apf tp - whats new

Download APF TP - Whats New

If you can't read please download the document

Upload: houssemeddine-ezzina

Post on 10-Dec-2015

220 views

Category:

Documents


2 download

DESCRIPTION

description for APF

TRANSCRIPT

SIMATIC

APF TP V1.4 fr SIMATIC PCS 7 V 8.0 Update 1

Revision: R00

Please read these notes carefully. They contain important information on using the APF.

When printing the file, make sure that the left and right margins are set to a width of 25 millimeters (1 inch) for A4 portrait size.

Notes on Usage (Release Notes) from V7.1.3.0_1.2.0.2 up to V8.0.0.1_1.4.0.0The following changes are contained in the APF TP V8.0.0.1_1.4.0.0:

Description of change WinCC-Faceplates / Flow ChartsSequencer:Bugfix: Problems concerning operability of next / back buttons in the FB_SEQ_OP picture solvedBugfix: Problems concerning displaying operation units after creating new operations in the FB_SEQ_OP picture solvedSeveral Faceplates:Bugfix: Adjusted Check-Box and Radio-Box objects in the following pictures:@PG_FB_PLMA3_STANDARD.pdl@PG_FB_PLM_A_STANDARD.pdl@PG_FB_PIPEA_LIMITS.pdl@PG_FB_TANKA_LIMITS.pdl@PG_FB_TANKA_MAINTENANCE.pdl@PG_FB_TANKA_PROCESS.pdl@PG_FB_TANKA_BATCH.pdl@PG_FB_PIPEA_BATCH.pdl@PG_FB_TANKA_PARAMETERS.pdl@PG_FB_PIPEA_MAINTENANCE.pdl@PG_FB_PIPEA_STANDARDS.pdl@PG_FB_TANKA_STANDARDS.pdl@PG_FB_SEQ_O_MAINTENANCE.pdl@PG_FB_SEQ_M_PARAMETERS.pdl@PG_FB_SEQ_M_OVERVIEW.pdl

Description of change AS-function blocksFB_MAT_A:Bugfix: Problems concerning "AREA" name in messages solvedFB_TANKA:Bugfix: If cleaning / sterilization ends with status READY instead of READY_OK, the status machine switches to CIP_REQ / STER_REQ instead of CLEANEDFB_PIPEA:Bugfix: If cleaning / sterilization ends with status READY instead of READY_OK, the status machine switches to CIP_REQ / STER_REQ instead of CLEANEDFB_PLM_P:Change: Interface changed due to connected APF blocks -> AS STOP necessaryFB_SEQ_M:Change: Interface changed due to connected APF blocks -> AS STOP necessary

Description of change IntegratorBugfix: Integrator deleted information in FB_Configuration.ini file (error only in APF TP V7.1.2.0_1.2.0.2)Bugfix: Integrator always copied pictures FB_SEQ_OP.pdl and FB_SEQ_PROG.pdl into the project even if the CIP sequencer module was not used in the projectThe following changes are contained in the APF TP V7.1.2.0_1.2.0.2:

Description of change WinCC-Faceplates / Flow ChartsSequencer:Bugfix: Problems concerning displaying minutes in the FB_SEQ_O faceplate solvedBugfix: Problems concerning displaying operation units in the FB_SEQ_OP picture solvedBugfix: In the FB_SEQ_M faceplate the batch id was not displayed correctlyBugfix: In the FB_SEQ_M faceplate problems with displaying process values solvedBugfix: In the FB_SEQ_M faceplate problems with displaying the message box solvedBugfix: Problems solved in the FB_SEQ_M faceplate concerning selection released / locked sequence typesBugfix: Starting / creating and releasing a program with 0 steps isn't possible anymoreBugfix: FB_SEQ_PROG.pdl: message box can not be closedPLM:Bugfix: Problems concerning authorization levels in the faceplates solvedBugfix: Problems concerning tag connections in the faceplates solvedBugfix: Problems concerning update in the follow up tank window solvedBugfix: Problems concerning the selection of jobs solvedBugfix: Problems concerning update in the source and destination tanks solvedBugfix: During an active job the following changes weren't locked: first source, first destination and recipe / parameter setBugfix: Errors concerning releases of buttons solvedTankmanager:Bugfix: In the tank faceplate the batch id was not displayed correctlyBugfix: Some dummy texts were visible in the faceplateBugfix: In the tank faceplate the parameter set name can be set from the user archive instead of the function blockPipemanager:Bugfix: In the pipe faceplate the batch id was not displayed correctlyBugfix: Problems with the green background for active timers in the status view solvedBugfix: Some dummy texts were visible in the faceplateMaterial compatibility:Bugfix: The 40 comboboxes in the picture FB_MAT_COMP.pdl were limited to 40 materialsBugfix: Visual improvements in the picture FB_MAT_COMP.pdlBugfix: Correction of authorization level in the picture FB_MAT_COMP.pdl (level 3 user was able to see compatibilities)

Description of change AS-function blocksGeneral:Bugfix: The name of the blocks, sources and charts folders in the APF_TP_Lib are in germanFB_SEQ_M:Bugfix: Wrong display of runtime in the last stepBugfix: Outputs QUB017 - QUB128 and QHRUB017 - QHRUB128 wrongBugfix: SFCx_REL input were not usedFB_SEQ_O:Bugfix: FB_SEQ_M plausibility error causes monitoring error on FB_SEQ_O blockBugfix: no puls of output QMSBOACKTBugfix: Problems concerning monitoring error solvedFB_TANKA:Bugfix: no error message for QERR and QGR_ERR was setBugfix: behaviour concerning batch name in alarm messages solvedBugfix: Problems with CIP / non CIP procedure releases solvedFB_PIPEA:Bugfix: some behaviours concerning status machine fixedBugfix: behaviour concerning batch name in alarm messages solvedBugfix: Problems with CIP / non CIP procedure releases solvedFB_PLM_P:Bugfix: wrong REC_ID in alarm messageBugfix: sometimes the parameter set in the first row will not be updatedFB_PLM_A / FB_PLMA3:Bugfix: problems caused by changing batch data solvedBugfix: checking tank IDs faultyBugfix: stability of connection to FB_PLM_P improvedBugfix: problems with texts in alarm messaged solvedBugfix: problems with plc error after downloading PLM FB solvedFB_MAT_A:Bugfix: Not defined materials leads to "incompatible" instead of "error"

Description of change EngineeringtoolsGeneral:Bugfix: Propblems with triggers of C actions are correctedSequencer:Bugfix: problems concerning visibility window of program groups when using more than 128 program groupsBugfix: error during creation of FB_SEQ_OP_UNIT archive (REC_ID > 128)Bugfix: problems with updating combobox "procedures" solved

Description of change EngineeringtoolsBugfix: several typing mistakes corrected

Description of change picture objects (UDOs),iInstallation , global actionsBugfix: Propblems with displaying figures and texts solved