Power cable shielding KN1B-02 109

NEMA 1 - conduit kit kit for frame C + Power cable shielding KN1C-02 124

101


www.pamensky.com


Voltage and rating

features

Voltage

Single-phase 200-220 V ac (+10%-15%)

Three-phase

200-220 V ac (+10%-15%)

380-480 V ac (+10%-15%)

500-600 V ac (+10%-15%)

Power

Single-phase 1.5 to 3 HP (1.1 to 2.2 kW)

Three-phase

1.5 to 75 HP (1.1 to 55 kW)

2 to 150 HP (1.5 to 110 kW)

2 to 175 HP (1.5 to 110 kW)

Frequency 50...60 Hz (+/-2%_48 to 63 Hz)



Power factor0.94 for Three-phase input at nominal conditional

0.70 for Single-phase input at nominal conditional

Control

Frequency range0 to 3.4x motor rated frequency (P0403). The rated frequency is programable up to 300Hz (V/Hz) and

120Hz (vector mode). Switching Frequency data must be observed for speed limits.

Switching

frequency

Standard: 5 kHz (A, B, C e D frames)

2.5 kHz for all 380 V models frame E

2.5 kHz for frame E 220 V models 142/180 Amps (ND)

2.5 kHz for frame E 220 V model 211 Amps (ND/HD)

5 kHz for frame E 220 V models 142/180 Amps (HD)

Available options for 2.5/5/10 kHz (check for derating)

Overload

Normal Duty (ND)110% for 1 min every 10 min

150% for 3 s every 10 min

Heavy Duty (HD)150% for 1 min every 10 min

200% for 3 s every 10 min

Aceleration 0 to 999 s

Deceleration 0 to 999 s

Environment

Temperature

-10 to 50 °C (14 to 122 °F) for most of models. For operating temperature of each model the table "Dimensions, Weight and

Temperature”shall be checked.

-10...60ºC for frames A, B, C and D (up to 45 °C without derating for models 13 A and 24 A/200...240 V, 7 and 10 A/380...480 V and up to

50 °C without derating for the other models) and-10...55 °C for frame E (up to 45 °C without derating). If derating has to be considered have

2% current reduction for each °C above the specifi c operating temperature.

Humidity 5 to 90% with no condensation

Altitude0 to 1000 meters with no derating

Up to 4000 meters with current reduction of 1% for each 100 meters above 1000 meters

Braking Methods

Dynamic brakingAvailable as standard for frame sizes A, B, C and D for 460 V and D for 600 V. For frame size E "DB”models has to be used. An extra resistor

must be fi tted in for dynamic braking capability.

Optimal braking There is no need for braking resistor

DC braking DC current applied to motor

Performance

V/f

Speed control


Speed Variation range 1:20

Voltage vector VVWRegulation: 1% of rated speed


Sensorless vector Regulation: 0.5% of rated speed

Vector with encoder

(Encoder interface

built-in)


Regulation:+/- 0.1% of rated speed with digital reference

(keypad, serial fi eldbus, multispeed)

Regulation:+/- 0.2% of rated speed with 12 bits analog input

Torque control

Range: 10 to 180%

Regulation: +/-5% of rated torque


Regulation: +/-10% of rated torque (above 3 Hz)%

I/Os

Inputs

Digital 8 x isolated bidirectional 24 V

Analog2 x +/-10 V, 11 bits + signal (differencial) or 0/4...20 mA, 11 bits (differencial)

Impedance: 400 kΩ for voltage signal / 500 Ω for current signal

OutputRelay

1 x relay NO/NC contact (240 V ac/1 A)

4 x open drain (24 V/200 mA)

Analog 2 x 0...10 V or 0/4...20 mA, 11 bits

24 V power supply

capacity500 mA (available for the user, including I/Os)

101


www.pamensky.com


Communication

Modbus-RTURS485 built-in (available at the control terminals)

RS485 built-in / Superdrive and WLP communication

DeviceNet CAN-01 (slot 3)

CANopen CAN-01 (slot 3)

Profi bus DP PROFIBUS DP-01 (slot 3)

Safety standards

UL 508C Power conversion equipment

UL 840 Insulation coordination including clearences and creepage distances for electrical equipment

EN61800-5-1 - Safety requirements electrical, thermal and energy.

EN 50178 - Electronic equipment for use in power installations.

EN 60204-1 - Safety of machinery. Electrical equipment of machines. Part 1: General requirements. In order to have a machine in conformity with this regulation,

the machine builder is resposible forthe installation of na emergency shutdown device and na equipment for power disconnection.

EN 60146 (IEC 146) - Semiconductor converters.

EN 61800-2 - Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifi cations for low voltage adjustable frequency

A.C. power drive systems

Mechanical

construction

standards

eletromagnetic

compatibility

standards (EMC)

EN 60529 - Degrees of protection provided by enclosures (IP code).


EN 61800-3 - Adjustable speed electrical power drive systems - Part 3: EMC product standard including specifc test methods.

EN 55011 - Limits and methods of measurement of radio disturbance characteristics of undustrial, scientifi c and medical (ISM) radio-frequency equipment.

CISPR 11 - Industrial, scientifc and medical (ISM) radio-frequency equipment - Eletromagnetic disturbance characteristics

- Limits and methods of measurement.

EN 61000-4-2 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 2: Eletrostatic

discharge immunity test.

EN 61000-4-3 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 3: Radiated, radio-

frequency, electromagnetic feld immunity test.

EN 61000-4-4 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 4: Electrical fast

transient/burst immunity test.

EN 61000-4-5 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 5: Surge immunity test.

EN 61000-4-6 - Electromagnetic compatibility (EMC)- Part 4: Testing and measurement techniques - Section 6: Immunity to conducted

disturbances, induced by radio-frequency fi elds.

Protections

Overcurrent / Short Circuit

Under / Overvoltage in the power section

Phase Loss

VSD thermal Overload (IGBTs, rectifi er and in the eletronics)

Motor thermal overload

Braking resistor overload

IGBTs overload

Motor overload


CPU failure

Phase-to ground short circuit at the output

Failure at the heatsink fan

Motor overspeed

Wrong connection of encoder wiring

101


www.pamensky.com

CFW 701 - HVAC Variable Frequency Drive

Standard Features

• 230 V single-phase

Rated output current 6 to 10 A (1,5 to 3

HP - 1.5 to 3 kW)

• 220 V three-phase

Rated output current of 7 to 211 A (0.5 to

75 HP - 0.18 to 55 kW)

• 380-480 V three-phase

Rated output current of 3.6 to 211 A (0.5

to 150 HP - 0.58 to 110 kW)

• Compact structure, ideal for installation in

confi ned spaces

• High accuracy and reliability in speed

control

• Robust hardware

• Degree of protection IP20 - standard

(IP21 and NEMA1 optional)

• RFI fi lter( for electromagnetic interference

mitigation)

• LCD Operating interface with backlight

• Inductors in the DC Link

• Inputs and outputs (I/O):

8 Isolated digital inputs

3 Differential analog inputs (0-10V/4-20

mA (2) and 4-20 mA (1))

5 Digital outputs (2 relays with NA

contacts, 3 isolated transistors)

2 Non-isolated analog outputs

1 Dedicated input for PTC

• Special varnish protects electronic boards

from dust, moisture, high temperatures

and chemicals According to DIN EN

60068-2-60

• RS-485 interface: BACnet MS/TP,

Metasys N2 and Modbus RTU

• Intelligent cooling system

Optional Features

• Operator interface for remote assembly

(up to 10 meters)

• Flash memory module (storage capacity

of 1 MB)

• Safety stop module – Guarantees the

blocking of fi ring circuit and therefore

power to the motor. Meets EN 954-1 / EN

13849-1, category 3 standards.

This VFD complies with the following standards:

• EN 61800-5-2:2007, EN ISO 13849-

1:2008 + AC:2009, IEC 62061:2005, IEC

61508 Parts 1-7:2010, EN 50178:1997,

IEC 60204-1:2005 (in extracts)

The CFW701 HVAC is a variable-speed drive intended for use

with asynchronous motors when heating, ventilation, air

conditioning and refrigeration applications are to be met.

Offering excellent cost-effectiveness, the CFW701 HVAC follows

the CFW700 with plug and play technology, accessories

incorporated in the standard version and simple operation.

101


www.pamensky.com

CFW 701 - Part Number Specifi cation

1 32 654 7 8 9 10

-- Y1 W120DB4TA 03P6CFW701

1. CFW-701 HVAC Variable Frequency Drive

2. Frame Size: A, B, C, D or E

3. Output Rated Current: 200-240V 380-480V

06P0 = 6.0 A 03P6 = 3.6 A

07P0 = 7.0 A 05P0 = 5.0 A

10P0 = 10 A 06P0 = 6 A

13P0 = 13 A 07P0 = 7.0 A

16P0 = 16 A 10P0 = 10 A

24P0 = 24 A 13P5 = 13.5 A

28P0 = 28 A 17P0 = 17 A

33P5 = 33.5 A 24P0 = 24 A

45P0 = 45 A 31P0 = 31 A

54P0 = 54 A 38P0 = 38 A

70P0 = 70 A 45P0 = 45 A

86P0 = 86 A 58P5 = 58.5 A

0105 = 105 A 70P5 = 70.5 A

0142 = 142 A 88P0 = 88 A

0180 = 180 A 0105 = 105 A

0211 = 211 A 0142 = 142 A

0180 = 180 A

0211 = 211 A



T = three-phase


5. Power Supply Voltage: 2 = 200-240 V (Frames A, B, C, D)

220-230 V (Frame E)

4 = 380-480 V

6. Braking Module: NB = no built-in IGBT

DB = with built-in braking IGBT (standard for frames

A, B, C, D)

7. Enclosure: 20 = IP 20 (standard for frames A, B, C and E)

N1 = Nema 1 (standard for frame D)

21 = IP21 (not available for frame E)

8. RFI Filter: Blank = standard


Y1 = with safety stop function according to

EN-954-1 category 3

10. External Electronic Supply for Control:

Blank = Control circuit is fed by the inverter SMPS

W1 = Control circuit is supplied from an external +24Vdc

Example: CFW701B28POT2DB20

101


www.pamensky.com






Current

(A)

Built-In Dynamic

Braking

Maximum

Applicable Motor FrameWeight

(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

Part Number

HP

6 Standard 1.5 A 13.9 NEMA 1 12.02 x 5.71 x 8.94 CFW701A06POS2DB20

7 Standard 2 A 13.9 NEMA 1 12.02 x 5.71 x 8.94 CFW701A07POS2DB20

10 Standard 3 A 13.9 NEMA 1 12.02 x 5.71 x 8.94 CFW701A10POS2DB20

200-240V - Single and Three Phase


Current

(A)

Built-In Dynamic

Braking

Maximum


(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

Part Number

HP

6 Standard 1.5 A 13.9 NEMA 1 12.02 x 5.71 x 8.94 CFW701A06POB2DB20

7 Standard 2 A 13.9 NEMA 1 12.02 x 5.71 x 8.94 CFW701A07POB2DB20



Current

(A)

Built-In Dynamic

Braking

Maximum


(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

Part Number

HP

7 Standard 2 A 13.9 NEMA 1 12.02 x 5.71 x 8.94 CFW701A07POT2DB20




24 Standard 7.5 B 22.9 NEMA 1 13.82 x 7.46 x 8.94 CFW701B24POT2DB20

28 Standard 10 B 22.9 NEMA 1 13.82 x 7.46 x 8.94 CFW701B28POT2DB20

33.5 Standard 10 B 22.9 NEMA 1 13.82 x 7.46 x 8.94 CFW701B33POT2DB20

45 Standard 15 C 45.2 NEMA 1 17.64 x 8.67 x 11.52 CFW701C45POT2DB20



86 Standard 30 D 71.8 NEMA 1 21.63 x 11.81 x 12.00 CFW701D86POT2DB20

105 Standard 40 D 71.8 NEMA 1 21.63 x 11.81 x 12.00 CFW701D0105POT2DB20



Current

(A)

Built-In Dynamic

Braking

Maximum


(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

Part Number

HP

142 Optional 50 E 143.3 NEMA 1 28.94 x 13.20 x 14.10 CFW701E0142POT2NB20



* ND - Normal Duty


101


www.pamensky.com

CFW 701 - Table of Products380-480V - Three Phase


Current

(A)

Built-In Dynamic

Braking

Maximum


(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

Part Number

HP

3.6 Standard 2 A 13.9 NEMA 1 12.02 x 5.71 x 8.94 CFW701A03P6T4DB20

5 Standard 3 A 13.9 NEMA 1 12.02 x 5.71 x 8.94 CFW701A05P0T4DB20



13.5 Standard 7.5 A 13.9 NEMA 1 12.02 x 5.71 x 8.94 CFW701A13P5T4DB20

17 Standard 10 B 22.9 NEMA 1 13.82 x 7.46 x 8.94 CFW701B17P0T4DB20



38 Standard 25 C 45.2 NEMA 1 17.64 x 8.67 x 11.52 CFW701C38P0T4DB20

45 Standard 30 C 45.2 NEMA 1 17.64 x 8.67 x 11.52 CFW701C45P0T4DB20

58.5 Standard 40 C 45.2 NEMA 1 17.64 x 8.67 x 11.52 CFW701C58P5T4DB20

70.5 Standard 50 D 71.8 NEMA 1 21.63 x 11.81 x 12.00 CFW701D70P5T4DB20

88 Standard 60 D 71.8 NEMA 1 21.63 x 11.81 x 12.00 CFW701D88P0T4DB20

105 Optional 75 E 143.3 NEMA 1 28.94 x 13.20 x 14.10 CFW701E0105T4NB20






Current

(A)

Built-In Dynamic

Braking

Maximum


(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

Part Number

HP

2.9 Standard 2 B 22.9 NEMA 1 13.82 x 7.46 x 8.94 CFW701B02P9T5DB20

4.2 Standard 3 B 22.9 NEMA 1 13.82 x 7.46 x 8.94 CFW701B04P2T5DB20


10 Standard 7.5 B 22.9 NEMA 1 13.82 x 7.46 x 8.94 CFW701B10P0T5DB20



22 Optional 20 D 71.8 NEMA 1 21.63 x 11.81 x 12.00 CFW701D22P0T5NB20




53 Optional 50 E 143.3 NEMA 1 32.63 x 13.20 x 14.10 CFW701E53P0T5NB20









* ND - Normal Duty


101


www.pamensky.com

CFW 701 - AccessoriesCommunication

Description Part Number

CAN Interface Module (CANopen and DeviceNet) CAN-01

Profi bus DP-V1 Interface modul PROFIBUS DP-01

Keypad Accessories and Cable for HMI


CFW 700 Keypad HMI-03

Frame for keypad remote assembly, IP56 RHMIF-03

Blank cover for keypad slot HMID-01

1m (3.3ft) Remote Keypad Cable IHM CAB-RS-1M

2m (6.6ft) Remote Keypad Cable IHM CAB-RS-2M

3m (10ft) Remote Keypad Cable IHM CAB-RS-3M


7.5m (25ft) Remote Keypad Cable IHM CAB-RS-7.5M


Shielding Kits


Power cable shielding kit for frame A PCSA-01

Power cable shielding kit for frame B PCSB-01

Power cable shielding kit for frame C PCSC-01

NEMA 1 Kits


NEMA 1 - conduit kit kit for frame A + Power cable shielding KN1A-02

NEMA 1 - conduit kit kit for frame B + Power cable shielding KN1B-02

NEMA 1 - conduit kit kit for frame C + Power cable shielding KN1C-02

101


www.pamensky.com

Voltage and rating

features

Voltage

Single phase 200-220 V ac (+10 %-15 %)

Three phase

200-220 V ac (+10 %-15 %)

380-480 V ac (+10 %-15 %)

500-600 V ac (+10%-15%)

Power

Single phase 1.5 to 3 HP (1.1 to 2.2 kW)

Three phase1.5 to 75 HP (1.1 to 55 kW)

2 to 150 HP (1.5 to 110 kW)

Frequency 50...60 Hz (+/-2%_48 to 63 Hz)

Displacement

factorGreater than 0.98


Power factor0.94 for three phase input at nominal conditional

0.70 for single phase input at nominal conditional

Control

Frequency range0 to 3.4x motor rated frequency (P0403). The rated frequency is programable up to 300 Hz (V/Hz) and

120 Hz (vector mode). Switching Frequency data must be observed for speed limits.

Switching

frequency

Standard: 5 kHz ( A, B, C D frames)

2.5 kHz for all 380 V models frame E

2.5 kHz for frame E 220 V models 142/180 Amps (ND)

2.5 kHz for frame E 220 V model 211 Amps (ND/HD)

5 kHz for frame E 220 V models 142/180 Amps (HD)

Available options for 2.5 / 5 / 10 kHz ( check for derating)

Overload

Normal Duty

(ND)110% for 1min every 10 min

Aceleration 0 to 999 s

Deceleration 0 to 999 s

Environment

Temperature

-10 to 50 °C (14 to 122 °F) for most of models. For operating temperature of each model the table " Dimensions,

Weight and Temperature" shall be checked.-10...60ºC for frames A, B, C and D (up to 45 °C without derating for models 13 A and 24 A/200...240 V, 7 and

10 A/380...480 V and up to 50 °C without derating for the other models) and-10...55 °C for frame E (up to 45 °C

without derating). If derating has to be considered have 2% current reduction for each °C above the specifi c operating

temperature.

Humidity 5 to 90% with no condensation

Altitude0 to 1000 meters with no derating

Up to 4000 meters with current reduction of 1% for each 100 meters above 1000 meters

Braking methods

Dynamic brakingAvailable as standard for frame sizes A, B, C and D for 460 V and D for 600 V. For frame size E "DB" models has to be

used. An extra resistor must be fi tted in for dynamic braking capability.

Optimal braking There is no need for braking resistor

DC braking DC Current applied to motor

Performance

V/f

Speed control



Voltage Vector

VVW



I/Os

Inputs

Digital 8 x isolated bidirectional 24 V

Analog2 x +/-10V, 11 bits + signal (differencial) or 0/4...20 mA, 11 bits (differencial)

Impedance: 400 kΩ for voltage signal / 500Ω for current signal

Output

Relay2 x relay NO/NC contact (240 V ac/1 A)

4 x open drain (24 V/200 mA)

Analog

1 x 0/4 - 20 mA 11bits

2 x 0...10 V or 0/4...20 mA, 11 bits

(not isolated from inverter ground)24 V power

supply capacity500 mA (available for the user, including I/Os)

Communication

Modbus RTU

BACnet MS/TP

Metasys N2

RS485 built-in ( Available in control terminals)

RS485 built-in / Superdrive and WLP communication


101


www.pamensky.com

Safety standards

UL 508C Power conversion equipment

UL 840 Insulation coordination including clearences and creepage distances for electrical equipment

EN61800-5-1 - Safety requirements electrical, thermal and energy.

EN 50178 - Electronic equipment for use in power installations.

EN 60204-1 - Safety of machinery. Electrical equipment of machines. Part 1: General requirements. In order to have a machine in

conformity with this regulation, the machine builder is resposible forthe installation of na emergency shutdown device and na equipment for

power disconnection.

EN 60146 (IEC 146) - Semiconductor converters.

EN 61800-2 - Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifi cations for low voltage

adjustable frequency A.C. power drive systems

Mechanical

Construccion

Standards

Eletromagnetic

Compatibility

Standards (EMC)

EN 60529 - Degrees of protection provided by enclosures (IP code).


EN 61800-3 - Adjustable speed electrical power drive systems - Part 3: EMC product standard including specifc test methods.

EN 55011 - Limits and methods of measurement of radio disturbance characteristics of undustrial, scientifi c and medical (ISM) radio-

frequency equipment.CISPR 11 - Industrial, scientifc and medical (ISM) radio-frequency equipment - Eletromagnetic disturbance characteristics - Limits and

methods of measurement.EN 61000-4-2 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 2: Eletrostatic discharge

immunity test.EN 61000-4-3 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 3: Radiated, radio-frequency,

electromagnetic feld immunity test.EN 61000-4-4 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 4: Electrical fast transient/

burst immunity test.

EN 61000-4-5 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 5: Surge immunity test.

EN 61000-4-6 - Electromagnetic compatibility (EMC)- Part 4: Testing and measurement techniques - Section 6: Immunity to conducted

disturbances, induced by radio-frequency fi elds.

Protections

Overcurrent / Short circuit

Under / Overvoltage in the power section

Phase loss

VSD thermal overload ( IGBTs, rectifi er and in the eletronics)

Motor thermal overload

Braking resistor overload

IGBTs overload

Motor overload


CPU failure

Phase-to ground short circuit at the output

Failure at the heatsink fan

Motor overspeed

Wrong connection of encoder wiring


coder wiring

101


www.pamensky.com

MVW 01- Medium Voltage VFD

WEG is a traditional supplier of solutions in speed variation, manufacturing all the parts of a system:

Input switchgear, transformer(dry-type or oil-type), frequency inverter and electric motor.

The MVW01 is designed to control medium voltage induction motors. It features unique innovations,

combining hardware robustness with simplicity, reliability and safety in a compact solution with few

components and state-of-the-art technology.

MVW01 follows the same programming

philosophy of the WEG low voltage inverter line,

simplifying its application.

It has a multilevel topology with high-voltage

IGBTs (3.3 or 6.5 kV) and optimal switching

reducing the motor harmonic currents to

extremely low levels. By reducing the number

of components in the drive WEG has made the

MVW-01 more effi cient and reliables.

The multipulse diode confi guration of the input

rectifi er gives a high power factor in the power

supply meeting IEEE 519 requirements.

In the control stage, it has a multiprocessing

architecture using 32-bit processors (64-bit

bus) with fl oating point capability and high

performance, ensuring high effi ciency in motor

control.

Standard Features

• Motor voltage: 2.3 kV, 3.3 kV, 4.16 kV or up

to 6.0 kV - 6.9 kV

• Power ratings up to 8,000 hp (6,000 kW)

• 12-pulse diode input rectifi er (18 or 24

pulses are also available)

• Reduced number of components, which

results in high effi ciency and reliability

• Assembled in IP41/NEMA1 panel

• Multilevel power topology: Neutral Point

Clamped (NPC)

• 3/5 level up to 4160 V

• 5/9 level above 6000 V

• Power and control sections isolated by fi ber

optic cable or optics

• Network communication

• Dry-type plastic fi lm power capacitors of high

reliability and long useful life

• Voltage Source Inverter (VSI)

• Air-cooled

• High effi ciency (> 99%)

• High power factor (> 95%)

• Low noise level (< 75 dBa)

• Low heat dissipation

2300, 6600 & 6900V:

3300 & 4160V:

101


www.pamensky.com

MVW 01 - Specifi cation Table2300V - Three Phase


Current

(A)


FrameWeight

(lb)

Degree of

Protection

Dimensions (in)

H x W x DPart NumberConstant Torque Variable Torque

CT VT HP KW HP KW

120 137 500 400 600 450 A 3,432 IP41 86.22 x 94.49 x 37.80 MVW010120T2300ESZ

140 160 600 450 700 500 A 3,432 IP41 86.22 x 94.49 x 37.80 MVW010140T2300ESZ

165 175 700 500 750 560 A 3,432 IP41 86.22 x 94.49 x 37.80 MVW010165T2300ESZ

175 200 750 560 900 710 A 3,432 IP41 86.22 x 94.49 x 37.80 MVW010175T2300ESZ

210 240 900 710 1000 750 A 3,432 IP41 86.22 x 94.49 x 37.80 MVW010210T2300ESZ

250 280 1000 800 1250 900 A 3,432 IP41 86.22 x 94.49 x 37.80 MVW010250T2300ESZ

280 320 1250 900 1500 1120 B 3,740 IP41 86.22 x 102.36 x 37.80 MVW010280T2300ESZ

386 440 1750 1250 2000 1400 B 3,740 IP41 86.22 x 102.36 x 37.80 MVW010386T2300ESZ

450 490 2000 1400 2250 1600 B 3,740 IP41 86.22 x 102.36 x 37.80 MVW010450T2300ESZ

490 560 2250 1600 2500 1600 B 3,740 IP41 86.22 x 102.36 x 37.80 MVW010490T2300ESZ

560 640 2500 1800 3000 2200 B 3,740 IP41 86.22 x 102.36 x 37.80 MVW010560T2300ESZ

730 835 3000 2200 3500 2500 C 5,940 IP41 86.22 x 157.48 x 37.80 MVW010730T2300ESZ

855 930 3700 2800 4000 3000 C 5,940 IP41 86.22 x 157.48 x 37.80 MVW010855T2300ESZ

930 1064 4000 3000 4500 3400 C 5,940 IP41 86.22 x 157.48 x 37.80 MVW010930T2300ESZ

1064 1216 4500 3400 5000 3700 C 5,940 IP41 86.22 x 157.48 x 37.80 MVW011064T2300ESZ

3300V - Three Phase


Current

(A)


FrameWeight

(lb)

Degree of

Protection

Dimensions (in)


CT VT HP KW HP KW

85 97 500 400 600 450 A 3,432 IP41 86.22 x 94.49 x 37.80 MVW010085T3300ESZ

100 112 600 450 700 500 A 3,432 IP41 86.22 x 94.49 x 37.80 MVW010100T3300ESZ

112 128 700 500 800 630 A 3,432 IP41 86.22 x 94.49 x 37.80 MVW010112T3300ESZ

138 150 800 630 900 710 A 3,432 IP41 86.22 x 94.49 x 37.80 MVW010138T3300ESZ

150 160 900 710 1000 800 A 3,432 IP41 86.22 x 94.49 x 37.80 MVW010150T3300ESZ

160 182 1000 800 1250 900 A 3,432 IP41 86.22 x 94.49 x 37.80 MVW010160T3300ESZ

186 212 1250 900 1500 1120 A 3,432 IP41 86.22 x 94.49 x 37.80 MVW010186T3300ESZ

235 265 1500 1120 1750 1250 A 3,432 IP41 86.22 x 94.49 x 37.80 MVW010235T3300ESZ

265 312 1750 1250 2000 1400 A 3,432 IP41 86.22 x 94.49 x 37.80 MVW010265T3300ESZ

310 354 2000 1400 2250 1600 A 3,432 IP41 86.22 x 94.49 x 37.80 MVW010310T3300ESZ

375 428 2500 1800 2750 2000 C 5,940 IP41 86.22 x 157.48 x 37.80 MVW010375T3300ESZ

500 571 3000 2200 3750 2800 C 5,940 IP41 86.22 x 157.48 x 37.80 MVW010500T3300ESZ

580 650 3750 2800 4000 3000 C 5,940 IP41 86.22 x 157.48 x 37.80 MVW010580T3300ESZ

670 755 4000 3000 4500 3300 D 9,900 IP41 87.52 x 233.07 x 39.57 MVW010670T3300ESZ

880 1008 5500 4100 6000 4500 D 9,900 IP41 87.52 x 233.07 x 39.57 MVW010880T3300ESZ

1178 1235 7000 5225 8000 6000 E 11,000 IP41 87.52 x 283.46 x 39.57 MVW011178T3300ESZ

4160V - Three Phase


Current

(A)


FrameWeight

(lb)

Degree of

Protection

Dimensions (in)


CT VT HP KW HP KW

70 80 500 400 600 450 A 3,432 IP41 86.22 x 94.49 x 37.80 MVW010070T4160ESZ

80 91 600 450 700 500 A 3,432 IP41 86.22 x 94.49 x 37.80 MVW010080T4160ESZ

94 107 700 500 800 630 A 3,432 IP41 86.22 x 94.49 x 37.80 MVW010094T4160ESZ

110 120 800 630 900 710 A 3,432 IP41 86.22 x 94.49 x 37.80 MVW010110T4160ESZ

120 130 900 710 1000 800 A 3,432 IP41 86.22 x 94.49 x 37.80 MVW010120T4160ESZ

130 148 1000 800 1250 900 A 3,432 IP41 86.22 x 94.49 x 37.80 MVW010130T4160ESZ

162 170 1250 900 1350 1000 A 3,432 IP41 86.22 x 94.49 x 37.80 MVW010162T4160ESZ

170 188 1350 1000 1500 1120 A 3,432 IP41 86.22 x 94.49 x 37.80 MVW010170T4160ESZ

188 214 1500 1120 1750 1300 A 3,432 IP41 86.22 x 94.49 x 37.80 MVW010188T4160ESZ

250 286 2000 1400 2250 1600 A 3,432 IP41 86.22 x 94.49 x 37.80 MVW010250T4160ESZ

300 342 2250 1600 2750 2000 C 5,940 IP41 86.22 x 157.48 x 37.80 MVW010300T4160ESZ

357 403 3000 2250 3900 2600 C 5,940 IP41 86.22 x 157.48 x 37.80 MVW010357T4160ESZ

475 542 4000 2900 4500 3300 C 5,940 IP41 86.22 x 157.48 x 37.80 MVW010475T4160ESZ

536 610 4000 2900 5000 3700 D 9,900 IP41 87.52 x 233.07 x 39.57 MVW010536T3300ESZ

712 815 5500 4100 6000 4500 D 9,900 IP41 87.52 x 233.07 x 39.57 MVW010712T4160ESZ

950 1086 7000 5225 8000 6000 E 11,000 IP41 87.52 x 283.46 x 39.57 MVW010950T4160ESZ

101


www.pamensky.com

MVW 01 - Specifi cation Table

Notes• Power rating guide, specify the MVW01 through the inverter output rated current• VT= Variable torque – allowable overload of 115% for 60s, every 10 min

6000 to 6300V - Three Phase


Current

(A)


FrameWeight

(lb)

Degree of

Protection

Dimensions (in)


CT VT HP KW HP KW

44 58 500 370 600 450 C1 3,740 IP41 90.79 x 70.87 x 47.24 MVW010058T6300ESZ

59 78 600 450 800 600 C1 3,740 IP41 90.79 x 70.87 x 47.24 MVW010078T6300ESZ

79 104 800 600 1000 750 C1 3,740 IP41 90.79 x 70.87 x 47.24 MVW010104T6300ESZ

95 124 900 675 1350 1000 C1 3,740 IP41 90.79 x 70.87 x 47.24 MVW010124T6300ESZ

107 140 1000 750 1500 1120 C1 3,740 IP41 90.79 x 70.87 x 47.24 MVW010140T6300ESZ

127 166 1350 1000 1750 1300 C2 6,820 IP41 87.64 x 137.87 x 39.57 MVW010166T6300ESZ

144 188 1500 1120 2250 1680 C2 6,820 IP41 87.64 x 137.87 x 39.57 MVW010188T6300ESZ

164 214 1750 1300 2500 1865 C2 6,820 IP41 87.64 x 137.87 x 39.57 MVW010214T6300ESZ

199 260 2250 1680 3000 2240 C2 6,820 IP41 87.64 x 137.87 x 39.57 MVW010260T6300ESZ

220 288 2500 1865 3500 2600 C2 6,820 IP41 87.64 x 137.87 x 39.57 MVW010288T6300ESZ

253 330 3000 2240 4000 3000 C3 11,000 IP41 87.52 x 182.68 x 39.57 MVW010330T6300ESZ

322 420 3700 2760 5000 3700 C3 11,000 IP41 87.52 x 182.68 x 39.57 MVW010420T6300ESZ

379 495 4500 3350 6000 4475 C3 11,000 IP41 87.52 x 182.68 x 39.57 MVW010495T6300ESZ

440 575 5000 3700 7000 5225 C3 11,000 IP41 87.52 x 182.68 x 39.57 MVW010575T6300ESZ

6600 to 6900V - Three Phase


Current

(A)


FrameWeight

(lb)

Degree of

Protection

Dimensions (in)


CT VT HP KW HP KW

40 53 500 370 600 450 C1 3,740 IP41 90.79 x 70.87 x 47.24 MVW01C0053T6900ESZ

53 70 600 450 800 600 C1 3,740 IP41 90.79 x 70.87 x 47.24 MVW01C0070T6900ESZ

72 94 800 600 1000 750 C1 3,740 IP41 90.79 x 70.87 x 47.24 MVW01C0094T6900ESZ

85 112 1000 750 1350 1000 C1 3,740 IP41 90.79 x 70.87 x 47.24 MVW01C0112T6900ESZ

99 130 1250 900 1500 1120 C1 3,740 IP41 90.79 x 70.87 x 47.24 MVW01C0123T6900ESZ

115 150 1350 1000 2000 1500 C2 6,820 IP41 87.64 x 137.87 x 39.57 MVW010150T6900ESZ

130 170 1500 1120 2250 1680 C2 6,820 IP41 87.64 x 137.87 x 39.57 MVW010170T6900ESZ

144 188 1750 1300 2500 1865 C2 6,820 IP41 87.64 x 137.87 x 39.57 MVW010188T6900ESZ

180 235 2250 1680 3000 2240 C2 6,820 IP41 87.64 x 137.87 x 39.57 MVW010235T6900ESZ

203 265 2500 1865 3500 2600 C2 6,820 IP41 87.64 x 137.87 x 39.57 MVW010265T6900ESZ

230 300 3000 2240 4000 3000 C3 11,000 IP41 87.52 x 182.68 x 39.57 MVW010300T6900ESZ

287 375 3700 2760 5000 3730 C3 11,000 IP41 87.52 x 182.68 x 39.57 MVW010375T6900ESZ

345 450 4500 3350 6000 4475 C3 11,000 IP41 87.52 x 182.68 x 39.57 MVW010450T6900ESZ

398 520 5000 3700 7000 5225 C3 11,000 IP41 87.52 x 182.68 x 39.57 MVW010520T6900ESZ

101


www.pamensky.com

MVW 01- Compact Medium Voltage VFD

WEG is a traditional supplier of solutions in speed variation, manufacturing all the parts of a system:

Input switchgear, transformer(dry-type or oil-type), frequency inverter and electric motor.

The MVW01 is designed to control medium voltage induction motors. It features unique innovations,

combining hardware robustness with simplicity, reliability and safety in a compact solution with few

components and state-of-the-art generation technology.

MVW01 follows the same programming

philosophy of the WEG low voltage inverter line,

simplifying its application.

It has a multilevel topology with high-voltage

IGBTs (3.3 or 6.5 kV) and optimal switching

reducing the motor harmonic currents to

extremely low levels. By reducing the number

of components in the drive WEG has made the

MVW-01 more effi cient and reliables.

The multipulse diode confi guration of the input

rectifi er gives a high power factor in the power

supply meeting IEEE 519 requirements.

In the control stage, it has a multiprocessing

architecture using 32-bit processors (64-bit

bus) with fl oating point capability and high

performance, ensuring high effi ciency in motor

control.

Standard Features

• Motor voltage: 2.3 kV, 3.3 kV, 4.16 kV or up

to 6.0 kV - 6.9 kV

• Power ratings up to 8,000 hp (6,000 kW)

• 18-pulse diode input rectifi er standard (12

pulse is also available)

• Reduced number of components, which

results in high effi ciency and reliability

• Assembled in IP41/NEMA1 panel

• Multilevel power topology: Neutral Point

Clamped (NPC)

• 3/5 level up to 4160 V

• 5/9 level above 6000 V

• Power and control sections isolated by fi ber

optic cable or optics

• Network communication

• Dry-type plastic fi lm power capacitors of high

reliability and long useful life

• Voltage Source Inverter (VSI)

• Air-cooled

• High effi ciency (> 99%)

• High power factor (> 95%)

• Low noise level (< 75 dBa)

• Low heat dissipation

101


www.pamensky.com

MVW 01 Compact - Specifi cation Table3300V - Three Phase


Current

(A)


FrameWeight

(lb)

Degree of

Protection

Dimensions (in)


CT VT HP KW HP KW

85 97 500 375 600 450 A0 1,980 IP41 91.18 x 39.37 x 39.45 MVW01C0085T3300ESZ

100 112 600 450 700 525 A0 1,980 IP41 91.18 x 39.37 x 39.45 MVW01C0100T3300ESZ

112 128 700 525 800 600 A0 1,980 IP41 91.18 x 39.37 x 39.45 MVW01C0112T3300ESZ

125 138 800 600 900 675 AO 1,980 IP41 91.18 x 39.37 x 39.45 MVW01C0125T3300ESZ

4160V - Three Phase


Current

(A)


FrameWeight

(lb)

Degree of

Protection

Dimensions (in)


CT VT HP KW HP KW

70 80 500 375 600 450 A0 1,980 IP41 91.18 x 39.37 x 39.45 MVW01C0070T4160ESZ

80 91 600 450 700 525 A0 1,980 IP41 91.18 x 39.37 x 39.45 MVW01C0080T4160ESZ

94 107 700 525 800 600 A0 1,980 IP41 91.18 x 39.37 x 39.45 MVW01C0094T4160ESZ

110 120 800 600 900 675 A0 1,980 IP41 91.18 x 39.37 x 39.45 MVW01C0110T4160ESZ

120 130 900 675 1000 750 A0 1,980 IP41 91.18 x 39.37 x 39.45 MVW01C0120T4160ESZ

Notes• Power rating guide, specify the MVW01 through the inverter output rated current• CT= Constant torque – allowable overload of 150% for¨60s, every 10 min• VT= Variable torque – allowable overload of 115% for 60s, every 10 min

101


www.pamensky.com

Main Power Supply

Voltage 2300, 3300, 4160, 6300 or 6900 V (± 10%, -20% with reduced output power)

Frequency 50 or 60 Hz (specify)± 3%

Phase Unbalance <3%

Cos >0,97

Overvoltage category Category III

Auxiliary supply

Voltages 220, 380, 400, 415, 440, 460 , 480, 525, 575, 660 or 690 V

Frequency 50 or 60 Hz, )±3 %

Phase Unbalance <3%

Protection degree Standard IP41

Dimensions Width / Height / Depth (mm) 7 different mechanics (see item 9.4)

Environmental Conditions

Temperature 0 to 40o C (up to 50o C with reduction of 2.5% / oC on the output current)

Humidity 5 to 90% noncondensing

Altitude 0 to 1000 m (up to 4000 m with reduction of 10% / 1000 m)

Pollution degree 2

Finishing Color (Standard)Light Blue cod. 14040 (Doors)

Dark Blue cod 42350 (Base, roof, shutters)

Control

Microprocessor 32 bits

Control Method PWM sinusoidal SVM (Space Vector Modulation) and optimal pulse patterns (OPP)

Control Types Scalar (Imposed voltage - V/F), sensorless vector and closed loop vector

Switching Device High voltage IGBT (HV – IGBT)

Frequency variation 0 to 100 Hz

Overload capacity150 % for 60 seconds, every 10 min. (1.5 x I rated. – CT)

115 % for 60 seconds, every 10 min. (1.15 x I rated – VT)

Effi ciency 99%

Performance Speed Control

V / FRegulation 1 % of rated speed with slip compensation

Resolution: 1 rpm (keypad reference)

SensorlessSpeed regulation: 0.5% of rated speed

Speed variation range:1:100

With Encoder (Use EBA

or EBB card)

Regulation:

± 0.1% of rated speed with analog input of 14 bits (EBA);

± 0.1% of rated spedd wth digital reference (keyboard, serial, Fieldbus,

Electronic Potetionmeter, multispeed);

± 0.1% of rated speed with analog input of 10 bits (CC9)

Inputs

Analog

2 Programmable differential inputs ( 10 bits ): 0 to 10 V, 0 to 20 mA ou 4 to 20 mA

1 Programmable bipolar input ( 14 bits ): -10 to + 10 V, 0 to 20 mA or 4...20 mA 1)

1 Programmable isolated input ( 10 bits ): 0 to 10 V, 0 a 20 mA or 4 to 20 mA 1)

1 Programmable isolated input ( 10 bits ): 0 to 10 V, 0 a 20 mA or 4 to 20 mA

Digital

8 Programmable isolated inputs: 24 Vdc

1 Programmable isolated input: 24 Vdc 1)

1 Programmable isolated input: 24 Vdc ( for motor PTC thermistor) 1)

Outputs

Analog

2 Programmable outputs ( 11 bits ) : 0 to 10 V

2 Programmable bipolar outputs ( 14 bits ) : (-10 to + 10) V1)

2 Programmable isolated outputs ( 11 bits ) : 0 to 20 mA or 4 to 20 mA 1)

2 Programmable isolated outputs ( 11 bits ) : 0 to 20 mA or 4 to 20 mA

Relay 5 Programmable outputs, contacts NA/NF ( NO/NC ) : 240 Vac, 1 A

Transistor 2 DC Programmable isolated outputs: 24 Vdc, 50 mA 1)

Communication

Serial InterfaceRS-232 (point to point)

RS-485, isolated via EBA or EBB cards (multi-point up to 30 inverters) 1)

FieldBus NetworksModbus RTU (embedded software) via serial interface RS-485

Ethernet, Profi bus DP or DeviceNet via additional kits KFB 1)

SafetyProtections

(memories of the last 100 faults/

alarms with date and time)

Overvoltage in the circuit: intermediate Output short-circuit

Undervoltage in the circuit: intermediate Output ground-short-circuit

Overtemperature in the inverter and the motor External fault

Overcurrent in the output Failed self-test and programming

Motor overload (I x t) Failed self-test and programming

Overload in braking resistor Phase fault in power supply

Failed CPU (Watchdog) / EPROM Interface MMI-MVW-01 connection fault

Incremental Encoder fault

1) Optional

MVW 01 - Technical Data

101


www.pamensky.com

Compliances /

Standards

Electromagnetic

compatibility

EMC directive 89 / 336 / EEC – industrial environment

CEI Standard - IEC 61800-3 (EMC – Emisson and Immunity)

CEI - IEC 61800

Adjustable Speed Electrical Power Drive System

Part 4 – General Requirements

Part 5 – Safety Requirements

Keypad

Commands

Start / Stop, General Functions Programming

Increase / Decrease Speed

JOG, FWD/VER and Local/Remote

Monitoring

Speed Reference (rpm) Output Current (A)

Motor Speed (rpm) Output Voltage (V)

Speed Proportional Value (Ex: ft/min) Drive Status

Output Frequency (Hz) Status of Digital Inputs

DC Link Voltage (V) Status of Digital Outputs

Motor Torque (%) Status of Relay Outputs

Output Power (kW) Analog Inputs Value

Hours Powered Up (h) 100 Last Faults with Date and Time

Hours Enabled (h) Fault / Alert Messages

Control features

Standard

Keypad with LCD + LED displays

Password to protect drive programming

LCD display language selection: English, Spanish and Portuguese

Fault auto-diagnosis and auto-reset

Parameters reset to factory or user default

Inverter Self-tuning to motor and load (Vector Modes)

Specifi c unit indication (Ex: l/s, t/h, %, etc.)

Slip compensation (V / Hz Mode)

Manual and Automatic Torque Boost – I x R (V / Hz Mode)

Adjustable V / Hz Curve (V / Hz Mode)

Minimum and maximum speed limits

Maximum current limit

Adjustable motor overload protection

Adjustable digital gain and offset for the analog inputs

Adjustable digital gain for the analog outputs

JOG function

JOG + / JOG – Function (momentary speed increase/decrease)

COPY Function (Drive Keypad or Keypad Drive)

Comparison functions for the digital outputs:

N* > Nx; N > Nx; N < Nx ; N = 0; N = N*; Is > Ix ; Is < Ix; T > Tx and T < Tx

Where: N = Motor speed; N* = Speed reference; Is = Output Current and T = Motor torque

Linear and “S type” ramps / double ramp

Independent acceleration and deceleration ramps

Multi-speed function (up to 8 preset speeds)

Special resources (Hour meter and Wattmeter)

Overlapped PID Regulator (for automatic level, fl ow, pressure, and weight control)

Direction of Rotation selection (FWD/REV)

Local / Remote Operation selection

Flying Start function (restart with a spinning load)

Critical Speed Avoidance (Skip Speed)

Ride-Through function (operation during momentary power loss)

Built-in Modbus RTU (needs the RS-232 or RS-485 interface)

Options

NEMA 4 Remote Keypad (LCD display)

Remote Keypad cable (3.3, 6.6, 10, 16, 25 and 35 ft)

Remote Keypad frame kit

Expansion Boards with special functions

Profi bus-DP

DeviceNet

SUPERDRIVE G2 Kit with RS-232 Serial Interface Communication (Drive - PC)

MVW 01 - Technical Data

101

2.1Soft Starters

www.pamensky.com

SSW 05 Plus - Soft Starter

The SSW-05 Plus Micro Soft-Starters, with DSP control (Digital Signal Processor) have been

designed to supply excellent performance during starting and stopping of electric motors with an

excellent cost effectiveness ratio. The Operator Interface allows easy parameter setting, simplifying

the start-up and operation activities. The SSW-05 Plus Micro Soft-Starters are compact, optimizating

space in electrical panels. The SSW-05 Plus already incorporates protection for the driven motor.

Standard Features

• 208 - 460V, 460-575V 50/60Hz input power

supply

• Duty cycle: 300% rated current during 10

seconds, 4 starts per hour

• Built-in bypass contacts

• One digital input for Start/Stop

(90 - 250 Vac)

• One digital input for Fault Reset

(90 - 250 Vac)

• One relay output for Run indication

(1 Amp - 250V)

• One relay output for Full Voltage indication

(1 Amp - 250V)

• RS-232 serial port

• Adjustable acceleration and deceleration

ramps (1 - 20 seconds)

• Adjustable pedestal voltage

(30 - 80% of line voltage)

• Protective features: Motor overload, over

current and locked rotor, SCR overload,

phase loss and phase sequence

• DIN rail or direct mount


(1000m) altitude, 90% non-condensing

humidity

Optional Features

• Remote Keypad

• PC Programming Software

101

Soft Starters2.2

www.pamensky.com

SSW-05 - Part Number Specifi cation

9

Z

7

--

8

--

6

P

5

E

4

2246

3

T

2

0010

1

SSW05

1. Soft-Starter line SSW-05

2. Output Rated Current 0003 = 3 A

0010 = 10 A

0016 = 16 A

0023 = 23 A

0030 = 30 A

0045 = 45 A

0060 = 60 A

0085 = 85 A



4. Power Supply Voltage: 2246 = 220 ... 460 V

4657 = 460 ... 575 V


E = English

G = German

S = Spanish

6. Product Version: P = Plus

7. Special Hardware: Blank = Standard (not available)

Hx = Optional version x (H1 ... Hn)

8. Special Software: Blank = Standard (not available)

Sx = Optional version x (S1 ... Sn)


Example: SSW050060T4657PPZ

101

2.3Soft Starters

www.pamensky.com

SSW 05 Plus - Table of Products230-460V - Three Phase


Current

(A)


FrameWeight

(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

Part NumberList

PriceHP Kw Voltage

3 0.75 0.55 230 1 1.63 IP00 5.1 x 2.3 x 5.7 SSW050003T2246EPZ $ 581

10 3 2.2 230 1 1.63 IP00 5.1 x 2.3 x 5.7 SSW050010T2246EPZ 594

16 5 3.7 230 1 1.63 IP00 5.1 x 2.3 x 5.7 SSW050016T2246EPZ 654

23 7.5 5.5 230 1 1.63 IP00 5.1 x 2.3 x 5.7 SSW050023T2246EPZ 705

30 10 7.5 230 1 1.63 IP00 5.1 x 2.3 x 5.7 SSW050030T2246EPZ 757

45 15 11 230 2 3.68 IP00 7.3 x 3.1 x 6.8 SSW050045T2246EPZ 974

60 20 15 230 2 3.68 IP00 7.3 x 3.1 x 6.8 SSW050060T2246EPZ 1,191

85 30 22 230 2 3.68 IP00 7.3 x 3.1 x 6.8 SSW050085T2246EPZ 1,432



Current

(A)


FrameWeight

(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

Part NumberList

PriceHP Kw Voltage

3 1.5 1.1 460 1 1.63 IP00 5.1 x 2.3 x 5.7 SSW050003T2246EPZ $ 581

10 5 307 460 1 1.63 IP00 5.1 x 2.3 x 5.7 SSW050010T2246EPZ 594

16 10 7.5 460 1 1.63 IP00 5.1 x 2.3 x 5.7 SSW050016T2246EPZ 654

23 15 11 460 1 1.63 IP00 5.1 x 2.3 x 5.7 SSW050023T2246EPZ 705

30 20 15 460 1 1.63 IP00 5.1 x 2.3 x 5.7 SSW050030T2246EPZ 757

45 30 22 460 2 3.68 IP00 7.3 x 3.1 x 6.8 SSW050045T2246EPZ 974

60 40 30 460 2 3.68 IP00 7.3 x 3.1 x 6.8 SSW050060T2246EPZ 1,191

85 60 45 460 2 3.68 IP00 7.3 x 3.1 x 6.8 SSW050085T2246EPZ 1,432



Current

(A)


FrameWeight

(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

Part NumberList

PriceHP Kw Voltage

3 2 1.5 575 1 1.63 IP00 5.1 x 2.3 x 5.7 SSW050003T4657EPZ $ 581

10 7.5 5.5 575 1 1.63 IP00 5.1 x 2.3 x 5.7 SSW050010T4657EPZ 594

16 10 7.5 575 1 1.63 IP00 5.1 x 2.3 x 5.7 SSW050016T4657EPZ 654

23 20 15 575 1 1.63 IP00 5.1 x 2.3 x 5.7 SSW050023T4657EPZ 705

30 25 18.5 575 1 1.63 IP00 5.1 x 2.3 x 5.7 SSW050030T4657EPZ 757

45 40 30 575 2 3.68 IP00 7.3 x 3.1 x 6.8 SSW050045T4657EPZ 974

60 50 37 575 2 3.68 IP00 7.3 x 3.1 x 6.8 SSW050060T4657EPZ 1,191

85 75 55 575 2 3.68 IP00 7.3 x 3.1 x 6.8 SSW050085T4657EPZ 1,432

101

Soft Starters2.4

www.pamensky.com

SSW 05 - AccessoriesAccessories

Keypad and Keypad Cables


Remote Keypad with LED Display SSW05HMIRS $130







SSW 05 - Technical Data

Power Supply

Voltage220 - 460 Vac (+10%, -15%)

460 - 575 Vac (+10%, -15%)

Frequency 50 / 60 Hz

Electronic Supply Switched mode power supply (90 – 250 Vac )

Enclosure Injected Plastic Case IP00

ControlMethod Motor Voltage Variation

CPU DSP type microprocessor

Starting Duty Cycle Standard 300% ( 3 x Inom. ) during 10 s, 4 starts per hour

Inputs Digital1 input for starting and stopping

1 input for error reset

Outputs Digital1 relay output for full voltage indication (By-Pass)

1 relay output for operation indication

Communication Serial Interface RS-232C

Safety Protections

Motor overload

Phase sequence

Phase loss

Locked rotor

SCRs overload

Overcurrent

Internal fault (watchdog)

Functions Starting Voltage 30 - 80% of the rated voltage

Resources

Programmable Acceleration

Ramp1 – 20 s

Programmable Deceleration

RampOff – 20 s

Motor Rated Current and Soft-

Starter Rated Current Ratio30 - 100%

Ambient

Temperature 0 ... 55ºC - standard operation at rated current

Humidity 0 ... 90% non condensing

Altitude0 ... 1000 m (3,300 ft) - standard operation at rated current

1000...4000m - with current derating (1%/ 100 m (328 ft) above 1000m (13.300ft)

Finishing Color Ultra mat gray (cover) and ultra mat blue (base) WEG standard

Installation Fixing Fixing by bolts or assembly on DIN 35 mm rail

Conformities /

Standards

Safety UL 508 Standard – Industrial Control Equipment / IRAM

Low Voltage IEC 60947-4-2

EMC EMC Directive 89 / 336 / EEC - Industrial Environment

101

2.5Soft Starters

www.pamensky.com

SSW 06 - Soft StarterWEG SSW-06 series soft-starters are micro-

processor controlled and designed to start and

stop induction motors. Excellent acceleration

and deceleration control is achieved with an

optimized cost to benefi t ratio.

Standard Features

• 220 - 575V, 50/60Hz input power supply

(-15/+10%)

• Built-in run rated (AC1) bypass contactor

• Duty cycle: 300% full load amps for 30

seconds, 10 starts per hour

• Voltage ramp or current limit start modes

• Detachable keypad with dual display

(LCD and LED) and copy function

• 90 - 250Vac auxiliary control voltage

• Single 32 bit RISC processor based control

board

• IP00 protected chassis enclosure

• Six isolated 24Vdc programmable digital

inputs

• Three programmable relay outputs (2 Amp -

250V)

• One 0 - 10Vdc programmable analog output

• One 4 - 20mA programmable analog output

• Motor PTC thermistor input

• RS-232 serial interface

• Adjustable acceleration (1-999 seconds) and

deceleration ramps (0 - 299 seconds)

• Adjustable pedestal voltage (25 - 90% of line

voltage)

• Current limitation from 150-500% torque

control

• Diagnostic features: Motor overload, over

current and phase loss, motor immediate

over and under current, SCR over

temperature and fault, line phase loss and

phase sequence, line over and under voltage

• Display readings: Motor current, voltage, kW

and power factor, line voltage and frequency,

four last fault trips, run and power-up timers


ft (1000m) altitude, 90% non-condensing

humidity

• Braking capabilities: Reverse Braking, Optimal

Braking, DC Braking

• ModBUS ( Built-in)

Optional Features

• RS-485 serial interface

• Remote keypad cables and mounting frame

• PC programming software

• Profi bus Expansion Board

• DeviceNet Expansion Board

• Ethernet TCP/IP

• USB Communication Kit

101

Soft Starters2.6

www.pamensky.com


1 2 3 4 5 6 7 8 9 1110

ZS1------OP2223T0085 SSW06

1. SSW-06 Soft Starter

2. Output Rated Current 0010 = 10A

0016 = 16A

0023 = 23A

0030 = 30A

0045 = 45A

0060 = 60A

0085 = 85A

0130 = 130A

0170 = 170A

0205 = 205A

0255 = 255A

0312 = 312A

0365 = 365A

0412 = 412A

0480 = 480A

0604 = 604A

0670 = 670A

0820 = 820A

0950 = 950A

1100 = 1100A

1400 = 1400A



4. Power Supply Voltage: 2257 = 220… 575 V

5769 = 575... 690V


E = English

S = Spanish


O = With options

7. Degree of Protection (IP):

blank = Standard (see technical specifi cations table)


Blank = Standard (with LED + LCD HMI)

SI = Without HMI

9. Special Hardware: Blank = Standard

H1 = Fan 115V (950A model)

H2 = Fan 220V (950A up to 1400A model)

10. Special Software: Blank = Standard

S1 = optional with special sofware version


Note: 1 - Communication kits are optional

2 - From 950A up to 1400A models the ventilation voltage must be defi ned (H1 or H2)

3 - 575... 690V are not UL certifi ed

4 - Up to 820A standard built-in bypass

101

2.7Soft Starters

www.pamensky.com

SSW 06 - Table of Products230V - Three Phase


Current

(A)


FrameWeight

(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

Part NumberList

Price3 Leads 6 Leads

VoltageHP Kw HP Kw

10 3 2.2 - - 230 1 7.3 IP20 10.08 x 5.20 x 7.16 SSW060010T2257ESZ $1,559

16 5 3.7 - - 230 1 7.3 IP20 10.08 x 5.20 x 7.16 SSW060016T2257ESZ 1,608

23 7.5 5.5 - - 230 1 7.3 IP20 10.08 x 5.20 x 7.16 SSW060023T2257ESZ 1,768

30 10 7.5 - - 230 1 7.3 IP20 10.08 x 5.20 x 7.16 SSW060030T2257ESZ 1,915

45 15 11 25 18.5 230 2 18.7 IP00 14.57 x 5.20 x 9.61 SSW060045T2257ESZ 2,223

60 20 15 30 22 230 2 18.7 IP00 14.57 x 5.20 x 9.61 SSW060060T2257ESZ 2,453

85 30 22 50 37 230 2 18.7 IP00 14.57 x 5.20 x 9.61 SSW060085T2257ESZ 3,008

130 50 37 75 55 230 2 18.7 IP00 14.57 x 5.20 x 9.61 SSW060130T2257ESZ 3,760

170 60 45 100 75 230 3 40.8 IP00 17.32 x 8.78 x 10.94 SSW060170T2257ESZ 4,605

205 75 55 125 90 230 3 40.8 IP00 17.32 x 8.78 x 10.94 SSW060205T2257ESZ 5,791

255 100 75 150 110 230 4 91.5 IP00 21.65 x 14.57 x 12.24 SSW060255T2257ESZ 8,021

312 125 90 200 150 230 4 91.5 IP00 21.65 x 14.57 x 12.24 SSW060312T2257ESZ 8,509

365 150 110 250 185 230 4 91.5 IP00 21.65 x 14.57 x 12.24 SSW060365T2257ESZ 8,643

412 150 110 - - 230 5 121 IP00 25.59 x 14.57 x 13.66 SSW060412T2257ESZ 10,142

480 200 150 - - 230 5 121 IP00 25.59 x 14.57 x 13.66 SSW060480T2257ESZ 12,556

604 250 185 - - 230 5 121 IP00 25.59 x 14.57 x 13.66 SSW060604T2257ESZ 14,005

670 250 185 - - 230 6 265 IP00 31.30 x 21.26 x 14.05 SSW060670T2257ESZ 15,936

820 300 225 - - 230 6 265 IP00 31.30 x 21.26 x 14.05 SSW060820T2257ESZ 18,832

950 350 260 - - 230 7 236 IP00 33.27 x 22.44 x 13.66 SSW060950T2257ESZ 28,491

1100 450 330 - - 230 8 480 IP00 45.16 x 26.97 x 17.01 SSW061100T2257ESZ 35,737

1400 500 370 - - 230 8 480 IP00 45.16 x 26.97 x 17.01 SSW061400T2257ESZ 45,876

460V - Three Phase


Current

(A)


FrameWeight

(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

Part NumberList


VoltageHP Kw HP Kw

10 5 3.7 - - 460 1 7.3 IP20 10.08 x 5.20 x 7.16 SSW060010T2257ESZ $1,559

16 10 7.5 - - 460 1 7.3 IP20 10.08 x 5.20 x 7.16 SSW060016T2257ESZ 1,608

23 15 11 - - 460 1 7.3 IP20 10.08 x 5.20 x 7.16 SSW060023T2257ESZ 1,768

30 20 15 - - 460 1 7.3 IP20 10.08 x 5.20 x 7.16 SSW060030T2257ESZ 1,915

45 30 22 60 45 460 2 18.7 IP00 14.57 x 5.20 x 9.61 SSW060045T2257ESZ 2,223

60 40 30 75 55 460 2 18.7 IP00 14.57 x 5.20 x 9.61 SSW060060T2257ESZ 2,453

85 60 45 100 75 460 2 19 IP00 14.57 x 5.20 x 9.61 SSW060085T2257ESZ 3,008

130 100 75 150 110 460 2 19 IP00 14.57 x 5.20 x 9.61 SSW060130T2257ESZ 3,760

170 125 90 200 150 460 3 41 IP00 17.32 x 8.78 x 10.94 SSW060170T2257ESZ 4,605

205 150 110 250 185 460 3 41 IP00 17.32 x 8.78 x 10.94 SSW060205T2257ESZ 5,791

255 200 150 350 260 460 4 91 IP00 21.65 x 14.57 x 12.24 SSW060255T2257ESZ 8,021

312 250 185 450 330 460 4 91 IP00 21.65 x 14.57 x 12.24 SSW060312T2257ESZ 8,509

365 300 225 500 370 460 4 91 IP00 21.65 x 14.57 x 12.24 SSW060365T2257ESZ 8,643

412 350 260 550 410 460 5 121 IP00 25.59 x 14.57 x 13.66 SSW060412T2257ESZ 10,142

480 400 300 650 485 460 5 121 IP00 25.59 x 14.57 x 13.66 SSW060480T2257ESZ 12,556

604 500 370 800 600 460 5 121 IP00 25.59 x 14.57 x 13.66 SSW060604T2257ESZ 14,005

670 550 410 900 670 460 6 265 IP00 31.30 x 21.26 x 14.05 SSW060670T2257ESZ 15,936

820 600 450 1150 820 460 6 265 IP00 31.30 x 21.26 x 14.05 SSW060820T2257ESZ 18,832

950 700 525 1350 1000 460 7 236 IP00 33.27 x 22.44 x 13.66 SSW060950T2257ESZ 28,491

1100 800 600 1600 1175 460 8 480 IP00 45.16 x 26.97 x 17.01 SSW061100T2257ESZ 35,737

1400 1050 775 2000 1475 460 8 480 IP00 45.16 x 26.97 x 17.01 SSW061400T2257ESZ 45,876

Notes: 3 Leads - Inline Connection

6 Leads - Inside Delta Connection

101

Soft Starters2.8

www.pamensky.com



Current

(A)


FrameWeight

(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

Part NumberList


VoltageHP Kw HP Kw

10 7.5 5.5 - - 575 1 7.3 IP20 10.08 x 5.20 x 7.16 SSW060010T5257ESZ $1,559

16 10 7.5 - - 575 1 7.3 IP20 10.08 x 5.20 x 7.16 SSW060016T5257ESZ 1,608

23 20 15 - - 575 1 7.3 IP20 10.08 x 5.20 x 7.16 SSW060023T5257ESZ 1,768

30 25 18.5 - - 575 1 7.3 IP20 10.08 x 5.20 x 7.16 SSW060030T5257ESZ 1,915

45 40 30 75 55 575 2 18.7 IP00 14.57 x 5.20 x 9.61 SSW060045T5257ESZ 2,223

60 50 37 100 75 575 2 18.7 IP00 14.57 x 5.20 x 9.61 SSW060060T5257ESZ 2,453

85 75 55 150 110 575 2 19 IP00 14.57 x 5.20 x 9.61 SSW060085T5257ESZ 3,008

130 125 90 200 150 575 2 19 IP00 14.57 x 5.20 x 9.61 SSW060130T5257ESZ 3,760

170 150 110 300 220 575 3 41 IP00 17.32 x 8.78 x 10.94 SSW060170T5257ESZ 4,605

205 200 150 350 260 575 3 41 IP00 17.32 x 8.78 x 10.94 SSW060205T5257ESZ 5,791

255 250 185 450 330 575 4 91 IP00 21.65 x 14.57 x 12.24 SSW060255T5257ESZ 8,021

312 300 225 550 410 575 4 91 IP00 21.65 x 14.57 x 12.24 SSW060312T5257ESZ 8,509

365 350 260 650 485 575 4 91 IP00 21.65 x 14.57 x 12.24 SSW060365T5257ESZ 8,643

412 450 330 750 550 575 5 121 IP00 25.59 x 14.57 x 13.66 SSW060412T5257ESZ 10,142

480 500 370 850 630 575 5 121 IP00 25.59 x 14.57 x 13.66 SSW060480T5257ESZ 12,556

604 600 450 1100 800 575 5 121 IP00 25.59 x 14.57 x 13.66 SSW060604T5257ESZ 14,005

670 650 485 1200 900 575 6 265 IP00 31.30 x 21.26 x 14.05 SSW060670T5257ESZ 15,936

820 750 550 1500 1200 575 6 265 IP00 31.30 x 21.26 x 14.05 SSW060820T5257ESZ 18,832

950 850 630 1750 1290 575 7 236 IP00 33.27 x 22.44 x 13.66 SSW060950T5257ESZ 28,491

1100 1000 750 2000 1475 575 8 480 IP00 45.16 x 26.97 x 17.01 SSW061100T5257ESZ 35,737

1400 1300 1000 2500 1850 575 8 480 IP00 45.16 x 26.97 x 17.01 SSW061400T5257ESZ 45,876

Notes: 3 Leads - Inline Connection

6 Leads - Inside Delta Connection

101

2.9Soft Starters

www.pamensky.com

SSW 06 - AccessoriesKeypad and Keypad Cables


Local Keypad with LED and LCD SSW06HMILCD $230

Remote Keypad Frame Kit KMR-SSW-06 31





7.5m (25 ft) Remote Keypad Cable (Requires CFW09KMR09) CFW09HMI097 88

10m (33 ft) Remote Keypad Cable (Requires CFW09KMR09) CFW09HMI0910 108

Communication


Profi bus DP Communication Kit KFB PD SSW06 $1,045

DeviceNet Communication Kit KFB DN SSW06 897

Interface for RS-485 Communication KRS 485 183

Ethernet/IP Communication Kit KFB ENIP SSW06 2,070

IP20 Kits


SSW06 IP20 Kit - Frame Size 2 KIT IP20 SSW06 M2 $210

SSW06 IP20 Kit - Frame Size 3 KIT IP20 SSW06 M3 236

SSW06 IP20 Kit - Frame Size 4 & 5 KIT IP20 SSW06 M4/M5 254

SSW06 IP20 Kit - Frame Size 6 KIT IP20 SSW06 M6 517

I/O Expansion


I/Os Expansion Module for SoftPLC applications SSW06 KEIO $758

101

Soft Starters2.10

www.pamensky.com


Power Supply

Power 220 to 575 Vac -15% to +10%, or 198 to 632 Vac

Control 110 to 230 Vac -15% to +10%, or 94 to 253 Vac

Fan

Models from 255 to 820 A: 115 Vac (104 to 127) Vac / 230 vac (207 to 253) Vac

Model 950 A: 115 Vac (103,5 to 122) Vac / 230 Vac (207 to 243,8) Vac

Models from 1100 to 1400 A: 230 vac (207 to 243,8) Vac

Frequency 50 to 60 Hz (+/- 10%), or 45 to 66 Hz

Degree of protection Metallic cabinet IP00

Control

Control method Motor voltage variation (Three phase induction motor)

CPU 32-Bit RISC microcontroller

Types of control

Voltage ramp

Current limitation

Current limitation ramp

Pump control

Torque control 1, 2 or 3 points

Starting Duty cycles

(10 starts / hour)

Rated 300% (3 x I nom.) during 30 s for 3-cable connection and during 25 s for 6-cable connection

Heavy450% (4,5 x I nom.) during 30 s with 33% rated current reduction;

450 % ( 4,5 x I nom.) during 25 s for 6-cable connection

Inputs Digital5 x 24 Vdc isolated programmable inputs

1 x 24 Vdc insolated programmable input for motor PTC

Outputs

Relay 3 programmable outputs 250 Vac / 2 A: (2 x NA) + (1 x NO + NC – Fault)

Analog1 Programmable output (11 bits) 0…10 Vdc

1 programmable output (11 bits) 0...20 mA or 4...20 mA

Safety Protections

Overvoltage Power supply phase loss

Undervoltage Output phase loss (motor)

Voltage imbalance Thyristor failure

Undercurrent CPU failure (watch dog)

Overcurrent Programming error

Current imbalance Serial communication error

Overload (motor) – i²t Self-check error

Thyristors over temperature HMI-SSW06 communication error

Motor over temperature / PTC Starting time expired

Phase sequence failure Fieldbus communication error

External fault Serial communication error

Open by-pass contact failure (1) Undervoltage in the electronic board

Closed by-pass contact failure (1) Frequency out of range

Overcurrent in the by-pass (1) Undercurrent before by-pass closing (1)

Functions/resources Standard

Removable human-machine interface with double display LED + LCD

Programming access password

HMI language selection: Portuguese, English, Spanish and German

Control type selection: Voltage ramp, current limitation, current

Limitation ramp, pump control and torque control

Local/ Remote operation selection

Self-checking and automatic fault reset

Oriented start-up according to the control type

Standard or within-the-delta (6 leads) connection

All protections and functions available in both types of connection to the motor

PUMP CONTROL function (protection against “water hammer” in pumps)

COPY function (Soft-starter to HMI or HMI to soft-starter)

Built-in by-pass for the models 85 to 820 A

Serial interface RS-232 with Modbus RTU protocol. RS-485 optional

Insolated input for motor PTC

Standard or user parameters reset (Brings back the standard or user values)

Special features: Running hours

Programmable over and undervoltage and voltage imbalance between phases

Programmable over and undercurrent and current imbalance between phases

Under and overcurrent before by-pass

Programmable immediate overcurrent

Programmable time for immediate overcurrent

Programmable immediate undercurrent

Programmable time for immediate undercurrentProgrammable line nominal voltageFully programmable voltage rampProgrammable current limitationProgrammable current rampProgrammable pump controlFully fl exible torque controlAuto reset of the programmable thermal memory Thermal class protection (motor overload) programmable from class 5 to 45.

101

2.11Soft Starters

www.pamensky.com

Notes: (1) Models from 10A to 820A (2) Models from 85A to 1400A approved


Functions/resourcesOptional

Frame for remote HMI

Cable to interconnect the soft-starter with the remote HMI 1, 2, 3 and 5 m

Rs-485 communication kit

PROFIBUS-DP communication kit

Device Net communication kit

IP20 protection for the models from 85 up to 820 A

Human-Machine

Interface

(HMI-SSW06-LCD)

Controls Start, stop, reset and parameterization (main functions programming)

Supervision

Increase and decrease parameters and their values

Motor current (% Soft-starter In)

Motor current (% Motor In)

Motor current (A)

Line frequency (0…99.9 Hz)

Line voltage (0…999 V)

Output voltage (0…999 V)

Motor torque (% motor I n)

Load active power – (kW)

Load apparent power – (kVA)

Soft-starter status

Digital and analog inputs and outputs status

Load Cos φ (0.00 – 0.99)

Energized hours

Enabled hours

Last six error codes memory

Soft-starter software version

Enviroment Conditions

Temperature0 to 55ºC (Models from 85 to 820 A) standard operation at rated current

0 to 40ºC (Models from 950 to 1400 A) standard operation at rated current

Humdity 5...90 %, non-condensing

Altitude0... 1000 m: standard operation at rated current

1000... 4000 m; with output current reduction of 1%/100 m, over 1000 m

Finishing Painting ColorCover: ultra mat gray

Cabinet: ultra mat blue

Standards

Safety UL 508 Standard – Industrial control equipment (2)

Low voltage EN 60947-4-2 Standard; LVD 73/23/EEC – Low voltage directive

EMC EMC directive 89 / 336 / EEC – Industrial environment

UL (USA) / cUL (Canadá) Underwritters Laboratories Inc. – USA (2)

CE (Europe) Certifi ed by EPCOS

IRAM (Argentina) Instituto Argentino de Normalización (2)

C-Tick (Australia) Australian Communications Authority

101

Soft Starters2.12

www.pamensky.com

SSW 07 - Soft Starter

The SSW-07 Soft Starter from WEG was designed for high

performance starting and stopping while providing an excellent

cost-benefi t ratio. The Starter is designed to be easily set-up and

makes start up and daily activities simpler. Excellent for applications

with heavy loads, the SSW-07 is suitable for Crusher applications

as well as conveyors, hammer mills, centrifuges and many others.

Standard Features

• Strong reduction on mechanical stresses

over the coupling and transmission devices

(gearboxes, pulleys, gears, conveyors, etc.)

during the start

• Eliminates mechanical shock

• Increases motor and machine mechanical

equipment lifetime due to the elimination of

mechanical shock

• Easy operation, setup, maintenance &

installation

• Simple electric installation

• Operates in environments up to 55ºC (without

current reduction for all models)

• Integral, electronic motor protection

• Built-in electronic thermal relay

• Avoids the “Water Hammer” in pump

applications

• Limitation of voltage drop during start

• Universal voltage (220 to 575 Vac)

• Switched type power supply with EMC fi lter

for the control electronics (110 to 240 Vac)

• Voltage monitoring of the electronics to back-

up l2t values (thermal image)

• Local Keypad

Optional Features

• RS 485 Serial Interface

• RS 232 Serial Interface

• Remote keypad

• PTC Kit

• IP20 Kit for M3

101

2.13Soft Starters

www.pamensky.com

1. SSW-07 Soft Starter

2. Output Rated Current 0017 = 17A

0024 = 24A

0030 = 30A

0045 = 45A

0061 = 61A

0085 = 85A

0130 = 130A

0171 = 171A

0200 = 200A

0255 = 255A

0312 = 312A

0365 = 365A

0412 = 412A



4. Power Supply Voltage: 5 = 220 to 575 V


O = With options


IP = IP20 for models from 130 A to 412 A

7. Special Hardware: Blank = Standard

8. Special Software: Blank = Standard



1 2 3 4 5 6 7 8 9

Z------S5T0017SSW07

101

Soft Starters2.14

www.pamensky.com



Current

(A)


FrameWeight

(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

Part NumberList

PriceHP Kw Voltage

17 5 3.7 230 1 2.90 iP20 6.38 x 3.74 x 6.18 SSW070017T5SZ $1,266

24 7,5 5.5 230 1 2.90 iP20 6.38 x 3.74 x 6.18 SSW070024T5SZ 1,346

30 10 7.5 230 1 2.90 iP20 6.38 x 3.74 x 6.18 SSW070030T5SZ 1,386

45 15 11 230 2 7.28 iP20 8.19 x 5.67 x 7.99 SSW070045T5SZ 1,558

61 20 15 230 2 7.28 iP20 8.19 x 5.67 x 7.99 SSW070061T5SZ 1,736

85 30 22 230 2 7.28 iP20 8.19 x 5.67 x 7.99 SSW070085T5SZ 2,070

130 50 37 230 3 16.80 IP00 10.90 x 8.78 x 8.66 SSW070130T5SZ 2,560

171 60 45 230 3 16.80 IP00 10.90 x 8.78 x 8.66 SSW070171T5SZ 3,210

200 75 55 230 3 16.80 IP00 10.90 x 8.78 x 8.66 SSW070200T5SZ 3,778

255 100 75 230 4 20.32 IP00 13.00 x 8.94 x 9.53 SSW070255T5SH1Z 5,026

312 125 90 230 4 20.32 IP00 13.00 x 8.94 x 9.53 SSW070312T5SH1Z 5,457

365 150 110 230 4 20.32 IP00 13.00 x 8.94 x 9.53 SSW070365T5SH1Z 5,671

412 150 110 230 4 20.32 IP00 13.00 x 8.94 x 9.53 SSW070412T5SH1Z 6,655

460V - Three Phase


Current

(A)


FrameWeight

(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

Part NumberList

PriceHP Kw Voltage

17 10 7.5 460 1 2.90 iP20 6.38 x 3.74 x 6.18 SSW070017T5SZ $1,266

24 15 11 460 1 2.90 iP20 6.38 x 3.74 x 6.18 SSW070024T5SZ 1,346

30 20 15 460 1 2.90 iP20 6.38 x 3.74 x 6.18 SSW070030T5SZ 1,386

45 30 22 460 2 7.28 iP20 8.19 x 5.67 x 7.99 SSW070045T5SZ 1,558

61 40 30 460 2 7.28 iP20 8.19 x 5.67 x 7.99 SSW070061T5SZ 1,736

85 60 45 460 2 7.28 iP20 8.19 x 5.67 x 7.99 SSW070085T5SZ 2,070

130 100 75 460 3 16.80 IP00 10.90 x 8.78 x 8.66 SSW070130T5SZ 2,560

171 125 90 460 3 16.80 IP00 10.90 x 8.78 x 8.66 SSW070171T5SZ 3,210

200 150 110 460 3 16.80 IP00 10.90 x 8.78 x 8.66 SSW070200T5SZ 3,778

255 200 160 460 4 20.32 IP00 13.00 x 8.94 x 9.53 SSW070255T5SH1Z 5,026

312 250 185 460 4 20.32 IP00 13.00 x 8.94 x 9.53 SSW070312T5SH1Z 5,457

365 300 220 460 4 20.32 IP00 13.00 x 8.94 x 9.53 SSW070365T5SH1Z 5,671

412 350 260 460 4 20.32 IP00 13.00 x 8.94 x 9.53 SSW070412T5SH1Z 6,655

575V - Three Phase


Current

(A)


FrameWeight

(lb)

Degree of

Protection

Dimensions

(in)

H x W x D

Part NumberList

PriceHP Kw Voltage

17 15 11 575 1 2.90 iP20 6.38 x 3.74 x 6.18 SSW070017T5SZ $1,266

24 20 15 575 1 2.90 iP20 6.38 x 3.74 x 6.18 SSW070024T5SZ 1,346

30 25 18.5 575 1 2.90 iP20 6.38 x 3.74 x 6.18 SSW070030T5SZ 1,386

45 40 30 575 2 7.28 iP20 8.19 x 5.67 x 7.99 SSW070045T5SZ 1,558

61 50 37 575 2 7.28 iP20 8.19 x 5.67 x 7.99 SSW070061T5SZ 1,736

85 75 55 575 2 7.28 iP20 8.19 x 5.67 x 7.99 SSW070085T5SZ 2,070

130 125 90 575 3 16.80 IP00 10.90 x 8.78 x 8.66 SSW070130T5SZ 2,560

171 150 110 575 3 16.80 IP00 10.90 x 8.78 x 8.66 SSW070171T5SZ 3,210

200 200 150 575 3 16.80 IP00 10.90 x 8.78 x 8.66 SSW070200T5SZ 3,778

255 250 185 575 4 20.32 IP00 13.00 x 8.94 x 9.53 SSW070255T5SH1Z 5,026

312 300 220 575 4 20.32 IP00 13.00 x 8.94 x 9.53 SSW070312T5SH1Z 5,457

365 350 260 575 4 20.32 IP00 13.00 x 8.94 x 9.53 SSW070365T5SH1Z 5,671

412 400 330 575 4 20.32 IP00 13.00 x 8.94 x 9.53 SSW070412T5SH1Z 6,655

101

2.15Soft Starters

www.pamensky.com

SSW 07 - AccessoriesKeypad and Keypad Cables


Local Keypad HMI-LOCAL-SSW07/08 $160

Remote Keypad Kit HMI-REMOTE-SSW07 312







Communication


RS-232 Communication Kit KRS-232-SSW07/08 $128

RS-485 Communication Kit KRS-485-SSW07/08 150

Kits


Ventilation Kit M2 (Frame Size 2, 45 to 85A) SSW07M2V.K $70

Ventilation Kit M3 (Frame Size 3, 130 to 200A) SSW07M3V.K 101

PTC Kit for motor KITPTCSSW07/08 118

IP20 Kit for M3 (Frame Size 3, 130 to 200A) KITIP20SIZE3 60

IP20 Kit for M4 (Frame Size 4, 255 to 412A) KITIP20SIZE4 115

101

Soft Starters2.16

www.pamensky.com

Power Supply

Power 220 to 575 Vac

Control 110 to 240 Vac (-15% to +10%), or 94 to 264 Vac

Frequency 50 to 60 Hz (+/- 10%), or 45 to 66 Hz

Degree of

protectionInjected plastic case

IP20 in models from 17 to 85 A

IP00 in models from 130 to 200 A (IP20 as option)

Control

Control Method Motor Voltage Variation

CPU DSP type microprocessor (Digital Signal Processor)

Types of Control Voltage ramp

Current limit

Starting Cycle (1) Normal 300% (3 x Inom.) during 30 s, 10 starts per hour ( every 6 minutes)

Inputs Digital 3 isolated programmable inputs

Outputs Relay 2 relays with NO contacts, 240Vac, 1A, programmable functions

Starting Duty Cycle

Normal 17 - 30A 300%

Normal 45 - 200A 3 starts

With optional ventilation kit 45-200A 10 starts

Safety

Protections (Standard)

Overcurrent Locked rotor

Overcurrent before By-pass Excess starting time

Phase loss Frequency outside tolerance

Inverted phase sequence By-pass contact open

Overtemperature in power heatsink Undervoltage in control supply

Motor overload (class 5 to 30)

Protections (with Accessory)

Undercurrent Programming error

Current imbalance Serial communication error

Undercurrent before by-pass HMI communication error

External fault Overtemperature in motor PTC

Functions /

ResourcesStandard

Voltage ramp (Initial voltage: 30% to 90%)

Current limitation (150% to 450% of SSW-07 rated current)

Starting time (1 to 40s)

Kick Start (Off - 0.2 to 2s)

Deceleration ramp ( 0 to 40s)

Motor and SSW-07 current relation (50% to 100%)

Faults automatic-reset

Thermal memory automatic-reset

Factory standard reset

Soft-starter built-in By-pass

Programming

Accessory

(HMI or Serial

communication)

Command On, Off / Reset and Parameterization (function programming)

Additional Functions/Resources

Starting time up to 999s

Deceleration time up to 999s

Program enabling password

Selection for Local / Remote operation

COPY function (SSW-07 >>> HMI and HMI >>> SSW-07)

Programmable rated voltage

Supervision

Motor current (%Soft-Starter In)

Motor current (%motor In)

Motor current (A)

Current indication in each phase R-S-T

Supply network frequency

Apparent power supplied to load (kVA)

Soft-Starter status

Digital input and output status

Last 4 faults

Soft-Starter Software Version

Heatsink temperature

Motor thermal protection status

Accessories and

Options Options

Plug-in type local HMI

HMI remote Kit

5 and 10m cable for remote HMI interconnection

RS-232 communication kit

SSW-07 interconnection leads >>> PC Serial (RS-232) 3 and 10m

RS-485 communication kit

Motor PTC kit

Ventilation kit for size 2 (45 to 85 A)

Ventilation kit for size 3 (130 to 200 A)

IP20 kit for size 3 (130 to 200 A)

Finishing ColorLid: Ultra mat gray

Cabinet: Ultra mat blue

Conformities /

Standards

Safety UL 508 Standard- Industrial Control Equipment

Low voltage EN60947-4-2; LVD 2006/95/EC Standard – Low voltage Directive

EMC EMC 89/336/EEC Directive – Industrial Environment

UL (USA) / cUL (Canada) Underwriters Laboratories Inc. – USA

CE (Europe) Conformity test conducted by EPCOS

C-Tick (Australia) Australian Communication Authority


101

3.1Panels

www.pamensky.com

EDP - Enclosed Drive PanelThe Enclosed Drive Panel is an industrial general purpose AC motor control and protection

package. It is designed for simple and quick installation and start-up, requiring only input

power and output motor connections.

The Enclosed Drive Panel is built to complement the ruggedness and reliability of WEG

electric motors, providing a complete, simple, and cost effective AC motor control, monitor

and protection solution.

Standard Features

• V/Hz and Sensorless Vector Control

• 230V, 460V or 575V Input Voltage

• 2 Isolated Analog Inputs

• 6 Programmable Digital Inputs

• 3 Programmable Relay Outputs

• 2 Analog Outputs

• 150% Overload 1min

Standard Panel Includes

• Variable Frequency Drive CFW09

• Keypad Mounted to Panel Door

• Through Door Disconnect

• Control Power Transformer

• NEMA 12 Ventilated Enclosure

• Canadian Certifi cation

Optional Features

• Line Reactor

• Load Reactor

• Panel Control Option

• Start/Stop Pushbuttons

• Run/Stop/Fault Pilot Lights

• Local/Remote Selector Switch

Applications

• Pumps

• Fans

• Blowers

• Conveyors

• Rollout tables

• Agitators

• Mixers

Wall Mounted230V: 30 - 50HP: 86 - 130A

460V: 30 - 75HP: 45 - 105A

575V: 30HP: 32A

Free Standing 230V: 60 - 75HP: 180 - 240A

460V: 100 - 500HP: 142 - 600A

575V: 40 - 500HP: 44 - 472A

101

Panels3.2

www.pamensky.com

EDP - Table of Products230V

Standard Product Optional Features

Current (A) HP*

Part Number List Price Dimensions

Panel Control Line Reactor Load Reactor

CT VT CT VT Part Number List Price Part Number List Price Part Number List Price

86 105 30 40 EDP09.86/230 $18,129 60 x 36 x 16 EDP-PNLCTRL $681 EDP-KDRF24LI $741 EDP-KDRF24LO $741

105 130 40 50 EDP09105/230 $22,048 72 x 36 x 16 EDP-PNLCTRL $681 EDP-KDRF25LI $1,036 EDP-KDRF25LO $1,036



180 60 EDP09180/230 $30,104 72 x 36 x 18 EDP-PNLCTRL $681 EDP-KDRI22LI $1,390 EDP-KDRI22LO $1,390

240 75 EDP09240/230 $36,985 72 x 36 x 18 EDP-PNLCTRL $681 EDP-KDRI23LI $1,415 EDP-KDRI23LO $1,415

575V


Current (A) HP*




32 32 30 30 EDP09.32/575 $13,790 48 x 36 x 16 EDP-PNLCTRL $681 EDP-KDRD42LI $535 EDP-KDRD42LO $535

44 53 40 50 EDP09.44/575 $17,278 72 x 36 x 18 EDP-PNLCTRL $681 EDP-KDRC43LI $570 EDP-KDRC43LO $570





147 196 150 200 EDP09147/575 $42,721 72 x 72 x 18 EDP-PNLCTRL $681 EDP-KDRH44LI $1,433 EDP-KDRH44LO $1,433

211 211 200 200 EDP09211/575 $48,646 72 x 72 x 18 EDP-PNLCTRL $681 EDP-KDRI42LI $1,517 EDP-KDRI42LO $1,517

247 315 250 300 EDP09247/575 $63,850 90 x 72 x 36 EDP-PNLCTRL $681 EDP-KDRG47LI $1,675 EDP-KDRG47LO $1,675

315 343 300 350 EDP09315/575 $68,011 90 x 72 x 36 EDP-PNLCTRL $681 EDP-KDRG45LI $1,938 EDP-KDRG45LO $1,938

343 418 350 400 EDP09343/575 $84,040 90 x 72 x 36 EDP-PNLCTRL $681 EDP-KDRJ45LI $2,150 EDP-KDRJ45LO $2,150

418 472 400 500 EDP09418/575 $89,672 90 x 72 x 36 EDP-PNLCTRL $681 EDP-KDRJ43LI $2,254 EDP-KDRJ43LO $2,254

472 555 500 600 EDP09472/575 $98,022 90 x 72 x 36 EDP-PNLCTRL $681 EDP-KDRL45LI $2,675 EDP-KDRL45LO $2,675

460V


Current (A) HP*




45 54 30 40 EDP09.45/460 $14,204 48 x 36 x 16 EDP-PNLCTRL $681 EDP-KDRD2LI $644 EDP-KDRD2LO $644





142 174 100 125 EDP09142/460 $25,270 72 x 36 x 18 EDP-PNLCTRL $681 EDP-KDRH3LI $1,201 EDP-KDRH3LO $1,201

180 150 EDP09180/460 $32,953 72 x 36 x 18 EDP-PNLCTRL $681 EDP-KDRH1LI $1,673 EDP-KDRH1LO $1,673

211 150 EDP09211/460 $36,339 72 x 36 x 18 EDP-PNLCTRL $681 EDP-KDRG3LI $2,084 EDP-KDRG3LO $2,084




450 350 EDP09450/460 $64,021 72 x 72 x 24 EDP-PNLCTRL $681 EDP-KDRJ2LI $2,673 EDP-KDRJ2LO $2,673

515 400 EDP09515/460 $73,451 72 x 72 x 24 EDP-PNLCTRL $681 EDP-KDRJ1LI $2,935 EDP-KDRJ1LO $2,935

600 500 EDP09600/460 $83,399 72 x 72 x 24 EDP-PNLCTRL $681 EDP-KDRL2LI $5,055 EDP-KDRL2LO $5,055

* Please note that HP reference is for 4 pole motors (1800 RPM). To size the drive correctly please confi rm the Current (A).

Sizing table is used for approximation only, fi nal sizing subject to review of application/load details.

Standard Panel includes drive, fuse disconnect, control transformer, door mounted keypad and fi ltered fan mounted in a NEMA 12 ventilated enclosure.

Panel Control Option Includes Start/Stop Pushbuttons, Run/Stop/Fault Pilot Lights and Local/Remote Selector Switch.

101

3.3Panels

www.pamensky.com

EDP - Sample Wiring Diagram

This wiring diagram is reprinted for illustrative purposes only and may be subject to change.

101

Panels3.4

www.pamensky.com

GPH - Combination Soft StarterThe GPH Series of WEG Combination Soft Starters is an industrial general purpose

AC motor Soft Starter package designed for simple and quick installation and

start-up, requiring only input power and output motor connections. The NEMA

4/12 enclosure is ideal for dusty or wet environments. The GPH starters are built

to complement the ruggedness and reliability of WEG motors, providing a complete

and cost effective AC motor starting and protection solution.

Standard Features

• Rated 500%

• 5 - 250HP at 230V, 10 -500HP at 460V

and 15 - 500HP at 575V

• NEMA 4/12 wall mount enclosure suitable

for dusty, wet, or outdoor applications

• Circuit breaker with door mounted

operator provides built-in short circuit

protection and input power disconnect

• Automatic run rated bypass contactor

• Fused Control Power Transformer (CPT)

• Start and Stop Pushbuttons and Run and

Fault Pilot Lights on the front cover

• Keypad with protective cover mounted on

enclosure door, all parameter changes are

through the cover-mounted keypad. Dust

and water stay out of the enclosure.

• Monitoring of current, voltage, kVA and

kW can be done from the outside

Standard Panel Includes

• Soft Starter SSW 07

• Through Door Disconnect

• Control Power Transformer

• NEMA 4/12 Enclosure

Applications

• Pumps

• Fans

• Blowers

• Compressors

• Conveyors

• Mixers

• Crushers

• Saws

101

3.5Panels

www.pamensky.com

GPH - Table of Products230V

HP Current (A) Part Number List Price Dimensions

5 17 GPH070017230 $5,084 24x24x12

7.5 24 GPH070024230 $5,445 24x24x12

10 30 GPH070030230 $5,478 24x24x12

15 45 GPH070045230 $5,440 24x24x12

20 61 GPH070061230 $6,897 24x24x12

30 85 GPH070085230 $7,182 24x24x12

50 130 GPH070130230 $9,584 42x30x12

60 171 GPH070171230 $11,511 42x30x12

75 200 GPH070200230 $11,997 42x30x12

100 255 GPH070255230 $13,356 60x36x16

125 312 GPH070312230 $13,680 60x36x16

150 365 GPH070365230 $13,841 60x36x16

150 412 GPH070412230 $17,210 60x36x16

460V


10 17 GPH070017460 $5,084 24x24x12

15 24 GPH070024460 $5,445 24x24x12

20 30 GPH070030460 $5,478 24x24x12

30 45 GPH070045460 $5,440 24x24x12

40 61 GPH070061460 $6,897 24x24x12

60 85 GPH070085460 $7,182 24x24x12

100 130 GPH070130460 $9,584 42x30x12

125 171 GPH070171460 $11,511 42x30x12

150 200 GPH070200460 $11,997 42x30x12

200 255 GPH070255460 $13,356 60x36x16

250 312 GPH070312460 $13,680 60x36x16

300 365 GPH070365460 $13,841 60x36x16

350 412 GPH070412460 $17,210 60x36x16

575V


15 17 GPH070017575 $5,084 24x24x12

20 24 GPH070024575 $5,445 24x24x12

25 30 GPH070030575 $5,478 24x24x12

40 45 GPH070045575 $5,440 24x24x12

50 61 GPH070061575 $6,897 24x24x12

75 85 GPH070085575 $7,182 24x24x12

125 130 GPH070130575 $9,584 42x30x12

150 171 GPH070171575 $11,511 42x30x12

200 200 GPH070200575 $11,997 42x30x12

250 255 GPH070255575 $13,356 60x36x16

300 312 GPH070312575 $13,680 60x36x16

350 365 GPH070365575 $13,841 60x36x16

400 412 GPH070412575 $17,210 60x36x16

101

Panels3.6

www.pamensky.com

GPH - Sample Wiring Diagram

FusedDisconnect

Motor

DoorMountedKeypad

ControlTransformer120VSecondary

R

S

U

V

WT

A1

DI1

DI3

DI2

13

Fuse

Fuse

Fuse

Run

Fault

Start

Stop

14/23

24

A2

102

Industrial Control Products 4.1

www.pamensky.com

PESW - Enclosed Motor StarterWEG offers non-reversing and non-combination NEMA-4X magnetic starter up to 75HP at

460V.

Featuring components that meet IEC design standards and UL horsepower ratings, including

WEG contactors and overload relays, the PESW magnetic starters are ideal to help protect

motors and ensure smooth operation year-after-year. Assembled together in a NEMA 4X

enclosure with two options.

WEG PESW starters are recommended for all single and three phase applications where

across-the-line starters can be applied.

Standard Features

• High horsepower ratings in four compact

sizes

• Bimetallic Overload Relays

• Adjustable trip current

• Direct heated bimetallic elements – class

10

• Ambient temperature compensated

• Phase-loss sensitivity protection

• Selectable Manual or Automatic RESET

• Electrically isolated NO-NC auxiliary

contacts

• NEMA 4X polymeric enclosure with

knockouts

Ground and Neutral (supplied as

standard)

Start/Stop contacts independent

from main contactor and from

thermal overload relay

Thermal overload relay reset

integrated to the stop button up to

25-30HP - 460V, 25HP - 575V

102

Industrial Control Products4.2

www.pamensky.com

PESW - Part Number Specifi cation

6

X --

5

A

2

S

4

V24

3

105

1

PESW

7

RM38

1. PESW Enclosed Starter, Non-Combination, Non-Reversing

2. Number of Phases: S = Single Phase

Blank = Three Phase

3. CWM (Contactor) Type:

Code Contactor Part Number Description

9 CWM9 - 10 - 30 Contactor 9 A, 1NO



25 CWM25 - 11 - 30 Contactor 25 A, 1NO/1NC



50 CWM50 - 11 - 30V Contactor 50 A, 1NO/1NC





4. Control Voltage: Code Coil Voltage Coil Part Number Description

V18 120 V BCA4 - 25V-18 AC coil contactor 9 -25 A

V24 208-240 V BCA4 - 25V-24 AC coil contactor 9 -25 A



V18 120 V BCA4 - 40V-18 AC coil contactor 32 - 40 A

V24 208-240 V BCA4 - 40V-24 AC coil contactor 32 - 40 A



V18 120 V BCA - 105V-18 AC coil contactor 50 - 105 A

V24 208-240 V BCA - 105V-24 AC coil contactor 50 - 105 A



5. Pilot Device: A = Start & Stop/Reset Pushbutton

E = Reset Pushbutton

6. Enclosure Type: X = NEMA 4X

7. Overload Ampere Range:

Single Phase Class 10 Three Phase Class 10

Code Part Number Description Code Part Number Description Code Part Number Description

RM26 RW27-1D2-U004 2.8 - 4A R23 RW27-1D3-D012 0.8 - 1.2A R36 RW67-2D3-U040 25 - 40A

RM27 RW27-1D2-D063 4 - 6.3A R24 RW27-1D3-D018 1.2 - 1.8A R37 RW67-1D3-U050 32 - 50A

RM28 RW27-1D2-U008 5.6 - 8A R25 RW27-1D3-D028 1.8 - 2.8A R38 RW67-2D3-U050 32 - 50A

RM29 RW27-1D2-U010 7 - 10A R26 RW27-1D3-U004 2.8 - 4.0A R39 RW67-2D3-U057 40 - 57A

RM30 RW27-1D2-D125 8 - 12.5A R27 RW27-1D3-D063 4.0 - 6.3A R40 RW67-2D3-U063 50 - 63A

RM31 RW27-1D2-U015 10 - 15A R28 RW27-1D3-U008 5.6 - 8.0A R41 RW67-2D3-U070 57 - 70A

RM32 RW27-1D2-U017 11 - 17A R29 RW27-1D3-U010 7.0 - 10A R42 RW67-2D3-U080 63 - 80A

RM33 RW27-1D2-U023 15 - 23A R30 RW27-1D3-D125 8.0 - 12.5A R43 RW117-1D3-U080 63 - 80A

RM34 RW27-1D2-U032 22 - 32A R31 RW27-1D3-U015 10 - 15A R44 RW117-1D3-U097 75 - 97A

RM35 RW67-1D2-U040 25 - 40A R32 RW27-1D3-U017 11 - 17A R45 RW117-1D3-U112 90 - 112A

RM36 RW67-2D2-U040 25 - 40A R33 RW27-1D3-U023 15 - 23A

RM37 RW67-1D2-U050 32 - 50A R34 RW27-1D3-U032 22 - 32A

RM38 RW67-2D2-U050 32 - 50A R35 RW67-1D3-U040 25 - 40A

102


www.pamensky.com

PESW - Table of Products115V - Single Phase


Overload

Range

(A)

Max.

Motor

(HP)

Coil

VoltageFrame

Degree of

Protection

Dimensions


7 - 10 0.5 120 V 04 NEMA 4X 7.3 x 4.1 x 4.4 PESWS-9V18AX-RM29 $123

10 - 15 0.75 120 V 04 NEMA 4X 7.3 x 4.1 x 4.4 PESWS-12V18AX-RM31 135

11 - 17 1 120 V 04 NEMA 4X 7.3 x 4.1 x 4.4 PESWS-18V18AX-RM32 141







Overload

Range

(A)

Max.

Motor

(HP)

Coil

VoltageFrame

Degree of

Protection

Dimensions


5.6 - 8 1 230 V 04 NEMA 4X 7.3 x 4.1 x 4.4 PESWS-9V24AX-RM28 $123

8 - 12.5 1.5 230 V 04 NEMA 4X 7.3 x 4.1 x 4.4 PESWS-9V24AX-RM30 123




25 - 40 7.5 230 V 08 NEMA 4X 11.0 x 7.1 x 5.6 PESWS-50V24AX-RM36 504




Overload

Range

(A)

Max.

Motor

(HP)

Coil

VoltageFrame

Degree of

Protection

Dimensions


1.8 - 2.8 0.75 230 V 04 NEMA 4X 7.3 x 4.1 x 4.4 PESW-9V24AX-R25 $139

2.8 - 4 1 230 V 04 NEMA 4X 7.3 x 4.1 x 4.4 PESW-9V24AX-R26 139

4 - 6.3 1.5 230 V 04 NEMA 4X 7.3 x 4.1 x 4.4 PESW-9V24AX-R27 139

5.6 - 8 2 230 V 04 NEMA 4X 7.3 x 4.1 x 4.4 PESW-9V24AX-R28 139

7 - 10 3 230 V 04 NEMA 4X 7.3 x 4.1 x 4.4 PESW-9V24AX-R29 139


15 - 23 7.5 230 V 04 NEMA 4X 7.3 x 4.1 x 4.4 PESW-25V24AX-R33 169

15 - 23 7.5 230 V 06 NEMA 4X 8.3 x 4.7 x 5.0 PESW-32V24AX-R33 226









102


www.pamensky.com

460V - Three Phase


Overload

Range

(A)

Max.

Motor

(HP)

Coil

VoltageFrame

Degree of

Protection

Dimensions


1.2 - 1.8 1 460V 04 NEMA 4X 7.3 x 4.1 x 4.4 PESW-9V47AX-R24 $139

1.8 - 2.8 1.5 460V 04 NEMA 4X 7.3 x 4.1 x 4.4 PESW-9V47AX-R25 139

2.8 - 4 2 460V 04 NEMA 4X 7.3 x 4.1 x 4.4 PESW-9V47AX-R26 139

4 - 6.3 3 460V 04 NEMA 4X 7.3 x 4.1 x 4.4 PESW-9V47AX-R27 139


8 - 12.5 7.5 460V 04 NEMA 4X 7.3 x 4.1 x 4.4 PESW-12V47AX-R30 145

11 - 17 10 460V 04 NEMA 4X 7.3 x 4.1 x 4.4 PESW-18V47AX-R32 161










575V - Three Phase


Overload

Range

(A)

Max.

Motor

(HP)

Coil

VoltageFrame

Degree of

Protection

Dimensions


1.2 - 1.8 1 575V 04 NEMA 4X 7.3 x 4.1 x 4.4 PESW-9V56AX-R24 $139

1.8 - 2.8 1.5 575V 04 NEMA 4X 7.3 x 4.1 x 4.4 PESW-9V56AX-R25 139



7 - 10 7.5 575V 04 NEMA 4X 7.3 x 4.1 x 4.4 PESW-9V56AX-R29 139










PESW - Table of Products

102


www.pamensky.com

PESW - Wiring Diagrams

Three phase D.O.L. Starter

Control circuit with phase to phase coil supply

Figure 1

Single-phase D.O.L Starter

Control circuit with separate coil supply

Figure 2

When using 24V, 48V, 110V, etc. on the

Part Number, WEG D.O.L. starters (DLW) will be factory-connected, as per

wiring diagrams of figure 2, that is, with control circuit to be connected

through a separate coil supply.

When using 230V, 400V, 500V, and 690V on the

Part Number, WEG D.O.L. starters (DLW) will

be factory-connected, as per wiring diagrams of figure 1, that is, with phase to

phase coil suplly.

For the voltages with phase to phase coil supply, contact WEG.

Note: When using remote control, disconnect the circuit at the points marked with the “x” in figures 1 and 2 and connect the external devices (Thermostat, pushbutton, etc),

as indicated with dotted lines.

Pilot Devices

102


www.pamensky.com

PESW - Dimensions

Dimensions in inches.

* For wall mounting on starters size 08 and 10, four screws with the following characteristics should be used: • Pan, dome or rounded shaped head;• Starter size 08:

• Screws size 1/4 (or M6 – ISO Standard);• Dimensions: diameter thread shall be maximum 1/4 in. and diameter head shall be maximum 15/64 in.

• Starter size 10: • Screws size 12 (or M5 – ISO Standard);

• Dimensions: diameter thread shall be maximum 0.236 in. and diameter head shall be maximum 0.394 in.

Frame øA B C D E

Provision for cable gland fi tting

Top Bottom Back

Size 04 0.2 7.1 4.4 4.1 7.3 2 x 1/2” 2 x 1/2” ø0.7

Size 06 0.3 8.1 5.0 4.7 8.3 2 x 1/2” and 3/4” 2 x 1/2” and 3/4” ø0.9

Size 08 0.2 10.8 5.6 7.1 11.0 2 x 3/4” and 1” 2 x 3/4” and 1” N/A *

Size 10 0.3 14.0 6.6 9.9 14.2 1 x 1” and 1 1/4” 1 x 1” and 1 1/4” N/A *

102


www.pamensky.com

Other Starter Options

ESW Series NEMA 1 Non-Combination Starters

• High horsepower ratings in three compact sizes

• NEMA type 1 metallic lift-off enclosure with

knockouts

• Bimetallic ambient compensated overload relays

• Easy addition of pilot devices for fi eld modifi cation

• Manual RESET plunger is provided as standard

feature on all models

Customized Starter Solution

V.J. Pamensky Canada Inc. has a Toronto based panel

shop to design and build custom solutions for motor

control applications. Customized NEMA 4 starters

with Emergency Stop, Start-Stop and control options

can be built quickly and to fi t the demands of different

applications.

Explosion Proof Manual Motor Starters

• Suitable for Hazardous Areas: Class I, Groups C &

D - Class II, Groups E, F, G

• Motor Control

• Circuit Disconnect

• Short Circuit Protection up to 10 kA @ 600 VAC

• Thermal Overload Protection Class 10

• Control Devices: Start & Stop / Reset

102


www.pamensky.com

CWC Miniature ContactorsThe CWC Series miniature contactor features more horsepower for its size than any other

miniature contactor on the market. The CWC’s compact dimensions for its current rating, up

to 25A, AC-3 utilization category, allows it to take up less space inside electrical enclosures

while still running motors up to 10HP @ 575V. The dimensions remain the same whether the

coil voltage is AC or DC making panel design and assembly easier. DC models feature low

consumption coils allowing the CWC to be operated directly from a PLC without interface

relays.

The following confi gurations are available “off-the-shelf.”

• 3 Pole Normally Open Power Contacts

with one built-in Auxiliary Contact (Can be

Normally Open or Normally Closed)

• 3 Pole Normally Open Reversing Contactors rated AC-4 Utilization Category

• 4 Pole Power Contacts (four Normally Open, or two Normally Open and two Normally

Closed)

• Control Relay

An extensive lineup of modular and tool-free accessories makes the CWC Series the most

fl exible and easy-to-use miniature contactor available today.

Features

• Rated up to 10 HP @ 575V

• Direct mounting to the WEG RW17D

overload relay and MPW25 manual motor

protector with ECCMP-C0 accessory

• Frame size remains the same for AC and

DC coil contactors

• Heavy-duty operation

• Tool-free DIN rail mounting

• Complete line of snap-on accessories

102


www.pamensky.com

CWC - Part Number Specifi cation-

5

V18

2

16

4

30

3

10

1

CWC

1. CWC Miniature Contactor

2. Frame Rating: Blank: Control Relay (Ith = 10Amps)

07: 7Amps

09: 9Amps

12: 12Amps

16: 16Amps

25: 25Amps

3. Auxiliary Contacts: 00: None

10: 1 NO

01: 1 NC

4. Power Pole: 00: Control Relay (4 auxiliary terminals)

30: CWC0 with 3 NO Power Poles

22: CWC0 with 2 NO + 2 NC Power Poles

40: CWC0 with 4 NO Power Poles

5. Coil Voltage: VAC Coil VDC Coil (Standard Consumption) VDC Coil (Low Consumption)

Description Code Description Code Description Code

24Vac 60Hz V04 24Vdc C03 24Vdc L03

120Vac 60Hz V18 110Vdc C12

208-240Vac 60Hz V24

480Vac 60Hz V47

600Vac 60Hz V56

102


www.pamensky.com

CWC Miniature Contactors - Table of Products

Replace ‘X’ with code for AC Coil Voltage Code Selection

60 Hz 120V 208-240V

CODE V18 V24

50 Hz 110V -

Replace ‘X’ with code for AC Coil Voltage Code Selection

60 Hz 120V 208-240V 480V 600V

CODE V18 V24 V47 V56

50 Hz 110V - 400-415V -

Three Pole Miniature Contactors with AC Coil


Current

(A)

Maximum Applicable Motor (HP)Auxiliary Contacts Weight

(lb)Part Number List PriceSingle Phase Three Phase

115V 230V 200V 230V 460V 575V NO NC

7 1/3 3/4 1 1/2 1 1/2 5 5 1 0 0.43 CWC07-10-30* $29

7 1/3 3/4 1 1/2 1 1/2 5 5 0 1 0.43 CWC07-01-30* 29

9 1/3 1 2 3 5 7 1/2 1 0 0.43 CWC09-10-30* 31

9 1/3 1 2 3 5 7 1/2 0 1 0.43 CWC09-01-30* 31

12 1/2 2 3 3 7 1/2 7 1/2 1 0 0.43 CWC12-10-30* 32

12 1/2 2 3 3 7 1/2 7 1/2 0 1 0.43 CWC12-01-30* 32

16 1 2 3 5 10 10 1 0 0.43 CWC16-10-30* 33

16 1 2 3 5 10 10 0 1 0.43 CWC16-01-30* 33

25 1 1/2 3 5 7 1/2 15 15 0 0 0.44 CWC25-00-30* 42

Miniature Control Relay with AC Coils

Electrical Data Purchasing Data

Current

(A)Rating

Auxiliary ContactsPart Number List Price

N.O. N.C.

10 A600, Q600 2 2 CAW04R422X $30

10 A600, Q600 3 1 CAW04R431X 30

10 A600, Q600 1 3 CAW04R413X 30

10 A600, Q600 4 0 CAW04R440X 30

10 A600, Q600 0 4 CAW04R404X 30

102


www.pamensky.com

CWC Miniature Contactors - Technical DataPart number CWC07 CWC09 CWC012 CWC016 CWC025 CWCA0

Standards IEC/EN 60 947. DIN VDE 0660. UL. CSA

Rated insulation voltage Ui

IEC/EN 60 947. DIN VDE 0660 690 V

600 VUL. CSA

Rated impuse withstand voltage Uimp

4kV

Rated operational frequency 25 - 400 Hz

Degree of protection

Main circuits IP20

IP20Control circuits and auxiliary contacts

Ambient temperature

Operating temperature

Storage temperature-25oC to +55oC

-55oC to +80oC

Altitude

Normal values

90 % Ie / 80 % U

e

80 % Ie / 75 % U

e

to 3000 m

3000 to 4000 m

4000 to 5000 m

Overvoltage category / Pollution degree III / 3

Climatic proofi ng IEC 60 680-2

Pole number of main circuits 3 4

Rated operational voltage Ue

690V 690 V

Conv. thermal current Ith

at < 55oC rated operational current Ie / AC-1

18 A 20 A 22 A 22 A 32 A 10 A

Rated operational current Ie AC-4 (U

e ≤ 440V) 2.8 3.5 4.5 5 9 -

AC-3 Utilization Category

Rated operational power

220/230 V kW / hp

380 V kW / hp

400/415 V kW / hp

440 V kW / hp

500 V kW / hp

690 V kW / hp

1.5 / 2

3 / 4

3 / 4

3.7 / 5

3.7 / 5

3.7 / 5

2.2 / 3

4 / 5

4.5 / 6

4.5 / 6

4.5 / 6

5.5 / 7.5

3 / 4

5.5 / 7.5

5.5 / 7.5

5.5 / 7.5

5.5 / 7.5

7.5 / 10

4 / 5

7.5 / 10

7.5 / 10

7.5 / 10

7.5 / 10

7.5 / 10

5.5 / 7.5

11 / 15

11 / 15

11 / 15

11 / 15

11 / 15

-

-

-

-

-

-

Maximum numbers of auxiliary contacts 5 2 4

Short circuit rating max. fuse gL-gG (A) 20 20 25 25 35 10

Maximum electrical operations per hour

AC-1 Ops/h

AC-3 Ops/h

AC-4 Ops/h

no load Ops/h

300

600

300

2500

-

-

-

2500

Mechanical lifespan Ops x 106 10 3 10

Electrical lifespan (AC-3) Ops x 106 1.4 1.3 1.2 1.1 0.6 -

Rated operational current Ie

AC-15

220-230 V A - - - - - 10

380-400 V A - - - - - 6

415 V A - - - - - 5

500 V A - - - - - 4

DC-13

24 V A - - - - - 6

48 V A - - - - - 4

110 V A - - - - - 2

220 V A - - - - - 0.7

Control circuit reliability -U

e min=17 V

Ie min= 5 mA

Terminal capacity

1 or 2 x (0.5...2.5)1 or 2 x (1...2.5)

1 or 2 x (2.5...6.0)1 or 2 x (0.5...2.5)

Tightening torque N.m 1...1.5 1.8 1...1.5

102


www.pamensky.com

CWC Miniature Contactors - Technical Data

Control circuit

Part number CWC07 CWC09 CWC012 CWC016 CWC025 CWCA0

Coil consumption AC

Pick-up VA 30 58 30

Cos j 0.8 0.8 0.8

Sealing VA 2...3 4.5...5.8 2...3

Cos j 0.27 0.27 0.27

Operation time Closing / Opening (AC) ms 8...20 / 6...13 13...16 / 13.5...17 8...20 / 6...13

Coils rated voltage V 12-660VAC / 12-440VDC 12-660VAC 12-660VAC / 12-440VDC

Coil operational limits 0.85...1.1

Bifrequency coilsPick-up xUs 0.5...0.8

Drop-out xUs 0.2...0.6

Timing Relay

Rated insulation voltage (Ui ) V 300

Supply voltage (Ue )

1 – 2

terminals

24...240 VDC/VAC 50/60 Hz (TEC0)

24...60 VDC/VAC 50/60 Hz (TDC0)

100...240 VDC/VAC 50/60 Hz (TDC0)

220-240 VAC 50/60Hz (TETC0)

110-130 VAC 50/60Hz (TETC0)

24-28 VAC 50/60Hz (TETC0)

Control Voltage (Uc )

only TDC0 - pg 18

2 – B1

terminals

24...60 VDC/VAC 50/60 Hz (TDC0)

100...240 VDC/VAC 50/60 Hz (TDC0)

Voltage operational limits0.85...1.1 x Uc (VAC)

0.8...1.25 x Uc (VDC)

Consumption mA ≤ 5

Minimum time for Reset (Recovery time) ms 650

Minimum control time (only TDC0) ms 50

Setting accuracy (% of the full scale value) % +/-5

Repeat Accuracy % +/-1

Changeover time Y - Δ ms 50

Auxiliary contact block BFC

Terminal capacity

Number of conductors and Cross section

(min. and max.)

Flexible without cable lug (mm2) 2x (0.5...2.5)

Flexible without cable lug (mm2) 2x (0.75...1.5)

AWG Cables (12...22)

Tightening torque Nm 08...1.5Nm

Conventional thermal current (lth) A 10

Rated operational current (Ie) AC - 15

A6/4(220/240V). 3/2(380/440V). 2(500V)

Rated operational current (Ie) DC - 13 1.5(24V). 0.5(60V). 0.2(220-240V)

102


www.pamensky.com

CWM Standard ContactorsThe CWM general-purpose contactor line has been designed to take into consideration

industrial duty and reliability.

Rated for inductive loads up to 800A or 440kW @380/400V, WEG can offer the suitable

contactor for your application.

CWM contactors allow total panel space optimization, with only a few compact frame

sizes from 4 to 440kW @ 400/415V. Reducing inventory is a “snap” with CWM’s common

accessories. For example, side-mounted auxiliary contact blocks are the same from 9 to

300A (AC-3) @ 440V.

Designed for extended mechanical and electrical life, dependable switching in even the most

heavy-duty applications can be achieved. No matter how demanding the application, all

WEG contactors are tested and approved to be used under Type 1 and Type 2 short circuit

coordination. Ensuring global acceptance, all components conform to UL508 (USA and

Canada), IEC60947 and CE.

Features

• General purpose motor applications

• Fractional power through 600HP @ 460V

• Compact frame sizes

• Panel mountable or 35mm DIN rail up to

75HP @ 460V

• Built-in auxiliary contacts up to 10HP @

460V

• Front and side mountable auxiliary contact

blocks

• IP20 Finger-touch protection

• Wide coil voltage selection AC or DC

• AC/DC coils with electronic modules

available from 100HP and up

• Replaceable main contacts for entire line

102


www.pamensky.com

CWM - Part Number Specifi cation-

5

V18

2

18

4

30

3

10

1

CWM

1. CWM Contactor CWM: Contactor up to 300ACWME: Contactor 400A and above

2. Frame Rating: 9: 9Amps

12: 12Amps

18: 18Amps

25: 25Amps

32: 32Amps

40: 40Amps

50: 50Amps

65: 65Amps

80: 80Amps

95: 95Amps

105: 105Amps

112: 112Amps

150: 150Amps

180: 180Amps

250: 250Amps

300: 300Amps

400: 400Amps

600: 630Amps

800: 800Amps

3. Auxiliary Contacts: 00: None

10: 1 NO

01: 1 NC

11: 1 NO + 1 NC

22: 2 NO + 2 NC

4. Power Pole: 30: 3 NO Power Poles

20: 2 NO Power Poles

5. Coil Voltage: VAC Coil (CWM9 to CWM105) VDC Coil (CWM9 to CWM105) VAC / VDC Coil (CWM112 to CWME800)


24Vac 60Hz V04 24Vdc (CWM9…CWM25) C03 24-28Vac/Vdc (CWM112…CWM300) E02

120Vac 60Hz V18 24-28Vdc (CWM32…CWM105) C34 110-130Vac/Vdc (CWM112…CWM300) E10

208-240Vac 60Hz V24 110Vdc (CWM9…CWM25) C12 208-250Vac/Vdc (CWM112…CWM300) E13

480Vac 60Hz V47 110-130Vdc (CWM32…CWM105) C40 430-500Vac/Vdc (CWM112…CWM300) E42

600Vac 60Hz V56 100-127Vac/Vdc (CWME630…CWME800) E35

100-240Vac/Vdc (CWME400) E36

200-240Vac/Vdc (CWME630…CWME800) E39

440-575Vac (CWME400…CWME800) D82

102


www.pamensky.com

CWM Standard Contactors - Table of ProductsThree Pole Contactors with AC Coil


Current

(A)

Maximum Applicable Motor (HP)Auxiliary Contacts Weight

(lb)Part Number List PriceSingle Phase Three Phase

115V 230V 200V 230V 460V 575V NO NC

9 1/2 1.5 3 3 5 7 1/2 1 0 0.65 CWM9-10-30* $42

9 1/2 1.5 3 3 5 7 1/2 0 1 0.65 CWM9-01-30* 42

12 3/4 2 3 3 7 1/2 10 1 0 0.65 CWM12-10-30* 55

12 3/4 2 3 3 7 1/2 10 0 1 0.65 CWM12-01-30* 55

18 1 3 5 5 10 15 1 0 0.65 CWM18-10-30* 60

18 1 3 5 5 10 15 0 1 0.65 CWM18-01-30* 60

25 2 5 7 1/2 7 1/2 15 15 0 0 0.65 CWM25-00-30* 71

25 2 5 7 1/2 7 1/2 15 15 1 1 0.65 CWM25-11-30* 71

32 3 5 10 10 20 25 0 0 1.15 CWM32-00-30* 101

32 3 5 10 10 20 25 1 1 1.15 CWM32-11-30* 101

40 3 7.5 10 15 30 25 0 0 1.19 CWM40-00-30* 143

40 3 7.5 10 15 30 25 1 1 1.19 CWM40-11-30* 143

50 3 10 15 15 40 40 0 0 2.44 CWM50-00-30* 163

50 3 10 15 15 40 40 1 1 2.44 CWM50-11-30* 163

65 5 10 20 20 50 50 0 0 2.47 CWM65-00-30* 182

65 5 10 20 20 50 50 1 1 2.47 CWM65-11-30* 182

80 7 1/2 15 20 25 50 60 0 0 2.49 CWM80-00-30* 233

80 7 1/2 15 20 25 50 60 1 1 2.49 CWM80-11-30* 233

95 7 1/2 15 25 30 60 75 0 0 3.20 CWM95-00-30* 284

95 7 1/2 15 25 30 60 75 1 1 3.20 CWM95-11-30* 284

105 10 20 30 40 75 75 0 0 3.24 CWM105-00-30* 331

105 10 20 30 40 75 75 1 1 3.24 CWM105-11-30* 331

150 - - 50 60 125 150 2 2 5.60 CWM150L322X 658

180 - - 60 75 150 200 2 2 8.91 CWM180L322X 909

250 - - 75 100 200 250 2 2 13.54 CWM250L322X 1,321

300 - - 100 125 250 350 2 2 13.54 CWM300L322X 1,514

400 - - 125 150 300 300 2 2 call CWME400L322X 2,082

630 - - 150 200 400 400 2 2 call CWME630L322X 3,158

800 - - 200 300 600 600 2 2 call CWME800L322X 4,620

Replace ‘X’ with code for AC Coil Voltage Code Selection for Contactors CWM9 to CWM105

60 Hz 24V 48V 120V 208-240V 480V 600V

CODE V04 V10 V18 V24 V47 V56

50 Hz - 42V 110V - 400-415V 500V

Replace ‘X’ with AC/DC Coil voltage code selection for Contactors CWM150, 180, 250, 300

Voltage 110-130Vac/Vdc 208-250Vac/Vdc

CODE E10 E13

Mounting on CWM112-300 CWM112-300

Replace ‘X’ with AC/DC Coil voltage code selection for Contactors CWM400, 630, 800

Voltage 100-240Vac/100-220Vdc 100-127Vac/100-110Vdc 200-240Vac/200-220Vdc 440-575Vac

CODE E36 E35 E39 D82

Mounting on CWME400 CWME630-800 CWME630-800 CWME400-800

102


www.pamensky.com

CWM Standard Contactors - Accessories

Maximum # of added auxiliary contacts per contactor frame size: Note that side mountable version has 2 aux. contacts per block.CWM9…25 = 4 aux. contacts; CWM32…40 = 6 aux. contacts; CWM50…300E = 8 aux. contacts.

Auxiliary contact blocks for CWM9 to CWME800

• Terminal markings to EN 50 005 and EN 50 012

• Positive driven contacts in accordance with IEC/EN 60947-4-1 resp. IEC/EN60947-5-1

Description For ContactorAuxiliary

Part Number List PriceNO NC

Front Mounting CWM9…105 1 0 BCXMF10 $5

Front Mounting CWM9…105 0 1 BCXMF01 5

Side Mounting CWM9…300 1 1 BCXML11 15

Side Mounting CWM9…300 2 0 BCXML20 15

Side Mounting CWM400…CWM800 1 1 BCXML11 CWME800 44

Side Mounting, Second Block CWM400…CWM800 1 1 BCXMRL11 CWME800 44

For CWM9…CWM105 the mechanical interlock can be used to interlock different frame sizes. For CWM112…CWM300, the mechanical interlock has to be used with contactors that have the same mechanical frame size.For BLIM CWME800, a metal mount base is provided with this accessory for an accurate assembling of the contactors.

Mechanical Interlock

Description For ContactorAuxiliary

Part Number List PriceNO NC

Side mounted between two contactors CWM9…105 0 0 BLIM 9-105 $30

Side mounted between two contactors CWM112…CWM300 0 0 BLIM 112-300 54

Side mounted between two contactors CWM400 0 0 BLIM CWME400 44

Bottom mounted between two contactors CWM630…CWM800 0 0 BLIM CWME800 1424

Surge Suppressors

Description For Contactor Voltage Range Part Number List Price

Limits switching transients from contactor pick-up CWM9...40 130...250V CWMBAMRC6 $23

Limits switching transients from contactor pick-up CWM50...105 130...250V CWMBAMRC9 23

102


www.pamensky.com

CWM Standard Contactors - AccessoriesIndividual spare coils


AC Coil CWM9....25. CWMC25 CWMBCA425X $10

AC Coil CWM32...40. CWMC32 CWMBCA440X 16

AC Coil CWM50...105. CWMC50...65 CWMBCA105X 22

AC Coil CWM112 CWMBCA112X 24



Dual-Voltage Coils AC/DC (contactors with electronic module) CWM112...150 CWMBCE-150X 28

Dual-Voltage Coils AC/DC (contactors with electronic module) CWM180 CWMBCE-180X 44

Dual-Voltage Coils AC/DC (contactors with electronic module) CWM250...300 CWMBCE-300X 74

Dual-Voltage Coils AC/DC (contactors with electronic module) CWME400 CWMEBCE-400X 492

Dual-Voltage Coils AC/DC (contactors with electronic module) CWME630...800 CWMEBCE-800X 600

Replace ‘X’ with AC/DC Coil voltage code selection for Contactors CWM150, 180, 250, 300

Voltage 110-130Vac/Vdc 208-250Vac/Vdc

CODE E10 E13

Mounting on CWM112-300 CWM112-300

Replace ‘X’ with AC/DC Coil voltage code selection for Contactors CWM400, 630, 800

Voltage 100-240Vac/100-220Vdc 100-127Vac/100-110Vdc 200-240Vac/200-220Vdc 440-575Vac

CODE E36 E35 E39 D82

Mounting on CWME400 CWME630-800 CWME630-800 CWME400-800

Replace ‘X’ with code for AC Coil Voltage Code Selection for Contactors CWM9 to CWM105

60 Hz 24V 48V 120V 208-240V 480V 600V

CODE V04 V10 V18 V24 V47 V56

50 Hz - 42V 110V - 400-415V 500V

102


www.pamensky.com

CWM Standard Contactors - Technical DataGeneral Ratings - CWM9 to CWM105

Type CWM9 CWM12 CWM18 CWM25 CWM32 CWM40 CWM50 CWM65 CWM80 CWM95 CWM105

StandardsDevices according to International Standards IEC 60947-1 / 60947-4-1, European Standards EN 60947-1 / 60947-4-1,

Underwriters Laboratories - UL 508; CSA C.22.2/14; VDE 0660/102

Rated Insulation Volt-

age Ui

Acc. IEC; VDE 0660

Acc. UL; CSA

[V]

[V]

1000

600

Rated Impulse Voltage

Uimp

Acc. IEC60947-1[kV] 6 8

Rated Operating

Frequency[Hz] 25…400

Degree of Protection

Main terminals

Coil terminals

Auxiliary terminals

Protection against direct contact Acc. VDE 0160 - Part. 100

IP20 IP10

IP20

IP20

Ambient Temperature

Storage

Operating

-55 to +80oC (-67 to +176oF)

-25 to +55oC (-13 to +131oF)

Altitude

Up to 1,500m

Other altitudes

Nominal values

See graphic on page 94

Pollution Degree 3

Climatic Withstand According to IEC 68-2

Mounting 35mm rail Acc. DIN EN 50 022

Vibration Resistance

(5 to 200 Hz)

Contactor open

Contactor closed at Uc

[g]

[g]

3

6

3

6

3

6

7.5

8

8

12

8

12

4.5

9

4.5

9

4.5

9

5

7

5

7

Mechanical Endurance

AC CoilMillion

ops.10

Electrical Endurance

AC-3

Million

ops.1.8 1.6 1.2 1.3 1.2 1.2 1.1 1.3 1.1 1.1 1

Shock Resistance

(1/2 sin wave = 11ms)

Contactor open


[g]

[g]

8

12

8

12

8

12

8

12

7

12

7

12

6

10

6

10

6

10

6

10

6

10

Weight

AC Coil

[kg]

[lb]

0.30

0.65

0.30

0.65

0.30

0.65

0.30

0.65

0.52

1.15

0.54

1.19

1.11

2.44

1.12

2.47

1.13

2.49

1.45

3.20

1.47

3.24

Terminal Capacity Cross / Slotted Combination Allen Head

Fine - Stranded with

sleeve

Top

[mm2]2x0.5-2.5 2x0.5-2.5 2x0.5-2.5 2x1-2.5 0.75-16 0.75-16 1-35 1-35 1-35 1.5-50 1.5-50

Bot-

tom

[mm2]

or 2x2.5-6 or 2x2.5-6 or 2x2.5-6 or 2x2.5-10 1.0-16 1.0-16 2.5-35 2.5-35 2.5-35 4-35 4-35

Coarse - Stranded /

Solid

Top

[mm2]2x1-2.5 2x1-2.5 2x1-2.5 2x1-2.5 1-16 1-16 1.5-35 1.5-35 1.5-35 2.5-50 2.5-50

Bot-

tom

[mm2]

or 2x2.5-6 or 2x2.5-6 or 2x2.5-6 or 2x2.5-10 1.5-16 1.5-16 6-35 6-35 6-35 6-35 6-35

Stranded / Solid (UL

/ CSA)

Top

[AWG]2x20-12 2x20-12 2x20-12 2x18-12 18-6 18-6 16-2 16-2 16-2 16-1 16-1

Bot-

tom

[AWG]

or 2x12-10 or 2x12-10 or 2x12-10 or 2x12-8 16-6 16-6 14-2 14-2 14-2 10-2 10-2

Drive Size Philips #2 5/32” (4mm.)

Tightening Torquelb-in

(Nm)

8.9...15

(1...1.7)

8.9...15

(1...1.7)

8.9...15

(1...1.7)

14.2...26.6

(1.6...3)

22.1...35..4

(2.5...4)

22.1...35..4

(2.5...4)

35.4...53.1

(4...6)

35.4...53.1

(4...6)

35.4...53.1

(4...6)

44.3...57.5

(5...6.5)

44.3...57.5

(5...6.5)

Operating Position see next page

102


www.pamensky.com

CWM Standard Contactors - Technical Data

General Ratings - CWM112 to CWME800

Type CWM112 CWM150 CWM180 CWM250 CWM300 CWME400 CWME630 CWME800

StandardsDevices according to International Standards IEC 60947-1 / 60947-4-1, European Standards EN 60947-1 / 60947-4-1,

Underwriters Laboratories - UL 508; CSA C.22.2/14; VDE 0660/102

Rated Insulation Volt-

age Ui

Acc. IEC; VDE 0660

Acc. UL; CSA

[V]

[V]

1000

600


Uimp

Acc. IEC60947-1

Rated Operating

Frequency

[kV]

[Hz]

8

25…400

Degree of protection

Main terminals

Coil terminals

Auxiliary terminals

Protection against direct contact acc. VDE 0160 - Part. 100

IP00

IP20

IP20

Ambient Temperature

Storage

Operating

-55 to +80oC (-67 to +176oF)

-25 to +55oC (-13 to +131oF)

Altitude

Up to 1,500m

Other altitudes

Nominal values

See graphic on page __ up to 2000m

Pollution Degree 3

Climatic withstand According to IEC 68-2

Mounting Screw to panel

Vibration Resistance

(5 to 200 Hz)

Contactor open


[g]

[g]

4

4

Mechanical Endurance

AC CoilMillion

ops.10 5

Electrical Endurance

AC-3

Million

ops.1.1 1.1 1.0 1.0 1.0 0.5

Shock Resistance

(1/2 sin wave = 11ms)

Contactor open


[g]

[g]

3

3

Weight

AC/DC Coil - CWM_E

Series only

[kg]

[lb]

2.54

5.60

2.54

5.60

4.04

8.91

6.14

13.54

6.14

13.54

-

-

-

-

-

-

Terminal Capacity

Fine - Stranded with

sleeve [mm2] 2 x (25-70) 2 x (25-70) 2 x (50-120) 2 x (50-150) 2 x (50-150) 1 x 150 1 x 240 1 x 240

AWG wires with end

sleeve

1 x 300

or 2 x 107

1 x 300

or 2 x 107

1 x 300

or 2 x 107

1 x 500

or 2 x 300

1 x 500

or 2 x 300Nº2 30×5 Nº2 50×5 Nº2 60×5

Busbars [mm] 2 x (15 x 3) 2 x (15 x 3) 2 x (20 x 3) 2 x (30 x 5) 2 x (30 x 5) - - -

Tightening Torquelb-in

(Nm)

47.8-53.1

(5.4-6)

47.8-53.1

(5.4-6)

123.9-141.6

(14-16)

203.6-230.1

(23-26)

203.6-230.1

(23-26)

203.6

(23)

504.5

(57)

504.5

(57)

Operating Position see below

Operating Position

CWM9 to CWM105 CWM112 to CWM800

102


www.pamensky.com

Power Contacts - CWM9 to CWM105


Standard UL/CSA Ratings

Rated Operating Voltage [V] 600

General Purpose Rating [A] 25 25 32 32 60 60 90 110 110 140 140

Switching Motor Loads

Full Voltage - 60Hz

1-phase 115V [A] 9.8 13.8 16 24 34 34 56 56 80 80 100

230V [A] 10 12 17 28 28 28 40 50 68 68 88

115V [HP] 1/2 3/4 1 2 3 3 5 5 7-1/2 7-1/2 10

230V [HP] 1-1/2 2 3 5 5 5 7-1/2 10 15 15 20

3-phase 200V [A] 11 11 17.5 25 32.2 32.2 48.3 62.1 62.1 78.2 92

230V [A] 9.6 9.6 15.2 22 28 42 42 54 68 80 104

460V [A] 7.6 11 14 21 27 40 52 65 65 77 96

575V [A] 9 11 17 17 27 27 41 52 62 77 77

200V [HP] 3 3 5 7-1/2 10 10 15 20 20 25 30

230V [HP] 3 3 5 7-1/2 10 15 15 20 25 30 40

460V [HP] 5 7-1/2 10 15 20 30 40 50 50 60 75

575V [HP] 7-1/2 10 15 15 25 25 40 50 60 75 75

Standard IEC Ratings

Rated Operating Voltage [V] 690 1000

Rated Thermal Current Ith [A] 25 25 32 45 60 60 90 110 110 140 140


AC-2; AC-3; AC-4 - 50Hz

3-phase 220-240V [A] 9 12 18 25 32 40 50 65 80 95 105

380-400V [A] 9 12 18 25 32 40 50 65 80 95 105

415-440V [A] 9 12 18 25 32 40 50 65 80 95 105

500V [A] 7.5 10.5 14 19 24 32 38 55 63 79 85

660-690V [A] 7 9 13 15 22 25 34 44 48 60 80

220-240V [kW] 2.2 3 4 7.5 9 11 15 18.5 22 25 30

380-400V [kW] 4 5.5 7.5 11 15 18.5 22 30 37 45 55

415-440V [kW] 4 5.5 7.5 11 15 22 25 37 45 50 55

500V [kW] 5.5 7.5 10 15 18.5 25 30 40 45 55 65

660-690V [kW] 5.5 7.5 10 15 18.5 30 35 45 45 55 65

Maximum Switching Rate

AC-4

AC-1 [ops/hr] 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200

AC-3 [ops/hr] 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 600 600

no load [ops/hr] 9,000 9,000 9,000 9,000 9,000 9,000 5,000 5,000 5,000 5,000 5,000

200,000 operations <= 690V [A] 5 7 8 12 16 18.5 23 30 37 44 50

50/60Hz 220-230V [kW] 1.1 1.5 1.5 3 4 4.5 5.5 7.5 9.2 11 12.5

[HP] 1.5 2 2 4 5.4 6 7.5 10 12.5 15 17

380-400V [kW] 2.2 3 3.7 5.5 7.5 9.2 11 15 18.5 22 22

[HP] 3 4 5 7.5 10 12.5 15 20 25 30 30

415-440V [kW] 2.2 3.7 4.5 5.5 9.2 11 11 15 22 22 30

[HP] 3 5 6 7.5 12.5 15 15 20 30 30 40

500V [kW] 3 4 5.5 7.5 10 11 15 18.5 22 25 30

[HP] 4 5.4 7.5 10 13 15 20 25 30 33 40

660-690V [kW] 3 4.5 5.5 7.5 11 12.5 15 20 25 30 33

[HP] 4 6 7.5 10 15 17 20 27 33 40 45

Maximum Switching Rate [ops/hr] 360 360 360 360 360 200 200 200 200 200 200

Making Capacity [A] 450 450 450 450 550 1000 1000 1000 1000 1280 1280

Breaking Capacity Ue=400V

Ue<=400V[A] 250 250 250 450 450 920 920 920 920 1050 1050

Ue=500V [A] 250 250 250 320 450 920 920 920 920 1050 1050

Ue=690V [A] 130 130 130 170 205 780 780 780 780 950 950

Impedance per Pole [mW] 2.41 2.41 2.35 1.65 1.28 0.95 0.85 0.86 0.86 0.76 0.76

Power Dissipation per Pole

AC-1 [W] 1.47 1.47 2.46 3.34 4.6 3.42 6.86 10.4 10.4 14.89 14.89

AC-3 [W] 0.19 0.34 0.78 1.03 1.31 1.52 2.12 3.63 5.5 6.86 8.37

Short Time Current Icw

1 sec. [A] 455 455 570 630 1010 1265 1580 2530 2530 3300 3300

5 sec. [A] 205 205 254 280 450 450 710 1130 1130 1485 1485

10 sec. [A] 144 144 180 200 320 400 500 800 800 1050 1050

30 sec. [A] 85 85 104 115 185 230 290 460 460 600 600

1 min. [A] 60 60 74 80 130 165 205 325 325 430 430

3 min. [A] 35 35 46 50 90 100 120 185 185 250 250

Rec. time [min.] 10 10 10 10 10 10 10 10 10 10 10

Short Circuit Coordination

Coordination Type “1” gL/gG [A] 50 50 63 63 100 125 200 200 200 250 250

Coordination Type “2” gL/gG [A] 25 35 35 50 63 80 100 125 125 160 200


102


www.pamensky.com

CWM Standard Contactors - Technical DataPower Contact - CWM112 to CWME800


UL/CSA Applications


General Purpose Rating [A] 170 170 200 300 400 450 660 900


Full Voltage - 60Hz

1-phase 115V [A] - - - - - - - -

230V [A] - - - - - - - -

115V [HP] - - - - - - - -

230V [HP] - - - - - - - -

3-phase 200V [A] 120 150 177 221 285 359 414 552

230V [A] 130 154 192 248 312 360 480 772

460V [A] 124 156 180 240 302 361 477 -

575V [A] 99 144 192 242 336 289 382 -

200V [HP] 40 50 60 75 100 125 150 200

230V [HP] 50 60 75 100 125 150 200 300

460V [HP] 100 125 150 200 250 300 400 600

575V [HP] 100 150 200 250 350 300 400 600

Standard IEC Ratings


Rated Thermal Current Ith [A] 180 225 225 350 350 450 660 900


AC-3 - 60Hz

3-phase 220-240V [A] 112 150 180 250 300 400 630 800

380-400V [A] 112 150 180 250 300 400 630 800

415-440V [A] 112 150 180 250 300 400 630 800

500V [A] 95 130 155 220 265 350 500 720

660-690V [A] 82 110 135 185 220 300 420 630

220-240V [kW] 30 45 55 75 90 110 185 220

380-400V [kW] 55 75 90 132 160 220 330 450

415-440V [kW] 55 90 110 150 185 220 370 500

500V [kW] 55 90 110 160 200 220 330 500

660-690V [kW] 75 110 110 160 200 260 400 560

Maximum Switching

Rate AC-1 [ops/hr] 600 600 600 600 600 500 500 500

AC-3 [ops/hr] 600 600 600 600 600 500 500 500

no load [ops/hr] 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000

AC-4

200,000 operations <= 690V [A] 50 55 58 100 130 - - -

50/60Hz220-230V

[kW] 18.5 20 22 37 45 90 110 185

[HP] 25 27 30 50 60 125 150 250

380-400V[kW] 30 33 37 55 75 150 220 330

[HP] 40 44 50 75 100 200 300 450

415-440V[kW] 37 40 45 63 80 185 220 370

[HP] 50 54 60 84 107 250 300 500

500V[kW] 40 45 50 75 90 - - -

[HP] 54 60 67 100 121 - - -

660-690V[kW] 45 50 55 90 100 - - -

[HP] 600 67 75 121 133 - - -

Maximum Switching

Rate[ops/hr] 150 150 150 150 150 - - -

Making Capacity [A] 1430 1820 2100 2600 3000

Breaking Capacity

Ue<=400V [A] 1290 1350 1400 2000 - 4000 6300 8000

Ue=500V [A] 1290 1350 1400 2000 - 4000 6300 8000

Impedance per pole [mW] 0.5 0.5 0.45 0.3 0.3 - - -

Power Dissipation per Pole

AC-1 [W] 16 25 21.6 35 45.7 - - -

AC-3 [W] 6.2 11.1 13.8 17.9 25.7 - - -

Short Time Current Icw

1 sec. [A] 3165 3763 4649 4427 - - - -

5 sec. [A] 1820 2164 2673 2546 - - - -

10 sec. [A] 1430 1700 2100 2000 - - - -

30 sec. [A] 826 980 1212 1155 - - - -

1 min. [A] 584 694 857 816 - - - -

3 min. [A] 337 401 495 471 - - - -

Recovery time [min.] 10 10 10 10 10 - - -

Short Circuit Coordination

Coordination type “1” gL/gG [A] 315 355 355 500 630 630 800 1000

Coordination type “2” gL/gG [A] 224 250 250 400 500 - - -

102


www.pamensky.com

Built-in Auxiliary Contacts - CWM9 to CWM18

Type CWM9 CWM12 CWM18

Rated Insulation Voltage Ui

Acc. IEC; VDE 0660 [V] 1000

Acc. UL; CSA [V] 600

Rated Operating Voltage Ue

Acc. IEC; VDE 0660 [V] 690


Rated Thermal Current Ith <=55oC [A] 20

Rated Operating Current Ie

Acc. IEC 60947-5-1 / AC-15

110-127V [A] 10

220-240V [A] 10

380-400V [A] 6

415-450V [A] 5

500V [A] 4

660-690V [A] 2

Acc. UL; CSA A600


Acc. IEC 60947-5-1 / DC-13

24V [A] 6

48V [A] 4

110V [A] 2

220V [A] 0.7

440V [A] 0.7

Acc. UL; CSA P600

Making Capacity Im

AC-15 / AC-11 Ue <= 690V 50/60Hz [A] 250

DC-13 / DC-11 Ue <= 440Vdc [A] 250

Breaking Capacity Ic

AC-15 / AC-11 Ue <= 400V 50/60Hz [A] 250

DC-13 / DC-11 Ue <=220Vdc [A] 2

Short Circuit Protection with Fuses

Acc. IEC 60947-5-1 - gL/gG [A] 10

Minimum Switching Capacity [V/mA] 17/5

Electrical Endurance Million ops. 1

Mechanical Endurance Million ops. 10

Guaranteed Non-Overlap Time [ms] 1.5

Insulation Resistance [MOhm] >10


Control Circuit Ratings - AC Coil - CWM9 to CWM105



Acc. IEC; VDE 0660 [V] 1000



Acc. IEC; VDE 0660 [V] 690


Standard Voltages 60Hz [V] 24...600

Coil Operating limits

Monofrequency coils xUc 0.85…1.1

Pick-up xUc [V] 0.4...0.76 0.5...0.76 0.5...0.76

Drop-out xUc [V] 0.25...0.65 0.3...0.65 0.25...0.6

Reinforced coils xUc

Pick-up xUc [V] 0.4...0.7

Drop-out xUc [V] 0.3...0.6

Operating Time

Coil energization - N.O. [ms] 8...20 10...19 15...30

Coil de-energization - N.O. [ms] 6...13 5...25 9...15

Coil Consumption

Monofrequency coils

Sealed [VA] 5.5...9.3 9.5...12.5 16.8...25 16.8...25

Inrush [VA] 70 115 295 295

Thermal Power Dissipation

60Hz [W] 2.6 4.3 8.0

Power Factor

Closed Cos phi 0.28 0.34 0.32

Opened Cos phi 0.85 0.69 0.54

102


www.pamensky.com

CWM Standard Contactors - Technical DataControl Circuit Ratings - DC Coil - CWM9 to CWM105



Acc. IEC; VDE 0660 [V] 1000


Standard Voltages [V] 12...440 24...240 24...240

Coil Operating limits 0.85...1.1

Pick-up xUc [V] 0.4...0.7 0.45...0.75 0.7...0.8

Drop-out xUc [V] 0.15...0.4 0.15...0.45 0.4...0.6

Operating Time

Coil energization - N.O. [ms] 35...45 40...55 50...60

Coil de-energization - N.O. [ms] 7...12 30...65 55...60

Coil Consumption

Closed [W] 3.8...7.5 6 6.5

Magnetic circuit opened [W] 3.8...7.5 240 340

Electronic Module Control Circuit - CWM112 to CWME800



Acc. IEC; VDE 0660 [V] 1000



Acc. IEC; VDE 0660 [V] 690


Standard Voltages 50Hz; 60Hz; DC [V] 24…600

Coil Operating limits

xUc [V] 0.65…1.1

Pick-up xUc [V] 0.70...0.85

Drop-out xUc [V] 0.40...0.60

Operating Time

Coil energization - N.O. [ms] 60…70 60…70 60…70 60…70 60…70 64…68 66…70 66…70

Coil de-energization - N.O. [ms] 13…17 13…17 13…17 13…17 13…17 43…47 45…49 45…49

Coil Consumption

Closed AC [VA] 14.8 14.8 14.1 14.1 14.1 14 17 29

Opened AC [VA] 213 213 214 229 229 571 1000 1000

Closed DC [VA] 2.4 2.4 2.4 2.5 2.5 14 17 17

Opened DC [VA] 166 166 154 171 171 571 1000 1000

Thermal Power Dissipation

AC [W] 3.9 3.9 3.8 3.7 3.7 4.7 4.9 5.3

DC [W] 2.4 2.4 2.4 2.5 2.5 5.0 6.3 7.8

102


www.pamensky.com

Auxiliary Contact Block Ratings

Type BCXMF BCXML BCXMRL BLIM.02


Acc. IEC; VDE 0660 [V] 1000



Acc. IEC; VDE 0660 [V] 690


Rated Thermal Current Ith <=55oC [A] 10


Acc. IEC 60947-5-1 / AC-15 110-127V [A] 6

220-240V [A] 6

380-400V [A] 4

415-450V [A] 3.5

500V [A] 2.5

660-690V [A] 1.5

Acc. UL; CSA A600


Acc. IEC 60947-5-1 / DC-13 24V [A] 4

48V [A] 2

110V [A] 0.7

220V [A] 0.3

440V [A] 0.15

Acc. UL; CSA Q600

Making Capacity Im

AC-15 / AC-11 Ue <= 400V 50/60Hz [A] 90

DC-13 / DC-11 Ue <= 220Vdc [A] 90

Breaking Capacity Ic

AC-15 / AC-11 Ue <= 400V 50/60Hz [A] 60

DC-13 / DC-11 Ue <= 220Vdc [A] 0.95

Short Circuit Protection with Fuses

Acc. IEC 60947-5-1 - gL/gG [A] 10

Minimum Switching Capacity [V/mA] 17/5

Electrical Endurance Million ops. 1

Mechanical Endurance Million ops. 10

Guaranteed Non-Overlap Time [ms] 1.5

Insulation Resistance [MOhm] >10


102


www.pamensky.com

RW Thermal Overload RelaysRW overload relays are important equipment within the WEG Controls range of products. As

usual for WEG products, an extended operational service life is one of the main features you

will fi nd in RW overload relays. WEG’s RW Class 10 Thermal Overload Relays are designed

to work with, and compliment WEG’s minicontactors and contactors. Effectively, RW overload

relays can be mounted directly to WEG minicontactors and contactors, assuring electrical and

mechanical operation as an open across-the-line starter.

Features

Dial FLC SettingThe trip-current is set via an infi nitely adjustable dial designed for the motor’s full load current.

Temperature CompensationBecause RW overload relays include a fourth bimetallic strip in addition to the three that are

directly heated by the motor current, ambient temperature variations in the range of -20ºC

to +60ºC are no obstacle for accurate protection of your motors under even the toughest

conditions.

Phase Failure SensitivityWEG overload relays include phase failure sensitivity protection as standard. This feature

ensures fast tripping in case of phase loss, protecting your motor and avoiding expensive

repairs or corrective maintenance services.

Multi Function ButtonThe programmable RESET button can be selected to operate in a Manual or Automatic mode,

with or without TEST capabilities of the isolated “trip” NC and “alarm” NO auxiliary contacts.

The multifunction RESET / TEST button can be set in four different positions; H (manual

RESET only), HAND (manual RESET/TEST), AUTO (automatic RESET/ TEST) and A (automatic

RESET only). In HAND and AUTO positions, when RESET button is pushed, both NO (97-98)

and NC (95-96) contacts change states.

102


www.pamensky.com

RW - Part Number Specifi cation-

2

27-1D

4

D004

3

3

1

RW

1. RW Thermal Overload Relay

2. Frame Size and Terminal Type:

17-1D: to use with CWC07…016

17-2D: to use with CWC025

27-1D: to use with CWM9…25






407-1D: to use with CWME400…800


2: 2 NO Power Poles

4. Overload Setting Current:

RW17 RW27 RW67 RW117 RW317 RW407

Description Code Description Code Description Code Description Code Description Code Description Code

0.28 ... 0.40A D004 0.28 ... 0.40A D004 25 ... 40A U040 63 … 80A U080 100 … 150A U150 400 … 600A U600

11 … 32A U032 11 … 32A U032 63 … 80A U080 90 ... 112A U112 275 ... 420A U420 560 ... 840A U840

102


www.pamensky.com

Three Pole Contactors with AC Coil


For Contactor

Setting Range (A)

Max. Fuse

(A)Part Number List Price

Min. Max.

CWC07…CWC016 & CWCA0 (Mini-Contactor) 0.28 0.40 15 RW17-1D3-D004 $44

CWC07…CWC016 & CWCA0 (Mini-Contactor) 0.40 0.63 15 RW17-1D3-C063 44

CWC07…CWC016 & CWCA0 (Mini-Contactor) 0.56 0.80 15 RW17-1D3-D008 44




CWC07…CWC016 & CWCA0 (Mini-Contactor) 2.80 4.00 15 RW17-1D3-U004 44







CWC025 (Mini-Contactor) 15.0 23.0 90 RW17-2D3-U023 45

CWC025 (Mini-Contactor) 22.0 32.0 100 RW17-2D3-U032 45

CWM9...CWM40 0.28 0.40 15 RW27-1D3-D004 48

CWM9...CWM40 0.40 0.63 15 RW27-1D3-C063 48

CWM9...CWM40 0.56 0.80 15 RW27-1D3-D008 48

CWM9...CWM40 0.80 1.20 15 RW27-1D3-D012 48

CWM9...CWM40 1.20 1.80 15 RW27-1D3-D018 48

CWM9...CWM40 1.80 2.80 15 RW27-1D3-D028 48

CWM9...CWM40 2.80 4.00 15 RW27-1D3-U004 48

CWM9...CWM40 4.00 6.30 25 RW27-1D3-D063 48

CWM9...CWM40 5.60 8.00 30 RW27-1D3-U008 54

CWM9...CWM40 7.00 10.0 40 RW27-1D3-U010 54

CWM9...CWM40 8.00 12.5 50 RW27-1D3-D125 54

CWM9...CWM40 10.0 15.0 60 RW27-1D3-U015 54

CWM9...CWM40 11.0 17.0 60 RW27-1D3-U017 54

CWM9...CWM40 15.0 23.0 90 RW27-1D3-U023 54

CWM9...CWM40 22.0 32.0 90 RW27-1D3-U032 54

CWM32...CWM40 25.0 40.0 90 RW67-1D3-U040 92

CWM32...CWM40 32.0 50.0 125 RW67-1D3-U050 100

CWM50...CWM80 25.0 40.0 90 RW67-2D3-U040 100

CWM50...CWM80 32.0 50.0 125 RW67-2D3-U050 100

CWM50...CWM80 40.0 57.0 150 RW67-2D3-U057 100

CWM50...CWM80 50.0 63.0 150 RW67-2D3-U063 152

CWM50...CWM80 57.0 70.0 175 RW67-2D3-U070 152

CWM50...CWM80 63.0 80.0 175 RW67-2D3-U080 152

CWM95...CWM105 63.0 80.0 200 RW117-1D3-U080 152

CWM95...CWM105 75.0 97.0 225 RW117-1D3-U097 152

CWM95...CWM105 90.0 112 250 RW117-1D3-U112 152

CWM112E...CWM150E 75.0 97 225 RW117-2D3-U097 154

CWM112E...CWM150E 90.0 112 250 RW117-2D3-U112 154

CWM112E…CWM300E 100 150 300 RW317-1D3-U150 215

CWM112E…CWM300E 140 215 350 RW317-1D3-U215 215

CWM112E…CWM300E 200 310 500 RW317-1D3-U310 269

CWME400...CWME800 275 420 700 RW317-1D3-U420 269

CWME400...CWME800 400 600 1000 RW407-1D3-U600 632

CWME400...CWME800 560 840 1250 RW407-1D3-U840 692

RW Thermal Overload Relays - Accessories

RW Thermal Overload Relays - Table of Products

Mounting Brackets


Enables overload to be mounted directly to a panel via screws or DIN rail RW27-1D BF27D $14

Enables overload to be mounted directly to a panel via screws or DIN rail RW67-1D BF67.1D 24

Enables overload to be mounted directly to a panel via screws or DIN rail RW67-2D BF67.2D 24

Enables overload to be mounted directly to a panel via screws or DIN rail RW117-1D BF117D 30

102


www.pamensky.com

RW Thermal Overload Relays - Technical Data

General Ratings

Type RW17D RW27D RW67D RW117D RW317D

Standards Devices according to International Standards, IEC 60947-4-1 and Underwriters Laboratories, UL

Number of poles 3

Tripping Class 10

Phase failure sensitivity Yes

Temperature Compensation Yes

Multi function button R Yes


acc. IEC 60947-4-1 [V] 690 1000

acc. UL; CSA [V] 600

Rated Operation Voltage Ue

acc. IEC 60947-4-1 [V] 690 1000

acc. UL; CSA [V] 600


UimpkV 6

Current

direct yes no

alternating Hz up to 400 Hz 50/60 Hz

Degree of protection Protection against direct contact acc. VDE 0160 - Part 100 - IP20

Temperature Compensation -20 to +60oC (-4 to 140oF)

Storage -50 to +80oC (-58 to 176oF)

Operating -20 to +70oC (-4 to 158oF)

Pollution Degree 3

Mounting Direct on contactor or separately with the accessory

Power Dissipation per pole W up to 3 up to 5.5 -

WeightKgs. 0.15 0.147 0.31 0.52 2.3

Lbs. 0.33 0.323 0.683 1.15 5.06

Dimensions

height mm 45 79.5 73 100 155

width mm 79.5 45 50 75 115

lenght mm 92 92 106 99 166

Shock Resistance

IEC 60 068 part 2-27 g/ms 8/10

Front auxiliary contact 1 NO + 1 NC

Rated auxiliary contacts

24V A 4

60V A 3.5

125V A 3

AC (AC-14/15), 230V A 2

400V A 1.5

500V A 0.5

690V A 0.3

DC (DC-13/14), 24V A 1

60V A 0.5

110V A 0.25

220V A 0.1

Rated thermal current A 6

Short Circuit protection

Fuses type D or NH gL/gG 6

Terminal Capacity

Type RW17D RW27D RW67D RW117D RW317D

Terminal Description Cross / Slotted Combination Allen Head Slide bar

Fine - Stranded with Sleeve (mm2) 1.5 - 10 1.5 - 10 6.0 - 35 6.0 - 35 -

Coarse - Stranded / Solid (mm2) 1.5 - 6.0 1.5 - 6.0 6.0 - 35 25 - 35 -

Slide Bars max. (mm2) - - - - 2x(25x5)

Tightening Torque Nm 1.4 - 2.3 1.4 - 2.3 4.0 - 6.0 4.0 - 6.0 14 - 26

Stranded / Solid (UL / CSA) AWG - min and max. 14 - 6 14 - 6 18 - 2 8 – 1/0 8 – 1/0

Tightening Torque Lb-in 20 20 20 40 40

102


www.pamensky.com

Operating Positions

RW17D, RW27D, RW67D, RW117D, RW317D, RW407D

RW27D, RW67D, RW117D, RW317D, RW407D

RW17D with CWC07

Mounting without contactor

The relays can be mounted at any position.

Mounting without contactor

The mounting position showed in the left-hand figure is equivalent to 0° - not requiring a correction factor on the dial of the relay. The assembly can work with mounting variations of 0° to 180°. However, the mounting with the relay above the contactor, position between 135° and 225°, requires a correction factor of +10% on the dial of the relay. Laterally, as shown in the right-hand figure, the inclination can not exceed ±30° for perfect functioning of the contactor.

As shown in the left-hand figure, the inclination can not exceed ±30° for perfect functioning of the contactor. Laterally, as shown in the right-hand figure, the mounting position is equivalent to 0° - not requiring a correction factor on the dial of the relay. The assembly can work with mounting variations of 0° to 180°.

RW Thermal Overload Relays - Technical Data

102


www.pamensky.com

WEG Manual Motor Protectors are the state-of-the-art products available for the worldwide

market. With the latest technology and design, you’ll fi nd how easy is to save panel space

and to face almost any application in motor control. Built in a very compact frame size, WEG’s

Manual Motor Protectors combine, motor control, disconnect means short-circuit and motor

overload protections in just one component.

These devices include pushbutton operators or a three-position rotary ON-TRIP-OFF handle,

which can be padlocked in the OFF position. WEG Manual Motor Protectors are designed for

DIN rail mounting, while lugs for direct panel mounting are also available as an accessory.

Features

• High short-circuit interrupting rating – up to

50kA @ 480V

• Current limiting short-circuit protection

• Thermal overload protection Class 10

• Phase loss sensitivity protection

• Ambient temperature compensation -4ºF

+140ºF (-20ºC +60ºC)

• Lockable rotary handle mechanism for

disconnect

• Visual indication of ON-TRIP-OFF status

• 35mm DIN-rail mounting

• Snap-in accessories

• Finger safe protected terminals

• Rated for DC applications

• Test trip feature

• Coordination type 2 per IEC60947-4-1 and

UL508E, with WEG’s CWM contactors

• Manual Motor Starters

• Group motor installations (per NEC Article

430)

• Multi-motor starter applications

• Suitable for motor disconnect applications

• UL Type-E self protected combination starter

MPW Manual Motor Protector

102


www.pamensky.com

MPW - Part Number Specifi cation- -

2 3

25 3

4

U016

1

MPW

1. MPW Manual Motor Protector

2. Frame Size: 25: to use with CWC07…025 & CWM9…40

65: to use with CWM32…80

100: to use with CWM95…105


4. Overload Setting Current:

MPW25 MPW65 MPW100


0.10 ... 0.16A C016 10 … 16A U016 55 … 75A U075

25 … 32A U032 50 ... 65A U065 80 ... 100A U100

102


www.pamensky.com

MPW Manual Motor Protector - Table of ProductsManual Motor Protector MPW25


Maximum UL Horsepower Thermal

Setting

Short-Circuit

interruption capacity Part NumberList

PriceSingle Phase Three Phase

115V 230V 200V 230V 460V 575V [A] 480V 600V

- 1/10 1/4 1/3 3/4 1 1.0 - 1.6 50kA 25kA MPW25-3-D016 $100

- 1/6 1/2 1/2 1 1/2 1 1/2 1.6 - 2.5 50kA 25kA MPW25-3-D025 100

1/8 1/3 3/4 1 2 3 2.5 - 4.0 50kA 25kA MPW25-3-U004 100

1/4 3/4 1 1/2 1 1/2 3 5 4.0 - 6.3 50kA 25kA MPW25-3-D063 100

1/2 1 1/2 3 3 5 7 1/2 6.3 - 10 50kA 25kA MPW25-3-U010 110

1 3 5 5 10 15 10 - 16 50kA 25kA MPW25-3-U016 110

1 1/2 3 5 7 1/2 15 15 16 - 20 50kA 25kA MPW25-3-U020 124

2 3 7 1/2 7 1/2 15 20 20 - 25 50kA 25kA MPW25-3-U025 146

- 5 10 10 20 25 25 - 32 42kA 25kA MPW25-3-U032 158

Manual Motor Protector MPW65



Setting

Short-Circuit



115V 230V 200V 230V 460V 575V [A] 480V 600V

3 7 1/2 - 15 25 30 32 ... 40 35kA 10kA MPW65-3-U040 $300

- 10 15 15 30 40 40 ... 50 35kA 10kA MPW65-3-U050 300

5 10 20 20 50 60 50 ... 65 35kA 10kA MPW65-3-U065 300

Manual Motor Protector MPW100



Setting

Short-Circuit



115V 230V 200V 230V 460V 575V [A] 480V 600V

5 15 20 25 50 60 55 ... 75 50kA 10kA MPW100-3-U075 $500

7 1/2 20 25 30 60 75 70 ... 90 50kA 10kA MPW100-3-U090 534

10 20 30 30 75 100 80 ... 100 50kA 10kA MPW100-3-U100 534

102


www.pamensky.com

MPW Manual Motor Protector - AccessoriesAuxiliary Contact Blocks

Description For Protector Part Number List Price

1NO&1NC auxiliary contact block front mounting - 250Vmax. MPW25 & MPW65 ACBF-11 $14

1NO&1NC auxiliary contact block left side mounting - 600Vmax. MPW25 & MPW65 ACBS-11 14

2NO Auxiliary contact block left side mounting - 600Vmax. MPW25 & MPW65 ACBS-20 14

2NC Auxiliary contact block left side mounting - 600Vmax. MPW25 & MPW65 ACBS-02 14

1NO&1NC auxiliary contact block front mounting - 250Vmax. MPW100 ACBF-11 MPW100 28

1NO&1NC auxiliary contact block left side mounting - 600Vmax. MPW100 ACBS-11 MPW100 40

2NO Auxiliary contact block left side mounting - 600Vmax. MPW100 ACBS-20 MPW100 40

2NC Auxiliary contact block left side mounting - 600Vmax. MPW100 ACBS-02 MPW100 40

Accessories for Group Motor Installation


Income power terminal for bus bar system MPW25 FTBBS $23

Bus bar system 45mm (for 2 MPW without side mounting auxiliary contacts) MPW25 BBS45-2 24




Bus bar system 54mm (for 2 MPW with side mounting auxiliary contacts) MPW25 BBS54-2 28




Link Modules


Mechanical and electrical link module for CWC07 to CWC016 miniature contactor

seriesMPW25 ECCMP-07 $11

Mechanical and electrical link module for CWM9…CWM25 contactor series MPW25 ECCMP-25 11

Accessories for Combination Type-E Construction


Line power terminal MPW25 LST25 $31

Trip Signaling and Alarm Contact Block (1NO&1NC for Short-circuit and 1NO&1NC for

Overload) MPW25 & MPW65 TSB-22 33

Line power terminal MPW65 LST65 68

Insulators MPW100 IB MPW100 15

Trip Signaling and Alarm Contact Block (1NO&1NC for Short-circuit and Overload) MPW100 TSB-11 MPW100 40

102


www.pamensky.com

Through-the-door Rotary Mechanisms NEMA 1


Rotary NEMA 1 Through the Door Mechanism - gray/black handle with 130mm shaft MPW25 RMMP-130 $58

Rotary NEMA 1 Through the Door Mechanism - yellow/red handle with 130mm shaft MPW25 RMMP-130-E 58

Rotary NEMA 1 Through the Door Mechanism - gray/black handle with 330mm shaft MPW25 RMMP-330 69

Rotary NEMA 1 Through the Door Mechanism - yellow/red handle with 330mm shaft MPW25 RMMP-330-E 69

Rotary NEMA 1 Through the Door Mechanism - gray/black handle with 130mm shaft MPW65 RMMP65-130 58

Rotary NEMA 1 Through the Door Mechanism - yellow/red handle with 130mm shaft MPW65 RMMP65-130-E 58

Rotary NEMA 1 Through the Door Mechanism - gray/black handle with 330mm shaft MPW65 RMMP65-330 69

Rotary NEMA 1 Through the Door Mechanism - yellow/red handle with 330mm shaft MPW65 RMMP65-330-E 69

Rotary NEMA 1 Through the Door Mechanism - gray/black handle with 115 mm shaft MPW100 MR MPW100-115 80

Rotary NEMA 1 Through the Door Mechanism - gray/black handle with 315mm shaft MPW100 MR MPW100-315 80

Through-the-door Rotary Mechanisms NEMA 4X


Rotary NEMA 4X Through the Door Mechanism - gray/black handle with 130mm shaft MPW25 MRX-130 62

Rotary NEMA 4X Through the Door Mechanism - yellow/red handle with 130mm shaft MPW25 MRX-130-E 62

Rotary NEMA 4X Through the Door Mechanism - gray/black handle with 330mm shaft MPW25 MRX-330 72

Rotary NEMA 4X Through the Door Mechanism - yellow/red handle with 330mm shaft MPW25 MRX-330-E 72

Rotary NEMA 4X Through the Door Mechanism - black/red handle with 130mm shaft MPW65 MRX65-130 63

Rotary NEMA 4X Through the Door Mechanism - yellow/red handle with 130mm shaft MPW65 MRX65-130-E 63

Rotary NEMA 4X Through the Door Mechanism - black/red handle with 330mm shaft MPW65 MRX65-330 72

Rotary NEMA 4X Through the Door Mechanism - yellow/red handle with 330mm shaft MPW65 MRX65-330-E 72

Rotary NEMA 4X Through the Door Mechanism - gray/black handle with 130mm shaft MPW100 MRX100-130 86

Rotary NEMA 4X Through the Door Mechanism - yellow/red handle with 130mm shaft MPW100 MRX100-130E 86

MPW Manual Motor Protector - Accessories

102


www.pamensky.com

MPW Manual Motor Protector - Technical DataGeneral Ratings

Part Number MPW25 MPW65 MPW100

Maximum Rated Current Imax

(Iu) 32A 65A 100A

Number of poles 3 3 3

Instantaneous short-circuit 13 x Iemax. 13 x I

emax. 13 x I

emax.

Rated operational voltage Ue

690V 1) 690V 690V

Rated operational frequency 2) 50/60Hz 50/60Hz 50/60Hz

Insulation Voltage Ui

690V 690V 1000V

Rated impulse withstand voltage Uimp

6kV 6kV 8kV

Utilization category IEC 60 947-2 (Circuit breaker) A A A

IEC 60 947-4-1 (Motor starter) AC-3 AC-3 AC-3

Tripping Test Yes Yes Yes

Overload Protection Yes Yes Yes

Phase failure sensitivity Yes Yes Yes

Tripping indication Yes Yes Yes

Tripping Class 10 10 10

Maximum operation per hour Operations/hour 15 15 25

Altitude (m) 2000 2000 2000

Degree of protection IP20 IP20 IP20

Mechanical life span Number of operations 100,000 50,000 50,000

Electrical life span Number of operations 100,000 25,000 25,000

Ambient temperatures allowed

Transport and storage -50...+80ºC -50...+80ºC -50...+80ºC

Operation 3) -20...+70ºC -20...+70ºC -20...+60ºC

Temperature compensation -20...+60ºC -20...+60ºC -20...+60ºC

Resistance to Impact (g) 15 15 25

Standards

IEC/EN 60 947-1. DIN VDE 0660 (part 100) Yes Yes Yes

IEC/EN 60 947-2. DIN VDE 0660 (part 101) Yes Yes Yes

IEC/EN 60 947-4-1. DIN VDE 0660 (part 102) Yes Yes Yes

Terminal capacity

Type of terminal Flat Box Box

Tightening torqueN.m 2...2.5 4...6 4...6

lb.in 18...22 35...55 35...53

Type of screws Philips (Nº2) Allen (4mm) Allen (4mm)

Dimensions

Width (mm) 45 54 70

Height (mm) 97 125 165

Depth (mm) 98 157 171

Altitude Correction Factor

Altitude

(above sea level) - hRated operational voltage U

eCurrent correction factor I

u

h ≤ 2000 m 690 V 1 x Iu

2000 < h ≤ 3000 m 550 V 0,96 x Iu

3000 < h ≤ 4000 m 480 V 0,93 x Iu

4000 < h ≤ 5000 m 420 V 0,90 x Iu

The MPW motor protective circuit breakers do not undergo any

change to their specifi ed performance when applied at an altitude of

up to 2000 meters above sea level.

However, as the altitude increases, the atmospheric properties vary

in terms of dielectric rigidness and pressure.

Therefore, current and voltage correction factors must be applied for

altitudes exceeding 2000 meters, as shown in the table on the left:

Notes: 1) 500V with plastic box;

2) On request: 0 to 400Hz

3) Reduce current for temperatures exceeding +60°C (87% to 70°C)

102


www.pamensky.com

MPW Manual Motor Protector - Technical DataAuxiliary Contact Block - ACB - MPW25 & MPW65

Part Number ACBF-11 ACBS-11. ACBS-20. ACBS-02. TSB

For use with MPW16/16i. MPW25/25i/25t. MPW65/65i

Utilization Category 24 VAC 220-230 VAC 24 VAC 230 VAC 400 VAC 690 VAC

AC-15 2 A 0.5 A 6 A 6 A 3 A 1 A

AC-12 2.5 A 2.5 A 10 A 10 A 10 A 10 A

DC-1324 VDC 48 VDC 60 VDC 24 VDC 110 VDC 220 VDC 440 VDC

1 A 0.3 A 0.15 A 2 A 0.5 A 0.25 A 0.1 A

Type of terminal Flat

Type of screw Philips (Nº2)

Tightening torque 0.8…1.2 N.m (7…10 lb.in)

Rigid cable1 or 2 x (0.5...1.5 mm2). 1 or 2 x (0.75…2.5 mm2). 2 x (18…14 AWG)

Flexible cable

Backup fuses gL/gG 10 A

Auxiliary Contact Block - ACB - MPW100

Part Number ACBF-11 MPW100 ACBS-11/ACBS-20/ACBS-02/TSB AT-11 MPW100

For use with MPW100

Utilization Category 240 VAC 24 VAC 240 VAC

AC-15 3 A 6 A 4 A

DC-1324 VDC 220VDC 24 VDC 220VDC

1 A 0.1 A 2 A 0.25 A



Rigid cable 1 (0.5…2.5mm2 / 20…14 AWG) 1 or 2 x (0.5…2.5mm2 / 20…14 AWG)

Flexible cable 1(0.5...4mm2 / 20...10 AWG) or 2(0.75...2.5mm2 / 18...14 AWG)

Back-up fuses gL/gG 16 A

Undervoltage Release - URMP

Part Number URMP URMP V_ _ MPW100

For use with MPW16/16i. MPW25/25i/25t. MPW65/65i MPW100

Operating voltage

(Enables cir. breaker switch ON)0.85...1.1xU

s

Non-operating voltage

(guarantees circuit breaker switch OFF)0.7...0.35xU

s

Energization Consumption 20.2 VA / 13 W 8.5 VA / 6 W

Consumption 7.2 VA / 2.4 W 3 VA / 1.2 W

Max. opening time 20 ms


Type of screws Philips (Nº2)


Rigid cable 1 or 2 x (0.5...1.5 mm2). 1 or 2 x (0.75…2.5 mm2).

2 x (18…14 AWG)

1 or 2 x (0.5...2.5 mm2 / 20...14 AWG)

Flexible cable 1 (0.5...4 mm2 / 20...10 AWG) or 2 x (0.75...2.5 mm2 / 18...14 AWG)


Shunt Release - SRMP

Part Number SRMP SRMP-K_ _ MPW100

For use with MPW16/16i. MPW25/25i/25t. MPW65/65i MPW100

Operating Voltage

(guarantee circuit breaker switch OFF)0.7...1.1xUs

Consumption - Energization 20.2 VA / 13 W 8.5 VA / 6 W

Maximum opening time 20 ms




Rigid cable 1 or 2 x (0.5...1.5 mm2). 1 or 2 x (0.75…2.5 mm2)

2 x (18…14 AWG)

1 ou 2 x (0.5...2.5 mm2 / 20...14 AWG)

Flexible cable 1 (0.5...4 mm2 / 20...10 AWG) or 2 x (0.75...2.5 mm2 / 18...14 AWG)


102


www.pamensky.com

WEG has used its leading-edge technology & development capability to design the CSW

series of pushbuttons, pilot lights, selector switches and accessories. These user friendly and

durable Ø22mm pilot devices are used in many industrial applications and environments.

Besides the brightness, the BIDL blocks have many other valuable characteristics, such as:

• Long life expectancy

• Great performance on shock and vibration applications

• Extremely low power consumption and thermal dissipation

• High luminosity and color defi nition (independant of the lens)

Fast and easy assembling system

The Mounting of the contact blocks to the operator (pushbutton, selector switch or indicator)

is done via a snap on fl ange which ensures a fast tight fi t. This system can also be removed

quickly, without tools. Each block can be mounted or removed individually: to assemble,

just snap the components together and a common screwdriver is all that is necessary for

disassembly. The ergonomic design of the new locking ring allows hand tightening, without

the need for a screwdriver.

Contact blocks – safety and reliability

High effi ciency self-cleaning contact blocks; Pure Silver Contacts (Ag100), ensures maximum

reliability in every condition even at low energy levels (5mA/12V). NC Contacts with “Positive

Break” system, ensures circuit interruption.

Pushbuttons and Pilot Lights

102


www.pamensky.com

Flush Color Part Number List Price

White

Red

Green

Yellow

Blue

Black

CSW-BF0

CSW-BF1

CSW-BF2

CSW-BF3

CSW-BF4

CSW-BF5

$6.80

6.80

6.80

6.80

6.80

6.80

Double Color Part Number List Price

N/A CSW-BD $14.30

Illuminated Flush Color Part Number List Price

White

Red

Green

Yellow

Blue

CSW-BFI0

CSW-BFI1

CSW-BFI2

CSW-BFI3

CSW-BFI4

$11.40

11.40

11.40

11.40

11.40

Emergency Stop - Twist Release Color Part Number List Price

Red CSW-BEG $15.10

Pilot Lights Color Part Number List Price

White

Red

Green

Yellow

Blue

CSW-SD0

CSW-SD1

CSW-SD2

CSW-SD3

CSW-SD4

$10.10

10.10

10.10

10.10

10.10

Pushbuttons and Pilot Lights - Table of Products

102


www.pamensky.com

Pushbuttons and Pilot Lights - Table of Products

KNOB LEVER with KEY(1) ILLUMINATED Colour Code

substitute # for colour code

(see right)

Clear/White 0

Red 1

Green 2

Yellow 3

Blue 4

Part Number List Price Part Number List Price Part Number List Price Part Number List Price POSITION DIAGRAM

CSW-CK2F45 $16 CSW-CA2F45 $17 CSW-CY2F45 $45 1

CSW-CK2R45 18 CSW-CA2R45 19 1

CSW-CK2F90 16 CSW-CA2F90 17 CSW-CKI2F90* $10 2


CSW-CK3F45 16 CSW-CA3F45 17 CSW-CY3F45 45 CSW-CKI3F45* 10 3


CSW-CK3RE45 18 CSW-CA3RE45 19 3

CSW-CK3RD45 18 CSW-CA3RD45 19 3

(1) Key is released in any position

Substitute CY for CYD for key release on the right only

Substitute CY for CYE for key release on the left only

Substitute CY for CYC for key release in the center only

DIAGRAM 1 DIAGRAM 2 DIAGRAM 3

Handle Position

Contact Status

2 3 1

0

-

I

Handle Position

Contact Status

2 3 1

I

II

Handle Position

Contact Status

2 3 1

0

I

II

Contacts in rest position

Contacts actuated

Mounting position for the LED or lamp blocks only

102


www.pamensky.com

Pushbuttons and Pilot Lights - Assembled UnitsPushbuttons

Description Parts Part Number List Price

Stop pushbutton, 1NC, red CSW-BF1, CSW-BC01 CSW-BF1-01 $12.70

Start pushbutton, 1NO, green CSW-BF2, CSW-BC10 CSW-BF2-10 12.70

pushbutton, 1NO, black CSW-BF5, CSW-BC10 CSW-BF5-10 12.70

Emergency stop pushbutton w/1NC twist release CSW-BEG-01, CSW-BC01 CSW-BEG-01 22.00

Double pushbutton Start/Stop 1NO/1NC CSW-BD, CSW-BC11 CSW-BD-11 26.00

Selector Switches


2 position selector switch with 1 NO CSW-CK2F45, CSW-BC10 CSW-CK2F45-10 $23.00

3 position selector switch with 2 NO CSW-CK3F45, CSW-BC20 CSW-CK3F45-20 29.00

Pilot Lights


Pilot light colour red, with LED 110 V CSW-SD1, BIDL110-130VAC1 CSW-SD1-D61 $30.00

Pilot light colour green, with LED 110 V CSW-SD2, BIDL110-130VAC2 CSW-SD2-D61 30.00

Illuminated Pushbutton


Illuminated pushbutton LED red, 1 NC, 110 V CSW-BFI1, CSW-BC01, BIDL110-130VAC1 CSW-BFI1-01 $37.00

Illuminated pushbutton LED green, 1 NO, 110 V CSW-BFI2, CSW-BC10, BIDL110-130VAC2 CSW-BFI2-10 37.00

102


www.pamensky.com

Single Contact Block Double Contact Block

1NC

Part Number: CSW-BC01

1NO


List Price: $5.10

1NO-1NC


2NO


List Price: $9.20

Push-on / Push-off Block Full Voltage AC/DC Lamp Block

Part Number: CSW-BR

- Device for fl ush, extended and mushroom push-

buttons

List Price: $8.50

Note: Use only with single contact blocks. 1NO-

-contacts must be CSW-BCA10 (early make) type.

Part Number: CSW-BR

List Price: $8.50

Note: For BA9S lamps

380V / 2W max.

LED Block Colour Code

Part Numbers:

24Vac/Vdc: BIDL24VAC/VDC#

110-130Vac: BIDL110-130VAC#

220-240Vac: BIDL220-240VAC#

List Price: $17.60

Note: Replace # with desired colour code

(see right)

Clear/White 0

Red 1

Green 2

Yellow 3

Blue 4

Pushbuttons and Pilot Lights - Accessories

102


www.pamensky.com

Pushbuttons and Pilot Lights - Technical DataStandards IEC/EN 60947-5-1, VDE 0660, NFC63140, UL 508, UL 50, CENELEC EN50007

Rated insulation voltage 660 Vac / Vdc

Degree of protection IP66 (IEC/EN 60529)

Degree of protection - Terminals IP2X (IEC/EN 60529)

UL ratings Type 1, 2, 3, 3R, 35, 4, 4X, 5, 12, 12K e 13

Electrical ratings

Conventional thermal current Ith = 10A (IEC 947-5-1)

Utilization category AC-15 (V) (A)

24 10

48 10

60 10

110 6

230 3

400 2

500 1.5

600 1.2

Utilization category DC-13 (V) (A)

24 2.5

48 1.4

60 1

110 0.55

230 0.27

400 0.2

600 0.1

UL / CSA ratings

Contacts resistance

AC / Heavy Duty (A600)

DC / Standard Duty (Q600)

≤ 25mΩ (IEC/EN 60255)

Short circuit protection 16A gL/gG fuse or MPW25-10

Electrical shock protection Class II

Rated impulse voltage 2.5 kV (IEC 947-5-1)

Terminal capacity 1 or 2 x (0.5 - 2.5mm2) / 1 or 2 x 14-20AWG

Temperature range -25ºC to 70ºC (-13ºF to 158ºF)

Shock resitance No damage or disassembling at 100g for all devices according to MIL 202 Bmethod 202A ≤ ½ sinusoid 11ms

Vibration resistance 16g with frequency range from 40 to 500Hz

IEC/EN 6068-2-6 and max shifting 0.75mm (peak-to-peak)

Mechanical endurance

Pushbuttons 3 x 106

Selector Switches 1 x 106

Emergency-Stop 3 x 105

Maximum number of contacts AF3 Flange AF5 Flange

Pushbuttons (BF) Max. 6 Max 10

101

Reference 5.1

www.pamensky.com

Variable Frequency Drive Sizing GuideCFW 08 Plus

Motor CFW-08 Plus Variable Frequency Drive Part Number

HP RPM Frame Voltage 230V 460V 575V

1

3600 143T 208-230/460 & 575V CFW080040B2024EON1A1 CFW080026T3848EON1A1 CFW080017T5060EON1A1




1.5





2





3

3600 W182T 208-230/460 & 575V CFW080100B2024EON1A1 CFW080065T3848EON1A1 CFW080042T5060EON1A1

1800 W182T 208-230/460 & 575V CFW080100B2024EON1A1 CFW080065T3848EON1A1 CFW080042T5060EON1A1



5

3600 184T 208-230/460 & 575V CFW080160T2024EON1A1 CFW080100T3848EON1A1 CFW080070T5060EON1A1




7.5





10





15

3600 254T 208-230/460 & 575V CFW080240T3848EON1A1

1800 254T 208-230/460 & 575V CFW080240T3848EON1A1

1200 284T 208-230/460 & 575V CFW080240T3848EON1A1

900 286T 208-230/460 & 575V CFW080240T3848EON1A1

20

3600 256T 208-230/460 & 575V CFW080300T3848EON1A1

1800 256T 208-230/460 & 575V CFW080300T3848EON1A1

1200 286T 208-230/460 & 575V CFW080300T3848EON1A1

900 324T 208-230/460 & 575V CFW080300T3848EON1A1

Notes: This chart is designed as a guide only. For specifi c sizing please contact V.J. Pamensky Canada Inc.

101

Reference5.2

www.pamensky.com

Variable Frequency Drive Sizing GuideCFW 09

Motor CFW-09 Variable Frequency Drive Part Number


1

3600 143T 208-230/460 & 575V CFW090006T2223ESZ CFW090003T3848ESZ CFW090002T5060ESZ




1.5





2





3

3600 W182T 208-230/460 & 575V CFW090010T2223ESZ CFW090005T3848ESZ CFW090004T5060ESZ

1800 W182T 208-230/460 & 575V CFW090010T2223ESZ CFW090005T3848ESZ CFW090004T5060ESZ



5





7.5





10





15





20





25

3600 284TS 208-230/460 & 575V CFW090070T2223ESZ CFW090038T3848ESZ CFW090027T5060ESZ




30




900 364/5T 208-230/460 & 575V CFW090086T2223ESZ CFW090045T3848ESZ CFW090032T5060ESZ

40





50





101

Reference 5.3

www.pamensky.com




60

3600 364/5TS 208-230/460 & 575V CFW090180T2223ESZ CFW090086T3848ESZ CFW090063T5060ESZ




75

3600 364/5TS 208-230/460 & 575V CFW090240T2223ESZ CFW090105T3848ESZ CFW090079T5060ESZ




100

3600 404/5TS 208-230/460 & 575V CFW090142T3848ESZ CFW090107T5069ESZ

1800 404/5T 208-230/460 & 575V CFW090142T3848ESZ CFW090107T5069ESZ



125

3600 444/5TS 460 & 575V CFW090180T3848ESZ CFW090147T5069ESZ

1800 444/5T 460 & 575V CFW090180T3848ESZ CFW090147T5069ESZ



150

3600 445TS 460 & 575V CFW090180T3848ESZ CFW090147T5069ESZ

1800 445T 460 & 575V CFW090180T3848ESZ CFW090147T5069ESZ



200





250





300

3600 586/7TS 460 & 575V CFW090361T3848ESZ CFW090315T5069ESZ




Notes: This chart is designed as a guide only. For specifi c sizing or sizing for larger motors please contact V.J. Pamensky Canada Inc.

101

Reference5.4

www.pamensky.com




1

3600 143T 208-230/460 & 575V CFW110006B2ON1Z CFW110003T40N1Z CFW110002T5ON1NFZ




1.5





2





3

3600 W182T 208-230/460 & 575V CFW110010T2ON1Z CFW110005T40N1Z CFW110004T5ON1NFZ

1800 W182T 208-230/460 & 575V CFW110010T2ON1Z CFW110005T40N1Z CFW110004T5ON1NFZ

1200 213T 208-230/460 & 575V CFW110010T2ON1Z CFW110005T40N1Z CFW110004T5ON1NFZ


5





7.5





10





15





20

3600 256T 208-230/460 & 575V CFW110070T2ON1Z CFW110038T40N1Z CFW110022T6SZ




25

3600 284TS 208-230/460 & 575V CFW110086T2SZ CFW110045T40N1Z CFW110027T6SZ

1800 284T 208-230/460 & 575V CFW110086T2SZ CFW110045T40N1Z CFW110027T6SZ



30

3600 286TS 208-230/460 & 575V CFW110105T2SZ CFW110058T40N1Z CFW110032T6SZ



900 364/5T 208-230/460 & 575V CFW110105T2SZ CFW110058T40N1Z CFW110032T6SZ

40

3600 324TS 208-230/460 & 575V CFW110142T2SZ CFW110070T4SZ CFW110044T6SZ

1800 324T 208-230/460 & 575V CFW110142T2SZ CFW110070T4SZ CFW110044T6SZ

1200 364/5T 208-230/460 & 575V CFW110142T2SZ CFW110070T4SZ CFW110044T6SZ

900 364/5T 208-230/460 & 575V CFW110142T2SZ CFW110070T4SZ CFW110044T6SZ

50

3600 326TS 208-230/460 & 575V CFW110180T2ON1Z CFW110088T4SZ CFW110053T6ON1NBYZ

1800 326T 208-230/460 & 575V CFW110180T2ON1Z CFW110088T4SZ CFW110053T6ON1NBYZ

1200 364/5T 208-230/460 & 575V CFW110180T2ON1Z CFW110088T4SZ CFW110053T6ON1NBYZ

900 404/5T 208-230/460 & 575V CFW110180T2ON1Z CFW110088T4SZ CFW110053T6ON1NBYZ

101

Reference 5.5

www.pamensky.com




60

3600 364/5TS 208-230/460 & 575V CFW110211T2ON1Z CFW110105T40N1Z CFW110063T6ON1NBYZ

1800 364/5T 208-230/460 & 575V CFW110211T2ON1Z CFW110105T40N1Z CFW110063T6ON1NBYZ



75

3600 364/5TS 208-230/460 & 575V CFW110142T40N1Z CFW110080T6ON1NBYZ

1800 364/5T 208-230/460 & 575V CFW110142T40N1Z CFW110080T6ON1NBYZ



100

3600 404/5TS 208-230/460 & 575V CFW110180T40N1Z CFW110107T6ON1NBYZ




125

3600 444/5TS 460 & 575V CFW110211T40N1Z CFW110125T6ON1NBYZ

1800 444/5T 460 & 575V CFW110211T40N1Z CFW110125T6ON1NBYZ



150

3600 445TS 460 & 575V CFW110242T4SZ CFW110150T6ON1NBYZ

1800 445T 460 & 575V CFW110242T4SZ CFW110150T6ON1NBYZ

1200 447T 460 & 575V CFW110242T4SZ CFW110150T6ON1NBYZ

900 504/5T 460 & 575V CFW110242T4SZ CFW110150T6ON1NBYZ

200

3600 447TS 460 & 575V CFW110312T4SZ CFW110216T6ONBYZ

1800 447T 460 & 575V CFW110312T4SZ CFW110216T6ONBYZ



250

3600 447TS 460 & 575V CFW110370T4SZ CFW110289T6ONBYZ


1200 586/7T 460 & 575V CFW110370T4SZ CFW110289T6ONBYZ


300

3600 586/7TS 460 & 575V CFW110477T4SZ CFW110315T6ONBYZ




Notes: This chart uses Normal Duty (ND) ratings for sizing. See CFW-11 product table for more information.

This chart is designed as a guide only. For specifi c sizing or sizing for larger motors please contact V.J. Pamensky Canada Inc.

101

Reference5.6

www.pamensky.com




1

3600 143T 208-230/460 & 575V CFW700A06POB2DBN1 CFW700A03P6T4DBN1 CFW700B02P9T5DBN1




1.5





2





3

3600 W182T 208-230/460 & 575V CFW700A10POT2DBN1 CFW700A05P0T4DBN1 CFW700B04P2T5DBN1

1800 W182T 208-230/460 & 575V CFW700A10POT2DBN1 CFW700A05P0T4DBN1 CFW700B04P2T5DBN1

1200 213T 208-230/460 & 575V CFW700A10POT2DBN1 CFW700A05P0T4DBN1 CFW700B04P2T5DBN1

900 215T 208-230/460 & 575V CFW700A10POT2DBN1 CFW700A05P0T4DBN1 CFW700B04P2T5DBN1

5

3600 184T 208-230/460 & 575V CFW700B24POT2DBN1 CFW700A10P0T4DBN1 CFW700B07P0T5DBN1




7.5

3600 213T 208-230/460 & 575V CFW700B28POT2DBN1 CFW700B17P0T4DBN1 CFW700B10P0T5DBN1




10





15

3600 254T 208-230/460 & 575V CFW700C54POT2DBN1 CFW700B31P0T4DBN1 CFW700B17P0T5DBN1




20

3600 256T 208-230/460 & 575V CFW700C70POT2DBN1 CFW700C38P0T4DBN1 CFW700D22P0T5NBN1




25

3600 284TS 208-230/460 & 575V CFW700D86POT2DBN1 CFW700C45P0T4DBN1 CFW700D27P0T5NBN1

1800 284T 208-230/460 & 575V CFW700D86POT2DBN1 CFW700C45P0T4DBN1 CFW700D27P0T5NBN1



30

3600 286TS 208-230/460 & 575V CFW700D0105T2DBN1 CFW700C58P5T4DBN1 CFW700D32P0T5NBN1

1800 286T 208-230/460 & 575V CFW700D0105T2DBN1 CFW700C58P5T4DBN1 CFW700D32P0T5NBN1

1200 326T 208-230/460 & 575V CFW700D0105T2DBN1 CFW700C58P5T4DBN1 CFW700D32P0T5NBN1

900 364/5T 208-230/460 & 575V CFW700D0105T2DBN1 CFW700C58P5T4DBN1 CFW700D32P0T5NBN1

40

3600 324TS 208-230/460 & 575V CFW700E0142T2NBN1C3 CFW700D70P5T4DBN1 CFW700D44P0T5NBN1

1800 324T 208-230/460 & 575V CFW700E0142T2NBN1C3 CFW700D70P5T4DBN1 CFW700D44P0T5NBN1

1200 364/5T 208-230/460 & 575V CFW700E0142T2NBN1C3 CFW700D70P5T4DBN1 CFW700D44P0T5NBN1

900 364/5T 208-230/460 & 575V CFW700E0142T2NBN1C3 CFW700D70P5T4DBN1 CFW700D44P0T5NBN1

50

3600 326TS 208-230/460 & 575V CFW700E0180T2NBN1C3 CFW700D88P0T4DBN1 CFW700E53P0T5NBN1C3

1800 326T 208-230/460 & 575V CFW700E0180T2NBN1C3 CFW700D88P0T4DBN1 CFW700E53P0T5NBN1C3

1200 364/5T 208-230/460 & 575V CFW700E0180T2NBN1C3 CFW700D88P0T4DBN1 CFW700E53P0T5NBN1C3

900 404/5T 208-230/460 & 575V CFW700E0180T2NBN1C3 CFW700D88P0T4DBN1 CFW700E53P0T5NBN1C3

101

Reference 5.7

www.pamensky.com




60

3600 364/5TS 208-230/460 & 575V CFW700E0211T2NBN1C3 CFW700E0105T4NBN1C3 CFW700E63P0T5NBN1C3

1800 364/5T 208-230/460 & 575V CFW700E0211T2NBN1C3 CFW700E0105T4NBN1C3 CFW700E63P0T5NBN1C3



75

3600 364/5TS 208-230/460 & 575V CFW700E0142T4NBN1C3 CFW700E80P0T5NBN1C3

1800 364/5T 208-230/460 & 575V CFW700E0142T4NBN1C3 CFW700E80P0T5NBN1C3



100

3600 404/5TS 208-230/460 & 575V CFW700E0180T4NBN1C3 CFW700E0107T5NBN1C3

1800 404/5T 208-230/460 & 575V CFW700E0180T4NBN1C3 CFW700E0107T5NBN1C3



125

3600 444/5TS 460 & 575V CFW700E0211T4NBN1C3 CFW700E0125T5NBN1C3

1800 444/5T 460 & 575V CFW700E0211T4NBN1C3 CFW700E0125T5NBN1C3



150

3600 445TS 460 & 575V CFW700E0150T5NBN1C3

1800 445T 460 & 575V CFW700E0150T5NBN1C3

1200 447T 460 & 575V CFW700E0150T5NBN1C3

900 504/5T 460 & 575V CFW700E0150T5NBN1C3

Notes: This chart uses Normal Duty (ND) ratings for sizing. See CFW-700 product table for more information.

This chart is designed as a guide only. For specifi c sizing please contact V.J. Pamensky Canada Inc.

101

Reference5.8

www.pamensky.com

Direct On-Line Starter Sizing GuidePESW

Motor PESW Direct On-Line Starter Part Number


1

3600 143T 208-230/460 & 575V PESW-9V24AX-R26 PESW-9V47AX-R24 PESW-9V56AX-R24




1.5





2





3

3600 W182T 208-230/460 & 575V PESW-9V24AX-R29 PESW-9V47AX-R27 PESW-9V56AX-R26

1800 W182T 208-230/460 & 575V PESW-9V24AX-R29 PESW-9V47AX-R27 PESW-9V56AX-R26



5





7.5





10





15





20





25

3600 284TS 208-230/460 & 575V PESW-80V24AX-R41 PESW-40V47AX-R35 PESW-32V56AX-R34




30




900 364/5T 208-230/460 & 575V PESW-95V24AX-R43 PESW-50V47AX-R38 PESW-50V56AX-R36

40





50

3600 326TS 208-230/460 & 575V PESW-80V47AX-R41 PESW-65V56AX-R39

1800 326T 208-230/460 & 575V PESW-80V47AX-R41 PESW-65V56AX-R39

1200 364/5T 208-230/460 & 575V PESW-80V47AX-R41 PESW-65V56AX-R39


101

Reference 5.9

www.pamensky.com

Direct On-Line Starter Sizing GuidePESW

Motor PESW Direct On-Line Starter Part Number


60

3600 364/5TS 208-230/460 & 575V PESW-95V47AX-R43 PESW-80V56AX-R41




75

3600 364/5TS 208-230/460 & 575V PESW-105V47AX-R44 PESW-95V56AX-R43




Notes: This chart is designed as a guide only. For specifi c sizing please contact V.J. Pamensky Canada Inc.

101

Reference5.10

www.pamensky.com

Soft Starter Sizing GuideSSW 06

Motor SSW 06 Soft Starter Part Number


1

3600 143T 208-230/460 & 575V SSW060010T2257ESZ

1800 143T 208-230/460 & 575V SSW060010T2257ESZ

1200 145T 208-230/460 & 575V SSW060010T2257ESZ

900 182T 208-230/460 & 575V SSW060010T2257ESZ

1.5

3600 143T 208-230/460 & 575V SSW060010T2257ESZ

1800 145T 208-230/460 & 575V SSW060010T2257ESZ

1200 182T 208-230/460 & 575V SSW060010T2257ESZ

900 184T 208-230/460 & 575V SSW060010T2257ESZ

2

3600 145T 208-230/460 & 575V SSW060010T2257ESZ

1800 145T 208-230/460 & 575V SSW060010T2257ESZ

1200 184T 208-230/460 & 575V SSW060010T2257ESZ

900 213T 208-230/460 & 575V SSW060010T2257ESZ

3

3600 W182T 208-230/460 & 575V SSW060010T2257ESZ SSW060010T2257ESZ SSW060010T5257ESZ

1800 W182T 208-230/460 & 575V SSW060010T2257ESZ SSW060010T2257ESZ SSW060010T5257ESZ

1200 213T 208-230/460 & 575V SSW060010T2257ESZ SSW060010T2257ESZ SSW060010T5257ESZ


5





7.5





10





15





20





25

3600 284TS 208-230/460 & 575V SSW060085T2257ESZ SSW060045T2257ESZ SSW060030T5257ESZ




30




900 364/5T 208-230/460 & 575V SSW060085T2257ESZ SSW060045T2257ESZ SSW060030T5257ESZ

40





50





101

Reference 5.11

www.pamensky.com




60

3600 364/5TS 208-230/460 & 575V SSW060170T2257ESZ SSW060085T2257ESZ SSW060060T5257ESZ




75





100





125

3600 444/5TS 460 & 575V SSW060312T2257ESZ SSW060170T2257ESZ SSW060130T5257ESZ

1800 444/5T 460 & 575V SSW060312T2257ESZ SSW060170T2257ESZ SSW060130T5257ESZ



150

3600 445TS 460 & 575V SSW060365T2257ESZ SSW060205T2257ESZ SSW060170T5257ESZ

1800 445T 460 & 575V SSW060365T2257ESZ SSW060205T2257ESZ SSW060170T5257ESZ



200





250





300

3600 586/7TS 460 & 575V SSW060820T2257ESZ SSW060365T2257ESZ SSW060312T5257ESZ





101

Reference5.12

www.pamensky.com




3

3600 W182T 208-230/460 & 575V SSW070017T5SZ

1800 W182T 208-230/460 & 575V SSW070017T5SZ

1200 213T 208-230/460 & 575V SSW070017T5SZ

900 215T 208-230/460 & 575V SSW070017T5SZ

5

3600 184T 208-230/460 & 575V SSW070017T5SZ SSW070017T5SZ SSW070017T5SZ




7.5





10





15





20





25

3600 284TS 208-230/460 & 575V SSW070085T5SZ SSW070045T5SZ SSW070030T5SZ




30




900 364/5T 208-230/460 & 575V SSW070085T5SZ SSW070045T5SZ SSW070030T5SZ

40





50





60

3600 364/5TS 208-230/460 & 575V SSW070171T5SZ SSW070085T5SZ SSW070061T5SZ




75

3600 364/5TS 208-230/460 & 575V SSW070200T5SZ SSW070130T5SZ SSW070085T5SZ




100

3600 404/5TS 208-230/460 & 575V SSW070255T5SH1Z SSW070130T5SZ SSW070130T5SZ

1800 404/5T 208-230/460 & 575V SSW070255T5SH1Z SSW070130T5SZ SSW070130T5SZ



101

Reference 5.13

www.pamensky.com




125

3600 444/5TS 460 & 575V SSW070312T5SH1Z SSW070171T5SZ SSW070130T5SZ

1800 444/5T 460 & 575V SSW070312T5SH1Z SSW070171T5SZ SSW070130T5SZ



150

3600 445TS 460 & 575V SSW070365T5SH1Z SSW070200T5SZ SSW070171T5SZ

1800 445T 460 & 575V SSW070365T5SH1Z SSW070200T5SZ SSW070171T5SZ

1200 447T 460 & 575V SSW070412T5SH1Z SSW070200T5SZ SSW070171T5SZ


200

3600 447TS 460 & 575V SSW070255T5SH1Z SSW070200T5SZ

1800 447T 460 & 575V SSW070255T5SH1Z SSW070200T5SZ



250

3600 447TS 460 & 575V SSW070312T5SH1Z SSW070255T5SH1Z

1800 447T 460 & 575V SSW070312T5SH1Z SSW070255T5SH1Z

1200 586/7T 460 & 575V SSW070312T5SH1Z SSW070255T5SH1Z


300

3600 586/7TS 460 & 575V SSW070365T5SH1Z SSW070312T5SH1Z





automation products catalog

Documents