aodd pumps · aodd pumps air operated diaphragm pumps are a type of reciprocating diaphragm ... r...

1300 ALLPUMPS (255 786) www.allpumps.com.auCOMPLETE PACKAGED PUMP SOLUTIONS

1AO

DD P

UMPS

Air operated diaphragm pumps are a type of reciprocating diaphragm pump which contains two (2) diaphragms and is powered/ driven by compressed air.

Air operated diaphragm pumps are used in endless applications in mining, industrial and general plant service in any of the following applications:

1. Chemical transfer.2. De-watering underground mines particularly coal mines.3. Food/ Pharmaceutical manufacturing.4. Where the liquid being pumped has a high solids content or high viscosity.5. Where electricity isn't available or in explosive/ flammable environments.

Some of the myriad features and benefits exhibited by AODD pumps include:

Description

Features & BeneFits

typical applications &operation principle

tecHnical Data

aoDD pumps

• Can run dry indefinitely without damage

• Can be dead-headed without damage

• Low shear pumping action.

• Self-compensating design limits damage caused by misuse.

• No mechanical seal minimising damage leakage points.

• Rapid self-priming up to 7m.

• Variable speed.


22

Self-Priming• Portable

• High vacuum

• Run-dry capable

• No heat generation

Positive Suction Head• Preferred installation for high viscosity applications

• Flow-through capability

• Inlet pressure should be limited to 0.7 bar (10 psig) to maximise parts life

Submerged• Air-operated pumps (nonelectrical)

• Submersible option required

• Single-point exhaust options available

• Multiple material options available for process fluid compatibility

A= ExcEllEntB= Goodc= FAird= Poor

SolidS PASSAGE

ShEAr SEnSitivity

ABrASivES hAndlinG

SolidS hAndlinG

dry PriminG

viScouS FluidS hAndlinG

mAintEnAncE coStS

PUMP TYPE

AODD Pump A A A A A A A

Vane Pump D D D A B C C

Internal Gear Pump D D B B C A D

External Gear Pump D D D B C A D

Lobe Pump A C B C C A D

Centrifugal Pump D D B B C D B

Progressive Cavity Pump D C A B A A D

Piston/ Plunger Pump C D B C A A D

Why use an AODD Pump


3AO

DD P

UMPS

aoDD pumpsMArKetS ServeD

EnErGyWilden’s pumping solutions are leading the way in energy efficiency in storage terminals, biofuels and solar cell manufacturing. Wilden pumps play a vital role as transfer points from one mode of transportation to another and as safe, secure storage locations until product transfer is needed. Wilden is also committed to helping build a clean energy economy through the use of biofuels.

ProcESSWilden is a recognised leader in the process industries as you can find Wilden pumps in many of the top chemical, food and beverage and pharmaceutical plants around the world.

hyGiEnicWilden offers a wide range of hygienic and bio-pharmaceutical pumps for various food, beverage, dairy, personal care and pharmaceutical applications. When it comes to safety, performance and gentle transfer solutions, trust Wilden: the evolution of clean.

WAtEr / WAStEWAtErWilden plays a critical role in handling and transferring fluids used in municipal and industrial water and wastewater plants.

tyPicAl APPlicAtionS hAndlEd:

Raw crude oil Refined petroleum products

Chemicals Solvents

Caustics Solar cell manufacturing

Ethanol Petroleum

Biodiesel Lube oils

Gases Gasoline

Crude oil Diesel fuel


Acids Soap & detergents

Solvents Paints, inks & coatings

General chemicals Cosmetics

Pulp and paper Solvent-less coating

Low solvent coating Alcohols

Caustics


Personal care Pharmaceutical/biopharm

Confectionery Sauces, purees and beverages

Fruits and vegetables High purity product transfer

Poultry, fish and meat Solvent-less coating

Filling/batching Ingredient receiving/ unloading

Dairy


Wastewater systems Potable water systems

Rehabilitation systems Water treatment supply

Distribution Collection and disposal

Metal fabrication


44aoDD pumps

MAterIALS OF CONStrUCtION OPtIONS

mEtAl • Aluminium

• Cast Iron

• 316 Stainless Steel

• 316 Hastelloy “C”

PlAStic • Polypropylene

• PVDF

• PTFE

The liquids classified and listed below usually cannot be handled with Neoprene or Buna-N and will probably require Wil-FlexTM, Viton®, Nordel and/or Teflon®.

The Wilden range has the widest of pump materials of construction options available in the field of air operated diaphragm pumps.

tEmPErAturE limitS For PlASticS

Polypropylene 0° C to 79.4° C

Polyethylene 0° C to 70° C

PVDF (Kynar) -12.2° C to 107.2° C

Teflon PFA1 -28.9° C to 107.2° C

Acetal -28.9° C to 82.2° C

Nylon -17.8° C to93.3° C

1 -28.9° C to 148.9° C Ultrapure II and III models only.

Wetted/ Non-Wetted Materials

ElAStomErS

Wilden offer a range of diaphragms in their Ultra-flex program which guarantees longer life. The Ultra-Flex has a convolute shape, altered fabric placement which with unique hardware work together to decrease unit loading on the diaphragm and distribute stress. Material options include: Neoprene, Buna-N, EPDM, Viton.

Ultra-Flex Diaphragm technology.

Materials of Construction Options. The Wilden range has the widest of pump materials of construction options available in the field of air operated diaphragm pumps.

WETTED/ NON-WETTED MATERIALS Metal

Aluminium

Cast Iron

316 Stainless Steel

316 Hastelloy “C”

Plastic Polypropylene

PVDF

PTFE

TEMPERATURE LIMITS FOR PLASTICS Polypropylene 0° C to 79.4° C Polyethylene 0° C to 70° C PVDF (Kynar) -12.2° C to 107.2° C Teflon PFA1 -28.9° C to 107.2° C Acetal -28.9° C to 82.2° C Nylon -17.8° C to93.3° C 1 -28.9° C to 148.9° C Ultrapure II and III models only.

ELASTOMERS

RUBBER COMPOUNDS. Wilden pumps use a variety of rubber compounds manufactured specifically for use as elastomers. These compounds consist of natural rubber and man-made additives to increase the compounds’ resistance to specific types of fluids. Diaphragms made of these compounds are all reinforced with a nylon fabric mesh which lends dimensional stability and strength to the compound.

COMPOUND COLOUR CODE MOULD STAMP TEMPERATURE LIMITS SUITABLE APPLICATIONS

Neoprene Green NE -17.8° C to 93.3° C An excellent general purpose material for use in non-aggressive applications such as water based slurries, well water or sea water. Exhibits excellent flex life and low cost.

Buna-N Red BN -12.2° C to 82.2° C Excellent for applications involving petroleum/ oil- based fluids such as leaded gasolines, fuel oils, non-synthetic hydraulic oils, kerosene, turpentines and motor oils.

EPDM Blue ND -51.1° C to 137.8° C Excellent for use in applications requiring extremely cold temperatures. May also be used as a low cost alternative when pumping dilute acids or caustics.

Viton ® Silver VT -40.0° C to 76.7° C

Excellent for use in applications requiring extremely hot temperatures. May also be used with aggressive fluids such as aromatic or chlorinated hydrocarbons and highly aggressive acids. Teflon® would normally be used for these applications as its flex life is better than Viton® however, in applications requiring a suction lift outside the range of Teflon®, Viton® will be the preferred option.

THERMOPLASTIC COMPOUNDS.

Along with rubber compound elastomers, Wilden also use various thermoplastic elastomer compounds, listed below. These compounds are made entirely of man-made elements and are injection moulded to shape. They do not require reinforcing due to their inherent dimensional stability and tensile strength.

COMPOUND COLOUR CODE TEMPERATURE LIMITS SUITABLE APPLICATIONS

Polyurethane Clear -12.2° C to 65.6° C An excellent general purpose material for use in non-aggressive applications. Exhibits excellent flex life and durability. Wilden’s most economical diaphragm. Also available as part of the EZ-Instal flex profile diaphragm line.

Wil-Flex Orange -40° C to 107.2° C

Made of Santoprene, this material is an excellent low cost alternative to PTFE in many acidic and caustic applications such as sodium hydroxide, sulfuric or hydrochloric acids. Wil-Flex offers excellent abrasion resistance and durability at a cost comparable to Neoprene. Sanitary options include: full stroke length Integral Piston Diaphragms (IPD) and a sanitary material with a special profile allowing for an “easy install”.

Saniflex Cream -28.9° C to 104.4° C

Made of Hytrel, Saniflex diaphragms exhibit excellent abrasion resistance, flex life and durability. This material is FDA approved for food processing applications. This outstanding general purpose diaphragm is also available as part of the Ez-Instal Flex-profile line.

Geolast Red -40° C to 82° C Equivalent to Nitrile (Buna-N) Geolast is an injection moulded material that is an excellent choice for applications requiring enhanced oil resistance. This material exhibits exceptional performance for a variety of fluids.

PTFE ELASTOMERS.

Teflon PTFE is one of the most chemically inert man-made compounds known. Wilden engineers were the first to discover that by reinforcing a moulded Teflon PTFE diaphragm with concentric ribs they could control the flex pattern. The ribbed design extended the flex life 5 – 10 times longer than that of any other PTFE diaphragms. This mad the use of Teflon in diaphragm pumps cost effective, greatly expanding the range of applications where a diaphragm pump can be utilised. As it is not an elastic material, Teflon diaphragms require a rubber back-up diaphragm to provide flexibility and memory.


Teflon PTFE White -4.4° C to 104.4° C

Excellent choice when pumping highly aggressive fluids such as aromatic or chlorinated hydrocarbons, acids, caustics, ketones and acetates. Exhibits good flex life when compared to a standard rubber diaphragm pump. Wilden also offers PTFE integral piston diaphragms that offer superior product containment. The smooth contoured shape makes this an excellent choice for sanitary or ultra-pure applications.

ULTRA-FLEX DIAPHRAGM TECHNOLOGY.


Materials of Construction Options. The Wilden range has the widest of pump materials of construction options available in the field of air operated diaphragm pumps.

WETTED/ NON-WETTED MATERIALS Metal

Aluminium

Cast Iron

316 Stainless Steel

316 Hastelloy “C”

Plastic Polypropylene

PVDF

PTFE

TEMPERATURE LIMITS FOR PLASTICS Polypropylene 0° C to 79.4° C Polyethylene 0° C to 70° C PVDF (Kynar) -12.2° C to 107.2° C Teflon PFA1 -28.9° C to 107.2° C Acetal -28.9° C to 82.2° C Nylon -17.8° C to93.3° C 1 -28.9° C to 148.9° C Ultrapure II and III models only.

ELASTOMERS

RUBBER COMPOUNDS. Wilden pumps use a variety of rubber compounds manufactured specifically for use as elastomers. These compounds consist of natural rubber and man-made additives to increase the compounds’ resistance to specific types of fluids. Diaphragms made of these compounds are all reinforced with a nylon fabric mesh which lends dimensional stability and strength to the compound.

COMPOUND COLOUR CODE MOULD STAMP TEMPERATURE LIMITS SUITABLE APPLICATIONS

Neoprene Green NE -17.8° C to 93.3° C An excellent general purpose material for use in non-aggressive applications such as water based slurries, well water or sea water. Exhibits excellent flex life and low cost.

Buna-N Red BN -12.2° C to 82.2° C Excellent for applications involving petroleum/ oil- based fluids such as leaded gasolines, fuel oils, non-synthetic hydraulic oils, kerosene, turpentines and motor oils.

EPDM Blue ND -51.1° C to 137.8° C Excellent for use in applications requiring extremely cold temperatures. May also be used as a low cost alternative when pumping dilute acids or caustics.

Viton ® Silver VT -40.0° C to 76.7° C


THERMOPLASTIC COMPOUNDS.



Polyurethane Clear -12.2° C to 65.6° C An excellent general purpose material for use in non-aggressive applications. Exhibits excellent flex life and durability. Wilden’s most economical diaphragm. Also available as part of the EZ-Instal flex profile diaphragm line.





Geolast Red -40° C to 82° C Equivalent to Nitrile (Buna-N) Geolast is an injection moulded material that is an excellent choice for applications requiring enhanced oil resistance. This material exhibits exceptional performance for a variety of fluids.

PTFE ELASTOMERS.




Excellent choice when pumping highly aggressive fluids such as aromatic or chlorinated hydrocarbons, acids, caustics, ketones and acetates. Exhibits good flex life when compared to a standard rubber diaphragm pump. Wilden also offers PTFE integral piston diaphragms that offer superior product containment. The smooth contoured shape makes this an excellent choice for sanitary or ultra-pure applications.

ULTRA-FLEX DIAPHRAGM TECHNOLOGY.



5AO

DD P

UMPS



comPound colour codE

tEmPErAturE limitS SuitABlE APPlicAtionS

Polyurethane Clear -12.2° C to 65.6° C

An excellent general purpose material for use in non-aggressive applications. Exhibits excellent flex life and durability. Wilden’s most economical diaphragm. Also available as part of the EZ-Instal flex profile diaphragm line.





Geolast Red -40° C to 82° CEquivalent to Nitrile (Buna-N) Geolast is an injection moulded material that is an excellent choice for applications requiring enhanced oil resistance. This material exhibits exceptional performance for a variety of fluids.




Excellent choice when pumping highly aggressive fluids such as aromatic or chlorinated hydrocarbons, acids, caustics, ketones and acetates. Exhibits good flex life when compared to a standard rubber diaphragm pump.Wilden also offers PTFE integral piston diaphragms that offer superior product containment. The smooth contoured shape makes this an excellent choice for sanitary or ultra-pure applications.

tHerMOPLAStIC COMPOUNDS

PtFe eLAStOMerS

Wilden pumps use a variety of rubber compounds manufactured specifically for use as elastomers. These compounds consist of natural rubber and man-made additives to increase the compounds’ resistance to specific types of fluids. Diaphragms made of these compounds are all reinforced with a nylon fabric mesh which lends dimensional stability and strength to the compound.


mould StAmP


Neoprene Green NE -17.8° C to 93.3 °C

An excellent general purpose material for use in non-aggressive applications such as water based slurries, well water or sea water. Exhibits excellent flex life and low cost.

Buna-N Red BN -12.2° C to 82.2 °C

Excellent for applications involving petroleum/oil-based fluids such as leaded gasolines, fuel oils, non-synthetic hydraulic oils, kerosene, turpentines and motor oils.

EPDM Blue ND -51.1° C to 137.8 °C

Excellent for use in applications requiring extremely cold temperatures. May also be used as a low cost alternative when pumping dilute acids or caustics.

Viton® Silver VT -40.0° C to 76.7 °C


rUBBer COMPOUNDS

aoDD pumpsMAterIALS OF CONStrUCtION OPtIONS


66aoDD pumps

AIr DIStrIBUtION SYSteMS

mArkEt PoSition: FEAturES: APPlicAtion trAitS: AvAilABility:Variable control (discharge flow rates & air consumption)

Efficiency Management Sys-tem (EMSTM)

Maximise performance and efficiency 13mm(1/2")

Superior flow rate Metal and plastic material options Process applications 25mm(1")

Superior anti-freezing Non-stalling unbalanced spool Max.MeanTime 38mm(1-1/2")

Submersible options Simple and durable design Between Repair (MTBR) 51mm(2")

Lube-free operation 76mm(3")

ON/OFF reliability 102mm(4")

Most efficient flow rate per air consumption usage

ATEX models available

mArkEt PoSition: FEAturES: APPlicAtion trAitS:Cost efficient: 50% less expensive than an electronically actuated ADS

Simple and durable pump design Greater yield per SCFM of air used

Faster return on investment Simple components Wider application range

Robust design for harsh operating conditions Faster,easier setup time Repeatable,predictable performance

Metered air consumption for less product waste Plug-N-Play operation Less product waste

Creates the highest performance ratio No electricity needed Max Mean Time Between Repair (MTBR)

Superior flow rate Precise flow rate at start-up Increased application range/ compatibility

Superior anti-freezing Non-stalling unbalanced spool Minimum training required

Single-point exhaust options Drop-in configuration capabil-ity

No special skill set needed for mainte-nance or operations

Lube-free operation Reduced energy consumption

Reduced maintenance costs Lower carbon footprint

ON/OFF reliability ATEX-compatible for use in explosive atmospheres

Environmental sensitivity

mArkEt PoSition: FEAturES: APPlicAtion trAitS: AvAilABility:Anti-freezing Plastic center block Maximum reliability 6mm(1/4")

ON/OFF reliability Non-stalling unbalanced spool Process applications 13mm(1/2")

Longest-lasting wear parts Simple and durable design Max. Mean Time Between Repair (MTBR) 25mm (1")

Lube-free operation 38mm (1-1/2")

51mm (2")


7AO

DD P

UMPS

aoDD pumps

mArkEt PoSition: FEAturES: APPlicAtion trAitS: AvAilABility:Direct electrical interface Externally controlled System automation 6mm(1/4")

Superior ON/OFF reliability Various voltage options 4-20 mA pH Adjusting 13mm(1/2")

Reduced systems costs Nema 4, Nema 7 or ATEX Batching applications 25 mm (1")

Lube-free operation Simple installation OEM accounts

mArkEt PoSition: FEAturES: APPlicAtion trAitS: AvAilABility:

Low initial cost Metal air distribution system Utilitarian type applications 13mm (1/2")

Largest installed base Durable Robust design 25mm (1")

Proven technology Fewest replaceable parts Submersible 38mm (1-1/2")

Originated the AODDP industry Ease of maintenance Portable 51mm (2")

76mm (3")

SEriES oriGinAl AdvAncEd

mAtEriAl oF conStruction

PlAStic mEtAl PlAStic mEtAl

Size

1/4" ü ü ü ü ü1/2" ü ü ü ü ü ü1" ü ü ü ü ü ü ü ü ü ü ü1 1/2" ü ü ü ü ü ü ü ü ü ü ü2" ü ü ü ü ü ü ü ü ü ü ü3" ü ü ü ü ü ü ü4" ü ü ü

Turbo-Flo

Accu-Flo

Pro-Flo

Pro-Flo X

Pro-Flo S

Turbo-Flo

Accu-Flo

Pro-Flo

Pro-Flo X

Pro-Flo S

Turbo-Flo

Accu-Flo

Pro-Flo

Pro-Flo X

Pro-Flo S

Turbo-Flo

Accu-Flo

Pro-Flo

Pro-Flo X

Pro-Flo S

AIr DIStrIBUtION SYSteMS


88aoDD pumps

PrINCIPLeS OF OPerAtIONthings to think About When Selecting an Air-operated double-diaphragm Pump (AoddP)

Application

Air Distribution System (ADS)

Installation

Wetted Materials

Distributors

resources

• What application will the pump be used in? • What are you pumping?

• Do you need lube-free operation?

• Does the pump need to be submersible?

• What cleaning fluids would be used to clean the pump?

• What are your performance parameters (flowrates, air consumption, viscosities, suction lift)?

• Do you need a pulsation dampener?

• What ADS best suits your application needs?

• How reliable is the ADS?

• How efficient is the ADS?

• Do you need on/off reliability?

• Is the pump ADS ATEX approved?

• Does the ADS have anti-freezing technology?

• Does the ADS have integrated variable performance controls?

• Before installation please read the caution section of the pump manual.

• What are your piping considerations (valves, elbows, pipe friction losses, etc.)?

• Do you have sufficient air pressure and air volume for the pump?

• What is the MTBR (Mean Time Between Repair) of the AODDP?

• What are your installation parameters (self priming, positive suction head, high vacuum, heat generation, dry run capable, submersible, large solids passage, variable flow & pressure, shear sensitive)?

• Ease of maintenance: is the pump easy to clean, assemble/disassemble?

• What media will you be pumping?

• What is the chemical compatibility of the elastomer?

• What are the temperature limits of the wetted material and elastomer?

• How abrasive is the media being pumped?

• Do diaphragm configurations affect flow?

• Is your distributor local?

• Can the distributor fully support your fluid transfer needs?

• Are they a full-stocking, full-service distributor?

• How good is delivery? Is it less than 3 weeks?

• Is the distributor formally educated in specifying and maintaining your system?

• www.wildenpump.com

• Locating your Authorised Wilden Distributor: www.wildendistributor.com

• Everything you need to know about a Wilden pump: Pump Users Guide II (Consult the factory or your Wilden Distributor)

• Engineering & Operations Manuals: www.wildenpump.com in the Tech Info section

• Cavitation and Friction Guide & Safety Supplement: www.wildenpump.com in the Tech Info section

• Electronic Chemical Guide & Conversion Calculator: www.wildenpump.com in the Tech Info section


9AO

DD P

UMPS

aoDD pumpsSee How It WorksFigure 1.

Figure 2.

Figure 3.

Air supply is directed to the left air chamber behind diaphragm A. Diaphragm A is driven by compressed air away from the center section and toward the liquid chamber. The opposite diaphragm (diaphragm B) is pulled in by the common shaft. Diaphragm B is now on its suction stroke while diaphragm A is on its discharge stroke. The movement of diaphragm B toward the center block opens the bottom right check valve and closes the upper right check valve. This movement creates a vacuum within liquid chamber B. Atmospheric pressure forces fluid into the inlet manifold, past the lower right inlet check valve and into liquid chamber B. When the pressurized diaphragm A reaches its full stroke, the air distribution system redirects the air supply to the back side of diaphragm B.

The pressurized air forces diaphragm B away from the center block and the common shaft pulls diaphragm A toward the center section. The air chamber on side A, exhausts its air to atmosphere. Diaphragm B is now beginning its discharge stroke, while diaphragm A is beginning its suction stroke. The movement of diaphragm B toward the center block, opens the bottom right check valve and closes the upper right check valve. Diaphragm A creates a vacuum that begins to open the inlet check valve (lower left) and closes the discharge check valve (upper left).

These same hydraulic forces lift the discharge valve ball off its seat while the opposite discharge valve ball is forced onto its seat, forcing fluid to flow through the left side of the pump and out the discharge manifold. The movement of diaphragm A to the center block of the pump creates a vacuum within liquid chamber A. Atmospheric pressure forces fluid into the inlet manifold of the pump. The inlet valve ball is forced off its seat allowing the fluid to enter the right liquid chamber.

As the pump reaches its original starting point, each diaphragm has gone through one suction and one discharge stroke. This movement constitutes one pumping cycle. The pump will take several cycles to completely prime depending on the application variables.


1010

Features• ADS:Pro-Flo®, Pro-FloXTM, Accu-FloTM

• Anti-freezing technology

• Large solids passage

• Portable & Submersible

• Multiple liquid connections available

• Lube-free options

Performance Data• Max flow rates: 591 lpm (156gpm)

• Max suction lift: 9.5 m (31.0') Wet, 7.0 m (23.0') Dry • Max disp.per stroke:2.9L (0.77gal)

• Max discharge pressure: 8.6bar (125psig)

• Max size solids: 6.4mm (1/4")

tech Data• Sizes: 6mm (1/4") through 51mm (2")

• Materials: Polypropylene, PVDF, PFA

• Material Temperatures: Up to 107°C (225°F)

• Elastomers: Buna-N, Neoprene, EPDM, Viton®, Wil-FlexTM, SaniflexTM, Polyurethane, PTFE, Geolast®

Features• ADS: Pro-Flo® SHIFT, Pro-Flo®, Pro-Flo X™,

Accu-Flo™

• All metal bolted construction

• Higher flow rates

• Superior containment

• Anti-Freezing technology

• Portable & Submersible

• BSPT (NPT) or DIN (ANSI) liquid connections available

• Lube-free operation

Performance Data• Max flow rates: 1021 lpm (270 gpm)

• Max suction lift: 9.5 m (31.2') Wet, 7.6 m (25.0'), Dry

• Max disp. per stroke: 6.09 L (1.61 gal)

• Max discharge pressure: 221 bar (3200 psig)

• Max size solids: 76 mm (3")

tech Data• Sizes: 6 mm (1/4") through 76 mm (3")

• Materials: Aluminum, Ductile Iron, Stainless Steel, Alloy C

• Elastomer Temperatures: Up to 177°C (350°F)

• Elastomers: Buna-N, Neoprene, EPDM, Viton®, Wil-Flex™, Saniflex™, Polyurethane, PTFE , Geolast®

aoDD pumps

Original Series Pump

Advanced Series Pump


11AO

DD P

UMPS

aoDD pumpsPUMP DeSCrIPtION SYSteM

WILDEN PUMP & ENGINEERING, LLC 6 WIL-23000-Q-05 Price Book 1/08 – REPLACES WIL-23000-Q-04

NOTE: Not all combinations are available on all pump models. *Some models use a single piece CENTER SECTION that incorporates air chambers and the center block into one part.

ATEX

X = ATEX 100

AIR DISTRIBUTION SYSTEM

AxP = ACCU-FLO™ -PRO-FLO® BASEAxT = ACCU-FLO™ - TURBO-FLO™ BASEAxB = ACCU-FLO™ - BLOCK BASEH = HIGH PRESSUREHxS = HIGH PRESSURE - SIMPLEX TYPEP = PRO-FLO®

PV = PRO-FLO V™PX = PRO-FLO X™T = TURBO-FLO™UA = UNI-FLO™ A-SERIESUH = UNI-FLO™ H-SERIESUS = UNI-FLO™ S-SERIESUU = UNI-FLO™ U-SERIESUX = UNI-FLO™ X-SERIES

MODEL SIZE

025 = 6 mm (1/4")038 = 10 mm (3/8")050 = 13 mm (1/2")075 = 19 mm (3/4")1 = 13 mm (1/2")2 = 25 mm (1")3 = 32 mm (1-1/4")4 = 38 mm (1-1/2")8 = 51 mm (2")15 = 76 mm (3")20 = 102 mm (4")25 = 6 mm (1/4")38 = 10 mm (3/8")100 = 13 mm (1/2")200 = 25 mm (1")400 = 38 mm (1-1/2")800 = 51 mm (2")810 = 51 mm (2") TOP INLET1500 = 76 mm (3")1510 = 76 mm (3") TOP INLET

WETTED PARTS & OUTER PISTON

AA = ALUMINUM / ALUMINUMAM = ALUMINUM / MILD STEEL

AS = ALUMINUM / STAINLESS STEELAZ = ALUMINUM / NO OUTER PISTONDZ = CONDUCTIVE POLYETHYLENE /

NO OUTER PISTONEZ = POLYETHYLENE / NO OUTER PISTONFZ = CONDUCTIVE PTFE /

NO OUTER PISTONHH = ALLOY C / ALLOY CHZ = ALLOY C / NO OUTER PISTONKK = PVDF / PVDFKZ = PVDF / NO OUTER PISTONPP = POLYPROPYLENE /

POLYPROPYLENEPK = POLYPROPYLENE / PVDFPZ = POLYPROPYLENE /

NO OUTER PISTONTT = PTFE / PTFETZ = PTFE / NO OUTER PISTON

SS = STAINLESS STEEL / STAINLESS STEEL

SZ = STAINLESS STEEL / NO OUTER PISTON

WW = DUCTILE IRON / DUCTILE IRONWM = DUCTILE IRON / MILD STEELWS = CAST IRON / MILD STEELWZ = DUCTILE IRON / NO OUTER PISTON

AIR CHAMBER*

A = ALUMINUMC = PTFE COATED ALUMINUMM = MILD STEELN = NICKEL PLATED ALUMINUMP = POLYPROPYLENES = 316 STAINLESS STEELS = 316L STAINLESS STEELV = HALAR® COATED ALUMINUMW = DUCTILE IRON

CENTER BLOCK*

A = ALUMINUMC = PTFE COATED ALUMINUMM = MILD STEELN = NICKEL PLATED ALUMINUMP = POLYPROPYLENES = 316 STAINLESS STEELS = 316L STAINLESS STEEL

CENTER SECTION*

AA = ALUMINUMDD = CONDUCTIVE POLYETHYLENEEE = POLYETHYLENEFF = CONDUCTIVE PTFE

GG = CONDUCTIVE ACETAL

JJ = CONDUCTIVE POLYPROPYLENEKK = PVDFLL = ACETALPP = POLYPROPYLENETT = PTFEYY = NYLON

AIR VALVE

A = ALUMINUMB = BRASSC = PFA COATED BRASSD = BRASS W/OIL BOTTLEE = POLYETHYLENE

G = CONDUCTIVE ACETAL

J = CONDUCTIVE POLYPROPYLENEK = PVDFL = ACETALN = NICKEL PLATED BRASSP = POLYPROPYLENES = STAINLESS STEEL

DIAPHRAGMS

AWS = WIL-FLEX™, SOFT SHOREBNL = BUNA-N, IPD (Red Dot)BNS = BUNA-N (Red Dot)BNU = BUNA-N, ULTRA-FLEX™ (Red Dot)EPL = EPDM, IPD (Blue Dot)

EPS = EPDM (Blue Dot)EPU = EPDM, ULTRA-FLEX™ (Blue Dot)FBS = SANITARY BUNA-N

(Two Yellow Dots)FES = SANITARY EPDM (Two Blue Dots)FNS = SANITARY NEOPRENEFSS = SANIFLEX™ (Cream)FVS = SANITARY VITON® (Two White

Dots)FWS = SANITARY WIL-FLEX™LEL = PTFE EPDM BACKED, IPD

(White)LNL = PTFE NEOPRENE BACKED, IPD

(White)NES = NEOPRENE (Green Dot)NEU = NEOPRENE, ULTRA-FLEX™

(Green Dot)PEL = POLYETHYLENE, IPDPUS = POLYURETHANE (Clear)TEL = PTFE w/EPDM BACK-UP

O-RING, IPD (White)TEU = PTFE w/EPDM BACK-UP

(White)TFL = PTFE, IPD, NO BACK-UP

(White)THU = PTFE w/HIGH TEMP BUNA-N

BACK-UP (White)TNL = PTFE w/NEOPRENE BACK-UP

O-RING, IPD (White)TNU = PTFE w/NEOPRENE BACK-UP

(White)TSU = PTFE w/SANIFLEX™ BACK-UP

(White)TVL = PTFE w/VITON® BACK-UP

O-RING, IPD (White)TVU = PTFE w/VITON® BACK-UP

(White) VTS = VITON® (White Dot)VTU = VITON®, ULTRA-FLEX™

(White Dot)WFS = WIL-FLEX™ (Orange Dot)XBS = CONDUCTIVE BUNA-N (Two

Red Dots)XES = CONDUCTIVE EPDM (Two Blue

Dots)XNS = CONDUCTIVE NEOPRENE (Two

Green Dots)XVS = CONDUCTIVE VITON® (Two

White Dots)

VALVE BALLS

BN = BUNA-N (Red Dot)EP = EPDM (Blue Dot)FB = SANITARY BUNA-N (Two Yellow

Dots)FE = SANITARY EPDM (Two Blue Dots)FS = SANFLEX™ (Cream)FV = SANITARY VITON® (Two White

Dots)

FW = SANITARY WIL-FLEX™NE = NEOPRENE (Green Dot)PU = POLYURETHANE (Brown)TF = PTFE (White) SS = STAINLESS STEELVT = VITON® (White Dot)WF = WIL-FLEX™ (Orange Dot)

CHECK VALVES

CE = POLYETHYLENE CYLINDERCT = PTFE CYLINDER (White)SF = 304 STAINLESS STEEL FLAPSF = 316L STAINLESS STEEL FLAPTM = PTFE MUSHROOM (White)2F = 316L STAINLESS STEEL FLAP (2”)

VALVE SEAT

A = ALUMINUMBN = BUNA-N (Red Dot)D = CONDUCTIVE POLYETHYLENE

(Black)E = POLYETHYLENE (White)EP = EPDM (Blue Dot)F = CONDUCTIVE PTFE (Black)FS = SANIFLEX™ (Cream)G = CONDUCTIVE ACETAL (Black)H = ALLOY CK = PVDFM = MILD STEELNE = NEOPRENE (Green Dot)P = POLYPROPYLENEPU = POLYURETHANE (Brown)S = STAINLESS STEELS = 316L POLISHED STAINLESS

STEELT = PFA (White)T = PTFE (White)VT = VITON® (White Dot)WF = WIL-FLEX™ (Orange Dot)

VALVE SEAT AND/OR MANIFOLD O-RING

BN = BUNA-N (Red Dot)EP = EPDM (Blue Dot)FS = SANIFLEX™ (Cream)FS = FLUORO-SEAL™PU = POLYURETHANE (Brown)TF = PTFE (White)TV = PTFE ENCAPSULATED VITON®

WF = WIL-FLEX™ (Orange Dot)

FLANGE OR MANIFOLD GASKETS

EP = EPDM (Blue Dot)FB = SANITARY BUNA-N (Two Yellow

Dots)FE = SANITARY EPDM (Two Blue Dots)TF = PTFE (White)VT = VITON® (White Dot)

CURRENT GENERATION

PUMP DESCRIPTION SYSTEM

XX XXX / XXXXX / XXX / XX / XXX / XXXX

O-RINGS

MODEL VALVE SEAT

AIR DISTRIBUTIONSYSTEM

VALVE BALLS/CHECKS

DIAPHRAGMS

AIR VALVE

ATEX CENTER BLOCK OR CENTER SECTION

AIR CHAMBER OR CENTER SECTION

WETTED PARTS AND OUTER PISTON

SPECIALTYCODE

(if applicable)


1212

P25 Plastic

P25 Plastic

P.025 Plastic

P.025 Metal

P.025 Plastic

P.025 Metal

P.025 Plastic

P.025 Metal

aoDD pumps1/4" PUMPS

modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS00-9736 P.025/AMPPP/WFS/TF/ATF/0014 Aluminium Polypropylene Wilflex (Santoprene)

00-9735 P.025/AMPPP/BNS/TF/ABN/0014 Aluminium Polypropylene Buna (Nitrile)

00-9740 P.025/SZPPP/TNL/TF/STV/0014 Stainless Steel Polypropylene PTFE (Neoprene back up)

00-10064 P.025/SZPPP/EPS/TF/SBN/0014 Stainless Steel Polypropylene EPDM (Nordel)

modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS00-9604 P.025/KZPPP/TNL/TF/KTV PVDF (Kynar) Polypropylene PTFE (Neoprene back up)

00-9606 P.025/KKPPP/WFS/TF/KWF PVDF (Kynar) Polypropylene Wilflex (Santoprene)

00-9608 P.025/PPPPP/BNS/TF/PBN Polypropylene Polypropylene Buna (Nitrile)

00-9616 P.025/PZPPP/TNL/TF/PTV Polypropylene Polypropylene PTFE (Neoprene back up)

modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS00-10005 P25/PZPPP/TNL/TF/PTV/0014 Polypropylene Polypropylene PTFE (Neoprene back up)

00-10006 P25/KZPPP/TNL/TF/PTV/0014 PVDF (Kynar) Polypropylene PTFE (Neoprene back up)

itEmdimEnSion (mm)

A 165B 84C 148D 136E 13F 114G 92H 60J 6K 70L 47

itEmdimEnSion (mm)

A 145B 25C 94D 140E 163F 56G 30H 30J 114K 61L 74M 53N 64P Ø 5

itEmdimEnSion (mm)

A 173B 102C 25D 157E 127F 173G 61H 99J 53K 81L 10M 5N 150

P.025 MetAL PUMP- Original Series

P.025 PLAStIC PUMP- Original Series

P25 PLAStIC PUMP- Advanced Series

Models

Models

Models

Dimensions

Dimensions

Dimensions

Performance Curves - 6mm (1/4")



12

1[3.8]

2[7.6]

3[11.3]

4[15.1]

5[18.9]

(2) [3.4](3) [5.1]

(4) [6.8](5) [8.5]

(1) [1.7]

1[3.8]

2[7.6]

3[11.3]

4[15.1]

5[18.9]

(2) [3.4](3) [5.1]

(4) [6.8](5) [8.5]

(1) [1.7]

2[8]

4[15]

6[23]

8[30]

10[38]

12[45]

14[53]

16[61]

(8) [13.6]

(12) [20.4]

(4) [6.8]

2[8]

4[15]

6[23]

8[30]

10[38]

12[45]

14[53]

16[61]

(8) [13.6]

(12) [20.4]

(16) [27.2]

(4) [6.8]

2[8]

4[15]

6[23]

8[30]

10[38]

12[45]

14[53]

16[61]

(20) [34]

(5) [8]

(15) [25]

(10) [17]

2[8]

4[15]

6[23]

8[30]

10[38]

12[45]

14[53]

16[61]

(20) [34]

(5) [8]

(15) [25]

(10) [17]

2[8]

4[15]

6[23]

8[30]

10[38]

12[45]

14[53]

(8) [13.6]

(12) [20.4]

(16) [27.2]

(4) [6.8]

2[8]

4[15]

6[23]

8[30]

10[38]

12[45]

14[53]

(8) [13.6]

(12) [20.4]

(16) [27.2]

(4) [6.8]

METAL CURVESRUBBER PTFE

P.025 6 mm (1/4")METAL

P1 13 mm (1/2")METAL

PX1 13 mm (1/2")METAL

T1 13 mm (1/2")METAL

RUBBER PTFE

RUBBER PTFE

RUBBER PTFE

18

1[4]

2[8]

3[11]

4[14]

5[19]

(2) [3.4]

(3) [5.1]

(4) [6.8]

(5) [8.5]

(1) [1.7]

2[8]

4[15]

6[23]

8[30]

10[38]

12[45]

14[53]

(8) [13.6]

(12) [20.4]

(4) [6.8]

2[8]

4[15]

6[23]

8[30]

10[38]

12[45]

14[53]

(8) [13.6](12) [20.4]

(16) [27.2]

(4) [6.8]

1[4]

2[8]

3[11]

4[14]

5[19]

(2) [3.4](3) [5.1]

(4) [6.8]

(5) [8.5]

(1) [1.7]

PLASTIC CURVESRUBBER PTFE

P.025 6 mm (1/4")PLASTIC

P1 13 mm (1/2")PLASTIC

RUBBER PTFE

20

PLASTIC CURVES

RUBBER

RUBBER

PTFE

PTFE

PTFE

P25 6 mm (1/4") PLASTIC


P200 25 mm (1") PLASTIC

2[7.6]

4[15.1]

6[22.7]

8[30.3]

10[37.9]

12[45.4]

14[53.0]

16 [60.6]

(4) [6.8]

(12) [20.4]

(20) [34.0]

(16) [27.2]

(8) [13.6]

2[7.6]

4[15.1]

6[22.7]

8[30.3]

10[37.9]

12[45.4]

14[53.0]

16 [60.6]

(4) [6.8](8) [13.6] (12) [20.4]

(16) [27.2]

(20) [34.0]

10[38]

20[76]

30[114]

40[151]

50[189]

(10) [17](20) [34]

(30) [51]

(40) [58]

(50) [85]

10[38]

20[76]

30[114]

40[151]

50[189]

60[227]

(10) [17] (20) [34](30) [51]

(40) [68]

(50) [85]

N/A


13AO

DD P

UMPS


6 mm (1/4”)FNPT AIR

INLET

13 mm (1/2”) FNPT AIREXHAUST

S - P

OLY

& P

VDF

R - T

EFLO

N®&

GRA

PHIT

E

13 mm (1/2”) FNPT ULTRAPURE .615 I.D. [15.62]

.844 O.D. [21.44]

13 mm (1/2”) FNPT ULTRAPURE .615 I.D. [15.62]

.844 O.D. [21.44]

A

KL

M N

P

RS

B

C

D

E

F GJ

H

ModelsmodEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS01-0110 P1/PPPPP/WFS/WF/KWF Polypropylene Polypropylene Wilflex (Santoprene)

01-2654 P1/PPPPP/TNU/TF/KTV Polypropylene Polypropylene PTFE (Neoprene back up)

01-2655 P1/PPPPP/BNS/BN/KBN Polypropylene Polypropylene Buna (Nitrile)

01-2659 P1/KKPPP/TNU/TF/KTV PVDF (Kynar) Polypropylene PTFE (Neoprene back up)

01-10087 P1/KKPPP/WFS/WF/KWF PVDF (Kynar) Polypropylene Wilflex (Santoprene)

P1 13mm (1/2") PLAStIC PUMP

PlEASE notE: not all material options are listed. Please call 1300 ALL PUMPS to discuss your requirements.

itEmdimEnSion (mm)

A 31B 130C 196D 208E 218F 56G 114H 127J 203K 145L 114M 84N 102P 8R 20S 28

Dimensions Performance curves

18

1[4]

2[8]

3[11]

4[14]

5[19]

(2) [3.4]

(3) [5.1]

(4) [6.8]

(5) [8.5]

(1) [1.7]

2[8]

4[15]

6[23]

8[30]

10[38]

12[45]

14[53]

(8) [13.6]

(12) [20.4]

(4) [6.8]

2[8]

4[15]

6[23]

8[30]

10[38]

12[45]

14[53]

(8) [13.6](12) [20.4]

(16) [27.2]

(4) [6.8]

1[4]

2[8]

3[11]

4[14]

5[19]

(2) [3.4](3) [5.1]

(4) [6.8]

(5) [8.5]

(1) [1.7]




RUBBER PTFE

18

1[4]

2[8]

3[11]

4[14]

5[19]

(2) [3.4]

(3) [5.1]

(4) [6.8]

(5) [8.5]

(1) [1.7]

2[8]

4[15]

6[23]

8[30]

10[38]

12[45]

14[53]

(8) [13.6]

(12) [20.4]

(4) [6.8]

2[8]

4[15]

6[23]

8[30]

10[38]

12[45]

14[53]

(8) [13.6](12) [20.4]

(16) [27.2]

(4) [6.8]

1[4]

2[8]

3[11]

4[14]

5[19]

(2) [3.4](3) [5.1]

(4) [6.8]

(5) [8.5]

(1) [1.7]




RUBBER PTFE


1414aoDD pumps

1/2" PUMPS

Models

P100 13mm (1/2") PLAStIC PUMP

modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS01-10311 P100/PPPPP/BNS/B/PBN/0014 Polypropylene Polypropylene Buna (Nitrile)

01-10315 P100/PPPPP/TNU/TF/PTV/0014 Polypropylene Polypropylene PTFE (Neoprene back up)

01-10327 P100/KKPPP/WFS/WF/PWF/0014 PVDF (Kynar) Polypropylene Wilflex (Santoprene)

01-10323 P100/KKPPP/TNU/TF/PTV/0014 PVDF (Kynar) Polypropylene PTFE (Neoprene back up)

KL

N M

P

13 mm (1/2")FNPT DIS-

CHARGE

D

A

C

E

F

G

H

J

B

13 mm (1/2")FNPT INLET

13 mm (1/2")FNPT AIR EXHAUST

6 mm (1/4")FNPT AIR INLET

itEmdimEnSion (mm)

A 208B 28C 130D 198E 224F 41G 132H 221J 361K 132L 30M 137N 109P 84R 102S 8T 203U 142V 112

Dimensions

Models

PX1 13mm (1/2") MetAL PUMP

modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS01-10920 XPX1/AAAAA/BNS/BN/ABN/0014 Aluminium Aluminium Buna (Nitrile)

01-10916 XPX1/AAAAA/TNU/TF/ATV/0014 Aluminium Aluminium PTFE (Neoprene Back up)

01-10942 XPX1/SSAAA/FSS/FS/SFS/0014 Stainless Steel Aluminium Saniflex (Hytrel Food Grade)

01-10919 XPX1/SSAAA/TNU/TF/STV/0014 Stainless Steel Aluminium PTFE (Neoprene back up)

itEmdimEnSion (mm)

A 234B 51C 170D 254E 277F 25G 114H 201J 170K 145L 114M 102N 91P 8

Dimensions

12

1[3.8]

2[7.6]

3[11.3]

4[15.1]

5[18.9]

(2) [3.4](3) [5.1]

(4) [6.8](5) [8.5]

(1) [1.7]

1[3.8]

2[7.6]

3[11.3]

4[15.1]

5[18.9]

(2) [3.4](3) [5.1]

(4) [6.8](5) [8.5]

(1) [1.7]

2[8]

4[15]

6[23]

8[30]

10[38]

12[45]

14[53]

16[61]

(8) [13.6]

(12) [20.4]

(4) [6.8]

2[8]

4[15]

6[23]

8[30]

10[38]

12[45]

14[53]

16[61]

(8) [13.6]

(12) [20.4]

(16) [27.2]

(4) [6.8]

2[8]

4[15]

6[23]

8[30]

10[38]

12[45]

14[53]

16[61]

(20) [34]

(5) [8]

(15) [25]

(10) [17]

2[8]

4[15]

6[23]

8[30]

10[38]

12[45]

14[53]

16[61]

(20) [34]

(5) [8]

(15) [25]

(10) [17]

2[8]

4[15]

6[23]

8[30]

10[38]

12[45]

14[53]

(8) [13.6]

(12) [20.4]

(16) [27.2]

(4) [6.8]

2[8]

4[15]

6[23]

8[30]

10[38]

12[45]

14[53]

(8) [13.6]

(12) [20.4]

(16) [27.2]

(4) [6.8]


P.025 6 mm (1/4")METAL




RUBBER PTFE

RUBBER PTFE

RUBBER PTFE

12

1[3.8]

2[7.6]

3[11.3]

4[15.1]

5[18.9]

(2) [3.4](3) [5.1]

(4) [6.8](5) [8.5]

(1) [1.7]

1[3.8]

2[7.6]

3[11.3]

4[15.1]

5[18.9]

(2) [3.4](3) [5.1]

(4) [6.8](5) [8.5]

(1) [1.7]

2[8]

4[15]

6[23]

8[30]

10[38]

12[45]

14[53]

16[61]

(8) [13.6]

(12) [20.4]

(4) [6.8]

2[8]

4[15]

6[23]

8[30]

10[38]

12[45]

14[53]

16[61]

(8) [13.6]

(12) [20.4]

(16) [27.2]

(4) [6.8]

2[8]

4[15]

6[23]

8[30]

10[38]

12[45]

14[53]

16[61]

(20) [34]

(5) [8]

(15) [25]

(10) [17]

2[8]

4[15]

6[23]

8[30]

10[38]

12[45]

14[53]

16[61]

(20) [34]

(5) [8]

(15) [25]

(10) [17]

2[8]

4[15]

6[23]

8[30]

10[38]

12[45]

14[53]

(8) [13.6]

(12) [20.4]

(16) [27.2]

(4) [6.8]

2[8]

4[15]

6[23]

8[30]

10[38]

12[45]

14[53]

(8) [13.6]

(12) [20.4]

(16) [27.2]

(4) [6.8]


P.025 6 mm (1/4")METAL




RUBBER PTFE

RUBBER PTFE

RUBBER PTFE

Performance curves

Performance curves

20

PLASTIC CURVES

RUBBER

RUBBER

PTFE

PTFE

PTFE




2[7.6]

4[15.1]

6[22.7]

8[30.3]

10[37.9]

12[45.4]

14[53.0]

16 [60.6]

(4) [6.8]

(12) [20.4]

(20) [34.0]

(16) [27.2]

(8) [13.6]

2[7.6]

4[15.1]

6[22.7]

8[30.3]

10[37.9]

12[45.4]

14[53.0]

16 [60.6]

(4) [6.8](8) [13.6] (12) [20.4]

(16) [27.2]

(20) [34.0]

10[38]

20[76]

30[114]

40[151]

50[189]

(10) [17](20) [34]

(30) [51]

(40) [58]

(50) [85]

10[38]

20[76]

30[114]

40[151]

50[189]

60[227]

(10) [17] (20) [34](30) [51]

(40) [68]

(50) [85]

N/A

20

PLASTIC CURVES

RUBBER

RUBBER

PTFE

PTFE

PTFE




2[7.6]

4[15.1]

6[22.7]

8[30.3]

10[37.9]

12[45.4]

14[53.0]

16 [60.6]

(4) [6.8]

(12) [20.4]

(20) [34.0]

(16) [27.2]

(8) [13.6]

2[7.6]

4[15.1]

6[22.7]

8[30.3]

10[37.9]

12[45.4]

14[53.0]

16 [60.6]

(4) [6.8](8) [13.6] (12) [20.4]

(16) [27.2]

(20) [34.0]

10[38]

20[76]

30[114]

40[151]

50[189]

(10) [17](20) [34]

(30) [51]

(40) [58]

(50) [85]

10[38]

20[76]

30[114]

40[151]

50[189]

60[227]

(10) [17] (20) [34](30) [51]

(40) [68]

(50) [85]

N/A


15AO

DD P

UMPS

P2- 25mm (1”) Original Series Plastic Pump detail

Dimensions

ITEM DIMENSIONS (mm)

A 277 B 76 C 180 D 249 E 333 F 81 G 107 H 124 J 292 K 180 L 152 M 122 N 114 P 137 R 10

DIN S 84 DIA T 114 DIA U 15 DIA

ANSI S 79 DIA T 109 DIA U 15 DIA

MODELS

MODEL NUMBER DESIGNATION WETTED CONSTRUCTION

NON-WETTED CONSTRUCTION ELASTOMERS

02-6262 P2/PKPPP/BNS/BN/PBN/0400 Polypropylene Polypropylene Buna (Nitrile) 02-12277 P2/PKPPP/TWS/TF/PTV/0400 Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up) 02-6259 P2/KKPPP/WFS/WF/KWF/0400 PVDF (Kynar) Polypropylene Wilflex (Santoprene)

02-12484 P2/KKPPP/TWS/TF/KTV/0400 PVDF (Kynar) Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)

P200- 25mm (1”) Advanced Series Plastic Pump detail

Dimensions





MODELS



02-10560 P200/PKPPP/BNS/BN/PBN Polypropylene Polypropylene Buna (Nitrile) 02-12239 P200/PKPPP/TWS/TF/PTV Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up) 02-11269 P200/KKPPP/WFS/TF/KWF PVDF (Kynar) Polypropylene Wilflex (Santoprene) 02-12238 P200/KKPPP/TWS/TF/KTV PVDF (Kynar) Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)

P2- 25mm (1”) Original Series Plastic Pump detail

Dimensions





MODELS



02-6262 P2/PKPPP/BNS/BN/PBN/0400 Polypropylene Polypropylene Buna (Nitrile) 02-12277 P2/PKPPP/TWS/TF/PTV/0400 Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up) 02-6259 P2/KKPPP/WFS/WF/KWF/0400 PVDF (Kynar) Polypropylene Wilflex (Santoprene)



Dimensions





MODELS



02-10560 P200/PKPPP/BNS/BN/PBN Polypropylene Polypropylene Buna (Nitrile) 02-12239 P200/PKPPP/TWS/TF/PTV Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up) 02-11269 P200/KKPPP/WFS/TF/KWF PVDF (Kynar) Polypropylene Wilflex (Santoprene) 02-12238 P200/KKPPP/TWS/TF/KTV PVDF (Kynar) Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)

aoDD pumps1" PUMPS

modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS02-6262 P2/PKPPP/BNS/BN/PBN/0400 Polypropylene Polypropylene Buna (Nitrile)

02-12277 P2/PKPPP/TWS/TF/PTV/0400 Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)

02-6259 P2/KKPPP/WFS/WF/KWF/0400 PVDF (Kynar) Polypropylene Wilflex (Santoprene)


modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS02-10560 P200/PKPPP/BNS/BN/PBN Polypropylene Polypropylene Buna (Nitrile)

02-12239 P200/PKPPP/TWS/TF/PTV Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)

02-11269 P200/KKPPP/WFS/TF/KWF PVDF (Kynar) Polypropylene Wilflex (Santoprene)

02-12238 P200/KKPPP/TWS/TF/KTV PVDF (Kynar) Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)

itEmdimEnSion (mm)

A 277B 76C 180D 249E 333F 81G 107H 124J 292K 180L 152M 122N 114P 137R 10

DINS 84 DIAT 114 DIAU 15 DIA

ANSIS 79 DIAT 109 DIAU 15 DIA

itEmdimEnSion (mm)




P2-25mm PLAStIC PUMP - Original Series

P200-25mm PLAStIC PUMP- Advanced Series

Models

Models

Dimensions

Dimensions

Performance Curves

Performance Curves

5[19]

10[38]

15[57]

20[76]

25[95]

30[114]

35[133]

40[151]

(20) [34] (30) [51]

(40) [68]

(10) [17]

5[19]

10[38]

15[57]

20[76]

25[95]

30[114]

35[133]

40[151]

(20) [34](30) [51]

(40) [68]

(10) [17]

10[38]

20[76]

30[114]

40[151]

50[189]

60[227]

70[265]

80[303]

90[340]

(20) [34](30) [52]

(40) [68](50) [85]

(60) [102]

(10) [17]

10[38]

20[76]

30[114]

40[151]

50[189]

60[227]

70[265]

80[303]

90[340]

(20) [34](30) [52]

(40) [68](50) [85]

(60) [102]

(10) [17]

RUBBER PTFE

RUBBER PTFE

RUBBER PTFE

5[19]

10[38]

15[57]

20[76]

25[95]

30[114]

35[133]

40[151]

(20) [34] (30) [51]

(40) [68]

(10) [17]

5[19]

10[38]

15[57]

20[76]

25[95]

30[114]

35[133]

40[151]

(20) [34](30) [51]

(40) [68]

(10) [17]

10[38]

20[76]

30[114]

40[151]

50[189]

60[227]

70[265]

80[303]

90[340]

(20) [34](30) [52]

(40) [68](50) [85]

(60) [102]

(10) [17]

10[38]

20[76]

30[114]

40[151]

50[189]

60[227]

70[265]

80[303]

90[340]

(20) [34](30) [52]

(40) [68](50) [85]

(60) [102]

(10) [17]

RUBBER PTFE

RUBBER PTFE

RUBBER PTFE

RUBBER

RUBBER

PTFE

PTFE

PTFE

2[7.6]

4[15.1]

6[22.7]

8[30.3]

10[37.9]

12[45.4]

14[53.0]

16 [60.6]

(4) [6.8]

(12) [20.4]

(20) [34.0]

(16) [27.2]

(8) [13.6]

2[7.6]

4[15.1]

6[22.7]

8[30.3]

10[37.9]

12[45.4]

14[53.0]

16 [60.6]

(4) [6.8](8) [13.6] (12) [20.4]

(16) [27.2]

(20) [34.0]

10[38]

20[76]

30[114]

40[151]

50[189]

(10) [17](20) [34]

(30) [51]

(40) [58]

(50) [85]

10[38]

20[76]

30[114]

40[151]

50[189]

60[227]

(10) [17] (20) [34](30) [51]

(40) [68]

(50) [85]

RUBBER

RUBBER

PTFE

PTFE

PTFE

2[7.6]

4[15.1]

6[22.7]

8[30.3]

10[37.9]

12[45.4]

14[53.0]

16 [60.6]

(4) [6.8]

(12) [20.4]

(20) [34.0]

(16) [27.2]

(8) [13.6]

2[7.6]

4[15.1]

6[22.7]

8[30.3]

10[37.9]

12[45.4]

14[53.0]

16 [60.6]

(4) [6.8](8) [13.6] (12) [20.4]

(16) [27.2]

(20) [34.0]

10[38]

20[76]

30[114]

40[151]

50[189]

(10) [17](20) [34]

(30) [51]

(40) [58]

(50) [85]

10[38]

20[76]

30[114]

40[151]

50[189]

60[227]

(10) [17] (20) [34](30) [51]

(40) [68]

(50) [85]


1616

P2- 25mm (1”) Original Series Metal Pump detail

Dimensions


A 274 B 38 C 163 D 254 E 274 F 28 G 81 H 124 J 163 K 302 L 203 M 173 N 104 P 127 R 28 S 10

MODELS



02-12272 P2/AAPPP/BNS/BN/ABN/2014 Aluminium Polypropylene Buna (Nitrile) 02-12281 P2/AAPPP/TWS/TF/PTV/2014 Aluminium Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up) 02-12459 P2/SSPPP/VTS/VT/STF/2014 Stainless Steel Polypropylene Viton 02-12450 P2/SSPPP/TWS/TF/KTV/2014 Stainless Steel Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)

PX200- 25mm (1”) Advanced Series Metal Pump detail

Dimensions



MODELS



02-12002 XPX200/AAAAA/BNS/BN/ABN/0014 Aluminium Aluminium Buna (Nitrile) 02-12126 XPX200/AAAA/WFS/WF/AWF/0678 Aluminium Aluminium Wilflex (Santoprene) 02-12232 XPX200/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow with Wilflex/ Santoprene back up) 02-11808 XPX200/SSAAA/EPS/EP/SEP/0678 Stainless Steel Aluminium EPDM (Nordel)

P2- 25mm (1”) Original Series Metal Pump detail

Dimensions



MODELS



02-12272 P2/AAPPP/BNS/BN/ABN/2014 Aluminium Polypropylene Buna (Nitrile) 02-12281 P2/AAPPP/TWS/TF/PTV/2014 Aluminium Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up) 02-12459 P2/SSPPP/VTS/VT/STF/2014 Stainless Steel Polypropylene Viton 02-12450 P2/SSPPP/TWS/TF/KTV/2014 Stainless Steel Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)


Dimensions



MODELS



02-12002 XPX200/AAAAA/BNS/BN/ABN/0014 Aluminium Aluminium Buna (Nitrile) 02-12126 XPX200/AAAA/WFS/WF/AWF/0678 Aluminium Aluminium Wilflex (Santoprene) 02-12232 XPX200/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow with Wilflex/ Santoprene back up) 02-11808 XPX200/SSAAA/EPS/EP/SEP/0678 Stainless Steel Aluminium EPDM (Nordel)

aoDD pumps1" PUMPS

modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS02-12272 P2/AAPPP/BNS/BN/ABN/2014 Aluminium Polypropylene Buna (Nitrile)

02-12281 P2/AAPPP/TWS/TF/PTV/2014 Aluminium Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)

02-12459 P2/SSPPP/VTS/VT/STF/2014 Stainless Steel Polypropylene Viton

02-12450 P2/SSPPP/TWS/TF/KTV/2014 Stainless Steel Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)


02-12126 XPX200/AAAA/WFS/WF/AWF/0678 Aluminium Aluminium Wilflex (Santoprene)

02-12232 XPX200/SSAAA/TWS/TF/STF0014F Stainless Steel Aluminium PTFE (Full flow with Wilflex/ Santoprene back up)

02-11808 XPX200/SSAAA/EPS/EP/SEP/0678 Stainless Steel Aluminium EPDM (Nordel)

itEmdimEnSion (mm)


itEmdimEnSion (mm)


P2-25mm MetAL PUMP - Original Series

PX200-25mm MetAL PUMP- Advanced Series

Models

Models

Dimensions

Dimensions

Performance Curves Performance Curves

Performance Curves

RUBBER

RUBBER

RUBBER

RUBBER

PTFE

PTFE

PTFE

PTFE

WaterFlow Rates

8

7

6

5

4

3

2

1

0

300

200

250

150

100

50

0

120

100

80

60

40

20

0

(10) [17](20) [34]

(30) [52](40) [68]

(50) [85](60) [102]

GPM[LPM]

10[38]

30[114]

50[189]

70[265]

90[340]

BAR FEET PSIG

AIR CONSUMPTION(SCFM) [Nm3/h]

BAR FEET PSIG

8

7

6

5

4

3

2

1

0

300

200

250

150

100

50

0

120

100

80

60

40

20

0

(50) [85]

(30) [52](20) [34]

(10) [17]

(40) [68]

(60) [102]

WaterFlow Rates

GPM[LPM]

10[38]

30[114]

70[265]

50[189]

90[340]


RUBBER

RUBBER

RUBBER

RUBBER

PTFE

PTFE

PTFE

PTFE

WaterFlow Rates

8

7

6

5

4

3

2

1

0

300

200

250

150

100

50

0

120

100

80

60

40

20

0

(10) [17](20) [34]

(30) [52](40) [68]

(50) [85](60) [102]

GPM[LPM]

10[38]

30[114]

50[189]

70[265]

90[340]

BAR FEET PSIG


BAR FEET PSIG

8

7

6

5

4

3

2

1

0

300

200

250

150

100

50

0

120

100

80

60

40

20

0

(50) [85]

(30) [52](20) [34]

(10) [17]

(40) [68]

(60) [102]

WaterFlow Rates

GPM[LPM]

10[38]

30[114]

70[265]

50[189]

90[340]



17AO

DD P

UMPSPX4- 38mm (1 1/2”) Original Series Plastic Pump detail

Dimensions





MODELS



04-12354 PX4/PPAPP/BNS/BN/PBN Polypropylene Polypropylene Buna (Nitrile) 04-12185 PX4/PPAPP/WFS/WF/PTV Polypropylene Polypropylene Wilflex (Santoprene) 04-12189 PX4/KKAPP/WFS/WF/KTV PVDF (Kynar) Polypropylene Wilflex (Santoprene) 04-12602 PX4/KKPPP/TWS/TF/KTV PVDF (Kynar) Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)

PX400- 38mm (1 1/2”) Advanced Series Plastic Pump detail

Dimensions

MODELS



04-12753 PX400/PPPPP/BNS/BN/PBN Polypropylene Polypropylene Buna (Nitrile) 04-12822 PX400/PKPPP/TWS/TF/PTV Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up) 04-12183 PX400/KKPPP/WFS/WF/KWF PVDF (Kynar) Polypropylene Wilflex (Santoprene) 04-12604 PX400/KKPPP/TWS/TF/KTV PVDF (Kynar) Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)



DIN T 110 DIA U 150 DIA V 18 DIA

ANSI T 97 DIA U 127 DIA V 15 DIA

PX4- 38mm (1 1/2”) Original Series Plastic Pump detail

Dimensions





MODELS



04-12354 PX4/PPAPP/BNS/BN/PBN Polypropylene Polypropylene Buna (Nitrile) 04-12185 PX4/PPAPP/WFS/WF/PTV Polypropylene Polypropylene Wilflex (Santoprene) 04-12189 PX4/KKAPP/WFS/WF/KTV PVDF (Kynar) Polypropylene Wilflex (Santoprene) 04-12602 PX4/KKPPP/TWS/TF/KTV PVDF (Kynar) Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)

PX400- 38mm (1 1/2”) Advanced Series Plastic Pump detail

Dimensions

MODELS



04-12753 PX400/PPPPP/BNS/BN/PBN Polypropylene Polypropylene Buna (Nitrile) 04-12822 PX400/PKPPP/TWS/TF/PTV Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up) 04-12183 PX400/KKPPP/WFS/WF/KWF PVDF (Kynar) Polypropylene Wilflex (Santoprene) 04-12604 PX400/KKPPP/TWS/TF/KTV PVDF (Kynar) Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)






modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS04-12354 PX4/PPAPP/BNS/BN/PBN Polypropylene Polypropylene Buna (Nitrile)

04-12185 PX4/PPAPP/WFS/WF/PTV Polypropylene Polypropylene Wilflex (Santoprene)

04-12189 PX4/KKAPP/WFS/WF/KTV PVDF (Kynar) Polypropylene Wilflex (Santoprene)

04-12602 PX4/KKPPP/TWS/TF/KTV PVDF (Kynar) Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)

modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS04-12753 PX400/PPPPP/BNS/BN/PBN Polypropylene Polypropylene Buna (Nitrile)

04-12822 PX400/PKPPP/TWS/TF/PTV Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)

04-12183 PX400/KKPPP/WFS/WF/KWF PVDF (Kynar) Polypropylene Wilflex (Santoprene)


itEmdimEnSion (mm)




itEmdimEnSion (mm)


DINT 110 DIAU 150 DIAV 18 DIA

ANSIT 97 DIAU 127 DIAV 15 DIA

PX4-38mm (11/2”) PLAStIC PUMP - Original Series

PX400-38mm (11/2”) PLAStIC PUMP- Advanced Series

Models

Models

Dimensions

Dimensions

Performance Curves

Performance Curves

5[19]

10[38]

15[57]

20[76]

25[95]

30[114]

35[133]

40[151]

(20) [34] (30) [51]

(40) [68]

(10) [17]

5[19]

10[38]

15[57]

20[76]

25[95]

30[114]

35[133]

40[151]

(20) [34](30) [51]

(40) [68]

(10) [17]

10[38]

20[76]

30[114]

40[151]

50[189]

60[227]

70[265]

80[303]

90[340]

(20) [34](30) [52]

(40) [68](50) [85]

(60) [102]

(10) [17]

10[38]

20[76]

30[114]

40[151]

50[189]

60[227]

70[265]

80[303]

90[340]

(20) [34](30) [52]

(40) [68](50) [85]

(60) [102]

(10) [17]

RUBBER PTFE

RUBBER PTFE

RUBBER PTFE

5[19]

10[38]

15[57]

20[76]

25[95]

30[114]

35[133]

40[151]

(20) [34] (30) [51]

(40) [68]

(10) [17]

5[19]

10[38]

15[57]

20[76]

25[95]

30[114]

35[133]

40[151]

(20) [34](30) [51]

(40) [68]

(10) [17]

10[38]

20[76]

30[114]

40[151]

50[189]

60[227]

70[265]

80[303]

90[340]

(20) [34](30) [52]

(40) [68](50) [85]

(60) [102]

(10) [17]

10[38]

20[76]

30[114]

40[151]

50[189]

60[227]

70[265]

80[303]

90[340]

(20) [34](30) [52]

(40) [68](50) [85]

(60) [102]

(10) [17]

RUBBER PTFE

RUBBER PTFE

RUBBER PTFE

RUBBER

RUBBER

RUBBER

RUBBER

PTFE

PTFE

PTFE

PTFE

20[76]

60[227]

100[379]

140[530]

180[681]

(25) [43](50) [85]

(75) [128]

(100) [170]

(125) [213]

20[76]

60[227]

100[379]

140[530]

180[681]

(25) [43](50) [85]

(75) [128]

(100) [170]

(125) [213]

20[76]

60[227]

100[379]

140[530]

180[681]

(25) [43](50) [85]

(75) [128]

(100) [170]

(125) [213]

20[76]

60[227]

100[379]

140[530]

180[681]

(25) [43](50) [85]

(75) [128]

(100) [170]

(125) [213]

20[76]

40[151]

60[227]

80[303]

100[379]

120[454]

(20) [34](40) [88]

(80) [102](80) [136]

(100) [170]

20[76]

40[151]

60[227]

80[303]

100[379]

120[454]

(20) [34] (40) [88](80) [102]

(80) [136]

(100) [170]

RUBBER

RUBBER

RUBBER

RUBBER

PTFE

PTFE

PTFE

PTFE

20[76]

60[227]

100[379]

140[530]

180[681]

(25) [43](50) [85]

(75) [128]

(100) [170]

(125) [213]

20[76]

60[227]

100[379]

140[530]

180[681]

(25) [43](50) [85]

(75) [128]

(100) [170]

(125) [213]

20[76]

60[227]

100[379]

140[530]

180[681]

(25) [43](50) [85]

(75) [128]

(100) [170]

(125) [213]

20[76]

60[227]

100[379]

140[530]

180[681]

(25) [43](50) [85]

(75) [128]

(100) [170]

(125) [213]

20[76]

40[151]

60[227]

80[303]

100[379]

120[454]

(20) [34](40) [88]

(80) [102](80) [136]

(100) [170]

20[76]

40[151]

60[227]

80[303]

100[379]

120[454]

(20) [34] (40) [88](80) [102]

(80) [136]

(100) [170]


1818

PX4- 38mm (1 1/2”) Original Series Metal Pump detail

Dimensions


A 368 B 64 C 206 D 429 E 147 F 308 G 211 H 262 J 224 K 152 L 178 M 51 N 10 P 335 R 224 S 135 T 196 U 48 V 13

MODELS



04-12275 XPX4/AAAAA/BNS/BN/ABN/0014 Aluminium Aluminium Buna (Nitrile) 04-12446 XPX4/AAAAA/VTS/VT/VT/0014 Aluminium Aluminium Viton 04-12453 XPX4/WMAAA/EPS/EP/EP/0014 Cast Iron Aluminium EPDM (Nordel) 04-12594 XPX4/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow with Wilflex/ Santoprene back up)

PX400- 38mm (1 1/2”) Advanced Series Metal Pump detail

Dimensions

MODELS



04-12287 XPX400/AAAAA/BNS/BN/ABN Aluminium Aluminium Buna (Nitrile) 04-12472 XPX400/AAAA/EPS/EP/EP Aluminium Aluminium EPDM (Nordel) 04-12597 XPX400/SSAAA/TWS/TF/STF Stainless Steel Aluminium PTFE (Full flow with Wilflex/ Santoprene back up) 04-12687 XPX400/SSSSS/VTS/VT/STF Stainless Steel Stainless Steel Viton


A 343 B 79 C 320 D 531 E 594 F 122 G 81 H 312 J 292 K 244 L 206 M 152 N 170 P 10

DIN R 110 DIA S 150 DIA T 18 DIA

ANSI R 98 DIA S 127 DIA T 16 DIA

PX4- 38mm (1 1/2”) Original Series Metal Pump detail

Dimensions


A 368 B 64 C 206 D 429 E 147 F 308 G 211 H 262 J 224 K 152 L 178 M 51 N 10 P 335 R 224 S 135 T 196 U 48 V 13

MODELS



04-12275 XPX4/AAAAA/BNS/BN/ABN/0014 Aluminium Aluminium Buna (Nitrile) 04-12446 XPX4/AAAAA/VTS/VT/VT/0014 Aluminium Aluminium Viton 04-12453 XPX4/WMAAA/EPS/EP/EP/0014 Cast Iron Aluminium EPDM (Nordel) 04-12594 XPX4/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow with Wilflex/ Santoprene back up)

PX400- 38mm (1 1/2”) Advanced Series Metal Pump detail

Dimensions

MODELS



04-12287 XPX400/AAAAA/BNS/BN/ABN Aluminium Aluminium Buna (Nitrile) 04-12472 XPX400/AAAA/EPS/EP/EP Aluminium Aluminium EPDM (Nordel) 04-12597 XPX400/SSAAA/TWS/TF/STF Stainless Steel Aluminium PTFE (Full flow with Wilflex/ Santoprene back up) 04-12687 XPX400/SSSSS/VTS/VT/STF Stainless Steel Stainless Steel Viton


A 343 B 79 C 320 D 531 E 594 F 122 G 81 H 312 J 292 K 244 L 206 M 152 N 170 P 10

DIN R 110 DIA S 150 DIA T 18 DIA




04-12446 XPX4/AAAAA/VTS/VT/VT/0014 Aluminium Aluminium Viton

04-12453 XPX4/WMAAA/EPS/EP/EP/0014 Cast Iron Aluminium EPDM (Nordel)

04-12594 XPX4/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow with Wilflex/ Santoprene back up)

modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS04-12287 XPX400/AAAAA/BNS/BN/ABN Aluminium Aluminium Buna (Nitrile)

04-12472 XPX400/AAAA/EPS/EP/EP Aluminium Aluminium EPDM (Nordel)

04-12597 XPX400/SSAAA/TWS/TF/STF Stainless Steel Aluminium PTFE (Full flow with Wilflex/ Santoprene back up)

04-12687 XPX400/SSSSS/VTS/VT/STF Stainless Steel Stainless Steel Viton

itEmdimEnSion (mm)

A 368B 64C 206D 429E 147F 308G 211H 262J 224K 152L 178M 51N 10P 335R 224S 135T 196U 48V 13

itEmdimEnSion (mm)

A 343B 79C 320D 531E 594F 122G 81H 312J 292K 244L 206M 152N 170P 10

DINR 110 DIAS 150 DIAT 18 DIA

ANSIR 98 DIAS 127 DIAT 16 DIA

PX4-38mm (11/2”) MetAL PUMP - Original Series

PX400-38mm (11/2”) MetAL PUMP- Advanced Series

Models

Models

Dimensions

Dimensions

Performance Curves

Performance Curves

60 [102]

80 [136]

40 [68]

20 [34]

60 [102]

80 [136]

40 [68]

20 [34]

10[38]

20[76]

30[114]

40[151]

50[189]

60[227]

70[265]

80[303]

90[340]

(20) [34](30) [52]

(40) [68](50) [85]

(60) [102]

(10) [17]

10[38]

20[76]

30[114]

40[151]

50[189]

60[227]

70[265]

80[303]

90[340]

(20) [34](30) [52]

(40) [68](50) [85]

(60) [102]

(10) [17]

10[38]

20[76]

30[114]

40[151]

50[189]

60[227]

70[265]

80[303]

90[341]

(40) [68]

(60) [102]

(80) [136]

(100) [170]

(20) [34]

10[38]

20[76]

30[114]

40[151]

50[189]

60[227]

70[265]

80[303]

90[341]

(40) [68](60) [102]

(80) [136]

(100) [170]

(20) [34]

5[19]

10[38]

15[57]

20[76]

25[95]

30[114]

35[133]

(20) [34]

(5) [8.5]

(15) [25.5]

(25) [42.5]

(10) [17]

5[19]

10[38]

15[57]

20[76]

25[95]

30[114]

35[133]

(20) [34]

(5) [8.5]

(15) [25.5]

(25) [42.5]

(10) [17]

RUBBER PTFE

RUBBER PTFE

RUBBER PTFE

RUBBER PTFE

60 [102]

80 [136]

40 [68]

20 [34]

60 [102]

80 [136]

40 [68]

20 [34]

10[38]

20[76]

30[114]

40[151]

50[189]

60[227]

70[265]

80[303]

90[340]

(20) [34](30) [52]

(40) [68](50) [85]

(60) [102]

(10) [17]

10[38]

20[76]

30[114]

40[151]

50[189]

60[227]

70[265]

80[303]

90[340]

(20) [34](30) [52]

(40) [68](50) [85]

(60) [102]

(10) [17]

10[38]

20[76]

30[114]

40[151]

50[189]

60[227]

70[265]

80[303]

90[341]

(40) [68]

(60) [102]

(80) [136]

(100) [170]

(20) [34]

10[38]

20[76]

30[114]

40[151]

50[189]

60[227]

70[265]

80[303]

90[341]

(40) [68](60) [102]

(80) [136]

(100) [170]

(20) [34]

5[19]

10[38]

15[57]

20[76]

25[95]

30[114]

35[133]

(20) [34]

(5) [8.5]

(15) [25.5]

(25) [42.5]

(10) [17]

5[19]

10[38]

15[57]

20[76]

25[95]

30[114]

35[133]

(20) [34]

(5) [8.5]

(15) [25.5]

(25) [42.5]

(10) [17]

RUBBER PTFE

RUBBER PTFE

RUBBER PTFE

RUBBER PTFE

13

RUBBER

RUBBER

RUBBER

PTFE

PTFE

PTFE

60 [102]

100 [170]

80 [136]

40 [68]20 [34]

60 [102]

100 [170]

80 [136]

40 [68]

20 [34]

RUBBER PTFE

13

RUBBER

RUBBER

RUBBER

PTFE

PTFE

PTFE

60 [102]

100 [170]

80 [136]

40 [68]20 [34]

60 [102]

100 [170]

80 [136]

40 [68]

20 [34]

RUBBER PTFE


19AO

DD P

UMPS

PX8- 50mm (2”) Original Series Plastic Pump detail

Dimensions


A 490 B 76 C 414 D 693 E 770 F 89 G 417 H 333 J 381 K 307 L 227 M 254 N 15

DIN/ ANSI COMBO P 122 DIA R 155 DIA S 20 DIA

MODELS



08-13820 PX4/PPAPP/BNS/BN/PBN Polypropylene Polypropylene Buna (Nitrile) 08-14099 PX4/PPAPP/TWS/TF/PTV Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up) 08-13271 P8/KKAPP/VTU/TF/KTV PVDF (Kynar) Polypropylene Viton (Ultra flex)

PX800- 50mm (2”) Advanced Series Plastic Pump detail

Dimensions

MODELS



08-13629 PX800/PKPPP/WFS/WF/PWF Polypropylene Polypropylene Wilflex (Santoprene) 08-14101 PX800/PKPPP/TWS/TF/PTV Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up) 08-14355 PX800/KKPPP/WFS/WF/KWF PVDF (Kynar) Polypropylene EPDM (Nordel) 08-14100 PX800/KKPPP/TWS/TF/KTV PVDF (Kynar) Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)





20[76]

40[151]

60[227]

80[303]

100[378]

120[454]

140[530]

160[606]

(40) [68](60) [102]

(80) [136]

(100) [170]

(120) [204]

(20) [34]

20[76]

40[151]

60[227]

80[303]

100[378]

120[454]

140[530]

160[606]

(40) [68]

(60) [102]

(80) [136](100) [170]

(120) [204]

(20) [34]

RUBBER PTFE

RUBBER PTFE

20[76]

40[151]

60[227]

80[303]

100[378]

120[454]

140[530]

160[606]

(40) [68](60) [102]

(80) [136]

(100) [170]

(120) [204]

(20) [34]

20[76]

40[151]

60[227]

80[303]

100[378]

120[454]

140[530]

160[606]

(40) [68]

(60) [102]

(80) [136](100) [170]

(120) [204]

(20) [34]

RUBBER PTFE

RUBBER PTFE


Dimensions


A 490 B 76 C 414 D 693 E 770 F 89 G 417 H 333 J 381 K 307 L 227 M 254 N 15


MODELS





Dimensions

MODELS








aoDD pumps2" PUMPS

modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS08-13820 PX4/PPAPP/BNS/BN/PBN Polypropylene Polypropylene Buna (Nitrile)

08-14099 PX4/PPAPP/TWS/TF/PTV Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)

08-13271 P8/KKAPP/VTU/TF/KTV PVDF (Kynar) Polypropylene Viton (Ultra flex)

modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS08-13629 PX800/PKPPP/WFS/WF/PWF Polypropylene Polypropylene Wilflex (Santoprene)

08-14101 PX800/PKPPP/TWS/TF/PTV Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)

08-14355 PX800/KKPPP/WFS/WF/KWF PVDF (Kynar) Polypropylene EPDM (Nordel)


itEmdimEnSion (mm)

A 490B 76C 414D 693E 770F 89G 417H 333J 381K 307L 227M 254N 15DIN/ ANSI COMBOP 122 DIAR 155 DIAS 20 DIA

itEmdimEnSion (mm)



ANSIT 122 DIAU 154 DIAV 20 DIA

PX8-50mm (2”) PLAStIC PUMP - Original Series

PX800-50mm (2”) PLAStIC PUMP- Advanced Series

Models

Models

Dimensions

Dimensions

Performance Curves

Performance CurvesRUBBER PTFE

PTFE

60 [102]

80 [136]

100 [170]

40 [68]

20 [34]

60 [102]

80 [136]

100 [170]

40 [68]20 [34]

8

7

6

5

4

3

2

1

0

300

200

250

150

100

50

0

120

100

80

60

40

20

0

(50) [85](75) [128](100) [170](125) [213]

(25) [42]

20[76]

60[227]

100[379]

140[530]

180[681]

220[833]


RUBBER PTFE

PTFE

60 [102]

80 [136]

100 [170]

40 [68]

20 [34]

60 [102]

80 [136]

100 [170]

40 [68]20 [34]

8

7

6

5

4

3

2

1

0

300

200

250

150

100

50

0

120

100

80

60

40

20

0

(50) [85](75) [128](100) [170](125) [213]

(25) [42]

20[76]

60[227]

100[379]

140[530]

180[681]

220[833]



Dimensions


A 490 B 76 C 414 D 693 E 770 F 89 G 417 H 333 J 381 K 307 L 227 M 254 N 15


MODELS





Dimensions

MODELS









2020

PX8- 50mm (2”) Original Series Metal Pump detail

Dimensions


A 404 B 48 C 356 D 630 E 668 F 58 G 61 H 348 J 343 K 229 L 254 M 257 N 312 P 15 R 64 S 51 T 282 U 71 V 279 W 386 X 15 DIA

MODELS



08-13725 XPX8/AAAAA/NES/NE/NE/0014 Aluminium Aluminium Neoprene 08-13825 XPX8/AAAAA/VTS/VT/VT/0014 Aluminium Aluminium Viton 08-13837 XPX8/WWAAA/BNS/BN/BN/0014 Cast Iron Aluminium Buna (Nitrile) 08-14211 XPX8/SSSSS/FSS/FS/FS/0014 Stainless Steel Stainless Steel Saniflex (Hytrel Food grade)


Dimensions

MODELS



08-13775 XPX800/AAAAA/BNS/BN/ABN Aluminium Aluminium Buna (Nitrile) 08-14092 XPX800/AAAA/TWS/TF/STF Aluminium Aluminium PTFE (Full flow with Wilflex/ Santoprene back up) 08-14093 XPX800/SSAAA/TWS/TF/STF Stainless Steel Aluminium PTFE (Full flow with Wilflex/ Santoprene back up) 08-13756 XPX800/SSSSS/VTS/VT/STF Stainless Steel Stainless Steel Viton



DIN/ ANSI COMBO S 165 DIA T 122 DIA U 20 DIA


Dimensions



MODELS





Dimensions

MODELS







aoDD pumps2" PUMPS

modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS08-13725 XPX8/AAAAA/NES/NE/NE/0014 Aluminium Aluminium Neoprene

08-13825 XPX8/AAAAA/VTS/VT/VT/0014 Aluminium Aluminium Viton

08-13837 XPX8/WWAAA/BNS/BN/BN/0014 Cast Iron Aluminium Buna (Nitrile)

08-14211 XPX8/SSSSS/FSS/FS/FS/0014 Stainless Steel Stainless Steel Saniflex (Hytrel Food grade)

modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS08-13775 XPX800/AAAAA/BNS/BN/ABN Aluminium Aluminium Buna (Nitrile)

08-14092 XPX800/AAAA/TWS/TF/STF Aluminium Aluminium PTFE (Full flow with Wilflex/ Santoprene back up)

08-14093 XPX800/SSAAA/TWS/TF/STF Stainless Steel Aluminium PTFE (Full flow with Wilflex/ Santoprene back up)


itEmdimEnSion (mm)

A 404B 48C 356D 630E 668F 58G 61H 348J 343K 229L 254M 257N 312P 15R 64S 51T 282U 71V 279W 386X 15 DIA

itEmdimEnSion (mm)

A 439B 89C 396D 676E 760F 94G 117H 325J 493K 396L 330M 254N 325P 379R 15DIN/ ANSI COMBOS 165 DIAT 122 DIAU 20 DIA

PX8-50mm (2”) MetAL PUMP - Original Series

PX800- 50mm (2”) MetAL PUMP- Advanced Series

Models

Models

Dimensions

Dimensions

Performance Curves

Performance Curves

(20) [34](40) [68]

(60) [102]

(100) [170]

(120) [204]

(80) [136]

60 [102]

80 [136]

100 [170]

40 [68]20 [34]

60 [102]80 [136]

100 [170]

40 [68]20 [34]

RUBBER

RUBBER

RUBBER

RUBBER

PTFE

PTFE

PTFE

PTFE

(20) [34](40) [68]

(60) [102]

(100) [170]

(120) [204]

(80) [136]

60 [102]

80 [136]

100 [170]

40 [68]20 [34]

60 [102]80 [136]

100 [170]

40 [68]20 [34]

RUBBER

RUBBER

RUBBER

RUBBER

PTFE

PTFE

PTFE

PTFE

20[76]

40[151]

60[227]

80[303]

100[378]

120[454]

140[530]

160[606]

(40) [68](60) [102]

(80) [136]

(100) [170]

(20) [34]

20[76]

40[151]

60[227]

80[303]

100[378]

120[454]

140[530]

160[606]

(40) [68]

(60) [102]

(80) [136]

(100) [170]

(120) [204]

(20) [34]

20[76]

40[151]

60[227]

80[303]

100[379]

120[454]

140[530]

160[606]

180[681]

(40) [68](60) [102]

(80) [136]

(100) [170]

(20) [34]

20[76]

40[151]

60[227]

80[303]

100[379]

120[454]

140[530]

160[606]

180[681]

(40) [68](60) [102]

(80) [136](100) [170]

(20) [34]

10[38]

20[76]

30[114]

40[151]

50[189]

60[227]

70[265]

80[303]

90[340]

(20) [34]

(30) [52](40) [68]

(50) [85]

(60) [102]

(10) [17]

RUBBER

RUBBER PTFE

RUBBER PTFE

RUBBER PTFE

20[76]

40[151]

60[227]

80[303]

100[379]

120[454]

140[530]

160[606]

180[681]

200[681]

20[76]

40[151]

60[227]

80[303]

100[379]

120[454]

140[530]

160[606]

180[681]

200[681]

20[76]

40[151]

60[227]

80[303]

100[378]

120[454]

140[530]

160[606]

(40) [68](60) [102]

(80) [136]

(100) [170]

(20) [34]

20[76]

40[151]

60[227]

80[303]

100[378]

120[454]

140[530]

160[606]

(40) [68]

(60) [102]

(80) [136]

(100) [170]

(120) [204]

(20) [34]

20[76]

40[151]

60[227]

80[303]

100[379]

120[454]

140[530]

160[606]

180[681]

(40) [68](60) [102]

(80) [136]

(100) [170]

(20) [34]

20[76]

40[151]

60[227]

80[303]

100[379]

120[454]

140[530]

160[606]

180[681]

(40) [68](60) [102]

(80) [136](100) [170]

(20) [34]

10[38]

20[76]

30[114]

40[151]

50[189]

60[227]

70[265]

80[303]

90[340]

(20) [34]

(30) [52](40) [68]

(50) [85]

(60) [102]

(10) [17]

RUBBER

RUBBER PTFE

RUBBER PTFE

RUBBER PTFE

20[76]

40[151]

60[227]

80[303]

100[379]

120[454]

140[530]

160[606]

180[681]

200[681]

20[76]

40[151]

60[227]

80[303]

100[379]

120[454]

140[530]

160[606]

180[681]

200[681]


Dimensions



MODELS





Dimensions

MODELS








21AO

DD P

UMPS


Dimensions

MODELS



15-11462 PX1500/PSPPP/WFS/TF/KTV Polypropylene Polypropylene Wilflex (Santoprene) 15-12183 PX1500/PSPPP/TWS/TF/KTV Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)


A 914 B 160 C 691 D 1279 E 303 F 181 G 12 H 693 J 181 K 584 L 681 M 336 N 14 DIA P 149


aoDD pumps3" PUMPS

modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS15-11462 PX1500/PSPPP/WFS/TF/KTV Polypropylene Polypropylene Wilflex (Santoprene)

15-12183 PX1500/PSPPP/TWS/TF/KTV Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)

itEmdimEnSion (mm)

A 914B 160C 691D 1279E 303F 181G 12H 693J 181K 584L 681M 336N 14 DIAP 149

ANSIR 122 DIAS 154 DIAT 20 DIA

P1500-76mm (3”) PLAStIC PUMP- Advanced Series

Models

Dimensions Performance Curve


Dimensions

MODELS



15-11462 PX1500/PSPPP/WFS/TF/KTV Polypropylene Polypropylene Wilflex (Santoprene) 15-12183 PX1500/PSPPP/TWS/TF/KTV Polypropylene Polypropylene PTFE (Full flow with Wilflex/ Santoprene back up)


A 914 B 160 C 691 D 1279 E 303 F 181 G 12 H 693 J 181 K 584 L 681 M 336 N 14 DIA P 149


RUBBER PTFE

PTFE

60 [102]

80 [136]

100 [170]

40 [68]

20 [34]

60 [102]

80 [136]

100 [170]

40 [68]20 [34]

8

7

6

5

4

3

2

1

0

300

200

250

150

100

50

0

120

100

80

60

40

20

0

(50) [85](75) [128](100) [170](125) [213]

(25) [42]

20[76]

60[227]

100[379]

140[530]

180[681]

220[833]



2222


Dimensions


A 505 B 58 C 386 D 762 E 823 F 71 G 84 H 389 J 48 K 216 L 427 M 599 N 363 P 307 R 257 S 282 T 18 U 71 V 69 W 307 X 84 Y 305 Z 478

AA 15 DIA

MODELS



15-11800 XPX15/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile) 15-12014 XPX15/AAAAA/TWS/TF/ATF/0014 Aluminium Aluminium PTFE (Full flow with Wilflex Santoprene back up) 15-11838 XPX15/WWAAA/WFS/WF/WF/0014 Cast Iron Aluminium Wilflex (Santoprene) 15-11853 XPX15/SSAAA/FSS/FS/FS/0070 Stainless Steel Aluminium Saniflex (Hytrel Food grade)


Dimensions

MODELS



15-11801 XPX1500/AAAAA/WFS/WF/WF Aluminium Aluminium Wilflex (Santoprene) 15-12109 XPX1500/AAAA/TWS/TF/STF Aluminium Aluminium PTFE (Full flow with Wilflex/ Santoprene back up) 15-11846 XPX1500/SSAAA/TNU/TF/STF Stainless Steel Aluminium PTFE (Full flow with Neoprene back up) 15-11975 XPX1500/SSSSS/VTS/VT/STF Stainless Steel Stainless Steel Viton




aoDD pumps3" PUMPS

modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS15-11800 XPX15/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)

15-12014 XPX15/AAAAA/TWS/TF/ATF/0014 Aluminium Aluminium PTFE (Full flow with Wilflex Santoprene back up)

15-11838 XPX15/WWAAA/WFS/WF/WF/0014 Cast Iron Aluminium Wilflex (Santoprene)

15-11853 XPX15/SSAAA/FSS/FS/FS/0070 Stainless Steel Aluminium Saniflex (Hytrel Food grade)

modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS15-11801 XPX1500/AAAAA/WFS/WF/WF Aluminium Aluminium Wilflex (Santoprene)

15-12109 XPX1500/AAAA/TWS/TF/STF Aluminium Aluminium PTFE (Full flow with Wilflex/ Santoprene back up)

15-11846 XPX1500/SSAAA/TNU/TF/STF Stainless Steel Aluminium PTFE (Full flow with Neoprene back up)


itEmdimEnSion (mm)

A 505B 58C 386D 762E 823F 71G 84H 389J 48K 216L 427M 599N 363P 307R 257S 282T 18U 71V 69W 307X 84Y 305Z 478AA 15 DIA

itEmdimEnSion (mm)



PX15-76mm (3”) MetAL PUMP - Original Series

PX1500-76mm (3") MetAL PUMP- Advanced Series

Models

Models

Dimensions

Dimensions

Performance Curves

Performance Curves

15

RUBBER

RUBBER

RUBBER

PTFE

PTFE

PTFE

RUBBER PTFE

20[76]

40[151]

80[303]

120[454]

160[606]

220[833]

200[757]

60[227]

100[379]

140[530]

180[681]

240[908]

260[984]

(60) [102](90) [153]

(120) [204]

(30) [51]

20[76]

40[151]

80[303]

120[454]

160[606]

220[833]

200[757]

60[227]

100[379]

140[530]

180[681]

240[908]

260[984]

(60) [102]

(90) [153]

(120) [204]

(30) [51]

15

RUBBER

RUBBER

RUBBER

PTFE

PTFE

PTFE

RUBBER PTFE

20[76]

40[151]

80[303]

120[454]

160[606]

220[833]

200[757]

60[227]

100[379]

140[530]

180[681]

240[908]

260[984]

(60) [102](90) [153]

(120) [204]

(30) [51]

20[76]

40[151]

80[303]

120[454]

160[606]

220[833]

200[757]

60[227]

100[379]

140[530]

180[681]

240[908]

260[984]

(60) [102]

(90) [153]

(120) [204]

(30) [51]

15

40[151]

80[303]

120[454]

160[606]

200[757]

240[908]

(60) [102](90) [153]

(120) [204](150) [255]

(30) [51]

40[151]

80[303]

120[454]

160[606]

200[757]

240[908]

(60) [102](90) [153]

(120) [204](150) [255]

(30) [51]

20[76]

40[151]

60[227]

80[303]

100[378]

120[454]

140[530]

160[606]

(40) [68]

(60) [102]

(80) [136]

(100) [170]

(20) [34]

RUBBER

RUBBER PTFE

RUBBER PTFE

20[76]

40[151]

80[303]

120[454]

160[606]

220[833]

200[757]

60[227]

100[379]

140[530]

180[681]

240[908]

(60) [102]

(90) [153]

(120) [204]

(30) [51]

20[76]

40[151]

80[303]

120[454]

160[606]

220[833]

200[757]

60[227]

100[379]

140[530]

180[681]

240[908]

(60) [102](90) [153]

(120) [204]

(30) [51]

15

40[151]

80[303]

120[454]

160[606]

200[757]

240[908]

(60) [102](90) [153]

(120) [204](150) [255]

(30) [51]

40[151]

80[303]

120[454]

160[606]

200[757]

240[908]

(60) [102](90) [153]

(120) [204](150) [255]

(30) [51]

20[76]

40[151]

60[227]

80[303]

100[378]

120[454]

140[530]

160[606]

(40) [68]

(60) [102]

(80) [136]

(100) [170]

(20) [34]

RUBBER

RUBBER PTFE

RUBBER PTFE

20[76]

40[151]

80[303]

120[454]

160[606]

220[833]

200[757]

60[227]

100[379]

140[530]

180[681]

240[908]

(60) [102]

(90) [153]

(120) [204]

(30) [51]

20[76]

40[151]

80[303]

120[454]

160[606]

220[833]

200[757]

60[227]

100[379]

140[530]

180[681]

240[908]

(60) [102](90) [153]

(120) [204]

(30) [51]


Dimensions


A 505 B 58 C 386 D 762 E 823 F 71 G 84 H 389 J 48 K 216 L 427 M 599 N 363 P 307 R 257 S 282 T 18 U 71 V 69 W 307 X 84 Y 305 Z 478

AA 15 DIA

MODELS



15-11800 XPX15/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile) 15-12014 XPX15/AAAAA/TWS/TF/ATF/0014 Aluminium Aluminium PTFE (Full flow with Wilflex Santoprene back up) 15-11838 XPX15/WWAAA/WFS/WF/WF/0014 Cast Iron Aluminium Wilflex (Santoprene) 15-11853 XPX15/SSAAA/FSS/FS/FS/0070 Stainless Steel Aluminium Saniflex (Hytrel Food grade)


Dimensions

MODELS



15-11801 XPX1500/AAAAA/WFS/WF/WF Aluminium Aluminium Wilflex (Santoprene) 15-12109 XPX1500/AAAA/TWS/TF/STF Aluminium Aluminium PTFE (Full flow with Wilflex/ Santoprene back up) 15-11846 XPX1500/SSAAA/TNU/TF/STF Stainless Steel Aluminium PTFE (Full flow with Neoprene back up) 15-11975 XPX1500/SSSSS/VTS/VT/STF Stainless Steel Stainless Steel Viton





23AO

DD P

UMPS


Dimensions



ANSI COMBO S 15 DIA T 231 DIA U 191 DIA

MODELS



20-10055 PX20/WWAAA/NEU/PU/VVT Cast Iron Aluminium Neoprene (Ultra flex) 20-10063 XPX20/WWAAA/BNS/PU/PEP Cast Iron Aluminium Buna (Nitrile)

Optional Configurations

aoDD pumps4" PUMPS

modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS20-10055 PX20/WWAAA/NEU/PU/VVT Cast Iron Aluminium Neoprene (Ultra flex)

20-10063 XPX20/WWAAA/BNS/PU/PEP Cast Iron Aluminium Buna (Nitrile)

itEmdimEnSion (mm)


ANSI COMBOS 15 DIAT 231 DIAU 191 DIA

PX20-100mm (4”) MetAL PUMP- Advanced Series

Models

Optional Configurations

Dimensions Performance Curve

40[151]

80[303]

120[454]

160[606]

200[757]

240[908]

280[1060]

320[1211]

(60)[102](90)[153]

(120)[204]

(150)[255]

(30)[51]

40[151]

80[303]

120[454]

160[606]

200[757]

240[908]

(50) [85](75) [128]

(100) [170](125) [213]

(25) [43]

RUBBER

RUBBER


2424aoDD pumps

PrOFLO INtrO

Pro-Flo ShiFt modEl

inlEt/ diSchArGEmAx diSchArGE PrESSurE

mAx SolidS SizE

mAx Suction liFt mAx FloW

PS4 Original Series 38 mm (1-1/2")/32 mm (1-1/4") 8.6 bar (125 psig) 4.8 mm (3/16") 7.1 m (23.3') Dry, 8.6 m (28.4') Wet 375lpm (99 gpm)

PS8 Original Series 51 mm (2") 8.6 bar (125 psig) 6.4 mm (1/4") 7.2 m (23.8') Dry, 9.0 m (29.5') Wet 723lpm (191 gpm)

PS15 Original Series 76 mm (3") 8.6 bar (125 psig) 9.5 mm (3/8”) 8.6 m (28.4') Dry, 6.6 m (21.6') Wet 927lpm (245 gpm)

PS400 Advanced Series 38 mm (1-1/2") 8.6 bar (125 psig) 4.8 mm (3/16") 5.7 m (18.4') Dry, 8.6 m (28.4') Wet 507lpm (134 gpm)

PS800 Advanced Series 51 mm (2") 8.6 bar (125 psig) 6.4 mm (1/4") 6.4 m (21.0') Dry, 8.6 m (28.4') Wet 704lpm (186 gpm)

PS1500 Advanced Series 76 mm (3") 8.6 bar (125 psig) 12.7 mm (1/2") 7.2 m (23.8') Dry, 9.0 m (29.5') Wet 1056lpm (279 gpm)

State Of the Art Air Distribution Systems

Market Position: Features:Application traits:

Availability:

introducing the world’s most energy efficient pump in its class…

…that class now has a new leader!!!

The Pro-Flo® SHIFT is the new standard for AODD pumps. The innovative, yet simple, Pro-Flo® SHIFT Air Distribution System (ADS) features an “air control spool” that automatically optimizes air consumption and eliminates the overfilling that can lead to overcharging of the air chamber, all while causing no corresponding reduction in flow rate.

The Pro-Flo® SHIFT’s revolutionary ADS design meters the air flow, allowing for just enough air to keep the pumping process operational. The results are a reduction in air consumption and operational costs while maximum operational efficiency and volumetric consistency are maintained.

Now is the perfect time to shift your thinking in AODD pump performance with the “game-changing” Pro-Flo® SHIFT.

• Greater yield per SCFM of air used

• Wider application range

• Repeatable, predictable performance

• Less product waste

• Max. Mean Time Between Repair (MTBR)

• Increased application range compatibility

• Minimum training required

• No special skill set needed for maintenance or operation

• Cost efficient: 50% less expensive than an electronically actuated ADS

• Faster return on investment

• Robust design for harsh operating conditions

• Metered air consumption for less product waste

• Creates the highest performance ratio

• Superior flow rate

• Superior anti-freezing

• Single-point exhaust option

• Lube-free operation

• Reduced maintenance costs

• ON/OFF reliability

• Environmental sensitivity

• Simple and durable pump design

• Simple components

• Faster, easier setup time

• Plug-N-Play operation

• No electricity needed

• Precise flow rate at start-up

• Non-stalling unbalanced spool

• Drop-in configuration capability

• Reduced energy consumption

• Lower carbon footprint

• ATEX-compatible for use

• 38 mm (1-1/2")

• 51 mm (2")

• 76 mm (3")


25AO

DD P

UMPS

PS4- 38mm (1 ½”) Original Series Pump Dimensions

ITEM DIMENSION (mm)

A 368 B 64 C 231 D 429 E 213 F 48 G 147 H 324 J 525 K 51

Models

Model Number Designation Wetted Construction Non Wetted Construction Elastomers 04-12899 XPS4/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)

04-13014 XPS4/WMAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene

04-12919 XPS4/SSAAA/TWS/TF/STF/0014 Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)

ITEM DIMENSION (mm)

L 262 M 224 N 150 P 178 R 10 S 48 T 338 U 224 V 155 W 193 X 13

PS400- 38mm (1 ½”) Advanced Series Pump Dimensions

ITEM Dimensions (MM)

A 343 B 79 C 339 D 531 E 594 F 122 G 321 H 48 J 132 K 308

Models

Model Number Designation Wetted Construction Non Wetted Construction Elastomers 04-12934 XPS400/AAAAA/WFS/WF/WF Aluminium Aluminium Wilflex (Santoprene)

04-12932 XPS400/AAAAA/TWS/TF/ATF Aluminium Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)

04-13069 XPS400/SSSAA/BNS/BN/BN Stainless Steel Aluminium Buna (Nitrile)

ITEM Dimensions (mm)

L 518 M 244 N 206 P 152 R 170 S 10

DIN(mm) T 150 DIA U 110 DIA V 18 DIA

PS8- 50mm (2”) Original Series Pump Dimensions

ITEM Dimension (mm)

A 404 B 45 C 363 D 630 E 668 F 58 G 64 H 346 J 48 K 339 L 659 M 315

Models


08-14627 XPS8/WWAAA/NES/NE/NE/0014 Cast Iron Aluminium Neoprene


ITEM Dimension (mm)

N 257 P 231 R 257 S 15 T 64 U 51 V 284 W 58 X 279 Y 396 Z 15 DIA

PS800- 50mm Advanced Series Pumps Dimensions.


A 439 B 89 C 396 D 676 E 759 F 48 G 117 H 390 J 161 K 338

Models

Model Number Designation Wetted Construction Non Wetted Construction Elastomers

08-14531 XPS800/AAAAA/ZWS/WF/WF Aluminium Aluminium Wilflex (Santoprene)


08-14552 XPS800/SSAAA/BNS/BN/BN Stainless Steel Aluminium Buna (Nitrile)


L 659 M 330 N 254 P 325 R 378 S 15


PS15- 76mm (3”) Original Series Pumps Dimensions

ITEM Dimension (mm)

A 514 B 61 C 416 D 758 E 816 F 70 G 83 H 399 J 49 K 219 L 425 M 710

Models




ITEM Dimension (mm)

N 319 P 307 R 257 S 281 T 16 U 71 V 74 W 308 X 83 Y 305 Z 480

AA 16 DIA

PS1500- 76mm (3”) Advanced Series Pumps Dimensions.


A 615 B 127 C 551 D 934 E 1031 F 165 G 533 H 48 J 211 K 388

Models

Model Number Designation Wetted Construction Non Wetted Construction Elastomers 15-1236 XPS1500/AAAAA/NES/NE/NE Aluminium Aluminium Neoprene

15-12364 XPS1500/AAAAA/FWS/WF/WF Aluminium Aluminium Wilflex (Santoprene Sanitary grade)

15-12370 XPS1500/SSAAA/TWS/TF/STF Stainless Steel Aluminium PTFE (Full flow Teflon with Wilflex/ Santoprene back up)


L 709 M 363 N 307 P 259 R 282 S 18



ITEM DIMENSION (mm)

A 368 B 64 C 231 D 429 E 213 F 48 G 147 H 324 J 525 K 51

Models




ITEM DIMENSION (mm)

L 262 M 224 N 150 P 178 R 10 S 48 T 338 U 224 V 155 W 193 X 13



A 343 B 79 C 339 D 531 E 594 F 122 G 321 H 48 J 132 K 308

Models





L 518 M 244 N 206 P 152 R 170 S 10



ITEM Dimension (mm)

A 404 B 45 C 363 D 630 E 668 F 58 G 64 H 346 J 48 K 339 L 659 M 315

Models




ITEM Dimension (mm)

N 257 P 231 R 257 S 15 T 64 U 51 V 284 W 58 X 279 Y 396 Z 15 DIA



A 439 B 89 C 396 D 676 E 759 F 48 G 117 H 390 J 161 K 338

Models






L 659 M 330 N 254 P 325 R 378 S 15



ITEM Dimension (mm)

A 514 B 61 C 416 D 758 E 816 F 70 G 83 H 399 J 49 K 219 L 425 M 710

Models




ITEM Dimension (mm)

N 319 P 307 R 257 S 281 T 16 U 71 V 74 W 308 X 83 Y 305 Z 480

AA 16 DIA



A 615 B 127 C 551 D 934 E 1031 F 165 G 533 H 48 J 211 K 388

Models





L 709 M 363 N 307 P 259 R 282 S 18



ITEM DIMENSION (mm)

A 368 B 64 C 231 D 429 E 213 F 48 G 147 H 324 J 525 K 51

Models




ITEM DIMENSION (mm)

L 262 M 224 N 150 P 178 R 10 S 48 T 338 U 224 V 155 W 193 X 13



A 343 B 79 C 339 D 531 E 594 F 122 G 321 H 48 J 132 K 308

Models





L 518 M 244 N 206 P 152 R 170 S 10



ITEM Dimension (mm)

A 404 B 45 C 363 D 630 E 668 F 58 G 64 H 346 J 48 K 339 L 659 M 315

Models




ITEM Dimension (mm)

N 257 P 231 R 257 S 15 T 64 U 51 V 284 W 58 X 279 Y 396 Z 15 DIA



A 439 B 89 C 396 D 676 E 759 F 48 G 117 H 390 J 161 K 338

Models






L 659 M 330 N 254 P 325 R 378 S 15



ITEM Dimension (mm)

A 514 B 61 C 416 D 758 E 816 F 70 G 83 H 399 J 49 K 219 L 425 M 710

Models




ITEM Dimension (mm)

N 319 P 307 R 257 S 281 T 16 U 71 V 74 W 308 X 83 Y 305 Z 480

AA 16 DIA



A 615 B 127 C 551 D 934 E 1031 F 165 G 533 H 48 J 211 K 388

Models





L 709 M 363 N 307 P 259 R 282 S 18



ITEM DIMENSION (mm)

A 368 B 64 C 231 D 429 E 213 F 48 G 147 H 324 J 525 K 51

Models




ITEM DIMENSION (mm)

L 262 M 224 N 150 P 178 R 10 S 48 T 338 U 224 V 155 W 193 X 13



A 343 B 79 C 339 D 531 E 594 F 122 G 321 H 48 J 132 K 308

Models





L 518 M 244 N 206 P 152 R 170 S 10



ITEM Dimension (mm)

A 404 B 45 C 363 D 630 E 668 F 58 G 64 H 346 J 48 K 339 L 659 M 315

Models




ITEM Dimension (mm)

N 257 P 231 R 257 S 15 T 64 U 51 V 284 W 58 X 279 Y 396 Z 15 DIA



A 439 B 89 C 396 D 676 E 759 F 48 G 117 H 390 J 161 K 338

Models






L 659 M 330 N 254 P 325 R 378 S 15



ITEM Dimension (mm)

A 514 B 61 C 416 D 758 E 816 F 70 G 83 H 399 J 49 K 219 L 425 M 710

Models




ITEM Dimension (mm)

N 319 P 307 R 257 S 281 T 16 U 71 V 74 W 308 X 83 Y 305 Z 480

AA 16 DIA



A 615 B 127 C 551 D 934 E 1031 F 165 G 533 H 48 J 211 K 388

Models





L 709 M 363 N 307 P 259 R 282 S 18



ITEM DIMENSION (mm)

A 368 B 64 C 231 D 429 E 213 F 48 G 147 H 324 J 525 K 51

Models




ITEM DIMENSION (mm)

L 262 M 224 N 150 P 178 R 10 S 48 T 338 U 224 V 155 W 193 X 13



A 343 B 79 C 339 D 531 E 594 F 122 G 321 H 48 J 132 K 308

Models





L 518 M 244 N 206 P 152 R 170 S 10



ITEM Dimension (mm)

A 404 B 45 C 363 D 630 E 668 F 58 G 64 H 346 J 48 K 339 L 659 M 315

Models




ITEM Dimension (mm)

N 257 P 231 R 257 S 15 T 64 U 51 V 284 W 58 X 279 Y 396 Z 15 DIA



A 439 B 89 C 396 D 676 E 759 F 48 G 117 H 390 J 161 K 338

Models






L 659 M 330 N 254 P 325 R 378 S 15



ITEM Dimension (mm)

A 514 B 61 C 416 D 758 E 816 F 70 G 83 H 399 J 49 K 219 L 425 M 710

Models




ITEM Dimension (mm)

N 319 P 307 R 257 S 281 T 16 U 71 V 74 W 308 X 83 Y 305 Z 480

AA 16 DIA



A 615 B 127 C 551 D 934 E 1031 F 165 G 533 H 48 J 211 K 388

Models





L 709 M 363 N 307 P 259 R 282 S 18



ITEM DIMENSION (mm)

A 368 B 64 C 231 D 429 E 213 F 48 G 147 H 324 J 525 K 51

Models




ITEM DIMENSION (mm)

L 262 M 224 N 150 P 178 R 10 S 48 T 338 U 224 V 155 W 193 X 13



A 343 B 79 C 339 D 531 E 594 F 122 G 321 H 48 J 132 K 308

Models





L 518 M 244 N 206 P 152 R 170 S 10



ITEM Dimension (mm)

A 404 B 45 C 363 D 630 E 668 F 58 G 64 H 346 J 48 K 339 L 659 M 315

Models




ITEM Dimension (mm)

N 257 P 231 R 257 S 15 T 64 U 51 V 284 W 58 X 279 Y 396 Z 15 DIA



A 439 B 89 C 396 D 676 E 759 F 48 G 117 H 390 J 161 K 338

Models






L 659 M 330 N 254 P 325 R 378 S 15



ITEM Dimension (mm)

A 514 B 61 C 416 D 758 E 816 F 70 G 83 H 399 J 49 K 219 L 425 M 710

Models




ITEM Dimension (mm)

N 319 P 307 R 257 S 281 T 16 U 71 V 74 W 308 X 83 Y 305 Z 480

AA 16 DIA



A 615 B 127 C 551 D 934 E 1031 F 165 G 533 H 48 J 211 K 388

Models





L 709 M 363 N 307 P 259 R 282 S 18


aoDD pumpsPrO-FLO

modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS04-12899 XPS4/AAAAA/BNS/BN/BN/0014 Aluminium Aluminium Buna (Nitrile)









itEmdimEnSion (mm)

A 368B 64C 231D 429E 213F 48G 147H 324J 525K 51

itEmdimEnSion (mm)

A 404B 45C 363D 630E 668F 58G 64H 346J 48K 339L 659M 315

itEmdimEnSion (mm)

A 514B 61C 416D 758E 816F 70G 83H 399J 49K 219L 425M 710

PS4-38mm (1 ½”) - Original Series

PS8-50mm (2”) - Original Series

PS15-76mm (3”) - Original Series

Models

Models

Models

Dimensions

Dimensions

Dimensions

Performance Curve

Performance Curve

Performance Curve

itEmdimEnSion (mm)

L 262M 224N 150P 178R 10S 48T 338U 224V 155W 193X 13

itEmdimEnSion (mm)

N 257P 231R 257S 15T 64U 51V 284W 58X 279Y 396Z 15 DIA

itEmdimEnSion (mm)

N 319P 307R 257S 281T 16U 71V 74W 308X 83Y 305Z 480AA 16 DIA


2626


ITEM DIMENSION (mm)

A 368 B 64 C 231 D 429 E 213 F 48 G 147 H 324 J 525 K 51

Models




ITEM DIMENSION (mm)

L 262 M 224 N 150 P 178 R 10 S 48 T 338 U 224 V 155 W 193 X 13



A 343 B 79 C 339 D 531 E 594 F 122 G 321 H 48 J 132 K 308

Models





L 518 M 244 N 206 P 152 R 170 S 10



ITEM Dimension (mm)

A 404 B 45 C 363 D 630 E 668 F 58 G 64 H 346 J 48 K 339 L 659 M 315

Models




ITEM Dimension (mm)

N 257 P 231 R 257 S 15 T 64 U 51 V 284 W 58 X 279 Y 396 Z 15 DIA



A 439 B 89 C 396 D 676 E 759 F 48 G 117 H 390 J 161 K 338

Models






L 659 M 330 N 254 P 325 R 378 S 15



ITEM Dimension (mm)

A 514 B 61 C 416 D 758 E 816 F 70 G 83 H 399 J 49 K 219 L 425 M 710

Models




ITEM Dimension (mm)

N 319 P 307 R 257 S 281 T 16 U 71 V 74 W 308 X 83 Y 305 Z 480

AA 16 DIA



A 615 B 127 C 551 D 934 E 1031 F 165 G 533 H 48 J 211 K 388

Models





L 709 M 363 N 307 P 259 R 282 S 18



ITEM DIMENSION (mm)

A 368 B 64 C 231 D 429 E 213 F 48 G 147 H 324 J 525 K 51

Models




ITEM DIMENSION (mm)

L 262 M 224 N 150 P 178 R 10 S 48 T 338 U 224 V 155 W 193 X 13



A 343 B 79 C 339 D 531 E 594 F 122 G 321 H 48 J 132 K 308

Models





L 518 M 244 N 206 P 152 R 170 S 10



ITEM Dimension (mm)

A 404 B 45 C 363 D 630 E 668 F 58 G 64 H 346 J 48 K 339 L 659 M 315

Models




ITEM Dimension (mm)

N 257 P 231 R 257 S 15 T 64 U 51 V 284 W 58 X 279 Y 396 Z 15 DIA



A 439 B 89 C 396 D 676 E 759 F 48 G 117 H 390 J 161 K 338

Models






L 659 M 330 N 254 P 325 R 378 S 15



ITEM Dimension (mm)

A 514 B 61 C 416 D 758 E 816 F 70 G 83 H 399 J 49 K 219 L 425 M 710

Models




ITEM Dimension (mm)

N 319 P 307 R 257 S 281 T 16 U 71 V 74 W 308 X 83 Y 305 Z 480

AA 16 DIA



A 615 B 127 C 551 D 934 E 1031 F 165 G 533 H 48 J 211 K 388

Models





L 709 M 363 N 307 P 259 R 282 S 18



ITEM DIMENSION (mm)

A 368 B 64 C 231 D 429 E 213 F 48 G 147 H 324 J 525 K 51

Models




ITEM DIMENSION (mm)

L 262 M 224 N 150 P 178 R 10 S 48 T 338 U 224 V 155 W 193 X 13



A 343 B 79 C 339 D 531 E 594 F 122 G 321 H 48 J 132 K 308

Models





L 518 M 244 N 206 P 152 R 170 S 10



ITEM Dimension (mm)

A 404 B 45 C 363 D 630 E 668 F 58 G 64 H 346 J 48 K 339 L 659 M 315

Models




ITEM Dimension (mm)

N 257 P 231 R 257 S 15 T 64 U 51 V 284 W 58 X 279 Y 396 Z 15 DIA



A 439 B 89 C 396 D 676 E 759 F 48 G 117 H 390 J 161 K 338

Models






L 659 M 330 N 254 P 325 R 378 S 15



ITEM Dimension (mm)

A 514 B 61 C 416 D 758 E 816 F 70 G 83 H 399 J 49 K 219 L 425 M 710

Models




ITEM Dimension (mm)

N 319 P 307 R 257 S 281 T 16 U 71 V 74 W 308 X 83 Y 305 Z 480

AA 16 DIA



A 615 B 127 C 551 D 934 E 1031 F 165 G 533 H 48 J 211 K 388

Models





L 709 M 363 N 307 P 259 R 282 S 18



ITEM DIMENSION (mm)

A 368 B 64 C 231 D 429 E 213 F 48 G 147 H 324 J 525 K 51

Models




ITEM DIMENSION (mm)

L 262 M 224 N 150 P 178 R 10 S 48 T 338 U 224 V 155 W 193 X 13



A 343 B 79 C 339 D 531 E 594 F 122 G 321 H 48 J 132 K 308

Models





L 518 M 244 N 206 P 152 R 170 S 10



ITEM Dimension (mm)

A 404 B 45 C 363 D 630 E 668 F 58 G 64 H 346 J 48 K 339 L 659 M 315

Models




ITEM Dimension (mm)

N 257 P 231 R 257 S 15 T 64 U 51 V 284 W 58 X 279 Y 396 Z 15 DIA



A 439 B 89 C 396 D 676 E 759 F 48 G 117 H 390 J 161 K 338

Models






L 659 M 330 N 254 P 325 R 378 S 15



ITEM Dimension (mm)

A 514 B 61 C 416 D 758 E 816 F 70 G 83 H 399 J 49 K 219 L 425 M 710

Models




ITEM Dimension (mm)

N 319 P 307 R 257 S 281 T 16 U 71 V 74 W 308 X 83 Y 305 Z 480

AA 16 DIA



A 615 B 127 C 551 D 934 E 1031 F 165 G 533 H 48 J 211 K 388

Models





L 709 M 363 N 307 P 259 R 282 S 18



ITEM DIMENSION (mm)

A 368 B 64 C 231 D 429 E 213 F 48 G 147 H 324 J 525 K 51

Models




ITEM DIMENSION (mm)

L 262 M 224 N 150 P 178 R 10 S 48 T 338 U 224 V 155 W 193 X 13



A 343 B 79 C 339 D 531 E 594 F 122 G 321 H 48 J 132 K 308

Models





L 518 M 244 N 206 P 152 R 170 S 10



ITEM Dimension (mm)

A 404 B 45 C 363 D 630 E 668 F 58 G 64 H 346 J 48 K 339 L 659 M 315

Models




ITEM Dimension (mm)

N 257 P 231 R 257 S 15 T 64 U 51 V 284 W 58 X 279 Y 396 Z 15 DIA



A 439 B 89 C 396 D 676 E 759 F 48 G 117 H 390 J 161 K 338

Models






L 659 M 330 N 254 P 325 R 378 S 15



ITEM Dimension (mm)

A 514 B 61 C 416 D 758 E 816 F 70 G 83 H 399 J 49 K 219 L 425 M 710

Models




ITEM Dimension (mm)

N 319 P 307 R 257 S 281 T 16 U 71 V 74 W 308 X 83 Y 305 Z 480

AA 16 DIA



A 615 B 127 C 551 D 934 E 1031 F 165 G 533 H 48 J 211 K 388

Models





L 709 M 363 N 307 P 259 R 282 S 18



ITEM DIMENSION (mm)

A 368 B 64 C 231 D 429 E 213 F 48 G 147 H 324 J 525 K 51

Models




ITEM DIMENSION (mm)

L 262 M 224 N 150 P 178 R 10 S 48 T 338 U 224 V 155 W 193 X 13



A 343 B 79 C 339 D 531 E 594 F 122 G 321 H 48 J 132 K 308

Models





L 518 M 244 N 206 P 152 R 170 S 10



ITEM Dimension (mm)

A 404 B 45 C 363 D 630 E 668 F 58 G 64 H 346 J 48 K 339 L 659 M 315

Models




ITEM Dimension (mm)

N 257 P 231 R 257 S 15 T 64 U 51 V 284 W 58 X 279 Y 396 Z 15 DIA



A 439 B 89 C 396 D 676 E 759 F 48 G 117 H 390 J 161 K 338

Models






L 659 M 330 N 254 P 325 R 378 S 15



ITEM Dimension (mm)

A 514 B 61 C 416 D 758 E 816 F 70 G 83 H 399 J 49 K 219 L 425 M 710

Models




ITEM Dimension (mm)

N 319 P 307 R 257 S 281 T 16 U 71 V 74 W 308 X 83 Y 305 Z 480

AA 16 DIA



A 615 B 127 C 551 D 934 E 1031 F 165 G 533 H 48 J 211 K 388

Models





L 709 M 363 N 307 P 259 R 282 S 18


aoDD pumpsPrO-FLO

modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS04-12934 XPS400/AAAAA/WFS/WF/WF Aluminium Aluminium Wilflex (Santoprene)



modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS08-14531 XPS800/AAAAA/ZWS/WF/WF Aluminium Aluminium Wilflex (Santoprene)



modEl numBEr Full dESiGnAtion WEttEd conStruction non WEttEd conStruction ElAStomErS15-1236 XPS1500/AAAAA/NES/NE/NE Aluminium Aluminium Neoprene



itEmdimEnSion (mm)

A 343B 79C 339D 531E 594F 122G 321H 48J 132K 308

itEmdimEnSion (mm)

L 518M 244N 206P 152R 170S 10

DIN(mm)T 150 DIAU 110 DIAV 18 DIA

itEmdimEnSion (mm)

A 439B 89C 396D 676E 759F 48G 117H 390J 161K 338

itEmdimEnSion (mm)

ç 615B 127C 551D 934E 1031F 165G 533H 48J 211K 388

PS400-38mm (1 ½”) - Advanced Series

PS800-50mm (2") - Advanced Series

PS1500-76mm (3”) - Advanced Series

Models

Models

Models

Dimensions

Dimensions

Dimensions

Performance Curve

Performance Curve

Performance Curve

itEmdimEnSion (mm)

L 659M 330N 254P 325R 378S 15


itEmdimEnSion (mm)

L 709M 363N 307P 259R 282S 18



27AO

DD P

UMPS

aoDD pumpsMININg SerIeS PUMPS

PX438mm (11/2") METAL STALLION

PX850mm (2") METAL STALLION

PX1576mm (3") METAL STALLION

Stallion Solids Hangling Pumps

Features

The stallion pump series can handle what miners demand: durability, portability and ease of maintenance. The stallion pump is designed to transfer solid-laden slurries safely and effectively. Large internal clearance and flow-through design keep the pump from clogging while Wilden's patented air distribution systems maintains ON/OFF reliability

• Large solids to 25mm (1")

• Collapsible handles

• Shock absorbing base

• Intrinsically safe operation

• Screen base models

PumP modEl Air SyStEm conStruction ElAStomErS connEctionS

T2/PKPPB/NES/NE/PBN/0400 TURBO-FLO POLYPROPYLENE NEOPRENE 1” ANSI FLANGE

P4/PWSPP/NEU/NE/PBN PRO-FLO POLYPROPYLENE NEOPRENE 11/2” ANSI FLANGE

T4/PWPPB/NEU/NE/PBN TURBO-FLO POLYPROPYLENE NEOPRENE 11/2” ANSI FLANGE

P4/WWLLL/NEU/NE/NE/0118 PRO-FLO CAST IRON NEOPRENE 11/2” BSPT (F)

T4/WWPPB/NEU/NE/NE0282 TURBO-FLO CAST IRON NEOPRENE 11/2” BSPT (F)

P8/PKWPP/NEU/NE/PBN PRO-FLO POLYPROPYLENE NEOPRENE 2” ANSI FLANGE

T8/PKWPB/NEU/NE/PBN TURBO-FLO POLYPROPYLENE NEOPRENE 2” ANSI FLANGE

P8/WWWPP/NEU/NE/NE/0118 PRO-FLO CAST IRON NEOPRENE 2” BSPT (F)

T8/WWWPB/NEU/NE/NE/0118 TURBO-FLO CAST IRON NEOPRENE 2” BSPT (F)

T15/WWWPB/NEU/NE/NE0046 TURBO-FLO CAST IRON NEOPRENE 3” BSPT (F)

T20/WWWPB/NEU/PU/PEP TURBO-FLO CAST IRON NEOPRENE 4” ANSI FLANGE

Features• Large solids to 25 mm (1")• Collapsible handles• Shock absorbing base• Intrinsically safe operation• Screen base models

Stallion Solids Handing PumpsThe Stallion pump series can handle what minersdemand: durability, portability and ease of maintenance. The Stallion pump is designed totransfer solid-laden slurries safely and effectively.Large internal clearance and flow-through designkeep the pump from clogging while Wilden'spatented airdistribution systemmaintainsON/OFFreliability.


2828aoDD pumpsMININg SerIeS PUMPS

� ��

��

��

��

��

ruBBEr FittEd t2r PlAStic PumP

ruBBEr FittEd P4 mEtAl PumP

ruBBEr FittEd t8 PlAStic PumP


ruBBEr FittEd t20 mEtAl PumP

ruBBEr FittEd t4 PlAStic PumP





29AO

DD P

UMPS

aoDD pumpsHIgH PreSSUre PUMPS

Wilden's Brahma™ Flap Valve pump is designed for maximum solids passage. Its enhanced durability, rugged design and outstanding performance make Brahma the right choice for the toughest applications out there.

The Brahma is available in two air distribution system (ADS) options: the rugged and reliable Turbo-Flo™ and the revolutionary Pro-Flo X™.

PX81051mm (2")

METAL

PX151076mm (3")

METAL


3030aoDD pumpsMININg SerIeS PUMPS

Wilden’s high pressure product line was designed to reliably transfer viscous, solid-laden slurries at high head pressures. These air-operated, diaphragm pumps are available with simplex or duplex technology to generate 17.2 bar (250 psig).

The simplex creates a 2:1 pressure ratio while the duplex creates a 3:1 pressure ratio. Wilden high pressure pumps do not require costly external boosters or amplifiers to achieve this pressure output. Our powerful solutions will create profitable results in your application.

H20025mm (1")

METAL

H80051mm (2") ALUMINUM

HX400S25mm (11/2") ALUMINUM

HX400S38mm (11/2")

STAINLESS STEEL

H1500HS76mm (3")

STAINLESS STEEL


31AO

DD P

UMPS

aoDD pumpsHYgIeNIC/SANIFLO PUMPS

The Saniflo™ Series pump line is specifically designed to meet the strict guidelines established for sanitary process applications. Saniflo™ pumps incorporate a straight flowthrough design, large solids passage and efficiencies to insure process success. Saniflo™ pumps have a shear sensitive operation, Tri-clamp® style fittings and are offered in various surface finishes. The Saniflo™ pump line also offers pumps that are CIP (clean in place) and COP (clean out of place) for ease of use and maintenance.

Wilden is consistently meeting and exceeding industry standards by having the certifications needed (FDA, USDA, 3A, ATEX) in order to help refine your process. Saniflo™ Series Pumps are used in the Food and Beverage and Biopharmaceutical industries.

Hygienic SeriesFEAturES tEchnicAl dAtA

Pro-Flo X™ ADS Sizes available 25mm (1”)through to 76mm (3”)

Sanitary & Hygienic applications 316L Stainless Steel wetted components

Delicate/shear sensitive product handling

Contact surfaces with Ra 0.8μm (32μ-in)

Integral piston diaphragm options

Valve options available: ball,mushroom, flap

Multiple sanitary elastomers available Tri-clamp™ style connections

Superior product containment

Swivel stand available PErFormAncE dAtA

CIP (Clean In Place) Max flow rates 874lpm (231gpm) (Valve ball style)

Multiple certification levels available

Max suction lift: Dry: 5.5m(19.2’), Wet: 9.3m (30.6’)

(Valve ball style)

Certifications: EHEDG, 3-A,ATEX, CE, USP Class VI, FDA

Max size solids: 76mm (3”) (Flapvalve style not available in

25mm (1”) models)

Offset valve housing for easy alignment


3232aoDD pumps

HYgIeNIC/SANIFLO PUMPS

Saniflo SeriesFEAturES tEchnicAl dAtA

Pro-Flo®, Pro-Flo X™ and Accu-Flo™ ADS available

Sizes available: 13mm (1/2”)through 76mm (3”)

For sanitary applications 316L Stainless Steel wetted components

Multiple sanitary FDA elastomers available Tri-clamp™ style connections

Shear sensitive

Intrinsically safe options PErFormAncE dAtA

Certifications: FDA, CE, ATEX Max flow rate: 920lpm (243gpm)

Max suction lift: Dry: 7.6m (25.0’), Wet: 9.5m (31.2’)

Max size solids: 76mm (3”) (Flapvalve style not available in

25mm (1”) models)

Max solids size: 9.5mm (3/8”)


33AO

DD P

UMPS

aoDD pumpsOrIgINAL SerIeS - SUrge DAMPeNerS

The SD Equalizer® was designed to remove pressure variation on the discharge end of the pump. It has a flow-through design manufactured with existing Wilden pump parts. The SD series automatically sets and maintains the correct air pressure required, optimising its effectiveness.

• Reduces pipe vibration and shaking

• Protects in-line equipment

• Reduces water hammer

• Absorbs acceleration head

• Lowers system maintenance cost

• Suction stabiliser

• Prevents leaking at pipe fittings and joints

• Extends and improves pump performance

• Avoids damaging pressure surges

• Wide range of material and elastomer options

• Common parts with Wilden pumps

• Self adjusts to system pressure

AvAilABlE SizESmAtEriAlS oF conStruction:

WEttEd houSinG Air diStriBution SyStEm

13 mm (1/2") Aluminum Aluminum

25 mm (1") 316 Stainless Steel 316 Stainless Steel

38 mm (1-1/2") Ductile Iron PTFE-coated Ductile Iron

51 mm (2") Polypropylene Polypropylene

76 mm (3") PVDF Glass-filled Polypropylene

Mild Steel PTFE-coated

EnErGy SAvinG Reliable On-Off control of air driven pumps conserves costly compressed air and saves pumps parts

non BuBBlinG Design eliminates constant 24 hr/day usage of instrument air

rEliABlE No moving parts in contact with the liquid being sensed - Thousands of units in use since 1978

FloAtlESS Works in foamy “gunky” turbulent areas where other controls fail. Operates on any liquid that will rise and fall by gravity in the 4” sensing tube

non ElEctric No costly wiring - one trade installs and service

ExPloSion rESiStAnt All pneumatic design allows use in hazardous areas

FrEQuEnt cyclinG Pumps away suspended materials before they settle and harden

APCO Level Controller

Features and Benefits:

• Control Pumps In Sumps as shallow as 12”

• Fill Overhead Tanks

• Control Pinch Valves, Cylinders and Other Pneumatic Equipment

• Packaged Systems AvailableModel #1010RFor Deep Sumps and Tank Filling

Model #1010For Shallow Sumps and Submerged Pump Applications


3434aoDD pumps

OrIgINAL SerIeS -ACCeSSOrIeSWilden’s accessory products add value to your liquid process and expand the application range of Wilden pumps by augmenting the performance and/or utility of the pump. Our electronic controllers automate your Wilden pump for batching and other electronically controlled dispensing applications. We can also create laminar process flow by eliminating pump pulsation, or control the liquid level within a system of process.

WILDeN Wil-gardThe Wil-GardTM detects diaphragm failure at the source: the primary diaphragm, not at the air chamber or the air exhaust as other systems do.

• Sensors are located between the primary and back-up (containment) diaphragms

• When the sensors detect a conductive liquid, anaudible alarm, LED and an internal latching relay are activated

• Increase containment, reduce fugitive emissions and reduce downtime with 24-hour pump surveillance

• Power requirement:110VAC, 220V AC or 9V DC battery

WILDeN Pump Cycle MonitorThe PCMI counts pump cycles by sensing the presence of the air valve piston (Turbo-FloTM) or air valve spool (Pro-FloTM).

• The sensor, located at the air valve and cap, detects the presence of a magnet located at the end of the air valve piston/spool

• The PCMI registers a complete pump cycle when the piston/spool shifts away from the sensor and subsequently returns to the original position

• The PCMI unit has a reset switch located on the face of the PCMI module

• PCMI has the ability to be reset from a remote location

WILDeN Drum Pump KitThe inherent features of the Wilden air-operated pump and Accu-FloTM pump technology allow it to excel as a utilitarian drum pump. Various speed and pressure capability, the ability to run dry, self-prime and dead-head offers you flexibility at a low cost. The Wilden universal drum pump kit enables Wilden 6 mm (1/4") and 13 mm (1/2") pumps to adapt directly to drums for cost-effective, efficient liquid transfer.

• Universal kit for 6mm(1/4") and 13mm(1/2") pumps • Fits 51mm(2") NPT bung holes

• Tube length can be cut to length

• Variety of materials are available


35AO

DD P

UMPS

Almatec Maschinenbau GmbH is a premium manufacturer of air-operated double-diaphragm (AODD) pumps and a company which has successfully combined a worldwide presence with proximity to the end-user. Permanent product innovations and improvements have resulted in a large range of products and the opening up of new markets. Our extensive product range offers sophisticated and economical solutions for all of your applications.

The standard-setting advantages of pneumatic (or air-operated) diaphragm pumps include protection against dry running and overloading, self-priming capability, infinitely control, easy start up, no rotating parts in the product stream, solid handling capability and gentle displacement. The quality requirements of our pumps is high. Solid design, Perswing P® air control system, diaphragms and best-in-class materials are quality features demanded by our customers

The E-Series represents the latest generation of plastic air-operated double diaphragm pumps made in solid design. A few of the advantages of this pump include:

• Further increased pump safety due to innovative ring-tightening structure

• Increased capacity

• Decreased air consumption

• Reduced noise level

• Optimized flow pattern

Particular attention has been paid to the form of the product chambers when designing the metal pneumatic diaphragm pumps from

Almatec. CHEMICOR pumps with a centre block made of PE conductive meet the ATEX requirements of the directive 94/9/EG.

Further features of series CHEMICOR include:

• Two vertical joint faces only

• No clamping bands but tie rods

• Freely rotating suction and discharge ports

• Compact solid design

• Patented maintenance-free air control system perswing® without dead centre

aoDD pumpsALMAteC

e-Series

Chemicor

E-Series

CHEMICOR

BIOCOR

FUTUR

AH

CX

QUATTROFLOW

The CX series diaphragm pumps are used as general-purpose pumps for low to medium duty and also as drum pumps. They are

used to empty containers down to the very last drop and can therefore be used for complete and unattended transfer of liquids from

one container to another. The series comprises four pump sizes with maximum delivery volumes of 10, 20, 50 and 130 l/min (2.6, 5.3,

13.2 and 34 gpm). The housings are made of solid PE conductive for the use in explosion-protected areas.

Further features of series CX at a glance:

• with ball or cylinder valves

• composite diaphragms with integrated metal core

• metal free outer surface

• variable position of suction and discharge port

• handle recess with drainage

Options

A variety of optional equipment is available to allow for a precise set-up to your specific application.

Pulsation Damper

If a virtually uniform flow is needed, pulsation dampers in different versions are available.

Pump series: E-SERIES, CHEMICOR, BIOCOR, FUTUR

Barrier Chamber System

The ALMATEC barrier chamber system meets high safety requirements. The individual diaphragm is replaced by two diaphragms arranged in tandem with a barrier chamber of conductive PE between them and

filled with non-conductive liquid. A change in conductivity of the barrier liquid is detected by sensors and signalled to a controller, which triggers an alarm or disconnects the pump.

Pump series: E-SERIES, CHEMICOR, BIOCOR

Stroke Counting

ALMATEC air-operated diaphragm pumps can be used continuously (24h operation) or intermittently for hours, minutes or for an exact defined number of strokes. To accurately count the strokes a sensor can be

installed in the pump's center housing (available as pneumatic version also).

Pump series: E-SERIES, CHEMICOR, BIOCOR, AH, FUTUR

Diaphragm Monitoring

A capacitive sensor installed in the pump muffler detects the presence of liquids and in case of a diaphragm rupture it relays a corresponding signal to a controller that triggers an alarm or disconnects the pump via

a connected solenoid valve.


Flange Connection

According to recognized industry safety standards, all E-SERIES pump sizes from E 15 to E 80 can be equipped with thread bushings and flange-O-rings for flange connections to DIN or ANSI / PN 10.

Pump series: E-SERIES

Draining System

The E-SERIES pumps in sizes 15 to 50 are available with a special ALMATEC draining system consisting of a bypass system in the side housings that can be activated easily either via hand-operated valves or

pneumatically. In this way, the pump and piping can be drained without having to be dismounted. The amount of cleaning agent and solvent required when changing products is reduced considerably and this

greatly reduces environmental pollution.


Almatec Maschinenbau GmbH is a premium manufacturer of air-operated double-diaphragm (AODD) pumps and a company which has successfully combined a worldwide presence with proximity to the end-user.

Permanent product innovations and improvements have resulted in a large range of products and the opening up of new markets. Our extensive product range offers sophisticated and economical solutions for all

of your applications.

The standard-setting advantages of pneumatic (or air-operated) diaphragm pumps include protection against dry running and overloading, self-priming capability, infinitely control, easy start up, no rotating parts in

the product stream, solid handling capability and gentle displacement. The quality requirements of our pumps is high. Solid design, Perswing P® air control system, diaphragms and best-in-class materials are

quality features demanded by our customers




• two vertical joint faces only

• no clamping bands but tie rods

• freely rotating suction and discharge ports

• compact solid design

• patented maintenance-free air control system PERSWING® without dead centre

The ALMATEC pump series BIOCOR is especially designed for sterile applications within the pharmaceutical, biotechnical and

food industry.As demanded for in these applications all housing parts of the BIOCOR pumps have no horizontal areas and each

pump comes with four ball lifting magnets, which magnetically lift the balls off their seats so the pump can be drained entirely

without having to be dismounted. The three pump sizes B 20, B 32 and B 40 achieve max. capacities of 3.5/7.5/17 m³/h

(15.4/33/75 gpm) respectively and a max. discharge pressure of up to 7 bar (100 psig). The wetted housing parts are electro

polished 316 L stainless steel with a surface roughness of 0.4 m, and the centre block is made of conductive polyethylene.

Some of the features of the BIOCOR series include:

• Built in accordance to the essential specifications (EHEDG, 3-A, FDA, Class VI etc.)

• Integrated cleaning-system with high cleaning results

• CIP (clean in place) and SIP (sterilization in place) possible

• Sterile design: no horizontal areas

• Suction and discharge ports suitable for Tri-Clamp and other sanitary threads

ALMATEC's high-pressure diaphragm pumps made of plastic have been specially developed for charging filter presses with

chemical wastes and special sludge. With a driving pressure of max. 7 bar (100 psig), the AH series of pumps build up a delivery

pressure of 15 bar (218 psig) due to internal pressure boost. These genuine double-action pneumatic diaphragm pumps are

available in three sizes with a maximum delivery volume of 4 m³/h / 70 l/min / 18.5 gpm (AH 15), 10 m³/h / 180 l/min / 48 gpm (AH

25) and 20 m³/h / 330 l/min / 87 gpm (AH 40). All housing parts in contact with the product are made of PE UHMW which is

seven times more resistant to abrasion than Polypropylene and is also more wear resistant than iron, aluminium and some steels.

Some of the features of the series include:

• no control or safety elements required for safe operation over the entire range of capacity without over pressure

• corrosion and abrasion proof housing

• horizontal or vertical position for suction and discharge ports

• price alternative to piston-actuated diaphragm pumps and progressive cavity pumps

Since 1984 ALMATEC has manufactured specialist pumps for the chemical supply and circulation in the semiconductor industry.

The liquids handled in this industry set different demands to the pumps and the FUTUR series is available in a range of materials.

The different pump sizes achieve max. capacities between 10 and 200 l/min (2.6 - 52 gpm). The pumps have a compact, simple

design with few parts. The housing parts are machined from solid blocks, the basis for a long life time.

Some of the many features of the FUTUR series include:

four materials (T, H, E, S) for the different applications

no metal at all (T, H, E) temperature range up to 200°C/390°F (H)

patented, contactless cascade sealing between the product chambers no O-ring sealing in wetted areas straight-through flow pattern, only one wetted housing part

compact, simple design with few parts, very low space requirement

Quattroflow's positive displacement pumps incorporate four piston-diaphragm technology, with no mechanical seals, that are

driven by an eccentric shaft and electrical motor. Quattroflow products primarily serve the pharmaceutical and biotech industries

that require reliability, product safety, purity and cleanability.

The Quattroflow production program consists of four pump series:

- QF 150: This pump series is the best entry for laboratories, research centers and universities - small, portable, quiet and

scalable.

- QF 1200: A versatile tool for many applications in laboratories, pilot and production plants worldwide. Stainless steel valve plate

and new diaphragms allow inline steaming, autoclaving and easy cleaning.

- QF 4400: The QF-4400 Series is used in mid-sized crossflow systems and in chromatography systems, where gradient mixing

requires a 100:1 turndown ratio.

- QF 20K: The biggest Quattroflow pump with a max. capacity of 20000 l/h meets the requirements of high process volumes.

The pump series 150, 1200 and 4400 are also available in a "single use" version with product chambers made of plastic. The

main focus is the demand of the users for prevention of expensive and time-consuming flushing.

The E-Series represents the latest generation of plastic air-operated double diaphragm pumps made in solid design. A few of the

advantages of this pump include:

• further increased pump safety due to innovative ring-tightening structure

• increased capacity

• decreased air consumption

• reduced noise level

• optimized flow pattern

E-Series

CHEMICOR

BIOCOR

FUTUR

AH

CX

QUATTROFLOW











Options


Pulsation Damper







Stroke Counting








Flange Connection



Draining System
























































scalable.
















3636

The ALMATEC pump series BIOCOR is especially designed for sterile applications within the pharmaceutical, biotechnical and food industry. As demanded for in these applications all housing parts of the BIOCOR pumps have no horizontal areas and each pump comes with four ball lifting magnets, which magnetically lift the balls off their seats so the pump can be drained entirely without having to be dismounted.

The three pump sizes B 20, B 32 and B 40 achieve max. capacities of 3.5/7.5/17 m³/h (15.4/33/75 gpm) respectively and a max. discharge pressure of up to 7 bar (100 psig). The wetted housing parts are electro polished 316 L stainless steel with a surface roughness of 0.4 μm, and the centre block is made of conductive polyethylene. Some of the features of the BIOCOR series include:



• CIP (clean in place) and SIP (sterilization in place)possible








• Four materials (t, h, e, s) for the different applications

• No metal at all (t, h, e)

• Temperature range up to 200°c/390°f (h)

• Patented, contactless cascade sealing between the product chambers

• No o-ring sealing in wetted areas

• Straight-through flow pattern, only one wetted housing part

• Compact, simple design with few parts, very low space requirement

aoDD pumpsALMAteC

BIOCOr

FUtUr

E-Series

CHEMICOR

BIOCOR

FUTUR

AH

CX

QUATTROFLOW











Options


Pulsation Damper







Stroke Counting








Flange Connection



Draining System
























































scalable.















E-Series

CHEMICOR

BIOCOR

FUTUR

AH

CX

QUATTROFLOW











Options


Pulsation Damper







Stroke Counting








Flange Connection



Draining System
























































scalable.
















37AO

DD P

UMPS

ALMATEC's high-pressure diaphragm pumps made of plastic have been specially developed for charging filter presses with chemical wastes and special sludge. With a driving pressure of max. 7 bar (100 psig), the AH series of pumps build up a delivery pressure of 15 bar (218 psig) due to internal pressure boost. These genuine double-action pneumatic diaphragm pumps are available in three sizes with a maximum delivery volume of 4 m³/h / 70 l/min / 18.5 gpm (AH 15), 10 m³/h / 180 l/min / 48 gpm (AH 25) and 20 m³/h / 330 l/min / 87 gpm (AH 40). All housing parts in contact with the product are made of PE UHMW which is seven times more resistant to abrasion than Polypropylene and is also more wear resistant than iron, aluminium and some steels.


• No control or safety elements required for safe operation over the entire range of capacity without over pressure

• Corrosion and abrasion proof housing

• Horizontal or vertical position for suction and discharge ports

• Price alternative to piston-actuated diaphragm pumps and progressive cavity pumps






• With ball or cylinder valves

• Composite diaphragms with integrated metal core

• Metal free outer surface

• Variable position of suction and discharge port

• Handle recess with drainage

aoDD pumpsALMAteC

AH

CX

E-Series

CHEMICOR

BIOCOR

FUTUR

AH

CX

QUATTROFLOW











Options


Pulsation Damper







Stroke Counting








Flange Connection



Draining System
























































scalable.















E-Series

CHEMICOR

BIOCOR

FUTUR

AH

CX

QUATTROFLOW











Options


Pulsation Damper







Stroke Counting








Flange Connection



Draining System
























































scalable.
















3838

E-Series

CHEMICOR

BIOCOR

FUTUR

AH

CX

QUATTROFLOW











Options


Pulsation Damper







Stroke Counting








Flange Connection



Draining System
























































scalable.















Quattroflow's positive displacement pumps incorporate four piston-diaphragm technology, with no mechanical seals, that are driven by an eccentric shaft and electrical motor. Quattroflow products primarily serve the pharmaceutical and biotech industries that require reliability, product safety, purity and cleanability.


- QF 150: This pump series is the best entry for laboratories, research centers and universities - small, portable, quiet and scalable.

- QF 1200: A versatile tool for many applications in laboratories, pilot and production plants worldwide. Stainless steel valve plate and new diaphragms allow inline steaming, autoclaving and easy cleaning.

- QF 4400: The QF-4400 Series is used in mid-sized crossflow systems and in chromatography systems, where gradient mixing requires a 100:1 turndown ratio.


The pump series 150, 1200 and 4400 are also available in a "single use" version with product chambers made of plastic. The main focus is the demand of the users for prevention of expensive and time-consuming flushing.


Pulsation damperIf a virtually uniform flow is needed, pulsation dampers in different versions are available.


Barrier chamber SystemThe ALMATEC barrier chamber system meets high safety requirements. The individual diaphragm is replaced by two diaphragms arranged in tandem with a barrier chamber of conductive PE between them and



Stroke countingALMATEC air-operated diaphragm pumps can be used continuously (24h operation) or intermittently for hours, minutes or for an exact defined number of strokes. To accurately count the strokes a sensor can be installed in the pump's center housing (available as pneumatic version also).


diaphragm monitoringA capacitive sensor installed in the pump muffler detects the presence of liquids and in case of a diaphragm rupture it relays a corresponding signal to a controller that triggers an alarm or disconnects the pump via a connected solenoid valve.


Flange connectionAccording to recognized industry safety standards, all E-SERIES pump sizes from E 15 to E 80 can be equipped with thread bushings and flange-O-rings for flange connections to DIN or ANSI / PN 10.


draining SystemThe E-SERIES pumps in sizes 15 to 50 are available with a special ALMATEC draining system consisting of a bypass system in the side housings that can be activated easily either via hand-operated valves or




aoDD pumpsALMAteC

QUAttrOFLOW

Options

aodd pumps · aodd pumps air operated diaphragm pumps are a type of reciprocating diaphragm ... r...

Documents