“mpp” air driven double diaphragm pumps1 mpp double diaphragm pumps simple operation double...

USER FRIENDLY BUILD TO LAST

“MPP” air drivendouble diaphragm pumps

1 MPP

DOUBLE DIAPHRAGM PUMPS

SIMPLE OPERATIONDouble diaphragm pumps are operated by compressed air orany non-flammable compressed gas. The pumping strokebegins as air is delivered by the air distribution system, puttingpressure on one diaphragm and then the opposite diaphragm.The two diaphragms are linked together by a common rod.The pumping stroke on one side is simultaneously the suctionstroke on the opposing diaphragm alternately drawing fluid inone side while discharging fluid from the other side.

MAIN CHARACTERISTICSSelf-priming.Non-electrical.Runs dry without damage.Variable flow rate.Pumping fluids which contain particles.Reduced solvent flash-off.Adequate to pump high viscosity liquids.

TYPICAL APPLICATIONTransfer and recirculation of acid, alkali, ink, solvent, paint,enamel, resin, glue liquids, slurry, used in such industries as:chemical, pharmaceutical, ceramic, lather tanning, textile,metallurgical, paper, civil construction, alimentary.

ARGAL PUMPS ADVANTAGES

Quality built lube free, air operated diaphragm pumps.Wide range of pump types and sizes (1/4”÷3”).Standard NPT or BSP connections available on request.Will not stall at slow speeds.100% tested prior to shipment.Simple modular design.Dual manifold capability for 3/8"-1/2"-1" models.Parts interchangeable between models and sizes.Large solids handling through the Max-Pass valve system 3/8"-1/2"-1" pumps.

PERFORMANCE ENGINEERED

No stallouts:stallout due to freezing in the air system is virtually eliminateddue to the insulating quality of all plastic construction plus theability to slow air expansion and velocity without compromisingperformance. Stalling due to low speed is prevented by twopilot air ducts in the distributor which supply a constant airpressure against the air valve spool throughout the dischargestroke preventing the spool/shuttle combination to stop in aneutral position (Fig. 1).

Lube Free Operationachieved by using dissimilar plastic materials within the airsystem, shuttle mechanism constructed of lubrication filledmaterials and surface finishes held to strict engineering tole-rances.

All plastic air systems:in both metallic and plastic pumps prevent destruction of airsystem components from corrosive atmospheres or diaphragmruptures. No brass or aluminium components are used withinthe air system.All air system are glass filled polypropylene

No vent holes:the are no vent hole in our air valve. Vent holes needed toprevent stalling in competitive pumps allow corrosive fumes toenter and destroy valuable components. Additionally, if adiaphragm ruptures, fluid leakage cannot be routed to a safecontained zone.

No air lost when fluid discharge line are closed:air system seals and prevents air consumption when pump isnot transferring fluid; low coefficient of friction between the airsystem component translates in reduced air consumption.

MPP 2

The Max-Pass valve is ideal for inks, paints, adhesives, slurriesand other specialized applications.

Larger inner volumes:than competitive models with comparable performances,means more capacity per stroke and less wear on movingparts.

High viscosity applications:up to 22000 centipoises on all pumps from 3/8” to 3”. Up to4000 centipoises on 1/4” models.

Patented valve system:Max Pass™, optional valve sy-stem tolerates large solids andallows installation of the pumpin any position.• Increases solids handling ca-pability by 300% and suction liftby 25%.• Abrasion resistant.• Available in Nitrile, EPDM,Viton®.

3 MPP

DIAPRAGAMS CONSTRUCTION MATERIALS

Thermoplastic diaphragms:offer superior chemical and abrasion resistance and increased life cycle.The wide range of applications that these materials can address also makeordering the correct pump much easier.

Diaphragm are executed in materials as various as Geolast®, Santoprene®,PTFE, Viton®.Geolast®, is a nitrile based thermoplastic elastomer used in place of nitrile(Buna-N) or neoprene and urethane for non aggressive water based applications.Santoprene® is an EPDM based thermoplastic elastomer and is resistant tomild acids.Geolast®, Santoprene® are registered trademarks of Advanced ElastomerSystem

Elastomeric diaphragms:Viton® is a fluorinated elastomer with a broad resistance to most aggressivechemicals.Viton® is a registered trademarks of DuPont Dow Elastomers

Fluorinated diaphragms:PTFE is a synthetic fluoropolymer resistant to all chemicals.Superior PTFE overlay design does not require reduced diaphragm rod stroke,which reduces pump capacity by 20% on competitive pumps.Back-up diaphragms for PTFE overlays are Santoprene® which offers achemically resistant as “second line of defence”.

Process control:Solenoid control and cycle counting optional for most pumps.

CE and ATEX compliance:CE safety of Machineries and Quality Control certification have been obtainedfor all models.Argal is an ISO 9001:2000 certified company.All models are adequate to operate in Atex areas classified as Cat 3, Zone 2The metal pumps model 1 1/2" & 2" metal may comply to Atex Cat 2, Zone1 on request.The pump of 1" and smaller size constructed in metal and conductive nyloncomply to Atex Cat 2, Zone 1.

As you can see from the diagram above, as viscosities increase, the capacityof the pump decreases.Do not exceed 22000 centapoise on all 3/8" up to 3" pumps. Do not exceed4000 centapoise on 1/4" model.

80%

80%

60%

40%

20%

0

CENTAPOISE

CA

PA

CIT

Y

0 2 4 6 8 10 12 14 16 18 20 22

HIGH VISCOSITY APPLICATION

Valve spool

Pilot supplyair preventsstalling

Fig. 1

...our pumps do non require resetbuttons or magnets to insure.

121

184

162

41,5

AIR EXHAUST

60,5

4 x 9,5

Geolast®

Santoprene®

PTFEPTFEGeolast®

PTFEGeolast®

PTFESantoprene®

PTFEPTFEPTFEPTFEPTFEPTFEPTFEPTFEPTFE

PolypropylenePolypropylenePolypropyleneNylonNylonNylonNylonPVDFPVDF

TTTTTTTTT

WWWWWWNYNYNYNYFPFP

NitrileEPDMPTFEPTFENitrilePTFEGeolast®

PTFEEPDM

NETTNTGTE

PolypropylenePolypropylenePolypropyleneNylonNylonConductive NylonConductive NylonPVDFPVDF

WWWWWWNYNYCYCYFPFP

MPP 025 WW G T WW NMPP 025 WW S T WW EMPP 025 WW T T WW TMPP 025 NY T T NY TMPP 025 NY G T NY NMPP 025 CY T T NY TMPP 025 CY G T NY GMPP 025 FP T T FP TMPP 025 FP S T FP E

GSTTGTGTS

2,52,52,52,52,53,53,53,53,5

656565656565659090

MPP - 025 (1/4”) 4

194

135,5

AIR INLET

73

117

140

29

DISCHARGE

SUCTION

EXECUTIONS

PLASTIC

CHAMBERS DIAPHRAGMS VALVE/BALL VALVE SEATS O-Rings ARGAL CODE WEIGHTMAX T.°C

DIMENSIONS

DISCHARGE FLOW l/min.

PR

ES

SU

RE

INLE

T/O

UT

LET

(bar

)

6,8

5,4

4,1

2,7

1,3

0

1,7 3,4

5

6,5

AIR CONSUMPTION - Nm3/h

PERFORMANCE CURVES

0 4 8 12 16 18

MAIN CHARACTERISTICSMax CapacityVolume per strokeMax Air PressureMinimum Air PressureDry liftMaximun solidsInlet air supplyOutlet air supplyFluid Inlet/DischargeNote: Dual manifold inlet/outlet is an option.

l/minmlbarbarmmmBSP/NPT FBSP/NPT FBSP/NPT F

16,3236,81,351,61/4"1/4"1/4"

NY

WW

FP

CY

5 038 (3/8”) - MPP

217

DISCHARGE

122,5

182,5

98

27

61

SUCTION

EXHAUST

AIRINLET

168,5

103

107 3,8 x 2

Geolast®

Santoprene®

PTFEPTFESantoprene®®PTFEPTFEPTFEGeolast®

PTFE

PolypropylenePolypropylenePolypropylenePolypropylenePVDFPVDFPVDFConductive NylonConductive NylonConductive Nylon

Nitrile Max-Pass™EPDM Max-Pass™PTFEViton Max-Pass™EPDM Max-Pass™PTFEViton Max-Pass™PTFENitrile Max-Pass™Viton Max-Pass™

N/AN/APolypropyleneN/AN/APVDFN/AStainless SteelN/AN/A

MPP 038 WW G N 00 NMPP 038 WW S E 00 EMPP 038 WW T T WW TMPP 038 WW T V 00 VMPP 038 FP G E 00 EMPP 038 FP T T FP TMPP 038 FP T V 00 VMPP 038 CY T T SS TMPP 038 CY G N 00 NMPP 038 CY T V 00 V

WWWWWWWWFPFPFPCYCYCY

NETVETVTNV

0000

WW0000FP00SS0000

NitrileEPDMPTFEViton®

EPDMPTFEViton®

PTFENitrileViton®

GSTTGTTTGT

NETVETVTNV

CHAMBERS DIAPHRAGMS VALVE/BALL VALVE SEATS O-Rings ARGAL CODE WEIGHTMAX T.°C22222,52,52,52,52,52,5

65656565909090656565

EXECUTIONS

DIMENSIONS5

8,2

6,8

5,4

4,1

2,7

1,3

0 4 8 12 16 20 24 28 32 36

AIR CONSUMPTION - Nm3/h10 17


PR

ES

SU

RE

INLE

T/O

UT

LET

(bar

)

PERFORMANCE CURVES

MAIN CHARACTERISTICSMax CapacityVolume per strokeMax Air PressureMinimum Air PressureDry lift - with PTFE ballsDry lift - with Max-Pass™ valvesMaximun solidsMax solids - with Max-Pass™ valvesInlet air supplyOutlet air supplyFluid Inlet/DischargeNote: Dual manifold split/delivery is an option.

l/minmlbarbarmmmmmmBSP/NPT FBSP/NPT FBSP/NPT F

34458,21,335,21,66,41/4"3/8"3/8"

CY

WW

FP

MPP - 050 (1/2”) 6

AIREXHAUST

187

288,5

161,5

51

123,5

DISCHARGE

SUCTION

306

156

173

257

AIRINLET

276

138

212

198,5

DISCHARGE

INLET28,5

138

ø 7 x 4112

5682

AIREXHAUST

132

105

187

102

82

96,5

PLASTIC

METALLIC

Geolast®

Santoprene®

PTFEViton®

Geolast®

PTFEViton®

PTFEGeolast®

Viton®

PTFESantoprene®

Viton®

Geolast®

Santoprene®

PTFEViton®

Geolast®

Santoprene®

PTFEViton®

PolypropylenePolypropylenePolypropylenePolypropyleneNylonNylonNylonConductive NylonConductive NylonConductive NylonPVDFPVDFPVDFAluminumAluminumAluminumAluminum316 Stainless Steel316 Stainless Steel316 Stainless Steel316 Stainless Steel

Geolast®

Santoprene®

PTFEViton®

Geolast®

PTFEViton®

PTFEGeolast®

Viton®

PTFESantoprene®

Viton®

Geolast®

Santoprene®

PTFEViton®

Geolast®

Santoprene®

PTFEViton®

PolypropylenePolypropylenePolypropylenePolypropylenePVDFPVDFPVDFStainless SteelStainless SteelStainless SteelPVDFPVDFPVDFPolypropylenePolypropyleneNylonNylonStainless SteelStainless SteelStainless SteelStainless Steel

MPP 050 WW G G WW NMPP 050 WW S S WW EMPP 050 WW T T WW TMPP 050 WW V V WW VMPP 050 NY G G FC NMPP 050 NY T T FP TMPP 050 NY V V FP VMPP 050 CY T T SS TMPP 050 CY G G SS NMPP 050 CY V V SS VMPP 050 FP T T FP TMPP 050 FP S S FP EMPP 050 FP V V FP VMPP 050 AL G G WW NMPP 050 AL S S WW EMPP 050 AL T T NY TMPP 050 AL V V NY VMPP 050 SS G G SS NMPP 050 SS S S SS EMPP 050 SS T T SS TMPP 050 SS V V SS V

WWWWWWWWNYNYNYCYCYCYFPFPFPALALALALSSSSSSSS

GSTVGTVTGVTSVGSTVGSTV

WWWWWWWWFPFPFPSSSSSSFPFPFP

WWWWNYNYSSSSSSSS


NitrilePTFEViton®

PTFENitrileViton®

PTFEEPDMViton®



GSTVGTVTGVTSVGSTVGSTV

NETVNTVTNVTEVNETVNETV

CHAMBERS DIAPHRAGMS VALVE/BALL VALVE SEATS O-Rings ARGAL CODE WEIGHTMAX T.°C4,54,54,54,54,54,54,55,55,55,55,55,55,555559999

656565659090906565659090909090909090909090

EXECUTIONS

DIMENSIONS

8,2

6,8

5,4

4,1

2,7

1,3

0 8 16 24 32 40 48 56 64

AIR CONSUMPTION - Nm3/h3,5 1017 25


PR

ES

SU

RE

INLE

T/O

UT

LET

(bar

)

PERFORMANCE CURVES

MAIN CHARACTERISTICSMax CapacityVolume per strokeMax Air PressureMinimum Air PressureDry lift - with PTFE ballsDry lift - other balls checkDry lift - with Max-Pass™ valvesMaximun solidsMax solids - with Max-Pass™ valves(optional)Inlet air supplyOutlet air supplyFluid Inlet/DischargeNote: Dual manifold split/delivery is an option.

l/minmlbarbarmmmmmmm

BSP/NPT FBSP/NPT FBSP/NPT F

64,5958,21,334,563,29,5

1/4"3/8"1/2"

NY WW

CYFP

SSAL

DISCH.321,5

301,5

8,586

171,5

198

36,5

AIREXHAUST

438,5

217

303,5

240,5

AIRINLET

358

173

DISCHARGE

SUCTION

225,5

414,5

66

159

SUCTION

225,5120,5

33,5

120,5120,5

104,5

127

53

7 100 (1”) - MPP

Geolast®

Santoprene®

PTFEViton®

PTFESantoprene®

Viton®

Geolast®

Santoprene®

PTFEViton®

Geolast®

Santoprene®

PTFEViton®

PolypropylenePolypropylenePolypropylenePolypropylenePVDFPVDFPVDFAluminumAluminumAluminumAluminum316 Stainless Steel316 Stainless Steel316 Stainless Steel316 Stainless Steel

Geolast®

Santoprene®

PTFEViton®

PTFESantoprene®

Viton®

Geolast®

Santoprene®

PTFEViton®

Geolast®

Santoprene®

PTFEViton®

PolypropylenePolypropylenePolypropylenePolypropylenePVDFPVDFPVDFPolypropylenePolypropyleneNylonNylonStainless SteelStainless SteelStainless SteelStainless Steel

MPP 100 WW G G WW NMPP 100 WW S S WW EMPP 100 WW T T WW TMPP 100 WW V V WW VMPP 100 FP T T FP TMPP 100 FP S S FP EMPP 100 FP V V FP VMPP 100 AL G G WW NMPP 100 AL S S WW EMPP 100 AL T T NY TMPP 100 AL V V NY VMPP 100 SS G G SS NMPP 100 SS S S SS EMPP 100 SS T T SS TMPP 100 SS V V SS V

WWWWWWWWFPFPFPALALALALSSSSSSSS

GSTVTSVGSTVGSTV

WWWWWWWWFPFPFP

WWWWNYNYSSSSSSSS


PTFEEPDMViton®



GSTVTSVGSTVGSTV

NETVTEVNETVNETV

PLASTIC

METALLIC

CHAMBERS DIAPHRAGMS VALVE/BALL VALVE SEATS O-Rings ARGAL CODE WEIGHTMAX T.°C9,59,59,59,514141410,510,510,510,520,520,520,520,5

6565656590909,59,59,59,514141410,510,5

EXECUTIONS

DIMENSIONS

8,2

6,8

5,4

4,1

2,7

1,3

0 25 50 75 100 125 150 175

70

17

50

35 AIR CONSUMPTION - Nm3/h


PR

ES

SU

RE

INLE

T/O

UT

LET

(bar

)

PERFORMANCE CURVES

MAIN CHARACTERISTICSMax CapacityVolume per strokeMax Air PressureMinimum Air PressureDry lift - with PTFE ballsDry lift - other balls checkDry lift - with Max-Pass™ valvesMaximun solidsMax solids - with Max-Pass™ valvesoptional for plastic pumpsMax solids - with Max-Pass™ valvesoptional for metal pumpsInlet air supplyOutlet air supplyFluid Inlet/Discharge plastic pumpsFluid Inlet/Discharge metal pumpsNote for plastic pumps:BSP 1" threaded connections are availableOptional threaded center ports must be specified

l/minmlbarbarmmmmmmm

mm

BSP/NPT FBSP/NPT FFlanged NDBSP/NPT F

1553158,21,334,55,56,519

12,7

1/4"3/8"251"

SS

WWFP

AL

MPP - 150 (1 1/2”) 8

Geolast®

PTFESantoprene®

PTFESantoprene®

Geolast®

Santoprene®

PTFEGeolast®

Santoprene®

PTFE

PolypropylenePolypropylenePolypropylenePVDFPVDFAluminumAluminumAluminum316 Stainless Steel316 Stainless Steel316 Stainless Steel

Geolast®

PTFESantoprene®

PTFESantoprene®

Geolast®

Santoprene®

PTFEGeolast®

Santoprene®

PTFE

PolypropylenePolypropylenePolypropylenePVDFPVDFPolypropylenePolypropyleneNylonStainless SteelStainless SteelStainless Steel

MPP 150 WW G G WW NMPP 150 WW T T WW TMPP 150 WW S S WW EMPP 150 FP T T FP TMPP 150 FP S S FP EMPP 150 AL G G WW NMPP 150 AL S S WW EMPP 150 AL T T NY TMPP 150 SS G G SS NMPP 150 SS S S SS EMPP 150 SS T T SS T

WWWWWWFPFPALALALSSSSSS

GTSTSGSTGST

WWWWWWFPFP

WWWWNYSSSSSS

NitrilePTFEEPDMPTFEEPDMNitrileEPDMPTFENitrileEPDMPTFE

GTSTSGSTGST

NTETENETNET

CHAMBERS DIAPHRAGMS VALVE/BALL VALVE SEATS O-Rings ARGAL CODE WEIGHTMAX T.°C6565659090909090909090

212121303027,527,527,5606060

EXECUTIONS

DISCHARGE

522,5

480

553

312,5

79

ø 14 x 4237

284

SUCTION

AIRINLET

310

289

178

203

AIREXHAUST

AIRINLET

DISCHARGE

AIREXHAUST

SUCTION

495 302

324

127

152,5

527

590,5

316,5

81

ø 14 x 4236,5

283

PLASTIC

METALLIC

DIMENSIONS

8,2

6,8

5,4

4,1

2,7

1,3

0 70 140 210 280 350 420 490

AIR CONSUMPTION - Nm3/h6085 120


PR

ES

SU

RE

INLE

T/O

UT

LET

(bar

)

PERFORMANCE CURVES

MAIN CHARACTERISTICSMax CapacityVolume per strokeMax Air PressureMinimum Air PressureDry lift - with PTFE ballsDry lift - other balls checkMaximun solidsInlet air supplyOutlet air supplyFluid Inlet/DischargeNote:Flanges are ISO and ANSI 1 1/2” compatible.

l/minlbarbarmmmmBSP/NPT FBSP/NPT FFlanged ND

4901,758,21,334,56,53/4"3/4"40

SS

WW

FP

AL

6565659090909090909090

22222231,531,5282828606060

9 200 (2”) - MPP

Geolast®

PTFESantoprene®

PTFESantoprene®

Geolast®

Santoprene®

PTFEGeolast®

Santoprene®

PTFE

PolypropylenePolypropylenePolypropylenePVDFPVDFAluminumAluminumAluminum316 Stainless Steel316 Stainless Steel316 Stainless Steel

Geolast®

PTFESantoprene®

PTFESantoprene®

Geolast®

Santoprene®

PTFEGeolast®

Santoprene®

PTFE

PolypropylenePolypropylenePolypropylenePVDFPVDFPolypropylenePolypropyleneNylonStainless SteelStainless SteelStainless Steel

MPP 200 WW G G WW NMPP 200 WW T T WW TMPP 200 WW S S WW EMPP 200 FP T T FP TMPP 200 FP S S FP EMPP 200 AL G G WW NMPP 200 AL S S WW EMPP 200 AL T T NY TMPP 200 SS G G SS NMPP 200 SS S S SS EMPP 200 SS T T SS T

WWWWWWFPFPALALALSSSSSS

GTSTSGSTGST

WWWWWWFPFP

WWWWNYSSSSSS

NitrilePTFEEPDMPTFEEPDMNitrileEPDMPTFENitrileEPDMPTFE

GTSTSGSTGST

NTETENETNET

DISCHARGE

522,5

600,5

677

357,5

89

ø 14 x 4305

355,5

SUCTION

AIRINLET

310

334

127

152,5

AIREXHAUST

AIRINLET

DISCHARGE

AIREXHAUST

SUCTION

A J

M

K

L

C

B

D

E

ø 14 x 4F

G

PLASTIC

METALLIC

DIMENSIONMODELSIZE (inlet/outlet) A B C D E F G J K L M2” Aluminium

NPT & BSP2” Stainless steel

NPT & BSPMetal optional flange

ND50 - 2” Flange

495

495

495

667

625,5

625,5

636

584

549

352

382,5

336,5

57

89

89

255,5

305

305

305

351,5

351,5

310

310

302

127

127

127

152,5

152,5

152,5

327,5

358

324


EXECUTIONS

DIMENSIONS

8,2

6,8

5,4

4,1

2,7

1,3

AIR CONSUMPTION - Nm3/h50

85

0 70 140 210 280 350 420 490 560 630 685

120


PR

ES

SU

RE

INLE

T/O

UT

LET

(bar

)

PERFORMANCE CURVES

MAIN CHARACTERISTICSMax CapacityVolume per strokeMax Air PressureMinimum Air PressureDry lift - with PTFE ballsDry lift - other balls checkMaximun solidsInlet air supplyOutlet air supplyFluid Inlet/Discharge plastic pumpsFluid Inlet/Discharge metal pumpsNote for plastic pumps:Flanges are ISO and ANSI 2” compatible.Note for stainless steel pumps: Optional tri-clamp fittings

l/minlbarbarmmmmBSP/NPT FBSP/NPT FFlanged NDBSP/NPT F

6801,828,21,334,56,53/4"3/4"502"

SS

WW FP

AL

MPP - 300 (3”) 10

90909090

59595959

UrethaneSantoprene®

PTFEViton®

AluminumAluminumAluminumAluminum

Geolast®

Santoprene®

PTFEViton®

NitrileEPDMNylonViton®

MPP 300 AL U G N0 0MPP 300 AL S S E0 0MPP 300 AL T T NY TMPP 300 AL V V V0 0

ALALALAL

GSTV

N0E0NYV0

N/AN/APTFEN/A

USTV

00T0

DISCHARGE

819

SUCTION

622

761

AIRSUPPLY

408

61

ø 15,5 x 4258129

426

258

284


EXECUTIONS

DIMENSIONS

8,2

6,8

5,4

4,1

2,7

1,3

PR

ES

SU

RE

INLE

T/O

UT

LET

(bar

)

40

85

130 170215

255

AIR CONSUMPTION - Nm3/h


PERFORMANCE CURVES

0 100 200 300 400 500 600 700 800 900 1000

MAIN CHARACTERISTICSMax CapacityVolume per strokeMax Air PressureMinimum Air PressureDry lift - with PTFE ballsDry lift - other balls checkMaximun solidsInlet air supplyOutlet air supplyFluid Inlet/DischargeAccessories: Carry handles and strainer base

l/minlbarbarmmmmBSP/NPT FBSP/NPT FBSP/NPT F

9604,678,21,334,5113/4"3/4"3”

Cycle CountingThe cycle count valve is integral to the air valve. The sensorat the bottom of the air valve is provided (the configurationfor data acquisition and control is not provided).Every time a cycle is completed, an impulse is sent from thecycle count valve to a data acquisition center for automatedinput to a PC, PLC, relay or switch. The cycle count can beused on pumps 3/8" and larger.

Solenoid ControlThe solenoid control valve is used for remote, electricalcontrol of a pump through a PC, PLC, relay or switch.The solenoid control valve replaces the air valve as-sembly. The control signal is a solution to "on demand"fluid transfer requirements. Supply voltage: 220VAC/50Hz, 120V AC/60Hz, 24V DC. The solenoidcontrol can be used on pumps 3/8" and larger.

Drum KitsThe many advantages of diaphragmpumps make them ideal for drumevacuation.Drum mounting kits are available forpumps up to 1" in size.

ACCESSORIES

AL

0708

Member of AIBassociazioneindustrialebresciana

IT - 25125 BRESCIA - Via Labirinto, 159Tel. +39 030 3507011 - Fax +39 030 3507077

Export dpt. Tel. +39 030 3507033Web: www.argal.it - E-mail: [email protected]

It is the policy of ARGAL to always improve its products and the right is reserved to alter specifications at any time without prior notice.No part of this publication may be reproduced in any form or any means.

Production Program

ZGE range (ISO 2858)

Installed powers: kW 0,55÷300Bodies materials: PP - PVDF - PVC - PE HMW

• Sealed

ROUTE range

Installed powers: kW 0,55÷7,5Bodies materials: GFR/PP - CFF/E-CTFE

• Magnetic drive• Sealed

ZME range

Installed powers: kW 5,5÷15Bodies materials: PP - E-CTFE

• Sealed

FRONTIERA range

Installed powers: kW 0,55÷15Bodies materials: PP - E-CTFE

• Magnetic drive• Sealed

KGK range

Installed powers: kW 0,25÷15Bodies materials: GFR/PP - PVDF - PVC

Lenghts 250÷4000 mm

K range (KG and KM)

Installed powers: kW 0,75÷37Bodies materials: GFR/PP - PVDF - PVCLenghts 400÷3000 mm

ZMA and ZGA range

Installed powers: kW 0,75÷11Bodies materials: PP - PVDF - PVC

• Self priming• Sealed

AM range

Installed powers: kW 0,18÷0,55Bodies materials: GFR/PP - E-CTFE

• Magnetic drive

TMB range

Installed powers: W 15÷100Bodies materials: GFR/PP

• Magnetic drive

ZM range

Installed powers: kW 0,75÷11Bodies materials: GFR/PP - CFF/PVDF

• Sealed

LAGUNA range

Range: from 500 to 40.000 l/hFilter materials: PP - PVDFPump materials: GFR/PP - CFF/E-CTFE

EQUIPRO range

Available motor power: 0,25÷4 kWMaterial versions: GFR/PP – PVDF

Lenghts 275 - 450 mm

“mpp” air driven double diaphragm pumps1 mpp double diaphragm pumps simple operation double...

Documents