airplay upgrade instructions — -...

Download AirPlay Upgrade INSTRUCTIONS — - rightlef/images/stories/marantz/products/.../na700  ceive email

Post on 16-Jul-2018

225 views

Category:

Documents

3 download

Embed Size (px)

TRANSCRIPT

  • AirPlay upgrade applies to the following models:

    1. SR7005 AV Receiver 2. AV7005 AV Pre-Amplifier 3. CR603 Stereo Mini Component 4. NA7004 Network Audio Player Purchase price of the AirPlay upgrade is $60.00 AUD. A separate upgrade must be purchased for each Marantz component owned. Only units purchased in Australia from authorized Marantz dealers can be upgraded.

    1. Check all Firmware:

    Check firmware versions on all devices and upgrade them if needed. New firmware will almost certainly be required. iPod Touch / iPhone / iPad: iOS 4.2.1 or later iTunes: Version 10 or later Marantz component: Firmware issued after 15 / 12 / 2010. (For reliability, use cable connection to internet for any firmware upgrades to Marantz components.) NA7004 / CR603: Menu > Other > Firmware Update

    2. Gather information:

    Checklist of information required to purchase AirPlay: 1. Model Number (E.g. SR7005, AV7005, CR603 or NA7004) 2. Colour of unit (Black or Silver/Gold) 3. Serial Number (located on the back of the unit or on the carton) 4. MAC Address (located on the back of the unit, or in the menu system) 5. Upgrade ID.

    The 12 digit Upgrade ID will be displayed after firmware update is completed.

    6. Preferred credit card details (Only VISA or MasterCard accepted card number and expiry date) 7. Purchase receipt (with date of purchase, store name and store address clearly visible)

    3. Fax or emailyour information to QualiFi:

    Fax the completed form (page 2 of this PDF) to QualiFi with your purchase receipt. You will be notified by email as soon as your AirPlay registration has been successful. You will also re-ceive email PDF addendums for your Marantz components User Guide (Owners Manual), which will give you instructions for operating AirPlay.

    4. Upgrade to AirPlay:

    After receiving your email notification, go into your Marantz component and perform the up-grade to AirPlay. Detailed instructions are on following pages. NA7004 / CR603: Press ENTER/MEMO twice; Use the down arrow to select Upgrade; use the down arrow to select Yes then press ENTER/MEMO. Upgrades may take 30 minutes or more to install.

    AirPlay Upgrade INSTRUCTIONS

    QualiFi Pty Ltd ABN 084 617 167

    24 Lionel Road Mt Waverley VIC 3149

    Page 1

  • Your Name:

    Your Address:

    Your Email Address:

    Store Name & Address:

    Model Purchased (tick one):

    SR7005 AV7005 NA7004 CR603

    Colour (tick one): Black Silver/Gold

    Upgrade ID number:

    Serial Number:

    MAC Address:

    Card type (tick one) and number:

    VISA MCARD Card number:

    Expiry Date:

    Name as printed on card:

    Please read: 1. The AirPlay upgrade is only available for units purchased in Australia from author-ized Marantz dealers.

    2. AirPlay must be purchased separately for each AirPlay capable component owned. 3. The cost to upgrade is $60.00 AUD including GST per component. 4. Please use a separate registration form for each Marantz AirPlay product you wish to

    register. 5. Make sure all details are accurate and complete, then fax this form together with

    a copy of your purchase receipt to QualiFi on:

    Fax to (03) 9543 8641 or email to: sales@qualifi.com.au

    Your signature: (Completing and signing this form means you accept a $60.00 AUD charge for the AirPlay upgrade)

    Date Of Purchase:

    QualiFi Pty Ltd ABN 084 617 167

    24 Lionel Road Mt Waverley VIC 3149

    AirPlay Upgrade Request

    (Please print clearly using only a black or blue pen)

    Page 2

    Should you prefer not to email your credit card details for security reasons, please sign and email this form, then phone your card details thru to QualiFi on (03) 8542 1111

  • AirPlay Software upgrade procedureM-CR603NA7004ENGLISH

    1

    Follow the next three steps to perform AirPlay upgrade.

    STEP 1 : Updating the firmware to the latest version.

    STEP 2 : Obtaining upgrade ID. (This ID is required when purchasing/registering the upgrade.)

    STEP 3 : Performing registration and upgrade.

    NOTEAn Internet connection is required for the AirPlay upgrade.

    STEP 1 : Firmware updateUpdate your unit to the latest version.

    1 Press ON/STANDBY. When the unit is turned ON, it is automatically

    connected to the network. To ensure the successful upgrade, wait for 2 minutes or more before proceeding to Step 2.

    2 Press MENU.The unit enters the menu setting mode and the menu is shown in the display.

    (M-CR603) (NA7004)

    1/6TimerClock

    [Menu] 1/4NetworkOther

    [Menu]

    (M-CR603) (NA7004)

    3 Use i to select Other, then press ENTER/MEMO.1/6

    Auto StandbyScreen Saver

    [Other] 1/5Auto StandbyScreen Saver

    [Other]

    (M-CR603) (NA7004)

    4 Use i to select Firmware Update, then press ENTER/MEMO.1/3

    Check for UpdateStart

    [Firmware Update] 1/3Check for UpdateStart

    [Firmware Update]

    (M-CR603) (NA7004)

    5 Select Check for Update, then press ENTER/MEMO.Check if your firmware is the latest one.

    (1) Update Available : go update 0: return

    [Check For Update]

    (M-CR603/NA7004)

    (1) : New firmware is available. (2) : The latest firmware has already been installed.

    In this case, press o repeatedly to exit menu, and go to STEP 2-1 (vpage2).

    (2) Latest Firmware0: return

    [Check For Update]

    (M-CR603/NA7004)

    6 Press ENTER/MEMO.Proceed to the next screen.7 Use i to select Yes, then press ENTER/MEMO.The update starts.

    Yes----------------------------------------------

    [Firmware Update]

    AuthenticatingDo not unplug AC power cord duri...

    [Firmware Update]1/4

    1 min 50%System

    [Updating]

    (M-CR603/NA7004)

    Do not turn the unit OFF or disconnect the power cord until the update is completed. When the firmware update is completed, the light of the display is turned OFF and the unit restarts

    automatically.

    NOTE If updating fails, the set automatically retries, but if updating is still not possible, one of the messages

    shown below is displayed. If the display reads as shown below, check the settings and network environment, then update again.

    Display DescriptionUpdating fail Updating failed.Login failed Failure to log into server.Server is busy Server is busy. Wait a while then try again.Connection fail Failure in connecting to server.Download fail Downloading of the firmware has failed.

    Even with a broadband connection to the Internet, approximately 20 minutes is required for the updating/upgrading procedure to be completed.

    Once updating/upgrade starts, normal operations on this unit cannot be performed until updating/upgrading is completed. Furthermore, updating/upgrading the firmware may reset the backup data for the parameters, etc. set for this unit.

    If the update or upgrade fails, remove and re-insert the power cord. Update retry appears on the display and update restarts from the point at which update failed. If the error continues despite this, check the network environment.

    Page 3

  • AirPlay Software upgrade procedureM-CR603NA7004ENGLISH

    1

    Follow the next three steps to perform AirPlay upgrade.

    STEP 1 : Updating the firmware to the latest version.

    STEP 2 : Obtaining upgrade ID. (This ID is required when purchasing/registering the upgrade.)

    STEP 3 : Performing registration and upgrade.

    NOTEAn Internet connection is required for the AirPlay upgrade.

    STEP 1 : Firmware updateUpdate your unit to the latest version.

    1 Press ON/STANDBY. When the unit is turned ON, it is automatically

    connected to the network. To ensure the successful upgrade, wait for 2 minutes or more before proceeding to Step 2.

    2 Press MENU.The unit enters the menu setting mode and the menu is shown in the display.

    (M-CR603) (NA7004)

    1/6TimerClock

    [Menu] 1/4NetworkOther

    [Menu]

    (M-CR603) (NA7004)

    3 Use i to select Other, then press ENTER/MEMO.1/6

    Auto StandbyScreen Saver

    [Other] 1/5Auto StandbyScreen Saver

    [Other]

    (M-CR603) (NA7004)

    4 Use i to select Firmware Update, then press ENTER/MEMO.1/3

    Check for UpdateStart

    [Firmware Update] 1/3Check for UpdateStart

    [Firmware Update]

    (M-CR603) (NA7004)

    5 Select Check for Update, then press ENTER/MEMO.Check if your firmware is the latest one.

    (1) Update Available : go update 0: return

    [Check For Update]

    (M-CR603/NA7004)

    (1) : New firmware is available. (2) : The latest firmware has already been installed.

    In this case, press o repeatedly to exit menu, and go to STEP 2-1 (vpage2).

    (2) Latest Firmware0: return

    [Check For Update]

    (M-CR603/NA7004)

    6 Press ENTER/MEMO.Proceed to the next screen.7 Use i to select Yes, then press ENTER/MEMO.The update starts.

    Yes----------------------------------------------

    [Firmware Update]

    AuthenticatingDo not unplug AC power cord duri...

    [Firmware Update]1/4

    1 min 50%System

    [Updating]

    (M-CR603/NA7004)

    Do not turn the unit OFF or disconnect the power cord until the update is completed. When the firmware update is completed, the light of the display is turned OFF and the unit restarts

    automatically.

    NOTE If updating fails, t