auto mccbs 1113
DESCRIPTION
ProtekTRANSCRIPT
Enclosed MCCBs
Protek Electronics Tel: 01543 46 75 75 Fax: 01543 46 23 70 Email: [email protected] Web: www.protekuk.co.uk
Features� TP&N or Four Pole� Pad-lockable in the OFF position� 32A, 63A, 100A, 125A, 160A, *200A, *250A, *400A, *630A and *800A
� Detachable Neutral link� IP65 enclosure to CE EN 60529**� Powder coated steel finish RAL 7035� Removable top and bottom gland plates� Designed in the UK to BS EN 60439-3 1991� Built and tested in the UK to BS EN 60439 parts 1 & 2
*Adjustable current rating**See adjacent page Enclosure
Benefits� For use Indoor or outdoor� Ten current ratings with current adjustment on 200A devices and above
� Auxiliary contacts can be fitted to advice of breaker tripping� Shunt trip or under-voltage trips can be fitted when it is necessary to trip the breaker using an emergency stop button
� All MCCBs are fitted in enclosures that under normal circumstances do not require additional cable boxes but these can be supplied if required
� Can be used with Protek’s busbar chambers� Gland plates top and bottom� Can be ordered with right or left hand door opening (Standard is opening to right)
IP65 - NO fuses to replace3 year warranty
Note
MCFS0323 32A 16KA TP&N Enclosed MCCB 500 300 200
MCFS0633 63A 16KA TP&N Enclosed MCCB 500 300 200
MCSF1003 100A 16KA TP&N Enclosed MCCB 500 300 200
MCFS1253 125A 16KA TP&N Enclosed MCCB 500 300 200
MCFS1603 160A 16KA TP&N Enclosed MCCB 500 300 200
MCFS2003 200A 25KA TP&N Enclosed MCCB 500 400 200
MCFS2503 250A 25KA TP&N Enclosed MCCB 500 400 200
MCFS4003 400A 36KA TP&N Enclosed MCCB 700 500 250
MCFS5003 630A 50KA TP&N Enclosed MCCB 700 500 250
MCFS6303 800A 200KA TP&N Enclosed MCCB 1000 600 250
*Excludes handles
MCFS0324 32A 16KA Four Pole Enclosed MCCB 500 300 200
MCFS0634 63A 16KA Four Pole Enclosed MCCB 500 300 200
MCSF1004 100A 16KA Four Pole Enclosed MCCB 500 300 200
MCFS1254 125A 16KA Four Pole Enclosed MCCB 500 300 200
MCFS1604 160A 16KA Four Pole Enclosed MCCB 500 300 200
MCFS2004 200A 25KA Four Pole Enclosed MCCB 500 400 200
MCFS2504 250A 25KA Four Pole Enclosed MCCB 500 400 200
MCFS4004 400A 36KA Four Pole Enclosed MCCB 700 500 250
MCFS5004 630A 50KA Four Pole Enclosed MCCB 700 500 250
MCFS6304 800A 200KA Four Pole Enclosed MCCB 1000 600 250
*Excludes handles
Part Number
Enclosed MCCBs Three Pole
Description Height mm Width mm Depth* mm
Part Number
Enclosed MCCBs Four Pole
Description Height mm Width mm Depth* mm
Features� Mechanically and electronically interlocked 3/4 pole AC1 rated contactors. (AC1 - BS EN 60947-4-1)
� 'Zero volt' connection for remote generator start (N/O & N/C)
� Auxiliary power supply for Generator battery charging, mains/generator only
� Two position key switch for 'Automatic' and Generator 'Run'
� Supply lamps for visual status indication� All equipment housed in a sheet steel hinged lid enclosure
Enclosure� Technical characteristicsConformity with the CEI EN 62208, CEI EN 60439-1, IEC 61439-1-2
Standard
Degree of protection IP65 (CEI EN 60529) TYPE 12 (UL Standard)
Degree of mechanical strength IK10 blind door / IK09 glazed door (EC 62262)
Certifications
Type of material Metallic
Installation site Indoors
Fixing method Floor/Wall
Normal service conditions Ambient temperature from -5ºC to +40ºC
Atmospheric conditions - relative humidity 50% at 40ºC 90% at 20ºC
DescriptionAuto-Changeover panels are used when essential wherever power has to bemaintained. There are many instances when this is necessary. To ensure people’ssafety at work or in public spaces, maintain essential supplies to a vital processor hospitals/medical centres. A fast and efficient transfer of power from themain source to a secondary source is vital. This is where Protek’s range of Auto-Changeover panels come into their own.
Protek offers two types of Auto-Changeover panels. Mains to Mains where twoMains supplies are available or Mains to Generator where the secondary supplyis provided by a generator. These units are available in both single phase or threephase and in the case of the generator unit a battery charge supply is available.The single phase units are available in 40A to 160A whereas the three phaseunits are available in current ratings from 40A to 250A.
Auto-Changeover switches
SCO0402AMM 40 2 500x400x200
SCO0602AMM 60 2 500x400x200
SCO0802AMM 80 2 600x400x200
SCO1002AMM 100 2 600x400x200
SCO1252AMM 125 2 600x400x200
SCO1602AMM 160 2 800x600x300
SCO0404AMM 40 4 500x400x200
SCO0604AMM 60 4 500x400x200
SCO0804AMM 80 4 600x400x200
SCO1004AMM 100 4 600x400x200
SCO1254AMM 125 4 600x400x200
SCO1604AMM 160 4 800x600x300
SCO2004AMM 200 4 1000x600x300
SCO2504AMM 250 4 1200x800x300
SCO0402AMG 40 2 500x400x200
SCO0602AMG 60 2 500x400x200
SCO0802AMG 80 2 600x400x200
SCO1002AMG 100 2 600x400x200
SCO1252AMG 125 2 600x400x200
SCO1602AMG 160 2 800x600x300
SCO0404AMG 40 4 500x400x200
SCO0604AMG 60 4 500x400x200
SCO0804AMG 80 4 600x400x200
SCO1004AMG 100 4 600x400x200
SCO1254AMG 125 4 600x400x200
SCO1604AMG 160 4 800x600x300
SCO2004AMG 200 4 1000x600x300
SCO2504AMG 250 4 1200x800x300
II 3 G D
Protek Electronics Twitter - @protekuk Facebook - facebook.com/Protek.Electronics
Part Number
Single Phase Mains to Mains
Current / Amps No. of Poles Dimensions mm Part Number
Single Phase Mains to Generator
Current / Amps No. of Poles Dimensions mm
Part Number
Three Phase Mains to Mains
Current / Amps No. of Poles Dimensions mm Part Number
Three Phase Mains to Generator
Current No. of Poles Dimensions mm
Residential
Consumer Units:Insulated IP40 & 65,
Metal - Flush & Surface,
Garage & Shower Units
Devices:Isolators, MCBs, RCDs,
RCBOs, MCCBs,
Surge Arresters,
Bell Transformers,
Contactorsand Timers
Fusegear:IP41 - Isolators, Fuse
Switches & Change-over
Switches, Busbar
Chambers
IP65 - Plastic Isolators
AC & DC, IP65 - Metal
Isolators, Fuse switches
and Change-over Switches
MCB Boards:Pan Assemblies, A Boards,
B Boards, Meter Kits,
Meter Packs, Split Load
Boards, Isolator, RCD,
MCCB and RCBO
incomers, Type 2 Surge
MCCB Panel
Boards:Easy Fit Panel Board,
Standard Boards
250A to 800A
Panel Boards, Enclosed
MCCBs & RCBOs
Solar PV -
Energy Saving:ALECTRA Plug and Play
Control Units, AC & DC
Isolators, MID approved
meters, Solar PV ready
consumer units, Combined
garage & MID Meter unit
IP65 String Combiners
Design, Develop and Innovate - we call it - The Art of Circuit Protection
Protek Electronics LimitedPheonix House, Phoenix Road, Hawks Green, Cannock, Staffordshire, WS11 7LR
T: 01543 467575 F: 01543 462370 E-Mail [email protected] www.protekuk.co.uk
MCCB 11.13
© Protek Electronics Limited 2013. All trade names, marks and references are the property of Protek Electronics Limited. Protek employs a policy of continual product development and as such actual products maydiffer from those depicted as may their colour or tone. All prices and descriptions are correct at time of going to print. Protek reserves the right to adjust pricing and or removefrom sale any item featured within without prior notification. Artwork © Protek Electronics Limited 2013.
FusegearProtek offer a comprehensive range of fusegear for the UK marketwhether you require single phase or three phase plastic or metal in IP31,IP40 or IP65. Our single phase fuse switches are ideal for flats and apartments. Our IP40 range is suitable for industrial applications (10A to 400A and when conditions require it we have a full range ofIP65 metal isolators, fuse switches and changeover switches up to 630A.
For more details see brochure number FG000114
DevicesProtek’s range of mcbs and RCBOs is second to none. We developed our10KArange of mcbs 10 years ago and in 2010 we introduced to the UKthe world’s smallest 10KA RCBO developed here in the UK at our Cannock HQ. It is based on our proven range of 10KA mcbs and providescontractors with more space in both consumer units and three phasemcb boards.
To complement our distribution switchgear we have a range of commandand control equipment which now includes Protek-Dehn surge arresters.
For more details see brochure number DE000114
MCB BoardsProtek has listened to our customers and as a result we have launchedTitan II into the UK Market in 2011. We believe it to be one of the mostversatile boards on sale in the UK at this moment In time. As it is ofmodular design we are able to offer an assortment of incomers, metering options and the ability to build on site split load boards formetering or simply RCD protection very easily.
For more details see brochure number MB00114
MCCB Panel BoardsProtek has three ranges of MCCB panel boards.1) Our Mini-Panel Board which comes with a 160A TP MCCB as an
incomer and 3, 5 or 7 TP MCCB outgoing ways.2) Our standard MCCB Panel Board is available with either 400A or
800A Busbars and 4,6,8,12 or 16 TP outgoing ways.3) Wall or floor standing with incomers up to 1600A multiple stacks
and the ability to have PFC fitted within the board.
For more details see brochure number MC00114
��������������������������������� ������������������������������������������������
�������������
����� ������
����������������������������������������������������������������������������������
���������0%2(3
"�: ��� !�#�� �!���������� !���"!���������
!������� � �������������� ��������%+-�3%-)3�1204),5,�'0�5,����777�1204),5,�'0�5,
���3�� ������������������526)3�������9�����3�� �������������40���������.��40����.���9������3�� �����������������40�������������526)3 1%') %6)2��������������40�������������526)3��9���30-%4023�� ������ �����40������!��02��052��0-)
�$%8�!����&0%2(�'�7������+/'0.+/*�,+4
�$%8�!�����0%2(�'�7��������+/'0.+/*�,+4
������������������������������������������������� ��!�����!�����"""���� ��!�����!�
�������� ������� �����