are you investing in welding automation?€¦ · via dell'artigiano, 55 38068 rovereto...
TRANSCRIPT
dvancedireeliveryystems
AWDS
are you investing inwelding automation?
AWDS TECHNOLOGIES SRL we can help you boost your productivityCopyright awds-technologies 9/2017
www.awds-technologies.comwww.awds-technologies.com
Via Dell'Artigiano, 5538068 Rovereto (Trento) Italytel: +39 0464 081540fax: +39 0464 080253
General E-mail: [email protected]: [email protected] & Marketing: [email protected] Support: [email protected]
We supply taylor-made parts and accessoriesto fit our maxiglide on your existing equipment
Maxiglide Conduit with Rolls
VERSION WITH ARAMID FIBERS COATING
VERSION WITH CORRUGATED PA12 OUTER HOSE
Quick - connectEnd Coupling
Quick - connectEnd Couplingwith anti-kink spring support
Swivel rotating support
“Cold wire” motorcontrol function
“Arc-Voltage" motorcontrol function
CE certifiedTutorial videos accessiblethrough QR codes
Brushless Motor withprecise torque control
Touch-screen digitalcontrols for more accurate
adjustments anddevice parameters settings
Quick connections compatible withMaxiglide conduit
Peek plastic pushing roll foraluminium welding wires
Steel pushing roll for carbonsteel welding wires
24 Volt Transformer
Quick - connectEnd couplings
Wire pulling roll Assembly (engaged both while thewire is being pushed and pulled through the conduit)
The double moldingTeflon + Rubber helpsmaintain the bodiesdynamically stretched
The junction rings allow 360° freerotation, to offset the tension built
by robot arm movements
Wire guiding roll Assembly (only engaged when thewire is being pushed through the conduit)
5.3 mm 6.0 mm
Fully assembled bareinner maxiglide
Would you rather place the weld wirepacks safely outside your robot cells?
SmartBooster is a reliable stand-alone auxiliary feeder which can e�ectively help push welding wires through Maxiglide runs up to 50 meters with multiple curves, particularly with setups which require the Maxiglide Conduit to be mounted inside the cable tracks or in the so called “wire farms” where the bulk packs are placed in a safe centralized area which can be easily accessed by forklifts and inspected by operators at any time.
Maxiglide Conduit with Rolls
VERSION WITH ARAMID FIBERS COATING
VERSION WITH CORRUGATED PA12 OUTER HOSE
Quick - connectEnd Coupling
Quick - connectEnd Couplingwith anti-kink spring support
Swivel rotating support
“Cold wire” motorcontrol function
“Arc-Voltage" motorcontrol function
CE certifiedTutorial videos accessiblethrough QR codes
Brushless Motor withprecise torque control
Touch-screen digitalcontrols for more accurate
adjustments anddevice parameters settings
Quick connections compatible withMaxiglide conduit
Peek plastic pushing roll foraluminium welding wires
Steel pushing roll for carbonsteel welding wires
24 Volt Transformer
Quick - connectEnd couplings
Wire pulling roll Assembly (engaged both while thewire is being pushed and pulled through the conduit)
The double moldingTeflon + Rubber helpsmaintain the bodiesdynamically stretched
The junction rings allow 360° freerotation, to offset the tension built
by robot arm movements
Wire guiding roll Assembly (only engaged when thewire is being pushed through the conduit)
5.3 mm 6.0 mm
Fully assembled bareinner maxiglide
Would you rather place the weld wirepacks safely outside your robot cells?
SmartBooster is a reliable stand-alone auxiliary feeder which can e�ectively help push welding wires through Maxiglide runs up to 50 meters with multiple curves, particularly with setups which require the Maxiglide Conduit to be mounted inside the cable tracks or in the so called “wire farms” where the bulk packs are placed in a safe centralized area which can be easily accessed by forklifts and inspected by operators at any time.
dvancedireeliveryystems
AWDS
are you investing inwelding automation?
AWDS TECHNOLOGIES SRL we can help you boost your productivityCopyright awds-technologies 9/2017
www.awds-technologies.comwww.awds-technologies.com
Via Dell'Artigiano, 5538068 Rovereto (Trento) Italytel: +39 0464 081540fax: +39 0464 080253
General E-mail: [email protected]: [email protected] & Marketing: [email protected] Support: [email protected]
We supply taylor-made parts and accessoriesto fit our maxiglide on your existing equipment