api 603 stainless steel valves - razvalve ?· api 603 stainless steel valves ... comply with api &...

Download API 603 STAINLESS STEEL VALVES - RazValve ?· api 603 stainless steel valves ... comply with api & asme…

Post on 06-Jul-2018

218 views

Category:

Documents

2 download

Embed Size (px)

TRANSCRIPT

  • ANSI Class 150 and 300GATE, GLOBE & CHECK VALVES

    Y-STRAINERS

    API 603 STAINLESS STEEL VALVES

    OneSteel Trading Limited ABN 50 007 519 646Valves & Actuation National Office - Phone: 03 9566 9776 Fax: 03 9566 9735

    valves@onesteel.com

    CONTACT YOUR NEAREST ONESTEEL OFFICE

    Doc 73 October 2003

  • EMICO STAINLESS STEEL VALVES

    COMPLY WITH API & ASME STANDARDS AND

    ARE WIDELY USED IN CHEMICAL,

    PETROCHEMICAL, FOOD & BEVERAGE, PULP &

    PAPER, MINING AND OTHER PROCESS PLANTS

    THROUGHOUT THE WORLD.

    EMICO VALVES ARE MANUFACTURED UNDER

    STRICT QUALITY CONTROL AND ARE SUITABLE

    FOR USE IN CORROSION RESISTANT

    APPLICATIONS.

    OneSteel has taken reasonable care to ensure accuracy of the material in this catalogue but you should not rely on the whole or any part of the information whichis subject to change without notice for reasons including error rectification, product discontinuation, new product introduction. OneSteel expresslydisclaims all liability whatsoever for (including any direct or indirect loss or damage, costs or expenses howsoever incurred by any person) or reliance on the wholeor any part of the information contained in or omitted from this catalogue and recommends that you verify any information with your independent expert adviserand rely solely on that advisers recommendations.

    Flanged end valve ratings terminate at 538C (1000F).

    ValveClosure

    TestPressure

    Hydrostatic ShellTest Pressure

    CLASS

    C-29~+38

    93149204260316343371399427454482510538

    F-20~+100

    2003004005006006507007508008509009501000

    psig275235205190170140125110958065503520

    psig275235215195170140125110958065503520

    psig720600540495465435430425415405395390380320

    psig720620560515480450445430425420420415385350

    ANSI-150 ANSI-300Service Temperature CF8 CF8M CF8 CF8M

    Hydrostatic

    Air

    425psig 1100psig

    303psig 792psig

    80psig 80psig

    PRESSURE TEMPERATURE RATINGSASME B16.34-1996

  • C O N T E N T S

    ANSI 150 & 300 CAST STAINLESS STEEL GATE VALVES - pg 2/3

    ANSI 150 & 300 CAST STAINLESS STEEL GLOBE VALVES - pg 4/5

    ANSI 150 & 300 CAST STAINLESS STEEL CHECK VALVES - pg 6/7

    ANSI 150 CAST STAINLESS STEEL Y-STRAINER - pg 8

    ANSI 150 CAST STAINLESS STEELY-STRAINER

    DESCRIPTION

    DESIGN STANDARDS

    TEST PRESSURE

    Raised Face flanged ends toANSI Class 150, bolted cover.Size range: 15mm through 300mm.

    Design - ASME B16.34 Shell Wall Thickness - ASME B16.34 Pressure /Temperature Rating -

    ASME B16.34 Flange Dimension - ASME B16.5 Flange Gasket Facing -

    ASME B16.5 (3.2 to 6.3 microns)

    Per API 598 standards ANSI 150 Shell (by Water) -425psig

    8

    SIZEB

    60.570

    79.598.5120.5139.5152.5190.5216

    241.5298.5362432

    in1/23/41

    1 1/22

    2 1/2345681012

    mm15202540506580100125150200250300

    E15202540506580100125150200250300

    H7575100120140175196244277320390430600

    L120140150190210250280340380420500700780

    A8998108127152178190229254279343406483

    C3543517392105127157186216270324381

    D11.211.211.214.315.917.519.123.923.925.428.630.231.8

    n-d4-164-164-164-164-194-194-198-198-228-228-2212-2512-25

    ANSI-150

    n-d

    A B C E

    D

    L

    H

    45

    5 63 21 4

    ANSI CLASS 150

    DIMENSIONS (mm)

    Y-

    ST

    RA

    INE

    R

    Fig EAS-405

    PARTS AND MATERIAL

    NO. PARTS NAME MATERIAL 123456

    BODYBONNETGASKETSCREENPLUGBONNET BOLT/ NUT

    CF8MCF8M

    PTFE (Option: Graphite)SS 316 *AISI 316

    SUS 304 /AISI 304

    * Screen for 15mm-50mm is punched stainless steel plate with 1mm holes.Screen for 65mm and above is punched stainless steel plate with 1.5mm holes.

  • ANSI 150 & 300 CAST STAINLESS STEELGATE VALVES

    PARTS AND MATERIAL

    DESCRIPTION

    DESIGN STANDARDS

    TEST PRESSURE

    Raised Face flanged ends to ANSI Class 150and ANSI Class 300. Integral T-head stem,fully guided flexible wedge, self-aligning gland,integral body seats, outside screw and yoke,rising stem, non-rising handwheel.Size range: ANSI 150 - 15mm through 400mm.

    ANSI 300 - 15mm through 300mm

    Design - API 603 Shell Wall Thickness - API 603 Pressure /Temperature Rating - ASME B16.34 Face to Face Dimension - ASME B16.10 Flange Dimension - ASME B16.5 Flange Gasket Facing -

    ASME B16.5 (3.2 to 6.3 microns)

    Per API 598 standards ANSI 150 Shell (by Water) -425psig ANSI 150 Seat (by Water) -303psig

    (by Air) - 80psig ANSI 300 Shell (by Water) -1100psig ANSI 300 Seat (by Water) -792psig

    (by Air) - 80psig

    2

    1234567891011

    BODYBONNETSTEMDISCGLAND FLANGEGLAND PACKINGHANDWHEELBODY/BONNET GASKETBODY/BONNET BOLTINGGLAND BOLT/NUTYOKE SLEEVE

    Stainless Steel ASTM A351 CF8MStainless Steel ASTM A351 CF8MAISI-316ASTM A351 CF8MASTM A351 CF8MPTFE (Option: Graphite)Ductile IronPTFE (Option: Graphite)ASTM A193 B8 /A194 Gr. 8ASTM A193 B8 /A194 Gr. 8Ductile Iron

    NO. PARTS NAME MATERIAL

    GA

    TE

    VA

    LV

    ES

    ANSI 150 & 300 CAST STAINLESS STEELCHECK VALVES

    E

    n-d

    L

    D

    AB

    C

    H

    5 8 2 4 7

    3 6 1

    E

    n-d

    AB

    C

    H

    L

    D

    5 8 2 4 7

    3 6 1

    7

    ANSI CLASS 150

    ANSI CLASS 300

    DIMENSIONS (mm)

    DIMENSIONS (mm)

    SIZEB

    60.570

    79.598.5120.5139.5152.5190.5216

    241.5298.5362432

    in1/23/41

    1 1/22

    2 1/2345681012

    mm15202540506580100125150200250300

    E15202540506580100125150200250300

    H63667585110135135170170210250315376

    L108117127165203216241292330356495622698

    A8998108127152178190229254279343406483

    C3543517392105127157186216270324381

    D11.211.211.214.315.917.519.123.923.925.428.630.231.8

    n-d4-164-164-164-164-194-194-198-198-228-228-2212-2512-25

    ANSI-150

    SIZEB

    66.582.589

    114.5127149168200235270330

    387.5451

    in1/23/41

    1 1/22

    2 1/2345681012

    mm15202540506580100125150200250300

    E15202540506580100125150200250300

    H8090100116129143164177217231291319360

    L152178216241267292318356400444533622711

    A95117124156165190210254279318381444521

    C3543517392105127157186216270324381

    D14.315.917.520.722.325.428.631.835

    36.641.347.750.8

    n-d4-164-194-194-228-198-228-228-228-2212-2212-2516-2916-32

    ANSI-300

    Fig EAS-306

    Fig EAS-315

  • ANSI 150 & 300 CAST STAINLESS STEELCHECK VALVES

    PARTS AND MATERIAL

    DESCRIPTION

    DESIGN STANDARDS

    TEST PRESSURE

    Raised Face flanged ends to ANSI Class 150and ANSI Class 300. Swing type disc, integralbody seat, bolted cover.Size range: ANSI 150 - 15mm through 300mm.

    ANSI 300 - 15mm through 300mm

    Design - ASME B16.34 Shell Wall Thickness -

    ASME B16.34 Pressure /Temperature Rating -

    ASME B16.34 Face to Face Dimension -

    ASME B16.10 Flange Dimension - ASME B16.5 Flange Gasket Facing -

    ASME B16.5 (3.2 to 6.3 microns)

    Per API 598 standards ANSI 150 Shell (by Water) -425psig ANSI 150 Seat (by Water) -303psig

    (by Air) - 80psig ANSI 300 Shell (by Water) -1100psig ANSI 300 Seat (by Water) -792psig

    (by Air) - 80psig

    6

    12345678

    BODYCOVERDISCDISC NUTBODY/COVER BOLTINGARMBODY/COVER GASKETHINGE PIN

    Stainless Steel ASTM A351 CF8MStainless Steel ASTM A351 CF8MASTM A351 CF8MSS 316ASTM A193 B8 /A194 Gr. 8ASTM A351 CF8MPTFE (Option: Graphite)SS 316

    NO. PARTS NAME MATERIAL

    CH

    EC

    K V

    AL

    VE

    S

    ANSI 150 & 300 CAST STAINLESS STEELGATE VALVES

    A B C

    DL

    n-d

    E

    H

    W

    (OPE

    N)

    7

    11

    10

    5

    6

    3

    9

    2

    8

    1

    4

    A

    (OPE

    N)

    B CH

    n-d

    D

    E

    W

    7

    11

    10

    5

    6

    3

    9

    2

    8

    1

    4

    L

    3

    ANSI CLASS 150

    ANSI CLASS 300

    SIZEA8998108117127152178190229254279343406483533597

    in1/23/41

    1 1/41 1/2

    22 1/2

    3456810121416

    mm1520253240506580100125150200250300350400

    E1520253240506580100125150200250300350400

    H1902002302702803203904155106007109001117132414801658

    W9090100140140160180200225250290330350400550600

    L108117127140165178190203229254267292330356381406

    B60.570

    79.589

    98.5120.5139.5152.5190.5216

    241.5298.5362432

    476.5539.7

    C354351647392105127157186216270324381413470

    D11.211.211.214.314.315.917.519.123.923.925.428.630.231.835

    36.6

    n-d4-164-164-164-164-164-194-194-198-198-228-228-2212-2512-2512-2916-29

    ANSI-150

    DIMENSIONS (mm)

    SIZEA95117124156165190210254279318381444521

    in1/23/41

    1 1/22

    2 1/2345681012

    mm15202540506580100125150200250300

    E15202540506580100125150200250300

    H16018021028033039045452563973993311381338

    W100120140160180200224250250300350400500

    L140152165190216241283305381403419457502

    B66.582.589

    114.5127149168200235270330

    387.5451

    C3543517392105127157186216270324381

    D14.315.917.520.722.325.428.631.835

    36.641.347.750.8

    n-d4-164-194-194-228-198-228-228-228-2212-2212-2516-2916-32

    ANSI-300

    DIMENSIONS (mm)

    Fig EAS-105

    Fig EAS-115

  • ANSI 150 & 300 CAST STAINLESS STEELGLOBE VALVES

    ANSI 150 & 300 CAST STAINLESS STEELGLOBE VALVES

    PARTS AND MATERIAL

    DESCRIPTION

    DESIGN STANDARDS

    TEST PRESSURE

    Raised Face flanged ends to ANSI Class 150and ANSI Class 300. Integral T-head stem,swivel disc, self-a