audio technica camera & video catalog

CAMERA & VIDEO MICROPHONE COLLECTION

Welcome to the world of Audio-Technica Microphones,

For nearly 50 years, Audio-Technica has been devoted to the design, manufacture,

marketing and distribution of problem-solving professional audio equipment.

Winner of numerous industry awards, Audio-Technica manufactures products that

set quality, durability and price/performance standards for live sound tours,

broadcast and recording studios, corporate and government facilities,

house-of-worship venues, and more.

Compiled in this catalogue is a selection of professional microphones designed

for casual or professional videographers and photographers alike, whether being used

in rugged outdoor conditions, adding superb audio quality to a special occasion

or providing clear, accurate dialogue for that important interview.

summary

CAMERA MOUNTABLE MICROPHONES

PRO 24 6

ATR Series 7

Shotgun Microphones 8 - 9

Headsets 9

REPORTER MICROPHONES

Stereo Microphones 12 - 13

Cardioid and Omnidirectional Microphones 14 - 15

UHF WIRELESS SYSTEMS

Receivers 18

Transmitters 19

Lavalier Microphones 20 - 21

Technical Specifications 22 - 24

CAMERA MOUNTABLE MICROPHONES

A selection of professional microphones offering accurate, clear and intelligible

sound at short, medium and long distances.

Also included is a range of accessories making it possible to attach the

microphones to the majority of still and video cameras.

6

PRO24-CMFStereo condenser microphone

The PRO24-CMF camcorder microphone is a lightweight, compact stereo condenser ideal for digitalrecording with high-fidelity stereo sound..

● Stereo microphone designed to be mounted on a camcorder or digital SLR camera equipped with an

accessory shoe and stereo microphone input.

● Lightweight, portable design with rugged all-metal construction

● Pair of cardioid condenser elements provides spatial impact and high-fidelity stereo sound image

● Battery-free operation when used with recording devices that provide plug-in power at the mic input.

● On/off switch for convenient operation

● Includes camera-mount, windscreen, battery and protective pouch

● Permanently attached 6”-12” coiled cable with right-angle moulded 3.5 mm stereo mini plug

PRO24Stereo condenser microphone

● Designed for a wide range of stereo applications, including field recording,

video production and studio use● Affordable, high-quality stereo pickup in a single microphone● Pair of cardioid elements in X-Y configuration provides the spatial impact

and realism of a live sound field● Battery-free operation when used with recording devices that provide plug-in power

at the mic input● 6’ (1.8 m) cable permanently attached to microphone

7

ATR6250Stereo condenser microphone

● High-quality stereo pickup in a single mic

● Plugs into your video camera or audio recorder

● Includes short camera cable & long recording cable

● Accessories include professional camera mount, foam windscreen, AA battery,

3.5mm and 6.3mm mono adapters and an interchangeable mic stand base

ATR6550Telemike™ shotgun microphone

● Specifically designed for video cameras

● 3.5 mm connector plugs directly into your video camera

● Two range settings: "Normal" for close & medium-distance;

“Tele” for long-distance

● Elimination of unwanted ambient sounds

● Includes camera-mount, stand clamp, foam windscreen, battery

and 1/4” adapter

ATR3350Miniature omnidirectional tie clip microphone

● Newscaster-style miniature mic is perfect for video use

● Ideal for interviews at short or medium distances

● Integrated 6 m (20’) cable with 3.5 mm mini-plug for use with most cameras

● Omnidirectional pickup pattern offers full 360 coverage

● Includes tie clip, battery, foam windscreen, and 1/4” adapter

8

AT897Line + gradient shotgun microphone

● Designed for video production and broadcast (ENG/EFP) audio acquisition

● Short length (11”) ensures mic stays out of the shot – even when used with compact digital cameras

● Smooth, natural-sounding on-axis audio quality

● Provides the narrow acceptance angle desirable for long-distance sound pickup

● Operates on battery or phantom power

● Switchable low-frequency roll-off

● Integral 3-pin XLRM-type output connecter

● Comes with windscreen and clip

XLRM3

AT897-Z (AT897 + BPZ-M)AT897 shotgun microphone

with the Soft-Zep BPZ-M including windscreen

and pistol grip (Length 310mm)

AT897-W (AT897 + BPW-180)AT897 shotgun microphone

with the BPW-180 windshield (Length 180mm)

AT897-F (AT897 + BPF-175)AT897 shotgun microphone

with the BPF-175 fur sock (Length 175mm)

9

AT875R178mm line + gradient condenser microphone

● Designed for video production and broadcast (ENG/EFP) audio acquisition

● Extremely short length (under 7”) ideal for use with compact digital cameras

● Provides the narrow acceptance angle desirable for long-distance sound pickup

● Excellent sound rejection from the sides and rear of mic

● Operates on phantom power only

XLRM3

BPHS-1Broadcast stereo headset

Created especially for on-air news & sports broadcasting, announcing & interviews, this rugged stereo headset

offers natural, highly intelligible and focused vocal reproduction, closed-back circumaural (around-the-ear) ear cups

to seal out background noise, and a high-output dynamic microphone mounted on a flexible gooseneck boom.

● Microphone features polar pattern and frequency response tailored for natural, highly intelligible vocal

reproduction

● Closed-back circumaural ear cups help seal out crowd noise and other background distractions

● Neodymium magnets in microphone and headphones for high output level & detailed sound reproduction

● Rugged design with user-replaceable cable and ear pads

● Cardioid pickup pattern of the dynamic microphone rejects off-axis sounds

● Boom-mounted microphone can be positioned on the left or right side

● Adjustable cushioned headband and lightweight design for long-wearing comfort

● Detachable cable (BPCB1) terminates in a 3-pin XLRM-type connector for the microphone and a ¼” 3-conductor

for the headphones

XLRM3

REPORTER MICROPHONES

The ideal choice for field reporting and interviews,

Audio-Technica’s range of reporter microphones deliver clear,

intelligible audio reproduction and reliability in high pressure situations

that have to be right first time.

12

AT8022-F (AT8022 + BPF-2)AT8022 stereo microphone with BPF-2 Fur Sock (Length 125 mm)

XLRM5

AT8022X/Y stereo microphone

● Innovative capsule configuration produces accurate stereo image in smaller housing

● Compact, lightweight design is perfect for video camera-mount use as well as

for stereo field recording, interviews and home recording

● Ideal for use with handheld digital recording devices

● Switchable low-frequency roll-off

● Operates on battery or phantom power - for use with pro or consumer equipment

13

BP4025X/Y stereo field recording microphone

● Large-diaphragm capsules offer pristine sound quality and exceptionally low noise

● Innovative coincident capsule configuration produces accurate stereo image

in smaller housing

● Compact, lightweight design is ideal for camera-mount use

● Phantom power operation - for use with professional equipment

● Includes one balanced cable (two 3-pin XLRM-type connectors at output)

XLRM5

BP4025-F (BP4025+BPF-2)BP4025 microphone with BPF-2 Fur Sock (Length 125 mm)

14

AT8033Cardioid condenser microphone

Ideal for general audio acquisition such as interviews, acoustic guitar, percussion, overheads,vocals and more, the AT8033 features high-SPL capability and wide frequency response. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, improvingisolation of desired sound source. The mic excels in both studio and stage applications. It operates on battery or phantom power.

XLRM3

XLRM3

AT8010Omnidirectional condenser microphone

Ideal for interviews, pickup of audience reaction, and musical events. The AT8010 features an omnidirectional polar pattern that provides maximum ambient pickup. The microphone provides an extremely smooth, extended response on- and off-axis. Operates on battery or phantom power.

15

AT8004Omnidirectional dynamic microphone

Audio-Technica’s AT8004 omnidirectional dynamic microphone is designed for on-location interviews and sports broadcasting. It offers exceptionally clearand natural reproduction and features internal shock mountings that minimizehandling and cable noise. An omnidirectional polar pattern is ideal for reproduction of surrounding ambience whilst its rugged housing with hardened-steel grille stands up to field use.

AT8004LOmnidirectional dynamic microphone with extended handle

Audio-Technica’s AT8004L is designed for on-location interviews/sports broadcasting. Its extended-length handle provides ample room for a microphone flag.

AT8004-W (AT8004+BPW-1)AT8004 microphone with BPW-1 windshield

AT8004L-W (AT8004L+BPW-1)AT8004L microphone with BPW-1 windshield

XLRM3

XLRM3

UHF WIRELESS SYSTEMS

Audio-Technica’s camera-mountable 1800 Series UHF wireless system

delivers portability and reliability for professional “Electronic News

Gatherers” and enthusiasts alike.

18

ATW-R1810Single channel True Diversity receiver

● Balanced output on receiver allows connection to a balanced microphone-

level input on camera, mixer or amplifier.

Accessories

BEC-AT1810Wireless receiver holder for the ATW-R1810

BEC-AT1820Wireless receiver holder for the ATW-R1820

BEC-HSA-VERTVertical hot-shoe mount for the ATW-R1810

SINGLE

ATW-R1820Dual channel True Diversity receiver

For simultaneous operation of two microphones, dual-channel 1800 wireless systems include the ATW-R1820 dual receiver with two completely independent receiver channels in a single unit. Dual balanced outputs enable signals to be mixed, or independentlyassigned to each output. Independent audio level controls provideflexible audio mixing and monitoring possibilities.

● Two completely independent receiver channels in a single unit,

for simultaneous operation of two microphones

● Two independent balanced outputs

1800 Series ENG wireless systemsWith UHF reception (996 frequencies user-selectable

in 25 kHz steps), Audio-Technica’s new 1800 Series

camera-mountable wireless microphone systems

provide extremely flexible, professional, and easy-

to-use portable wireless solutions for “Electronic

News Gathering”. The 1800 Series is available

in dual-channel and single-channel systems.

● Compact receiver is easy to mount on a camera● UHF reception with 996 frequencies selectable

in 25 kHz steps● Automatic frequency scanning for easy selection

of open channels● Tone Lock™ squelch system eliminates

interference when transmitter is off● Headphone monitor output with independent

level control● Battery fuel-level indicators on transmitters

and receiver● Soft-touch controls for easy frequency selection● True Diversity operation for resistance

to multi-path interference and dropouts● LCD frequency and battery status display

with backlight● Antenna and AF Peak LED indicators● Easy, user-friendly operation● Clear, natural sound quality● Powered by AA batteries

19

ATW-T1801 UniPak™ body-pack transmitter

Compatible with all HRS (4-pin) terminated Audio-Technica microphones.

ATW-T1802 Plug-on transmitter

Converts any wired handheld microphone into a wireless microphone

ATW-1826Dual channel UHF wireless system

ATW-R1820 Dual channel receiverATW-T1801 UniPak™ body-pack transmitter ATW-T1802 Plug-on transmitter


ATW-R1820 Dual channel receiverTwo ATW-T1801 UniPak ™ body-pack transmitters


ATW-R1820 Dual channel receiverTwo ATW-T1802 Plug-on transmitters

ATW-1814Single channel UHF wireless system

ATW-R1810 Single channel receiverATW-T1801 UniPak ™ body-pack transmitter

ATW-1812Single channel UHF wireless system

ATW-R1810 Single channel receiverATW-T1802 Plug-on transmitter

XLRM3

20

AT898cWSub-miniature cardioid condenser microphone

Designed to be worn as a lavalier or hidden in clothing, Audio-Technica’s discreet-designcardioid AT898 offers maximum intelligibility, accurate voice reproduction andunobtrusive appearance for use in houses of worship, broadcast studios, theatres, etc. Its switchable low-frequency roll-off reduces sensitivity to popping.

AT899cWSubminiature omnidirectional condenser microphone

Audio-Technica’s omnidirectional AT899 is engineered for intelligible,accurate voice reproduction. Its low-profile design (a mere 5 mm indiameter) assures minimum visibility. The mic may be worn as a lavalierand is easily hidden in clothing or hair.

Includes AT899AK accessory kit.

AT899cW-THBeige version of AT899cW. Includes AT899AK-TH accessory kit.

AT899AKAccessory Kit for AT898cW and AT899cW.Comprising a pair of clothes, a pair of pliers, amagnet base, three single holders, two doublesupports, two guards and two windscreens.

AT899AK-THBeige version of the AT899AK accessory kit.

21

AT829cWOmnidirectional condenser lavalier microphone

Cardioid condenser lavalier microphoneterminated with locking 4-pin connectorfor Audio-Technica UniPak® body-packwireless transmitters.

AT831aWCardioid condenser lavalier microphone

This clip-on lavalier mic provides crisp, full-sounding

voice pickup. The AT831aW has excellent gain before

feedback and suppression of background noise.

Comes with an AT8116 windshield and AT8419clothing clip.

ES943cW/CCardioid condenser lavalier microphone with interchangeable capsules

The ES943C is intended to be worn on the clothing for excellent, unobtrusive soundpickup. The microphone’s wide-range capability ensures clean, accurate reproduction withhigh intelligibility for speakers, singers and other performers. Its low-profile elementprovides a uniform cardioid polar pattern with 120º acceptance angle. ● Small size and excellent response provide crisp, full-sounding voice pickup

● Designed for quality sound reinforcement, professional recording, television

and other demanding sound pickup applications

● Available interchangeable elements permit angle of acceptance from 100º to 360º

● UniGuard® RFI-shielding technology offers outstanding rejection

of radio frequency interference (RFI)

AT803aWOmnidirectional condenser lavalier microphone

The AT803 provides excellent yet unobtrusive sound pickup for lecturers and stage/TV performers. Designed for clip-on lavalier and musical instrument use. ● High intelligibility for lecturers and stage/TV performers ● Provides excellent sound while remaining unobtrusive

ATR35cWOmnidirectional condenser lavalier microphone

Audio-Technica’s omnidirectional ATR35cWlavalier is engineered for intelligible, accurate voice reproduction.

This high-quality condenser is ideal for video use, with its low-profile design assuring minimum visibility.

PRO24 PRO24-CMFTYPE Closed-back Dynamic (Headphone)

HEADPHONE DRIVER 40 mm, neodymium magnet, copper-clad aluminum wire voice coil

VOICE COIL Copper-clad aluminum wire

MICROPHONE ELEMENT Dynamic

MICROPHONE POLAR PATTERN Cardioid

FREQUENCY RESPONSE Microphone: 40-20,000 Hz

Headphone: 20-20,000 Hz

OPEN CIRCUIT SENSITIVITY Microphone: – 57 dB (1.4 mV) re 1V at 1 Pa

Headphone: 100 dB

MAXIMUM INPUT POWER 1,600 mW at 1 kHz

IMPEDANCE Microphone: 560Ω

Headphone: 65Ω

WEIGHT 264 g

DIMENSIONS 82.0 mm wide (earcup); 46.0 mm wide (headband); 180.1 mm long

(boom), microphone extended; 24.0 mm diameter (microphone)

CABLE 3.3 m long with 8-pin connector at headset end;

3-pin XLRM-type connector (microphone)

and 6.3 mm phone plug (headphone) outputs

ACCESSORIES FURNISHED 3 windscreens; spare connector screw

*1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL

BPHS-1

ELEMENT Fixed-charge back plate, permanently polarized condenser Fixed-charge back plate, permanently polarized condenser

POLAR PATTERN Line + gradient Line + gradient

FREQUENCY RESPONSE 20-20,000 Hz 90-20,000 Hz

LOW FREQUENCY ROLL OFF 80 Hz, 12 dB/octave –

OPEN CIRCUIT SENSITIVITY Phantom: –40 dB (10.0 mV) re 1V at 1 Pa Battery: –41 dB (8.9 mV) re 1V at 1 Pa – 30 dB (31.6 mV) re 1v à 1 pa*

IMPEDANCE Phantom: 200 Ω - Battery: 300 Ω 100 Ω

MAX. INPUT SOUND LEVEL Phantom: 129 dB SPL, 1 kHz at 1% T.H.D. - Battery: 115 dB SPL, 1 kHz at 1% T.H.D. 127 dB SPL, 1 khz à 1% T.H.D.

DYNAMIC RANGE Phantom: 112 dB, 1 kHz at Max SPL - Battery: 98 dB, 1 kHz at Max SPL 107 dB, 1 kHz at Max SPL

SIGNAL TO NOISE RATIO 77 dB, 1 kHz at 1 Pa 74 dB, 1 kHz at 1 Pa

SWITCH Flat, roll-off (recessed) –

BATTERY TYPE 1.5V AA/UM3 - Battery Current Life: 0.4 mA / 1200 hours typical (alkaline) –

PHANTOM POWER REQ. 11-52V DC, 2 mA typical 11-52V DC, 2 mA typical

WEIGHT 145 grams 80 grams

DIMENSIONS 279.0 mm long, 21.0 mm diameter 175.0 mm long, 21.0 mm diameter

OUTPUT CONNECTOR Integral 3-pin XLRM-type Integral 3-pin XLRM-type

ACCESSORIES FURNISHED AT8405a stand clamp for 5/8”-27 threaded stands; AT8134 windscreen; AT8405a stand clamp for 5/8”-27 threaded stands; 5/8”-27

battery; 5/8"-27 to 3/8"-16 threaded adapter; protective carrying case to 3/8”-16 threaded adapter; windscreen; soft protective pouch

AT897 AT875R

ELEMENTS Stereo condenser Condenser CondenserPOLAR PATTERN Dual cardioid Normal: Cardioid - Tele: Supercardioid

FREQUENCY RESPONSE 70 – 18,000 Hz 70 – 18,000 Hz 50 – 18,000 HzOPEN CIRCUIT SENSITIVITY – 50 dB Normal: – 56 dB - Tele: – 45 dB – 54 dB

IMPEDANCE 600 Ω Normal: 1,000 Ω - Tele: 2,200 Ω 1,000 ΩBATTERY TYPE 1.5V AA 1.5V AA 1.5V LR44-type

ACCESSORIES FURNISHED Camera mount; interchangeable mic-stand base; Camera mount; mic. stand clamp; foam Tie clip; battery; foam windscreen;foam windscreen; 2 mini jack adapters; AA battery windscreen; 6.3 mm adapter plug; AA battery 6.3 mm adapter plug

WEIGHT (without cable) 80 grams 113 grams 5.5 grams

ELEMENTS Fixed charge back plate permanently polarized condenser Fixed charge back plate permanently polarized condenser

POLAR PATTERN X/Y stereo X/Y stereo


OPEN CIRCUIT SENSITIVITY – 50 dB (3.1 mV), re 1V at 1 Pa* – 50 dB (3.1 mV), re 1V at 1 Pa*

IMPEDANCE 600 Ω 600 Ω

MAX. INPUT SOUND LEVEL 119 dB SPL, 1 kHz at 1% T.H.D. 119 dB SPL, 1 kHz at 1% T.H.D.

DYNAMIC RANGE (typical) 82 dB, 1kHz at max. SPL 82 dB, 1kHz at max. SPL

SIGNAL-TO-NOISE RATIO 57 dB, 1 kHz at 1 Pa* 57 dB, 1 kHz at 1 Pa*

BATTERY TYPE / LIFE 1.5 V LR44 / 200 hours typical 1.5 V LR44 / 200 hours typical

SWITCH On-off On-off

WEIGHT 111 grams 111 gramsMICROPHONE DIMENSIONS 116.5 mm long, 21.0 mm max. body diameter 116.5 mm long, 21.0 mm max. body diameter

OUTPUT CONNECTOR 3.5 mm stereo mini-plug 3.5 mm stereo mini-plug

CABLE 1.8 m, permanently attached with 3.5 mm stereo plug 152.4 mm - 304.8 mm permanently attached coiled cable

with right angle molded 3.5 mm stereo plug

ACCESSORIES FURNISHED AT8405a stand clamp for 5/8”-27 threaded stands; 5/8”-27 to 3/8” AT8472 Video-camera shoe mount; LR44 battery;

-16 threaded adapter; windscreen; soft protective pouch - LR44 battery windscreen; soft protective pouch; AT8123 windjammer

ATR6250 ATR6550 ATR3350

TECHNICAL SPECIFICATIONS I CAMERA MOUNTABLE MICROPHONES22

ELEMENT: Fixed-charge back plate, permanently polarized condenser Fixed-charge back plate, permanently polarized condenser Dynamic Dynamic

POLAR PATTERN Cardioid Omnidirectional Omnidirectional Omnidirectional

FREQUENCY RESPONSE 30-20,000 Hz 20-20,000 Hz 80-16,000 Hz 80-16,000 Hz

LOW FREQUENCY ROLL OFF 80 Hz, 12 dB/Octave 80 Hz, 12 dB/Octave

OPEN CIRCUIT SENSITIVITY Phantom: – 44 dB (6.3 mV) re 1V at 1 Pa Phantom: – 44 dB (6.3 mV) re 1V at 1 Pa – 51 dB (2.8 mV) re 1V at 1 Pa – 51 dB (2.8 mV) re 1V at 1 Pa

Battery: – 45 dB (5.6 mV) re 1V at 1 Pa Battery: – 45 dB (5.6 mV) re 1V at 1 Pa

IMPEDANCE Phantom: 250Ω - Battery: 300Ω Phantom: 250Ω - Battery: 300Ω 300Ω 300Ω

MAXIMUM INPUT SOUND LEVEL Phantom: 137 dB SPL, 1 kHz at 1% T.H.D. Phantom: 137 dB SPL, 1 kHz at 1% T.H.D.

Battery: 123 dB SPL, 1 kHz at 1% T.H.D. Battery: 123 dB SPL, 1 kHz at 1% T.H.D.


DYNAMIC RANGE Phantom: 113 dB, 1 kHz at Max SPL Phantom: 113 dB, 1 kHz at Max SPL

Battery: 99 dB, 1 kHz at Max SPL Battery: 99 dB, 1 kHz at Max SPL

PHANTOM POWER REQUIREMENTS 11-52V DC, 2 mA typical 11-52V DC, 2 mA typical

SWITCH Flat, roll-off –

WEIGHT (less accessories) 159 grams 165 grams 160 grams 215 grams

DIMENSIONS 194.2 mm long, 26.0 mm head diameter 178.0 mm long, 26.0 mm head diameter 150.0 mm long, 35.8 mm head diameter 150.0 mm long, 35.8 mm head diameter

OUTPUT CONNECTOR Integral 3-pin XLRM-type Integral 3-pin XLRM-type Integral 3-pin XLRM-type Integral 3-pin XLRM-type

ACCESSORIES FURNISHED AT8405a stand clamp for 5/8”-27 threaded stands; 5/8”-27 to 3/8”-16 AT8405a stand clamp for 5/8”-27 threaded stands; 5/8”-27 to 3/8”-16 AT8405a stand clamp for 5/8”-27 threaded stands; 5/8”-27 AT8405a stand clamp for 5/8”-27 threaded stands; 5/8”-27

threaded adapter; AT8136 windscreen; battery; soft protective pouch threaded adapter; AT8136 windscreen; battery; soft protective pouch to 3/8”-16 threaded adapter; soft protective pouch to 3/8”-16 threaded adapter; soft protective pouch

AT8033 AT8010 AT8004 AT8004L

ELEMENT Fixed-charge back plate permanently polarized condenser Fixed-charge back plate permanently polarized condenser

CHANNEL BALANCE < 2.5 dB < 2.5 dB

POLAR PATTERN X/Y Stereo X/Y Stereo


LOW FREQUENCY ROLL OFF 80 Hz, 12 dB/octave 80 Hz, 12 dB/octave

OPEN CIRCUIT SENSITIVITY Phantom: – 38 dB (12.5 mV) re 1V at 1 Pa - Battery: – 38 dB (12.5 mV) re 1V at 1 Pa Phantom: – 32 dB (25.1 mV) re 1V at 1 Pa

IMPEDANCE Phantom: 250Ω - Battery: 300Ω 170Ω

MAXIMUM INPUT SOUND LEVEL Phantom: 128 dB SPL, 1 kHz at 1% T.H.D. - Battery: 120 dB SPL, 1 kHz at 1% T.H.D. 145 dB SPL, 1 kHz at 1% T.H.D. - 155 dB SPL, with 10 dB pad (nominal)

DYNAMIC RANGE Phantom: 109 dB, 1 kHz at Max SPL - Battery: 101 dB, 1 kHz at Max SPL 131 dB, 1 kHz at Max SPL


PHANTOM POWER REQUIREMENTS 11-52V DC, 2 mA typical (each channel) 11-52V DC, 7 mA typical (both channels total)

BATTERY TYPE 1.5V AA/UM3

BATTERY CURRENT / LIFE 0.7 mA / 700 hours typical (alkaline)

SWITCH Battery On/Off; Flat, roll-off Flat, roll-off; 10 dB pad (nominal)

WEIGHT 247 grams 269 grams

DIMENSIONS 186.0 mm long, 47.6 mm head diameter 21.0 mm maximum body diameter 186.0 mm long, 47.6 mm head diameter 21.0 mm maximum body diameter

OUTPUT CONNECTOR Integral 5-pin XLRM-type Integral 5-pin XLRM-type

CABLE Balanced: 2.0 m long, 8 conductor, shielded, vinyl-jacketed stereo cable with 5-pin XLRF-type connector at microphone 5.0 m long, 8 conductor, shielded, vinyl-jacketed stereo cable with 5-pin XLRF-type connector

end and two 3-pin XLRM-type connectors at output end; at microphone end and two 3-pin XLRM-type connectors at output end

Unbalanced: 0.6 m long stereo cable with 5-pin XLRF-type connector at microphone end and 3.5 mm TRS connector at output end

ACCESSORIES FURNISHED AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; battery; soft protective pouch AT8405a stand clamp for 5/8”-27 threaded stands; windscreen; soft protective pouch

*1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL

AT8022 BP4025

TECHNICAL SPECIFICATIONS I REPORTER MICROPHONES23

TECHNICAL SPECIFICATIONS I UHF WIRELESS SYSTEMS

RECEIVING SYSTEM True diversity True diversity

IMAGE REJECTION >50 dB typical >50 dB typical

SIGNAL-TO-NOISE RATIO 104 dB at 30 kHz deviation (A-weighted), max.modulation 37 kHz 104 dB at 30 kHz deviation (A-weighted), max.modulation 37 kHz

TOTAL HARMONIC DISTORTION <1% (±10 kHz deviation at 1 kHz) <1% (±10 kHz deviation at 1 kHz)

SENSITIVITY 25 dBµV, (S/N 60 dB at 5 kHz deviation, A-weighted) 25 dBµV, (S/N 60 dB at 5 kHz deviation, A-weighted)

AUDIO OUTPUT (balanced) 27 mV (at 1 kHz, ±5 kHz deviation) 27 mV (at 1 kHz, ±5 kHz deviation)

OUTPUT CONNECTOR 3-pin mini XLR (TA3M-type) 3-pin mini XLR (TA3M-type)

MONITOR HEADPHONE OUPUT (typical) 35 mW max., 32Ω load (per channel) 35 mW max., 32Ω load

MONITOR HEADPHONE JACK 3.5 mm TRS, signals on both Tip and Ring 3.5 mm TRS, signals on both Tip and Ring

EXTERNAL POWER REQUIREMENTS 12V DC nominal, 500 mA 12V DC nominal, 500 mA

BATTERIES (not included) Six 1.5V AA alkaline Four 1.5V AA alkaline

CURRENT CONSUMPTION Dual-channel Operation: 600 mA typical; Single-channel Operation 350 mA typical

BATTERY LIFE Dual / Single Channel Operation 6 hours typical* / 10 hours typical* Single Channel Operation 10 hours typical*

DIMENSIONS 85.0 mm W x 133.0 mm H x 36.0 mm D 75.0 mm W x 125.00 mm H x 32.0 mm D

NET WEIGHT (without batteries) 425 grams 300 grams

ACCESSORIES FURNISHED Two flexible UHF antennas; two 45 cm (18”) TA3F Two flexible UHF antennas; one 45 cm (18”) TA3F

to XLRM output cables; belt pouch, velcro to XLRM output cables; belt pouch, velcro

* depends on battery type and use pattern

UHF OPERATING FREQUENCYBand C : 541.500 to 566.375 MHz

Band D : 655.500 to 680.375 MHz

Band E : 795.500 to 820.000 MHz

Band F : 840.125 to 864.900 MHz

NB OPERATING FREQUENCIES 981 - 996 total per band

FREQUENCY STABILITY ±0.005%, Phase Lock Loop frequency control

MODULATION MODE FM

OPERATING RANGE 100m (300') typical

OPERATING TEMP. RANGE – 5º C (23º F) to 45º C (113º F)

FREQUENCY RESPONSE 70 Hz to 15 kHz

ATW-R1810 ATW-R1820

RF POWER OUTPUT High: 30 mW; Low: 10 mW, nominal

SPURRIOUS EMISSIONS According to R&TTE Directive

DYNAMIC RANGE >105 dB, A-weighted

INPUT CONNECTIONS High impedance, low impedance, bias

ANTENNA TIP COLOR Band C: Blue

Band D: Green

Band E: Black

Band F: Grey

BATTERIES (not included) Two 1.5V AA alkaline

BATTERY LIFE Approximately 6 hours (High); 8 hours (Low), depending on battery type and use pattern

DIMENSIONS 66.0 mm W x 87.0 mm H x 24.0 mm D

NET WEIGHT (without batteries) 80 grams

RF POWER OUTPUT High: 30 mW; Low: 10 mW, nominal

SPURRIOUS EMISSIONS According to R&TTE Directive

DYNAMIC RANGE >105 dB, A-weighted

INPUT CONNECTOR 3-pin locking XLRF-type

MICROPHONE POWER Compatible with Condenser microphones rated to operate

on 12V phantom power or less.

BATTERIES (not included) Two 1.5V AA alkaline

BATTERY LIFE Approximately 6 hours (High); 8 hours (Low),

depending on battery type and use pattern

DIMENSIONS 40.0 mm x 111.0 mm x 40.0 mm

NET WEIGHT (without batteries) 199 grams

ATW-T1801 body-pack transmitter ATW-T1802 plug-on transmitter

ELEMENT Condenser Condenser Condenser Condenser Condenser Condenser Condenser

POLAR PATTERN Cardioid Omnidirectional Cardioid Omnidirectional Omnidirectional Cardioid Cardioid

FREQUENCY RESPONSE (microphone) 200-15,000 Hz 20-20,000 Hz 40-16,000 Hz 30-20,000 Hz 50-18,000 Hz – 30-20,000 Hz

(microphone + power module) 200-15,000 Hz 70-15,000 Hz 70-15,000 Hz 70-15,000 Hz 70-15,000 Hz – 70-15,000 Hz

CONNECTOR XLRM (on power module) XLRM (on power module) XLRM (on power module) XLRM (on power module) XLRM (on power module) XLRM (on power module) XLRM (on power module)

DIMENSIONS 23 mm long, Ø 5.3 mm 16 mm long, Ø 5.0 mm 25 mm long, Ø 10.2 mm 25 mm long, Ø 10.2 mm – – 27,5 mm long, Ø 8.4 mm

CABLE 1,4 m long 1,4 m long 1,4 m long 1,5 m long – 0,75 m long 1,4 m long

AT898 AT899 AT831aW AT803aW ATR35cW AT829cW ES943cW/C

24

Sales policies & limited warranty

Audio-Technica Product Availability and Sales Policies in EuropeThe Audio-Technica products featured in this catalogue are available throughout Great Britain, Western

and Eastern Europe, Africa and the Middle East. They are supplied through Audio-Technica Ltd, Leeds, UK.

Our products are available through a network of authorised distributors, as well as from dealers.

Audio-Technica Ltd does not sell its professional products directly to end users.

Limited WarrantyAll Audio-Technica products supplied by Audio-Technica Ltd are guaranteed for TWO years from date of purchase

to be free of defects in materials and workmanship.

In the event of such defect, the product will be repaired or replaced without charge.

Such products should be returned to the place of purchase, ie. the dealer or distributor together with proof

of purchase. The dealer or distributor will return such products to Audio-Technica Ltd, ensuring that prior authority

is sought from Audio-Technica Ltd. Should it not be possible to return products to the place of purchase, please

contact Audio-Technica Ltd directly with details of the defect. Returned goods cannot be accepted without the

appropriate returns authorisation number.

The Audio-Technica warranty excludes defects due to normal wear, abuse, shipping damage, or failure to use

the product in accordance with the instructions. This warranty is void in the event of unauthorised repair

or modification, or removal or defacing of the product label and/or serial number.

XLRM3

XLRM5

SINGLE

2 Year Warranty

Mini-Jack

Compatible with most Still Cameras

Compatible with most Video Cameras

Lithium Batteries

Stereo microphone

1.5v Batteries

For broadcastcamera use

XLR output

Phantom power

3/4’’ Jack output

5-pin XLR output

Dual ChannelSystem

Single ChannelSystem

Miniature XLR-typeconnector

Your dealer:

www.eu.audio-technica.com

ATC

AT1

0 -

VID

EO

- E

N

Audio-Technica Ltd

Technica HouseRoyal London Industrial EstateOld Lane, Leeds LS11 8AG England

Tel. : + 44 (0) 113 277 1441Fax : + 44 (0) 113 270 4836

e-mail : [email protected] www.audio-technica.com

©2010 Audio-Technica Ltd - Printed in the United Kingdom

E&OE*: Published specifications may be subject to change without notice.(*Errors and Omissions Excepted)

audio technica camera & video catalog

Technology