all trap primers fail choose the alternative - ips...
TRANSCRIPT
All Trap Primers FailChoose the AlternativeWATER FLOWS DOWN, BUGS, ODORS, & SEWER GASES STAY OUT
Plumbing installations including a trap primer can be expensive to install initially and often require
maintenance due to failure. When a trap primer fails, sewer gas, bugs, and unpleasant odors can
enter the building through the drain. Green Drains’ patented, easy to install design solves these
common issues as water can freely pass down through the Green Drain, but gases, bugs, and
odors are blocked by the one way seal. The Green Drain is an eco-friendly solution compared
to the expense and hassles associated with trap primers.
Scan the QR code to view our
Green Drain demo video
Available in 2”, 3”, 3-1/2” & 4”
Wa te r l e s s Tr a p Sea l f o r F l oo r D ra i n s
PMG 1312
500 Distribution Parkway, Collierville, TN 38017
PH: (800) 888-8312 | FX: (901) 853-5008
[email protected] | ipscorp.com/greendrains.com
GREEN DRAIN™ | Waterless Trap Seal for Floor Drains
PRODUCT FEATURES• Sewer odors often produce a foul smell in buildings from floor
drains. The Green Drain’s one-way valve eliminates those odors, and prevents the spread of dangerous bacterias that can cause potential health hazards while keeping the drain fully functional.
• Traditional floor drains could quickly become a doorway for pests such as flies, cockroaches and rodents. However, the Green Drain has a silicone skirt attached, preventing pests from getting in.
• Traditional drain trap primers need to be replaced often and are a pain to replace. The Green Drain takes mere seconds to install and also acts as a barrier trap protection device.
• Traditional drains require consistent chemical treatments as part of their maintenance. The Green Drain eliminates the need for chemical applications, making it better on the enviroment.
• Easy to install and easy to remove - No pliers needed.
• Requires no caulk or expensive installation tool.
• Saves a significant amount of time, water, costs and energy.
• The 3-½” fits in the barrel of most commercial cast iron drains for an easy retrofit into existing drains
These products are covered by one or more U.S. and foreign patents, including U.S. Patent No. 7900288 and 9027172
PR ODUCT DESCR IPT ION MODE L CASE QTY
69020 2” Waterless Trap Seal GD102 24
69030 3” Waterless Trap Seal GD103 24
69035 3-1/2” Waterless Trap Seal GD1035 24
69040 4” Waterless Trap Seal GD104 24
Traditional drains allow access for gases, bugs and odor if not regularly maintenanced.
Simply insert the proper size Green
Drain into the existing floor drain. Green
Drains can be used in most commercial
floor drains or directly into 2”, 3”, 3.5”,
or 4” pipe
With the Green Drain installed, water
flows down while bugs, odors, and
sewer gases stay out.
ABA015_RevB_102016
'ƌĞĞŶ��ƌĂŝŶ͗�tĂƚĞƌůĞƐƐ�dƌĂƉ�^ĞĂů�ĨŽƌ�&ůŽŽƌ��ƌĂŝŶƐ
^W��/&/��d/KE�^h�D/dd�>�^,��d
ϱϬϬ��ŝƐƚƌŝďƵƟŽŶ�WĂƌŬǁĂLJ��ŽůůŝĞƌǀŝůůĞ͕�dE�ϯϴϬϭϳ�භ�ϴϬϬ-ϴϴϴ-ϴϯϭϮ�භ�&�y͗�ϵϬϭ-ϴϱϯ-ϱϬϬϴ�භ�ǁǁǁ͘ŝƉƐĐŽƌƉ͘ĐŽŵ�භ�ƉůƵŵďŝŶŐΛŝƉƐĐŽƌƉ͘ĐŽŵ
Ö Product Code Model
"A" Pipe Size
Inch (mm)
"B"Height
Inch (mm)
GPM L/M
69020 GD102 2" (51) 2" (51) 12.0 45.469030 GD103 3" (76) 2" (51) 34.0 128.769035 GD1035 3 1/2" (89) 2" (51) 51.0 193.0
Flow Rate
:Žď�EĂŵĞ͗ �ŽŶƚƌĂĐƚŽƌ͗
:Žď�>ŽĐĂƟŽŶ͗ �ƉƉƌŽǀĂů͗
�ŶŐŝŶĞĞƌ͗ �ŽŶƚƌĂĐƚŽƌ͛Ɛ�WKη͗
�ƉƉƌŽǀĂů͗ ZĞƉƌĞƐĞŶƚĂƟǀĞ͗�
WD'�ϭϯϭϮ
^ƉĞĐŝĮĐĂƟŽŶƐ
· ^ĞƌŝĞƐ�ŝŶůŝŶĞ�ŇŽŽƌ�ĚƌĂŝŶ�ƚƌĂƉ�ƐĞĂů� · hs�ƌĞƐŝƐƚĂŶƚ���^�ƉůĂƐƟĐ�ĨƌĂŵĞ · ^ŝůŝĐŽŶ�ƌƵďďĞƌ�ƐĞĂůŝŶŐ�ŇĂƉƉĞƌ� · &ŽƵƌ�ŇĞdžŝďůĞ�ƐĞĂůŝŶŐ�ƌŝďƐ · �ŽŵƉůŝĞƐ�ǁŝƚŚ��^^��ϭϬϳϮ
&ƵŶĐƟŽŶ͗ hƐĞĚ�ŝŶ�ƚŚĞ�ŽƵƚůĞƚ�ĐŽŶŶĞĐƟŽŶƐ�ŽĨ�ŇŽŽƌ�ĚƌĂŝŶ�ďŽĚŝĞƐ͕�Žƌ�ƚŚĞ�ŝŶƐŝĚĞ�ŽĨ�ŇŽŽƌ�ĚƌĂŝŶ�ƐƚƌĂŝŶĞƌƐ�ƚŽ�ƐĞĂů�ƚŚĞ�ŽƉĞŶŝŶŐ�ƚŽ�ƉƌĞͲǀĞŶƚ�ŽĚŽƌƐ͕�ƐĞǁĞƌ�ŐĂƐĞƐ͕�ĂŶĚ�ŝŶƐĞĐƚƐ�ĨƌŽŵ�ĞŶƚĞƌŝŶŐ�ƵƉ�ƚŚƌŽƵŐŚ�ƚŚĞ�ŇŽŽƌ�ĚƌĂŝŶ�ŐƌĂƚĞ͘�dŚĞ�'ƌĞĞŶ��ƌĂŝŶ͛Ɛ�ĨŽƵƌ�ŇĞdžŝďůĞ�ƐŝůŝĐŽŶ�ƐĞĂůŝŶŐ�ƌŝďƐ�ĞŶƐƵƌĞ�ĞĂƐLJ�ŝŶƐƚĂůůĂƟŽŶ�ŝŶƚŽ�ŽƉĞŶŝŶŐƐ�ƚŚĂƚ�ŚĂǀĞ�ǀĂƌŝĂƟŽŶƐ�ŝŶ�ƐŝnjĞ͘�dŚĞ�'ƌĞĞŶ��ƌĂŝŶ�ǁŝůů�ŽƉĞŶ�ƚŽ�ĂůůŽǁ�ĚƌĂŝŶĂŐĞ�ĂŶĚ�ĐůŽƐĞ�ǁŚĞŶ�ƚŚĞƌĞ�ŝƐ�ŶŽ�ǁĂƚĞƌ�ŇŽǁ͘�dŚĞ�'ƌĞĞŶ��ƌĂŝŶ�ĐĂŶ�ďĞ�ƵƐĞĚ�ŝŶ�ĞŝƚŚĞƌ�ŶĞǁ�ĐŽŶƐƚƌƵĐƟŽŶ�Žƌ�ƌĞƚƌŽ-Įƚ�ĂƉƉůŝĐĂƟŽŶƐ�ǁŚĞƌĞ�ƚƌĂƉ�ƉƌŝŵĞƌƐ�ǁĞƌĞ�ŶĞǀĞƌ�ŝŶƐƚĂůůĞĚ͘
Đ
�KddKD�K&��K�z
h͘^͘�WĂƚĞŶƚ�ϳ͕ϵϬϬ͕Ϯϴϴ
dKW�K&�^dZ�/E�Z
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or acombination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of thesupplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth inthe characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the productacceptance by Authorities Having Jurisdiction.
This listing period is based upon the last date of the month indicated on the Effective Date and Void After Date shown above. Any change in material,manufacturing process, marking or design without having first obtained the approval of the Product Certification Committee, or any evidence ofnon-compliance with applicable codes and standards or of inferior workmanship, may be deemed sufficient cause for revocation of this listing.Production of or reference to this form for advertising purposes may be made only by specific written permission of IAPMO Research and Testing, Inc.Any alteration of this certificate could be grounds for revocation of the listing. This document shall be reproduced in its entirety.
The most updated information on this Certificate of Listing is available online at pld.iapmo.org
Effective Date: July 2016 Void After: July 2017
Product: Floor Drain Trap Seal Protection Devices File No. 9301
Issued To: Green Drain Inc335 N. Puente,Unit FBrea, CA 92821
Identification: Each device shall be permanently and legibly marked with the manufacturer's
name or trademark and the application designation (per Table 2 of ASSE
1072-2007). Product shall also bear the UPC® certification mark. Packaging
shall bear the manufacturer's name or trademark, model number or description
of the device, rating for type of floor, rated for grease-laden waste (if
applicable), and the floor drain size.
Characteristics: Barrier type floor drain trap seal protection devices. Installation
instructions shall not state or imply that the device may be used in lieu of
a trap primer. Product to be installed with other IAPMO R&T listed fittings,
in accordance with the manufacturer's instructions, and the requirements of
the latest edition of the Uniform Plumbing Code.
Products listed on this certificate have been tested by an IAPMO R&T
recognized laboratory. This recognition has been granted based upon the
laboratory's compliance to the applicable requirements of ISO/IEC 17025.
Page 2
Void After: July 2017
Product: Floor Drain Trap Seal Protection Devices File No. 9301
Issued To: Green Drain Inc
Products are in compliance with the following standard(s):
ASSE 1072-2007
Models:
Model No. Description GD-2 2" DrainGD-3 3" DrainGD-3.5 3.5" DrainGD-4 4" Drain
Page 3
Void After: July 2017
Product: Floor Drain Trap Seal Protection Devices File No. 9301
Issued To: Green Drain Inc
ADDITIONAL COMPANY INFO:
Liquid Breaker, LLC
Model No. DescriptionGD-102 2" DrainGD-103 3" DrainGD-1035 3.5" DrainGD-104 4" Drain
Page 4
Void After: July 2017
Product: Floor Drain Trap Seal Protection Devices File No. 9301
Issued To: Green Drain Inc
ICC-ES Report PMG-1312Reissued 02/2016
This report is subject to renewal 02/2017
EVALUATION SUBJECT:
FLOOR DRAIN TRAP SEAL PROTECTION DEVICES
DIVISION:
22 00 00—PLUMBING SECTION:
22 13 16—SANITARY WASTE AND VENT PIPING
Report Holder:
GREEN DRAIN, INC. 335 N. PUENTE STREET
BREA, CA 92821
Listings are not to be construed as representing aesthetics or any other attributes not specifically addressed, nor are they to be construed as an endorsement of the subject of the listing or a recommendation for its use. There is no warranty by ICC Evaluation Service, LLC, express or implied, as to any finding or other matter in this listing, or as to any product covered by the listing. Copyright © 2016 ICC Evaluation Service, LLC. All rights reserved. Page 1 of 2
ICC-ES PMG Listing PMG-1312 Effective Date: February 2016 This listing is subject to re-examination in one year.
www.icc-es-pmg.org | (800) 423-6587 | (562) 699-0543 A Subsidiary of the International Code Council®
CSI: DIVISION: 22 00 00—PLUMBING Section: 22 13 16—Sanitary Waste and Vent Piping
Product certification system:
The ICC-ES product certification system includes testing samples taken from the market or supplier’s stock, or a combination of both, to verify compliance with applicable codes and standards. The system also involves factory inspections, and assessment and surveillance of the supplier’s quality system.
Product: Floor Drain Trap Seal Protection Devices
Listee: Green Drain Inc. 335 N. Puente Street Brea, CA 92821 www.greendrains.com
Compliance with the following codes: 2015, 2012, 2009 and 2006 International Plumbing Code® (IPC) 2015, 2012, 2009 and 2006 International Residential Code® (IRC) 2015, 2012, 2009 and 2006 Uniform Plumbing Code® (UPC)* 2010 and 2005 National Plumbing Code of Canada® **
*Uniform Plumbing Code is a copyrighted publication of the International Association of Plumbing and Mechanical Officials **National Plumbing Code of Canada is a copyrighted publication of National Research Council Canada
Compliance with the following standards:
ASSE 1072-2007, Performance Requirements for Barrier Type Floor Drain Trap Seal Protection Devices, American Society of Sanitary Engineering CSA B79-2008 (R13), Floor, Area and Shower Drains, and Cleanouts for Residential Construction ICC-ES LC1015, PMG Listing Criteria for Elastomeric, Normally Closed, Floor Drain Evaporation Resistant Sealing System (Oct 2010)
Identification:
The product and/or package must bear the manufacturer’s name, the model number and the ICC-ES PMG listing mark.
Installation: The Green Drain Inc. trap primer alternates are to be installed in accordance with the manufacturer's instructions and the applicable code.
PMG-1312 | Most Widely Accepted and Trusted Page 2 of 2 Models:
MODEL
Device SIZE FLOW RATE
Inches mm DN GPM L/M
GD102 2 40 12.0 45.4GD103 3 50 34.0 128.7
GD1035 31/2 80 51.0 193.0 GD104 4 100 73.0 276.3
Conditions of listing:
1. The Green Drain Inc.devices, recognized by this listing, are intended to serve as alternates to the code- required trap primer. They must serve a functioning trap.
2. The plumbing systems must be installed in accordance with the applicable codes. 3. The “Device” must be accessible. 4. The Green Drain Inc.trap primer alternates are manufactured in Xiamen, China under a quality
control program with annual surveillance inspections.