aquaseal - npcil e-tenders | public tenders | offline tenders€¦ · en 1092-2 pn 10, bs 4504 pn...

Aquaseal Butterfly & Check Valves

2

L&T

Val

ves

L&T Valves Limited is a wholly-owned subsidiary of L&T and one of the largest valve manufacturers in the world.

The company has three modern manufacturing facilities, in Chennai, Coimbatore and Kancheepuram, in Tamil Nadu, India. The company leverages its world-class capabilities in design, quality assurance and manufacturing to ensure that their products consistently meet customer expectations.

Product Range:• Gate, Globe & Check Valves • Valves for Power • Pipeline & Process Ball Valves • Triple-offset Butterfly Valves • Flanged and Wafer-type Butterfly & Check Valves • Double Block and Bleed Plug Valves• Control Valves• Customised Solutions

The quality management system is certified to comply with ISO 9001 and API Spec Q1. The company is licensed to offer products monogrammed API 600, API 6D, API 609 as well as valves with CE Marking (Pressure Equipment Directive 97/23/EC) and ATEX certification (Council Directive 94/9/EC). L&T Valves meets the requirements of ISO 14001 and OHSAS 18001, and every phase of manufacture is governed by an institutionalised environment, health and safety policy.

L&T Valves distribution network spans the globe, partnering some of the largest valve distribution companies in the world. In India, L&T Valves has a presence in every industrial centre through a network of offices, stockists, automation centres and service franchisees.

3

L&T Valves manufactures a comprehensive range of Butterfly & Check Valves. The range addresses water treatment and distribution systems, power plants, utility lines, fire water lines and HVAC.

• Aquaseal10 Integrally-moulded Butterfly Valve in PN 10• Aquaseal16 Integrally-moulded Butterfly Valve in PN 16• AquasealPlus Integrally-moulded Butterfly Valve in Class 150• Aquaseal25 Integrally-moulded Butterfly Valve in PN 25• AquasealChek Dual-plate Check Valve• AquasealMax Large-size Fabricated Steel Butterfly Valve• AquasealFabChek Fabricated Steel Check Valve

The versatile range is available in various body styles, materials, and actuation options to suit customer requirements.

AquasealButterfly&CheckValves

Body StylePressure Rating

2 2½ 3 4 5 6 8 10 12 14 16 18 20 24 26 28 30 32 36

50 65 80 100 125 150 200 250 300 350 400 450 500 600 650 700 750 800 900

WaferClass 150

• • • • • • • • • • • • • •Lugged • • • • • • • • • • • • • •Flanged • • • • • • • • • • • • • •


2 2½ 3 4 5 6 8

50 65 80 100 125 150 200

Wafer PN 25 • • • • • • •

AquasealPlusIntegrally-moulded Butterfly Valve - Class 150


2 2½ 3 4 5 6 8 10 12 14 16 18 20 24

50 65 80 100 125 150 200 250 300 350 400 450 500 600

Wafer PN 10 • • • • • • • • • • • • • •

Aquaseal10Integrally-moulded Butterfly Valve - PN 10


Size

Flanged, Fabricated

PN 6

Available in sizes up to 120” (3000 mm)PN 10

PN 16

AquasealMaxLarge-size Fabricated Steel Butterfly Valve AquasealFabChekFabricated Steel Check Valve



2 2½ 3 4 5 6 8

50 65 80 100 125 150 200

Wafer

PN 10 • • • • • • •PN 16 • • • • • • •

Class 125 • • • • • • •

AquasealChekDual-plate Check Valve

Aquaseal16 Integrally-moulded Butterfly Valve - PN 16


2 2½ 3 4 5 6 8 10 12 14 16 18 20 24 26 28 30 32 36

50 65 80 100 125 150 200 250 300 350 400 450 500 600 650 700 750 800 900

Wafer

PN 16

• • • • • • • • • • • • • •Lugged • • • • • • • • • • • • • •Flanged • • • • • • • • • • • • • •

4


Aquaseal10 Integrally-moulded Wafer-type Butterfly Valve is available in sizes from 50 mm (2”) to 600 mm (24”), in PN 10 pressure rating. The valve was developed to provide reliable sealing in water and air lines, and is today the industry benchmark.

The most striking feature of Aquaseal10 Butterfly Valve is its integrally-moulded body liner. Aquaseal’s elastomer body seat is vulcanised insitu onto the body using high temperature and pressure, and this provides longer life and superior performance when compared to valves with loose liners.

Aquaseal 10 requires no maintenance, and is truly a fit-and-forget valve.

Parameter Standard

Valve Design EN 593 (BS 5155), API 609, MSS SP 67, ISO 5752

Pressure Testing EN 12266/ API 598

End ConnectionTo suit BS 10 Table D & E, ASME B 16.1 Class 125, B 16.5 Class 150,

EN 1092-2 PN 10, BS 4504 PN 10, IS 6392 Table 11

ComplianceStandards

MaterialsofConstruction PressureRatingComponents Materials

BodyCast Iron EN 1561 (BS 1452)

Gr. 200, Gr. 250

Body Liner Nitrile, EPDM

Disc Cast Iron EN 1561 (BS 1452) Gr. 250, CF8M

Shaft BS 970 - 080M40

Rated Working Pressure (bar) 10

Shell Test Pressure (bar) 15

Seat Test Pressure (bar) 11

Other material avaible on request

5

Top Shaft

O Ring

Body

Disc

Bottom Shaft

Weather Seal

Bearing

Anti-Blow Out Pin

Dowel Pin

Bearing

Feat

ure

s &

Ben

efits

Body Liner

LongerLifeThe strength of the vulcanised liner as well as its strong bonding with the body ensure that it doesn’t get deformed and torn by the disc during valve operations. Further, friction during operations is minimised owing to the smooth liner surface. The strong seat and reduced friction greatly enhance service life of the valve

TightSealing,andConsistentLowTorqueBubble-tight sealing is obtained by the tight interference fit between liner and disc. The insitu moulded seat does not deform with age, and hence the operating torque stays low and consistent during the entire life cycle of the valve. Aquaseal is the valve of choice for actuated systems because of high reliability and consistent torque.

ReliableDrivePositive shaft-disc connection with anti-blow out is a key Aquaseal feature. The shaft is Xylan-coated to reduce friction and improve wear resistance. Further, the self-lubricated bearings reduce the torque and increase valve reliability.

EaseofInstallationThe integral liner of the valve acts as a gasket between the valve and companion flange. The liner being bonded to the body doesn’t get stretched or damaged during installation unlike loose liners.

LowerResistancetoFlowThe discs are hydrodynamically designed to provide minimum resistance to flow and improved flow coefficients.

AssuredShaftSealingThe flat profiles on the top and bottom of Aquaseal disc engage with matching profiles on the body liner, and the large area of contact prevents leakage to atmosphere. Integrally moulded O-Rings that compresses around the top shaft provide a secondary seal. Weather seal is provided to prevent the ingress of foreign particles on valves with flow control lever.

ActuatorMountingPlatformThe integral ISO 5211 platform facilitates direct mounting of actuators and gear units, thereby improving system reliability and efficiency.

6

Valve SizeA B C D D1 E F G H ZN ZF

Weight

NPS DN FC Lever Gear Unit

2 50 43 99 65 129 228 152 163 132 176 27 4 2.5 11

2½ 65 46 110 78 140 239 152 163 132 176 47 10 3 11

3 80 46 116 85 146 245 152 163 132 176 63 16 3 12

4 100 52 134 105 164 263 152 163 132 268 83 23 5 14

5 125 56 164 118 194 293 152 163 132 268 107 32 7 15

6 150 56 177 144 207 306 152 163 132 268 136 45 9 17

8 200 60 235 169 300 365 152 163 132 405 185 67 16 23

10 250 68 259 214 332 438 250 197 181 513 234 88 27 32

12 300 78 284 249 357 463 250 197 181 516 280 106 36 40

14 350 92 318 275 512 300 218 217 324 123 57

16 400 102 370 310 564 300 218 217 374 144 70

18 450 114 410 336 604 300 218 217 423 166 89

20 500 127 448 362 642 300 218 217 475 183 129

24 600 154 510 430 704 300 218 217 573 220 170

Dimensions-PN10

All dimensions in mm and weights in kg

DN 50 to DN 300 DN 50 to DN 600


8

Parameter Standard

Valve Design EN 593 (BS 5155), API 609, MSS SP-67

Pressure Testing EN 12266 Part 1&2, API 598, ISO 5208

End ConnectionWafer Flangeless, Lugged (EN 1092),

ASME B16.42 & ASME B16.5 Class150/ BS 4504 PN 16

Face-to-FaceEN 558 Series 20 (For 350mm - EN 558 series 25)/ API 609 Cat A,

MSS SP-67 (Narrow Body), ISO 5752 (Short)

ComplianceStandards

MaterialsofConstructionComponents Materials

Body

Cast Iron IS 1561 EN GJL-250, SG Iron to

EN 1563-400/ 18, CS to A 216 Gr. WCB

Seat/ Liner Nitrile Rubber, EPDM, Viton

Disc

SG Iron to EN 1563-400/ 18 with Nylon-coating,

CF8, CF8M to A 351,AB2 to IS EN 1982, CF3M

StemASTM A479 Type 410 with

Xylan® Coating, 17-4 PhBearing Acetal, PTFE, Phosphor Bronze

Valves in other materials available on demand


Aquaseal 16 Integrally-moulded Butterfly Valve sets a new benchmark in performance for butterfly valves. The versatile valve is offered in a variety of elastomer-disc combinations to address myriad process requirements. The highly reliable butterfly valve has successfully completed over 10,000 cycles at its rated pressure.

Available in sizes from 50 mm (2”) to 900 mm (36“), the valve is available in Cast Iron, SG Iron and carbon steel, in a variety of body styles, materials and actuation options. The body seat of Aquaseal16 Butterfly Valve is vulcanised insitu onto the body, which provides longer life and superior performance when compared to valves with loose liners.



Seat Test Pressure (bar) 17.6

PressureRating

9

Feat

ure

s &

Ben

efits

LongerLife

ReliableDrive

AssuredShaftSealing

The strength of the vulcanised liner as well as its strong bonding with the body ensure that it doesn’t get deformed and torn by the disc during valve operations. Further, friction during operations is minimised owing to the smooth liner surface. The strong seat and reduced friction greatly enhance service life of the valve.

TightSealing,andConsistentLowTorqueBubble-tight sealing is obtained by the tight interference fit between liner and disc. The insitu moulded seat does not deform with age, and hence the operating torque stays low and consistent during the entire life cycle of the valve. High reliability and consistent torque make Aquaseal 16 the ideal valve for actuated systems.

LowerTorque,LongerLifeThe Aquaseal 16 disc is profiled for smoother flow. Further the coating/ encapsulation of Nylon and EPDM on the disc helps to reduce torque and prevent disc damage.

In Aquaseal 16 a two-piece shaft is employed for closer control and smooth operation. The shaft is Xylan-coated to reduce friction and improve wear resistance. While the square shaft provides positive drive, the bottom shaft acts as a pivot for operational ease.

The flat profiles on the top and bottom of Aquaseal Plus disc engage with matching profiles on the body liner, and the large area of contact prevents leakage to atmosphere. Integrally moulded O-Ring that compresses around the blowout-proof shaft provide a secondary seal.

EnhancedReliabilityThe rugged body is designed to withstand pipeline stresses and vibrations. Further, enhanced liner thickness assures reliable performance over an extended service. Reinforcements are provided on Aquaseal 16 disc also.


Top Shaft

O Ring

Body

Body Liner

Disc

Bottom Shaft

Weather Seal

Bearing

Dowel Pin

Bearing

Anti-Blow Out Pin

10


Valve with Flow Control Lever

G

F

Water Flangeless Valve

E

C

B

D

A ZF

ZN

D

Aquaseal16Integrally-moulded Butterfly Valve - PN 16Aquaseal16Integrally-moulded Butterfly Valve - PN 16 (Wafer & Lugged)

Valve SizeA B

C

D

E F G

ZN ZF

WeightFlow

ControlLever

StandardGear Unit

Heavy Duty

Gear Unit

WaferFlangeless

WaferLugged

FlowControlLever

StandardGear Unit

Heavy Duty

Gear Unit

FlowControlLever

StandardGear Unit

Heavy Duty

Gear UnitFC Lever Standard Gear Unit

NPS DN Wafer Lugged Wafer Lugged

2 50 43 99 129 277 - 65 96 158 176 181 - 216 242 - 24 4 3 4 11 12.5

2½ 65 46 110 140 288 - 78 105 180 176 181 - 216 242 - 46 10 3.5 5 11.5 13

3 80 46 116 146 294 - 85 123 190 176 181 - 216 242 - 62 16 4 8 12 16

4 100 52 134 164 312 - 105 157 216 268 181 - 308 242 - 82 23 6 10.5 14 18.5

5 125 56 164 194 342 - 118 180 255 268 181 - 308 242 - 107 32 7 11.5 15 20

6 150 56 177 207 355 - 144 212 280 268 181 - 308 242 - 135 45 9.5 14.5 17.5 22.5

8 200 60 235 300 428 450 169 262 345 405 217 255 470 290 375 184 67 18 29.5 25 36

10 250 68 259 332 452 476 214 322 405 513 217 255 610 290 375 234 88 30 44 35 48.5

12 300 78 284 357 477 501 249 373 485 516 217 255 612 290 375 279 106 41 61 45 66

14 350 92 318 - 510 535 304 430 530 - 217 255 - 290 375 324 123 - - 72 106

16 400 102 370 - - 587 340 481 600 - - 255 - - 375 374 144 - - 113 156

18 450 114 409 - - 790 408 524 650 - - 437 - - 552 423 163 - - 162 206

20 500 127 441 - - 828 430 583 710 - - 437 - - 552 475 183 - - 189 264

24 600 154 501 - - 889 500 685 820 - - 437 - - 552 573 220 - - 270 362

Valve SizeA B

C

D

E F G

ZN ZF

WeightFlow

ControlLever

StandardGear Unit

Heavy Duty

Gear Unit

WaferFlangeless

WaferLugged

FlowControlLever

StandardGear Unit

Heavy Duty

Gear Unit

FlowControlLever

StandardGear Unit

Heavy Duty



2 50 43 99 129 277 - 65 96 158 176 181 - 216 242 - 24 4 3 4 11 12.5

2½ 65 46 110 140 288 - 78 105 180 176 181 - 216 242 - 46 10 3.5 5 11.5 13

3 80 46 116 146 294 - 85 123 190 176 181 - 216 242 - 62 16 4 8 12 16

4 100 52 134 164 312 - 105 157 216 268 181 - 308 242 - 82 23 6 10.5 14 18.5

5 125 56 164 194 342 - 118 180 255 268 181 - 308 242 - 107 32 7 11.5 15 20

6 150 56 177 207 355 - 144 212 280 268 181 - 308 242 - 135 45 9.5 14.5 17.5 22.5

8 200 60 235 300 428 450 169 262 345 405 217 255 470 290 375 184 67 18 29.5 25 36

10 250 68 259 332 452 476 214 322 405 513 217 255 610 290 375 234 88 30 44 35 48.5

12 300 78 284 357 477 501 249 373 485 516 217 255 612 290 375 279 106 41 61 45 66

14 350 92 318 - 510 535 304 430 530 - 217 255 - 290 375 324 123 - - 72 106

16 400 102 370 - - 587 340 481 600 - - 255 - - 375 374 144 - - 113 156

18 450 114 409 - - 790 408 524 650 - - 437 - - 552 423 163 - - 162 206

20 500 127 441 - - 828 430 583 710 - - 437 - - 552 475 183 - - 189 264

24 600 154 501 - - 889 500 685 820 - - 437 - - 552 573 220 - - 270 362

11

Valve SizeA B

C

D

E F G

ZN ZF

WeightFlow

ControlLever

StandardGear Unit

Heavy Duty

Gear Unit

WaferFlangeless

WaferLugged

FlowControlLever

StandardGear Unit

Heavy Duty

Gear Unit

FlowControlLever

StandardGear Unit

Heavy Duty



2 50 43 99 129 277 - 65 96 158 176 181 - 216 242 - 24 4 3 4 11 12.5

2½ 65 46 110 140 288 - 78 105 180 176 181 - 216 242 - 46 10 3.5 5 11.5 13

3 80 46 116 146 294 - 85 123 190 176 181 - 216 242 - 62 16 4 8 12 16

4 100 52 134 164 312 - 105 157 216 268 181 - 308 242 - 82 23 6 10.5 14 18.5

5 125 56 164 194 342 - 118 180 255 268 181 - 308 242 - 107 32 7 11.5 15 20

6 150 56 177 207 355 - 144 212 280 268 181 - 308 242 - 135 45 9.5 14.5 17.5 22.5

8 200 60 235 300 428 450 169 262 345 405 217 255 470 290 375 184 67 18 29.5 25 36

10 250 68 259 332 452 476 214 322 405 513 217 255 610 290 375 234 88 30 44 35 48.5

12 300 78 284 357 477 501 249 373 485 516 217 255 612 290 375 279 106 41 61 45 66

14 350 92 318 - 510 535 304 430 530 - 217 255 - 290 375 324 123 - - 72 106

16 400 102 370 - - 587 340 481 600 - - 255 - - 375 374 144 - - 113 156

18 450 114 409 - - 790 408 524 650 - - 437 - - 552 423 163 - - 162 206

20 500 127 441 - - 828 430 583 710 - - 437 - - 552 475 183 - - 189 264

24 600 154 501 - - 889 500 685 820 - - 437 - - 552 573 220 - - 270 362

Valve SizeA B

C

D

E F G

ZN ZF

WeightFlow

ControlLever

StandardGear Unit

Heavy Duty

Gear Unit

WaferFlangeless

WaferLugged

FlowControlLever

StandardGear Unit

Heavy Duty

Gear Unit

FlowControlLever

StandardGear Unit

Heavy Duty



2 50 43 99 129 277 - 65 96 158 176 181 - 216 242 - 24 4 3 4 11 12.5

2½ 65 46 110 140 288 - 78 105 180 176 181 - 216 242 - 46 10 3.5 5 11.5 13

3 80 46 116 146 294 - 85 123 190 176 181 - 216 242 - 62 16 4 8 12 16

4 100 52 134 164 312 - 105 157 216 268 181 - 308 242 - 82 23 6 10.5 14 18.5

5 125 56 164 194 342 - 118 180 255 268 181 - 308 242 - 107 32 7 11.5 15 20

6 150 56 177 207 355 - 144 212 280 268 181 - 308 242 - 135 45 9.5 14.5 17.5 22.5

8 200 60 235 300 428 450 169 262 345 405 217 255 470 290 375 184 67 18 29.5 25 36

10 250 68 259 332 452 476 214 322 405 513 217 255 610 290 375 234 88 30 44 35 48.5

12 300 78 284 357 477 501 249 373 485 516 217 255 612 290 375 279 106 41 61 45 66

14 350 92 318 - 510 535 304 430 530 - 217 255 - 290 375 324 123 - - 72 106

16 400 102 370 - - 587 340 481 600 - - 255 - - 375 374 144 - - 113 156

18 450 114 409 - - 790 408 524 650 - - 437 - - 552 423 163 - - 162 206

20 500 127 441 - - 828 430 583 710 - - 437 - - 552 475 183 - - 189 264

24 600 154 501 - - 889 500 685 820 - - 437 - - 552 573 220 - - 270 362

Valve with Gear Unit

C

F

G

Water Lugged Valve

E

12

Valve SizeA B C D E F G Weight1 Weight2

NPS DN

26 650 292 540 587 890 500 510 513 550 450

28 700 292 600 661 950 500 510 513 680 660

30 750 318 625 686 975 500 510 513 840 720

32 800 318 670 750 1120 700 510 613 965 800

36 900 330 720 785 1170 700 510 613 1180 1075

Dimensions(B16.47 Series A & B or AWWA C207 Class E)

DN 150 to DN 300 DN 350 to DN 600 DN 650 to DN 900

Valve SizeA B C D E F G Weight

NPS DN

6 150 140 177 144 306 175 163 132 35

8 200 152 235 169 429 300 218 217 52

10 250 165 259 214 453 300 218 217 66

12 300 178 284 249 478 300 218 217 106

14 350 190 318 342 512 300 218 217 150

16 400 216 370 377 587 300 271 255 215

18 450 222 410 445 788 578 338 437 225

20 500 229 440 477 820 578 338 437 278

24 600 267 500 547 880 578 338 437 370

Dimensions(ASME B16.5)

1ASME B16.47 Series ‘A’ & AWWA C207 Class E, 2ASME B16.47 Series ‘B’All dimensions in mm and weights in kg

Aquaseal16Integrally-moulded Butterfly Valve - PN 16 (Flanged)

14

Parameter Standard

Valve Design EN 593 (BS 5155), API 609 Cat A, MSS SP-67


End ConnectionWafer Flangeless, Lugged (EN 1092), ASME B16.42 & ASME B16.5 Class150,

BS 4504 PN 10/16, ASME B 16.47 Series A & B, AWWA C 207 Class E

Face-to-FaceEN 558 Series 20 (For 350mm - EN 558 series 25), API 609 Cat A,

MSS SP-67 (Narrow Body), ISO 5752 (Short)

ComplianceStandards


BodySG Iron EN 1563-400/ 18,

Carbon Steel A 216 Gr. WCB

Seat/ Liner Nitrile Rubber, EPDM

Disc

SG Iron EN 1563-400/ 18 with Nylon-coating,

Stainless Steel A351 CF8, CF8M to A 351, CF3M, AB2

ShaftASTM A479 Type 410 with

Xylan® Coating, 17-4 PhBearing Acetal, PTFE, Phosphor Bronze

Valves in other materials available on demand.

AquasealPlusIntegrally-moulded Butterfly Valve - Class 150

Aquaseal Plus Class 150 Integrally-moulded Butterfly Valve is a second generation valve developed to address requirements of modern process, utility and HVAC systems that demand high performance at higher pressures. The highly reliable butterfly valve has successfully completed over 10,000 cycles at its rated pressure.

Available in sizes from 50 mm (2”) to 900 mm (36“), the valve is offered in SG Iron and carbon steel, in a variety of body styles, materials and actuation options. The body seat of Aquaseal Plus Butterfly Valve is vulcanised insitu onto the body, which provides longer life and superior performance when compared to valves with loose liners.



Seat Test Pressure (bar) 22

PressureRating

15

Blowout-proof Shaft

Body

Body Liner

O-Ring

O-Ring

Bottom Shaft

Disc

Feat

ure

s &

Ben

efits

Bearings

Anti-Blow Out Pin

Dowel Pin

Bearing

LongerLifeThe strength of the vulcanised liner as well as its strong bonding with the body ensure that it doesn’t get deformed and torn by the disc during valve operations. Further, friction during operations is minimised owing to the smooth liner surface. The strong seat and reduced friction greatly enhance service life of the valve.

TightSealing,andConsistentLowTorqueBubble-tight sealing is obtained by the tight interference fit between liner and disc. The insitu moulded seat does not deform with age, and hence the operating torque stays low and consistent during the entire life cycle of the valve. High reliability and consistent torque make Aquaseal Plus the ideal valve for actuated systems.

LowerTorque,LongerLifeThe Aquaseal Plus disc is profiled for smoother flow. Further the coating/ encapsulation of Nylon and EPDM on the disc helps to reduce torque and prevent disc damage.

ReliableDriveIn Aquaseal Plus a two-piece shaft is employed for closer control and smooth operation. The shaft is Xylan-coated to reduce friction and improve wear resistance. While the square shaft provides positive drive, the bottom shaft acts as a pivot for operational ease.

AssuredShaftSealingThe flat profiles on the top and bottom of Aquaseal Plus disc engage with matching profiles on the body liner, and the large area of contact prevents leakage to atmosphere. Integrally moulded O-Ring that compresses around the blowout-proof shaft provide a secondary seal. An additional O-Ring which provides tertiary sealing is an Aquaseal Plus hallmark.

EnhancedReliabilityThe rugged body is designed to withstand pipeline stresses and vibrations. Further, enhanced liner thickness assures reliable performance over an extended service. Reinforcements are provided on Aquaseal Plus disc also.


16

Dimensions


Valve with Flow Control Lever

Water Flangeless Valve

AquasealPlusIntegrally-moulded Butterfly Valve - Class 150 (Wafer & Lugged)

Valve SizeA B

C

D

E F G

ZN ZF

WeightFlow

ControlLever

StandardGear Unit

Heavy Duty

Gear Unit

WaferFlangeless

WaferLugged

FlowControlLever

StandardGear Unit

Heavy Duty

Gear Unit

FlowControlLever

StandardGear Unit

Heavy Duty

Gear UnitFlow Control Lever Standard Gear Unit


2 50 43 99 129 277 65 102 158 268 181 320 242 24 4 4 5 12 13

2½ 65 46 110 140 288 78 112 180 268 181 320 242 46 10 5 7 13 15

3 80 46 117 147 294 85 127 190 268 181 320 242 62 16 6 9 14 17

4 100 52 135 165 312 105 162 216 268 181 320 242 82 23 8 11 16 19

5 125 56 164 194 342 118 192 255 268 181 320 242 107 32 11 15 19 23

6 150 56 177 207 355 144 212 280 268 181 320 242 135 45 13 19 21 27

8 200 60 235 302 428 450 169 272 345 508 217 255 620 290 375 184 67 27 37 29 38

10 250 68 259 326 452 476 214 322 405 508 217 255 620 290 375 234 88 36 49 38 50

12 300 78 284 351 477 501 249 377 485 508 217 255 620 290 375 279 106 49 68 50 70

14 350 92 318 510 535 342 432 530 217 255 290 375 324 123 95 120

16 400 102 370 587 377 483 600 255 375 374 144 125 168

18 450 114 409 790 447 526 650 437 552 423 163 160 215

20 500 127 441 828 485 585 710 437 552 475 183 215 300

24 600 154 501 889 556 687 820 437 552 573 220 320 410

Valve SizeA B

C

D

E F G

ZN ZF

WeightFlow

ControlLever

StandardGear Unit

Heavy Duty

Gear Unit

WaferFlangeless

WaferLugged

FlowControlLever

StandardGear Unit

Heavy Duty

Gear Unit

FlowControlLever

StandardGear Unit

Heavy Duty



2 50 43 99 129 277 65 102 158 268 181 320 242 24 4 4 5 12 13

2½ 65 46 110 140 288 78 112 180 268 181 320 242 46 10 5 7 13 15

3 80 46 117 147 294 85 127 190 268 181 320 242 62 16 6 9 14 17

4 100 52 135 165 312 105 162 216 268 181 320 242 82 23 8 11 16 19

5 125 56 164 194 342 118 192 255 268 181 320 242 107 32 11 15 19 23

6 150 56 177 207 355 144 212 280 268 181 320 242 135 45 13 19 21 27

8 200 60 235 302 428 450 169 272 345 508 217 255 620 290 375 184 67 27 37 29 38

10 250 68 259 326 452 476 214 322 405 508 217 255 620 290 375 234 88 36 49 38 50

12 300 78 284 351 477 501 249 377 485 508 217 255 620 290 375 279 106 49 68 50 70

14 350 92 318 510 535 304 432 530 217 255 290 375 324 123 95 120

16 400 102 370 587 340 483 600 255 375 374 144 125 168

18 450 114 409 790 408 526 650 437 552 423 163 160 215

20 500 127 441 828 430 585 710 437 552 475 183 215 300

24 600 154 501 889 500 687 820 437 552 573 220 320 410

17

Water Lugged Valve

Valve with Gear Unit

Valve SizeA B

C

D

E F G

ZN ZF

WeightFlow

ControlLever

StandardGear Unit

Heavy Duty

Gear Unit

WaferFlangeless

WaferLugged

FlowControlLever

StandardGear Unit

Heavy Duty

Gear Unit

FlowControlLever

StandardGear Unit

Heavy Duty



2 50 43 99 129 277 65 102 158 268 181 320 242 24 4 4 5 12 13

2½ 65 46 110 140 288 78 112 180 268 181 320 242 46 10 5 7 13 15

3 80 46 117 147 294 85 127 190 268 181 320 242 62 16 6 9 14 17

4 100 52 135 165 312 105 162 216 268 181 320 242 82 23 8 11 16 19

5 125 56 164 194 342 118 192 255 268 181 320 242 107 32 11 15 19 23

6 150 56 177 207 355 144 212 280 268 181 320 242 135 45 13 19 21 27

8 200 60 235 302 428 450 169 272 345 508 217 255 620 290 375 184 67 27 37 29 38

10 250 68 259 326 452 476 214 322 405 508 217 255 620 290 375 234 88 36 49 38 50

12 300 78 284 351 477 501 249 377 485 508 217 255 620 290 375 279 106 49 68 50 70

14 350 92 318 510 535 342 432 530 217 255 290 375 324 123 95 120

16 400 102 370 587 377 483 600 255 375 374 144 125 168

18 450 114 409 790 447 526 650 437 552 423 163 160 215

20 500 127 441 828 485 585 710 437 552 475 183 215 300

24 600 154 501 889 556 687 820 437 552 573 220 320 410

Valve SizeA B

C

D

E F G

ZN ZF

WeightFlow

ControlLever

StandardGear Unit

Heavy Duty

Gear Unit

WaferFlangeless

WaferLugged

FlowControlLever

StandardGear Unit

Heavy Duty

Gear Unit

FlowControlLever

StandardGear Unit

Heavy Duty



2 50 43 99 129 277 65 102 158 268 181 320 242 24 4 4 5 12 13

2½ 65 46 110 140 288 78 112 180 268 181 320 242 46 10 5 7 13 15

3 80 46 117 147 294 85 127 190 268 181 320 242 62 16 6 9 14 17

4 100 52 135 165 312 105 162 216 268 181 320 242 82 23 8 11 16 19

5 125 56 164 194 342 118 192 255 268 181 320 242 107 32 11 15 19 23

6 150 56 177 207 355 144 212 280 268 181 320 242 135 45 13 19 21 27

8 200 60 235 302 428 450 169 272 345 508 217 255 620 290 375 184 67 27 37 29 38

10 250 68 259 326 452 476 214 322 405 508 217 255 620 290 375 234 88 36 49 38 50

12 300 78 284 351 477 501 249 377 485 508 217 255 620 290 375 279 106 49 68 50 70

14 350 92 318 510 535 304 432 530 217 255 290 375 324 123 95 120

16 400 102 370 587 340 483 600 255 375 374 144 125 168

18 450 114 409 790 408 526 650 437 552 423 163 160 215

20 500 127 441 828 430 585 710 437 552 475 183 215 300

24 600 154 501 889 500 687 820 437 552 573 220 320 410

18

Valve SizeA B C D E F G Weight1 Weight2

NPS DN

26 650 292 540 587 890 500 510 513 550 450

28 700 292 600 661 950 500 510 513 680 660

30 750 318 625 686 975 500 510 513 840 720

32 800 318 670 750 1120 700 510 613 965 800

36 900 330 720 785 1170 700 510 613 1180 1075

Dimensions(B16.47 Series A & B or AWWA C207 Class E)

DN 150 to DN 300 DN 350 to DN 600 DN 650 to DN 900

Valve SizeA B C D E F G Weight

NPS DN

6 150 140 177 144 306 175 163 132 35

8 200 152 235 169 429 300 218 217 52

10 250 165 259 214 453 300 218 217 66

12 300 178 284 249 478 300 218 217 106

14 350 190 318 342 512 300 218 217 150

16 400 216 370 377 587 300 271 255 215

18 450 222 410 445 788 578 338 437 225

20 500 229 440 477 820 578 338 437 278

24 600 267 500 547 880 578 338 437 370

Dimensions(ASME B16.5)

1ASME B16.47 Series ‘A’ & AWWA C207 Class E, 2ASME B16.47 Series ‘B’All dimensions in mm and weights in kg

AquasealPlusIntegrally-moulded Butterfly Valve - Class 150 (Flanged)

19

Parameter Standard

Valve Design EN 593 (BS 5155), API 609 Cat A, MSS SP-67


End ConnectionWafer Flangeless, Lugged (EN 1092), ASME B16.42 & ASME B16.5 Class150,

BS 4504 PN 10/16, ASME B 16.47 Series A & B, AWWA C 207 Class E

Face-to-Face EN 558 Series 20, API 609 Cat A, MSS SP-67 (Narrow Body), ISO 5752 (Short)

ComplianceStandards



BodySG Iron EN 1563-400/ 18,

Carbon Steel A 216 Gr. WCB

Seat/ Liner Nitrile Rubber

Disc

SG Iron EN 1563-400/ 18 with Nylon-coating,

Stainless Steel A351 CF8, CF8M to A 351

Shaft ASTM A479 Type 410

Bearing Acetal, PTFE, Phosphor Bronze


Aquaseal 25 Integrally-moulded Butterfly Valve is a customised second generation valve that addresses requirements of higher pressures systems.

The wafer-type valve is available in sizes from 50 mm (2”) to 200 mm (8“) - in SG Iron and carbon steel, with nitrile rubber and EPDM elastomer options. The liners of Aquaseal 25 Butterfly Valve is vulcanised insitu onto the body, which provides longer life and superior performance when compared to valves with loose liners.


Shell Test Pressure (bar) 37.5

Seat Test Pressure (bar) 27.5

PressureRating

20

Top Shaft

Body

Disc Seal

Retainer Ring

Bottom Cover

Bearings

Bottom Shaft

O-RingNylon Washer

Thrust Plate

Disc

Gear Unit

O-Ring

Keys

Bearings

AquasealMax Large-size Fabricated Steel Butterfly Valve

Aquaseal Max is a fabricated steel butterfly valve developed as an ideal alternate for cast iron butterfly and sluice valves in water distribution systems. The highly reliable valve also finds application in power plants, utility and fire water lines, and HVAC systems. Customised Aquaseal Max can be used to handle air, gases and vacuum services. The valve has successfully under gone Proof of Design (POD) test as per AWWA C 504 and AWWA C 516.

Self-energisingDiscSealThe most unique feature of Aquaseal Max is Autoseal (A), a self-energising disc seal that performs consistently over a wide range of pressures without any adjustment. A retainer ring (B) bolted directly to the disc (C) holds the resilient Autoseal in place. In closed position, line pressure forces Autoseal against the body seat (D) to obtain bi-directional bubble-tight sealing.

AssuredSealingtoAtmosphereDouble O-Rings on the shaft provide reliable sealing to atmosphere. Unlike gland packing, this arrangement does not require any maintenance.

LowerTorque,LongerLifeThe shaft is offset from the seat plane to provide uninterrupted seating surface through 360 degrees. The offset also ensures that disc loses contact with the seat at crack open, and thereby reduces friction and operating torque.

Maintenance-freeBearingsSelf-Lubricated bearings are provided on the shafts.

LighterandStrongerConstructionAquaseal Max body, fabricated from carbon steel plates, has better mechanical and structural properties compared to a cast iron body of the same size and pressure rating. The body also handles piping stresses and misalignments better. Being lighter, the valve is easier to handle, and requires less piping supports, and thus reduces valve installation cost considerably.

Benefits of Autoseal• High integrity sealing, Aquaseal Max is suited for vacuum services• Lower break torque - Saving in valve automation costs• Easy to replace at site

A

D

B C

21

OrderingInformation

Type Operator Body Material Disc Material Shaft Material Seal Material Options

TB G - Gear Operated 2 - IS 2062 2 - IS 2062 4 - SS 410 N - Nitrile

Rubber Eb - Ebonite Lining

E - Electric 4 - SS 304 4 - SS 304 5 - SS 304 E - EPDM LA - Locking Arrangement

A - Pneumatic Double Acting 6 - SS 316 6 - SS 316 6 - SS 316 V - Viton FS&ES - Floor Stand

& Extn. Spindle

H - Pneumatic Spring Return

7 - A 516 Gr. 70

7 - A 516 Gr. 70

CW - Chain Wheel for GU

Y - Hydraulic

Parameter Standard

Valve DesignAWWA C 504, AWWA C 516,

EN 593, ISO 5752

Pressure Testing EN 12266 Part 1&2,

AWWA C 504, AWWA C 516, ISO 5208

Flange DrillingAWWA C 207, BS 4504

EN 1092-1, ASME B 16.5 & 16.47 Class 150, IS 6392

Face-to-Face AWWA C 504, AWWA C 516, EN 558

ComplianceStandards


BodyCarbon Steel IS 2062 Gr. B,

A 36, A 516 Gr. 60/70

DiscCarbon Steel IS 2062 Gr. B,

A 36, A 516 Gr. 60/70

RetainerCarbon Steel IS 2062 Gr. B,

A 36, A 516 Gr. 60/70

Top & Bottom ShaftsStainless Steel A 276 Type 410/ 316/ 304

Body Seat Stainless Steel A 240/182

Type 304/ 304L/ 316

Disc Seal Nitrile Rubber, EPDM, Viton

Bearings Steel Backed PTFE,

SS Backed PTFE, Phosphor Bronze

Thrust Plate Cast Iron IS 210 Gr. FG260

Bottom Cover Cast Iron, Carbon Steel


Specials:• EPDM/ Ebonite-lined valves for sea water applications• Dry shaft for nuclear applications• Special sealing systems for vacuum services• Butt-weld ends

22

Valve SizeA B C D E F Weight

NPS DN

6 150 127 154 175 240 300 270 72

8 200 152 210 225 420 300 270 76

10 250 203 258 245 445 300 270 100

12 300 203 308 270 460 300 270 105

14 350 203 358 315 505 300 270 130

16 400 203 408 340 530 300 270 150

18 450 203 458 365 555 300 270 170

20 500 203 508 390 630 400 315 200

24 600 203 608 440 735 400 290 270

26 650 305 658 465 750 400 290 360

28 700 305 708 490 770 400 290 410

30 750 305 758 585 995 650 415 450

32 800 305 808 615 1020 650 415 530

36 900 305 915 680 1025 600 500 860

40 1000 305 1010 750 1150 600 500 1035

42 1050 305 1060 780 1125 600 500 1110

44 1100 381 1110 790 1360 650 620 1290

48 1200 381 1210 850 1470 650 620 1550

50 1250 381 1260 890 1505 650 620 1700

52 1300 381 1310 910 1530 650 620 1850

54 1350 381 1360 955 1575 650 620 2200

56 1400 381 1410 950 1570 650 620 2480

60 1500 381 1510 1035 1655 650 620 2745

64 1600 457 1610 1090 1665 800 610 3250

72 1800 457 1810 1200 1765 800 610 4000

78 1950 610 1960 1260 1825 900 650 4600

80 2000 610 2010 1325 2050 900 650 5000

84 2100 610 2110 1385 2150 900 650 5400

88 2200 610 2210 1400 2190 900 650 6100

92 2300 610 2310 1590 2325 900 650 6400

94 2350 610 2360 1615 2350 900 650 6730

96 2400 711 2410 1620 2405 1000 820 8950

100 2500 762 2510 1625 2410 1000 820 9300

102 2550 762 2560 1625 2410 1000 820 9600

104 2600 762 2610 1625 2410 1000 820 9750

106 2650 762 2660 1775 2560 1000 820 9900

108 2700 762 2710 1715 2500 1000 820 13200

110 2750 762 2760 1730 2515 1000 820 13520

112 2800 762 2810 1870 2655 1000 820 14840

116 2900 762 2910 2000 2820 1000 1020 16340

120 3000 813 3010 2125 2950 1000 1020 17840

Dimensions-PN6

All dimensions in mm and weights in kg. Please contact us for dimension details of valves in other sizes.

AquasealMax Large-size Fabricated Steel Butterfly Valve

Aquaseal Max is available in sizes up to 120” (3000 mm) in PN 6, PN 10 and PN 16 pressure ratings. Since the valves are of welded construction, the valves can be offered in intermediate sizes to suit customer requirements. Aquaseal Max welding procedures meet ASME Section IX requirements, and welding is carried out by experienced and qualified welders. All longitudinal welds in the valve are butt-welded and subjected to 100% radiography. The acceptance criteria for radiographs are as per ASME Section VIII, Division I.

23

Valve SizeA B C D E F Weight

NPS DN

6 150 127 154 175 370 300 270 72

8 200 152 210 225 420 300 270 76

10 250 203 258 245 445 300 270 100

12 300 203 308 270 460 300 270 125

14 350 203 358 315 505 300 270 150

16 400 203 408 340 530 300 270 180

18 450 203 458 365 555 300 270 185

20 500 203 508 390 630 400 315 230

24 600 203 608 510 795 400 290 385

26 650 305 658 525 825 400 290 460

28 700 305 708 535 865 400 290 540

30 750 305 758 570 975 650 415 580

32 800 305 808 595 950 600 450 750

36 900 305 915 680 1075 700 515 1070

40 1000 305 1010 750 1205 700 515 1250

42 1050 305 1060 775 1240 700 515 1400

44 1100 381 1110 800 1420 650 620 1700

48 1200 381 1210 880 1500 650 620 1950

50 1250 381 1260 890 1810 650 620 2200

52 1300 381 1310 940 1560 650 620 2500

54 1350 381 1360 955 1575 650 620 2900

56 1400 381 1410 985 1605 650 620 3200

60 1500 381 1510 1040 1660 650 620 3600

64 1600 457 1610 1100 1670 800 610 3950

72 1800 457 1810 1190 1765 800 630 4300

78 1950 610 1960 1325 1985 900 650 4865

80 2000 610 2010 1350 2090 900 650 5200

84 2100 610 2110 1400 2110 900 650 5600

88 2200 610 2210 1500 2220 900 650 6400

Dimensions-PN10Valve Size

A B C D E F WeightNPS DN

6 150 140 154 202 395 300 270 76

8 200 152 210 235 430 300 270 80

10 250 203 258 265 460 300 270 110

12 300 203 308 290 470 300 270 140

14 350 203 358 315 505 300 270 185

16 400 216 408 370 560 300 270 200

18 450 222 458 385 665 400 270 250

20 500 229 508 390 670 400 270 300

24 600 267 608 510 795 400 290 430

26 650 280 658 530 835 650 415 500

28 700 292 708 545 1080 650 620 600

30 750 305 758 625 1150 650 620 700

32 800 318 808 650 1175 650 620 820

36 900 330 915 735 1355 650 620 1300

40 1000 410 1010 770 1305 650 620 1500

42 1050 425 1060 805 1335 650 620 1750

44 1100 440 1110 835 1360 650 620 1900

48 1200 470 1210 890 1430 650 620 2350

52 1300 500 1310 950 1485 650 620 2700

56 1400 530 1410 995 1405 650 620 3450

60 1500 560 1510 1040 1555 800 610 4400

64 1600 600 1610 1100 1605 800 610 5000

72 1800 670 1810 1200 1780 800 610 5500

80 2000 930 2010 1350 2090 900 650 6100

Dimensions-PN16


Face-to-face dimensions meet AWWA C504 for sizes DN 350 to DN 350, and DN 750. Valves in other sizes meet EN 558 Series 13.

24

AquasealChekDual-plate Check Valve

Aquaseal Chek Valve is a soft-seated dual-plate check valve that conforms to API 594. The valve with cast iron body is available in sizes 2” (50 mm) to 8” (200 mm), in PN 10, PN 16 and ASME Class 125 pressure ratings.

Features&Benefits• Patented retainer-less design - High integrity

sealing, facilitates quick disassembly at site.• Two independent seats - Consistent sealing

even in uneven flow.• Raised profile of the soft seat enhances

sealing.• Integrally moulded liner. • Stopper pin prevents the discs from coming

into contact with each other and thus prevents disc damage. The stopper pin also prevents spring failure by ensuring that the discs don’t travel beyond the full-open position.

• For sizes 6” and above, lifting eyebolt option is provided.

• Drain connections provided on demand.

BodyStopper Pin

Hinge Pin

Bracket

Spring

Spacer

Bearing Washer

Closure PlateSeat

25

DimensionsValve Size

A B C D WeightNPS DN

2 50 54 109 64 99 4

3 80 67 144 92 132 7

4 100 67 164 116 156 10

6 150 95 220 172 211 16

8 200 127 275 221 266 27


ComplianceStandardsParameter Standard

Valve Design API 594

Pressure Testing PN 10 & PN 16 EN 12266 Part 1

Class 125 API 598

End ConnectionPN 10 & PN 16 EN 1092

Class 125 ASME B16.1

Face-to-Face PN 10, PN 16 & Class 125 API 594


Body Cast Iron EN1561 (BS 1452) Gr. 200

Seat EPDM

Closure Plate Stainless Steel A 217 Gr. CA15

Bracket Stainless Steel A 240 Type 410

Hinge Pin Stainless Steel A 276 Type 410

Stopper Pin Stainless Steel A 276 Type 410

Bearing Washer Stainless Steel A 276 Type 410

Spring Stainless Steel 316

Spring Spacer Stainless Steel A 276 Type 410

Set Screw Stainless Steel A 276 Type 316

Identification Plate Steel

26

AquasealFabChekFabricated Steel Check Valve

Aquaseal Fab Chek Fabricated Steel Check Valve compliments Aquaseal Max Large-size Fabricated Steel Butterfly in water distribution systems and power plants. The valve is fabricated from carbon steel plates, and body and disc seats are hard-faced using 13% Cr steel.

Smooth closure of the valve is ensured by using a counter weight. The valve can be supplied with hydraulic dash pot to prevent disc slamming and water hammer. Automated Fab Chek can also be used as combined shut-off and non-return valve on pump discharge lines.

The valve is available in PN 6, PN 10 and PN 16 pressure ratings, with flanged ends.

Parameter Standard

Valve Design Manufacturer’s Standard

Leakage Rate EN 12266 Leakage Rate E

Face-to-Face EN 558 Series 14

Flange DrillingAWWA C 207, BS 4504

EN 1092-1, ASME B 16.5 & 16.47 Class 150, IS 6392

ComplianceStandards

Components Materials

BodyCarbon Steel IS 2062 Gr. B with

13% Chromium Steel on Seating Surface

DiscCarbon Steel IS 2062 Gr. B with

13% Chromium Steel on Seating Surface

Top Shaft Stainless Steel A 276 Type 410

Bottom Shaft Stainless Steel A 276 Type 410

Bearings Phosphor Bronze

Bottom Cover Cast Iron IS 210 Gr. FG 260 or Carbon Steel IS 2062 Gr. B

MaterialsofConstruction


27

Valve SizeA B C D Weight

NPS DN

12 300 270 400 375 240 210

14 350 290 510 480 275 300

16 400 310 540 510 305 380

18 450 330 540 550 355 420

20 500 350 610 580 355 450

24 600 390 660 665 430 730

26 650 410 660 715 460 760

28 700 430 725 740 500 795

30 750 450 900 805 300 860

32 800 470 900 835 560 900

36 900 510 1050 850 615 960

40 1000 550 1220 970 650 1070

Dimensions-PN10

Valve in Close Position Valve in Open Position

Valve SizeA B C D Weight

NPS DN

12 300 270 450 425 240 240

14 350 290 540 490 310 310

16 400 310 610 560 315 325

18 450 330 610 560 360 385

20 500 350 660 650 425 450

24 600 390 725 700 440 585

26 650 410 900 775 520 690

28 700 430 1050 805 535 760

30 750 450 1050 825 555 835

32 800 470 1050 835 560 900

36 900 510 1050 850 650 1150

40 1000 550 1220 970 705 1300

Dimensions-PN16

All dimensions in mm and weights in kg. Please contact us for dimension details of valves in other sizes and pressure rating.

L&T Valves LimitedMount - Poonamallee Road, Manapakkam, Chennai 600 089, INDIATel. : + 91 44 2252 9855 Fax: +91 44 2252 9870 [email protected] www.Lntvalves.comCIN: U74999MH1961PLC012188

Publication Number: VC005-R3/0216As we continuously endeavour to improve our products, the data given herein is subject to change. Please refer www.Lntvalves.com for the latest catalogue.

OrderingInformationAquaseal Integrally-moulded Butterfly Valves

Pressure Rating

Body Material

Body Style Liner Disc Shaft Operator Special

1 - PN 10 I - Cast Iron W - Wafer N - Black Nitrile I - Cast Iron

C - Carbon Steel (EN 8)

L - Lever Long Neck

2 - PN 16 G - SG Iron L - Lugged E - EPDM G - SG Iron S - SS 410 G - Gear UnitExtended

Stem

3 - Cl. 150C - Carbon

SteelF - Flanged V - Viton 4 - SS 304 (CF8) 4 - SS 304 M - Motorised

Locking Arrangement

4 - PN 254 - SS 304

(CF8)H - Hypalon 6 - SS 316

(CF8M) 5 - 17-4 Ph D - Double Acting Pn. Act. Limit Switch

6 - SS 316 (CF8M)

S - Silicon A - Al Bronze 6 - SS 316 S - Spring Return Pn. Act.

Chain-wheel Operator

W - White Nitrile C - Carbon Steel M - Monel B - Bare Shaft

Pn. Act. - Pnuematic Actuator

�

��

�

�

��

� �� !� ��

��"�� #�� "��

��$�� %�� %�� &� �� & �$��

��

'��

�!� �� (�� )*�� + �� ),��-...�/� ��

�� $�� %��0��#��

�� !� � � �� $�� %��)-�

��1�� %��

'�� 2$��3,)) ��

�� 4�� % �� /'�56��7892:89��#*-3; �

�� 9�� '��'��

� $�� '��'�� '��

� '��)*..��

� !�� '��

� '��<�#.��#.� %��

�� =� 5��*��! �� =� �,..��*..�4� �� =� '��7�� ;�

/�� 4�� = $�� = >��'��'��9�� $�� = 4��$� �

Page 1 of 3Pneumatic Actuators manufactured in India by Elomatic

2/1/2013http://www.poonawallagroup.com/elomatic/contents/pne.htm

?�� = @ ��4�� 4��

6��7$��; =�=4�� "'"�� $�� '��

�� 7$��; = A) 3.��. 3.��A).�� = ?�� '�� = 3�..�...��

��

��

��

��

��

�),� )- 0� ). #� 1 3� 1 ,� - 0�

�,3� ,1� )#� -� ,)� )#�

�-.� 3)� ,3� *� -.� ,3�

�)..� ))3� 3*� ,)� **� 33�

�,..� ,3)� ),3� -)� )A0� ),#�

�#3.� -#0� ,.0� 0#� #-1� ,,#�

�0..� 1-)� #0-� ))-� 3*-� #01�

�A3.� )).1� 33-� )1-� *0A� 3#*�

�)0..� )*,A� A.1� #.3� )-,)� *A1�

�#,.. #-A0 )31. -). ,A*. )*).

�0.� 0A� -,� ,,� --� ,3�

�)3.� )1-� ).A� 03� ).,� 3A�

�,*.� #,A� )A3� 10� ,#0� ),.�

�3..� 3*)� #*,� ).,� --*� )1A�

�13.� *0-� 3*,� ,)1� 0.3� ,3#�

�))..� ),1-� *#-� -,A� 1A)� #A0�

�,3..� ,A,,� )0##� A-1� )*-A� ))0.�

�-...� -A3-� ,11*� )0,.� #),.� )A3*�

�

��

�

�

�� !�� "#�� "$�� %#�� %$��

�),�� ).#�� ))*�� 0.�� ,.�� 0.�� A�� -,�� 0%*��

�,3�� )#3�� )1*�� *)�� ,.�� *#�� ))�� 3.�� 0%A��

�-.�� )-1�� ,.-�� A3�� ,.�� A1�� )-�� 3.�� 1.�� 0%A�� *%).��

�)..�� )10�� ,01�� ))*�� ,.�� ))1�� )A�� 3.�� 1.�� 0%A�� *%).��

�,..�� ,#1�� #0.�� )-#�� ,.�� )#1�� ,,�� 1.�� ).,�� *%).�� ).%),��

�#3.�� #.3�� #*1�� )*)�� ,.�� )*,�� ,1�� 1.�� ).,�� *%).�� ).%),��

�0..�� #*1�� -11�� ,,.�� #.�� ,)1�� ,1�� ).,�� ),3�� ).%),�� ),%)3��

�A3.�� -,-�� 3)1�� ,3A�� #.�� ,-,�� #0�� ).,�� )-.�� ).%),�� )0%,.��

�)0..�� 3)0�� 31.�� ,A1�� #.�� ,13�� -0�� )03�� ,.%,3��

�#,.. 3-. 0-, #30 #. #,0 33 )03 ,3- �,.%#3%-� �)0%,3%*�

�0.�� )33�� )*-�� ).)�� ,.�� )).�� )-�� 3.�� 1.�� 0%A�� *%).��

�)3.�� )*0�� ,)1�� )#3�� ,.�� )--�� )A�� 1.�� ).,�� *%).�� ).%),��

�,*.�� ,#,�� #),�� )0.�� ,.�� )1#�� ,,�� 1.�� ).,�� *%).�� ).%),��

�3..�� ,1)�� #3,�� )A.�� #.�� ,.0�� ,1�� ).,�� ),3�� ).%),�� ),%)3��

�13.�� ,*3�� #**�� ,#-�� #.�� ,33�� ,1�� ).,�� ),3�� ).%),�� ),%)3��



�))..�� #-.�� -1*�� ,-1�� #.�� ,0)�� #0�� )-.�� )0%,.��

�,3..�� #*.�� 30*�� #0.�� #.�� #0.�� -0�� )03�� ,.%,3��

�-...�� -A*�� *#3�� #*.�� #.�� #A.�� 33�� ,3-�� )0�%�,.�%�*� ��

4��B�,.),��'!24�7�2��;��



C O N T R O L S , I N C .

VERSATILE LIMITSWITCH

1

2

1A Honeywell SPDT Mech, AC/DC, 10A

11A Honeywell SPDT Mech, AC/DC, 15A

2A P & F Prox - IS, DC, 8mA

12A P & F Prox - IS, DC, 100mA

22A P & F Prox - Non IS, DC, 100mA, LED

32A P & F Prox - Non IS, DC,100mA

42A P & F Prox - Non IS, AC, 200mA

2C Ifm Prox - IS, DC, 8 mA

12C Ifm Prox - Non IS, DC,150mA, LED

3A P & F Prox - IS, DC, 3 mA

13A P & F Prox - Non IS, DC, 100mA

3C Ifm Prox - Non IS, DC, 200mA

13C Ifm Prox - IS, DC, 8mA

23C Ifm Prox - Non IS, AC/DC, 100 mA

5A Honeywell DPDT Mech, AC/DC, 10A

15A Honeywell DPDT Mech, AC/DC, 15A

5B Cherry DPDT Mech, AC/DC, 5A

15B Cherry DPDT Mech, AC/DC, 15A

6A Hermitic Sealed Prox, AC/DC, 2A

16A Hermitic Sealed Prox, AC/DC, 2A

MAKECODE TYPE

Series Switch Qty. Switches Conduit Entry

DXLWWeatherproof

DNLFExplosion Proof

Body/Cover

B Aluminum-Black

Y Yellow

L Blue

B5 CF8M Stainless Steel

Aluminum-

Aluminum-

Entry Threads DXLW DNLF

4R ½” NPT áP

6R ¾” NPT Oá

3M M20X1.5 PP

Standard Stock Items

BKS1 SS 80 X 30 X 20mm

BKC1 CS 80 X 30 X 20mm

BKS2 SS 80 X 30 X 30mm

BKC2 CS 80 X 30 X 30mm

BKS3 SS 130 X 30 X 30mm

BKC3 CS 130 X 30 X 30mm

BKS4 SS 130 X 30 X 50mm

BKC4 CS 130 X 30 X 50mm

Bracket Certificates

U CU , ULL L

C CE

A ATEX

CM CMRI

CC CMRI CCOE

Limit Switch Ordering Code Options

Specifications are subject to change without notice1


Bracket for Rotex Actuatormodels ECV200 through

ECV350

Bracket for Rotex Actuatormodels ECV50 through

ECV175

Brackets are supplied with fasteners for top and

bottom, to fit standard actuator ISO threads.

Mounting Bracket Ordering Code Options

ISO-1 30mm X 80mm X 20mm

CODE BRACKET MATERIAL

BKS1 304 SS

BKC1 STEEL, Powder Coated



BKS2 304 SS




BKS3 304 SS




BKS4 304 SS



57SQ

35.4SQ.Ø6 HOLES-4Nos.

Ø9 HOLES-4Nos.

110

80

20

45

3

Ø6

110 3

45

55

10

80Ø6

30

160

30

45

55

10

3

130Ø6

130Ø6

160

30

30

45

75

3




FEATURES

• Stainless Steel CF8M housing

• Shatterproof Polycarbonate Dome

• Easily settable colour coded cam

• The locked Serrated cams, ensures the secured settings against any vibration

• The switch box confirms to Ex d IIC, T6 Highest level of safety

• Cable entry M20, 1/2” NPT or 3/4” NPT

• A special PCB, eliminates all the wiring from the switch element to the terminals. Complete protection against short circuit.

• All fasteners in stainless steel

• Additional mounting hole is threaded as per the UNC series

• ATEX, certified by Baseefa United Kingdom Certification no. Baseefa09ATEX0126

• UL Certified confirms to file no. Ul1203 and UL508, File no. 246615

• Temperature range -20 °C to +80 °COn request -40 °C to +80 °C, -60 °C to +80 °C,-20 °C to +120 °C

• Cable entryDual cable entryOptional 4 cable entry

• IP 67 : Water, Rain and Dust Proof

• IP 68 : Upto 100m on request

NEMA 4, 4X, 7 & 9 CLASS I, GROUP C & D,CLASS II, GROUP E, F & G, DIVISION 1 & 2

EC94/9 Ex d, IIC, T6EN/IS/IEC 60079-0,EN/IS/IEC 60079-1

DOME

Unique “two piece” dome arrangement. The blackplastic makes the transparent dome an integral part.This ensure an extra long life

Standard dome Only segment is transperentrest all is black

90°270°

3 Way dome

DNLF - Explosion Proof Switch Boxes To Enhance

The Performance Of Valve Automation Systems



ORDERING OPTIONS

DXLW1-Weather Proof SPDT Mechanical Switch

• Aluminum die cast enclosure, powder coated for superiorcorrosion resistance

• Weather proof enclosure to IP67• Enclosure Certified by UL to UL508, File No. E249752• Poly carbonate Dome, Shatterproof• Red and Yellow Indicator• Color coded cams easy to identify, and easy to set• Serrated cams locked together ensures adjusted settings

secured against any vibration• Special circuit board eliminates internal wiring• Circuit board laminated for complete corrosion protection• Solenoid termination inside the switch box is standard• Three conduit entries provided as standard• Conduit entry options : ½” NPT, M20X1.5• Complies to Namur mounting standard• Temperature range 4°F to 146°F• Bracket available as option

FEATURES

• DXLW-1A2-4R-B-BKS1-U

• Weather proof switch box provided with (2) Honeywell 10 Amp switches, ½” NPT conduit entry, black enclosure. Withstainless steel bracket suitable for 80X30 tapping and for 20mm pinion, UL approved.

ORDERING EXAMPLE

1

2


4R ½” NPT

3M M20X1.5

CertificatesBracket

Refer to BracketSelection Page

DXLW

MAKECODE MODEL RATING

1A Honeywell V5C010EN3D 10Amp120 or 250 VAC, 220 VDC50Hz/60Hz, NO/NC

11A Honeywell V7 1C17E9 201 15Amp120 or 250 VAC, 220 VDC50Hz/60Hz, NO/NC

U CU , ULL L

C CE

B Aluminum-Black

Y Yellow

L Blue


Aluminum-

Aluminum-

Body/Cover



MATERIAL OF CONSTRUCTION

Valve open BOTTOMYellow cam SWITCH

Valve closed TOPRed cam SWITCH

SOLENOID VALVE

GND

PN

GND

PN

SOLENOIDCONTROLSIGNAL

COMNONCCOMNONC

COMNO

NC

COMNO

NC

10

9

19

62

15411

83

1

17

14

5

12

20

7

16

18

13

13

6.5

4

429

A/F4Ø12

SQ.575/16UNC-4NOS.

M6-4NOS.

SQ.35.4

120

105

DIMENSION NPTM20X1.5

‘X’-½”

X

DXLW1-Weather Proof SPDT Mechanical Switch

CROSS SECTION

20 COVER FOR MICROSWITCH 1 POLYAMIDE19 ‘O’RING 1 NBR18 CIRCUIT BOARD 1 -17 ‘O’RING 1 NBR16 PAD 1 POLYAMIDE15 SPRING 1 STAINLESS STEEL14 ‘E’ TYPE CIRCLIP 1 SPRING STEEL13 NON FALLING SCREW 4 STAINLESS STEEL12 SCREW FOR MICROSWITCH 2 STAINLESS STEEL11 GASKET 1 NBR10 INDICATOR COVER 1 POLYCARBONATE9 INDICATOR 1 ABS PLASTIC8 THREE WAY TERMINAL BLOCK 4 -7 MICROSWITCH (SPDT) 2 HONEYWELL/CHERRY6 SPRING DOWEL 2 SPRING STEEL5 SHAFT 1 STAINLESS STEEL4 CAM-LOCK 2 DELRIN3 CAM 2 POLYCARBONATE2 COVER 1 ALUMINUM ALLOY LM-61 HOUSING 1 ALUMINUM ALLOY LM-6

S.NO. DESCRIPTION QTY. MATERIAL

DIMENSION DETAILS WIRING DIAGRAM



FEATURES

• Intrinsically safe • Cylindrical inductive proximity sensors (EExia) • Aluminum die cast enclosure, powder coated for superior

corrosion resistance • Weather proof enclosure to IP67 • Switch box conforms to UL50S,UL File No. E249752 • Polycarbonate Dome, Shatterproof • Red and Yellow Indicator• Color coded cams easy to identify, and easy to set• Solenoid termination inside the switch box is standard• Serrated cams locked together ensures adjusted settings

secured against any vibration • Three conduit entries provided as standard • Conduit entry options: ½” NPT, M20X1.5 • Complies to Namur mounting standard • Temperature range 4°F to 146°F • Bracket available as option

DXLW2-Weather Proof Cylindrical Prox Switch

With Option for Intrinsically Safe Switch

ORDERING OPTIONS

• DXLW-12A2-4R-B-BKS1 U

• approved, Weather proof box provided with (2) PEPPERL+FUCHS switches, DC output, each with one NO, ½” NPTconduit entries, black enclosure. With Stainless Steel bracket suitable for 80X30 tapping and for 20mm pinion height. UL

ORDERING EXAMPLE

1

2


4R ½” NPT

3M M20X1.5

Certificates

U CU , ULL L

C CE

Bracket


DXLW

MODEL RATINGMAKECODE

2A P & F NJ2 12 GMN 8 VDC, NC

12A P & F NCB2 12GMN35 NO 8V, 24V, 100 mA, NO IS

22A P & F NBN4 12GMN40 Z0 6V-24V, 100 mA, NO IS

32A P & F NCN4 12GMN35 NO 8 VDC, NC

42A P & F NJ4 12GM50 WO 220VAC 200mA 50/60Hz, NC

2C Ifm NF 5003 8 VDC, NC IS

12C Ifm IF 5718 24VDC, 150mA, NO/NC

B Aluminum-Black

Y Yellow

L Blue


Aluminum-

Aluminum-

Body/Cover




2 WIRE PROXIMITY-NO

2 WIRE PROXIMITY-NC

SOLENOID VALVE

GND

PN

SOLENOID SIGNAL CONTROL

GND

PN

SOLENOID VALVE SOLENOIDCONTROLSIGNAL

GND

PN

GND

PN

NOI

BU -

BN +

COMNONC

COMNONC

BU -

BN +I

NO



13

6.5

4

29 4

A/F4Ø12

5/16UNC-4NOS.

M6-4NOS.

X

10

5

SQ.35.4

120

DIMENSION ‘X’-½” NPTM20X1.5

SQ.57

DXLW2-Weather Proof Cylindrical Prox Switch

MATERIAL OF CONSTRUCTION

10

9

6

2

15

411

81 3

17 14

5

13

7

16

1812

CROSS SECTION

20 COVER FOR MICROSWITCH 1 POLYAMIDE19 ‘O’RING 1 NBR18 CIRCUIT BOARD 1 -17 ‘O’RING 1 NBR16 PAD 1 POLYAMIDE15 SPRING 1 STAINLESS STEEL14 ‘E’ TYPE CIRCLIP 1 SPRING STEEL13 NON FALLING SCREW 4 STAINLESS STEEL12 SCREW FOR MICROSWITCH 2 STAINLESS STEEL11 GASKET 1 NBR10 INDICATOR COVER 1 POLYCARBONATE9 INDICATOR 1 ABS PLASTIC8 THREE WAY TERMINAL BLOCK 4 -7 2 P & F, iFM6 SPRING DOWEL 2 SPRING STEEL5 SHAFT 1 STAINLESS STEEL4 CAM-LOCK 2 DELRIN3 CAM 2 POLYCARBONATE2 COVER 1 ALUMINUM ALLOY LM-61 HOUSING 1 ALUMINUM ALLOY LM-6

PROXIMITY SENSOR


BU -

BN +

BU -

BN +

SAFE AREA

POWERSUPPLY

NCCOMNO

NCCOMNO

NO

T IN

RO

TE

X S

CO

PE

Ex ia BARRIER



NC BU -

HAZARDOUS AREA

IBN +

NC BU -I

BN +

COMNONC

COMNONC



DXLW3-Weather Proof Flat Type Prox Switch


• Intrinsically safe • Flat type inductive proximity sensors (EExia) • Aluminum die cast enclosure, powder coated for superior corrosion

resistance • Weather proof enclosure to IP67 • Enclosure Certified by UL to UL50S, UL File No. E249752 • Polycarbonate Dome, Shatterproof • Red and Yellow Indicator• Color coded cams easy to identify, and easy to set• Serrated cams locked together ensures adjusted settings secured

against any vibration • Special circuit board eliminates internal wiring• Circuit board laminated for complete corrosion protection• Solenoid termination inside the switch box is standard• Three conduit entries provided as standard • Conduit entry options: ½” NPT, M20X1.5 • Complies to Namur mounting standard • Temperature range 4°F to 146°F • Bracket available as option

FEATURES

ORDERING OPTIONS

• DXLW-13A2-4RY-BKS1-U

• approved, Weather proof box provided with (2) PEPPERL+FUCHS flat switches, DC output, each with one NO, ½” NPTconduit entries, yellow enclosure. With Stainless Steel bracket suitable for 80X30 tapping and for 20mm pinion height. UL

ORDERING EXAMPLE


3A P & F

13A P & F

3C Ifm

13C Ifm 8 VDC, NO/NC IS

23C Ifm

NJ2 V3N 8 VDC, 3mA, NC IS

NBB3 V3 Z4 10-60VDC, 100mA, NO

IS 5026 24V, 200 mA, NO/NC

NS 5002

IN 0073 24VDC, 150mA, NO/NC

1

2


4R ½” NPT

3M M20X1.5

Certificates

U CU , ULL L

C CE

Bracket


DXLW B Aluminum-Black

Y Yellow

L Blue


Aluminum-

Aluminum-

Body/Cover



22 PHILIPS HEAD SCREW21 CAP FOR SENSOR 2 STAINLESS STEEL20 COVER FOR MICROSWITCH 1 POLYAMIDE19 ‘O’RING 1 NBR18 CIRCUIT BOARD 1 -17 ‘O’RING 2 NBR16 PAD 1 POLYAMIDE15 SPRING 1 STAINLESS STEEL14 ‘E’ TYPE CIRCLIP 1 SPRING STEEL13 NON FALLING SCREW 2 STAINLESS STEEL12 SCREW FOR MICROSWITCH 2 STAINLESS STEEL11 GASKET 1 NBR10 INDICATOR COVER 1 POLYCARBONATE9 INDICATOR 1 ABS PLASTIC8 THREE WAY TERMINAL BLOCK 2 -7 2 P & F, iFM6 SPRING DOWEL 2 SPRING STEEL5 SHAFT 1 STAINLESS STEEL4 CAM-LOCK 2 DELRIN3 CAM 2 POLYCARBONATE2 COVER 1 ALUMINUM ALLOY LM-61 HOUSING 1 ALUMINUM ALLOY LM-6

2 STAINLESS STEEL

PROXIMITY SENSOR


2 WIRE PROXIMITY-NO


GND

PN

GND

PN

2 WIRE PROXIMITY-NC

SOLENOID VALVE

GND

PN

SOLENOID CONTROLSIGNAL

GND

PN

NOI

BU -

BN +

COMNONC

COMNONC

BU -

BN +I

NO



NC BU -

HAZARDOUS AREA

IBN +

NC BU -I

BN +

COMNONC

COMNONC

BU -

BN +

BU -

BN +

SAFE AREA

POWERSUPPLY

NCCOMNO

NCCOMNO

NO

T IN

RO

TE

X S

CO

PE

Ex ia BARRIER



9

10

19

12 2

11

20

16

6

7

213

4

117

14

5

18

8

15

13

13

6.5

29 4

4 Ø12A/F4

5/16UNC-4NOS.

M6-4NOS.

X

10

5

SQ.35.4

120

DIMENSION ‘X’-½” NPTM20X1.5

SQ.57

DXLW3-Weather Proof Flat Type Prox Switch

MATERIALS OF CONSTRUCTION CROSS SECTION




DNLF1-Explosion Proof SPDT Mechanical Switch

• DNLF-1A2-6R-B-BKS1-U

• Explosion proof to I, II A and II B and Weather proof box provided with Honeywell 15 Amps switches 2 nos, each with one NO and one NC, 3/4” NPT cable gland entry. With Stainless Steel bracket, 80X30 tapping, 20mm pinion height, UL approved.

ORDERING EXAMPLE

• Explosion proof to l, IIA, IIB, and IIC• Enclosure Certified by UL to UL 1203 and UL 508, File No.

E246615• Switch Box conforms to Ex D IIC, T6 highest level of safety• ATEX Certified by CESI, Italy, Certification No. CESI 05

ATEX017• Aluminum die cast enclosure, powder coated for superior

corrosion resistance• Weather proof enclosure to lP67 • Polycarbonate Dome, Shatterproof• Red and Yellow Indicator• Color coded cams easy to identify, and easy to set• Serrated cams locked together ensures adjusted settings

secured against any vibration • Special circuit board eliminates internal wiring• Circuit board laminated for complete corrosion protection• Solenoid termination inside the switch box is standard• Two conduit entries provided as standard• Conduit entry options: ½” NPT, ¾” NPT, M20X1.5• Complies to Namur mounting standard• Temperature range 4°F to 146°F• Bracket available as option

FEATURES

ORDERING OPTIONS

1

2

Series Switch Qty. Switches Conduit Entry Bracket


Certificates

DNLF 4R ½” NPT

6R ¾” NPT

3M M20X1.5




1B Cherry D43 CQ1 RA 5Amp125 or 250 VAC, 220 VDCNO/NC


U CU , ULL L

C CE

A ATEX

CM CMRI

CC CMRI CCDE

B Aluminum-Black

Y Yellow

L Blue


Aluminum-

Aluminum-

Body/Cover



SOLENOID VALVE

GND

PN

GND

PN


COMNONCCOMNONC

COMNO

NC

COMNO

NC



15

4

29

4

Ø129659

155

SQ.57

SQ

.35.

4

5/16” UNC4 NOS.

14

8

M6-4 NOS.

½” NPT or¾” NPT orM20 X 1.5

3

22

21

14

7

16

17

19

1815

13 8

1

20

11

246

10

9

5

12

MATERIAL OF CONSTRUCTION CROSS SECTION

DNLF1-Explosion Proof SPDT Mechanical Switch

2221 PHILIPS HEAD SCREW 4 STAINLESS STEEL20 SCREW FOR EARTHING 2 STAINLESS STEEL19 CIRCUIT BOARD 1 -18 ‘O’RING 2 NBR17 PAD 1 POLYAMIDE16 SPRING 1 STAINLESS STEEL15 ‘E’ TYPE CIRCLIP 1 SPRING STEEL14 SCREW FOR COVER 8 STAINLESS STEEL13 SCREW FOR CONN. STRIP 2 STAINLESS STEEL12 SCREW FOR MICROSWITCH 2 STAINLESS STEEL11 GASKET 1 NBR10 INDICATOR COVER 1 POLYCARBONATE9 INDICATOR 1 ABS PLASTIC8 CONNECTOR STRIP-6WAY 1 POLYMIDE7 MICROSWITCH (SPDT) 2 HONEYWELL/CHERRY6 SPRING DOWEL 2 SPRING STEEL5 SHAFT 1 STAINLESS STEEL4 CAM-LOCK 2 POM3 CAM 2 POLYCAMIDE2 COVER 1 ALUMINUM ALLOY LM-61 HOUSING 1 ALUMINUM ALLOY LM-6

‘O’RING 1 NBR



DIMENSION ‘X’ OPTIONS : ½” NPT¾” NPTM20X1.5



DNLF2-Explosion Proof Cylindrical Prox Switch


• Intrinsically safe • Cylindrical inductive proximity sensors (Eexia) • Aluminum die cast enclosure, powder coated for superior

corrosion resistance • Weather proof enclosure to IP67• Switch box conforms to Ex d llC, T6 highest level of safety• Explosion proof to l, IIA, IIB , and IIC • ATEX certified by CESI, ltaly, Certification No. CESI 05 ATEX017• ATEX as per EN 60079 • UL Certified, conforms to UL 1203 & UL 508, File No. 246615• Polycarbonate Dome, Shatterproof • Red and Yellow Indicator• Color coded cams easy to identify, and easy to set• Solenoid termination inside the switch box is standard• Serrated cams locked together ensures adjusted settings

secured against any vibration• Two conduit entries provided as standard• Conduit entry options ½” NPT, ¾” NPT, M20X1.5 • Temperature range 4°F to 146°F• Bracket available as option

FEATURES

ORDERING OPTIONS

• DNLF-12A2-4R-BU

• approved, Explosion proof box with (2) +FUCHS switches, DC output, ½” NPT conduit entry, black enclosure. UL PEPPERL

ORDERING EXAMPLE

1

2



Certificates

DNLF 4R ½” NPT

6R ¾” NPT

3M M20X1.5


2A P & F NJ2 12 GMN 8 VDC, NC IS

12A P & F NCB2 12GMN35 NO 8V, 24V, 100 mA, NO IS

22A P & F NBN4 12GMN40 Z0 6V-24V, 100 mA, NO

32A P & F NCN4 12GMN35 NO

42A P & F NJ4 12GM50 WO 220VAC 200mA 50/60Hz, NC

2C Ifm NF 5003 8 VDC, NC IS

12C Ifm IF 5718 24VED, 150mA, NO/NC

8V, 24V, 100mA, NC

U CU , ULL L

C CE

A ATEX

CM CMRI

CC CMRI CCDE

B Aluminum-Black

Y Yellow

L Blue


Aluminum-

Aluminum-

Body/Cover

13Specifications are subject to change without notice


2120 NON FALLING SCREW 8 STAINLESS STEEL19 ‘O’RING 1 NBR18 ‘O’RING 2 NBR17 BRACKET 1 M.S.16 SPRING 1 STAINLESS STEEL15 ‘E’ TYPE CIRCLIP 1 SPRING STEEL14 SCREW FOR EARTHING 2 STAINLESS STEEL13 SCREW FOR CONN. STRIP 2 STAINLESS STEEL12 SCREW FOR BRACKET 2 STAINLESS STEEL11 GASKET 1 NBR10 INDICATOR COVER 1 POLYCARBONATE9 INDICATOR 1 ABS PLASTIC8 TERMINAL BLOCK-6WAY 1 -7 PROXIMITY SENSOR 2 P&F, iFM6 SPRING DOWEL 2 SPRING STEEL5 SHAFT 1 STAINLESS STEEL4 CAM-LOCK 2 DELRIN3 CAM 2 POLYCARBONATE2 COVER 1 ALUMINUM ALLOY LM-61 HOUSING 1 ALUMINUM ALLOY LM-6

PHILIPS HEAD SCREW 4 STAINLESS STEEL


2 WIRE PROXIMITY-NC

SOLENOID VALVE

GND

PN

SOLENOID CONTROL SIGNAL

GND

PN

2 WIRE PROXIMITY-NO


GND

PN

GND

PN

NOI

BU -

BN +

COMNONC

COMNONC

BU -

BN +I

NO



NC BU -

HAZARDOUS AREA

IBN +

NC BU -I

BN +

COMNONC

COMNONC

BU -

BN +

BU -

BN +

SAFE AREA

POWERSUPPLY

NCCOMNO

NCCOMNO

NO

T IN

RO

TE

X S

CO

PE

Ex ia BARRIER



15

4

29

4

59

155

96Ø12


SQ.575/16”UNC4 NOS.

SQ

.35.

4

14

8

M6-4 NOS.


DNLF2-Explosion Proof Cylindrical Prox Switch



3

19

20

17

12

15

18

13

81

16

4

14

7

11

6

2

21

109

5



DNLF3-Explosion Proof Flat Prox Switch


• Intrinsically safe • Flat inductive proximity sensors (Eexia) • Aluminum die cast enclosure, powder coated for superior

corrosion resistance • Weather proof enclosure to IP67• Switch box conforms to Ex d llC, T6 highest level of safety• Explosion proof to l, IIA, IIB , and IIC • ATEX certified by CESI, ltaly, Certification No. CESI 05 ATEX017• ATEX as per EN 60079 • UL Certified, conforms to UL 1203 & UL 508, File No. 246615• Polycarbonate Dome, Shatterproof • Red and Yellow Indicator• Color coded cams easy to identify, and easy to set• Solenoid termination inside the switch box is standard• Serrated cams locked together ensures adjusted settings

secured against any vibration • Two conduit entries provided as standard• Conduit entry options ½” NPT, ¾” NPT, M20X1.5 • Temperature range 4°F to 146°F• Bracket available as option

FEATURES

ORDERING OPTIONS

• DNLF-3A2-4R-BU

• approved, Explosion proof box with (2) +FUCHS switches, Intrinsicaly safe, ½” NPT conduit entry, black enclosureUL PEPPERL

ORDERING EXAMPLE

1

2



Certificates

DNLF 4R ½” NPT

6R ¾” NPT

3M M20X1.5


3A P & F IS

13A P & F

3C Ifm

13C Ifm IS

23C Ifm

NJ2 V3N 8 VDC, 3mA, NC


IS 5026 24V, 200 mA, NO/NC

NS 5002 8 VDC, NO/NC

IN 0073 24VDC, 150mA, NO/NC

U CU , ULL L

C CE

A ATEX

CM CMRI

CC CMRI CCDE

B Aluminum-Black

Y Yellow

L Blue


Aluminum-

Aluminum-

Body/Cover



2 WIRE PROXIMITY-NO

2 WIRE PROXIMITY-NC

SOLENOID VALVE

GND

PN

SOLENOID CONTROLSIGNAL

GND

PN


GND

PN

GND

PN

NOI

BU -

BN +

COMNONC

COMNONC

BU -

BN +I

NO



NC BU -

HAZARDOUS AREA

IBN +

NC BU -I

BN +

COMNONC

COMNONC

BU -

BN +

BU -

BN +

SAFE AREA

POWERSUPPLY

NCCOMNO

NCCOMNO

NO

T IN

RO

TE

X S

CO

PE

Ex ia BARRIER



15

4

29

4

59 96

155

½” NPT¾” NPTM20 X 1.5

Ø12

SQ.57 5/16” UNC4 NOS.

SQ

.35.

4

M6-4NOS.

14

8


DNLF3-Explosion Proof Flat Prox Switch

2120 NON FALLING SCREW 8 STAINLESS STEEL19 ‘O’RING 1 NBR18 ‘O’RING 2 NBR17 BRACKET 1 M.S.16 SPRING 1 STAINLESS STEEL15 ‘E’ TYPE CIRCLIP 1 SPRING STEEL14 SCREW FOR EARTHING 2 STAINLESS STEEL13 SCREW FOR CONN. STRIP 2 STAINLESS STEEL12 SCREW FOR BRACKET 2 STAINLESS STEEL11 GASKET 1 NBR10 INDICATOR COVER 1 POLYCARBONATE9 INDICATOR 1 ABS PLASTIC8 TERMINAL BLOCK-6WAY 1 -7 PROXIMITY SENSOR 2 P&F, iFM6 SPRING DOWEL 2 SPRING STEEL5 SHAFT 1 STAINLESS STEEL4 CAM-LOCK 2 DELRIN3 CAM 2 POLYCARBONATE2 COVER 1 ALUMINUM ALLOY LM-61 HOUSING 1 ALUMINUM ALLOY LM-6





22

3

17

12

5

9

10

21 26

11

7

4

16

1

813

1815

19

20

23

14



DNLF5-Explosion Proof DPDT Mechanical Switch

• Explosion proof to l, IIA, IIB, and IIC • Enclosure certified to UL 1203 & UL508, File No. 246615• Switch Box conforms to Ex D IIC, T6 highest level of safety• ATEX certified by CESI, ltaly, Cert No. CESI 05 ATEX017• Aluminum die cast enclosure, powder coated for superior

corrosion resistance• Weather proof enclosure to lP67 • Polycarbonate Dome, Shatterproof • Red and Yellow Indicator• Color coded cams easy to identify, easy to set• Special circuit board eliminates internal wiring• Circuit board laminated for complete corrosion protection• Solenoid termination inside the switch box not available• Serrated cams locked together ensures adjusted settings

secured against any vibration • Two conduit entries provided as standard• Conduit entry options ½” NPT, ¾” NPT, M20X1.5• Temperature 4°F to 146°F• Bracket available as option

FEATURES

••

DNLF-5A2-6R-B-BKS1-A

Explosion proof to I, II A and II B and Weather proof box provided with Honeywell 10 Amp switches 2 nos, each with two NO and two NC, 3/4" NPT cable gland entry. With Stainless Steel bracket suitable for 80X30 tapping and for 20mm pinion height. With ATEX Certification.

ORDERING EXAMPLE

ORDERING OPTIONS






1

2



Certificates

DNLF 4R ½” NPT

6R ¾” NPT

3M M20X1.5

U CU , ULL L

C CE

A ATEX

CM CMRI

CC CMRI CCDE

B Aluminum-Black

Y Yellow

L Blue


Aluminum-

Aluminum-

Body/Cover



2120 SCREW FOR EARTHING 2 STAINLESS STEEL19 CIRCUIT BOARD 1 -18 ‘O’RING 2 NBR17 ‘O’RING 1 NBR16 SPRING 1 STAINLESS STEEL15 ‘E’ TYPE CIRCLIP 1 SPRING STEEL14 SCREW FOR COVER 8 STAINLESS STEEL13 SCREW FOR CONN. STRIP 2 STAINLESS STEEL12 SCREW FOR BRACKET 2 STAINLESS STEEL11 GASKET 1 NBR10 INDICATOR COVER 1 POLYCARBONATE9 INDICATOR 1 ABS PLASTIC8 CONNECTOR STRIP 6 WAY 1 POLYMIDE7 MICROSWITCH (DPDT) 2 HONEYWELL/CHERRY6 SPRING DOWEL 2 SPRING STEEL5 SHAFT 1 STAINLESS STEEL4 CAM-LOCK 2 POM3 CAM 2 POLYMIDE2 COVER 1 ALUMINUM ALLOY LM-61 HOUSING 1 ALUMINUM ALLOY LM-6



NO

NC

COM

NO

NC

NO

NC

NO

NC

NO

NC

NO

NC

COM

NO

NC

COM

NO

NC

COM



123

17

21

14

7

19

18

15

13 81

20

11

246

10

9

5

16


DNLF5-Explosion Proof DPDT Mechanical Switch


15

4

29

4

59 96Ø12


155

SQ.57 5/16” UNC4 NOS.

SQ

.35.

4

14

8

M6-4 NOS.




DNLF6-Explosion Proof Hermetically Sealed Prox Switch

ROTEX Cobra Switch

• Explosion proof to l, IIA, IIB, and IIC • Enclosure certified to UL 1203 & UL508, File No. 246615 • Switch Box conforms to Ex D IIC, T6 highest level of safety• ATEX certified by CESI, ltaly, Cert No. CESI 05 ATEX017 • Aluminum die cast enclosure, powder coated for superior

corrosion resistance• Weather proof enclosure to lP67 • Polycarbonate Dome, Shatterproof • Red and Yellow Indicator• Color coded cams easy to identify, easy to set• Special circuit board eliminates internal wiring• Circuit board laminated for complete corrosion protection• Solenoid termination inside the switch box is standard• Serrated cams locked together ensures adjusted settings

secured against any vibration • Two conduit entries provided as standard• Conduit entry options ½” NPT, ¾” NPT, M20X1.5• Temperature 4°F to 146°F• Bracket available as option

FEATURES

ORDERING OPTIONS

••

DNLF-6A2-6R-B-BKS1-A

Explosion proof box with (2) hermetically sealed switches, ¾” conduit entries, black enclosure, with stainless steel bracket suitable for 80X30 tapping and for 20mm pinion height. With ATEX certificate

ORDERING EXAMPLE


6A

16A

Hermetic Switch Inc. COBRA 2Amps, 220V AC/DC,50Hz/60Hz, NO/NC

Hermetic Switch Inc. COBRA GOLD 0-48 VDC, up to 100mA0-220 VAC, 20 mA

1

2


DNLF 4R ½” NPT

6R ¾” NPT

3M M20X1.5

Bracket


Certificates

U CU , ULL L

C CE

A ATEX

B Aluminum-Black

Y Yellow

L Blue


Aluminum-

Aluminum-

Body/Cover



23 CIRCUIT BOARD 1 -22 ‘O’RING 1 NBR21 PHILIPS HEAD SCREW 4 STAINLESS STEEL20 SCREW FOR EARTHING 2 STAINLESS STEEL19 MOUNTING PLATE 1 M.S.18 ‘O’RING 2 NBR17 CAM INSERT 2 POLYAMIDE16 SPRING 1 STAINLESS STEEL15 ‘E’ TYPE CIRCLIP 1 SPRING STEEL14 NON FALLING SCREW 8 STAINLESS STEEL13 SCREW FOR CONN. STRIP 2 STAINLESS STEEL12 SCREW FOR REEDSWITCH 2 STAINLESS STEEL11 GASKET 1 NBR10 INDICATOR COVER 1 POLYCARBONATE9 INDICATOR 1 ABS PLASTIC8 CONNECTOR STRIP-6WAY 1 POLYMIDE7 REED SWITCH ASSEMBLY 2 -6 SPRING DOWEL 2 SPRING STEEL5 SHAFT 1 STAINLESS STEEL4 CAM-LOCK 2 POM3 CAM 2 POLYCAMIDE2 COVER 1 ALUMINUM ALLOY LM-61 HOUSING 1 ALUMINUM ALLOY LM-6


SOLENOID VALVE

GND

PN

GND

PN


COMNONCCOMNONC

COMNO

NC

COMNO

NC



12

3

22

21

14

7

17

19

23

1815

13 8

1

20

11

246

10

9

5

16

15

4

29

4

59

½” NPT or¾” NPT orM20 X1.5

Ø1296

155

SQ.57 5/16” UNC4 NOS.

SQ

.35.

4

M6-4 NOS.

14

8


DNLF6-Explosion Proof Hermetically Sealed Prox Switch ROTEX Cobra Switch





DNLF-Limit Switch With Integral Solenoid Valve

ROTEX STRIKER Switch

NEMA 4, 4X, 7 & 9

•• Enclosure certified to UL 1203 & Ul508, File No. 246615• Switch Box conforms to Ex D IIC, T6 highest level of safety• ATEX certified by CESI, Italy, Cert No. CESI 05 ATEX017• Aluminum die cast enclosure, powder coated• Weatherproof enclosure to IP67• Temperature -4 °F to 176 °F• Polycarbonate Dome, Shatterproof, Red/Yellow• Color coded cams easy to identify, easy to set• Serrated cams locked together ensures adjusted settings

are secure against any vibration• Two conduit entries provided as standard• Conduit entry options ½” NPT, ¾” NPT (Std), M20X1.5• Choice of proximity type or mechanical switches• Solenoid coils are mounted INSIDE the box• 4 way solenoid can work for DA or SR actuator• ¼” NPT solenoid body in SS or aluminum, Cv=1.1• Available single coil or dual coil• Special configurations may be available on request

Explosion proof to I, IIA, IIB, and IIC

FEATURES

B Aluminum-Black

Y Yellow

L Blue


Aluminum-

Aluminum-

Body/Cover

4R ½” NPT

6R ¾” NPT

3M M20X1.5

Series

DNLF 1

2

Switch Qty Switches Conduit Entry Coils

1 120V AC

2 24V DC

Voltage Sol. Body

S Single

D Dual

A Aluminum

S 316 SS



U UL

C CE

A ATEX

CODE

1A 0.1Amp 48V DC, NO/ NC

11A Honeywell V7-1C17E9-201 15Amp 125 OR 250V AC,0.5Amp 125V DC,0.25Amp 250V DC, NO/ NC

3A P&F NJ2-V3-N 8V DC, 3mA, NC Type EEx ia13A (Intrinsically Safe) NBB3-V3-Z4 10-60V DC, 100mA, NO

6A Hermetic Switch Inc. R1 2Amps, 220V AC/ DC16A R2 0.2Amps, 24V DC

Honeywell V15S05-CZ100A05-0 15Amp 125 OR 250V AC,

MODEL RATINGMAKE

ORDERING OPTIONS

•• Explosion proof aluminum box with (2) Hermetically sealed switches, (2) ¾” conduit entries, blue enclosure with single coil

120 VAC solenoid ¼” aluminum body, UL Certified Consult Rotex Controls with your specific application requirements

DNLF-6A26RL-S1A-U

ORDERING EXAMPLE



DNLF-Limit Switch For Dribble Control

ROTEX STRIKER DRIBBLE Switch

NEMA 4, 4X, 7 & 9

B Aluminum-Black

Y Yellow

L Blue


Aluminum-

Aluminum-

Body/Cover

4R ½” NPT

6R ¾” NPT

3M M20X1.5

Series

DNLF 3

4

Switch Qty Switches Conduit Entry

CODE

1A 0.1Amp 48V DC, NO/ NC

11A Honeywell V7-1C17E9-201 15Amp 125 OR 250V AC,0.5Amp 125V DC,0.25Amp 250V DC, NO/ NC

3A P&F NJ2-V3-N 8V DC, 3mA, NC Type EEx ia13A (Intrinsically Safe) NBB3-V3-Z4 10-60V DC, 100mA, NO

6A Hermetic Switch Inc. R1 2Amps, 220V AC/ DC16A R2 0.2Amps, 24V DC

Honeywell V15S05-CZ100A05-0 15Amp 125 OR 250V AC,

MODEL RATINGMAKE

Dribble

1 120V AC

2 24V DC

Voltage Sol. Body



A Aluminum

S 316 SS

U UL

C CE

A ATEX

DR

•• Enclosure certified to UL 1203 & Ul508, File No. 246615• Switch Box conforms to Ex D IIC, T6 highest level of safety• ATEX certified by CESI, Italy, Cert No. CESI 05 ATEX017• Aluminum die cast enclosure, powder coated• Weatherproof enclosure to IP67• Temperature -4 °F to 176 °F• Polycarbonate Dome, Shatterproof, Red/Yellow• Color coded cams easy to identify, easy to set• Serrated cams locked together ensures adjusted settings

are secure against any vibration• Two conduit entries provided as standard• Conduit entry options ½” NPT, ¾” NPT (Std), M20X1.5• Choice of proximity type or mechanical switches• Solenoid coils are mounted INSIDE the box• Dribble configuration allows midway valve position for

applications such as tank filling• ¼” NPT solenoid body in SS or aluminum, Cv=1.1• Special configurations may be available on rquest

Explosion proof to I, IIA, IIB, and IIC

FEATURES

ORDERING OPTIONS

•• Explosion proof aluminum box with (3) mechanical switches, (2) ¾” conduit entries, blue enclosure with 120 VAC dribble

control ¼” aluminum body, UL Certified Consult Rotex Controls with your specific application requirements

DNLF-1A36RL-DR1A-U

ORDERING EXAMPLE



••

DNLF-1A2-P1-4R-B-BSK1-C

Explosion proof box having a potentiometer output of 1 K ohm resistance when rotated 90 degree. The switch has a 10 amp Honeywell micro switch, with ½” cable entries, Black color, Stainless Steel Bracket 80x30 tapping, pinion height 20 mm,CE approved.

DNLF1-P-NEMA 4 SPDT Mechanical Switch with Position Transmitter

•• Limit Switch with position feedback rated NEMA 4, 4X• 0.2% FS - Repeatability 0.2% FS• Hysterisis 0.3% FS • Field adjustable Feedback, 1 K or 10 K Ohms • Two conduit entries provided as standard• Conduit entry options : ½” NPT, ¾” NPT, M20X1.5• Complies to Namur mounting standard• 2 wire system • Spring loaded resistive feedback • Microswitch feedback for on and off provided • Visual percentage indicator provided• Red and Yellow Indicator • Temperature range 4°F to 146°F • Bracket available as option

Position transmitter may be added to DNLF1 switches only.

FEATURES

ORDERING EXAMPLE

ORDERING OPTIONS

4R ½” NPT

6R ¾” NPT

3M M20X1.5

DNLF

Conduit Entry

1

2

Qty SwitchesSwitchSeries

P1 1 K Ohm

P10 10 K Ohm

Feedback



U CU , ULL L

C CE


1A

11A Honeywell V7-1C17E9-201 15Amp

1B Cherry

11B Cherry

Honeywell V5C010EN3D 10Amp120 or 250 VAC, 220 VDC50Hz/60Hz, NO/NC

120 or 250 VAC, 220 VDC50Hz/60Hz, NO/NC

D43 CQ1 RA 5Amp125 or 250 VAC, 220 VDCNO/NC

D45 CQ1 RA 15Amp125 or 250 VAC, 220 VDCNO/NC

B Aluminum-Black

Y Yellow

L Blue


Aluminum-

Aluminum-

Body/Cover



27 HEX SOC. SET SCREW 2 STAINLESS STEEL26 POTENTIOMETER 1 -25 PHILIPS HEAD SCREW 4 STAINLESS STEEL24 CAM-2 1 ALUMINUM23 CAM-1 1 ALUMINUM22 BRACKET 1 M.S.21 SLOTTED CHEESE HEAD SCREW 2 STAINLESS STEEL20 NON FALLING SCREW 8 STAINLESS STEEL19 ‘O’RING 1 NBR18 ‘O’RING 2 NBR17 PAD 1 POLYAMIDE16 SPRING 1 STAINLESS STEEL15 ‘E’ TYPE CIRCLIP 1 SPRING STEEL14 SCREW FOR EARTHING 2 STAINLESS STEEL13 SCREW FOR CONN. STRIP 2 STAINLESS STEEL12 SCREW FOR MICROSWITCH 2 STAINLESS STEEL11 GASKET 1 NBR10 INDICATOR COVER 1 POLYCARBONATE9 INDICATOR 1 ABS PLASTIC8 TERMINAL BLOCK-6WAY 1 -7 MICRO SWITCH (SPDT) 2 HONEYWELL/CHERRY6 SPRING DOWEL 2 SPRING STEEL5 SHAFT 1 STAINLESS STEEL4 CAM-LOCK 2 DELRIN3 CAM 2 POLYCARBONATE2 COVER 1 ALUMINUM ALLOY LM-61 HOUSING 1 ALUMINUM ALLOY LM-6


DNLF1-P-NEMA 4 SPDT Mechanical Switch with Position Transmitter


DNLF 1A2+P1 WITH MICROSWITCH

15

4

29

4

Ø129659

155

SQ.57

SQ

.35.

4

5/16” UNC4 NOS.

14

8

M6-4 NOS.


3

22

21

14

7

16

17

19

1815

13 8

1

20

11

246

10

9

5

12

SOLENOID VALVE

GND

PN

GND

PN


COMNONCCOMNONC

COMNO

NC

COMNO

NC







DXLW-AF Weather Proof Limit Switch AS-I Protocol

DXLW-AFD-Weather Proof Limit Switch-AS-I Protocol, Dribble control

•overcome lengthy wiring. It is easy to operate, maintain and control.

• The limit switch box is configured to exchange data through field bus using AS-I protocol.

• Field bus connectivity is achieved by using one or two cables depending on wiring system.

• Solenoid termination inside enclosure is standard.

Weather proof type “W” limit switch box has been designed to

COMMUNICATION CHARACTERISTICS

Protocol : AS-I Interface using V2.1 profile 4140 simple addressing

Transmission : AS-I cable flat type 2 wire, need 2 pair, or 5 wire cable

Bus Structure : Line or tree using repeaters

Max # of Slaves : 31

Input/output per Box : 2 Outputs / 2 Inputs

Bus Cable Length : 100m, 300m with repeaters

Field Communication : Hand held infra-red controller

ELECTRICAL CHARACTERISTICS

Supply Voltage : 24 V DC +/- 10% with max 15% ripple

Bus Consumption : <250 mA

Solenoid Consumption : Up to 8 Watts

Protection : IP 55

Supply Connection (24V) : Flat with vampire type connector

Ground Connection : Ground screw inside enclosure

Electromagnetic Compatibility : CE, Directive EMC 89/336/EEC

B Aluminum-Black

Y Yellow

L Blue


Aluminum-

Aluminum-

Body/Cover


1A Honeywell

3A P & F

13A P & F

V5SC010EN3D 24 VDC, 5Amp



4R ½” NPT

3M M20X1.5

1

2

Series Switch Qty. Switches Conduit Entry CertificatesProtocol

AF AS-I

AFD AS-IDribble

C CE

Bracket


DXLW

ORDERING OPTIONS

••

DXLW-13A2-4R-B-AF

Weather proof box provided with (2) PEPPERL+FUCHS flat switches, DC output, each with one NO, ½” NPT conduit entries, black enclosure. With AS-I Protocol.

ORDERING EXAMPLE



DNLF-AF Explosion Proof Limit Switch AS-I Protocol

DNLF-AFD-Explosion Proof Limit Switch-AS-I Protocol, Dribble control


• The limit switch box is configured to exchange data through field bus using AS-I protocol.

• Field bus connectivity is achieved by using one or two cables depending on wiring system.


Explosion proof type 'F' limit switch box has been designed to





Protection : IP 55

Supply Connection (24V) : Flat with vampire type connector

Ground Connection : Ground screw on enclosure exterior



Protocol : AS-I Interface using V2.1 profile 4140 simple addressing

Transmission : AS-I cable flat type 2 wire, need 2 pair, or 5 wire cable




Bus Cable Length : 100m, 300m with repeaters

Field Communication : Hand held infra-red controller

B Aluminum-Black

Y Yellow

L Blue


Aluminum-

Aluminum-

Body/Cover


1A Honeywell

3A P & F

13A P & F




4R ½” NPT

6R ¾” NPT

3M M20X1.5

1

2

Series Switch Qty. Switches Conduit Entry CertificatesProtocol

AF AS-I

AFD AS-IDribble

CM CMRI

CC CMRI CCOE

C CE

Bracket


DNLF

ORDERING OPTIONS

••

DNLF-13A2-4R-Y-AF

Explosion proof box provided with (2) PEPPERL+FUCHS flat switches, DC output, each with one NO, ½” NPT conduit entries, yellow enclosure. With AS-I Protocol.

ORDERING EXAMPLE



DXLW-DF/ DXLW-CF Weather Proof Limit Switch DEVICENET or CAN OPEN Protocol


• The limit switch box is configured to exchange data through field bus using either DEVICENET or CAN OPEN protocol.

• Field bus connectivity is achieved by using 2X2 cable and grounding, 5 core cable.


Weather proof type ‘W’ limit switch box has been designed to


Protocol : DEVICENET or CAN OPEN

Transmission : Shielded and twisted pair 2X2-wire cable




Bus Cable Length : 500m at 125 KBD and 100m at 500 KBd

Field Communication : Dip switch on the circuit board




Protection : IP 55

Supply Connection (24V) : M8 socket 4 pin male

Bus Connection : 5 pin M12-A male

Ground Connection : Ground screw inside enclosure



B Aluminum-Black

Y Yellow

L Blue


Aluminum-

Aluminum-

Body/Cover


1A Honeywell

3A P & F

13A P & F




4R ½” NPT

3M M20X1.5

1

2

Series Switch Qty. Switches Conduit Entry Certificates

C CE

BracketProtocol

DF DEVICENET

CF CAN OPEN


DXLW

ORDERING OPTIONS

••

DXLW-13A2-4R-Y-DF

Weather proof box provided with (2) PEPPERL+FUCHS flat switches, DC output, each with one NO, ½” NPT conduit entries, yellow enclosure. With DEVICENET Protocol.

ORDERING EXAMPLE



DNLF-DF/ DNLF-CF Explosion Proof Limit Switch DEVICENET or CAN OPEN Protocol


• The limit switch box is configured to exchange data through field bus using either DEVICENET or CAN OPEN protocol.

• Field bus connectivity is achieved by using 2X2 cable and grounding, 5 core cable.


Explosion proof type ‘F’ limit switch box has been designed to

Protocol : DEVICENET or CAN OPEN

Transmission : Shielded and twisted pair 2X2-wire cable



Input/output per Box : 2 Outputs/ 2 Inputs

Bus Cable Length : 500m at 125 KBD and 100m at 500 KBd

Field Communication : Dip switch on the circuit board






Protection : IP 55


Bus Connection : 5 pin M12-A male



B Aluminum-Black

Y Yellow

L Blue


Aluminum-

Aluminum-

Body/Cover

4R ½” NPT

6R ¾” NPT

3M M20X1.5


1A Honeywell

3A P & F

13A P & F




1

2


CM CMRI

CC CMRI CCOE

C CE

CertificatesBracketProtocol

DF DEVICENET

CF CAN OPEN


DNLF

ORDERING OPTIONS

••

DNLF-13A2-4R-Y-DF

Explosion proof box provided with (2) PEPPERL+FUCHS flat switches, DC output, each with one NO, ½” NPT conduit entries, yellow enclosure. With DEVICENET Protocol

ORDERING EXAMPLE



DXLW-PF Weather Proof Limit Switch PROFIBUS-DP Protocol


• The limit switch box is configured to exchange data through field bus using Profibus-DP protocol.

• Field bus connectivity is achieved by using RS 485 interface 5 core cable.


Weather proof type 'W' limit switch box has been designed to


Protocol : PROFIBUS-DP, DIN 19245-Part 3-EN50170

Transmission : Shielded and twisted pair



Input/ output per Box : 2 Outputs/ 2 Inputs

Bus Cable Length : 1,200m at 9.6 KPS and 100m at 12 Mbps

Field Communication : By rotary switch





Protection : IP 55


Bus Connection : IN: 5 pin M12-B male OUT : 5 pin M12-B female



B Aluminum-Black

Y Yellow

L Blue


Aluminum-

Aluminum-

Body/Cover

4R ½” NPT

6R ¾” NPT

3M M20X1.5


1A Honeywell

3A P & F

13A P & F




1

2


PF Profibus-DP CM CMRI

CC CMRI CCOE

C CE



DNLF

ORDERING OPTIONS

••

DNLF-13A2-4R-Y-PF

Explosion proof box provided with (2) PEPPERL+FUCHS flat switches, DC output, each with one NO, ½” NPT conduit entries, yellow enclosure. With PROFIBUS-DP Protocol

ORDERING EXAMPLE



DNLF-PF Explosion Proof Limit Switch PROFIBUS-DP Protocol


• The limit switch box is configured to exchange data through field bus using Profibus-DP protocol.

• Field bus connectivity is achieved by using RS 485 interface 5 core cable.


Explosion proof type 'F' limit switch box has been designed to


Protocol : PROFIBUS-DP, DIN 19245-Part 3-EN50170

Transmission : Shielded and twisted pair



Input/ output per Box : 2 Outputs/ 2 Inputs

Bus Cable Length : 1,200m at 9.6 KPS and 100m at 12 Mbps

Field Communication : By rotary switch





Protection : IP 55


Bus Connection : IN : 5 pin M12-B male OUT : 5 pin M12-B female



••

DNLF-13A2-4R-Y-PF

Explosion proof box provided with (2) PEPPERL+FUCHS flat switches, DC output, each with one NO, ½” NPT conduit entries, yellow enclosure. With PROFIBUS-DP Protocol.

ORDERING EXAMPLE

4R ½” NPT

6R ¾” NPT

3M M20X1.5


1A Honeywell

3A P & F

13A P & F




1

2


PF Profibus-DP CM CMRI

CC CMRI CCOE

C CE



DNLF

ORDERING OPTIONS

B Aluminum-Black

Y Yellow

L Blue


Aluminum-

Aluminum-

Body/Cover

INFINITY ACTUATORS

21 Sullivan Parkway,Fort Edward, NY 12828

Tel : (888) 813 - 9772Fax : (866) 478 - 9620

www.rotexcontrols.com

LI S

W -

01

- 1

3 -

M1

DE

SIG

N : M

ed

ia In

c. P

h. +

91

-26

5-2

42

28

35

aquaseal - npcil e-tenders | public tenders | offline tenders€¦ · en 1092-2 pn 10, bs 4504 pn...

Documents