arab republic of egypt ministry of defense military ... - mtc · 17th int. conference on applied...
TRANSCRIPT
Arab Republic of Egypt Ministry of Defense Military Technical College
8th
International Scientific Conference of the Military Technical College
19-21 April 2016
المؤتمر الدولى العلمى الثامن للكلية الفنية العسكرية 2016 أبريل 19-21
Conference Program and Workshops of
The 17th
International Conference on Applied Mechanics and Mechanical Engineering
(AMME-17)
برنامج بحوث وورش عمل
المؤتمر الدولى السابع عشر للميكانيكا التطبيقية والهندسة الميكانيكية
Cairo 2016
1
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
PREFACE
The Military Technical College has the pleasure to organize the 17th International Conference on Applied Mechanics and Mechanical Engineering (AMME-17) which is sponsored by Ministry of Defense in the period of 19-21 April 2016. The main objective of this conference is to bring together scientists, researches and engineers of the Egyptian armed forces and their colleagues in the international academic and industrial institutions. This occasion provides a chance to exchange information in the following designated fields of interest:
MECHANICAL POWER ENGINEERING MP ROBOTIC AUTOMATION AND CONTROL RC MATERIAL SCIENCE AND PROCESSING MS PRODUCTION TECHNOLOGY PT SOLID MECHANICS SM AUTOMOTIVE ENGINEERING AE MECHANICAL DESIGN MD MECHATRONICS MC BALLISTICS BL
From 102 manuscripts submitted to the conference secretary, 73 papers have been accepted. These selected papers will be presented during the conference interval 19-21 April 2016 in 19 sessions. The conference activities also include invited lectures, workshops and seminars; there titles are:
High-Strain Superplasticity: Concept, Processing and Deformation Mechanism.
The Current Status of Austempered Ductile Iron (ADI). Modeling and Analysis of Extrusion Process, Product
and Tooling: Estimation and Prediction of Die Life.
3
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
Impact of Precipitation in Quench Induced Stresses in Large Industrial Aluminum Pieces.
Using Neutrons and X-Ray Beams in Modern Metallurgy. Double Swash Plate Pump with Adjustable Valve Ring
Concept. New Solutions to Optimized CNC Manufacturing
Applications.
Wear of Polymers and Composites. High Altitude Flying Wing UAV for Automatic Payload
Recovery and High Altitude Tests of Novel Propulsion Units.
Alphabetic indices of the key words and authors of the papers are provided at the end of this booklet, which will serve to identify the sessions in which the papers will be presented. Finally, the conference high committee hopes that the conference will achieve its planned mission and would like to acknowledge all contributors, members of the scientific committees, chairman and board members of the conference sessions. Note: Please, remember that you have only 15 min. to present your paper and 5 min. for discussion.
R. Admiral (r) Prof. Dr. A. M. Riad AMME-17 Conference Rapporteur
4
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
CONTRIBUTORS
Egyptian, Arab and Foreign Universities, Institutes and Organizations:
1- Egypt:
a- Armed Forces: Military Technical College (M.T.C.). Air Forces.
Armament Authority. Navy Forces.
b- Egyptian Universities, Institutes and Organization:
Ain Shams University. Alexandria University. Arab Academy for Science, Technology and
Maritime Transport.
Al-Azhar University. Benha University. Cairo University. Center of Metallurgical Research and
Development Institute (CMRDI).
El-Arish Higher Institute of Engineering. El-Menya University. Future University in Egypt. Heliopolis University Helwan University. Institute of Aviation Engineering. Minoufiya University. Modern Academy for Engineering and
Technology.
5
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
National Research Center (NRC). October University for Modern Science and
Arts (MSA)
Port Said University Suez University. Suez Canal Authority. The British University in Egypt. The German University in Cairo. Worker University. Zagazig University.
2- China:
Harbin Engineering University. The Chinese University of Hong Kong. National Taipei University of Technology. Tahua University of Science and Technology
3- France:
National Polytechnique Institute of Toulouse. University of Southern Brittany
4- India:
Indian Institute of Technology Madras. Malaviya National Institute of Technology
Jaipur.
5- K.S.A.:
King Faisal University. Taibah University.
6
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
6- Oman:
Sultan Qaboos University.
7- Romania:
"Politehnica" University of Timisoara. Romanian Space Agency.
8- Switzerland:
Swiss Federal Institute of Technology in
Lausanne.
9- Turkey:
University of Firat.
10- U.A.E.:
Masdar Institute of Science and Technology.
11- U.K.
Strathclyde University.
12- U.S.A.
Milwaukee School of Engineering. University of California, Irvin.
------------------------------------
7
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
CONFERENCE HIGH COMMITTEE
Maj. Gen.: M. M. Abdel-Wahab Chairman Maj. Gen.: N. A. Amer Vice-Chairman Maj. Gen. (R): M.T. Sallam Gen. Rapporteur
R. Admiral (R): A. M. Riad Rapporteur
CONFERENCE STEERING COMMITTEE
Brig. Gen. A. M. Fekry. Brig. Gen. W. M. Hussein
Col. A. M. Sharaf Col. M. A. Kamel. Col. M. H. Mabrouk Col. T. A. El-Nady. Col. M. Y. Ahmed
CONFERENCE ORGANIZING COMMITTEE
Brig. Gen. Y. I. El-Shaer
8
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
REVIEWERS
Professors from Military Technical College, National and International Universities, Institutes and Research Centers:
A. A. Afifi H. A. Metered
A. A. Banawan H. E. Ragheb
A. A. El-Maihy H. M. El-Taher
A. A. Omer H. M. Mahgoub
A. A. Tawfik H. R. Tantawy
A. E. Elweteedy H. Z. Fahim
A. F. El-Sherif K. A. Ali
A. G. Ibrahim K. E. Abdel-Aal A. K. Hussein (Iraq) K. M. Abdel-Rahman A. M. Bahgat K. M. El-Shazly A. M. El-Assal K. T. Meselhy A. M. El-Mahallawy M. A. Abdel-Shafy A. M. Elsebaie M. A. Abulela A. M. EL-Shabasy M. A. Afify A. M. El-Zahaby M. A. Elbestawi (Canada) A. M. Fikry M. A. EL-Sanabawy A. M. Mekled M. A. Elshafei A. M. Rashad M. A. Ismail A. M. Riad M. A. Khalil A. S. Abo El-Azm M. A. Shaheen A. S. El-Messalamy M. E. El-Nady A. S. Zidan M. H. Abdel-Latif A. Z. Khafagy M. H. Khobiz
E. A. El-Awady M. H. Mabrouk
E. E. El-Soaly M. I. Negm
G. A. Hussein M. M. Abdelrahman
G. E. El-Nashar M. M. Abdel-Wahab M. M. Ashry M. Y. Ahmed
M. M. Attia N. E. Gadallah H. A. Badr M. M. El-Behairy
9
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
M. M. Moussa P. Koshy (Canada) M. M. Osman R. M. Gadelrab M. M. Sayed Ahmed S. A. Salah M. M. Shaheen S. C. Veldhuis (Canada) M. M. Younes S. E. El-Shamarka M. N. A. Nasr T. A. El-Nady M. S. Asfoor T. H. El-Mahdy M. S. El-Raffie W. A. Orabi M. S. Hassan W. M. Hussein M. T. Sallam Y. H. Hossam El-Din O. F. Abdelhamid
--------------------------------
10
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
SCIENTIFIC COMMITTEE
Professors from Military Technical College, National and International Universities, Institutes and Research Centers:
A. A. Afifi K. A. Ali A. A. El-Maihy K. T. Meselhy A. A. Omer L. B. Kamar A. A. Zayed M. A. Abulela A. E. Elweteedy M. A. Afifi A. F Hussein M. A. El-Sanabawy A. G. Ibrahim M. A. Elshafei A. M. B. El-Shabasy M. A. Fayed A. M. El-Assal M. A. Ismail A. M. El-Mahallawy M. E. Shamekh A. M. El-Zahaby M. F. Abdel-Samee A. M. Kamel M. H. Abdel-Latif A. M. Rashad M. I. Negm A. S. Abo El-Azm M. K. Kamel A. S. Zidan M. M. Abdel-Wahab E. I. Morgan M. M. Moussa F. A. Mohamed M. M. Osman G. E. El-Nashar M. M. Younes H. M. Abd Allah M. T. Sallam H. M. El-Taher T. A. El-Nady H. M. Hussein S. M. Abd Rabbo H. M. Mahgoub S. E. El-Shamarka H. M. Negm W. A. El-Thalabawy I. A. El-Sherif W. S. Moghith I. S. Moustafa Y. H. Hossam El-Din
-------------------------
11
LOCATION OF CONFERENCE ROOMS
16
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
17
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
Part I:
SCIENTIFIC SESSIONS
18
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
Session No. 1
Automotive Engineering I
Room: B
Date: Tuesday 19/4/2016 Time: 1230 : 1345
Board:
Prof. Dr. Yehia H. Hossam El-Din Future Univ. Comd. Prof. Dr. Gamal E. El-Nashar M. T. C. Col. Dr. Hesham M. El-Taher M. T. C.
AE-1 (22)
Integrated Vehicle Chassis Control Based on Direct Yaw Moment and Active Front Steering
A. Elhefnawy, A. M. Sharaf, H. M. Ragheb and S. M. Hegazy
AE-2 (23)
Active Vehicle Safety Using Integrated Control of Body Roll and Direct Yaw Moment
A. Elhefnawy, A. M. Sharaf, H. M. Ragheb and S. M. Hegazy
AE-3 (100)
Modeling of Suspension System of a Light Tracked Vehicle
M. M. Abdelaziz, A. M. Salem and W. G. Kotb
19
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
Session No. 2
Robotic Automation and Control
Room: F
Date: Tuesday 19/4/2016 Time: 1230 : 1415
Board:
Prof. Dr. El-Sayed Imam Morgan German Univ. Prof. Dr. Mohamed Abdel-Ghany Fayed M. T. C. Assoc. Prof. Adel Abdel-Razek Omer M. T. C.
RC-1 (37)
Wheeled Mobile Robot Control Using Advanced Fuzzy Control
M. Elsayed, M. Sokar, S. Abd Rabbo and M. El-Arabi
RC-2 (55)
Leader-Following Consensus for a Class of Linear Multi-Agent Systems Under Switching Networks
J. Huang
RC-3 (58)
Design and Implementation of Navigation Control System for Unmanned Ground Vehicles
A. Khalil, S. Hegazy, A. Roheim and Y. H. Hossam El-Din
RC-4 (63)
Oceanic Wave Glider Overview; Development and Applications
A. M. Ahmed
RC-5 (92)
Trajectory Planning of Five DoF Manipulator: Dynamic Feed Forward Controller over Computed Torque Controller
M. Abou Elyazed, M. Mabrouk, M. Abo Elnor and H. Mahgoub
20
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
Session No. 3
Mechanical Power Engineering I
Room: G
Date: Tuesday 19/4/2016 Time: 1230 : 1415
Board:
Prof. Dr. Ibrahim S. Moustafa M. T. C. Brig. Gen. Dr. Ahmed M. Rashad M. T. C.
Col. Assoc. Prof. Ahmed S. Abo El-Azm M. T. C.
MP-1 (14)
Experimental and Numerical Studies on Emulsion (Oil-In-Water) Flow in S-Shaped Diffusers
K. A. Ibrahim, W. A. El-Askary, I. M. Sakr and H. A. Omara
MP-2 (25)
Effect of Jatropha Biofuel Viscosity on Internal Two Phase Flow Inside Ffervescent Atomizer for Gas Turbine Applications
A. Helmy, S. A. Wilson and A. Balabel
MP-3 (67)
Laminar Burning Velocity for Blends of Jojoba Bio-Gasoline with Basic Gasoline
M. S. Radwan, I. G. Elgizawy, Y. A. Attai and M. Gamal
WS-1 (S01)
Double Swash Plate Pump with Adjustable Valve Ring Concept
M. K. Bahr
21
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
Session No. 4
Solid Mechanics
Room: H
Date: Tuesday 19/4/2016 Time: 1230 : 1415
Board:
Prof. Dr. Hany M. Negm Cairo Univ.
Prof. Dr. Moustafa Adnan Elshafei M. T. C. Assoc. Prof. Mahmoud M. Younes M. T. C.
SM-1 (04)
Finite Element Simulation of Elastic and Quasi–Static Crack Propagation under Mixed Mode Loading Conditions
S. A. Yossif
SM-2 (20)
Modal Analysis and Testing of Modified Re-Entrant Hexagonal Honeycomb Cores
K. M. Abozied, M. O. Osman and T. H. Elmahdy
SM-3 (26)
The Development of Stress Based Continuum Damage Mechanics Model for Predicting the Formability of Magnesium Alloys under Cold/Warm Stamping Processes
M. S. Mohamed and P. Blackwell
SM-4 (64)
Variation of the Residual Stresses and Springback in Sheet Bending from Plane-Strain to Plane-Stress Condition Using Finite Element Modelling
A. Essa, M. A. Nasr and M. H. Ahmed
SM-5 (99)
Dynamic Stress Intensity Factors for an Interfacial Crack near a Non-Circular Cavity in Piezoelectric Bi-Materials
A. Hassan and T. S. Song
22
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
Session No. 5
Material Science and Processing I
Room: B
Date: Tuesday 19/4/2016 Time: 1500 : 1645
Board:
Prof. Dr. Mazen Ibrahim Negm Al-Azhar Univ. Prof. Dr. Mohamed Tolba Sallam M. T. C. Brig. Gen. Dr. Mohmoud Maher Osman M. T. C.
MS-1 (35)
Study of Mechanical Vibration on Structure and Properties of Mg-9Al Alloy During Solidification
V. Chaturvedi and U. Pandel
MS-2 (40)
The Effect of Aging Treatment on the Friction-Stir- Processed AA7075 Alloy with and without Surface Nano-Dispersion
M. Refat, A. Elashery, M. M. Ahmed and I. El-Mahallawi
MS-3 (47)
A Novel Technique for Production of Friction Stir Processed Rheocast Nano Reinforced AA2024 Alloy
W. Hoziefa, A. A. Mahdy, M. M. Ahmed, I. El-Mahallawi and A. Atlam
MS-4 (66)
Influence of Microstructure Features on Wear Behavior of Ti-64 Titanium Alloy
K. M. Ibrahim
MS-5 (96)
Experimental Determination of Thermal Properties of Chopped Fiber Composite Materials
A. Saif, H. Kamal, KH. Shoukry, O. Kamal and A. N. Zayed
23
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
Session No. 6
Automotive Engineering II
Room: F
Date: Tuesday 19/4/2016 Time: 1500 : 1645
Board:
Assoc. Prof. Abdel-Magid S. Zidan M. T. C. Brig. Gen. Dr. Amged M. Kamel M. T. C. Lt. Col. Dr. Moustafa A. Ismail M. T. C.
AE-4 (06)
Study of an Engine Monitoring System for Plug-In Series Hybrid Electric Scooters
K. L. Kuo
AE-5 (27)
On the Dynamics of Vehicle Passive Suspension Incorporating Twin-Tube Pressurized Shock Absorber
Y. M. Elattar, M. G. Rabie and S. M. Metwalli
AE-6 (28)
PDF versus PID Controller for Active Vehicle Suspension Y. M. Elattar, S. M. Metwalli and M. G. Rabie
24
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
Session No. 7
Production Technology I
Room: G
Date: Tuesday 19/4/2016 Time: 1500 : 1645
Board:
Prof. Dr. Ahmed M. El-Assal Benha Univ. Assoc. Prof. Metwally M. Moussa M. T. C. Col. Dr. Khaldoun T. Ismail Armament Auth.
PT-1 (07)
The Importance of Additive Manufacturing Processes in Industrial Applications
M. Al-Makky and D. Mahmoud
PT-2 (09)
Effect of Exit Suppressed Position on Delamination in Drilling Composite Materials Using Core Drill
C. C. Tsao
PT-3 (21)
Aggregate Production Planning Considering Performance Evolution: A Case Study
E.-A. Attia, A. Megahed, S. Baioumy, A. Elbetar and P. Duquenne
PT-4 (24)
A Multi-Stage Supply Chain System Controlled by Kanban
M. A. Amer, E.-A. Attia and S. Baioumy
PT-5 (93)
Investigation the Critical Success Factors of TQM Criteria in the Industrial Organizations
N. Sobhi, S. A. Salah and E. Magdy
25
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
Session No. 8
Material Science and Processing II
Room: B
Date: Wedensday 20/4/2016 Time: 900 : 1045
Board:
Prof. Dr. Mohamed Hazem Abdel-Latif Ain Shams Univ. Assist. Prof. Abdel-Hamid M. El-Mahallawy M. T. C. Col. Dr. Walid Abdel-Hai El-Thalabawy M. T. C.
MS-6 (01)
The Effect of Tantala and Niobia Addition on the Physical and Mechanical Properties of α Alumina Ceramics
S. M. Naga, M. Awaad and A. M. Hassan
MS-7 (02)
Characterization of Closed-Cell Aluminum Foams Produced by Melt-Based Technique
H. A. Afifi, M. H. Ahmed and I. M. El-Galy
MS-8 (03)
Influence of Sintering Temperature, Glass and Starch Powder on Compression Properties of Carbon Steel Foam Containing 10% Mill Scale
S. N. Ghali
MS-9 (11)
Formation of Super Saturated Solid Solution Fe-50wt.%Cu by High Energy Ball Milling (Attritor)
A. E. Hannora, F. F. Hanna and L. K. Marei
MS-10 (56)
Microstructural and Thermal Investigations of Cu-Al-Mn-Ni Shape Memory Alloys
C. A. Canbay and V. Sampath
26
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
Session No. 9
Production Technology II
Room: F
Date: Wednesday 20/4/2016 Time: 900 : 1045
Board:
Prof. Dr. Saber M. Abd Rabbo Benha Univ. Assoc. Prof. Hussein M. A. Hussein Helwan Univ. Brig. Gen. Dr. Amr Fekry Hussein M. T. C.
PT-6 (38)
The Effect of Cutting Parameters and the Frequency of Interrupt on Ceramic Tool Wear in Interrupted Hard Turning
O. M. Abdal-Aaziz, E. A. Bary, A. Mahrous and A. Barakat
PT-7 (57)
Speeding up Algorithm for Building the STL Model Using 3D Printing
M. Hamoud, A. I. EL-Wahab and A. Barakat
PT-8 (62)
Automated Inspection of Surface Defects Using Machine Vision
M. El-Agamy, M. A. Awad and H. A. Sonbol
PT-9 (101)
Statistical Modeling for Alumina Laser Sintering
E. M. Fayed, A. S. Elmesalamy, M. Sobih and Y. I. El-Shaer
27
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
Session No. 10
Material Science and Processing III
Room: B
Date: Wedensday 20/4/2016 Time: 1100 : 1245
Board:
Prof. Dr. Mazen Ibrahim Negm Al-Azhar Univ. Assist. Prof. Abdel-Hamid M. El-Mahallawy M. T. C. Col. Dr. Walid Abdel-Hai El-Thalabawy M. T. C.
Invited Lecture
(S02)
High-Strain Superplasticity: Concept, Processing and Deformation Mechanism
F. A. Mohamed
Invited Lecture
(S03)
The Current Status of Austempered Ductile Iron (ADI)
A. Nofel
MS-11 (75)
Effect of GTA Welding Parameters on Mechanical and Corrosion Properties of 254SMO Superaustenitic Stainless Steel
A. El-Batahgy, I. Hamed and H. Hussein
28
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
Session No. 11
Production Technology III
Room: F
Date: Wedensday 20/4/2016 Time: 1100 : 1245
Board:
Prof. Dr. Adel M. Badawy El-Shabasy Ain Shams Univ. Assoc. Prof. Atef A. Afifi German Univ. Brig. Gen. Dr. Wael S. Moghith M. T. C.
PT-10 (30)
Experimental Investigation of Abrasive Jet Machining of Glass
E. Abdelnasser, A. Elkaseer and A. Nassef
PT-11 (32)
Surface Generation in Ultra-Precision Turning Considering Process Uncertainty: Modeling and Experimental Validation
S. Elsanabary, A. Elkaseer, S. Abd-Rabbo, M. AbdElsalam and S. Abdou
PT-12 (36)
FE Simulation Study of Ultra-Precision Turning of Stainless Steel 316L
A. Abdelaziz, A. Elkaseer, M. Saber and A. Nassef
WS-2 (S04)
New Solutions to Optimized CNC Manufacturing Applications
A. But
29
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
Session No. 12
Mechanical Power Engineering II
Room: G
Date: Wednesday 20/4/2016 Time: 1100 : 1245
Board:
Maj. Gen. (r) Dr. Salman E. El-Shamarka Former Command.
of M. T. C. Assist. Prof. Mohamed A. Afifi M. T. C. Brig. Gen. Dr. Ayman Gomaa Ibrahim M. T. C.
MP-4 (44)
On the Parameters Affecting the Performance of Adsorption Refrigeration System
A. R. El-Ghalban, H. Kotb and M. S. Mikhaeil
MP-5 (54)
Solar Distiller with Flat Plate Collector and Thermal Storage
M. A. Farahat, M. M. Mousa and N. H. Mahmoud
MP-6 (70)
CFD Investigation of Smoke Management in Underground Tunnel
W. M. Sweida, O. A. Huzzain and E. E. Khalil
MP-7 (83)
Design of a Combined Cooling and Heating System Driven by a Back Pressure Steam Turbine in Borg El-Arab
M. A. Nawar, E. Elgendy and A. Mostafa
MP-8 (84)
Experimental Evaluation of Condensation Heat Transfer Coefficient of R-417A in Horizontal Tubes
R. Gendy, E. Elgendy, H. Mahmoud and A. B. Helali
30
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
Session No. 13
Mechanical Design
Room: H
Date: Wednesday 20/4/2016 Time: 1100 : 1245
Board:
Prof. Dr. Abdel-Naser A. Zayed Heliopolis Univ. Assist. Prof. Moustafa M. Abdel-Wahab M. T. C. Brig. Gen Dr. Mohamed F. Abdel-Samee M. T. C.
MD-1 (59)
An Automated Hard-Points Vision Test of a New-Concept Car
H. M. Hussein, A. Mahrous, M. Elsayed, M. Ebrahim, M. Zakey, M. Fathy, M. Abdein, H. Othman, A. Faragallah and M. Soliman
MD-2 (61)
Computer Aided Tradition Jigs And Fixtures Design
H. M. Hussein, A. Mahrous, A. F. Barakat and O. M. Dawood
MD-3 (65)
Topology Optimization of a Pressure Chamber Design Using Computer Aided Design Software
Y. I. El-Shaer
MD-4 (91)
Array Signal Processing for Crack Detection in Plates
A. Desoki, M. Mahgoub and H. Negm
WS-3 (S05)
Wear of Polymers and Composites
A. Abdelbary
31
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
Session No. 14
Material Science and Processing IV
Room: B
Date: Wednesday 20/4/2016 Time: 1300 : 1445
Board:
Prof. Dr. Farghalli A. Mohamed University of
California Irvin, U.S.A.
Brig. Gen. Dr. Mahmoud Maher Osman M. T. C. Col. Dr. Mohamed E. Shamekh M. T. C.
Invited Lecture
(S06)
Modeling and Analysis of Extrusion Process, Product and Tooling: Estimation and Prediction of Die Life
Sayyad Z. Qamar
MS-12 (73)
Papers/Material Science IV/MS-12.pdfA Review on
Formability Prediction and Constitutive Damage Models of Sheet Forming of Magnesium Alloys
M. Farouk and M. Mohamed
MS-13 (74)
Review on Sheet Metal Forming Process of Aluminum Alloys
A. Ismail and M.S. Mohamed
MS-14 (85)
Ultrafine-Grained Materials Produced by Severe Plastic Deformation
M. El-Masry and M.M.S. Abo-Elkhair
32
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
Session No. 15
Mechanical Power Engineering III
Room: G
Date: Wednesday 20/4/2016 Time: 1300 : 1445
Board:
Prof. Dr. Laila Basiouny A. Kamar Port Said Univ. Assist. Prof. Ahmed E. Elweteedy M. T. C.
Assist. Prof. Ali Abdel-Ghany El-Maihy M. T. C.
MP-9 (19)
Buoyancy Driven Flow within Uniformly Heated Eccentric Annulus
F. M. Mahfouz and R. M. Rizk-Allah
MP-10 (80)
Heat Transfer Enhancement from Electronic Module in a Horizontal Channel Using a Curved Deflector
A.S. Rosas, R. K. Khalil, A. A. Abdel-Aziz and K. M. El-Shzaly
MP-11 (82)
Experimental Investigation of Heat Transfer and Thermal Efficiency for Lean Combustion of LPG Gas Hypermixing with Super Heated Steam on Swirling Surface Configuration
S. A. Abdelrahman and M. E. Gomaa
MP-12 (94)
Buoyancy Boxes (Sponsons) Effects on Sea Keeping Qualities of RORO/PAX Ships
Y. Welaya, M. A. Kotb and T. M. Hassan
MP-13 (97)
Numerical Study of Transfer Processes in Sweeping Gas Membrane Water Distillation
A. A. Aboulkasem, M. S. Hassan, A. G. Ibrahim, S. El-Shamarka
33
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
Session No. 16
Mechatronics
Room: H
Date: Wednesday 20/4/2016 Time: 1300 : 1445
Board:
Assoc. Prof. Ibrahim A. El-Sherif M. T. C. Assoc. Prof. Hussein M. Mahgoub M. T. C. Assist. Prof. Mohamed A. Abulela Helwan Univ.
MC-1 (87)
Dynamics and Measuring of Feet Force Distributions of Six-Legged Robot
A. S. Zaghloul, W. M. Hussein and A. Badawy
MC-2 (88)
Evaluating In-Car Design Using a Novel Upgradeable Test: The Normalized Three Weight (NTW) Index
M. N. Tawfeek, H. S. Ayoub, W. M. Hussein and Y. H. Hossam El-Din
MC-3 (89)
Smart Diagnostic System for Automotive Multistage Mechanical Transmissions Using Multi-Class Support Vector Machine
A. O. Raslan, W. M. Hussein and Y. I. El-Shaer
MC-4 (90)
Scoring Models for Automotive Multistage Mechanical Transmissions Using Principal Component Analysis
A. O. Raslan, W. M. Hussein and Y. I. El-Shaer
34
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
Session No. 17
Material Science and Processing V
Room: B
Date: Thursday 21/4/2016 Time: 900 : 1045
Board:
Prof. Dr. Mohamed Hazem Abdel-Latif Ain Shams Univ. Brig. Gen. Dr. Mahmoud Maher Osman M. T. C. Assist. Prof. Khaled Almazy Ali M. T. C.
Invited Lecture
(S07)
Impact of Precipitation in Quench Induced Stresses in Large Industrial Aluminum Pieces
N. Chobaut, D. Carron, P. Schloth and J.-M. Drezet
Invited Lecture
(S08)
Using Neutrons and X-Ray Beams in Modern Metallurgy J.-M. Drezet
MS-15 (98)
Optimization of Electron Beam Welding Parameters of Dissimilar Joint of AISI 304 Stainless Steel and AISI 1020 Low Carbon Steel
M. Nasr El-Deen, M. Shamekh, W. Elthalabawy and M.T. Sallam
35
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
Session No. 18
Mechanical Power Engineering IV
Room: F
Date: Thursday 21/4/2016 Time: 900 : 1045
Board:
Prof. Dr. Ali Mohamed El-Zahaby M. T. C. Col. Dr. Tarek Abdel-Latif El-Nady M. T. C.
Col. Dr. Mohamed Khalil Kamel M. T. C.
MP-14 (29)
Performance Analysis of a Single Shaft Gas Turbine Using Biofuels in an Object-Oriented Environment
P. Christopoulou and M. I. Hassan
MP-15 (42)
Numerical Analysis of Turbulent Flow in Centrifugal Pump
S. M. Selim, M. A. Hosien, S. M. El-Behery and M. Elsherbiny
MP-16 (53)
Numerical Study on Wind Turbine Wakes under Thermally-Stratified Conditions
M. R. Abuhegazy, A. M. AbdelSalam, I. M. Sakr and W. A. El-Askary
MP-17 (69)
Winglet Cant and Sweep Angles Effect on Aircraft Wing Performance
E. S. Abdelghany, E. E. Khalil, O. E. Abdellatif and G. ElHarriri
36
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
Session No. 19
Ballistics
Room: G
Date: Thursday 21/4/2016 Time: 900 : 1045
Board:
Assoc. Prof. Mohamed Allam El-Sanabawy M. T. C. Assoc. Prof. Hamed Mahmoud Abd Allah M. T. C. Col. Dr. Mohamed H. Abdel-Shafi M. T. C.
BL-1 (15)
Theoretical and Experimental Investigation of Resisto-jet Thruster
A. E. Makled and M. A. Othman
BL-2
(68)
Ballistic Impact Response of an Aluminum Sandwich Panel with Auxetic Honeycomb Core Structure
R. A. Mohamed, S. M. Lawaty and A. M. El-Butch
BL-3
(76)
Experimental, Computational and Empirical Evaluation of Supersonic Missile Aerodynamic Coefficients
L. A. El-Mahdy, M. Y. Ahmed, O. K. Mahmoud and O. E. Abdel-
Hameed
BL-4 (78)
Small Launcher Enabled by Hybrid Rocket Motor Technology
F. Mingireanu
BL-5 (102)
Numerical Simulation of Flow Field in Coaxial Gun Recoil System
W. M. El-Saady, A. Z. Ibrahim and A. A. Abdallah
WS-4 (S09)
High Altitude Flying Wing UAV for Automatic Payload Recovery and High Altitude Tests of Novel Propulsion Units
F. Mingireanu
37
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
Part II:
INVITED LECTURES, WORKSHOPS AND
SEMINARS
38
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
WS-1
Double Swash Plate Pump
Room: G
Date: Tuesday 19/4/2016 Time: 1230 : 1415
Board:
Prof. Dr. Ibrahim S. Moustafa M. T. C. Brig. Gen. Dr. Ahmed M. Rashad M. T. C.
Col. Assoc. Prof. Ahmed S. Abo El-Azm M. T. C.
WS-1 (S01)
Double Swash Plate Pump with Adjustable Valve Ring Concept
M. K. Bahr
43
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
WS-2
Manufacturing Optimization
Room: F
Date: Wedensday 20/4/2016 Time: 1100 : 1245
Board:
Prof. Dr. Adel M. Badawy El-Shabasy Ain Shams Univ. Assoc. Prof. Atef A. Afifi German Univ. Brig. Gen. Dr. Wael S. Moghith M. T. C.
WS-2 (S04)
New Solutions to Optimized CNC Manufacturing Applications
A. But
44
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
WS-3
Polymer Tribology
Room: H
Date: Wednesday 20/4/2016 Time: 1100 : 1245
Board:
Prof. Dr. Abdel-Naser A. Zayed Heliopolis Univ. Assist. Prof. Moustafa M. Abdel-Wahab M. T. C. Brig. Gen Dr. Mohamed F. Abdel-Samee M. T. C.
WS-3 (S05)
Wear of Polymers and Composites
A. Abdelbary
45
17th
Int. Conference on Applied Mechanics and
Mechanical Engineering, April 19-21, 2016.
Military Technical College Kobry El-Kobbah,
Cairo, Egypt.
WS-4
Noval Propulsion Unit of UAV
Room: G
Date: Thursday 21/4/2016 Time: 900 : 1045
Board:
Assoc. Prof. Mohamed Allam El-Sanabawy M. T. C. Assoc. Prof. Hamed Mahmoud Abd Allah M. T. C. Col. Dr. Mohamed H. Abdel-Shafi M. T. C.
WS-4 (S09)
High Altitude Flying Wing UAV for Automatic Payload Recovery and High Altitude Tests of Novel Propulsion Units
F. Mingireanu
46