application instructions: marble macbook laptop skin / decal / sticker / top cover for macbook pro
TRANSCRIPT
ApplicAtion instructions
Marble MacBook Pro
Please read ALL STEPS before applying! **Photo Instructions + Additional Tips can be
found at: http://bit.ly/How-To-Apply
1
ApplicAtion instructions Marble MacBook Decal
Clean and dry the top surface of your laptop.
ApplicAtion instructions Marble MacBook Decal
2
Grab a credit card to use as a burnishing tool.
ApplicAtion instructions Marble MacBook Decal
Place your MacBook on a flat surface in front of you—with the opening facing you and the laptop completely closed.
3
ApplicAtion instructions Marble MacBook Decal
Very slowly peel the backing away from two corners along one of the longer edges of the decal.
4
ApplicAtion instructions Marble MacBook Decal
While holding the decal taut, line up the edge of the decal with the edge of your laptop; adhere lightly. Press the corner
pieces in place by pressing down for a few seconds (there are 2 pieces per corner that wrap around the rounded laptop corners). If the decal corners are not in alignment with your laptop corners, carefully peel back up and reposition. When
in alignment—press down with your thumbs.
5
ApplicAtion instructions Marble MacBook Decal
Push a credit card across the top of the decal to smooth out air bubbles—pushing air outward.
6
ApplicAtion instructions Marble MacBook Decal
Continue pulling the backing away in small increments (1-2”), smoothing with a credit card as you go.
7
ApplicAtion instructions Marble MacBook Decal
When you get to the end, ensure the corners are in alignment. Starting with one corner, apply pressure with your finger, and carefully peel the backing completely off the decal
on that side—then continue pulling until it is completely removed. Apply pressure to the opposite corner to secure the
decal completely.
8
ApplicAtion instructions Marble MacBook Decal
If one or more corners/edges is not completely secure, apply low heat from a hair dryer held at least 5 inches away for no
more than a few seconds per corner.
9
ApplicAtion instructions Marble MacBook Decal
Open your MacBook and watch it GLOW! Use the F1 and F2 keys in the left corner of your keyboard to
adjust logo brightness.
10
ApplicAtion instructions Marble MacBook Decal
EXtrA crEDit
Share a photo of your marbleized MacBook on social tagging @MarbleMacBook for your chance to win a monthly prize!
Questions? Comments? Please contact us directly at: [email protected]. Thanks!
Visit us at: MarbleMacBookDecals.com & Etsy.com/shop/MarbleDecals