automation & control - home - capitaltristate...

Automation & Control

Training Catalog

www.capitaltristate.com

Automation & Control Course Descriptions

These courses are offered on an on-demand basis. If you are interested in any of these courses, please contact Ed Halavick at 301-302-8598 or [email protected]


ETHERNET 101FreeLunch and learn at CapitalTristate facility. This 3 hour free seminar covers the following topics:• Basic Hardware Overview • How to Configure and IP Address• Wireless Router Setup • Basic Troubleshooting Methods

SCHNEIDER PLC OVERVIEWFreeLunch and learn at CapitalTristate facility. This 3 hour free seminar compares the features and benefits, and discusses basic applications of the Quantum, Premium, Momentum, Twido, and the new M340 PLC families.

SENSOR TECHNOLOGY 101FreeLunch and learn at CapitalTristate facility. This 3 hour free seminar focuses on the different sensing technologies and basic applications of the different types of sensors. Sensor technologies covered include, inductive, capacitive, photoelectric, ultrasonic, and limit switches.• Features and benefits • Applications• Hands-on demo’s

DRIVES 101FreeLunch and learn at CapitalTristate facility. This 3 hour free seminar discusses the features, benefits and basic applications of the open and enclosed Telemecanique/ Square D variable frequency drive offerings.• How does a motor work? • How does a VFD work?• Overview of the SQD drives • Basic setup of a drive offering and application • PowerSuite software introduction selection

CONCEPT LEVEL 1 PROGRAMMINGTuition $550.00 per personInstructor-led course. This 2 day course provides the participant with the skills required to develop a system configuration and a program on one of the following hardware platforms: Quantum Automation Series or Momentum Series. Programming techniques range from basic programming functions through arithmetic operations and block moves using discrete I/O as well as register and analog I/O. This course is taught using the latest version of theConcept programming package. Only the Concept features necessary for the student to complete the tasks described above are covered in this course.

After completing this course, participants will be able to:• Evaluate an application for a programmable controller• Select, connect and configure the appropriate MODICON controller and system hardware (Quantum or Momentum Series) for a given application• Configure the controller of choice for a program• Write, test, debug and optimize a MODICON PLC program using basic programming functions, arithmetic and block moves to control several real world applications• Create, download, verify and document and MODICON PLC program

CONCEPT LEVEL 2 PROGRAMMINGTuition $550.00 per personInstructor-led course. This two-day course provides the participant with the skills required to perform program development with one of the following hardware platforms Quantum Automation Series or Momentum. Using the latest Concept programming package, the student will have an opportunity, through hands-on and written practice exercises, to implement what is presented in the classroom. Programming for specific applications and use of advanced techniques are emphasized.

After completing this course, participants will be able to:• Configure Quantum Automation Series or Momentum Series system to use the various compatible I/O series modules• Use IBM-compatible computer and Concept to create advanced control programs• Develop advanced math function programs• Manipulate data with Word and Table Move Functions: Sequencer, Register to Table; Table to Register; Table to Table; Block Move, Table to Block; Block to Table, Search; First In, First Out, Test, Compare; Indirect Block Read; Indirect Block Write• Develop Matrix Function programs; And, Or, XOR, Complement; Compare, Extended Memory Read and Write• Develop Subroutine programs using: Jump to Subroutine, Label, and Return• Insert Diagnostic functions into the program: Stat Block and DIO Health• Optimize the running of the program through the use of the Segment Scheduler

PROWORX NXT LEVEL 1 PROGRAMMINGTuition $550.00 per personInstructor-led course. This 2-day course provides the participant with the skills required to develop a system configuration and a program on one of the following hardware platforms: Quantum Automation Series or Momentum. Programming techniques range from basic programming functions through arithmetic operations and block moves using discrete I/O as well as register and analog I/O. This course is taught using the latest version of the ProWORX NxT programming package.

After completing this course, participants will be able to:• Evaluate an application for a programmable controller• Select, connect and configure the appropriate MODICON controller and system hardware (Quantum or Momentum) for a given application• Configure the controller of choice for a program• Write, test, debug and optimize a MODICON PLC program using basic programming functions, arithmetic and block moves to control several real world applications• Create, download, verify and document and MODICON PLC program

PROWORX NXT LEVEL 2 PROGRAMMINGTuition $550.00 per personInstructor-led course. This two-day course provides the participant with the skills required to perform program development with one of the following hardware platforms: Quantum Automation Series or Momentum. Using the latest ProWORX NxT programming package, the student will have an opportunity, through hands-on and written practice exercises, to implement what is presented in the classroom. Programming for specific applications and use of advanced techniques are emphasized.

After completing this course, participants will be able to:• Configure a MODICON programmable logic control system to use the various compatible I/O series modules• Use IBM-compatible computer and ProWORX Nxt to create advanced control programs• Develop advanced math function programs• Manipulate data with Word and Table Move Functions: Sequencer, Register to Table; Table to Register; Table to Table; Block Move, Table to Block; Block to Table, Search; First In, First Out, Test, Compare; Indirect Block Read; Indirect Block Write• Develop Matrix Function programs; And, Or, XOR, Complement; Compare, Extended Memory Read and Write• Develop Subroutine programs using: Jump to Subroutine, Label, and Return• Insert Diagnostic functions into the program: Status Block and DIO Health• Optimize the running of the program through the use of the Segment Scheduler




PROWORX 32 LEVEL 1 PROGRAMMINGTuition $550.00 per personInstructor-led course. This 2-day course provides the participant with the skills required to develop a system configuration and a program on one of the following hardware platforms: QUANTUM Automation Series or 984 Momentum. Programming techniques range from basic programming functions through arithmetic operations and block moves using discrete I/O as well as register and analog I/O. This course is taught using the latest version of the ProWORX 32 programming package. Only the ProWORX 32 features necessary for the student to complete the tasks described above are covered in this course.

After completing this course, participants will be able to:• Evaluate an application for a programmable controller• Select, connect and configure the appropriate MODICON controller and system hardware (Quantum or Momentum) for a given application• Configure the controller of choice for a program• Write, test, debug and optimize a MODICON PLC program using basic programming functions, arithmetic and block moves to control several real world applications• Create, download, verify and document and MODICON PLC program

PROWORX 32 LEVEL 2 PROGRAMMINGTuition $550.00 per personInstructor-led course. This 2-day course provides the participant with the skills required to perform program development with one of the following hardware platforms: Quantum Automation Series or Momentum. Using the latest ProWORX 32 programming package, the student will have an opportunity, through hands-on and written practice exercises, to implement what is presented in the classroom. Programming for specific applications and use of advanced techniques are emphasized.

After completing this course, participants will be able to:• Use IBM-compatible computer and ProWORX 32 to create advanced control programs• Develop advanced math function programs• Manipulate data with Word and Table Move Functions: Sequencer, Register to Table; Table to Register; Table to Table; Block Move, Table to Block; Block to Table, Search; First In, First Out, Test, Compare; Indirect Block Read; Indirect Block Write• Develop Matrix Function programs; And, Or, XOR, Complement; Compare, Extended Memory Read and Write• Develop Subroutine programs using: Jump to Subroutine,Label, and Return• Insert Diagnostic functions into the program: Status Block and DIO Health

UNITY LEVEL 1 PROGRAMMINGTuition $500.00 per personInstructor-led course. This 2-day course provides the participant with the skills required to develop a system configuration and a program using Schneider Electric UNITY Software. The participant will configure a Quantum Series PLC using UNITY, set up a project and learn how to use the Function Block, Ladder Diagram, Structured Text, Instruction List, and Sequential Function Chart IEC Editors. Hands-on exercises will enhance the participant skill level of where to use the various IEC editors.

After completing this course, participants will be able to:• Define the different programming languages available within UNITY software• Configure the UNITY system preferences• Determine which executive file is correct for a given controller• Load the appropriate executive file into the controller using the Loader software• Describe the Scan Cycle of the controller when executing an IEC Project.

• Perform a configuration using UNITY software.• Create an I/O map using UNITY software.• Configure special drop characteristics and I/O module setup parameters• Download a configuration and I/O map to a controller or simulator.• Define the difference between data types• Use the Variable Editor to create and or delete Variables.• Use the Reference Data Editor to view and/or modify the values of variables in the Controller.• Use the Project Browser to create sections.• Locate, insert and connect Function Blocks in an FBD Section.• Create a program using Derived Function Block.• Program control logic using the Sequential Function Chart Editor.• Program, download and test logic using the LD Editor.• Program logic using the ST Editor.• Use the search tool to locate objects and trace signals through the program.• Identify the types of Derived Data Types• Create a Macro.• Insert a Macro into an existing project file.• Create a new user and assign rights.• Protect a Program or a DFB• Access the PLC Status information using UNITY.• Determine I/O Module Health using UNITY• Program Status Function Blocks.

TWIDO PROGRAMMABLE CONTROLLERTuition $500.00 per personInstructor-led course. This 1-day course provides the participant with the skills required to develop a system configuration and a program on the TWIDO plc. The TWIDO is Schneider Electric’s entry level plc, small in size but packed with power and flexibility. Programming techniques include ladder logic programming functions using discrete and analog inputs and outputs through arithmetic operations and basic communications. This course is taught using the latest version of the TwidoSoft or Twido Suite programming package.

After completing this course, participants will be able to:• Evaluate an application for a programmable controller• Select, connect and configure the appropriate TWIDO controller for a given application• Configure the controller of choice for a program• Write, test, debug and optimize a TwidoSoft plc program using basic programming functions and arithmetic to control several real world applications• Create, download, verify and document the program

ZELIO SMART RELAYTuition $275.00 per personInstructor-led course. This 1/2-day course provides the participant with the skills required to develop a system configuration and a program on the ZELIO Programmable Relay. The ZELIO is Schneider Electric’s solution for very small automation projects and replacement of hardwired relay and timer control systems. Programming techniques include ladder logic programming functions using discrete inputs and outputs, analog inputs, timers and counters. The class will also introduce Function Block Programming. The course is taught using the latest version of ZelioSoft software and the built in function keys on the Zelio.

After completing this course, participants will be able to:• Evaluate an application for a Zelio relay• Select, connect and configure the appropriate Zelio controller for a given application• Write, test, and debug a ZelioSoft plc program using basic programming functions and arithmetic to control several real world applications• Create, download, verify and document the program• Use ZelioSoft’s built-in simulator to test the program




ALTIVAR® AC DRIVES (ATV31 OR 71)Tuition $550.00 per personInstructor-led course. Upon completion of this 2-day course the student will have the skills to:• Understand basic AC motor operation• Start-up, maintenance, and troubleshoot the Altivar AC drive.• Identify the hardware components of the Altivar AC drive• Modify the parameters of the Altivar AC drive• Interpret diagnostic fault messages of the Altivar AC drive

Equipment:• Altivar AC drive simulator • Altivar AC drive Job Aid

Contents:• Configure the system parameters of the Altivar AC drive for the following applications: • Material handling • General use• Troubleshooting the Altivar • Communications AC drive system hardware • Wiring/installation• Drive options • Start-up and adjustments • Safety issues

M340 PROGRAMMING USING UNITY SOFTWARETuition $550.00 per personInstructor-led course. This 2-day course provides the participant with the skills required to develop a system configuration and a program using Schneider Electric UNITY Software. The participant will configure a M340 Series PLC using UNITY, set up a project and learn how to use the Function Block, Ladder Diagram, Structured Text, Instruction List, and Sequential Function Chart IEC Editors. Hands-on exercises will enhance the participant skill level of where to use the various IEC editors.

After completing this course, participants will be able to:• Define the different programming languages available within UNITY software• Configure the UNITY system preferences• Determine which executive file is correct for a given controller• Load the appropriate executive file into the controller using the Loader software• Describe the Scan Cycle of the controller when executing an IEC Project.

• Perform a configuration using UNITY software.• Create an I/O map using UNITY software.• Configure special drop characteristics and I/O module setup parameters• Download a configuration and I/O map to a controller or simulator.• Define the difference between data types• Use the Variable Editor to create and or delete Variables.• Use the Reference Data Editor to view and/or modify the values of variables in the Controller.• Use the Project Browser to create sections.• Locate, insert and connect Function Blocks in an FBD Section.• Create a program using Derived Function Block.• Program control logic using the Sequential Function Chart Editor.• Program, download and test logic using the LD Editor.• Program logic using the ST Editor.• Use the search tool to locate objects and trace signals through the program.• Identify the types of Derived Data Types• Create a Macro.• Insert a Macro into an existing project file.• Create a new user and assign rights.• Protect a Program or a DFB• Access the PLC Status information using UNITY.• Determine I/O Module Health using UNITY• Program Status Function Blocks.

ARC FLASH HAZARD NFPA 70ETuition call for quoteInstructor-led course. This 1/2-day course presents and overview of NFPA 70E and explains selected OSHA and 70E requirements relevant to arc flash safety and compliance.• Overview of arc flash hazards and changes in enforcement• Hazards of short circuit currents and understanding arc flash events• Electrical arcs and flash burns• Background of OSHA NFPA 70E, and IEEE-1584 standards• Company and personal liability• Key steps and comparing methods in arc flash hazard analysis• Addressing problems encountered in analysis and communicating findings• Personal Protective Equipment (PPE)

MISSION STATEMENTCapitalTristate Automation & Control is committed to customer excellence. We provide innovative and state of the art solutions that empower the customer to realize technologically advanced and cost effective results.

PROGRAMMING SERVICESCapitalTristate’s Automation team will assist customers with their programming needs. We provide expertise in various PLC languages.CapitalTristate Automation also offers archiving and uploading of programs for safe storage. Customers that need further in depthprogramming and application assistance can be referred to a qualified system integrator.

SYSTEM EVALUATIONCapitalTristate’s Automation team will perform

an inspection of your current hardware and software system. We then provide you with the most economical solution to upgrade your system to the latest automation solutions. Our evaluation will allow you to avoid the high cost and risk of using legacy, obsolete, or repaired parts.

START UP ASSISTANCECapitalTristate’s Automation team will assist you in programming and commissioning of Drives, and Soft Starts. Our certified drives experts will ensure proper equipment implementation and integration into your process.

PROJECT MANAGEMENTCapitalTristate’s Automation team is your single source provider. We help you manage your automation and control projects from

beginning to end. We offer access to the most innovative products and most reliable suppliers. Our commitment to your project allows us to support all of your Integrator, Panel Builder and OEM needs.

TRAININGBecause we understand how important it is to maximize your investment, CapitalTristate’s Automation team offers training on the latestproducts and technologies. Our goal is to enhance our customer’s knowledge of products and skills using state of the art demo equipment. We provide regularly scheduled training and customized classes for your needs. Call today for a list of scheduled training classes in your area.

SERVICES & SOLUTIONS

automation & control - home - capitaltristate...

Documents