apmen april 2013

86
TIMTOS 2013 REVIEW SEE MORE WITH MACHINE VISION ASX 2013 REVIEW The SRT series of 5-axis CNC mills offers multiple advantages, starting with the machine’s design configuration that utilizes a swivel head with either an A or C style rotary table. The generous size of the rotary table provides maximum versatility because you can use the extra table space for secondary operations or 3-axis work. offers true 5-axis capability with maximum flexibility Hurco VMX42SRT 5-Axis CNC Mill ADVERTISEMENT www.equipment-news.com April 2013

Upload: eastern-trade-media

Post on 07-Mar-2016

252 views

Category:

Documents


10 download

DESCRIPTION

Asia Pacific Metalworking Equipment News

TRANSCRIPT

Page 1: APMEN April 2013

TIMTOS 2013 RevIew See MORe wITh MachIne vISIOn aSX 2013 RevIew

The SRT series of 5-axis CNC mills offers multiple advantages, starting with the machine’s design configuration that utilizes a swivel head with either an A or C style rotary table. The generous size of the rotary table provides maximum versatility because you can use the extra table space for secondary operations or 3-axis work.

offers true 5-axis capability with maximum flexibility

Hurco VMX42SRT 5-Axis CNC Mill

ADVE

RTIS

EMEN

T

www.equipment-news.com

April 2013

Page 2: APMEN April 2013

SINO TOOLING SYSTEMBlk 502, Jurong West Ave 1 #03-813 Singapore 640502Tel + 65 6566 7668 Fax + 65 6567 7336 [email protected]

ISCAR THAILAND57, 59, 61, 63 Soi Samanchan-BabosSukhumvit Rd. Phra Khanong, Khlong Toey Bangkok 10110Tel + 66 (2) 7136633Fax + 66 (2) [email protected]

CV MULTI TEKNIKRuko Gsa Blcok B No. 8 BN-BP, Podomoro City JL.Letjen S.parman Kav.28Jakarta Barat 11470 Indonesia Tel + 62 21 29206242/44/45/59Fax + 62 21 [email protected]

ISCAR JAPAN 1-5-3 Shinsenri-HigashimachiToyonaka-shi, Osaka 560-0082Tel + 81 6 835 5471Fax + 81 6 835 [email protected]

MESCO Reliance CornerBrixton St. Pasig CityMetro-Manila Philippines Tel + 63 2631 1775Fax + 63 2635 [email protected]

ISCAR TAIWAN395, Da Duen South Rd. Taichung 408Tel +886 (0)4 247 31573Fax +886 (0)4 247 [email protected]

ISCAR VIETNAM (Representative Office) Room D 2.8, Etown Building, 364 Cong Hoa, Tan Binh Dist., Ho Chi Minh City, Tel + 84 8 8123 519/20 Fax + 84 8 8123 [email protected]

www.iscar.com

Helical Triangular Insert with 3 Cutting Edges

HM390 TPKT Insert• High Positive 90° Shoulder• Heli Cutting Edge for Soft and Easy Cut • Less Vibration and Low Power

Consumption • Machines up to 13 mm Depth of Cut

BrilliantMilling

HELIMILL

3 HELIcaL

cuttIng EdgEs

8.090º

1

32

ENQUIRY NO 092

Page 3: APMEN April 2013

OKUMA TECHNO (THAILAND) LTD. SINGAPORE BRANCHSingapore, Malaysia, Philippines275, Kaki Bukit Avenue 1Shun Li Industrial Park416072, SingaporeTel: (+65) 6214-0112Fax: (+65) 6214-0076Email: [email protected]

Machining Navi

ENQUIRY NO 198

Machining Navi Garners 4 AwardsMachining Navi productivity improvement technology acclaimed in various countries

2011Japan Society of Die/MoldTechnology (Incentive Award)Awarded to outstanding papers presented at the die engineers meeting and die technology workshop.

2010Japan Society of MechanicalEngineers Medal (Technology)presented by JSME to encourage further advancements in Japanese mechanical engineering and industry.

2010MM] Award (Germany)Given by leading German technical journal Maschinemarket for innovative products and technologies.

2011Innovation Award(France)presented to innovative products reviewed by prominent French technical journals.

Machining Navi instantly determines the optimal cutting conditions for highly efficient machining. Spindle speed and chatter are linked in a periodic manner,manifestingasalternatingrangeswithandwithoutchatter.Thismeansthat therewillbecases inwhichchattercannotbesuppressedwithareductioninspindlespeed,andothercaseswhereincreasingthespindlespeedwilleliminatethechatter.MachiningNavinavigatestheextremelydifficultprocessoffindingtheoptimalspindlespeedvalue. Machining Navi analyzes chatter and instantly determines theoptimalspindlespeed. Machining Navi M-g (Guidance) Machining Navi displays a number of optimal spindle speedpossibilities on the screen. The operator can change to the indicatedspindlespeedwithasingletouchandimmediatelyconfirmtheresult.

Machining Navi M-i (Intelligence) Machining Navi automatically switches the spindle speed to theoptimalsetting. Inotherwords, thesystemmeasures thevibrationandcalculatesthe optimal spindle speed, automatically integrating the process ofmodifyingspindlespeedcommands.

Customer ExamplesExample1: 47.5%increaseinrotationspeedeliminatedchatter! (A7075 20( 0.78),4-fluteendmill).Example2: Machiningefficiencyincreasedafull500%! (STAVAXDie/Mold 16( 0.63),4-fluteendmill).Example3: Adifferenceofjust7rpmeliminateschatter! (S45C 63( 2.48)millingcluster).Example4: Machiningefficiencyincreaseda150%! (FC300 230( 9.06)sidecutter).

For Machining Center

For Lathe

OKUMA TECHNO (THAILAND) LTD.Thailand, Vietnam47/291 Kaitak Building, Unit C, Moo 3, Popular 3 Rd.T.Banmai, A.PakkredNonthaburi 11120 ThailandTel: (+66) 2-980-5547~8Fax: (+66) 2-980-5549Web site: www.okuma.co.jp www.okuma.co.th

PT. OKUMA INDONESIAIndonesiaMall of Indonesia, French Walk, Unit RK 0F061 Jl, Boulevard Barat Raya Kelapa Gading Square, Jakarta Utara 14240, IndonesiaTel: (+62) 21-4586-9261Fax: (+62) 21-4586-9264

Page 4: APMEN April 2013

www.equipment-news.comasia pacific metalworking equipment news April 20132

24 Case Study: Grinding With Quality & SpeedOne company has claimed that it is possible to grind gearshafts faster than ever without compromising quality. Contributed by Christine Isenmann, Erwin Junker Maschinenfabrik

30 Incorporating FPGA Technology In Machine VisionA graphical programming environment is said to be the key that paves the way for the utilisation of FPGA image processing in vision systems. By Wu Rong, National Instruments

36 Case Study: Optical 3D Inspection Of Weld Seam Weld seam inspection systems are used to ensure that the required quality standards for welded seams are met in an automobile factory. By Dipl Ing Markus Maurer, Vitronic

CUTTING EDGE22Software Programs Byte-ing Into GrindingGrinding these days is enabled by software programs as much as the grinding wheel. By Dipl Ing Ira Schroers

SOFTWARE & METROLOGY38 Going 'Soft' On MachiningReducing cycle time and improving surface finishing is now a software program’s job. By Maggie Smith, Hurco Companies

TECH TALK26 Machine Vision To Facilitate Reliable Production From the automotive to medtech sectors, manufacturers in Southeast Asia are looking towards better quality control methods. By Didier Lacroix, Cognex

CONTENTSApril 2013

42Precision Under HeatCNC machining is favoured for its ability to automate large batch processing while maintaining the precision of parts. Yet, it faces the challenge of thermal errors, whose effects could compromise machining accuracy. By Sherlyne Yong

FORMJOINCUT46 Energy Reduction In BendingReducing energy consumption during ‘idle’ time and studying actual power consumption figures can lead to energy-efficient bending. By Matthew Fowles, LVD

Page 5: APMEN April 2013

Best choice.

Bystronic iPhone + Android App

With Bystronic already the present – for others still the future

Xpert: The pressbrake for maximum repetition accuracy at the touch of a button. Now with ByVision Bending, the 22-inch touchscreen control system for uncompromising user  ergonomics. It doesn’t get any easier.

Laser | Bending | Waterjetbystronic.com

Best choice.

Bystronic iPhone + Android App

With Bystronic already the present – for others still the future

Xpert: The pressbrake for maximum repetition accuracy at the touch of a button. Now with ByVision Bending, the 22-inch touchscreen control system for uncompromising user  ergonomics. It doesn’t get any easier.

Laser | Bending | Waterjetbystronic.com

Visit us at

16-19 May 2013 • Booth no: N12

ENQUIRY NO 093

Page 6: APMEN April 2013

www.equipment-news.comasia pacific metalworking equipment news April 20134

CONTENTS

80pgREGULARS08 Business News76 Product Finder79 Exhibition Programmes80A Product Enquiry Card

Refer to Advertising Index

For Advertiser's Enquiry Numbers

ASIA PACIFIC METALWORKING EQUIPMENT NEWS (M.E.N.) is published 8 issues per year by Eastern Trade Media Pte Ltd1100 Lower Delta Road, EPL Building #02-05 Singapore 169206 Tel: (65) 6379 2888 Fax: (65) 6379 2806.

SUBSCRIPTION RATES: M.E.N. is available to readers on a per annum subscription basis depending on location: Singapore: S$60.00, Malaysia: S$60.00, Asia Pacific/America/Europe/Others: S$100.00. Refer to the subscription card in each issue for further details. For change of address, please notify our Circulation Manager. For more subscription information Fax: (65) 6379 2806 Singapore E-mail: [email protected]

Federation of Asian Die & Mould Associations (FADMA)

China Machine Tool & Tool Builders'

Association (CMTBA)

Indian Machine Tool Manufacturing

Association (IMTMA)

Federation of Malaysian Foundry & Engineering

Industry Associations

Singapore Precision Engineering and Tooling Association (SPETA)SPETA

INDUSTRYEndorsements

Machine Tool Club(MTC)

IMPORTANT NOTICETHE CIRCULATION OF THIS MAGAZINE

IS AUDITED BY BPA WORLDWIDE.

THE ADVERTISERS' ASSOCIATION

RECOMMEND THAT ADVERTISERS

SHOULD PLACE THEIR ADVERTISEMENTS

ONLY IN AUDITED PUBLICATIONS

Taiwan Association of Machinery Industry (TAMI)

April 2013

58Technical Seminar: Automated To FabricateWhen considering automation solutions for sheet metalworking, looking at the big picture helps in better decision making. By Joson Ng

EVENTS & EXHIBITION 65Productivity Is Vital For Singapore’s Aerospace Industry Arguably one of the more competitive industries for Singapore, the aerospace industry needs to do more to maintain their lead in the region. By Joson Ng

Measured For AccuracyMaintaining the accuracy of CMM measurements requires a multi-faceted approach, where precision is dependent on a myriad of factors. By Sherlyne Yong

Event Review: Indometal

Event Preview: Metaltech

Event Preview: Intermach 2013

Event Preview: MTT Indonesia

INDUSTRY FOCUS56 The Future Lies In TubingMany success stories have shown that cutting tubes with lasers offer wider perspectives, both for steel dealers and for job shops that until now have been involved in 2D laser cutting. By Evelyn Konrad, Trumpf

54The Pressing Issue Of CFRPsManufacturing CFRP parts by forming is now a more desirable process. By Simon Scherrenbacher, Schuler

FEATURES60TAMI Optimistic About 2013By their own admission, 2012 was not a very good year for Taiwan’s machine tool industry. The year 2013 however, is a very different story. By Joson Ng

50Pressing OnAsia Pacific Metalworking Equipment News (APMEN) caught up with technical experts in the metal forming world to talk about the present and the future of metal forming. By Joson Ng

Page 7: APMEN April 2013

ENQUIRY NO 017

Page 8: APMEN April 2013

Editor’sNotE

www.equipment-news.comasia pacific metalworking equipment news April 20136

Published by:

EAstErn trAdE MEdiA PtE Ltd (a fully owned subsidiary of Eastern Holdings Ltd)

Reg No: 199908196C

Head Office & Mailing Address:1100 Lower Delta Road,EPL Building #02-05, Singapore 169206 Tel: (65) 6379-2888 Fax: (65) 6379-2806

etm EasternTrade Media Pte Ltd

an Eastern Holdings Ltd company

managing director Kenneth Tan

editor Joson Ng [email protected]

business development manager Randy Teo [email protected]

senior sales manager Derick Chia [email protected]

sales manager Melvin Wong [email protected]

editorial assistant Sharifah Zainon [email protected]

graphic designer Jef Pimentel [email protected]

circulation executive Samantha Tan [email protected]

contributorsDipl Ing Ira SchroersChristine IsenmannDidier LacroixWu RongDipl Ing Markus MaurerMaggie SmithSherlyne YongMatthew FowlesSimon ScherrenbacherEvelyn Konrad

board of consultants Wäinö A Kaarto AB Sandvik Coromant

dr Moshe Goldberg ISCAR

All rights reserved. No portion of this publication covered by the copyright herein may be reproduced in any form or means – graphic, electronic, mechanical, photocopying, recording, taping, etc – without the written consent of the publisher. Opinions expressed by contributors and advertisers are not necessarily those of the publisher and editor.

Printed in Singapore by Fabulous Printers Pte Ltd

MICA (P) No. 098/06/2012PPS 840/09/2012 (022818)ISSN 0129/5519

Knowing one’s strength and playing to it is often the advice coaches pass to their charges. This tactic or philosophy has led to many victories for the ‘Davids’ of this world, where they triumphed against all odds while their bigger, stronger, and seemingly infallible opponents flounder.

In the machine tool manufacturing world where European and Japanese machines dominate, it is probably fair to call Taiwan’s machine builders ‘David’, in a relative sense. While its price-competitiveness is well-documented, the Taiwanese machine tool manufacturing industry is less known for its flexibility.

This flexibility is evident at TIMTOS, Taiwan’s answer to IMTS, JIMTOF and EMO. On the business front, the government has lined up various FTAs with many countries across the world, such as Singapore and New Zealand. The government is also actively pursuing other agreements like the Trade and Investment Framework Agreement (or TIFA), the Regional Comprehensive Economic Partnership (RCEP) and the Trans-Pacific Partnership (TPP).

In technology, some exhibitors are showing dual spindle machining centre, twin spindle lathe with three turrets and some are also incorporating fibre lasers into sheet metal cutting.

Focusing on core strengths like flexibility may be essential, but developing new strengths can enable long term prosperity. In a bid to increase the profile of their companies in an established industry and to possibly squash stereotypes, some companies are willing to invest big and travel far.

For example, FFG or Fair Friend Group has revealed that they have the second largest booth in this year’s EMO. Having a second largest booth in any trade show is a statement but going to Europe and Germany in particular, arguably the technology capital of the machine tool world, is nothing short of gutsy. It may be a big statement of intent no doubt, or a marketing master stroke maybe, but this move has shown a new level of maturity in Taiwan’s machine tool builders.

Joson NgEditor

chairman Stephen Taygroup executive director Kenneth Tan

EastErn HOLDInGs LtDExEcutIvE BOarD

Of David

The CuriousCase

Page 9: APMEN April 2013

win

terg

erst

& fa

iss

powered by Tiger·tec® Silver

The new generation of mills from WalterBlaxx™ stands for a reliable system which captivates the user with its absolute precision and stands out through its extremely high productivity. The Blaxx™ F5041 and F5141 shoulder mills are therefore based on a newly developed, incredibly robust tool body, which is fitted with the most efficient of Walter indexable inserts, powered by Tiger·tec® Silver.

Find out more about the unbeatable combination of Blaxx™ and Tiger·tec® Silver now: www.walter-tools.com

Walter AG Singapore Pte Ltd20 Science Park Road#01-04A/05, Teletech ParkSingapore Science Park IISingapore 117674Tel: +65 [email protected]

Watch trailer:

PoWerfuL, PreciSe, reLiAbLe.

AZ_W_Mi_Blaxx_EN_WSG_205x275_RZ_000dpi.indd 1 19.09.12 10:37

ENQUIRY NO 084

Page 10: APMEN April 2013

Kennametal Celebrates 75 Years

Latrobe, US: Kennametal marks its 75th year as an industrial technology leader, delivering productivity, innovation and performance around the world in the aerospace, earthworks, energy, industrial production and transportation industries.

Founded in 1938, Phil ip McKenna’s breakthrough invention of tungsten-titanium carbide alloys started a company of 12 employees

and US$30,000 in revenues in its first year. Since then, the company he founded — subsequently renamed Kennametal — has grown 100,000-fold to nearly US$3 billion in revenues, serving more than 80,000 customers in over 60 countries.

“We drive a strong culture of innovation and performance at Kennametal, starting with knowledgeable people and proprietary material science

to develop bet ter tool ing technologies and engineered components for the world’s most demanding work,” said Carlos Cardoso, Kennametal chairman, president and CEO. “Today, we consistently achieve 40 percent or more of sales each year from new products that offer customers at least 20 percent performance improvement.”

Named Among World’s Most Ethical CompaniesThe company has been named for the second year in a row as one of the World’s Most Ethical Companies by The Ethisphere Institute, an international think-tank dedicated to the creation, advancement and sharing of best practices in business ethics, corporate social responsibility, anti-corruption and sustainability.

Through in-depth research and a mult i - step ana lysis, Ethisphere reviewed nominations from companies in more than 100 countries and 36 industries.

Malaysia Government & Private Sector In Partnership To Promote Metrology

Malaysia: In the month of March 2013, Region Suppliers, a distributor of precision measurement instrument, organised seminars in Johor Bahru and Kuala Lumpur, Malaysia. According to the organiser, as the seminars were supported by NML – Sirim, this marks the first collaboration between the government and a company from the private sector

in promoting the importance of industrial metrology in Malaysia.

“We are very honoured to have the co-operation and support from NML-Sirim, who plays a very important role in the dissemination of measurement traceability in Malaysia and ensuring that metrological infrastructures in the country meet the current international standard, which is our

common objective for this seminar,” said Roger Michell, chairman of Region Suppliers Group.

More than 150 participants from all industrial sectors attended the event and listened to the keynote speech, which was delivered by Dr Wan Abd Malik Wan Mohamed, principal metrologist/head of Mechanical Metrology Section of NML-Sirim.

www.equipment-news.comasia pacific metalworking equipment news April 20138

Businessnews

Page 11: APMEN April 2013

Singapore +65 6274 1222 Philippines +63 2 915 8725

Malaysia +603 5569 5901 +6019 6631 901

Haas Factory OutletVietnam +84 8 38 44 71 92

Indonesia +6221 29094177

Thailand +66 2726 7191 +66 3811 2700

www.HaasCNC.com

E-Z setup

Machine 4 sides

Repeat (max profit)

The EC-400 | 4 axes with twin pallets | Affordable Haas price.

Horizontal Edition

ENQUIRY NO 082

Page 12: APMEN April 2013

I r v i n e , U S : C G Te c h , t h e developer of Vericut software has celebrated a quarter-century of developing Numerical Control (NC) program simulation and analysis software.

Since its init ia l release, Vericut has been constantly

Vericut Software Reaches 25-Year Milestone

Quality Control At Your Fingertips

G e r m a ny : Fo r p r o d u c t i o n operations, quality assurance over the process chain is indispensible: it is the only way to detect problems at an early stage and lower additional

costs. Fraunhofer researchers developed an efficient type of quality control: With a pointing gesture, employees can input any detected defects to car body parts into the inspection system, and document them there.

Researchers at the Fraunhofer Institute for Optronics, System Technologies and Image Exploitation IOSB in Karlsruhe engineered the gesture control system on behalf of the BMW Group.

In the future, it should supersede today’s test procedures. “Previously, the inspector had to note all defects that were detected, leave his workstation, go to the PC terminal, operate multiple input screens and then label the position of the defect and the defect type. That approach is laborious, time-intensive and prone to error,” says Alexander Schick, scientist at IOSB. The gesture control system, by contrast, improves the inspector’s working conditions considerably, and

Fraunhofer IOSB

triggers time savings — the employee can remain at his workstation and interact directly with the test object. “If the bumper is fine, then he swipes over it from left to right. In the event of damage, he points to the location of the defect,” says Mr Schick.

3D Tracking Works In Real TimeThis non-contact gesture-detection system is based on 3D data. As such, the entire workstation must first be reconstructed in 3D. That includes the individual as well as the object with which the operator is working on. “What does the inspector look like? Where is he situated? How does he move? What is he doing? Where is the object? All of these data are required so that the pointing gesture can properly link to the bumper,” explains the researcher.

In order to enable gesture control, the experts apply 3D-body tracking, which records the individual’s posture in real time. Even the car body parts are ‘tracked’. When it comes to this, the hardware requirements are minimal: A standard PC and two Microsoft Kinect systems — consisting of camera and 3D sensors — are required to realise the reconstruction. Mr Schick and his team developed the corresponding algorithms, which fuse multiple 2D and 3D images together, specifically for this kind of application, and adapted them to the standards of the BMW Group.

The technology can be subsequently integrated into existing production systems at little expense. Scientists could incorporate their effective process into the BMW Group’s system through a specialised interface module.

enhanced in-house by a team of software engineers who have many years of experience in the mechanical CAD/CAM industry.

I n a d d i t i o n to r e g u l a r enha ncements to i t s core algorithms, products have been added to optimise feed rates

and simulate the kinematics of complex multi-axis and multi-spindle CNC machine tools. The company has also recently released new products for companies utilising automated composite machiner y, a nd drilling and fastening machines.

www.equipment-news.comasia pacific metalworking equipment news April 201310

Businessnews

Page 13: APMEN April 2013

TaeguTec Ltd. World Headquarters304 Yonggye 4-ri, Gachang-myeon, Dalseong-gun, Daegu 711-864, KOREATel: +82-53-760-7640 Fax: +82-53-768-8055 http://www.taegutec.com

Argentina _ Australia _ Belarus Rep. _ Belgium _ Brazil _ Chile _ China _ Croatia _ Czech Rep. _ Denmark _ Egypt _ Finland France _ Germany _ Greece _ Hungary _ India _ Indonesia _ Ireland _ Italy _ Japan _ Malaysia _ The Netherlands _ New ZealandNorway _ Pakistan _ Philippines _ Poland _ Portugal _ Romania _ Russia _ Serbia _ Singapore _ Slovakia _ Slovenia _ South Africa Spain _ Sweden _ Taiwan _ Thailand _ Turkey _ Ukraine _ United Arab Emirates _ United Kingdom _ U.S.A _ Vietnam

Smaller & Stronger than conventional ISO turning insert Next generation clamping system – Two directional clamping force Excellent productivity and longer, stable tool life

RH

INOTURN

ENQ

UIR

Y N

O

10

1

Page 14: APMEN April 2013

Studer Produced 1,000th S33

Switzerland: Studer produced the one thousandth machine in its S33 series in the hundredth year since the company's foundation. The Swiss company celebrated this event during the 16th Indian Machine Tool Exhibition IMTEX,

Rock Hill, US: 3D Systems has received the Financial Times and ArcelorMittal ‘Boldness in Business’ Award recognising companies, entrepreneurs and individuals who, through bold decisions, drive change, inspire innovation and deliver outstanding economic performance.

The company invented the first 3D printing technology almost 30 years ago, changing the way people develop and manufacture their products. Through continuous innovation, 3D Systems’ content-to-print solutions transformed entire industries. According to the award sponsors, winning companies stand out by making the boldest decisions to change their business model, delivering sustainable and scalable economic and social impact.

3D Systems Receives Award

Hexagon Metrology Expands & Relocates In Singapore

Singapore: Hexagon Metrology has expanded and relocated its Asia Pacific headquarters to a new and larger space in Singapore. The official grand opening took place on February 18, 2013 with Norbert Hanke, CEO & president of Hexagon Metrology and Claudio Simao, president of Hexagon Metrology APAC inaugurating the office.

“We see this move as a positive change towards a bright future for the organisation and its employees. Further, this change reflects our confidence in our ability to continuously grow and provide high quality products, services and support to all our customers,” said Mr Hanke.

which took place earlier this year. Back in 1996, the company

launched the S30leanPro, which has the ‘All in One’ solution (using several grinding wheels on one and the same machine), and became known as a compact and flexible

universal cylindrical grinding machine with two external grinding wheels and one belt-driven internal grinding wheel. An innovation at this time was the creation of grinding and dressing programs using pictogramming.

Over the course of time, market-specific variants of the S33 were developed. The KC33 was built specifically for the Chinese market, by Körber Schleifring Machinery Shanghai. The favoritCNC was built as a simple variant for the Eastern European and American markets, and the ecoGrinder as the best process-accessible version for the Asian continent.

Visit us at these shows!

www.equipment-news.com

Intermach (Thailand) May 16-19

Metaltech (Malaysia) May 21-25

www.equipment-news.comasia pacific metalworking equipment news April 201312

Businessnews

Page 15: APMEN April 2013

ENQUIRY NO 091

Tungaloy Singapore Pte. Ltd.31 Kaki Bukit Road 3#05-19 TechlinkSingapore 417818Tel: (65) 6391 1833 • Fax: (65) 6299 4557www.tungaloy.co.jp/tspl/

Page 16: APMEN April 2013

World Bank To Support Vietnam’s Economic Reforms

Washington, US: The World Bank Board of Directors has approved the first Economic Management and Competitiveness Credit for Vietnam, EMCC 1, to help the country with economic management reforms for higher productivity and competitiveness.

The EMCC 1, the first of a series of three operations, provides US$250 million concessional financing to support reforms in seven policy areas: financial sector; fiscal policy; public administration and accountability; state enterprise management; public investment management; efficiency of the business environment; and equity and transparency of the business environment.

“The EMCC follows on from the successful Poverty

Roberto Colonello, Merano, Italy

Reduction Support Credit series, and aims to address new challenges that will raise the efficiency and competitiveness of the Vietnamese economy,” said Victoria Kwakwa, the World Bank country director for Vietnam.

“I hope that the EMCC series will provide a platform for deepening and coordinating dialogue between development partners and the government of Vietnam with a view to helping Vietnam transition to a new economic growth model, which targets competitiveness and the quality of growth.”

Macroeconomic stability is a major priority for competitiveness in Vietnam, and a core objective of EMCC. The EMCC will help monitor macroeconomic policies and ensure that it supports the stabilisation efforts of the government.

Public Investment Management, SOE and banking sector reforms are prominent themes under the program, in line with the government’s priorities for structural reforms. In addition, the EMCC prioritises government efforts to streamline administrative procedures and strengthen fiscal discipline because they are critical to productivity and competitiveness.

www.equipment-news.comasia pacific metalworking equipment news April 201314

Businessnews

What products will you be manufacturing tomorrow? Discover your full potential: The new TruLaser Tube 7000.

Laser is a versatile tool that not only gives you greater flexibility when cutting tubes but is faster and cheaper too. Expand your range with TRUMPF, the world leader in laser technology, and enter new worlds of design possibilities. www. sg.trumpf.com/tube-potential

TRUMPF_TruLaser_Tube7000_EN_410x127.indd 2-3 14.03.13 11:05

Page 17: APMEN April 2013

Fab Equipment Spending To Go Up 24 Percent In 2014: SemiSan Jose, US: Fab equipment spending for front end facilities is expected to be flat in 2013, remaining around US$31.7 billion, increasing to US$39.3 billion in 2014 — a 24 percent increase. The Semi World Fab Forecast also reveals that in 2013, increases for fab equipment spending will vary by technology node and that fab construction spending will increase an overall 6.7 percent with major spending in China.

Despite these adjustments, the overall forecast for equipment spending for 2013 has remained about the same. Depending on macro-economic risk factors, possible scenarios project a range of -3 percent to +3 percent change rate for fab equipment spending in 2013; in other words, hovering around flat.

Although the overall outlook has improved, fewer players in the market can afford the rising costs for R&D and upgrading facilities as the amount of money needed to upgrade facilities at the leading edge technologies is immense. The report shows fab equipment spending for 17 nm and below is expected to kick off in 2013 and

increase by a factor of 2.4 to about US$25 billion from 2013 to 2014.

Fab construction spending is now expected to increase 6.7 percent with construction spending to reach almost US$6 billion. In 2014, however, construction project spending is expected to contract by about 18 percent. Construction spending is led by TSMC, with seven different projects for the year; followed by Intel. Fab construction spending in China will increase by a factor of four due to Samsung’s mega fab in Xian.

Capacity is now forecasted to expand by just 2.8 percent for this year and to improve to 5.4 percent growth in 2014. Excluding 2009, the years 2012 and 2013 show the lowest growth rate for new capacity over the past 10 years. However, pent-up demand is expected for some product types because capacity additions have been cut to minimum levels while chip demand keeps increasing.

Capacity additions and equipment spending are expected to pick up in the second half of 2013. In 2014, at least five percent in new capacity will be added and fab equipment spending will increase by 24 percent.

April 2013 asia pacific metalworking equipment news www.equipment-news.com 15

Businessnews

ENQ

UIR

Y N

O

09

5Trumpf

AD

What products will you be manufacturing tomorrow? Discover your full potential: The new TruLaser Tube 7000.

Laser is a versatile tool that not only gives you greater flexibility when cutting tubes but is faster and cheaper too. Expand your range with TRUMPF, the world leader in laser technology, and enter new worlds of design possibilities. www. sg.trumpf.com/tube-potential

TRUMPF_TruLaser_Tube7000_EN_410x127.indd 2-3 14.03.13 11:05

Page 18: APMEN April 2013

Malaysian Economy To Expand 5 - 6% In 2013: Bank Negara Malaysia

Malaysia: The Malaysian economy is expected to remain on a steady growth path, with an expansion of five to six percent in 2013. Economic activity will be anchored by the continued resilience of domestic demand, and supported by a gradual improvement in the external sector. Private investment is expected to remain robust, driven by capacity expansion by the domestic-oriented firms and the continued implementation o f p r o j e c t s w i t h l o n g gestation periods.

Investments by the external-oriented businesses is also expected to be higher amid the gradual improvement in external demand, while private consumption is projected to grow at a more moderate rate in the second half of the year, although it will continue to be well supported by sustained income growth and positive labour market conditions.

Government spending is expected to record a lower growth given the ongoing consolidation of the government’s fiscal position and as the role of the private

Lee Pei Rei, Kuala Lumpur, Malaysia

Italian Technology Centre Inaugurated At Pune Italy: Italian Technology Center (ITC), the centre for the promotion of the Italian industry of capital goods, was inaugurated on March 6, 2013 in Pune, India. It was born from a network agreement signed by 11 companies manufacturing machine tools and plastic processing machines.

sector gains greater significance. In line with the more favourable external sector, gross exports are projected to record a higher growth in 2013 supported by the export of manufactured products.

Gross imports are expected to moderate, in tandem with the projected trend in domestic demand. Overall, this is expected to result in a lower negative contribution to real GDP from net exports. As import growth continues to outpace export growth amid the continued deficit in the income account and in current transfers, the current account surplus, while still remaining significant is expected to narrow further in 2013.

On the supply side, a l l major economic sectors are expected to record continued expansion in 2013. The services and manufacturing sectors are expected to be the key contributors to overall growth, driven by the continued resilience of domestic demand and supported by higher international trade activity.

Growth in the construction

sector is projected to remain strong, supported by the implementation of major infrastructure projects. In the commodities sector, the growth of agriculture is expected to improve due to the higher output of crude palm oil and food commodities while the mining sector is expected to strengthen following the higher production of natural gas, crude oil and condensates.

Headline inflation is expected to average two to three percent in 2013. This inflation projection takes into account the expected higher global prices of selected food commodities and the adjustments to domestic administered prices. Demand-driven price pressures are expected to be moderate. The wider forecast range reflects the greater uncertainty in the external and domestic environment.

Given the challenging external environment, there will be risks to the economic outlooks. The potential re-emergence of instability in the Euro area and slower growth in Malaysia’s major trading partners would affect the Malaysian economy.

W h i l e p r e s s u r e s f r o m global commodity prices have receded, upside risks from non-fundamental factors, such as adverse weather conditions and geopolitical developments, could push commodity prices higher and adversely affect the growth prospects of economies that are major trading partners of Malaysia. Potential upside to the domestic economy could emerge if the recovery in the advanced economies turns out to be better than expected.

Promoted by UCIMU-Sistemi Per Produrre and Assocomaplast, reference associations for the two sectors which the network companies belong to, ITC is part of the initiatives established by the Ministry of Economic Development and Federmacchine, the federation of manufacturers of capital goods.

www.equipment-news.comasia pacific metalworking equipment news April 201316

Businessnews

Page 19: APMEN April 2013

www.hexagonmetrology.com

Indonesia(Representative Office)Hexagon Metrology Asia Pacific Pte. Ltd.Tel: + 65 6463 6242Fax: + 65 6463 [email protected]

MalaysiaHexagon Measurement Technologies Sdn. Bhd.Tel: +60 3 5632 8900Fax: +60 3 5632 [email protected]

SingaporeHexagon Metrology Asia Pacific Pte. Ltd.Tel: +65 6463 6242Fax: +65 6463 [email protected]

ThailandHexagon Metrology (Thailand) Ltd.Tel: +66 2 361 3695 to 9Fax: +66 2 746 [email protected]

Vietnam(Hanoi Representative Office)Hexagon Metrology Asia Pacific Pte. Ltd.Tel: +84 4 3936 7935Fax: +84 4 3936 [email protected]

Vietnam(Ho Chi Minh Representative Office)Hexagon Metrology Asia Pacific Pte. Ltd.Tel: +84 8 5445 6665Fax: +84 8 5445 [email protected]

PWTC, Kuala LumpurMalaysia

Hall 5, Booth No. 5200

YOUR NEW COMPACT SIZE TOOL WITHHIGH PERFORMANCE

The CMS 106 laser scanning probe provides many benefits for metrology in a complete and powerful turnkey package via rapid point-cloud capture, including: Feature inspection to CAD (Thin walled/ sheet metal parts), free form surface inspection to CAD and reverse engineering.

The probe is available on Hexagon Metrology GLOBAL, ALPHA, DELTA, LAMBDA & BRAVO CMMs, allowing for integrated scanning operations.

CMS-106 Laser Scanner3D point scanning at its best

Global Performance 03.04.03, a new compact size and flexible coordinate measuring machine (CMM) from Hexagon Metrology. Industry proven ultra rigid structure, advanced motion controller and superior measuring software, ensure high reliability and high performance for the measurement operation.

The machine is ideal for both single point touching and high-speed continuous scanning of profiles and complex geometries.

Global Performance 03.04.03Compact size with high performance

Ad for APMEN magazine April 2013.indd 1 21-03-2013 15:51:00

www.hexagonmetrology.com

Indonesia(Representative Office)Hexagon Metrology Asia Pacific Pte. Ltd.Tel: + 65 6463 6242Fax: + 65 6463 [email protected]

MalaysiaHexagon Measurement Technologies Sdn. Bhd.Tel: +60 3 5632 8900Fax: +60 3 5632 [email protected]

SingaporeHexagon Metrology Asia Pacific Pte. Ltd.Tel: +65 6463 6242Fax: +65 6463 [email protected]

ThailandHexagon Metrology (Thailand) Ltd.Tel: +66 2 361 3695 to 9Fax: +66 2 746 [email protected]

Vietnam(Hanoi Representative Office)Hexagon Metrology Asia Pacific Pte. Ltd.Tel: +84 4 3936 7935Fax: +84 4 3936 [email protected]

Vietnam(Ho Chi Minh Representative Office)Hexagon Metrology Asia Pacific Pte. Ltd.Tel: +84 8 5445 6665Fax: +84 8 5445 [email protected]

PWTC, Kuala LumpurMalaysia

Hall 5, Booth No. 5200

YOUR NEW COMPACT SIZE TOOL WITHHIGH PERFORMANCE

The CMS 106 laser scanning probe provides many benefits for metrology in a complete and powerful turnkey package via rapid point-cloud capture, including: Feature inspection to CAD (Thin walled/ sheet metal parts), free form surface inspection to CAD and reverse engineering.

The probe is available on Hexagon Metrology GLOBAL, ALPHA, DELTA, LAMBDA & BRAVO CMMs, allowing for integrated scanning operations.

CMS-106 Laser Scanner3D point scanning at its best

Global Performance 03.04.03, a new compact size and flexible coordinate measuring machine (CMM) from Hexagon Metrology. Industry proven ultra rigid structure, advanced motion controller and superior measuring software, ensure high reliability and high performance for the measurement operation.

The machine is ideal for both single point touching and high-speed continuous scanning of profiles and complex geometries.

Global Performance 03.04.03Compact size with high performance

Ad for APMEN magazine April 2013.indd 1 21-03-2013 15:51:00

ENQUIRY NO 103

Page 20: APMEN April 2013

Walter Develops GPS Tool SoftwareTübingen, Germany: The Walter GPS is now available in version 2.0. This update provides an introduction to machining prismatic workpieces and it is now set for use all over the world because of its multilingual capability.

“In order to provide optimum support for both solid carbide and indexable insert tools, it was necessary to redesign our proven tool selection and cutting data software,” explains Dr Peter Müller, GPS project manager at Walter AG.

“We are convinced that in this day and age, comprehensive software support for a high-performance tool is essential for achieving maximum productivity,” he adds. “We are therefore not

shying away from the immense development effort required in order to place a system in the hands of our customers that does not exist on the market yet.”

As in the past with TEC-

CCS, Walter GPS will also be developed over the years. The further expansion of the prismatic workpieces in 2013 will also be followed by rotationally symmetric components.

Delcam Thailand Holds On-Machine Verification Event

Thailand: Delcam Thailand held a two-day event promoting On-Machine Verification (OMV) to local Bangkok manufacturers on March 7 – 8, 2013. The event was hosted by machine-tool supplier Mazak in its Bangkok showroom and supported by Renishaw, which supplied probing equipment for the live demonstrations.

Representatives from many of Bangkok’s largest manufacturing companies attended on each day. Each morning included presentations on Mazak’s machine tools, Renishaw’s probing systems and Delcam’s PowerInspect inspection software. The afternoons were run in a workshop format, with delegates provided with initial training in the use of OMV.

OMV with Delcam’s PowerInspect allows initial checking of machined parts to be carried out in situ on any CNC machine tool rather than having to transfer them to coordinate measuring machines for inspection. The main advantage is that any mistakes are discovered where they can be corrected — on the machine tool. Repeated cycles of machining and inspection, interspersed with long set-up times on the respective pieces of equipment, are avoided, meaning that overall manufacturing times can be reduced.

The most obvious benefit of OMV is for those companies that do not have existing inspection capabilities. Modern machine tools either come with, or can be retrofitted with, probing systems to assist in the set-up of the job. With PowerInspect, this same equipment can be used for verification at little extra cost.

Jenoptik Wins 2013 Vision Award Jena, Germany & Brighton, US: Jenoptik’s Laser Processing Systems business unit of the Lasers & Material Processing division has received the 2013 Vision Award for the Jenoptik-Votan BIM. This machine is suited for cutting complex 3D metal parts.

The laser cutting machine was a product which, among the nominated products, had the biggest potential of solving entrepreneurial challenges using technological innovation. Main criteria for the US Vision Award are innovation, value and impact.

Your Intellectual Property

www.equipment-news.comasia pacific metalworking equipment news April 201318

Businessnews

Page 21: APMEN April 2013

www.hwacheon.com

Historian Will Durant once paraphrased Aristotle this way:

It is the Hwacheon habit.

Every day, we follow traditional, craftsmanlike methods for designing and building our very advanced machine tools. That’s what yields the best quality, longest lasting equipment. And that is what we deliver to our customers.

"We are what we repeatedly do. Excellence, then, is not an act but a habit."

We are convinced our way is the best way to build a machine tool.Entirely by Hwacheon. From castings, box guideways, spindles, gears to sheet metal.

Made by HwacheonMade in KoreaSimply Quality

We have a habit

Hwacheon Asia Pacific Pte Ltd21 Bukit Batok Crescent#08-79 WCEGA TowerSingapore 658065 +65-6515 4357 [email protected]

Visit us at

22-25 May 2013Hall A2 Booth K101

21-25 May 2013Hall 1 / 2 Booth 1365

Aerospace Mold & Die Oil & gas Automotive Pumps & Hydraulics

ENQ

UIR

Y N

O

08

7

Page 22: APMEN April 2013

Strong Demand Pushing Commercial Production Rates Higher: Boeing

Orlando, US: Boeing said that strong demand for its commercial airplanes and a healthy backlog are behind the company's decision to keep increasing production rates.

"The data tells us the market is strong and will continue to be strong. That's why we're confident as we raise our production rates," said Randy Tinseth, VP of Marketing, Boeing Commercial Airplanes. "Supply and demand will continue to be in balance as we put more airplanes into the hands of our customers."

Mr Tinseth spoke at the International Society of Transport Aircraft Trading (ISTAT) Americas conference in Orlando. He said passenger traffic is growing faster than capacity. Utilisation rates and airline load factors are at historic levels. And Mr Tinseth said airlines continue to replace their older, less fuel-efficient airplanes.

Honda Opens US$71 Million Motorcycle Production PlantPenang, Malaysia: Construction of Boon Siew Honda's one-stop motorcycle production facility, which started in the third quarter of 2011, is now completed and fully operational.

The MYR$222 million (US$71 million) one-stop production plant in Batu Kawan, Penang was officiated by Yang Berhormat Dato' Sri Mustapa bin Mohamed, minister of International Trade and Industry Malaysia on March 12, 2013.

The facility occupies a 23.7 ha site and is five times larger than the previous Mak Mandin plant in Butterworth with an annual production capacity of 300,000 units. It marks a milestone in the company's plan to consolidate manufacturing, sales, customer service, spare parts and safety riding into one integrated location for management efficiency and greater customer satisfaction.

The facility deploys an efficient production system with the use of advanced technologies such as a solar photovoltaic system, high coating efficiency technologies and an efficient electro deposition coating line for volatile organic compounds. The streamlined processes not only increase productivity but contribute to greater energy savings and reduction of manpower and material wastage.

AerospAce / AuTomoTive

Maria Herrera, Izcalli, Mexico

"All of these factors play into our decision to ramp up production in a methodical, deliberate way," he said. "We constantly pulse the market to make sure we're exactly where we need to be."

Boeing's 737 program is currently in the process of increasing its production rate to 38 airplanes per month and will go to 42 per month in the first half of 2014. The 777 program just ramped up production to a record high of 8.3 airplanes per month (100 per year) and the 787 program plans to increase its current five per month rate to 10 per month by the end of this year.

Mr Tinseth also said industry data shows the economic life of airplanes continues to hold steady. "We've done an exhaustive analysis of the data. Everything tells us that airplanes are long-lived assets and continue to be good investments."

More Newswww.equipment-news.com

@

www.equipment-news.comasia pacific metalworking equipment news April 201320

Businessnews

Page 23: APMEN April 2013

ENQUIRY NO 107

Page 24: APMEN April 2013

www.equipment-news.comasia pacific metalworking equipment news April 201322

For centuries, machines were operated solely by people. For workpiece machining this means the

workpiece quality was only ever going to be as good as the machine’s stability and reliability and the operator’s experience and ability.

Although it was a laborious task, (eg: in manual tool grinding, every angle and surface to be ground required a new clamping. For each measuring process the workpiece had to be removed from the machine, measured and then re-clamped. Errors could quickly creep in and the reject rate was high) outstanding precision could be achieved with the right person even then.

Machining Going SoftThe first step towards automation was Numeric Control (NC) machines. Their control system read the control commands present on data carriers and converted them into movement sequences. The big advantage back then was

by changing the data carrier, (still perforated tape at that time) the machines could be quickly adapted to a new task, which is why NC controls were at first primarily used in machine tools.

With advancing technological d e v e l o p m e n t , c o m p u t e r technology also found its way into the production process. CNC technology began to assert itself in the mid 70’s. It provided higher flexibility and was the enabler for rationalisation in series and single part production.

Thanks to electronic control and software tools, much more precise and complex products can be manufactured cost-effectively today. Through the use of software combined with modern measuring and drive technology, today processes can be operated with high reliability and reproducibility in quality ranges which were still inconceivable just a few years ago. This also applies for the manufacture of stepped and profile tools, for example. Pine tree cutters

Software ProgramsByte-ing Into GrindingGrinding these days is enabled by software programs as much as the grinding wheel. By Dipl Ing Ira Schroers

Modern software technology has simplify and accelerate the production process in the manufacturing of turbine blades

Today’s funnel geometries of a forging die can be produced in a single clamping in just a few minutes using modern grinding software

Thanks to electronic control and software tools, much more precise and complex products can be manufactured

and thread milling drills as well as micro tools for the medical sector can only be manufactured due to modern software.

Modern Software Programs For GrindingUsers require programs which will allow them to manufacture complex parts as cheaply and quickly as possible. At the same time the precision requirements on the workpieces are increasing. While 0.01 mm was sufficient a few years ago, today precisions of under 0.005 mm are the rule.

For comparison: a human hair is 0.07 mm thick. In order to achieve this precision, application software, hardware and machine control must harmonise with each other. This is only possible if the software developer has the relevant expertise and possesses sound knowledge of mathematics, control technology and grinding technology.

With a team of software sp e c ia l i s t s , t he so f t wa re StuderTechnology was developed in around five years. This system stores the company’s entire grinding know-how in a database and suggests the optimal setting for the machining parameters, irrespective of the operator’s knowledge.

The StuderGrind grinding software and all other software modules access this when programming a new grinding

CuttingEdgE

Page 25: APMEN April 2013

April 2013 asia pacific metalworking equipment news www.equipment-news.com 23

ENQ

UIR

Y N

O

09

0

INFO:VDW – Generalkommissariat EMO Hannover 2013Verein Deutscher Werkzeugmaschinenfabriken e.V.Corneliusstraße 4 · 60325 Frankfurt am Main · GERMANYTel. +49 69 756081-0 · Fax +49 69 [email protected] · www.emo-hannover.de

www.em

o-han

nover.d

e

APMEN_ASIA_3406_13159_EMO Hannover 2013 08.03.13 10:53 Seite 1

INFO:VDW – Generalkommissariat EMO Hannover 2013Verein Deutscher Werkzeugmaschinenfabriken e.V.Corneliusstraße 4 · 60325 Frankfurt am Main · GERMANYTel. +49 69 756081-0 · Fax +49 69 [email protected] · www.emo-hannover.de

www.em

o-han

nover.d

e

APMEN_ASIA_3406_13159_EMO Hannover 2013 08.03.13 10:53 Seite 1 Enquiry No. 3001Turn to page 80a or log on to www.equipment-news.com to enquire

process. The advantages are much shorter changeover and set-up times without rejects, and optimal production results from the outset.

It is a similar story at Walter. The ToolStudio software is available for virtual programming and machining, as well as a database of knowledge for tool grinding.

With Grips, Blohm, Ewag and Jung offer a programming aid for profiling grinding wheels and develop grinding programs which can be parameterised application-

specifically for individual workpiece families. Common to all software solutions is simple, intuitive operation and familiar Windows-based user interface. But these software solutions by no means mark the end of development.

Future Of Grinding Is Software?The importance of grinding software will increase, because in future it will be the most important distinguishing feature in

competition. Ewag, for example, is working on further standardisation of its software, Walter is focusing on profile tools and regrinding, while Studer, with Studer training and programming, is working on a program which will enable customers to execute ‘grinding dry runs’ on a laptop.

Blohm Jung is currently performing initia l tests for the automatic calibration of workpieces using a 3D scan; this will enable the machine to select the appropriate grinding program with the aid of the CAD drawing and then grind the workpiece from the drawing. But one thing is common to all developments: the more complex the software proce sse s r unn ing in t he background become, the simpler the operation of the machine.

Whether peel grinding longitudinal contours (left) or pendular grinding prismatic surfaces (right) – modern software can master all challenges

CuttingEdgE

Page 26: APMEN April 2013

www.equipment-news.comasia pacific metalworking equipment news April 201324

Instead of linking conventional grinding machines, more a n d m o r e a u to m o t i v e manufacturers and suppliers

rely on compact and cost-effective technology for their crankshaft, camshaft or gearshaft manufacturing.

O n e s u c h c o m p a n y i s Getrag Ford Transmissions, one of the largest transmission manufacturers in the world. They have three Jucenter 6L’s installed. With the units, a maximum capacity of more than 2 million gearshafts can be reached during

Enquiry No. 3002Turn to page 80a or log on to www.equipment-news.com to enquire

three-shift operations.Within the grinding machine, is

a machine concept that is said to support economical turnaround and enables significant potential savings.

Keeping Quality & Quantity UpThe trend to build transmissions offering smaller gear ratio increments to achieve better fuel efficiency, require new manufacturing machine concepts to achieve higher part accuracies while increasing the equipment’s throughput. Product quality, cycle

times, unit costs, output and process reliability must therefore always be at a constant high level. This ethos manifests itself as tangible result — what was earlier ground on three machines can now be achieved in one machine.

Throughput is matched by quality. The long-term precision of the machine is enabled by its hydrostatic guide ways and drive systems. The same systems provide dynamic stability and dampening. According to the manufacturer, the Jucenter 6L is the first grinding machine which enables complete grinding of gearshafts in a cycle time of less than 45 seconds.

With a machine availability of 97 percent, (tradit iona l manufacturing lines using three machines can only reach 91.7 percent) an annual production of 800,000 gearshafts can be produced. Reducing the number of machines also reduces labour costs — an additional benefit.

To a dd to t he ove ra l l performance in time, the Junker Operator Panel (EJOP) allows a standardised operating structure of a l l machines produced by the manufacturer. As such, familiarisation phases or retraining are reduced to a minimum.

Case Study:

With Quality & SpeedGrindingOne company has claimed that it is possible to grind gearshafts faster than ever without compromising quality. Contributed by Christine Isenmann, marketing consultant (Communication), Erwin Junker Maschinenfabrik

New manufacturing machine concepts need to achieve higher part accuracies while increasing the equipment’s throughput.

CuttingEdgE

Page 27: APMEN April 2013

INNOVATIVE BAND SAW BLADES FOR YOURREQUIREMENTS OF TODAY AND TOMORROW

Customised band saw blades and support for higher effi ciency

Made in Spangenberg, made in Germany. www.wikus.com

With more than 50 years of experience in the development and production of high-performance tools, WIKUS is Europe‘s largest manufacturer of band saw blades and global technology leader in metal sawing.Precision band saw blades from WIKUS represent innovation and productivity with the objective of higher effi ciency for the customer.

WIKUS is offering you:· Innovative band saw blades, optimised for all kinds of sawing tasks· Competent and individual customer service in the entire sawing process· Cutting tests directly on location of the customer

WIKUS-SägenfabrikWilhelm H. Kullmann GmbH & Co. KGMelsunger Str. 3034286 SpangenbergGermanyTel.: + 49 5663 500 – 0eMail: [email protected]

WIKUS_AnzAsien_09|11_rz.indd 2 19.09.12 09:54

ENQUIRY NO 178

Page 28: APMEN April 2013

www.equipment-news.comasia pacific metalworking equipment news April 201326

The automotive industry in Southeast Asia appears to be starting the year on a good footing. According

to Business Monitor International or BMI, a source of specialist news analysis, data and forecasts, Thailand is a major production hub due to its strong export potential.

This positive trend is expected to continue in 2013, with automakers increasing investments into the country to use it as an export base. Furthermore, support from the Thai government should continue to boost the industry. Vehicle sales this year are likely to grow 10.3 percent to reach 1.6 million units.

With robust demand expected over the year, automotives producers need to ensure that their facilities are ready to take on higher production volumes.

Given the large number of parts and the stringent requirements that are needed for automobile production, effective Quality Control (QC) measures need to be in place. These processes ensure that parts on the production line conform to predefined standards. They also allow parts to be tracked anywhere along the line for traceability and accountability purposes.

Challenges On The Line The last 20 to 30 years have seen major improvements being made in Otto and diesel engine technology. Modern day engines give off far less particulate matter and lower levels of carbon dioxide, while providing greater reliability in the detection of operational faults. Where a 2.5 litre combustion chamber was required to produce 180 horsepower, a 1.4 litre chamber today is all that is required.

However, in order for the same amount of power to be produced using a lower cubic capacity engine, greater compression is required, resulting in the need for improved engine lubrication. The lower engine cubic capacity results in a reduced clearance in the bearing shells of the

connecting rod eyes. This creates production challenges because it is difficult for the connecting rod to withstand the stronger forces that are exerted while operating with minimal tolerances.

In the manufacture of connecting rods, material temperatures can rise to about 1,280 deg C, which causes the C70 steel to be extremely sensitive to the mechanical shaping processes. One problem is that it is possible for the connecting rod to end up being thicker or thinner than the required size while it is being forged.

During the automated forging process, forging displacement occurs under certain conditions. It happens if the upper and lower dies do not accurately correspond within a tolerance, which could range from a tenth to hundredths of a millimetre. Even during the subsequent manual calibration process, occasional temperature

changes in the connecting rod could still cause deviations in its size and weight.

This makes Quality Control (QC) a vital part of the entire production process. The rods are first sandblasted and are visually inspected before they undergo a magnetic powder test to detect the presence of possible ultra-fine hairline cracks. Before component parts are directed to a connecting rod, the latter is checked to ensure that its weight is within tolerances of plus or minus six grams. The connecting rods are then fed via a conveyor belt into the optical testing machine. They are detected by a light barrier, where their locations and positions are then transmitted to the tracking system.

At the first image processing station, in-sight vision systems equipped with telecentric lenses are used to measure the lengths and widths of the connecting rods,

From the automotive to medtech sectors, manufacturers in Southeast Asia are looking towards better quality control methods. By Didier Lacroix, senior VP, International Sales & Services, Cognex

Machine Vision To Facilitate

Reliable Production

TechTalk

Page 29: APMEN April 2013

April 2013 asia pacific metalworking equipment news www.equipment-news.com 27

the concentricity of the crank eye, and the engraving. The lengths and widths are determined according to the product specification, based on the ratio of the centre of the crank eye, to an established outer edge reference. If measurements deviate outside the acceptable range, the vision systems transmit a signal to reject the connecting rod.

In the image processing station, a vision camera is used to detect additional characteristic numbers on the upper side of the components, by checking 3D imprints that have good Optical Character Recognition (OCR) legibility. The different characteristics are recorded under a combination of different light settings. Light Emitting Diode (LED) background lighting helps to define the contours of components. Engravings and characteristic numbers are recognised under red LED incident lighting.

Staying On TrackTraceability is another important aspect of QC. Data management on the production line allows manufacturers to optimise processes and to keep track of quality. Collecting and storing the necessary data on vehicles and related parts can also help to reduce costs. The information also comes in handy for responding promptly and accurately to possible complaints and recall problems.

To a c h i e v e a r e l i a b l e traceability program for engine and transmission parts production, manufacturers can turn to 2D Data Matrix Direct Part Marked (DPM) codes. A car transmission can comprise of about 300,000 parts. Key components may include the T/F driver gear, T/F driven gear, differential gear, carrier, O/D clutch, transmission case, housing, valve body, etc. These items need to be tracked throughout the production process.

Besides these, key components on the engine make up about 200,000 parts (eg: the piston,

cylinder head, engine block, CAM shaft, and crank shaft), and are also traced throughout the manufacturing process and distribution channels.

Every day, a particular facility’s convent iona l t ransmission manufacturing line produces approximately 1,800 units, and its engine line rolls out 1,300 to 1,400 units. The problem was that the facility’s tracking system could only deliver about 97 percent successful read rates or less. And because it was manually operated, it was difficult for the tracking system to match the manufacturing cycle on time. This in turn decreased work efficiency and production yield.

There was also the possibility that inappropriate parts may be used if the code read was incorrect, which could cause product defects later on. Since the s-speed transmission parts are typically small, the data matrix codes are also hard to read. Given such a high production rate, an increase in read rates by just two to three percent on these production lines would deliver major benefits.

Solution In SightThe solution came in the form of in-sight barcode readers that were deployed on the production lines. The readers are optimised with patented algorithms, which help users achieve read rates of 99 percent or higher, even on the toughest DPM and label-based ID applications.

Each 2D Data Matrix code is read to ensure that the data matches the corresponding part that it is marked on. Production information such as date of manufacture and model number, is then saved on the server. In adopting this solution, the facility has been able to reap benefits such as increased production yield, a reduction of manufacturing costs and improved work efficiency.

In another facility, machine vision is also used to detect product defects in the production of electro-hydraulic automatic transmission control modules. The system first reads a 2D code on the part that is being inspected. After receiving confirmation from the production management software that it is the correct part, the defect detection process commences.

The system checks for the presence of bolts; the positions and distances of contact pins of connectors; and the presence of adhesive tape. Any products that do not conform to predefined standards are removed. The system stores a total of 10 detection positions in a single job file.

A P rog ra m mable L og ic Controller (PLC) and a robot-arm are integrated into the vision system. When the robot-arm arrives at the assigned position, the vision system sends a signal through the IO module to change product detection positions. The PLC sends a trigger signal for the vision system to capture images and to give a signal after that, to

Across technology-intensive industries such as automotive and medical devices production, machine vision is playing an increasingly important role.

TechTalk

Page 30: APMEN April 2013

www.equipment-news.comasia pacific metalworking equipment news April 201328

indicate the end of that segment of inspection.

The PLC then instructs the robot-arm to move to the next position. After completing inspections at all the 10 positions, the vision system sends out signal that indicates the end of the inspection cycle. The results are displayed and sent to the production management software, along with images of any detected defects.

Surgery In ProgressIn the medical devices industry, machine vision plays an important role in the manufacture of electrosurgery electrodes. The latter are employed by neurosurgeons and plastic surgeons to cut tissue and cauterise bleeding vessels in a range of different procedures.

To ensure that the electrodes fulfil customer requirements, a number of critical dimensional measurements need to be performed. This includes gauging the diameter of the tips to ensure that they are isolinear or parabolic (depending on the specification); measuring taper angle and length, overall length, bend radius, as well as other variables.

Performing ChecksE le c t ro de s a re in sp e c te d immediately after a proprietary tapering process called electro-chemical pointing. Fixtures of tapered electrodes are cleaned and dried, before being loaded into a machine vision-based system for

inspection. The fixture of electrodes is automatically indexed into the inspection zone, where the vision camera is positioned overhead. The vision system captures an image of the needle and performs dimensional measurements in sequence.

After an electrode has been inspected, the camera moves to the next electrode and repeats t he proce ss. D imensiona l measurements of each electrode are displayed onscreen, which makes it easy for operators to compare results against specifications. The information is also stored on a database to allow quality assurance staff to collate and provide reports to the customer. This helps to save human resources as the staff do not have to perform additional inspection routines — with less accurate equipment.

A fixture of electrosurgery electrodes can be inspected in three to five minutes. When this is completed, the system unloads the fixture and the operator retrieves the parts. Any electrodes that fail to meet the grade are rejected and can be identified onscreen for disposal.

Accepted electrodes are removed, and a corresponding label for each is printed, documenting the inspections for archival purposes. The documentation can be used to highlight any production process inefficiencies and reduces the amount of time needed for quality assurance. It also helps customers to better model their

own processes and assures them about product quality, without them having to perform their own additional internal inspections.

All About QualityIn the manufacture of small implants such as screws for spinal surgery, manual inspections are becoming increasingly unsuitable. Due to tightening regulations, vision technology is called upon to provide the means of ensuring quality during production.

For low volume production, a solution can be found in using a two-axis desktop robot coupled with a vision system. To begin, each implant is placed into the cell of a blister pack. Each batch is identifiable by a code and certain nests may be empty. The products are inspected in their individual nests as they move through the vision system. The camera is located on the robot’s y-axis, and inspection takes place while the blister packs are transported under the camera in the x-axis direction.

Severa l inspect ions are made for each nest. A barcode scanner is used to enter data for each batch. Data obtained from the inspection is compared against predefined set values and permissible tolerances. In the event that a faulty product is detected, an alarm is triggered to signal QC personnel to remove the product for manual inspection.

Across technology-intensive industries such as automotive and medical devices production, machine vision is playing an increasingly important role. By adopting such solutions in QC, manufacturers can raise the bar for quality and efficiency in their production facilities. In this manner, waste is reduced and human resources can be saved — all while better meeting traceability needs and legislative requirements for product safety.

Enquiry No. 3101Turn to page 80a or log on to www.equipment-news.com to enquire

Machine vision is widely used in the automotive industry

TechTalk

Page 31: APMEN April 2013

1800 226 5886

>> Accelerate your productivity at ni.com/industrial-control-platform

.stnemurtsnI lanoitaN fo skramedart era moc.in dna ,IN ,stnemurtsnI lanoitaN ,WEIVbaL .devreser sthgir llA .stnemurtsnI lanoitaN 3102© Other product and company names listed are trademarks or trade names of their respective companies. 07926

Lowering cost, increasing productivity, and shortening design times are just some

of the challenges industrial engineers face. The graphical system design approach

combines productive software and reconfi gurable I/O (RIO) hardware to help you

meet these challenges. This off-the-shelf platform, customizable to solve any control

and monitoring application, integrates motion, vision, and I/O with a single software

development environment to build complex industrial systems faster.

NI LabVIEW system design software offers ultimate fl exibility through FPGA programming, simplifi es code reuse, and helps you program the way you think–graphically.

Unbeatable Control,Precision, and Flexibility

National Instruments ASEANni.com n [email protected]

Singapore 1800 226 5886 Philippines 1800 1888 3834 Other ASEAN CountriesMalaysia 1800 88 7710 Vietnam 1800 585 837 (65) 6226 5886Thailand 1800 345 555 Indonesia (62) 21 2924 191 ENQUIRY NO 106

Page 32: APMEN April 2013

www.equipment-news.comasia pacific metalworking equipment news April 201330

Machine vision systems are prevalent across industries to perform i m a g i n g - b a s e d

automated inspections using high speed cameras, sensors and image processing software today. They are commonly used for quality assurance in process control to detect defects, monitor production lines, or track, sort and identify parts. Machine vision systems are also used for high speed visual test inspections that are indeterminable by human eyes such as crash tests in the automotive industry.

According to a market report by IMS Research, Asia is poised to be the largest market for machine vision by 2016. Market complexity, rising labour and other costs are driving industries to adopt machine vision in order to keep manufacturing costs down and stay competitive. There is little wonder why machine vision companies continue to invest

heavily in R&D to help industries improve their productivity.

Bridging The GapMatching image processing with camera speeds is an inherent problem for high-speed automated visual inspections, and researchers around the world have devoted their time and effort to identify a solution. Advanced algorithms and excellent program structures were two such examples, but these solutions failed to consider the limitations of the hardware computational capability.

In traditional cases, the Central Processing Unit (CPU) is more than sufficient to process and analyse acquired images from the camera concurrently. However, with the advent of high-speed image acquisition cameras going over 1,000 frames per second, there is a widening gap to improve the rate of image processing to reduce system latency.

L o w l a t e n c y b e t w e e n acquisit ion and the image processing result is of paramount importance as it impacts the overall speed of the machine vision system. It is now essential to start looking into the hardware components.

Field Programming Gate Array (FPGA) technology fills in the missing gap as it frees the CPU to perform its inherent operations by taking over all or partial of the image processing and analysis tasks. Technology companies and R&D institutes have already been evaluating the use of FPGA in vision systems.

What Is Field Programming Gate Array (FPGA)?FPGAs are reprogrammable silicon chips invented by Ross Freeman, the cofounder of Xilinx in 1985. Fundamentally, these semiconductor devices contain a large quantity of non-interconnected gates ( logic devices) whose functions are determined by a wiring list which is then downloaded to the FPGA.

The wiring list determines how the gates can be interconnected, and this interconnection is performed dynamically by turning semiconductor switches on or off to enable different connections.

Imagine a printed circuit board with a large number of devices that are not connected. The wiring list determines which nodes are to be connected and this can be done using physical wires soldered to the pins or a wire wrapping tool to connect the devices. However, if the wiring is embedded in the printed circuit board, it cannot be programmed.

Software is used to program a FPGA to define and verify the logic functions as well as the expected timing of the signals in the device. A layout tool physically maps the logic devices to specific elements on the chip and thereafter determines their actual wiring.

Incorporating FPGA Technology In

Machine Vision

A graphical programming environment is said to be the key that paves the way for the utilisation of FPGA image processing in vision systems. By Wu Rong, marketing engineer, National Instruments

TechTalk

Page 33: APMEN April 2013

Nothing compares to Equator™

- one gauge, many applications

To see Equator in action call +65 6897 5466 or scan the code

The unique new Equator™ is a versatile alternative to

traditional gauging, offering inspection of an unprecedented

variety of manufactured parts. It has been developed and

proven on the shop-floor with industry-leading gauging users

in multiple industries and applications.

Nothing compares like Equator™

Benefits which can be gained by using Equator™ include:

• Reduced gauging costs

• Robust shop floor measurement process

• Reduced production bottlenecks

Singapore T +65 6897 5466 F +65 6897 5467 E [email protected]

Thailand T +66 2 746 9811 F +66 2 746 9816 E [email protected]

Malaysia T +60 3 5631 4420 F +60 3 5631 5407 E [email protected]

Indonesia T +62 21 2550 2467 F +62 21 2550 2555 E [email protected]

ENQUIRY NO 108

Page 34: APMEN April 2013

www.equipment-news.comasia pacific metalworking equipment news April 201332

Figure 1: Image processing is done in FPGA, freeing up CPU resources in the process

Camera

Actuator

FPGA

Image Acquisition Device Host

CPU

Memory

Memory

LabVIEW FPGAInline Processing

Acquisition Logic

Digital I/O

Why Use FPGA Image Processing For Vision Systems?F P G A t e c h n o l o g y i s a n attractive proposition because yo u c a n up da te mu l t ip le hardware functions in the field. Microprocessors have a fixed hardware structure to execute the software whereas FPGA possesses a flexible hardware structure. Programming a FPGA rewires the chip itself so each independent processing task is assigned to a dedicated section of the chip, and can function autonomously.

For this reason, FPGAs are highly efficient when it comes to performing repetitive instructions required for DSP or imaging tasks. FPGAs also permit the design of large number of parallel data paths, which can greatly increase the performance for DSP and data streaming applications.

The parallel nature of FPGAs makes them appealing for vision because many image processing routines can be broken up into independent, iterative tasks. Consider an operation where each pixel is multiplied by a value. With the resources on an FPGA, many pixels can be multiplied simultaneously, increasing the processing throughput.

This parallel nature to vision is also the reason why multi-core processors have become so impor ta nt for machine vision. Many image processing a lgor ithms a re inherent ly parallel and therefore suitable for FPGA implementations. These

algorithms involve operations on pixels, lines, and region of interest do not need high-level image information, such as patterns or objects in the image. These functions can be performed on small regions of bits as well as on multiple regions of an image simultaneously.

The fast loop rate of FPGA also enables fast processing of image data. The FPGA receives image data and processes individual bits using a high-speed onboard clock (up to 100 MHz clock rate), as compared to normal loop rate of 1 KHz in a Windows system.

One other benefit of using FPGA is the tight integration of processing and hardware input/output (I/O). In most machine vision systems, a decision will be made based on the result of image processing and a corresponding action will be taken. If a product fails the vision inspection, it will be rejected and removed from the production line. FPGA integrates tightly with the hardware I/O, and a command can be sent to the actuator immediately within the same clock cycle.

When To Use FPGA In Image Processing?FPG A v ision technolog y is commonly used for high-speed control applications such as high-speed alignment where objects need to stay within g iven parameters or high -speed sorting production lines where objects need to be sorted efficiently and quickly based on colour, shape, size, texture or other physical features.

FPGA image processing can speed up this process with higher quality assurance because it reduces the computational resources required for image analysis. FPGA frees the CPU to perform other operations because it is a hardware resource. CPU intervention is not required to perform the analysis, so latency is significantly reduced from preprocessed input to processed output.

Figure 1 shows an example of how the FPGA is used to offload resources from the CPU. In this case, the FPGA performs the entire image processing, which results in minimum system latency. Image

Field Programming Gate Array (FPGA) explained

X1153

TechTalk

Page 35: APMEN April 2013

April 2013 asia pacific metalworking equipment news www.equipment-news.com 33

ENQ

UIR

Y N

O

09

4

information to the CPU can be sent for data storage or image display after processing is completed.

FPGA can also be used with a vision system’s processor to perform image pre-processing. Figure 2 shows how to preprocess with an FPGA while the CPU performs the more advanced processing algorithms.

In this case, the FPGA performs bit-level processing such as filtering or edge detection. The preprocessed image is then sent to the CPU for image-level processing such as pattern recognition. System latency is still low in this case because the CPU has fewer functions to perform than it does in a traditional vision system.

Examples of image processing functions that work well on FPGA are listed below:

Preprocessing • Image transforms• Image operators• Shading correction• Bayer decoding• Colour space conversion• 1D and 2D fast Fourier Transform• Filtering (smooth/sharpen)• Binary morphology Feature Extraction• Edges, lines, and corners• Binary objects• Colour

Measurements• Centroid• Area measurements

FPGA ProgrammingIn the past, the roadblock with FPGA technolog y was that engineers need to have a deep understanding of the digital hardware design in order to master low-level FPGA design tools like VHDL to design the algorithms running on the FPGA chip. This is a challenge for vision engineers who do not have in-depth knowledge of machine-level implementation.

Figure 2: Imaging acquisition and preprocessing are done in FPGA. CPU performs more complicated image analysis

Camera

FPGA

Image Acquisition Device Host

CPU

Memory

Memory

LabVIEW FPGAInline Processing

Acquisition Logic

TechTalk

Page 36: APMEN April 2013

www.equipment-news.comasia pacific metalworking equipment news April 201334

The emergence of graphical High-Level Synthesis (HLS) design tools such as NI LabView has removed some of the major obstacles of the traditional Hardware Description Languages (HDL) design process.

The NI LabView graphical programming environment is suitable for FPGA programming because it represents parallelism and data flow, so users who are both exper ienced and inexperienced in traditional FPGA design processes can leverage on FPGA technology.

FPGA vision technology can be found in many areas, including medical, R&D and manufacturing industries.

Medical IndustryOne of the most exciting examples of using FPGA technology in the medical industry is to boost the speed and efficiency of Optical Coherence Tomography (OCT). OCT is a technique for obtaining sub-surface images of translucent or opaque materials at a resolution equivalent to a low-power microscope.

OCT images reflections from within tissue to provide cross-sectional images for further analysis. The OCT technique i s a l r e a d y g a r n e r i n g i t s own following in the medical community because it provides tissue morphology imagery at much higher resolution (better than 10 µm) compared with other imaging modalities like MRI or ultrasound.

A typical OCT system uses a linescan camera and special light source to sweep across a tissue and image the surface beneath, one line at a time. Once each line is acquired, the data is scaled and converted to the frequency domain, where the data is further manipulated and combined with other lines to reveal a high resolution, 3D picture of a tissue. Figure 3 shows a 3D OCT medical imaging system.

Manufacturing IndustryFor industrial inspection, there are many applications today that use brute force to check for defects over large surface areas. An alternative is to adopt vision systems.

An example of a vision system is available from Basler. It is used to inspect sheets of glass for flaws. The system first corrects for lighting variations across the glass, then thresholds the image to extract any particles on the sheets. After that, it analyses the particles to determine the type and severity of the defects.

In order to keep up with production, the system uses nine linescan cameras to feed images to nine individual computers. Trying to program, synchronise and coordinate one inspection over nine computers is a challenge that could simply be avoided by connecting all nine cameras to nine FPGA-enabled plug-in boards inside one computer or PXI chassis.

Research & DevelopmentIn the R&D field, flexible, upgradable and easily maintainable vision systems are highly sought after by many research groups.

Department of Physics from National University of Singapore has developed a data acquisition and imaging system for nuclear microscopy based on NI FPGA technology. This system supports several imaging methods to simultaneously acquire image signals and perform pulse height analysis from a variety of ion beam detectors (Figure 4).

ConclusionDeploying FPGA technology for machine vision systems has numerous advantages. It enables high-speed image processing and its parallel nature allows image processing routines to run simultaneously.

Pre-image processing can be done in FPGA to save the CPU resources for other routines and reduce processing time. FPGA can also integrate seamlessly with physical I/Os making it suitable for vision control systems.

New or inexperienced FPGA users can also use a graphical programming platform to leverage on the intrinsic advantages of FPGA technology to build a complete machine vision system that parallels imaging processing with camera speed and resolve the predicament faced by many industries today.

Enquiry No. 3102Turn to page 80a or log on to www.equipment-news.com to enquire

Figure 3: This 3D OCT medical imaging system is the world’s first and is developed by the Graduate School of Medical Science, Kitasato University, Japan.

Figure 4: NI grid captured using three different imaging methods

TechTalk

Page 37: APMEN April 2013

Add: 10/F,GIFC,No.1438 Hongqiao Road,Shanghai 201103 ChinaTel:021- 2208 5112

[email protected] NO 056

Page 38: APMEN April 2013

www.equipment-news.comasia pacific metalworking equipment news April 201336

An automatic camera-based weld seam inspection can provide advantages to companies that use

automated welding. In contrast to a manual, subjective visual inspection by trained employees, an automatic, optical inspection system always works objectively based on individual criteria.

Over at the BMW Group’s plant in Dingolfing, Germany, where the 5 Series saloon are produced, welded seams are inspected in the same production cell immediately after MAG (Metal Active Gas) welding is completed. This is necessary in order to inspect key seams which could be hidden during subsequent production processes and as a result, would no longer be accessible for inspection.

A handling robot is used to inspect the component; this saves on robotics and the need for a separate cell. The system inspects MAG weld seams on the rear part of the steel body in two different stations. All relevant parameters such as the inspection process, warning limits and inspection

Enquiry No. 3103Turn to page 80a or log on to www.equipment-news.com to enquire

criteria are defined according to the customer’s production requirements at the very start of production.

• Inspection At Station 1The main chassis beam on the rear part consists of 12 welded seams, each 20 to 30 mm long, with six on the right and six on the left. Inspection takes place according to the BMW Group’s specifications for welded seam length, seam surface, seam position, throat thickness, holes, undercuts and pores. To achieve this, a robot moves the main chassis beam along a stationary sensor so that all welded seams can be inspected. The inspection takes 34 s.

Feature of inspection station 1: Virowsi, a weld seam inspection system, inspects two parallel MAG welded seams which are positioned very close to one another. This represents quite a challenge for the welded seam inspection software, because there is generally weld-free sheet metal to the left and right of the

seam and the system must locate the edges of the welded seam (seam expansion) easily. Software processes make it possible for even welded seams which are close together to be inspected clearly and reliably.

• Inspection At Station 2At a second station, the weld seam inspection system inspects eight welded seams along with the main chassis beam, (each with a welded seam length of 30 mm) the seam surface, seam position, throat thickness, holes, undercuts and pores. The inspection here takes 16 s.

Inspection Results & Follow-Up ActionsThe computer unit processes the weld seam images using evaluation software and depicts the inspection results visually on a customer terminal outside the production cell.

Information on the size and position of the defects is recorded and can be used later for tracing and process opt imisat ion. Defining individual warning l imits, for example, a l lows drifting production processes and fluctuations in the product quality to be corrected quickly.

All data generated is entered into a database and forms the basis for interactive statistics. Defect hot spots can be localised within the process using a defect frequency chart. This forms the basis for the systematic optimisation of product quality.

After inspection, the robot control receives a signal telling it whether the inspection part is to remain in the production process or if it is to be redirected to a separate production cell for reworking. There, a trained employee determines whether and how an inspection part is to be reworked.

Optical 3D Inspection Of

Weld Seam Case Study:

Weld seam inspection systems are used to ensure that the required quality standards for welded seams are met in an automobile factory. By Dipl Ing Markus Maurer, product manager 3D Technology, Vitronic

TechTalk

Page 39: APMEN April 2013

Optical Gaging (S) Pte Ltd21 Tannery Road, Singapore 347733Tel: 65 6741 8880 • Fax: 65 6741 8998E-mail: [email protected]: www.smartscope.com.sg

Singapore • Malaysia • Indonesia • India • Hong KongSouth China Thailand • Philippines • Vietnam • TaiwanAustralia • New Zealand • Middle East

ENQUIRY NO 086

ShapeGrabber SG Central Software lets users easily configure scan settings, speed and resolution for ShapeGrabber 3D laser scanners.

Quality control operators who use a ShapeGrabber automated 3D scanner perform an inspection simply by placing the part on the scanner turntable and clicking “Run”. The ShapeGrabber scanner automatically scans and rotates the part according to the scan specifications (for example, the density of the scan and the amount of rotation required). The scan can be conducted using default specifications or can be easily customized by the using a user-friendly interface.

This generates a “point cloud”—an exact representation of the entire surface area of the scanned part. This point cloud data file is easily imported into the inspection software included with the ShapeGrabber system (Geomagic® Qualify). This data can be quickly compared to a reference file, such as a CAD model or the scan of a known good part, or measurements can be extracted directly from the scan data.

An inspection report is then automatically generated—with visual and numerical data—and can be saved or printed. The report quantifies the deviation of the part’s actual shape from the specifications, using GD&T analysis, error maps, tabular measurement, cross-sectional analysis, and more.

Optical Gaging (S) Pte Ltd (OGS) offers OGP / QVI non-contact and multisensor metrology systems like OGP SmartScope, QVI SNAP & contour projectors.

Over the years, OGS has expanded its metrology solutions with new products such as SHAKE SHR 3D CT (X-Ray) Scanner for non-destructive inspection & measurement and Vici Vision Optical Measuring system for shaft & cylindrical parts inspection.

COMPLEX SHAPESare our specialty

Page 40: APMEN April 2013

www.equipment-news.comasia pacific metalworking equipment news April 201338

CNC motion planning includes the ability to smooth the path within machine tolerances, and

optimise velocity and acceleration based on the physical limits of the axes. Therefore, to improve cycle times and the quality of a part’s surface finish, a motion system must possess three components: smooth tool paths; good control of velocity, acceleration, and jerk; and a robust control loop to handle real-time disturbances and changing loads.

In this field, Hurco has claimed to have developed a software program that of fers a new approach to motion planning. The software system determines the optimal trajectory and feed

rate to run the tool, which results in reducing cycle time.

According to the company, the UltiMotion motion control system can simultaneously reduce cycle time by up to 30 percent or more and improve surface finish quality.

In addition, the motion control system can produce cornering velocity that is 2.5 times faster than conventional motion, 50 percent less machine jerk, and a patented dynamic variable look-ahead mechanism that does not require a fixed number of blocks.

Instead, the control evaluates the geometry and motion profile and adjusts the look-ahead information to make optimised maneuvers. This look-ahead mechanism is another reason why better surface finish quality can be obtained in a shorter period of time.

The entire system took six years to develop and consists of multiple components, including motion planning with double-arc data smoothing, dynamic model compensation with feedback control, and machine geometry compensation.

Variable-Length Dynamic Look-Ahead Part of UltiMotion’s optimisation is the Variable-Length Dynamic Look-Ahead system, which looks ahead to plan deceleration and acceleration along an optimised trajectory based on measured characteristics of the machine (dynamics of the axes). The motion control technolog y generates optimal trajectories to achieve the best performance out of the CNC mill.

The dynamic look-ahead system does not require a fixed number of blocks like its conventional

Reducing cycle time and improving surface finishing is now a software program’s job. By Maggie Smith, media relations manager, Hurco Companies

Going ‘Soft’ On

Machining

Figure 1

Software &MeaSureMent

Page 41: APMEN April 2013

April 2013 asia pacific metalworking equipment news www.equipment-news.com 39

Enquiry No. 3202Turn to page 80a or log on to www.equipment-news.com to enquire

Enquiry No. 3201Turn to page 80a or log on to www.equipment-news.com to enquire

counterpart. Instead, the motion control system changes how far ahead it looks depending on the feed rate and lengths of the blocks (complexity of the part), up to 10,000 blocks. This is the main reason why the decrease in cycle time is dependent upon the complexity of the part and the number of repetitive tasks, such as drilling and tapping. The more complex the part is or the more repetitive tasks required, a greater reduction in cycle time will be achieved.

Double-Arc Data SmoothingAnother feature that enables the motion control to improve surface finish is double -arc data smoothing. Tangential arcs replace lines, resulting in smoother motion, and the system uses gradual arc curvature to reduce vibration, which also increases the quality of the surface finish. Ultimately, the motion control software is able to adjust data points within tolerance to compensate for NC round off errors.

This technology also expands the performance range of an existing feature patented by the company called SelectSurface Finish Quality (SFQ). With SFQ, users choose either a higher throughput or better surface finish for their application via a simple one-parameter control mechanism. The Hurco control automatically adjusts all of the

internal parameters to achieve the desired result. The UltiMotion system extends the performance range for SFQ to achieve even better surface finish quality for the finish pass and saves more time in the roughing or semi-roughing passes.

The Control LoopThe control loop component of the software includes feed forward

and feedback. Feed forward is the predicted output gains to the axes’ servo drives to follow the tool path, and is the primary output of the control system. Feedback is made possible by the axes’ encoders that measure actual position and velocity. The feedback control makes small adjustments to servo gains to compensate for real-world conditions. (Figure 1)

Rapid CorneringFor programs with numerous consecutive rapid moves, the motion control system does not stop between two rapids. Instead, it travels through blended corners at very high speeds with only a negligible deviation. This saves a significant amount of time for repeated tasks, such as drilling and tapping.

Case Studies:3D Solutions Shawn Yates at 3D Solutions in Connecticut, US, realised a 30 percent reduction

in cycle time on a job for turbine blades that are approximately 18 inches long by 4

inches wide. The blades are cut from aluminium and took 2 hours and 20 minutes

with conventional motion.

With no adjustments to the program, the job took 1 hour and 40 minutes when

UltiMotion was enabled. Along with the reduction in cycle time, Mr Yates reported a

40 percent increase in throughput, which means he is cutting 1.4 parts for every one

he was making before he activated the system, and he also said the surface finish

is better (Figure 2).

Figure 2

To improve cycle times and the quality of a part’s surface finish, a motion system must possess three components: smooth tool paths; good control of velocity, acceleration, and jerk; and a robust control loop to handle real-time disturbances and changing loads.

Software&MeaSureMent

Page 42: APMEN April 2013

www.equipment-news.comasia pacific metalworking equipment news April 201340

Enquiry No. 3203Turn to page 80a or log on to www.equipment-news.com to enquire

Enquiry No. 3204Turn to page 80a or log on to www.equipment-news.com to enquire

Established in 1985, Wepco Plastics

specialises in short-run prototype injection

moulds in aluminium and steel. In the fall of

2008, Wally and David Parmelee (Wepco

owners) found themselves at a cross road

in terms of milling capacity for their tool

room. Should they continue with their

current milling technology or invest in the

future by purchasing a higher performance

machine? They knew this decision would

impact their tooling and in-house moulding

business for many years. New technology

can promote growth, but it can also be a

risk since there is always a learning curve.

The decis ion to move forward

and invest in new technology proved

advantageous for the company. The dual-

wound 12,000 rpm spindle of the Hurco

VMX30, coupled with a motion control

system called UltiMotion, reduced total

part cycle time by as much as 200 to 300

percent in some cases with no loss of

accuracy or finish.

UltiMotion endured intensive beta tests

before the feature was introduced to

customers. M-Tech Lab in Indianapolis,

US was one such beta site. President

and M-Tech founder Tom Miller said he

seeks speed versus accuracy for the type

of machining his company does. “We

are builders of custom orthotics and we

focus on throughput and speed. With the

software, we’re seeing 30 to 35 percent

faster throughput,” said Mr Miller.

The majority of the orthotics the

M-Tech Lab

Wepco Plastics

The majority of the orthotics M-Tech manufactures are custom designed to a person’s foot

Another noticeable benefit M-Tech has experienced is the lack of machine jerk

Wepco primarily focuses on aluminium moulds for prototype and short-run batches

company manufactures are custom

designed to a person’s foot, but all of them

are elliptical in shape and have contours

throughout. UltiMotion handles such

complex geometry because the spindle

can cut fast in a smooth elliptical motion.

The secret to the software program

is the advanced trajectory algorithm

that generates significantly faster yet

smoother motion than conventional

motions systems that rely on hardware.

Controlling motion with software versus

hardware is theoretically a simple idea,

but development of the software was a

complex and comprehensive project.

Another noticeable benefit M-Tech

has experienced is the lack of machine

jerk. “With UltiMotion, our machine

runs very fast and we don’t get any

jerks,” observed Mr Miller. In the long

run, smooth motion reduces stress on

the ball screw and minimises the wear

and tear on the machining centre’s

components.

According to Mr Parmelee, he thinks

the productivity will get better, “We have

really started to focus on pushing the

machines to see what they can really do.

With the software, along with tweaking

our post to make segmented or linear

moves, we are achieving high feed rates

up to 800 ipm.

As an example, we had a cut that

would have been at least 100 hours long on

our old machines that we did in 30 hours,

and I believe that we could even cut that

in half. We finish cut the cores with a .0469

end mill and ground back .500 at 100 ipm.

We could have easily doubled the speed

and achieved the same results, and I don’t

have to polish the mould.”

These product iv i t y ga ins y ie ld

increased profit margins for existing

jobs and additional capacity due to

increased throughput. For example, a

30 percent productivity gain turns a 40

hour work week into at 52 hour week in

terms of throughput, with zero overtime

for labour and zero increase in debt

service on the equipment.

Wepco Plastics

M-Tech Lab

Software&MeaSureMent

Page 43: APMEN April 2013

TAKE THE LEAD in fast, flexible fiber laser processing with Electra FL

LVD leads the way to a greater choice in laser processing technology with the fiber laser system, Electra FL. With its high-speed, thin sheet processing, low operating cost and the ability to process a wide range of ferrous and non-ferrous materials, Electra FL will lead you to flexible, efficient, economical processing.

Learn more about the compact, modern design, speed and easy operation of Electra FL by visiting www.lvdgroup.com/electra/en.

Take the Lead with LVD

LASER • PUNCH • BEND • INTEGRATE • www.lvdgroup.com

P.T. LVD Center: +62 216120771/email: [email protected] LVD Malaysia SDN. BHD: +60 355695861/email: [email protected]

Visit us at MTT2013 booth B101 22 – 25 May 2013

ENQUIRY NO 098

Page 44: APMEN April 2013

www.equipment-news.comasia pacific metalworking equipment news April 201342

CNC machining is favoured for its ability to automate large batch processing while maintaining the precision of parts. Yet, it faces the challenge of thermal errors, whose effects could compromise machining accuracy. By Sherlyne Yong

Computer Numerica l Control (CNC ) ha s become ubiquitous in machining ever since

computing technology took flight. A program that uses a series of code and symbols to send instructions to the machines has progressed to become an essential component of modern manufacturing systems, and is especially vital for automated processes.

The rise of CNC systems in machining is not without just cause. It provides a bevy of benefits that include greater convenience and efficiency, as well as a reduced reliance on labour. This would inevitably result in cost savings for operators. Nonetheless, its main advantage can be said to be the autonomy it accords to the machining process.

It allows for batch processing, where as much as 1,000 parts can be machined continuously. Compared to traditional systems that are heavily reliant on the expertise and skills of operators, CNC machines have greatly reduced the amount of resources consumed in each machining job.

However, no system is without its challenges. In the case of CNC systems, this comes in the form of errors that stem from geometrical inaccuracies or thermal effects. In this instance, the autonomy of such systems serves as a double-edged sword, as the lack of human supervision has also made it easier to miss such errors when it happens.

Meanwhile, there is a growing need for high precision machining, which is fast becoming a priority as manufacturing moves towards the production of complex and sophisticated parts.

It is therefore important that manufacturers are able to meet close tolerances and keep product quality consistent. Accounting for errors through design or compensation will bring them closer to this goal.

Types Of ErrorsErrors in CNC machining are either dynamic or quasi-static. The former describes errors that are dependent on the operating conditions of each machine, and could be caused by structural

vibration, spindle error motion and controller errors.

Quasi-static errors on the other hand, refer to errors which may appear in the machine, fixturing, tooling and workpiece at a more gradual pace. This includes geometric, kinematic and thermal errors, in addition to those induced by cutting forces.

Faults in individual machine components are known as geometric errors, while kinematic errors are caused by misaligned components.

Thermal errors occur when heat sources in the machine tool cause thermo - e la st ic deformations at various contact points. Together, geometric and thermal errors make up the bulk of machining inaccuracy problems. This stands particularly true for thermal errors, which cannot be eradicated completely as the generation of heat during machining is unavoidable.

Temperature changes may lead to thermal expansion or the thermal bending of machine elements, which are mainly a result of temperature variances in spindles, ball screws, as well as coolants, which can cause machine structure distortion.

Other thermal error sources include heat that is generated from the cutt ing process, machine energy loss, the job shop’s environment, people, as well as thermal memory from the previous environment. Meanwhile, positioning accuracy is particularly affected by temperature variances in ball screws.

A Heated Issue The prevalence of thermal errors is partly due to the sheer number of triggers, but is further exacerbated with the introduction of complicated machine tools. For instance, it is much harder to quantify and predict thermal deformations in five-axis machines as opposed to its three-axis counterparts.

PrecisionUnder Heat

Software&MeaSureMent

Page 45: APMEN April 2013

April 2013 asia pacific metalworking equipment news www.equipment-news.com 43

In addition, temperature is highly variable and changes according to the working cycle, environment, and even along different parts of the machine tool. This effectively makes it much harder to resolve when compared to other types of errors, which is made more complicated with the inclusion of five-axis machines and their rotary axes.

The algorithms used for three axis models cannot be applied as they only consider tool positions, and not tool orientations. The interactions between five axis and three axis machines differ as well. This has made it a challenge to develop efficient calibration methods, and is a roadblock towards the development of robust and accurate prediction models.

N o n e t h e l e s s , t h e r m a l formations, and machining errors in general, can be minimised in

two ways — either through error avoidance or error compensation. The former aims to minimise machining inaccuracies by using the design of machines and tools to account for errors during the design and planning stage, or by optimising working conditions to eliminate error sources.

However, error avoidance has its limitations; it is virtually impossible to create a machine that effectively prevents all types of errors. It is a complicated process that involves too many parameters. Constantly optimising the infrastructure of a machine or the work environment can also be a costly matter. Doing so, or attempting to do so, might also incur huge costs, especially if the machine has to be constantly updated and recalibrated to be in line with tolerances that are growing increasingly tighter.

In contrast to the avoidance

method, which aims to prevent errors from surfacing, error compensation fully recognises the fact that there are errors, before it measures and counteracts it instead.

Most times, compensation rather than avoidance is preferred as the changes required in machine design or operating environment may be difficult to achieve. For the same reasons, thermal error compensation is easier to implement and also more cost effective.

Compensating For PrecisionCompensat ion is typica l ly performed through the use of algorithms, which utilises a holistic rather than individual approach when assessing for errors. Instead of reducing the scale of errors, it focuses on reducing the overall impact that these errors have on precision and the finished part.

ENQ

UIR

Y N

O

00

7

ADVANCED

MEDICAL

STARTER

WHICHEVER SWISS ST 26 YOU CHOOSE:

YOU ALWAYS CHOOSE SWISS MADE QUALITY

AUTOMOTIVE - MEDICAL - ELECTRONICS - MICROMECHANICS

Tornos Swiss ST 26 for turned parts up to 25,4 mm. Amazingly affordable Swiss Made quality. Now it pays to invest in high performance and productivity with the new Swiss ST 26. Two totally independent tool systems provide balanced operations, 7 linear axes, 2 C-axes and conversion to a guide-bush-less machine in only 30 minutes. The Swiss ST 26 is equipped with the most powerful and dynamic spindle and counter spindle ever built for this class of machine, allowing extreme machining capabilities. Choose from three turnkey equipment packs: “Starter”, “Advanced” and “Medical”.

Your nearest representation: TORNOS Malaysia, Penang, +6(04)-642 6562/6563TORNOS Thailand, Bangkok, +66 2746 8840-1 www.tornos.com, www.swiss-st.com

Software&MeaSureMent

Page 46: APMEN April 2013

www.equipment-news.comasia pacific metalworking equipment news April 201344

Error prediction can either be conducted offline or online. In the offline approach, the error is first measured before or after a machining process, and then used to recalibrate the instructions for subsequent processes.

The perks of using this method are that it is less time consuming and does not require a sophisticated control. However, the machining process has to be highly repeatable in order for the calibration to be accurate.

Online compensation on the other hand, does not assume that the process is repeatable. Instead, errors are monitored continuously during machining, and the feedback is utilised simultaneously to alter the process.

This allows for inaccuracies to be corrected almost instantly. With the ability to respond in dynamic situations, this method provides greater accuracy and is also suitable for boosting the precision of lower grade machine tools. The main drawback of this method are the convergence speed of neural networks and the approach’s need for copious amounts of sensors and a large database for ‘training’ the networks.

Predictive Of SuccessThe foundation of every good compensation model is accurate measurement. Modern CNC systems generally have closed feedback loops, where key information is first collected for error modelling, before it is analysed and then used to predict and circumvent errors.

This has set the stage for adaptive controls that are able to react to real time information.

Quality of data would determine the efficacy of compensation, for the processing information will be modified based on those inputs and go on to influence the amount of compensation applied. It is therefore pertinent that the measurements attained are accurate and indicative of the machine tools’ thermal statuses.

As such, thermal sensors have to be placed at strategic locations where dominant thermal modes can be captured. This is an instance where quality trumps quantity. Using more sensors than necessary is not only costly, but it also creates noise in error modelling.

In fact, it has been suggested that sensor placements play a much bigger role. According to researchers at the University of Michigan, sensor locations play a vital role in determining the robustness of a thermal error model, thereby affecting its applicability under different working conditions.

Due to the variability and

unpredictability of thermal effects, computational techniques are used to highlight relationships and trends within the collected data. These computational systems include back propagation networks, ar t i f icia l neura l networks, regression analysis, and system identification. Correlation can also be calculated using finite element analysis, which is recommended for prediction without conducting experiments.

However, error estimation using these systems may be time consuming due to the large amounts of data involved. In response to this, researchers and engineers are on the lookout for methods that helps to trim down computing time.

Some have managed to shorten the time taken by grouping sensors together, or by utilising small neural networks. In another case, machining accuracy was achieved even though limited data was used for thermal error compensation.

With precision and tolerance requirements looking set to become only more stringent in future years, it is vital that machine tools are able to withstand and compensate for errors that affect accuracy.

While much has been done to negate the effects of thermal errors, there is no online or offline system that can deliver all benefits in one package. Instead, the search for a balance between efficacy, timeliness and costs continues.

Enquiry No. 3205Turn to page 80a or log on to www.equipment-news.com to enquire

Errors in CNC machining are either dynamic or quasi-static

Modern CNC systems are generally able to react to real time information

Software&MeaSureMent

Page 47: APMEN April 2013

ENQUIRY NO 097

Page 48: APMEN April 2013

www.equipment-news.comasia pacific metalworking equipment news April 201346

Eco - fr iendly machine tools are increasingly the more favoured choices as energy costs escalate

worldwide. In addition, users are looking to protect their profit margins and move toward reducing their environmental footprint and becoming more socially responsible in their manufacturing practices.

This trend is also seen in sheet metal fabrication, where progress has been made in improving the energy efficiency of the bending process and of press brake machinery.

In the past few years, the technology of servo electrically driven press brakes has come to the forefront with several new product introductions designed for bending small parts on a compact machine.

Also in the spotlight of late are servo electric press brakes in larger formats. These machines are being promoted as consuming less power and as a ‘greener’, more environmentally friendly method of producing bent parts.

The ‘Idling’ IssueWhile electric ram designs are gaining popularity, it is important to note that modern day hydraulic press brakes are not as ‘power hungry’ as some users may believe. In fact, hydraulic press brakes can rate comparably to electric ram machines when it comes to energy consumption.

When considering the overall equation of energy cost, the link to direct part cost and environmental impact, it is important to take into account the reality of most

bending shops. The fact is, the majority of press brakes in any given workshop stand at ‘idle’ 75 percent of the available time; some even more than that. While the causes of this inefficiency are varied, the need to consider technology that can reduce a machine’s energy consumption when at idle is key.

Statistically, hydraulically driven press brakes comprise 95 percent of the world market of press brakes because they provide the most flexibility, repeatability and durability in a cost-effective design. So what can be done to improve energy consumption of hydraulic press brakes?

Most importantly, if the machine is at idle and the motor remains on then the machine will continue to consume power. Most modern machines have a motor shut off that automatically turns the motor off after a period of time. However, the motor requires a period of time to start up again, which can disrupt production.

Ma ny ma nufacturers o f hydraulic press brakes are now incorporating several different technologies to reduce the power consumption of hydraulic press brakes, particularly when the machine is at ‘idle’. These technologies include:

1. Frequency convertors for the motor pump

2. Variable flow pumps

•FrequencyconvertorsFrequency convertor units are used to ‘slow’ the motor revolution to zero when the machine is at ‘idle’. They also intelligently control the motor’s revolutions in synchronisation to the machine’s different operat ing mode s, which include approach, bending, decompression and idle.

S imi la r to ‘stop - sta r t ’ technology in the automotive

PPEC series hydraulic press brake with frequency convertor

Energy Reduction In Bending

Reducing energy consumption during ‘idle’ time and studying actual power consumption figures can lead to energy-efficient bending. By Matthew Fowles, group marketing manager of LVD

FORMJOinCut

Page 49: APMEN April 2013

ENQUIRY NO 102

Page 50: APMEN April 2013

www.equipment-news.comasia pacific metalworking equipment news April 201348

Enquiry No. 3301Turn to page 80a or log on to www.equipment-news.com to enquire

industry, using frequency convertors means the machine is ready for bending as soon as the operator presses the bending pedal.

The advantage of this system is two-fold: energy reduction is dramatic — up to 45 percent energy reduction compared to convention models — and the machine is ‘ready-to-go’ at the touch of the pedal.

•VariableflowpumpsVariable flow pumps enable the machine’s controller to regulate the flow of the oil in the hydraulic system. By lowering the flow of oil to a minimum when the machine is at idle, the energy consumption of the motor is dramatically reduced with power savings of up to 45 percent, depending upon working modes.

Electric Servo Driven Press BrakesSelecting the right machine for the application is also a significant consideration when it comes to controlling and optimising direct part cost.

For example, the application

of bending small piece part components — an application that can benefit from the use of an electrical servo driven ram press brake. Often, users employ larger/more costly machines than are required for the bending of such parts. A machine that has a lower price tag, a small footprint, is transportable with a fork lift and offers fast bending speeds and low power consumption is the ideal solution for this application.

T he te c h nolog y o f t he electrical servo driven ram makes the practicality of creating such a machine feasible. It is important to remember that it is not purely the fact that the ram drive is electrically driven and consumes less power that makes this technology a good solution for small part bending. It is that the technology allows a more compact machine to be built with a fast ram drive characteristic.

In actua l ity, the power consumption figures for a smaller size modern hydraulic press brake (ie: 35 ton – 1.5 m) using frequency convertors or a variable flow pump are quite comparable to an electrical servo driven ram system. However, beyond the size

of machine, the motor size required for an electrical servo ram machine to deliver the required bending speeds becomes impractical considering the inertia/motor load ratio. The point is, electric servo driven ram systems should be used for what they are best at, and not simply employed because they are perceived to be ‘green’ and ‘eco’ friendly. Actual power consumption figures tell the story.

ConclusionWhen it comes to selecting your next press brake, do not be swayed by the ‘green’/’eco’ hype; consider the facts. Most press brakes sold in the world are hydraulic because they offer the best mix of flexibility, durability and competitive pricing.

Consider electrical servo driven machines for the bending of small parts. But when it comes to the most flexibility, productivity and cost effective bending of medium to large parts, hydraulic press brakes equipped with the latest frequency conversion or variable flow pump technology remain the best price-performance solution.

Frequency convertors allow the machine to be ready for bending as soon as the operator presses the bending pedal

The energy consumption chart shows the difference in energy consumption between a PPEC series hydraulic press brake (main picture of the article) and a conventional machine.

Variable flow pumps enable the machine’s controller to regulate the flow of the oil in the hydraulic system

FORMJOinCut

Page 51: APMEN April 2013

+66 (0) 2642-6911

ENQUIRY NO 072

Page 52: APMEN April 2013

www.equipment-news.comasia pacific metalworking equipment news April 201350

Material removal is the basis of metal cutting. Material addition on the other hand, is

the chief mechanism behind the slightly newer concept coined as AM or additive manufacturing. Lying conveniently between the two would be metal forming where there is no net gain or loss to a work piece’s mass.

In the world of metal forming, plastic deformation is the key or main enabler. Although the term ‘permanently deformed’ often has an ominous ring to it, particularly to someone involved in manufacturing or QC, plastic deformation in this case has helped produced many useful parts.

Asia Pacific Metalworking Equipment News (APMEN) caught up with technical experts in the metal forming world to talk about the present and the future of metal forming. By Joson Ng

Pressing On

FormJoinCut

Page 53: APMEN April 2013

April 2013 asia pacific metalworking equipment news www.equipment-news.com 51

ENQ

UIR

Y N

O

08

9

Like their counterparts in the metal cutting or material addition world, metal forming has evolved over the years in order to keep up with an ever demanding manufacturing world. According to Steve Lin, the chairman of the metal forming machinery committee of Taiwan Association of Machinery Industry (TAMI), he sees all electric technology as a key technological trend in metal forming.

He said: “All-electric systems are now widely used in various processing equipment, including presses and forming machines.”

L o ok ing at t he rate o f development and integration of servo motors and controllers in for m ing te ch nolog y in recent times, this statement only serves to emphasise how servomechanism, along with combination philosophy (eg: punch/laser 2-in-1 machine) have come to dominate developments in metal forming in recent years.

Developments In Press MachinesIn the recently concluded TIMTOS show, Seyi demonstrated how low energy consumption is possible in press machines. For example, the numerically controlled die cushion featured in the SD1-300 is said to enable low energy consumption but higher production.

According to the manufacturer, servo motors double up as generators during die cushion compression to recapture energy that is normally wasted, making the machine more energy efficient.

Kuei-Chang Hsu, assistant manager of the R&D department of Seyi added that apart from being energy efficient, presses integrated with servo technology can also improve productivity. He claimed that in the case of SD1-160, it can achieve an increase of productivity by up to 100 percent.

Looking forward, Mr Hsu felt that the softer aspect of pressing

would eventually come to the fore. He said: “A user-friendly interface is important as workers cannot operate a complex interface. In addition, powerful programmability is important.”

Elsewhere, Chin Fong, also a Taiwanese press manufacturer, is a keen adopter of servo technology. According to them, the advantages of servo press

are better production efficiency as it is possible to select and adopt optimal slide motion curve according to various production requirements.

In addition, product stability and precision is improved along with an extension of die life due to low noise and low vibration. Finally, an intelligent feature can be found on their presses.

19 A Hillview Avenue#01-06 Hillview ParkSINGAPORE 669554

phone +65 8112 6550mail [email protected] www.heimatec.com

FormJoinCut

Page 54: APMEN April 2013

www.equipment-news.comasia pacific metalworking equipment news April 201352

Their machines are capable of automatically correcting Bottom Dead Centre (BDC) position, retaining BDC repeatability within +/- 0.01 mm. It is important as BDC position can be affected by temperature.

Combining ProcessesMoving from Taiwanese machine builders to a Singapore research institute, APMEN caught up with Dr Sebastian Berner, a scientist working on forming technology at Singapore Institute of Manufacturing Technology (SIMTech) to find out more on the field of metal forming.

Much l ike t he machine builders, Dr Berner’s project also involves combining two metal forming processes, in this case stamping and forming.

“We have one project related to combined stamping and forging. We combine stamping, forging and forming processes to take advantage of various processes in order to manufacture more complex product shapes,” he said.

This process is said to tap into the advantages of both stamping (low forming load and good tool life) and forging process (good dimensional accuracy and variable wall thicknesses). Applicable to gears, electronic components and biomedical instruments, this technology can potentially improve productivity and reduce material

Other Notable Forming Research At SIMTech Advanced Spin Forming Technology

Spin forming is a metal forming process,

which involves one or two rollers moving

in the axial or radial direction and

simultaneously deforming the peripheral

of the axisymmetrical workpiece to

the desired shape. Because of its

deformation characteristics, spin

forming can be used to form ‘hard to

form’ or low ductility materials. With the

technology, it is possible to manufacture

peripheral intricate features such as

flange, boss and wheel rim profiles.

waste (near net shape forming). This project, along with several

others has helped some of the SMEs of Singapore, according to Dr Berner, as his team is able to help setup the production sequence for new products in their client’s facility. In some cases, they have allowed their clients to manufacture parts in-house that were previously bought from abroad.

“It’s a cost issue. We made the tool development and process of the whole forming sequence taking into account what machines they have in their machine shop. For one specific product, we achieved 30 percent reduction in cost,” said Dr Berner, summing up his work with Singapore SMEs.

Improvements In Metal FormingAw a y f r o m h i s r e s e a r c h projects, APMEN understands from Dr Berner that in-process measurement in metal forming processes l ike bending is something that can benefit the sheet metalworking industry.

Giving an example, he said: “In press brakes, checking of bending angles can be done with optical measurement systems.” He also touched on the importance of servo technology citing its advantages.

“Servo technology allows the maximum capacity to increase. Its (servo technology) advantages are its different stroke and load curves

that can be applied and used for demands that have a shearing process, which has a different demand on the stroke load curve compared to a drawing process,” he said.

Future TrendsIn the Singapore manufacturing context, Dr Berner sees a low volume high mix trend, giving rise to the need for modular tools. He said: “The tools need to be very flexible due to the number of different components to be manufactured. You have quite often part family, eg: different product line with little difference in cross section shape. One of the focus is to develop tools that are applicable for all this components just by varying the tool setting.”

In conclusion, Dr Berner highlighted another trend which could potentially be adopted by machine builders. “Another future trend might be to combine additional process sequences like welding in forming machines. There are some researches going on in Germany where efforts are being made to combine joining technology with stamping technology,” he said.

Enquiry No. 3302Turn to page 80a or log on to www.equipment-news.com to enquire

Dr Berner sees a low volume high mix trend giving rise to the need for modular tools in metal forming

Kuei-Chang Hsu

FormJoinCut

Page 55: APMEN April 2013

ENQUIRY NO 209

Page 56: APMEN April 2013

www.equipment-news.comasia pacific metalworking equipment news April 201354

Carbon Fibre-Reinforced Plastics (CFRPs or simply carbon) have been used for the manufacturing

of cars for several years now. As the ultra-light and extremely rigid material is much more expensive than steel or aluminium, it is rarely used in mass manufacturing processes. This will potentially change, especially when Schuler, a metalforming solutions provider, now claims that it is offering lines which can economically produce CFRP parts in large volumes.

According to the company, the manufacturing of carbon parts is carried out by the RTM (Resin Transfer Moulding) process in which woven carbon fibre mats are placed in a die, filled with resin and hardened by applying heat and pressure. This apparently results in shorter cycle times and improves consistency.

“High-pressure RTM presses not only enable shorter cycle times for complex parts with high requirements regarding geometry and rigidity, but also deliver consistently high part and surface quality,” says product manager Raimund Zirn. This virtually eliminates so-called voids, ie: resin-free vacuum pores or gaps within the part or along its edges.

In the high-pressure RTM process, resin is injected as quickly and smoothly as possible into the vacuum mould, which opening is just a few tenths of a millimetre. This gap injection process enables the

Enquiry No. 3303Turn to page 80a or log on to www.equipment-news.com to enquire

resin to spread over the mat with far less flow resistance and therefore with low injection pressure. It then quickly infiltrates the mat before polymerisation is started by heat induction.

The Curing Process “The vacuumising, fast resin injection, high resin pressures and tempered dies mean that the gelling process virtually begins with the wetting of the last fibre,” explains Mr Zirn.

Curing takes four to eight minutes — the thicker the part, the longer, as the reaction heat cannot be led as easily into the die. Depending on the part, the necessary resin pressures also vary between 30 and 150 bar. Large-surface exterior panels with clamping areas of 3,600 x 2,400 mm require total press forces of 36,000 kN or more.

Due to the geometry of the part or cavity surface, the die’s centre of loading is not necessarily in the middle of the press. There are also off-centre forces from the injection positions.

“The parallelism control prevents the slide or upper die from tilting during gap injection and therefore ensures smooth and even injection over the entire surface,” he explains. With a positioning speed of 1 mm/s, the presses achieve parallelism values of 0.05 mm in absolute terms with diagonal clamping surfaces of 4 m.

The preform and part handling

processes, as well as the necessary die cleaning, account for a considerable part of the RTM cycle lasting two to three minutes.

“This largely involves the removal of plastic residues, which mainly stick to the polymer seal located in the lower die,” adds Mr Zirn. On request, however, the manufacturer can fit the RTM presses with two shuttle moving bolsters so that a common upper die can be operated with two alternating and movable lower dies. This reduces downtime to the period it takes to replace the lower dies.

Upstroke Short-Stroke Presses RTM presses are available in two designs: conventional downstroke machines work with a fixed bed and moving bolster, and a slide whose press force is transmitted via cylinders in the press crown. Parallelism is ensured by four servo-controlled counter pressure cylinders located at the bed corners. These are also responsible for the breakout force needed to counter the adhesive forces and open the die.

In the upstroke short-stroke press, the slide only acts as support during the pressing process. From top dead centre, the slide is moved by a drive cylinder to its support position and locked there. The actual working stroke is performed by the bed plate, driven by several short-stroke cylinders. Parallelism is ensured by the servo controlling of these cylinders. The breakout force in upstroke presses is achieved by the withdrawal of the bed plate.

“The benefits of the upstroke short-stroke press compared to downstroke designs are the high closing speeds of 1,000 mm/s, the shorter pressure build-up times of under 0.3 s and the significantly lower construction height,” says Mr Zirn.

PressingIssue

Manufacturing CFRP parts by forming is now a more desirable process. By Simon Scherrenbacher, Corporate Communications, Schuler

Of CFRPs

The

FormJoinCut

Page 57: APMEN April 2013

Organized by:Supported by:

A part of:

Empower your production ef ciency with automation and assembly technologies. Engage in market connectivity. Enhance business pro tability. Reserve your exhibit space now! Sales Team tel. +66 2686 7299,e-mail: [email protected] Or scan this code to visit the show’s website.

InterMold Thailand intermoldexpo

Supports ASEAN as a Manufacturing Hub The One and Only Show for Automotive Parts Manufacturing 4 Specialized Trade Exhibitions for Parts Makers

www.intermoldthailand.com

20-23 June 2013

BITEC, BangkokThailand

23

Thailand’s Largest Show for Mold & Die Manufacturing

Auxiliary Equipment

Processing Machinery

Mold & Die Materials & Components

Tools & Tooling

Measuring & Testing

“Special privileges for a group of 3+ overseas visitors!

For more details, please email us at

[email protected]

ENQUIRY NO 096

Page 58: APMEN April 2013

www.equipment-news.comasia pacific metalworking equipment news April 201356

Tubes are the order of the day. Normally supplied in six-metre lengths, tubing is available in a variety

of material qualities, thicknesses and sizes. They are usually round, but square, rectangular and oval cross-sections are often seen. Tubes and profiles are used everywhere, from gym equipment to furniture and on to agricultural machinery. They are also used for simpler structures as well.

The Future Lies In

TubingD e m a n d i s c u r r e n t l y

outstripping available capacity. There were only a few suppliers using lasers for tube cutting in the past. For those early adopters of laser technology in tube cutting, they have been rewarded by great success.

Cost-Effective & FlexibleLaser tube cutting is a market with a great and diverse future. Sources say that actively marketing the

new design options available can significantly step up demand for laser-cut tubes and profiles.

Many newcomers to laser processing for tubes expand to two-shift operations within a short time. They often invest in a second laser tube cutting machine in just a couple of years to fill a largely unoccupied market niche while cashing in on attractive profit margins.

After all, tube cutting opens up new tube design options that are not practical or simply too expensive with conventional processes. In addition, this technology simplifies production work further down the line. Simpler welding equipment and jigs can be used, while costs for the welding operation itself are reduced. Positioning aids with tabs and slots simplify subsequent mounting while encoding prevents assembly errors.

The high quality of the cut edges virtually does away with rework and reduces both the number of process steps and time-consuming tool changes when compared with other technologies.

Users can cut expenditures for downstream work such as deburring and assembly. The number of intermediate steps — storage and handling are two examples — can also be kept to a minimum. This saves an enormous amount of time and greatly

Trumpf

Trumpf

Many success stories have shown that cutting tubes with lasers offer wider perspectives, both for steel dealers and for job shops that until now have been involved in 2D laser cutting. By Evelyn Konrad, Trumpf

In our example, laser tube cutting saves 49 percent in terms of time and 31 percent in part costs.

Conventional welding using two separate parts (A).

Laser-ready design with folded connections and additional positioning aids (B).

IndustryFocus

Page 59: APMEN April 2013

April 2013 asia pacific metalworking equipment news www.equipment-news.com 57

Enquiry No. 3401Turn to page 80a or log on to www.equipment-news.com to enquire

reduces parts costs in comparison to conventional processes like sawing, drilling and milling.

Keeping Unproductive Time To MinimumLaser tube cutting machine with automatic machine adjustment are said to have the ability to minimise unproductive time. Cutting tubes and profiles of up to 250 mm in diameter, with walls up to eight millimeters thick, the TruLaser Tube 7000 is one example. In addition, it has stepped rollers that provide both support and lateral guidance for the tubes to automatically adjust to the diameter of the workpiece.

The self-centring clamping jaws also adapt automatically to the tube’s geometry. A FocusLine regulation mechanism keeps the laser’s focal position constant, adjusting it automatically to

suit the type of material being processed and its thickness. The machine’s software activates the laser parameters as necessary, depending on which tube is being processed.

All these features combine to turn out parts at consistently high quality. According to the manufacturer, they have also added an unloading station to the machine. Depending on the requirements involved, it can sort finished components and place them on movable conveyor tables, in pallet cages, or in other containers.

The LoadMaster Tube unit automates production. Its tube storage magazine will hold up to four tons of raw materials, which the unit feeds into the machine for processing after carrying out a plausibility test. When doing this, the machine’s software compares

the geometry of the tubes to be processed with data already in storage. This is how the software prevents disruptions caused by operating errors.

T h e u n i t ’ s g r i p p e r s automatica lly adapt to the measured length of the tube. The operator can, of course, still feed individual tubes manually or semi-automatically with a pivoting conveyor.

Appearing with the TruLaser Tube 7000 is a swivel-mounted laser cutting head. This permits accurate chamfering, which is a prerequisite for obtaining a close fit between surfaces to be welded. Diagonal cutting at angles of up to 45 degrees opens up more manufacturing options — not only in mild steel but also in stainless steel and aluminium applications.

ENQ

UIR

Y N

O

09

9

IndustryFocus

Page 60: APMEN April 2013

www.equipment-news.comasia pacific metalworking equipment news April 201358

Ma nu fa c t u r i n g i n S i n g a p o r e a n d other Southe a st Asian countries is

at the crossroads. Singapore in particular is facing the perennial problem of high cost, coupled with mounting social pressures to curb the reliance on foreign workforce. Many larger companies have decided to relocate and enjoy the lower operating cost offered by many developing countries.

The rest who are still here have a decision to make. Relocating could arguably help reduce operating cost, but whether it is feasible to move again once the cost goes up in their adopted nation is another issue to ponder. For those who decided to stay or for some reasons are unable to relocate, embracing automation

ToFabricateAutomate

When considering automation solutions for sheet metalworking, looking at the big picture helps in better decision making. By Joson Ng

and pursuing higher productivity are their only other viable options.

Automation In Sheet MetalworkingTrumpf Asia Pacific recently organised an Automation and Productivity Seminar in Singapore to help educate participants on the advantages of automating their operations as well as to highlight the importance of time studies and calculating part cost. Two speakers flew in from Germany to explain how automation can be beneficial in the sheet metalworking context.

“Our target is to make our customers more competitive,” sa id Marc Sauer, who is in charge of Trumpf’s sales and advising consultant of sheet metal handling systems. With

that in mind, he went on to share with the participants the automation solutions on offer. The automation technologies can be applied in three areas; they are punching/combination machines, laser machines and bending machines.

In the three areas, they serve functions like: automatic loading and unloading; automatic sorting of large and small parts; and storage connection.

The SheetMaster, arguably the company’s flagship automation solution, is an automatic loading and unloading equipment that ensures raw material supply to the machine is seamless and finished parts are unloaded carefully onto the pedestal. According to the manufacturer, it can help produce medium to large batches in a cost-effective manner and it is also easy to upgrade and expand the automation system.

Why Automate?High cost and difficulties in implementation are often the perceived notion of automation to the uninitiated. Michael Sellner, also from Trumpf’s sheet metal handling systems, spent about an hour explaining why automation can be a feasible solution against escalating labour and operating costs in Singapore.

In his presentation, he quoted common problems customers faced prior to installing an automation system. They are low percent machine running time (actual machining time), high number of operators and high traffic on the shop floor.

A f te r i mple me nt i n g a n automation system, loading and unloading are improved, leading to higher productivity. Some operators are also freed to concentrate on other tasks and automation also results in space saved and better material flow.

Enquiry No. 3402Turn to page 80a or log on to www.equipment-news.com to enquire

Technical Seminar:

IndustryFocus

Page 61: APMEN April 2013

ENQUIRY NO 014

Page 62: APMEN April 2013

www.equipment-news.comasia pacific metalworking equipment news April 201360

For Taiwanese machine tool industry on a whole, 2012 was a slow year. Looking back, many were talking

about uncertainties in Europe and the US being the major reasons for the downturn. In Asia, there was also a lull in China’s GDP growth which was also a major factor considering the country, along with Hong Kong, is responsible for some 33.8 percent of Taiwan’s machine tool export.

Fast forward to the present, the mood in Taiwan or TIMTOS (a machine tool show in Taipei) in particular, is far more bullish.

Hsiu-Tsang Hsu, chairman of TAMI said at the opening ceremony of TIMTOS that with a strong export business, he predicts a good year for Taiwan’s machinery industry. He said: “We are still optimistic when we look at this year (2013). With PMI level for global procurement managers all above 50, the Taiwanese machine tool industry should have room for growth of 5 to 10 percent in 2013.”

The air of optimism was echoed by Alan Lu, chairman of the machine tool committee of TAMI. He said at a press conference that although the association is “conservative”,

Enquiry No. 3501Turn to page 80a or log on to www.equipment-news.com to enquire

they are “positive” about the global market in 2013. “In the European market, we expect to see growth in Germany, the Netherlands, the UK and Turkey. We also expect a five to eight percent increase in Brazil, South Korea, Japan and India, a 10 to 15 percent increase in Russia, Thailand, Indonesia, Singapore and Vietnam,” he added.

More R&D To ComeAt the opening ceremony of the show, president of Taiwan, Ma Ying-Jeou said Taiwan do not have many natural resources and as such, have to depend on innovation and the main way to go about it is by embracing R&D. This point was

brought up again when he talked about the ways for the machine tool industry of Taiwan to improve. Apart from building up SMEs and signing various FTAs to facilitate trade, R&D is another key point.

The top management of TAMI is also singing the same tune, affirming the commitment towards innovation. Described as a “long and tough road” by Mr Hsu, he said the “R&D road” taken by Taiwanese builders was made in small but solid steps in pursuit of precision, speed and sophistication.

Mr Lu also weighed in on the R&D issue. He said it is important to develop high-end products like multi-tasking machines and five-axis machining centres. In order to compete in the global market, they need to present products with their distinctive characteristics and also satisfy the needs of customisation. In addition, he also highlighted the importance of developing solution-based technologies.

Enquiry No. 3502Turn to page 80a or log on to www.equipment-news.com to enquire

Export figures released by TAMI shown that in relation to Southeast Asia, export in

2012 (January to December) rose in Thailand, Indonesia and Singapore by 50.2, 19.0

and 11.4 percent respectively. The increase in Thailand could be due to the rebuilding

efforts after the flood which plagued the country in 2011. Malaysia and Vietnam on

the other hand registered a -2.3 and -19.9 percent increase respectively in export.

Other pertinent figures revealed a major acceptance of Taiwanese products in

the US with a 50.6 percent increase (IMTS show possibly a factor). Elsewhere, India

experienced an increase of -17.8 percent and China (inclusive of Hong Kong) posted

an increase of -3.4 percent.

By their own admission, 2012 was not a very good year for Taiwan’s machine tool industry. The year 2013 however, is a very different story. By Joson Ng

TAMIOptimistic About 2013

Trend SpottingHere are some notable export figures…

Hsiu-Tsang HsuAlan Lu

Features

Page 63: APMEN April 2013

April 2013 asia pacific metalworking equipment news www.equipment-news.com 61

TIMTOS 2013

The Taipei International Machine Tool Show or TIMTOS as it is known in the industry recently held its 24th edition in the Nangang and TWTC exhibition centres in Taipei, Taiwan. With the exhibition space of 100,000 sq m (gross), the 2013 edition is said to be the largest according to the organiser TAMI, the Taiwan Association of Machinery Industry. APMEN takes you on a quick tour of TIMTOS. By Joson Ng

Seeing Double?YCM exhibited a dual spindle machining centre (DV30T) that features two individual tool changers on either side of the machine. The machine is said to save space and improves productivity. It is suitable for the electronic market.

The More The MerrierVictor Taichung’s special offering at TIMTOS is the VTurn Q200, a twin spindle lathe with three turrets. The manufacturer insists that the machine can bring about better efficiency in high volume production. The R&D and modification processes of the nine-axis machine took the company about a year to complete.

A Giant ‘Smart Phone’ That Makes The CutWith the control interface inspired by smart phones, the MT-310i by Ecoca is a machine tool that resembles a giant smart phone. Operators can also go online with this machine.

The folks from FFG showed us the inside of the machine to convince us that it is indeed a machine tool!

Mazak showing what their products are capable of manufacturing.

Features

Page 64: APMEN April 2013

www.equipment-news.comasia pacific metalworking equipment news April 201362

Honoured At TIMTOSChmer left the Taiwan machine tool industry awards as one of the big winners when it bagged the ‘other NC machine tools’ grand champion award and the ‘award of eminence’ for the machining centre category for the Q4025L and HM5042L respectively.

The Need For SpeedAccuracy and speed are the ethos of Akira Seiki according to the company’s chairman, Alan Kludjian. It is therefore hardly surprising when the company exhibited the RMV 500 APC, a drilling and tapping machine that is touted to have the fastest movement in the world. According to the manufacturer, its maximum rapid rate is 96 m/min and the maximum acceleration is 1.6 to 2 G.

Versatility Is The WayLooking to cement their place as one of the top sheet metal machine tool manufacturer of Taiwan, Tailift has embraced fibre laser and also launched a punch laser combination machine at TIMTOS. The ML2500F is said to be able to fulfill four functions in one machine.

Grinding Out ResultsThe LGA-2812 continuous generating gear grinding machine comes with an eight-axis close loop servo control system and a direct drive motor to make sure all axes move simultaneously and accurately. Its workpiece spindle can operate up to 600 rpm and the grinding wheel can reach up to 5,000 rpm resulting in gear production efficiency, according to the manufacturer.

Features

Page 65: APMEN April 2013

April 2013 asia pacific metalworking equipment news www.equipment-news.com 63

Heritage & EvolutionWith help from certain exhibitors, the organisers were able to show visitors how far the Taiwanese machine tool industry has come.

Information On The GoThe organiser made sure tech savvy visitors were not left out by providing them booth, product and company information while on the move.

Standing OutA company that tends to stand out, Keyarrow used their own product (telescopic covers) as building material for their booth. A notable technology on the telescopic cover at the show was the Complex Synchronised Parallel Mechanism or CSPM where it is said to be more durable and less noisy.

Heavy MetalShieh Yih Machinery Industry or Seyi brought to TIMTOS the

SD1 and SD2 series of straight side direct drive servo press. Touted to provide high torque, rigidity, productivity and

formability, the machines have tonnage capacities from 80 to as high as 500 tonf.

Enquiry No. 3503Turn to page 80a or log on to www.equipment-news.com to enquire

Features

Page 66: APMEN April 2013

www.equipment-news.comasia pacific metalworking equipment news April 201364

DMG/Mori Seiki At TIMTOS

Enquiry No. 3505Turn to page 80a or log on to www.equipment-news.com to enquire

At the recently concluded TIMTOS, APMEN spoke to Woody Wang, MD of DMG/ Mor i S e ik i

(Taiwan) and asked him what the main technological innovations brought to the show were and his take on the Taiwanese machine tool industry.

Looking at the year 2013, he said: “People are generally a little pessimistic. But we are optimistic because our product range is wide, covering various sectors like the automotive, medical and aerospace industries.”

Although a wide product range is favourable, the quality of individual machines is also important. Recognising this point, he said: “The Taiwanese market demands high precision, efficiency and productivity.” With that in

mind, he singled out two machines from his booth. The machines were LaserTec40 and NVD1500 DCG HSC.

Micky Tan, product manager (new technologies) of Sauer explained further: “For LaserTec, we have incorporated a picosecond laser into the system. The benefit of this laser compared to nanosecond laser, which is common, is the beam spot size, which can be as small as 10 micron. The next benefit is the surface finish it can deliver. Because of its accuracy, picosecond laser can be used not only for ablation, but as a cutting medium as well.”

APMEN understands the NVD1500 DCG HSC is a small machine used for the mould and die industry to produce small and high precision parts. This is a suitable machine for Taiwan where the manufacture of 3C components

is in demand due to the consumer electronics industry there.

The NVD1500 DCG HSC has achieved space savings with a machine width of 850 mm. That limited space is packed with various features for high precision, including Mori Seiki’s DCG (Driven at the Center of Gravity).

The machine comes with a high speed spindle with 24,000 rpm or optional 40,000 rpm and achieves maximum acceleration rates of 0.8 G (X- and Y-axis) and 1 G (Z-axis).

Woody Wang

Asia Pacific Metalworking Equipment News spoke with Fei Chen, who is in charge of overseas

business development of Yih Troun Enterprise at TIMTOS to talk about the new launches at the show.

The word ‘modular’ comes to mind when viewing the products on show. Adopting and expanding the inserts philosophy (whereby a replaceable cutting tip is used and changed while reusing the tool body) to chamfering and T-slot cutter, Ms Chen told APMEN that their products have done well abroad.

Enterprise At TIMTOSYih Troun

“Chamfer King is one of our products that has done well in sales in Japan and in Europe. The chamfer tool is traditionally a single piece tool. Now, it has an insert as cutting edge. This results in an increase in tool life,” she said.

She revealed the product took about a year to develop and it is available in various cutting range from 4 to 110 mm in diameter. Another pertinent feature is the tool’s ability to balance out vibration during chamfering. This is due to the design and the placement of various carbide tips along the tool surface.

Another product she talked about was the T-Slot UFO cutter. It is a range of indexable T-slot milling cutter, slitting saw and side milling cutter.

According to Ms Chen, there is no fear of run out error while using such indexable tools because of the self centring taper design that connects the cutting tool to the shank. The T-slot cutter is said to be available from thickness of 0.5 mm. Finally, the manufacturer claims that the cutter can help increase machine speed by some 300 to 500 percent.

Enquiry No. 3504Turn to page 80a or log on to www.equipment-news.com to enquire

The indexable type design optimises machining efficiency

Adopting a changeable cutting tip improves tool life

Features

Page 67: APMEN April 2013

April 2013 asia pacific metalworking equipment news www.equipment-news.com 65

Facing strong competition from its neighbours who can offer potential foreign investors lower

operating cost, Singapore has seen manufacturing steadily exiting the country in recent years. Bucking the trend however is the aerospace industry, which has seen major foreign investments arriving to prevent a possible vacuum.

In fact, the aerospace industry of Singapore can be seen as one of the remaining manufacturing ‘crown jewels’ the country can boast about and by the looks of things, the government of Singapore is pulling out all the stops in order for things to stay the same.

Vision & InvestmentHighlighting its importance at the

o p e n i n g ceremony of

AeroSpace eXchange (ASX) 2013, Lee Yi Shyan,

senior minister of State, Ministry of Trade and Industry and Ministry of National Development said that the Singapore aerospace industry has contributed significantly to the country’s economy. In 2012, the sector achieved a total output of S$8.7 billion (US$7 billion) — more than doubled the output a decade ago. He added that since 1990, the industry has grown at a Compounded Annual Growth Rate (CAGR) of over 10 percent.

Revealing the government’s plans for the industry, he said: “Our vision is for Singapore to be an aerospace hub with a comprehensive ra nge of capabilities. To help us achieve this, we are developing the Seletar Aerospace Park to meet the growing and diverse needs of the aerospace industry.”

Attracting massive investments in infrastructure is just one of the strategies in place to ensure the aerospace industry of Singapore do not follow the other manufacturing

industries out of the country. Highlighting

the importance of productivity is next.

Better & FasterIn terms of productivity, Mr Lee gave two examples how local companies have embraced and profited from being productive. He said: “ST Aerospace has completed more than 400 Kaizen programs to date, generating more than S$20 million worth of savings for the company. Singapore Aero Engine Services, a joint venture between Rolls-Royce and SIAEC, reduced its engine overhaul turn-around time by 25 percent through its investment in automation. The company now boasts one of the fastest turn-around times in the global Rolls-Royce MRO network. Looking ahead, productivity and innovation must continue to be key drivers of our growth.”

With that said, he reminded those in the aerospace industry that a S$2 bil l ion National Productivity Fund has been set aside by the government to help industries make the switch to higher productivity.

Finally, a fter stating the government’s intent and vision, he laid down his marker for AAIS,

Arguably one of the more competitive industries for Singapore, the aerospace industry needs to do more to maintain their lead in the region. By Joson Ng

Alexander Wallnöfer, Bolzano, Italy

Is Vital For Singapore’s Aerospace Industry

Productivity

EvEnts&Exhibitions

Page 68: APMEN April 2013

www.equipment-news.comasia pacific metalworking equipment news April 201366

A total of four conference tracks were

put together by the organiser. They are

AeroSuppliers, Aviation Security, Civil &

AeroDefence MRO and Next Generation

Aviation Professional.

O v e r a t t h e A e r o S u p p l i e r s

conference, Frédérique Mutel, president

& CEO of JEC Group, talked about the

growing influence of composite materials

in the aerospace industry.

She said the composite market is

growing at five percent annually and is

expected to double in the next 15 years

with Asia leading the way in both value

and volume.

Conference Report

Frédérique Mutel expects the composite market to double in the next 15 years with Asia leading the way.

Enquiry No. 3603Turn to page 80a or log on to www.equipment-news.com to enquire

Enquiry No. 3601Turn to page 80a or log on to www.equipment-news.com to enquire

the Association Of Aerospace Industries (Singapore) to help draw up a blueprint for its members to transform itself in the next 10 years, making full use of all the productivity programs and funding available for the industry.

Enquiry No. 3602Turn to page 80a or log on to www.equipment-news.com to enquire

Maintaining Competitiveness Is Key: AAIS

Lee Yi Shyan

An interesting note according to her is

that the composite market is linked to the

development level of a particular industry. For

aerospace, she shared composite materials

were only used in the secondary structures

30 years ago. Now, they are getting more

popular in the primary structures.

Stating that composite use is growing

in both military and civil aviation, she said:

“Composite in aeronautics will continue to

substitute metal, especially aluminium and

planes will structurally evolve in the next 20

years using higher share of composites.”

Finally, she expressed high hopes for

Asia by predicting the emergence of the

continent in the long term as worldwide

co-leader for composite manufacturing for

aerospace with Singapore, Malaysia and

China all enjoying good growth.

Product Innovation

Teo Wee Kin, integration manager at the

Manufacturing Technology Centre of Rolls-

Royce Singapore gave some examples of

product innovation in aircraft manufacturing.

One of them is the shape memory alloy for

adaptive control of hot engine components.

Product innovative can be directly attributed

to the company’s investment in R&D, which

reached £919 million (US$1,394 million) in

2012, according to Mr Teo. He also revealed

some 475 patent applications in 2012.

Other notable endeavours in the area

of product innovation came from SIMTech.

Dr Sun Zheng, senior industry development

manager of the organisation told participants

they will develop Additive Manufacturing

(AM) capabilities in the aerospace industry

with projects expected to be launched in

February 2014.

In his welcome address at the ASX 2013

opening ceremony, Char les Chong,

president of AAIS said the organisation

sees a lot of potential for upgrading the

aerospace value chain in Singapore.

Commenting on the upgrading issue, he

said: “This serves not only to maintain our

competitiveness on a global scale, but

also to enable us to be able to better serve

the local industry, and even overseas

aerospace sectors as well.”

He also felt that Singapore is already

a “very comprehensive MRO hub,” and

ASEAN as a whole, has the potential to be “the aerospace value chain hub of

the world.” This vision requires considerable amount of commitment and as far

as the organisation is concerned, they are not about to look inwards while many

other hubs are sprouting in the region.

In conclusion, Mr Chong said: “While Singapore has its own strengths,

the region has its own too, and opportunities to synergise our capabilities are

aplenty.”

Mr Chong views Singapore as a very comprehensive MRO hub.

EvEnts&Exhibitions

Page 69: APMEN April 2013

April 2013 asia pacific metalworking equipment news www.equipment-news.com 67

Enquiry No. 3604Turn to page 80a or log on to www.equipment-news.com to enquire

AAIS organised the AeroSpace eXchange

(ASX) 2013 Conference & Exhibition at

Singapore Expo Hall 6 from February

27 to March 1, 2013. The show featured

a showground of more than 7,000 sq ft

(650 sq m), showcasing 61 exhibitors.

These included aerospace certification

bodies, design and manufacturing houses,

equipment manufacturers, metrology

companies, non-destructive testing houses,

precision machining companies, stockists

and distributors.

Memorandums Of Understanding

During the opening ceremony, three

Memorandums of Understanding (MOUs)

between the AAIS and the following

organisations were signed:

1. BSI Group Singapore

This MOU wil l see both par t ies

Event Review: ASX 2013

ENQ

UIR

Y N

O

10

5

collaborating to conduct courses on

three management systems, namely ISO

9001 Internal Auditor Courses, ISO 14001

Internal Auditor Courses and OHSAS

18001 Internal Auditor Courses.

2. German Institute of Science and

Technology — TUM Asia

With this MOU, the AAIS and TUM

Asia will work together to explore

opportunities to promote composite

technology and know-how to encourage

its application in the aerospace industry.

Areas to be explored include knowledge

and education, training opportunities

and services for potential industrial

projects.

3. VTOC “Fokker” BV

This will involve both organisations

pursuing the development of EASA

certified classroom based modules

and activities for imparting EASA based

education programmes in Singapore.

EvEnts&Exhibitions

Page 70: APMEN April 2013

www.equipment-news.comasia pacific metalworking equipment news April 201368

Accuracy was the theme of the day at the Zeiss 1D User Workshop 2013, held on March 6 at the

Zeiss Metrology Competence Centre, Singapore. Apart from updating participants about the latest software and technology, topics such as CMM maintenance and accuracy were covered as well.

In his talk, Sanjay Pillay, senior regional manager of Southeast Asia at Carl Zeiss explained the relat ionships between measurement accuracy and its various influencing factors that include the environment, operator, workpiece, CMM, and measuring method.

Reducing UncertaintiesInfluences on accuracy include v o lu m e t r i c u n ce r t a i n t i e s from CMM geometry, scales, and construction design, or uncertainties that are due to sensors, holders or software. This

Enquiry No. 3605Turn to page 80a or log on to www.equipment-news.com to enquire

includes guideways, bearings and the structural design of the CMM.

Because the length measuring system is dependent on the scale, uncertainty can be reduced when thermal effects have been eradicated with the use of glass ceramic scales.

Calibration and indexing errors may also occur due to changes in probe angles or heads. The proposed solution for this is to use multiprobes on a fixed head. Software errors on the other hand, can be mitigated by comparing data sets from the machine used to industry benchmarks.

Meanwhile, other uncertainties may be caused by the environment, such as humidity, contamination, vibrations and temperature. In fact, temperature affects everything from the probe to the work piece and machine, and is by far the largest influencing factor. Temperature fluctuations might also occur, depending on the

amount of heat sources and their positions. In such cases, rotating fans may be used to improve circulation and create an even distribution of heat.

Determining The Bend The next major contributor of accuracy after temperature is probe bending. Bending is inev itable as every tact i le sensor system requires some deflection, a result of force on the stylus, in order to record sensor coordinates. Bending is affected by stylus stiffness, measuring force, extensions and the number of joints in the probe, where lesser joints result in greater stiffness.

Likewise, its effects can be reduced by using less measuring force, increasing the styluses’ stiffness by increasing its diameter, or determining the extent of bending during measurement and then compensating for it.

Stiffness can be enhanced by using a short, thick stylus as opposed to a thinner and longer one, while bend determination can be calibrated depending on whether it is static or dynamic.

For example, passive calibration is conducted for XXT sensor, where concentric scanning with three different deflections is used to determine the stiffness of the stylus, and six points calibration is used for determining the probe tip geometry. For active sensor, tensor calibration is conducted by measuring up to 30 points with two different forces each.

Dynamic bend on the other hand, is resultant of both the measuring force and dynamics of the machine (eg: centrifugal force). It can be determined by scanning in three planes at two different speeds, together with tensor calibration. According to Mr Pillay, these capabilities are exclusive to the company’s Vast Gold, Vast XT Gold and option navigator.

Measured ForAccuracy

Maintaining the accuracy of CMM measurements requires a multi-faceted approach, where precision is dependent on a myriad of factors. By Sherlyne Yong

EvEnts&Exhibitions

Page 71: APMEN April 2013

April 2013 asia pacific metalworking equipment news www.equipment-news.com 69

Organiser for indometal h a s d e c l a r e d a s u c c e s s f u l d e b u t . T h e i n t e r n a t i o n a l

metal & steel trade fair for Southeast Asia closed on a positive note reporting that 259 exhibiting companies from 26 countries including 70 local and Indonesian-based have taken part.

In addit ion, six national groups and pavilions (Austria, China, Italy (2), the UK and Taiwan) and an official group under the Ministry of Industry Republic of Indonesia showcased their products and services as well. In total, some 6,228 targeted and qualified visitors from more than 20 countries attended the show.

According to the organiser, the first edition of the show focused on the synergist ic i n te r re la t io n s o f fou nd r y technology, casting products, metallurgy and thermoprocess technology.

Enquiry No. 3606Turn to page 80a or log on to www.equipment-news.com to enquire

Indonesian MarketWith the trend in steel production s h i f t i n g f r o m m a t u r e to emerging economies, and the industry focus on future growth through expanded production, operational agility and efficiency and cost optimisation, Indonesia is the idea l locat ion for a specialised trade fair.

C o m m e n t i n g o n t h e importance of the Indonesian market, Winfried Resch from the German Engineering Federation (VDMA) said: “The market is still small and is starting to grow, but the demand definitely exists. That is why it is important to have an exhibition here at the right time.” The VDMA is one of the key association service providers in Europe and offers the largest engineering industry network in Europe.

T h e W o r l d F o u n d r y Organization (WFO) from the UK also saw potential in the exhibition and is planning to join in the 2014 edition in order to take

advantage of the market growth opportunities in Indonesia. “The British government sees Indonesia as one of the hotspots for the export market at the moment, so they are naturally interested to be present here,” commented Andrew Turner from the WFO.

This sentiment was echoed by exhibitors from the Austrian, Italian and Taiwanese Pavilions who have also shown interest in joining indometal 2014.

Concurrent EventsHeld alongside the exhibition were a series of business seminars, conferences and networking sessions. A seminar focusing on the metal and steel industry’s role w ith in the Indone sia Economic Master Plan 2011-2025 was presented. The seminar was organised by the Federation of Indonesian Metalworks & Machinery Industries Association (GAMMA).

A n o t h e r s e m i n a r o n ‘The Development of Mineral Dow nstrea m in Indonesia’ highlighted presentations by indometal 2013 exhibitors as well as industry topics which included: ‘Roadmap of Dow nst re a m Metals Minerals in Indonesia’ and ‘Primary Energy to Support The Development of Smelter Industry in Indonesia’. The series was attended by some 130 representatives from the metal and steel industry as well as delegates from the Indonesian government.

Jakarta Internatonal Expo KemayoranJakarta, IndonesiaFebruary 20 – 23, 2013

Event Review:

Indometal

EvEnts&Exhibitions

Page 72: APMEN April 2013

www.equipment-news.comasia pacific metalworking equipment news April 201370

Enquiry No. 3608Turn to page 80a or log on to www.equipment-news.com to enquire

Enquiry No. 3609Turn to page 80a or log on to www.equipment-news.com to enquire

EvEnts&Exhibitions

Enquiry No. 3607Turn to page 80a or log on to www.equipment-news.com to enquire

The 19th edition of Metaltech will take place on May 21 – 25, 2013 at Putra World Trade Centre in

Kuala Lumpur, Malaysia. With some 25,000 visitors expected to participate, organiser Trade-Link Exhibition Services have

Event Preview:

Metaltech

managed to bring in some 1,500 exhibiting companies. This year’s event will also witness six national pavilions from Austria, China, Germany, South Korea, Singapore and Taiwan.

Endorsed by the Ministry of International Trade & Industry

(MITI), Malaysia External Trade D eve lopment Cor p orat ion ( M AT R A D E ) , t h e G l o b a l Association of the Exhibition Industry (UFI) and Sirim Berhad, the show will be incorporating WeldTek, the Welding Technology exhibit ion and IATech, the Malaysia International Robotics & Automat ion Technolog y Exhibition. Together, the show is expected to take up 30,000 sq m (gross) of total exhibition area.

Visitors can expect to interact with exhibitors mainly dealing with sheet metal technology, machine tools, software programs, metrology, mould & die, tools and surface & heat treatment technology.

Putra World Trade CentreKuala Lumpur, MalaysiaMay 21 – 25, 2013

Carl Zeiss: Table-Top Optical CMM DMG/Mori Seiki: Fast & Precise

The O - Inspect 322 is an entry level table-top

optical CMM from Carl Zeiss. It is equipped with a multi-point contact scanning Vast XXT

as well as a 12x telecentric discovery zoom lens from Carl Zeiss Microscopy,

which compensates for deviations with additional zoom range.

According to the manufacturer, true 3D form and position measurements are possible with minimal probing forces.

T h e f i r s t j o i n t development from DMG/Mori Seiki is the MillTap 700 compact machining centre. T h e p r o d u c t i v e m ac h i ne s t a nd s

out with its patented tool changes (0.9 s tool

change times), stable base construction for high-performance milling as well as its Siemens 840D solutionline operate control technology.

As the only machine in this segment, the machine can be optionally equipped with a measuring system in X/Y/Z for the best repeatability and consistent precision.

Enabling milling and drilling in one setup on a small footprint, the machine is designed for automotive or electronics mass production and will celebrate its Malaysia Premiere at the show.

Products at MEtaltEch2013

Page 73: APMEN April 2013

April 2013 asia pacific metalworking equipment news www.equipment-news.com 71

Enquiry No. 3612Turn to page 80a or log on to www.equipment-news.com to enquire

Enquiry No. 3610Turn to page 80a or log on to www.equipment-news.com to enquire

Enquiry No. 3613Turn to page 80a or log on to www.equipment-news.com to enquire

Enquiry No. 3611Turn to page 80a or log on to www.equipment-news.com to enquire

EvEnts&Exhibitions

Hasil Karya: Ermaksan Laser Cutting Machine

Ermaksan has developed the Lasermak. The laser cutting machine has been described by the manufacturer as a machine that meets expectations in performance, velocity, accuracy, application range, and maintenance costs.

In addition, the machine is said to be reliable and strong. Its mono block construction and dynamism is manufactured by combining the company’s 40-year old experience in the sector.

Hexagon Metrology: CMM For Sophisticated Parts

A solution for high tolerance parts and sophisticated mea surement ta sk s t h a t r e q u i r e t h e assistance of CAD models, G lob a l Pe r fo r m a nce comes standard with a t o u c h - t r i g g e r probe, temperature compensation, as well as software with CAD capability, training, and warranty.

The Performance model also has the added benefit of being upgraded to accommodate a variety of contact and non-contact scanning sensors.

The standard package includes Tesastar-sm motorised probe head and Tesastar-mp touch trigger probe; PC-DMIS CAD; FB2 scan capable controller and various accessories.

Products at MEtaltEch2013

Guhring: Keeping Things In Order

G u h r i n g ’ s T o o l Management Software GTMS facilitates tool management and brings order to tool storage.

Three tool dispensing systems (TM 326, TM 426 and TM 526) will aim to meet demands

through modern, secure and intelligent tool storage and dispensing systems. Every individual tool dispensing system is of modular design. This allows the customer to choose from combinations of drawers, spiral units, pull-outs and compartments, where everything from indexable inserts, drilling, milling and threading tools have their place.

Hwacheon: Stable High Speed Cutting

The Vesta-1000 by Hwacheon is said to have a tough machine structure, according to the manufacturer. The rigid C-type machine structure, designed with the help from finite element analysis, minimises any distortion which may occur from changes in machining environment and condition. All axes integrate Roller LM Guide for fast and stable feed.

The manufacturer also claims the machine’s spindle is integrated directly into the motor for stable, high-speed cutting. The spindle is grease-lubricated and jacket cooled to minimise the thermal displacement and to increase the life of the spindle assembly. Finally, the air curtain design prevents any foreign substances from entering.

Page 74: APMEN April 2013

www.equipment-news.comasia pacific metalworking equipment news April 201372

Enquiry No. 3614Turn to page 80a or log on to www.equipment-news.com to enquire

Enquiry No. 3616Turn to page 80a or log on to www.equipment-news.com to enquire

Enquiry No. 3615Turn to page 80a or log on to www.equipment-news.com to enquire

Enquiry No. 3617Turn to page 80a or log on to www.equipment-news.com to enquire

EvEnts&Exhibitions

The Equator 300 gauging system by Renishaw is a versatile alternative to custom gauging, offering inspection of a variety of manufactured parts.

A l l the gaug ing systems are supplied w ith the industr y standard SP25 three-axis analogue scanning probing module. In addition, the Equator 300 comes packaged with two SH25 stylus holders and two styli. One of them is a straight stylus with 21 mm length and 5 mm ball diameter and the other is a straight stylus with 75 mm length and 8 mm ball diameter.

Finally, the manufacturer says the Equator 300 Controller can be ordered pre-loaded with two different levels of software. They are Modus Organiser, which is for shop floor operation and the Modus Organiser and Modus Equator, for programmers.

Mazak: Vertical Machining Centre Renishaw: Gauging System

Sodick: Sinker EDM

The Vertical Centre Smart 430A S (VCS430A S) provides value for a variety of machining operations from heavy duty machining to high-speed machining. With its high rigidity construction and machine control technology, it is designed to provide higher accuracy machining to meet the demands of the various manufacturing industries.

Equipped with Mazak Fanuc Controller for EIA/ISO format programs, the machining centre has a table size of 900 mm x 430 mm and is capable of handling a spindle speed up to 12,000 rpm for machine milling operations.

The AG40L Sinker EDM features Sodick’s Linear Motor Technology. In addition, it features a no-flush EDM technology, user-friendly control and zero electrode wear combined with increased machining speed.

Some of the notable features are: linear motor drives (X, Y and Z Axes); a 10-year positioning guarantee; glass scale feedback (X, Y and Z Axes); LAN connection port; and energy saving circuit.

Mitutoyo: High Accuracy Digimatic Micrometer

Mitutoyo has claimed to have developed the world’s first 0.1 um micrometer. Enabling 0.1 μm resolution measurement, the micrometer is suitable for customers who need to make accurate measurements with a hand-held tool.

The micrometer utilises the company’s 0.1 μm resolution ABS (absolute) rotary sensor and screw machining technology to reduce the instrumental error to ±0.5 μm, delivering higher accuracy without sacrificing operability.

Finally, a rigid frame and constant-force mechanism enable more stable measurement, while the clicks emitted as the workpiece is being measured assures the operator that measurement is proceeding normally.

Products at MEtaltEch2013

Page 75: APMEN April 2013

April 2013 asia pacific metalworking equipment news www.equipment-news.com 73

Enquiry No. 3618Turn to page 80a or log on to www.equipment-news.com to enquire

Event Preview:

Intermach 2013I

n t e r m a c h 2 0 1 3 w i l l b e one o f t he la rge st industrial machinery and subcontracting exhibitions

in ASEAN, according to organiser UBM Asia (Thailand). It will host over 1,200 manufacturers and distributors of industrial machinery who will be arriving from 35 countries. Over 4,000 pieces of the latest technology — some of which is being displayed for the first time in ASEAN and Thailand — will be featured.

Keeping up the posit ive tone is Sanchai Noombunnam, project director for Intermach a nd Subcon T ha i la nd . He said: “Because of the success enjoyed by our customers in 2012, Intermach 2013 will be about 17.5 percent bigger and the number of exhibitors will be up by 20 percent. We are also expecting to welcome more than 40,000 qualified visitors from 35 countries around the world.”

Internationality of the show is not limited to visitors. The organiser revealed that the 2013 edition of the show will play host to 10 national pavilions mainly from Japan, Ta iwan, South Korea, China and the Czech Republic. ASEAN Supporting Industries, Enhancement of M o u l d a n d D i e I n d u s t r y Competitiveness Project, and Thai Subcontracting Promotion Association will also be featured in their own special Pavilions.

In addition, the 2013 show will also have a Japanese Zone spotlighting the country’s top manufacturers of machinery, equipment, and industrial parts. During the course of the show, many activities, presentations and regional seminars will take place.

Intermach 2013 will be co-

located with Subcon Thailand, ASEAN’S international industrial sub co nt rac t i n g e ve nt for procurement parts and business match-making. Finally, Sheet Metal Asia 2013 — a showcase of sheet meta l fabr icat ion machinery in the region, will run in conjunction with both shows.

BITECBangkok, ThailandMay 16 - 19, 2013

Sanchai Noombunnam

EvEnts&Exhibitions

Page 76: APMEN April 2013

www.equipment-news.comasia pacific metalworking equipment news April 201374

Enquiry No. 3619Turn to page 80a or log on to www.equipment-news.com to enquire

Sub co n T h a i l a n d i s organised by Thailand Board of Investment (BOI), Thai Subcontracting

Promotion Association, and UBM Asia (Thailand). Now in its 7th edition, the event helps provide meaningful linkage between industrial part buyers and part manufacturers. Major regional and international corporations, industrial part buyers and entrepreneurs from both domestic and international companies from 15 countries will meet with over 300 quality part

Subcon Thailand 2013: Opening The Door To Opportunities

manufacturers. In terms of exhibits that will be on show, visitors can expect to see over 2,500 industrial parts in the automotive, electrical appliance, electronic components and machinery industries.

“One of the strengths of Thai manufacturing is the quality and capabilities of the supporting and subcontracting industries. Subcon Thailand will provide opportunities for buyer firms seeking sourcing networks in Thailand and ASEAN. The event is expected to attract large corporations from all over Asia

to give them the opportunity to take part in the business matchmaking program online with top-notch quality part manufacturers,” said Narucha Ruchuphan, director, BOI Unit for Industrial Linkage Development (BUILD).

Some of the event highlights are:

• A full display of industrial parts from 10 countries — over 300 booths.

• Activities and pavilions featuring Osaka, Toyoma and Kanagawa from Japan; JETRO Bangkok and part manufacturers from the ASEAN region including the Fastener Showcase; ASEAN Supporting Association booth; Enhancement of Mould and Die Industry Competitiveness Project; and Thai Subcontracting Promotion Association.

• Business matchmaking with participating industrial part manufacturers.

• Buyer’s Village — an area where industrial part buyers display their need for specific parts.

• Buyer presentations — individual presentations from industrial procurement officers who will provide details on their requirements and procurement policies.

• Activities and seminars featuring entrepreneurs from ASEAN and international markets.

BITEC Bangkok, ThailandMay 16 – 18, 2013

Narucha Ruchuphan

EvEnts&Exhibitions

Page 77: APMEN April 2013

April 2013 asia pacific metalworking equipment news www.equipment-news.com 75

The biennial event MTT Indonesia returns to Jakarta from May 22 – 25, 2013 at J IExpo.

Experts from the machine tool, metalworking and industrial automation fields will be present to lead the audience through their innovations that will no doubt make an impact in today’s manufacturing world.

Industry stalwarts such as Makino and Yamazen from Japan, AgieCharmilles and Rollomatic from Switzerland, Citra Naga Cemerlang and Omega Taiyo Teknologi from Jakarta will be exhibiting at the show.

Technologies On ShowIn EDM, AgieCharmilles will exhibit the Cut 20P, an EDM wirecutting unit. The machine handles wire diameters from 0.15 to 0.30 mm and is flexible to satisfy most of

Enquiry No. 3620Turn to page 80a or log on to www.equipment-news.com to enquire

the requirements in the field of general engineering and standard stamping. It also allows a speed cut. These technologies optimise main, second and third finishing cuts, to attain the most common values of surface roughness, like Ra 0.60 μm and Ra 0.35 μm to be achieved in a minimum of time.

Elsewhere, Makino will bring fore their U3. With a 3μmRz/ 3pass capability, it cuts faster than other technologies. According to the manufacturer, the mechanical structure of the machines also assures that movements between details will be accurate anywhere within the work envelope. This combination of speed, finish, and repeatability will help increase productivity.

O ver at t he mach in ing segment, Hwacheon Asia Pacific will showcase the Hi-Tech 450,

which has an integrated 45-degree angle bed frame to minimise heat distortion; along with a guide surface and bed design to absorb the vibration sufficiently, to ensure precision at hard turning. All guide surfaces are rectangular and incorporate tack guide to maintain rigidity and accuracy in prolonged operation.

The gear transmission system allows for high-torque turning at low speed and also high speed turning. The transmission and the spindle motor are designed separately so that the heat and the vibration generated from the transmission do not interfere with the spindle axis.

The exhibition is open to trade and business visitors from 1030 to 1830 hours on all days and admissions are strictly by registration only. Online registration will close on May 18, 2013.

ConferenceAs technology advances, the world becomes smaller and everyone is just a touch away in communication, both near and far. With higher technologies and wider choice of alternatives, manufacturing becomes simplified with productivity amplified and quality magnified.

B e a r i n g t h a t i n m i n d , the organiser wil l run the Techno Seminar alongside the exhibition where the know-how and applications of advanced technologies are explored and revealed in-depth. Complimentary seats are limited and reservations are on first-come first-served basis. Interested delegates are to contact the organiser for more details.

JIExpoJakarta, Indonesia May 22 - 25, 2013

Event Preview:

MTT Indonesia

Cut 20P Hi-Tech 450 U3

EvEnts&Exhibitions

Page 78: APMEN April 2013

Enquiry No. 3701Turn to page 80a or log on to www.equipment-news.com to enquire

Enquiry No. 3703Turn to page 80a or log on to www.equipment-news.com to enquire

Enquiry No. 3702Turn to page 80a or log on to www.equipment-news.com to enquire

Enquiry No. 3704Turn to page 80a or log on to www.equipment-news.com to enquire

Aicon: High Resolution Camera Systems

Delcam: Feature-Based CAM

Aicon has developed an optical measuring system called MoveInspect HR and the hand-held MI.Probe. Together, they are said to allow precise and quick measurements.

According to the manufacturer, while using common measuring arms, measurement of large objects can be very time-consuming and the repositioning of the arm during the procedure can cause errors.

Optical measuring system on the other hand is precise and versatile. It can be used for mobile or fixed application. In mobile use, the carrier is measured on site with the probe. In static use, the system is integrated in a measuring unit. Both applications compare the relevant points with the nominal data. Possible misalignments are signalised and can directly be adjusted online.

The 2013 R2 version o f D e l c a m ’ s F e a t u r e C A M , a feature-based CAM software incorporates a number of stock mo de l opt ion s t hat a llow users to increase productivity, improve surface finish and reduce tool wear. Other enhancements in this release include methods for the generation of html set-up sheets, and improvements to turning and turn-mill programming.

The software program also incorporates a method for generating html set-up sheets. Information can be extracted from the FeatureCAM project to provide a detailed list of the tooling to be used, with an illustration of each tool, together with the dimensions of the initial stock and an image of the finished part.

Rockwell Automation: Compact Drives

Rockwell Automation has launched its Allen-Bradley PowerFlex 525 AC drive to help machine builders and end users simplify equipment design and operation, along with speed installation and configuration.

Representing the first in the company’s next generation of compact drives, the drive features a modular design in power ranges from 0.5 to 30 horsepower or 0.4 to 22 kW at 100 to 600 volt input. Its embedded EtherNet/IP, safety, USB programming, energy savings and a variety of motor-control options are suited for machine-level and stand-alone applications or simple system integration.

Suitable for a range of applications, including conveyors, material handling, compressors, fans and pumps, the drive provides a variety of motor-control options to accommodate open and closed-loop applications.

Epson: SCARA Robots

With its H8 robots, the first models in Epson’s H series of horizontally articulated SCARA robots are capable of handling payloads up to 8 kg, and are available in models with arm lengths of 450 mm, 550 mm, and 650 mm.

The industrial robots are used to transport and assemble parts on production lines particularly in the electronics and automotive industries.

According to the company, in high-speed mode, H8 robots operate up to 40 percent faster than their G6 models, and in low-vibration mode they produce 50 percent less vibration.

www.equipment-news.comasia pacific metalworking equipment news April 201376

ProductFinder

Page 79: APMEN April 2013

Enquiry No. 3705Turn to page 80a or log on to www.equipment-news.com to enquire

Schuler: Knuckle-Joint Press

Knuckle-joint presses with servo drive are flexible machines

used in many areas o f m e t a l f o r m i n g technology. Schuler recent ly unvei led an enhancement of its line, which saw a precision blanking and forming press with a force of 6,300 kN produce parts with a smooth cut ratio of up to 90 percent.

The main feature of this range is the vastly improved rigidity of

the entire system, which makes it possible to minimise the cutting gap. The resulting parts have very smooth and even cut surfaces with sharply right-angled edges.

ENQ

UIR

Y N

O

10

0EN

QU

IRY

NO

0

83

Pure powerHigh-performance drives with flexible shafts from SUHNER - for high torque applications. Flexible and easy to use.

www.suhner.com

SUHNER Abrasive Expert AG P.O. Box CH–5201 BruggPhone +41 (0)56 464 28 80 [email protected]

Shanghai Tong Lee Hardware Pte Ltd.200 Jalan Sultan#01-01 Textile CentreSingapore 199018Phone (65) 6291 7288 (5 lines)[email protected]

April 2013 asia pacific metalworking equipment news www.equipment-news.com 77

ProductFinder

Page 80: APMEN April 2013

Enquiry No. 3706Turn to page 80a or log on to www.equipment-news.com to enquire

Enquiry No. 3708Turn to page 80a or log on to www.equipment-news.com to enquire

Enquiry No. 3707Turn to page 80a or log on to www.equipment-news.com to enquire

Enquiry No. 3709Turn to page 80a or log on to www.equipment-news.com to enquire

Walter: Threading Blind Hole In Steel Materials

Walter has expanded the Paradur X•pert P line. The tool can optionally be supplied with a TiN or THL coating. Features such as 45 degree helix angle, chamfer according to form C and a tapered guide ensure thread cutting in blind holes up to a depth of 3.5xD. As a secondary application, the tool is also suitable for Al-Si alloys with an Si content of 0.5 to 12 percent.

Except for metric thread M2 to M64 and M2.5 x 0.35 to M52 x 3, it is available in many inch versions (UNC, UNF, UNEF, UN-8, G, BSW). In addition, the catalogue range also contains left-hand thread variants (LH) and variants with interrupted teeth (AZ). The user can also choose from three tool lengths M, L and XL, alongside tolerance classes 4H, 6H, 6G, 7G, 2B and 3B.

TaeguTec: Universal Metal Cutting Solutions

T a e g u T e c h a s developed its high-speed steel l ine of taps that provides universal metal cutting solutions on various materials. The line offers two different

flute geometries for both through and blind-hole

applications. The HSSE-cobalt T-Tap line

expands the manufacturer’s threading range beyond milling and turning applications with carbide tools to high speed steel. It is said that the tap is suitable for steel, stainless steel and cast iron applications.

The material used in the line is offered in three different grades: uncoated, steam tempered or titanium nitride. No matter the coating, the line enables productivity and economy on a wide range of materials.

Suhner: Grinding Wheels

With its Tigerbite finned grinding wheels, Suhner has developed a solution for effective machining of stainless steel. Working temperature is now lower due to the active grinding layer, which effectively eliminate damage to the surface like discolouration. Compared with conventional roughing or fibre wheels, the grinding wheel makes work a more pleasant and smoother experience.

Elsewhere, the Vulcano roughing wheel was developed specifically for machining curved surfaces. Its vulcanised geometry enables the wheel to adapt to all curved surfaces. It is therefore suitable for turbines and blades in power stations.

Featuring ceramic grains, this roughing wheel is a product with a removal rate and service life fit for the maximum requirements. With a thickness of 4 mm, the wheel is a flexible roughing wheel.

Seco: More Options For Exchangeable-Tip Drills

Now available with 8xD options, Seco’s Crownloc Plus offers benefits in terms of both productivity and cost effectiveness. The drills incorporate an exchangeable-tip system that eliminates the need to replace an entire tool. Instead, when the cutting edge becomes worn, the user simply removes and replaces the tip of the tool with the Crownloc Plus wrench.

Crownloc Plus drill bodies contain deep and wide flutes that optimise chip evacuation and contribute to a long tool life. The cutting head tips incorporate optimised geometries and a TiAlN coating to boost performance and wear resistance.

Available in diameters ranging from 12.00 to 19.99 mm, the drills are available in 3xD and 5xD options in addition to the 8xD models.

www.equipment-news.comasia pacific metalworking equipment news April 201378

ProductFinder

Page 81: APMEN April 2013

April 2013 asia pacific metalworking equipment news www.equipment-news.com 79

May2 - 4Inamarine 2013Jakarta International Expo (JIExpo)Jakarta, IndonesiaGEM [email protected]

16 – 18Subcon Thailand 2013BITECBangkok, ThailandUBMwww.subconthailand.com

16 – 19Sheet Metal Asia 2013BITECBangkok, ThailandUBMwww.sheetmetalexhibition.com

16 – 19Intermach 2013BITECBangkok, ThailandUBM Asia [email protected]

21 – 25Metaltech 2013PWTCKuala Lumpur, MalaysiaTradelink [email protected]/metaltech

22 – 25MTT 2013Jakarta International ExpoJakarta, [email protected]

23 - 25Indo AutomotiveJakarta International Expo (JIExpo)Jakarta, IndonesiaPT Wakeniwww.indoautomotive.com/contactuswww.indoautomotive.com

June12 - 15Manufacturing Surabaya 2013Grand City Convention & Exhibition CentreSurabaya, IndonesiaPT Pamerindowww.pamerindo.com

20 – 23Manufacturing Expo 2013BITECBangkok, ThailandReed [email protected]

July2 - 5MTA Vietnam 2013SECCHo Chi Minh City, [email protected] www.mtavietnam.com

SepteMber4 – 6Vietnam Manufacturing Expo 2013ICE HanoiHanoi, VietnamReed Tradexvietnammanufacturingexpo@reedtradex.co.thwww.vietnammanufacturingexpo.com

4 - 7Mining IndonesiaJakarta International Expo KemayoranJakarta, IndonesiaPT Pamerindowww.pamerindo.com

To be considered for inclusion in the calendar of events, send details of event to:

OctOber10 – 12Metalex Vietnam 2013SECCHo Chi Minh City, VietnamReed [email protected]

nOveMber13 - 15Oil & Gas Indonesia 2013Jakarta International Expo KemayoranJakarta, IndonesiaPT Pamerindowww.pamerindo.com

20 – 23Metalex 2013BITECBangkok, ThailandReed [email protected]

DeceMber4 - 7Manufacturing IndonesiaJakarta International Expo KemayoranJakarta, IndonesiaPT Pamerindowww.pamerindo.com

The Editor (APMEN)Eastern Trade Media1100 Lower Delta Road, EPL Building, #02-05 Singapore 169206Email: [email protected] • Tel: +65 63792888

www.equipment-news.com

2013

exhibitiOnprOgraMMeS

Vis

it Us

Vis

it Us

Vis

it Us

Vis

it Us

Vis

it UsVis

it Us

Vis

it Us

Vis

it Us

Vis

it Us

Vis

it Us

Vis

it Us

Page 82: APMEN April 2013

www.equipment-news.comasia pacific metalworking equipment news April 201380

Advertisingindex

ADVERTISING SALES OFFICES

HEAD OFFICESINGAPORE EASTERN TRADE MEDIA PTE LTD 1100 Lower Delta Road, EPL Building #02-05, Singapore 169206 Tel: 65-6379 2888 Fax: 65-6379 2805/2806 E-mail: [email protected]

FOREIGN REPRESENTATIVES

JAPAN Ted Asoshina Echo JAPAN coRPoRATIoN Tel: 81-3-3263 5065 Fax: 81-3-3234 2064 E-mail: [email protected]

KOREA Young-Seoh chinn JES MEDIA INTERNATIoNAL Tel: 82-2-481 3411/3 Fax: 82-2-481 3414 E-mail: [email protected]

SWITZERLAND Rene Bachmann MEDIALL SA Tel: 41-56-442 14 40 Fax: 41-56-442 27 77 E-mail: [email protected]

TAIWAN Robert Yu WoRLDWIDE SERvIcES co., LTD Tel: 886-4-2325 1784 Fax: 886-4-2325 2967 E-mail: [email protected]

U. KINGDOM Eddie Kania RoBERT hoRSFIELD INT'L MEDIA REP. Tel: 44-1663-750 242 Fax: 44-1663-750 973 E-mail: [email protected]

This index is provided as an additional service. The publisher does not assume any liability for errors or omissions.

The closing date for placing advertisements is not less than FOUR WEEKS before the date of publication. Please contact our nearest advertising office for more details.

Manufacturers and advertisers that are featured in this issue will send you free information about their products and services. Fill up the Product Enquiry Form on-line at www.equipment-news.com.

enquiry no.

Page no.Advertiser

BENIGN ENTERPRISE co LTD 45 097

BYSTRoNIc PTE LTD 03 093

DELcAM PLc 05 017

EMo 2013 23 090

EvERISING MAchINE co 47 102

FRITZ STUDER AG IBc 085

hAAS AUToMATIoN INc 09 082

hAIMER ASIS PAcIFIc LTD 21 107

hEIMATEc GMBh 51 089

hEXAGoN METRoLoGY ASIA PAcIFIc PTE LTD 17 103

hURco (S.E.ASIA) PTE LTD Fc 088

hWAchEoN ASIA PAcIFIc PTE LTD 19 087

IFM ELEcTRoNIcS PTE LTD 33 094

IScAR LTD IFc 092

KENNAMETAL INc Bc 068

LvD coMPANY Nv 41 098

NATIoNAL INSTRUMENTS 29 106

NEWELL RUBBERMAID – LENoX 35 056

oKUMA TEchNo (ThAILAND) LTD 01 198

oPTIcAL GAGING (S) PTE LTD 37 086

REED TRADEX coMPANY (MANUFAcTURING EXPo ThAILAND 2013) 55 096

RENIShAW (hoNG KoNG) LTD 31 108

SINGAPoRE EXhIBITIoN SERvIcES PTE LTD (MTA vIETNAM 2013) 59 014

SUhNER ABRASIvE EXPERT AG 77 083

TAEGUTEc co 11 101

TAIWAN TAKISAWA TEchNoLoGIES co LTD 67 105

ToRNoS TEchNoLoGIES ASIA LTD 43 007

TRADE-LINK EXhIBITIoN SERvIcES SDN BhD (METALTEch 2013) 53 209

TRUMPF PTE LTD 14 / 15 095

TUNGALoY SINGAPoRE (PTE) LTD 13 091

UBM ASIA (ThAILAND) co LTD (INTERMAch 2013) 49 072

vISIoN WIDE TEch co LTD 77 100

WALTER AG SINGAPoRE PTE LTD 07 084

WIKUS SAGENFABRIK WILhELM h KULMANN GMBh & co KG 25 178

YIh chUAN MAchINERY co LTD 57 099

Page 83: APMEN April 2013

ENTER PRODUCT ENQUIRY NUMBER HEREFOR FAST INFORMATION !

YOUR READERREGISTRATION NO. _________________________ Enquire online @ www.equipment-news.com OR Complete and post to: Eastern Trade Media Pte Ltd, 1100 Lower Delta Road, EPL Building #02-05 Singapore 169206 OR fax to: 65-6379 2806 (Singapore)

To: The Manager, Circulation Department,

From: (Surname) ____________________________________ (Given Name) ________________________________

Job Title: ___________________________________________

Company: __________________________________________

Address: ___________________________________________

__________________________________________________

Country: _________________ Tel: __________________ Fax: _________________ E-mail: __________________

Do you want to receive (continue to receive)Asia Pacific Metalworking Equipment News?❑ YES / ❑ NO (Not valid without signature)

Signature ___________________ Date _________________

SIzE OF COMPANY❑ 001 1 – 10 ❑ 002 11 – 30 ❑ 003 31 – 50 ❑ 004 51 – 100 ❑ 005 101+

TYPE OF BUSINESS (Please ✔ ONE box only)

Do you use METAL in your production/manufacturing process? ❑ Yes ❑ No

Do you use machine tools and related equipment? ❑ Yes ❑ No

Do you use automation systems & equipment? ❑ Yes ❑ No

Note: This form must be duly completed and signed.______________

ENTER ENQUIRY NUMBER (S)

No. 3 2013

YOUR BUSINESS ACTIVITY (Please be specific)

❑ 221 Basic Metal/Foundaries/Mills

❑ 150 Electrical & Electronics production

❑ 222 Telecommunications Equipment Manufacturing

❑ 120 Aircraft maintenance/components mfg.

❑ 223 Dies & Moulds mfg.❑ 122 Motor Vehicles Parts❑ 123 Shipbuilding

❑ 160 Design & Consultancy Services❑ 180 Govt bodies, Trade Assns, Exhibitions Cos.❑ 200 Agent/Distributor/Trader of Machine Tools & Accessories❑ 224 Mechanical, Fabrication and all other metal engineering works

❑ 078 OThERS (Please specify) ____________________________________

❑ 300 CNC Machining

❑ 303 Milling

❑ 306 Gear Cutting

❑ 309 Grinding

❑ 315 Stamping

❑ 318 Shearing

❑ 321 EDM/ECM

❑ 324 Inspection/Measuring/Testing

❑ 301 Design with CAD/CAM

❑ 304 Drilling/Boring

❑ 307 Tapping/Threading

❑ 310 Lapping/honing

❑ 313 Forging

❑ 316 Rolling

❑ 319 Die Casting

❑ 322 Welding

❑ 302 Turning

❑ 305 Coil Forming

❑ 308 Broaching

❑ 311 Plastic Moulding

❑ 314 Pressworking

❑ 317 Automated Assembly

❑ 320 Beading

❑ 323 Electroplating

YOUR METAL PROCESS USED ? (Please be specific)

❑ 350 OThERS (Please specify) ____________________________________________________________________________________________

JOB FUNCTION (Please be specific)

❑ 021 Senior & Middle Management

❑ 023 Maintenance Engineering

❑ 025 Research & Devt

❑ 028 Testing & Inspection

❑ 030 Sales & Marketing

❑ 022 Production Engineering

❑ 024 Quality Control/Assurance❑ 026 Design Engineering

❑ 029 Purchasing/Sourcing

❑ 027 OThERS (Please specify)

www.equipment-news.com

(Refer to Advertising Index for Advertisers’ enquiry numbers)

ASIA PACIFIC METALWORKING

The Engineering Journal For Manufacturing, Automation & Quality Control

TYPES OF PRODUCTS TO BE PURCHASED IN THE NEXT 12 MONTHS❍ Cutting Tools ❍ Machine Tools ❍ Software ❍ Metrology ❍ Others_____________

Page 84: APMEN April 2013

www.equipment-news.com

Name: (Surname) ______________________________________ (Given Name) ___________________________

Company: ____________________________________________ Job Title: ________________________________

Address: _________________________________________________________________________________________

Country: _____________________________________________ Telephone No: __________________________

E-mail: _______________________________________________ Fax No: _________________________________

Signature _____________________________________________ Date ___________________________________

SUBSCRIPTION RATESAIRMAIL (1 YEAR – EIGHT ISSUES)

■ *Singapore/Malaysia S$60.00 *(GST applicable) ■ Asia Pacific/America/Europe/ Others S$100.00

YOUR BUSINESS ACTIVITY (Please be specific)

❑ 221 Basic Metal/Foundaries/Mills❑ 150 Electrical & Electronics production❑ 222 Telecommunications Equipment Manufacturing❑ 120 Aircraft maintenance/components mfg.❑ 223 Dies & Moulds mfg.❑ 122 Motor Vehicles Parts

JOB FUNCTION (Please be specific)

TYPE OF BUSINESS (Please ✔ ONE box only)Do you use METAL in your production/manufacturing process? ❑ Yes ❑ NoDo you use machine tools and related equipment? ❑ Yes ❑ NoDo you use automation systems & equipment? ❑ Yes ❑ No

FAST PERSONAL COPY SUBSCRIPTION FORMINVEST $0.15 PER DAY IN TECHNICAL AND BUSINESS INFORMATION

FOR YOUR CORPORATE STRATEGIES IN SOUTHEAST ASIA

❑ 123 Shipbuilding❑ 160 Design & Consultancy Services❑ 180 Govt bodies, Trade Assns, Exhibitions Cos.❑ 200 Agent/Distributor/Trader of Machine Tools & Accessories❑ 224 Mechanical, Fabrication and all other metal engineering works❑ 078 OThErS (Please specify) ____________________________________

❑ 021 Senior & Middle Management❑ 023 Maintenance Engineering❑ 025 research & Devt

❑ 028 Testing & Inspection❑ 030 Sales & Marketing❑ 027 OThErS (Please specify)

❑ 022 Production Engineering❑ 024 Quality Control/Assurance

❑ 026 Design Engineering❑ 029 Purchasing/Sourcing

YOUR METAL PROCESS USED ? (Please be specific)

❑ 313 Forging❑ 316 rolling❑ 319 Die Casting❑ 322 Welding❑ 302 Turning❑ 305 Coil Forming

❑ 308 Broaching❑ 311 Plastic Moulding❑ 314 Pressworking❑ 317 Automated Assembly❑ 320 Beading❑ 323 Electroplating

■ Cheque/Bank draft - made payable to Eastern Trade Media Pte Ltd

■ Amex ■ Visa ■ Mastercard

Send this Fast SUBSCrIPTION FOrM to Circulation Department, Eastern Trade Media Pte Ltd 1100 Lower Delta Road, EPL Building #02-02, Singapore 169206 or Fax: 65-6379 2806

Note: This form must be duly completed and signed.

Account Number

Expiry Date Signature

Cardholder’s name

Commencing from: Year Month

■ Telegraphic Transfer Payment United Overseas Bank, Singapore Bank Code: 7375 Branch Code: 037 Account No.: 921-343-851-0 Company: Eastern Trade Media Pte Ltd

❑ 321 EDM/ECM❑ 324 Inspection/Measuring/Testing❑ 301 Design with CAD/CAM❑ 304 Drilling/Boring❑ 307 Tapping/Threading❑ 310 Lapping/honing

❑ 300 CNC Machining❑ 303 Milling❑ 306 Gear Cutting❑ 309 Grinding❑ 315 Stamping❑ 318 Shearing

❑ 350 OThErS (Please specify)

• Receipt will only be issued upon request!

Security ID–

Page 85: APMEN April 2013

The Expert for your grinding task

Stay in control of the grinding process with StuderTechnology. Profit from the expert know-how from STUDER for a reliable and economical cylindrical grinding process and improve the payback of your universal STUDER cylindrical grinding machine considerably.

StuderTechnologyIntegrated

Winner of the PRODEX AWARD 2012 (CH)Winner of the intec-Preis 2013 (DE)

The Art of Grinding.

Fritz Studer LtdCH-3602 ThunTelephone +41-33-439 1111Telefax +41-33-439 1112www.studer.com

StuderTechnology –

ENQUIRY NO 085

Page 86: APMEN April 2013

©2013 Kennametal Inc. l All rights reserved. l A-13-03153

Double-sided insert with up to 12 cutting edges for a more productive cutting process.

Higher clearance angles designed in the cutter bodies to permit pocketing, profiling, and 5-axis machining.

Three different insert sizes and three topography styles per size, cover any type of material, component, and application.

Unique anti-rotation feature for excellent stability with higher feed rates and cutting forces while allowing for user-friendly insert rotation.

RodekaTM double-sided round inserts:

• Three insert ICs: 10, 12, and 16mm.

• Innovative, cutting-edge design increases tool life and reduces cutting forces.

• Also offered, RodekaTM 8, a tailor-made solution for turbine blade machining.

Working harder and smarter. That’s RodekaTM

. That’s Different Thinking.

Kennametal introduces a new and revolutionary double-sided round milling insert — Rodeka.

TM

It’s capabilities span multiple types of milling operations and workpiece materials, providing the latest double-sided insert technology to increase your productivity with the most efficient cost per edge. Now That’s Different Thinking. That’s Kennametal.

To learn more about RodekaTM

and the latest machining technologies, contact your authorized Kennametal distributor, call 800.446.7738, or visit www.kennametal.com.

ENQUIRY NO 068