applitrac manual implements

Description of Products Page No.

Sugarcane Farm Solutions

Cane Thumper 2

Sickle Sword 3

Detrasher 4

Shredder 5

Rice Farm Solutions

Rice Transplanter 6 - 7

Harvesting Crop Solutions

Combine Harvester 8 - 10

Post Hole Digger 11

Front End Loader 12

Laser Leveler 13

Basic Farm Implements

Hydraulic Reversible Plough 14

Disc Plough 15

Mounted Offset Disc Harrow 16

Rotavator 17

Cultivator (Tiller) 18 - 19

Forth Coming Farm Solutions 20

The data contained in this hand book are given for information only and are not binding.

Specification/Technical data/Design are subject to change without prior notice for product improvements.

Features

Cane Thumper

Cane Thumper, a self driven walk behind machine with patented and best in class German double blade cutting

technology. It is manufactured in Germany to high quality and safety standards. An important advantage of this machine is that it is able to cut lodged cane. This is designed for the ef f i c ient , economic and consistent cane cutting.

Robust design : For professional use (Patent protected)

Excellent cutting : High harvesting speedperformance

Improved cutting : Clean cut base and no stool damage

Long service life : Patented ESM Carbodux knife sections resistant against foreign obstacles such as stones.

Minimal Maintenance : Low Blade speed, minimal blade wear, easy replacement of knife assemblies.

Comfortable handling : Vibration free action

Environment friendly : Low power consumption

Safe handling : Zero second safety stop for drive mechanism, foot protection guard.

0Easy Handling : Cuts even on slopes (upto 55% / 25

0Continuously; 80% / 35 intermediate) cuts lodged cane, cuts green cane.

Sickle Sword

Modern, efficient and e a s y w a y o f h a r v e s t i n g sugarcane. It takes

very little time as compared to manual cutting. The advanced ESM Carbodux knife double blade unit enables to cut as close to the ground as possible. And it doesn't wear off even when faced with stones and other foreign particles.

Cutting length : 110 mm to 170 mm

Three point linkage : Suitable for Cat I & II

Overall weight : 200 kg

Cutting Height : Adjustable with the help of inner and outer shoes provided on the cutting unit.

Safety mechanism : Spring loaded ratchet on the cutting arm. Hydraulically operated weight transfer mechanism to save stool of the already cut cane. Hydraulic lifting of cutting blades on turns.

Operating Speed : 1.6 to 3.5 km

Output : 20 - 30 tons / hour depending upon crop density.

Adjustable skid heights for cutting on ridges.

Patented double action cutter bar.

S u p p o r t e d w i t h f l o a t i n g mechanism to follow the field / furrow contours and not spoil the already cut cane stool.

Capable of cutting any crops, including grass mowing.

Technical Data Technical Data

Features

Width of cut : According to the planted ROWS

Section Pattern : 70 - 84 mm

Cutting Speed : Depending upon crop volume

Power Consumption : max. 3kW (per 1m of cutting width)

Knife driving system : Heavy duty closed oilbath drive, maintenance free

Carrier unit : KOPPL 4M 508HLS

Engine : Hatz diesel 1 30, 4 stroke diesel engine

Power : 4.8kW (6.5D/N-HP) at 2800 RPM

Transmission : Mechanical gear box, with 4 forward and 3 reverse gears, with lockable differential, wheel reduction gear drives.

Brakes : Safety and parking brakes

Ergonomical Handlebar : Mec. Vertical / Lateral adjustable, operator safety device, Fast F/R change

Special Features : Donaldson air filter, headlight, hourmeter

Additional options : Twin tyres, metal grid wheels.

Features

Cane Thumper

Cane Thumper, a self driven walk behind machine with patented and best in class German double blade cutting

technology. It is manufactured in Germany to high quality and safety standards. An important advantage of this machine is that it is able to cut lodged cane. This is designed for the ef f i c ient , economic and consistent cane cutting.

Robust design : For professional use (Patent protected)

Excellent cutting : High harvesting speedperformance

Improved cutting : Clean cut base and no stool damage

Long service life : Patented ESM Carbodux knife sections resistant against foreign obstacles such as stones.

Minimal Maintenance : Low Blade speed, minimal blade wear, easy replacement of knife assemblies.

Comfortable handling : Vibration free action

Environment friendly : Low power consumption

Safe handling : Zero second safety stop for drive mechanism, foot protection guard.

0Easy Handling : Cuts even on slopes (upto 55% / 25

0Continuously; 80% / 35 intermediate) cuts lodged cane, cuts green cane.

Sickle Sword

Modern, efficient and e a s y w a y o f h a r v e s t i n g sugarcane. It takes

very little time as compared to manual cutting. The advanced ESM Carbodux knife double blade unit enables to cut as close to the ground as possible. And it doesn't wear off even when faced with stones and other foreign particles.

Cutting length : 110 mm to 170 mm

Three point linkage : Suitable for Cat I & II

Overall weight : 200 kg

Cutting Height : Adjustable with the help of inner and outer shoes provided on the cutting unit.

Safety mechanism : Spring loaded ratchet on the cutting arm. Hydraulically operated weight transfer mechanism to save stool of the already cut cane. Hydraulic lifting of cutting blades on turns.

Operating Speed : 1.6 to 3.5 km

Output : 20 - 30 tons / hour depending upon crop density.

Adjustable skid heights for cutting on ridges.

Patented double action cutter bar.

S u p p o r t e d w i t h f l o a t i n g mechanism to follow the field / furrow contours and not spoil the already cut cane stool.

Capable of cutting any crops, including grass mowing.

Technical Data Technical Data

Features

Width of cut : According to the planted ROWS

Section Pattern : 70 - 84 mm

Cutting Speed : Depending upon crop volume

Power Consumption : max. 3kW (per 1m of cutting width)

Knife driving system : Heavy duty closed oilbath drive, maintenance free

Carrier unit : KOPPL 4M 508HLS

Engine : Hatz diesel 1 30, 4 stroke diesel engine

Power : 4.8kW (6.5D/N-HP) at 2800 RPM

Transmission : Mechanical gear box, with 4 forward and 3 reverse gears, with lockable differential, wheel reduction gear drives.

Brakes : Safety and parking brakes

Ergonomical Handlebar : Mec. Vertical / Lateral adjustable, operator safety device, Fast F/R change

Special Features : Donaldson air filter, headlight, hourmeter

Additional options : Twin tyres, metal grid wheels.

Detrasher

The solution being offered by App l iTrac , Mah indra & Mahindra l imi ted is a detrasher.

Shredder

The solution being offered by App l iTrac , Mah indra & Mahindra limited is a trash shredder. This trash shredder

can be used on the dry trash left behind in the field after the cane has been harvested. The trash that is left behind hinders with the ratoon growth as it depleted the soil by reducing soil aeration.

Modern technology used to build this tractor drawn implement

Easy availability of spares and service

0.5 – 0.6 hectares per hour

Fuel consumption is 9 – 10 liters per acre

The trash is shredded and spread uniformly into soil which enhances the soil organic matter contained fastening the decomposition

Ensures soil regain optimum moisture and permits proper aeration of soil to enhance crop productivity

Enriches soil fertility and increases crop productivity by 6-7 tons/acre

Technical Data

Features

Total Weight (Kg) : 1025

Total Width of Machine (mm) : 2135

Total Working Width (mm) : 1830

Total Length of Machine (mm) : 3600

Number of Blades : 162

RPM of working shaft : 1350

Tractor Range suitability (HP) : 45 to 70

Detrasher

The solution being offered by App l iTrac , Mah indra & Mahindra l imi ted is a detrasher.

Shredder

The solution being offered by App l iTrac , Mah indra & Mahindra limited is a trash shredder. This trash shredder

can be used on the dry trash left behind in the field after the cane has been harvested. The trash that is left behind hinders with the ratoon growth as it depleted the soil by reducing soil aeration.

Modern technology used to build this tractor drawn implement

Easy availability of spares and service

0.5 – 0.6 hectares per hour

Fuel consumption is 9 – 10 liters per acre

The trash is shredded and spread uniformly into soil which enhances the soil organic matter contained fastening the decomposition

Ensures soil regain optimum moisture and permits proper aeration of soil to enhance crop productivity

Enriches soil fertility and increases crop productivity by 6-7 tons/acre

Technical Data

Features

Total Weight (Kg) : 1025

Total Width of Machine (mm) : 2135

Total Working Width (mm) : 1830

Total Length of Machine (mm) : 3600

Number of Blades : 162

RPM of working shaft : 1350

Tractor Range suitability (HP) : 45 to 70

Rice Transplanter

N e w M a h i n d r a R i c e Transplanter: the perfect a n s w e r t o r i c e t r a n s p l a n t a t i o n . T h i s

advanced machine ensures accurate spacing, thus controlling the precise plant population in each row. What's more, it is a boon when it comes to proper de-weeding and spraying of the fields. It's easy to operate, saves significantly on the costs, and can cover almost 80-120 acres in a single season. Undoubtedly, another "must-have" agricultural equipment from Mahindra.

Model : PF 455S

Type : Walk behind 2-wheel 3 float type

Engine

Type : Air cooled 4-stroke petrol engine

Bore x Stroke : 62mm x 43 mm

Rated Horsepower : 2.3HP @ rated rpm

Rated rpm : 3600 rpm

Displacement : 130 cc

Starting mechanism : Recoil Starter

Transmission

No. of Speeds : 2F + 1R

Transplanting speed : 1.22 - 2.66 kmph

Travelling speed : 5.18 kmph

Planting Mechanism

Type of Seedling : Mat type

No. of Planting arms : 4

Row spacing : 30 cm (Standard)

Number of saplings per hill : 3~52No. of hills per m : 27 / 30 / 33

Hill spacing : 15.7 / 13.8 / 12.2 cm

Dimensions & Capacities

Length : 2450 mm

Width : 1480 mm

Height : 840 mm

Weight : 170 kg

Fuel tank capacity : 3.2 lit

Rice Transplanter

Self Adjusting Float mechanism Puddled soil put on top of polythene sheet in the fieldTechnical Data

Features Nursery Preparations

Spare seeding tray Use of frame to cut the mat as per tray dimension of rice transplanter

Rubber lug wheels Sprouted paddy will be ready for transplantation on 15th-18th day.

Rice Transplanter

N e w M a h i n d r a R i c e Transplanter: the perfect a n s w e r t o r i c e t r a n s p l a n t a t i o n . T h i s

advanced machine ensures accurate spacing, thus controlling the precise plant population in each row. What's more, it is a boon when it comes to proper de-weeding and spraying of the fields. It's easy to operate, saves significantly on the costs, and can cover almost 80-120 acres in a single season. Undoubtedly, another "must-have" agricultural equipment from Mahindra.

Model : PF 455S

Type : Walk behind 2-wheel 3 float type

Engine

Type : Air cooled 4-stroke petrol engine

Bore x Stroke : 62mm x 43 mm

Rated Horsepower : 2.3HP @ rated rpm

Rated rpm : 3600 rpm

Starting mechanism : Recoil Starter

Transmission

No. of Speeds : 2F + 1R

Transplanting speed : 1.22 - 2.66 kmph

Travelling speed : 5.18 kmph

Planting Mechanism

Type of Seedling : Mat type

No. of Planting arms : 4

Row spacing : 30 cm (Standard)

Number of saplings per hill : 3~52No. of hills per m : 27 / 30 / 33

Hill spacing : 15.7 / 13.8 / 12.2 cm

Dimensions & Capacities

Length : 2450 mm

Width : 1480 mm

Height : 840 mm

Weight : 170 kg

Fuel tank capacity : 3.2 lit

Rice Transplanter

Self Adjusting Float mechanism Puddled soil put on top of polythene sheet in the fieldTechnical Data

Features Nursery Preparations

Spare seeding tray Use of frame to cut the mat as per tray dimension of rice transplanter

Rubber lug wheels Sprouted paddy will be ready for transplantation on 15th-18th day.

Combine Harvester (Wheel) Combine Harvester (Crawler)

Highest grain recovery in the shortest time. Multi crop kit suitable for Wheat, Paddy, Soyabean, Sunflower, Gram.

Safflower, Mustard etc. crops.

Working successfully in different climatic and field conditions across the country from Punjab to Kerala & Gujarat to West Bengal.

Technical Data

Features

Technical Data

Features

Type : Crawler Type

Engine

Type : 4 Cylinder, 4 Stroke, Water Cooled Diesel Engine

Power : 75 BHP at 3000 r.p.m.

Cutting Mechanism

Cutter Bar

Working width : 2.10 m (7 feet)

Type : Pick up

Speed adjustment : 2 speeds by changing sprockets

Height adjustment : Hydraulic

Threshing Mechanism

Threshing & separating : 480 mmdrum dia.

Threshing section width : 560 mm

Separating section width : 1225 mm

Concave

Width : 575 mm

Clearance : Adjustable Mechanically

Cleaning Mechanism

Type : Forced air cleaning fan

Sieve cleaning area : 1.24 sq.m.

Ground Drive

Fully Hydraulic : Controlled independently by two levers on operators platform

Speed range : 0-9 km/hr

Track Assembly

No. of rubber : 61 (each side)grousers

Width of belt : 450 mm

Length of belt : 1820 mmon ground

Main Dimensions

Overall width : 2535 mm

Overall length : 5370 mm

Overall height : 2805 mm

Track gauge : 1370 mm

Outer of track : 1820 mm

Ground clearance : 262 mm

Capacities

Grain tank : 1200 liter

Fuel tank : 110 liter

Weight

Grain tank empty : 4800 kg

Grain tank full : 5700 kg

Type : Wheel Type

Engine

Make : Ashok Leyland Model ALU-400, C2/C3

Air Cleaner : Twin Oil Bath type

Cutting Mechanism

Cutter Bar

Min. cutting Height : 60 mm

Type : Pick up

Speed Adjustment : Mechanical

Threshing & Cleaning Mechanism

Threshing Drum

Width : 1274 mm

Diameter : 600 mm

Speed : 550-1125 r.p.m

Adjustment : Mechanical

Cleaning Sieve

Upper sieve area : 2.28 sq. meter

Lower sieve area : 1.55 sq. meter

Concave

Starw Walker

No. : 5

No. of steps : 5

Area : 5.2 sq. meter

Adjustment Mechanical

Front : (18.4/15-30) 14 PR

Rear : (7.50-16) 12 PR

Road Speed

Forward

1st gear : 1.5 to 3.5 km/hr

2nd gear : 2.3 to 8.5 km/hr

3rd gear : 8.5 to 20 km/hr

Reverse : 3.5 Km/hr.

Track & Base

Wheel track : 2407 mm

Wheel base : 3588 mm

Steering & Brakes

Steering : Hydrostatic

Brakes : Disc type mechanical

Capacities

Grain tank : 2.0 cubic meter

Low fuel consumption and maintenance free.

Light steering, small turning radius and adjustable cutter bar height.

Bigger dia of the ‘Rotor’ for more output.

Low speed/high torque Hydraulic motor - Less wear tear - Longer life.

Sturdy & low ratio Reduction Gear Box - Longer life.

Bigger dia discharge auger for faster unloading.

Ledger plate & Knife guard cutting system for longer life of cutting blade.

Least grain loss and hence highest yield / acre.

“BRIDGESTONE” Track for reliability and longer life.

Heavy/thick sheet metal for durability of cutter bar pan, elevators, etc.

Bigger dia discharge auger for faster unloading - saves time & improves efficiency.

Combine Harvester (Wheel) Combine Harvester (Crawler)

Highest grain recovery in the shortest time. Multi crop kit suitable for Wheat, Paddy, Soyabean, Sunflower, Gram.

Safflower, Mustard etc. crops.

Working successfully in different climatic and field conditions across the country from Punjab to Kerala & Gujarat to West Bengal.

Technical Data

Features

Technical Data

Features

Type : Crawler Type

Engine

Type : 4 Cylinder, 4 Stroke, Water Cooled Diesel Engine

Cutting Mechanism

Cutter Bar

Type : Pick up

Speed adjustment : 2 speeds by changing sprockets

Threshing Mechanism

Threshing & separating : 480 mmdrum dia.

Threshing section width : 560 mm

Separating section width : 1225 mm

Concave

Width : 575 mm

Cleaning Mechanism

Type : Forced air cleaning fan

Sieve cleaning area : 1.24 sq.m.

Ground Drive

Fully Hydraulic : Controlled independently by two levers on operators platform

Speed range : 0-9 km/hr

Track Assembly

No. of rubber : 61 (each side)grousers

Width of belt : 450 mm

Length of belt : 1820 mmon ground

Main Dimensions

Overall width : 2535 mm

Overall length : 5370 mm

Overall height : 2805 mm

Track gauge : 1370 mm

Outer of track : 1820 mm

Ground clearance : 262 mm

Capacities

Grain tank : 1200 liter

Weight

Grain tank empty : 4800 kg

Grain tank full : 5700 kg

Type : Wheel Type

Engine

Make : Ashok Leyland Model ALU-400, C2/C3

Air Cleaner : Twin Oil Bath type

Cutting Mechanism

Cutter Bar

Min. cutting Height : 60 mm

Type : Pick up

Speed Adjustment : Mechanical

Threshing & Cleaning Mechanism

Threshing Drum

Width : 1274 mm

Diameter : 600 mm

Speed : 550-1125 r.p.m

Adjustment : Mechanical

Cleaning Sieve

Upper sieve area : 2.28 sq. meter

Lower sieve area : 1.55 sq. meter

Concave

Starw Walker

No. : 5

No. of steps : 5

Area : 5.2 sq. meter

Adjustment Mechanical

Front : (18.4/15-30) 14 PR

Rear : (7.50-16) 12 PR

Road Speed

Forward

1st gear : 1.5 to 3.5 km/hr

2nd gear : 2.3 to 8.5 km/hr

3rd gear : 8.5 to 20 km/hr

Reverse : 3.5 Km/hr.

Track & Base

Wheel track : 2407 mm

Wheel base : 3588 mm

Steering & Brakes

Steering : Hydrostatic

Brakes : Disc type mechanical

Capacities

Grain tank : 2.0 cubic meter

Low fuel consumption and maintenance free.

Bigger dia discharge auger for faster unloading.

“BRIDGESTONE” Track for reliability and longer life.

Heavy/thick sheet metal for durability of cutter bar pan, elevators, etc.

Bigger dia discharge auger for faster unloading - saves time & improves efficiency.

Combine Harvester (Tractor Mounted)

Technical Data

Features

Type : Tractor Mounted Type

Engine

Model : NE 457

No. of Cylinder : 4

Rated RPM : 2100

Max. Torque : 21.4 kg-m

Engine HP : 56

PTO HP : 52

SFC : 176 gm/BHP Hr.

Air Cleaner

Dry Air Cleaner with clog indicator

Transmission

8 Forward + 8 Reverse, Mechanical Constant Mesh

Speeds

Forward : 3.16 to 32.01 kmph

Reverse : 4.79 to 13.71 kmph

Clutch

Dual Clutch : 11” x 11”

Reverse PTO, 6 splines

Brakes

Oil immersed brake with auto swing arrester

Harvester Tyre Size

Drive Wheel : 16.9 x 28 (12 PR)

Steering Wheel : 6.5 x 20 (8 PR)

Cutter Bar Assembly

Effective Width : 3600 mm

Working Width : 3900 mm

No. of Blades : 49

Cutting Platform

3280 mm (Dia.) x 3840 mm (Width)

No. of Scoops : 16

Blower

Dia. : 550 mm

Width : 1100 mm

No. of Blades : 4

Separating Mechanism

Sleeves : Adjustable Open Lip

No. of Walkers : 5

Low fuel consumption.

Conveniently placed directional control levers for lifting and lowering of cutter bar.

Cutter bar augur with prong for effective crop feeding.

Sturdy and long life reel design.

Chain drive system to increase transmission efficiency.

Multiple usage when tractor is dismounted from harvester combine during off season.

Post Hole Digger

Mahindra offers Post Hole Digger, it is a digging tool for a wide var iety of applications - like fencing/

tree plantations. Auger size can be decided as per the required hole size. The digging gets done at a faster pace and neater way as compared to manual digging. It is fastest method to dig up hole as it is driven by PTO.

Technical Data

Auger Length : 30"

Auger Flight Thickness : 1/4"

Auger Pipe : 2 ½" ID

Auger Teeth : Forged, Individually Replaceable

40 degree angle installed on flat side

50 degree angle installed on angled side

Number of Teeth : 6" - 2 teeth, 9" & 12" - 4 teeth

Pilot : Cast steel, 3 drill points

Driveline : Cat. II Shearbolt

Maximum Operating PTO Speed : 300 RPM

3-Point Hitch Cat. : Cat. I

Boom Tube : 2 7/8" O.D.

Yoke Tube : 2 7/8" O.D.

Options and Accessories

Auger Sizes (Options) : 6", 9" or 12"

Auger Extensions (Accessories) : 7" & 14" Extensions Available

Cat. III Torque Limiter Driveline : Not Available

Hydraulic Down Pressure Kit : Available

Storage Stand : Available

Features

It can dig up to diameter of 6", 9", 12", 18",24”.

Shorter yoke and boom tubing allows Post Hole Digger to be used on sub compact utility tractors also.

Replaceable hardened steel points on auger. Hardened points will last longer than non-hardened. Points can easily be replaced when worn or damaged.

3 Point hook up Design makes it possible to back up to the Post Hole Digger with a tractor and hook up and disconnect with ease and safety.

Storage capabilities Digger stand allows Post Hole Digger to be stored safely and efficiently. The stand allows easy hook up in future use.

Combine Harvester (Tractor Mounted)

Technical Data

Features

Type : Tractor Mounted Type

Engine

Model : NE 457

No. of Cylinder : 4

Rated RPM : 2100

Max. Torque : 21.4 kg-m

Engine HP : 56

PTO HP : 52

SFC : 176 gm/BHP Hr.

Air Cleaner

Dry Air Cleaner with clog indicator

Transmission

8 Forward + 8 Reverse, Mechanical Constant Mesh

Speeds

Forward : 3.16 to 32.01 kmph

Reverse : 4.79 to 13.71 kmph

Clutch

Dual Clutch : 11” x 11”

Reverse PTO, 6 splines

Brakes

Oil immersed brake with auto swing arrester

Harvester Tyre Size

Drive Wheel : 16.9 x 28 (12 PR)

Steering Wheel : 6.5 x 20 (8 PR)

Cutter Bar Assembly

Effective Width : 3600 mm

Working Width : 3900 mm

No. of Blades : 49

Cutting Platform

3280 mm (Dia.) x 3840 mm (Width)

No. of Scoops : 16

Blower

Dia. : 550 mm

Width : 1100 mm

No. of Blades : 4

Separating Mechanism

Sleeves : Adjustable Open Lip

No. of Walkers : 5

Low fuel consumption.

Conveniently placed directional control levers for lifting and lowering of cutter bar.

Cutter bar augur with prong for effective crop feeding.

Sturdy and long life reel design.

Chain drive system to increase transmission efficiency.

Multiple usage when tractor is dismounted from harvester combine during off season.

Post Hole Digger

Mahindra offers Post Hole Digger, it is a digging tool for a wide var iety of applications - like fencing/

tree plantations. Auger size can be decided as per the required hole size. The digging gets done at a faster pace and neater way as compared to manual digging. It is fastest method to dig up hole as it is driven by PTO.

Technical Data

Auger Length : 30"

Auger Flight Thickness : 1/4"

Auger Pipe : 2 ½" ID

Auger Teeth : Forged, Individually Replaceable

40 degree angle installed on flat side

50 degree angle installed on angled side

Number of Teeth : 6" - 2 teeth, 9" & 12" - 4 teeth

Pilot : Cast steel, 3 drill points

Driveline : Cat. II Shearbolt

Maximum Operating PTO Speed : 300 RPM

3-Point Hitch Cat. : Cat. I

Boom Tube : 2 7/8" O.D.

Yoke Tube : 2 7/8" O.D.

Options and Accessories

Auger Sizes (Options) : 6", 9" or 12"

Auger Extensions (Accessories) : 7" & 14" Extensions Available

Cat. III Torque Limiter Driveline : Not Available

Hydraulic Down Pressure Kit : Available

Storage Stand : Available

Features

It can dig up to diameter of 6", 9", 12", 18",24”.

Shorter yoke and boom tubing allows Post Hole Digger to be used on sub compact utility tractors also.

Replaceable hardened steel points on auger. Hardened points will last longer than non-hardened. Points can easily be replaced when worn or damaged.

3 Point hook up Design makes it possible to back up to the Post Hole Digger with a tractor and hook up and disconnect with ease and safety.

Storage capabilities Digger stand allows Post Hole Digger to be stored safely and efficiently. The stand allows easy hook up in future use.

Front End Loader

AppliTrac offers high quality, custom built front loaders. These are great tractor front end loaders. These loaders

are easy for installation and removal, and simplicity of use. Strongest bucket and superior lift capabilities are the key characteristic of Mahindra front end loaders.

Technical Data

Features

Loader attachment is designed for quick & easy detachment from the tractor, it saves changeover time and increase productivity.

Hardened pivoting pins with easy accessible greasing points, which ensures easy maintenance, low cost and longer life of the pins.

Superior quality cylinder and hoses, ensures failure free performance.

Model FEL-60

Max. Height to Hinge Pin 3385 mm

Max. Dump Height 2520 mm

Max. Dig Depth 80 mm

Reach at Ground 1950 mm

Reach at Max. Dump Height 850 mm

Wheel Base 2140 mm

Max Roll Back Angle at Ground 45 degree

Max Bump Angle 45 degree

Bucket Width 2000 mm

Payload Capacity 900 kg

Bucket Rated Capacity 0.67 cu.m

Compatible Tractor Arjun 605 DI (CE)

Laser Leveler

Laser land leveling is leveling the field within certain degree of desired slope using a guided laser beam throughout the

field.

Laser leveling smooths the land surface at an accuracy of ± 2cm from its average elevation using laser equipped drag buckets.

Soil is moved by cutting / filling to create the desired slope / level.

Technical Data

Laser transmitter Control panelLaser receiver

Laser leveler – Components

Leveling Bucket

Compatible Tractor Models :

Arjun Ultra-1 605 DI (All variants), Arjun Ultra-1 555 DI (All variants) and Sarpanch 595 DI

Features

A precisely leveled surface leads to uniform soil moisture distribution, resulting in good germination, enhanced input use efficiency and improved crop stand & yield.

Improved irrigation efficiency through better irrigation & run-off control resulting in lower potential for nutrient loss.

Uniformity in placement of seedlings, helping to achieve higher yields.

Improved water coverage reducing weeds, hence less time for crop weeding.

Facilitates movement of agricultural machinery. throughout the field as number of bunds are reduced.

Laser Type : 670 nm Class II

Accuracy : ±1.5 mm per 30 m

Operating Range : 1000 m Dia.

Slope Control : ±10% Single Axis

Scrapper Bucket

Drag Bucket : 1980 mm x 610 mm x 812 mm

Alloy Steel Scrapper Blade

2MT Double Acting Hydraulic Cylinder

Front End Loader

AppliTrac offers high quality, custom built front loaders. These are great tractor front end loaders. These loaders

are easy for installation and removal, and simplicity of use. Strongest bucket and superior lift capabilities are the key characteristic of Mahindra front end loaders.

Technical Data

Features

Loader attachment is designed for quick & easy detachment from the tractor, it saves changeover time and increase productivity.

Hardened pivoting pins with easy accessible greasing points, which ensures easy maintenance, low cost and longer life of the pins.

Superior quality cylinder and hoses, ensures failure free performance.

Model FEL-60

Max. Height to Hinge Pin 3385 mm

Max. Dump Height 2520 mm

Max. Dig Depth 80 mm

Reach at Ground 1950 mm

Reach at Max. Dump Height 850 mm

Wheel Base 2140 mm

Max Roll Back Angle at Ground 45 degree

Max Bump Angle 45 degree

Bucket Width 2000 mm

Payload Capacity 900 kg

Bucket Rated Capacity 0.67 cu.m

Compatible Tractor Arjun 605 DI (CE)

Laser Leveler

Laser land leveling is leveling the field within certain degree of desired slope using a guided laser beam throughout the

field.

Laser leveling smooths the land surface at an accuracy of ± 2cm from its average elevation using laser equipped drag buckets.

Soil is moved by cutting / filling to create the desired slope / level.

Technical Data

Laser transmitter Control panelLaser receiver

Laser leveler – Components

Leveling Bucket

Compatible Tractor Models :

Arjun Ultra-1 605 DI (All variants), Arjun Ultra-1 555 DI (All variants) and Sarpanch 595 DI

Features

A precisely leveled surface leads to uniform soil moisture distribution, resulting in good germination, enhanced input use efficiency and improved crop stand & yield.

Improved irrigation efficiency through better irrigation & run-off control resulting in lower potential for nutrient loss.

Uniformity in placement of seedlings, helping to achieve higher yields.

Improved water coverage reducing weeds, hence less time for crop weeding.

Facilitates movement of agricultural machinery. throughout the field as number of bunds are reduced.

Laser Type : 670 nm Class II

Accuracy : ±1.5 mm per 30 m

Operating Range : 1000 m Dia.

Slope Control : ±10% Single Axis

Scrapper Bucket

Drag Bucket : 1980 mm x 610 mm x 812 mm

Alloy Steel Scrapper Blade

2MT Double Acting Hydraulic Cylinder

AppliTrac offers excellent quality Hydraulic Reversible plough which is 100% German technology known

for their jerk free smooth operation, lesser number of moving parts and low maintenance. The Hydraulic Reversible Plough is remarkable for its heavy duty function. It is operated with the Hydraulic force making the equipment highly effective for the preparation of farming land. It is available in 2 sizes - 2 bottom & 3 bottom.

Hydraulic turn over device with double acting ram for safe and quick turn over action.

Specially heat treated mould board.

Adjustable plough body for pitch providing good penetration into the soil.

Hydraulic Reversible Plough

Technical Data

Features

Disc Plough

The disc plough is designed to work in all type of soil for basic functions such as soil breaking, soil raising, soil

turning and soil mixing. It is used to open the new fields and to process the stony areas. It can be used easily in rocky and rooted areas. It is specially useful in hard and dry trashy land conditions and in soils where scouring is a major problem.

Saves approx 35% time as compared to Mould Board Plough.

Adequate under-frame and bottom-to-bottom clearance to cope with trashy conditions.

Variable disc tilt angle with four stages for various types of soils.

Adjustable spring loaded furrow wheel to take care of the side draft.

Each disc has a scrapper blade to scrap the soil from the disc.

Construction of disc plough frame ensures perfect alignment of stub-beams carrying the Disc Bottoms providing meticulous perfect finish.

Each disc is mounted on hub bearing for free rotation as it cuts through the soil.

This rotation also provides self effect so that it wears out equally without breaking.

Mahindra disc ploughs can handle the toughest ploughing jobs.

Ideal for hard ground and soil with large roots & other obstructions.

Technical Data

Features

Parameter 2 furrow 3 furrow

Size 2x12” 2x14” 2x16” 3x12” 3x14” 3x16”

Working Depth 204 - 305 mm

Ground Clearance 700 mm

Inter Body Clearance 850 mm

Weight 470 kg 620 kg

Tractor HP 40-45 45-50 50-55 55-60 60-65 60-65

Parameter DP - 2/26 DP - 3/26

No. of discs 2 3

Overall Length (mm) 1600 1600

Overall Width (mm) 1321 1321

Overall Height (mm) 1270 1270

Dia. Of disc (mm) 660 660

Depth of cut (mm) 254 254

Total weight (kg) 331 385

Compatible Tractor 30 - 40 HP 40 - 50 HP