Click to edit Master subtitle style

ANGRY BIRDZ

INTRODUCTION

Problem statement: Prelims: Shoot the balls through the rings. Knock out : Collapse the shown structures.

The structures will be similar as shown in the figure.

Grand Finale: Collapse structures so that eggs are not broken which are placed alongside.

If eggs are broken penalty points will be awarded.

PRELIMSRULES AND REGULATIONS:

a. Rings of different diameters b. BOT Should not CROSS marked linec. Time limit—2 minutesd. One ball should be projected at once.e. A total of 16 teams are selected for the knock out on the basis of

their points.f. No. of balls passing through the same ring shouldn’t exceed three.

Maximum height of stand = 100cms , minimum range of shooting = 115cms, Rings of variable diameters.

KNOCK OUT ROUND• RULES AND REGULATIONS:-

a.Limited time is given with limited no. of balls.b.Bot shouldn’t cross the marked line.c.Team will be penalised for breaking eggs.d.4 teams are selected for the finals on the basis of their points.

Similar Rules apply in the Final Round

KNOCK OUTLength = 250cms,breadth = 30cms,height = 100 cms.

.

GRAND FINALELength = 250cms,breadth = 30cms,height = 100 cms.

.

DIMENSIONS & FABRICATIONS• The bot should be fit in 20x20x30 (lxbxh)(cms) at any point of

event,which will be checked before event.

• The potential difference between any two points in the bot should not exceed 12 V and battery must be on board.

• Size of the ball will be as of the Standard table tennis ball(approx diameter = 40 mm).

• The machine shouldn’t exceed 5kg of weight.

• The structures are made up of light weight hollow boxes

General rules: • Violation in any of the given rules will lead to disqualification.• A team may consist of maximum 4 participants.• The event is open to all colleges in india and there is no

restriction on the number of teams from any given college.• The event organizers reserve the right to make modifications

to any rules if necessary and their decision in any situation is final and binding to all.