air quality instruments - concept · pdf fileair quality instruments handheld ... haz-scanner...

201www.conceptcontrols.com

AIR QUALITYINSTRUMENTS

201

Handheld AnamometersAnemomaster LITE 6006 202Compact and Lightweight Hotwire Anemometer 202Anemomaster Professional / Standard 6036/6035 202Climomaster 6501 203Anemomaster 6812, 6813, 6815 204Anemomaster 6113 204TABmaster 6710 205Anemomaster 6162 205

Multi-Channel Measuring Instruments4 Channel Anemomaster 1570 206Multi-Channel Anemomaster 1550 & 1560 206

IAQ & Environmental MonitorsHandheld IAQ Monitor 2211 207Thermohygrometer Model 6841 207Handheld Odor Monitor OMX 208Air Aide AA-3500 208EVM Environmental Monitors 209HAZ-SCANNER Indoor Environmental Monitoring Station 210HAZ-SCANNER Wireless Environmental Perimeter Air Station 211 Ambient Air Quality Monitor AQM60 212

Particle & Dust MonitorsHandheld Laser Particle 213Counter 3887 213Handheld Laser Particle Counter 3886 GEO-α 213Portable Particle Counter 3910 214Handheld Condensation Particle Counter 3800 214HAZ-DUST IV Particulate Monitor 215HAZ-DUST Real-Time Particulate Monitor 215EPAM 5000 216EPAM 7500 216Digital Dust Monitor 3443 216HAZ-DUST VDM-7500 217Piezobalace Dust Monitor 3521 / 3522 217Dust Sentry 218Portable Aerosol Mobility Spectrometer (PAMS) 218

AIR QUALITY

202 www.conceptcontrols.com

Anemomaster LITE 6006Compact and Lightweight Hotwire Anemometer

Features:• Broad measurement range• Detachable probe for zero

downtime calibration or replacement

• Temperature compensation circuit for high accuracy

• Display readings in both metric and imperial units

• Compact and extremely durable• Low price, Kanomax quality

throughout• Highly accurate, long-life

Platinum sensor• Single button multi-function switch for easy one-hand

operation of power on/off, set time constant, read temperature, hold result

Specifications:

Air

Velo

city

Range 2 to 3,940 fpm (0.01 to 20.0m/s)

Accuracy +/- 5% of reading or +/- 0.015 m/s whichever is greater

Response Time Less than 1 second at 196 fpm (1m/sec), 90% response

Resolution 0.01 m/s (@ 0.01 to 9.99 m/s)

Air

Tem

pera

ture

Range 0.1 m/sec (@10.0 to 20.0 m/s)

Accuracy -4 to 158°F (-20 to 70°C)

Response Time +/-2°F (1°C)

Resolution Less than 30 seconds at 196 fpm (1 m/sec), 90% response

Power Supply 0.2 F (0.1 C)

Battery Life 4 x AA batteries

Operating Environment

Main Unit 41 to 104°F (5 to 40°C)

Probe -4 to 158°F (-20 to 70°C)

Storage Environment 14 to 122°F (-10 to 50°C) Dimensions

Main Unit 2.4"(60mm) x 4.7"(120mm) x 1.2"(30mm)

Probe Probe: 0.24" or 0.40"(6 or 10mm) diameter x 7.9"(200mm) lengthProbe cable: 0.13”(3.3mm) diameter x 59”(1,500mm) length

Weight 0.4 lbs (180 g)

Accessories Operation Manual, AA Batteries, Extension Rod, Carrying Case, NIST Certificate

Options Spare Probe

HandHeld anamometers

Anemomaster Professional / Standard 6036/6035Features:

• Simultaneously measures and displays air velocity and air temperature

• Telescopic articulating probe makes it easy to take traverse measurements at ceiling ducts and other hard to reach places

• Datalogging function with storage capacity of up to 1500 records which allows users to work longer before pausing to upload data to a PC. (Model 6036)

• USB connection, easy to upload to your PC or laptop. (Model 6036)

• Highly Visible blacklit display• The new Anemomaster offers an optional hands-free case

that can be comfortably worn by the contractor

Specifications:

Model Model 6036 Model 6035Probe Type Telescopic and

Articulating TipTelescopic

Air Velocity Range 2 to 6,000 FPM (0.01 to 30.0 m/s)

Accuracy +/- 3.0% of reading or 0.015 m/s whichever is greater

Volumetric Flowrate

Imperial 9031 CFM (at 20 FPM)2,709,360 CFM (at 6000 FPM)

Metric 2,341 m3/s (at 0.1 m/s)702,270 m3/s (at 30.0 m/s)

Duct Size 0 to 2550 mm0 to 255 inches

Temperature Range -4 to 158°F (-20 to 70°C)

Accuracy +/- 1°F or +/- 0.5°C

Differential Pressure option

Range -5.00 to +5.00 KPa

Accuracy +/- (3.0 % of reading +/- 0.01) KPa

Interface Digital USB and RS232C (for print-out)

RS232C (for print-out)

Analog option

DC 0 to 3 V (only for air velocity measurements)

Data Storage Capacity Up to 1500 records

n/a

Power Supply 6 x AA Batteries or AC Adapter

Standard Accessories Carrying Case, Operation Manual, AA Batteries, AC AdapterNIST Certificate

Options Analog Output, Pressure sensor option, Portable Printer, Printer Cable, Rolled Paper for printer

NEWNEW


Climomaster 6501Most Accurate Hot-Wire Anemometer of its Kind

Features:• Probe Compatibility feature allows you to have spare probes• Automatic Flow Rate Calculation function• USB connection to PC• Large data storage, stores up to 20,000 measurements• Differential Pressure available as an option• One probe simultaneously measures air velocity, air temperature, relative humidity, and airflow rate• 7 different detachable probes available, including a low air velocity, omni-directional probe• Detachable probes allow you to share the main unit or the probes• Optional Software displays real-time measurements in table, graphic, and spreadsheet formats

Specifications:

Model 6531 6541 6542 6551 6552 6533 6543 6561Air Velocity Range 20 to 6000 fpm (0.10 to 30.0 m/s) 10 to 1000 fpm 20 to 9840

fpm (0.05 to 5.00 m/s) (0.1 to 50

m/s)Accuracy +/- (2% of reading +/- 0.0125) m/s

Air Temperature Range -4 to 158°F (-20 to 70°C)Accuracy +/- 1°F (+/- 0.5 °C)

Relative Humidity Range 2 to 98%RH (Model A531, A533)Accuracy +/- 2 %RH

Differential Pressure(Option)

Range -5.00 to +5.00 kPaAccuracy +/- (3% of reading +0.01) kPa

Output Digital USBAnalog DC 0 to 1 V (Option)

Datalogging Stores up to 20,000 measurement dataPower Supply 6 x AA Batteries / AC Adapter (100 to 240 V)Weight 0.9 lbs (400 g)Standard Accessories Carrying Case, Operation Manual, AA Batteries, 2m Probe Cable, NIST CertificateOption Spare Probes, Analog Output, Pressure Sensor, Extention Rod Printer, Printer Cable, PC Communcation Cable,

Windows Software, AC Adapter

Probe Options:

Probe 6531 6541 6561 6542 6533 6543 6551 6552Probe Tip

Applications HVAC Testing, IAQ Investigation

HVAC Testing High Velocity Applications

HVAC Testing, Manufacturing

Process Control

Cleanroom Certification, HEPA Filter

Performance Testing,

Turbulent Air Testing

Cleanroom Certification, HEPA Filter

Performance Testing,

Turbulent Air Testing

Heat Sink Cooling

Efficiency Testing, Airflow Measurements in tight spaces

Heat Sink Cooling

Efficiency Testing, Airflow Measurements in tight spaces

NEW

HANDHELD ANAMOMETERS

AIR QUALITY


Anemomaster 6812, 6813, 6815Rotating Vane Anemomasters

Features:• HVAC Testing• IAQ Investigations• Industrial Hygiene• Cleanroom Testing• Display switchable in m/s (MPS)

or ft/min (FPM) forair velocity and cubic ft/min (CFM) or cubic metre/hr (CMH) for calculated air volume flow. Very high accuracy due to use of microprocessor digital memory for maximum and minimum values

• Average measurements over two or sixteen seconds for air velocity

• Display hold for easy reading of measurements• Long battery life

Specifications: Model 6812 6813 6815 Air Velocity Probe AP275 40 to 7800 FPM (0.2 to 40 m/s)

Probe AP100 60 to 6800 FPM (0.3 to 35 m/s) Accuracy ±1.0% of Reading ±1 digit Resolution 1 FPM or 0.01 m/s

Temp. Air Velocity Probe

- -22 to 212 F (-30 to 100C)

Optional Temp Probe

- -139 to 392 F (-95 to 200C)

Accuracy - ±0.3o±0.2% of Reading in oF

Resolution - 0.1 F or 0.1o(1 F below -99.9 F)

Relative Humidity

Range - 5.0 to 95.0 %RH

Accuracy - ±2.0 %RH Resolution - 0.1 %RH

Display 0.5 inch LCD, 4 digits with LED Backlight

Operating Temp.

Instrument: 32 to 125F (0 to 50C)

Probe: -4 to 212F (-20 to 100C) Power Supply 3 AA Alkaline Batteries Operating Time (Battery)

Approximately 150 hours

Dimensions Instrument W 3.2 x D 1.5 x H 6.5 inches (8.2 x 3.8 x 16.5 cm)

Probe AP275 2.75 inch diameter Probe AP100 1.00 inch diameter RH/Temp Probe

- 6 inch x 1 inch diameter

Standard Accessories 1 x Rotating Vane Probe Head, your choice of AP275 or AP100 3 x AA 1.5V Alkaline Batteries, Operation Manual,

Carrying Case Extension Rod w/ Handle Grip, Flexible Rod HTP 201

combination RH / Temp Probe (avail. for 6815)

Anemomaster 6113Multi-Function Thermal Anemometer

Features:• Probe Compatibility feature

allows utilization of a spare probe

• Simultaneously measures air velocity, temperature, and pressure measurements

• Large, easy-to-read LCD• Quick printing of measurements at site• Simple operation with buttons for printing and calculation• Easily keeps record of measurements• Suitable for measurements inside ducts

Specifications:

Air Velocity Range 20 to 9840 fpm (0.10 to 50.0 m/s) Accuracy +/-(3% of reading +20fpm (0.1m/s))

Air Temp. Range 32 to 212ºF (0 to 100ºC) Accuracy +/-2.0ºF (1.0ºC)

Pressure (Option)

Range -5.00 to +5.00kPa Accuracy +/-(3% of reading +0.01)kPa

Measuring Functions

Settings Display hold, time constant setting (1, 5, or 10 sec.), remaining battery life (5 steps), measuring unit setting (m/s, fpm, Celsius, Fahrenheit, kPa).

Data Storage Instantaneous storage, average (over 60 sec max), Storage 100 max

Calculation Max. and min. values, averaging, raw data display

Display Calendar function, air velocity bar graph display

Outputs Digital Output

RS-232C (4800, 9600, 19200, 38400bps) for communication w/ PC

Printer Output

Printing calculation results and measurements

Analog Output (Option)

DC 0 to 1V (1ch. Selected from air velocity, temp. and pressure)

Power Supply 6 × 1.5 volt C cells (Mn, alkaline, or Ni-Cd)

Battery Life 10 hours continuous operation (with alkaline batteries, at 5m/s, 20ºC, without printer use)


Main Body 41 to 104ºF (5 to 40ºC) Probe 32 to 212ºF (0 to 100ºC)

Storage Environment 41 to 104ºF (5 to 40ºC) Weight (incl. batteries) Approx. 2.2 lbs (Approx. 1000 g) Dimensions 7.9”x5.9”x3.9” (200x150x100mm) Standard Kit 1 x operation manual, 6 x 1.5V Mn C

cells, 1 x probe with 2-meter (6.6-feet) cable, 1 x extension rod, 1 x shoulder strap

Optional Accessories Spare Probe, Analog Output, Pressure Measurement, Printer Paper, Communication Cable, Data Management Software, AC Adapter


HANDHELD ANAMOMETERS

Anemomaster 6162Middle and High Temperature Anemometer

Features:• Simultaneous display of air velocity

and temperature• Improved response time by the

addition of secondary temperature compensation circuit

• Easy review of time history by graphic display• Memory function of maximum 999 separate measurement

data• RS-232 C serial interface for connection to PC. Analog

output, and remote control terminal equipped• Probe Compatibility feature allows you to change the

probe easily

Specifications:Model Probe Model 0203

(for middle temp) 32-392oF (0-200oC)

Probe Model 0204 (for high temp)

32-752oF (0-400oC) Measuring Range

40-9840fpm (0.2-50m/s): 32-212oF (0-100oC) 80 .9840fpm (0.4-50m/s): 212-392oF (100-200oC)

-- 138-9840fpm (0.7-50m/s): 392-572oF (200-300oC)

--197-9840fpm (1.0-50m/s): 572-752oF (300-400oC)

Measuring Accuracy

Air velocity: +/-3%F.S. Air temperature: +/-(1%rdg+1oC)

Temp. Compensation Accuracy (Air Velocity)

Less than 984fpm (5m/s): +/-10%F.S. 984fpm(5m/s) to 9,840fpm(50m/s): +/-6%F.S.

Less than 984fpm (5m/s): +/-15%F.S. 984fpm(5m/s) to 9,840fpm(50m/s): +/-10%F.S.

Heat-resistance of Cable

Teflon coating (Probe side): 392oF (200oC) Vinyl code (Extension cable): 176oF (80oC)

Length of Cable

Teflon coating 4.9ft (1.5m) Vinyl code 16.4ft (5m)

Teflon coating 7.5ft (2.3m) Vinyl code 32.8 (10m)

Extension Rod (Option)

0.65”(MAX)x31.5” (16.5x800mm)

0.87”(MAX)x81.5” (22x2070mm)

Probe Dimensions

Dimension: φ0.43”x8.2” (11x208mm)

Dimension: φ0.43”x39.4” (11x1000mm)

Display Digital (simultaneous display of air velocity and temp) Input/output Terminal

Remote terminal: START/STOP key Analog output terminal: Output voltage 0 . 1 V, Output

impedance 47. Digital output terminal: RS-232C (serial interface)

Power Supply Dry battery drive: US type (1.5V x 6 pcs = 9V), Alkaline battery, Mn battery AC adapter: 12.5V, 450mA

(AC100V +/- 10%, 50/60Hz) Operating Temp.

41-104oF (5-40oC)

Battery Life Approx. 8 hours Dimensions 8.7” x 3.3” x 5.9” 220 x 85 x 150 mm Weight Main body: Approx. 4.0lbs (1.8kg), Probe Model 0203:

7.1oz(200g), Model 0204: 17.6oz (500g)

TABmaster 6710Capture Hood

The TABmaster is the perfect tool for accurate supply and return airflow measurements. Interchangeable hoods make it a snap to sample the air for any duct size. The unit is lightweight and easy to handle.The full colour screen can be tilted so it’s always at the optimal viewing angle regardless of height.

Features:• 23 to 2500 cfm (40 to 4250 m3/h) range• Simultaneously measures and displays air flow,

temperature and humidity• Displays the direction of the airflow as well as the velocity• Store up to 3,000 measurements• Advanced storage feature allows you to store multiple

measurements under a single ID#• Easy one-person setup and use• Five hood sizes make it easy to pick one that fits your duct• Built-in back pressure compensation ensures accuracy for

large volumetric flow measurements• Competitive economic price with professional-grade

features

Specifications:

Airflow Measuring Range 23 to 2500 CFM (40 to 4250 m3/h)

Accuracy 3% of measuring +/- 10 m3/h

Resolution 1 m3/h

Temperature Measuring Range 32 to 122°F (0 to 50°C)

Accuracy +/- 1°F (0 to 50°C)

Resolution 0.1°C

Humidity Measuring Range 0-100% RH

Accuracy +/- 3.0 %RH

Resolution 0.1 %RH

Standard Hood Dimensions 610x610mm

Optional Hood Dimensions 610x1220mm, 305x1220mm, 500x500mm, 915x915mm, 915x610mm

Power Supply 4 x AA batteries or AC Adapter

Weight & Dimensions 7.9 lbs (3.6 kg), Main Body: 3.4" x 7.4" x 1.6"

NEW

AIR QUALITY


multi-CHannel measuring instruments

Multi-Channel Anemomaster 1550 & 1560Real-Time Air Quality Monitoring System

Features:• One unit of Model 1550 has 64 Channels for air velocity• For a larger system, connect up to 5 units in a cascade

and add a computer for control• Up to 320 channels of measuring points• Flexibility in system configuration means greater freedom,

simplicity, and efficiency in measurement

Specifications:

Model 1550 1560Display LCD (with backlight) simultaneously displays on a

module basis

MAN: Select modules by operating the UP/DOWN switches

AUTO: Automatically selects modules every 2 seconds to display data

Functions Burst Mode: Transfers data of all channels at high speed

Channel Mode: Transfers data of the specific channel only

Data Selection: Outputs instantaneous values every specified sampling time, and outputs the

average

Interface Data transfer: RS232C (standard)

Extended RS232C (optional)

GP-IB (optional)

Baud Rate: 300, 600, 1200, 2400, 4800, 9600, 19200bps (selectable)

Printer output: Centronics

Dimensions 16.9” x 19.6” x 5.5” (430 x 500 x 140 mm)

8.9” x 12.8” x 5.5” (226 x 325 x 140mm)

Weight Approx. 22lbs (10kg) Approx. 11lbs (5kg)

4 Channel Anemomaster 1570Features:

• 4CH simultaneous measurement in a compact body• Wide probe selection available for various applications• Can take measurements at high-time-resolution (0.1 sec)• RS232C terminal for data logging• Channel display can be switched by the touch of a button• Probe compatibility saves downtime and shipping cost• Windows software gives you simultaneous measurement

on air velocity and flow rate• Measurement data saved in text format for easy

processing using other software such as Excel

Main Body Specifications:

Display LCD display Data Transfer Burst Mode Transfers data of all channels

Channel Mode Transfers data of specific channel only

Software Function

Instant Mode Displays instantaneous values every specified sampling time

Average Mode Displays average values of a specified sampling time

Output Digital RS 232C (Baud rate 9600bps fixed)

Analog 0-5 V Main Body Operation Temp. 41-104ºF (5-40ºC) External Dimensions 7.8” x 10.2” x 2.8” (200 x 260

x 70mm) Weight 5.7 lbs (Approx. 2.6 kg) Power Supply AC 85V – 276V 50Hz/60Hz Standard Kit RS-232 cable, Power cable,

2xFuse, Data Processing Software

Probe Specifications:Model 0962-00 / 0963-00 0964-01 / 0964-02 0965-00 to -08

Measuring Range & Accuracy

20-1000fpm: +/-20fpm

20-1000fpm: +/-30fpm

20-1000fpm: +/-30fpm

(0.1-4.99m/s: +/-0.1m/s)

(0.1-4.99m/s: +/-0.15m/s)

(0.1-4.99m/s: +/-0.15m/s)

1000-2000fpm: +/-40fpm

1000-2000fpm: +/-60fpm

1000-2000fpm: +/-60fpm

(5.00-9.99m/s: +/-0.2m/s)

2000-5000fpm: +/-100fpm

(5.00-9.99m/s: +/-0.3m/s)

2000-5000fpm: +/-150fpm

(5.00-9.99m/s: +/-0.3m/s)

2000-5000fpm: +/-120fpm

(10.0-24.9m/s: +/-0.5m/s)

(10.0-24.9m/s: +/-0.75m/s)

(10.0-25.0m/s: +/-0.6m/s)

5000-10000fpm: m+/-200fpm

5000-10000fpm: m+/-300fpm

(25.0-50.0m/s: +/-1.0m/s)

(25.0-50.0m/s: +/-1.5m/s)

Temp Comp 41 – 176ºF (5 – 80ºC) Response Time

Approx. 1 sec Approx. 3 sec Approx. 7 sec


Handheld IAQ Monitor 2211Features:

• Simultaneously measures and data logs multiple parameters such as: CO, CO2, temperature, relative humidity, to monitor indoor air quality conditions

• Calculates Dew Point, Web Bulb Temperature, Absolute Humidity, Humidity Ratio and % Outside Air

• Built-in memory allows user to store multiple point measurements. Equipped with RS232C terminal

• Easy user calibration with built-in calibration function• Capable to continuously monitor parameters via PC• Large LCD shows multiple parameters at a glance

Specifications:

CO Range 0 to 500PPM

Accuracy +/-3% of reading or +/-3PPM whichever is greater

Resolution 0.1PPM: 0-99PPM 1PPM: 100-500 PPM

CO2 Range 0 to 5000PPM

Accuracy +/-3% of reading or+/-50PPM whichever is greater

Resolution 1PPM

Temp. Range - 4 to 140F (-20 to 60C)

Accuracy +/- 1F (+/-0.5C)

Resolution 0.1F (0.1C )

Relative Humidity

Range 2 to 98%RH

Accuracy 2 to 80%RH:±2%RH, 80 to 98%RH:±3%RH

Resolution 0.1%RH

Function Normal Mode Normal measuring (do not store and calculate the data). Relative humidity, CO, CO2, Dew point, Wet bulb temperature, Absolute humidity and Humidity Ratio.

Calculation Mode

Store the data, and calculate the maximum, minimum and average value.

% OA Mode Measure ventilation ratio (Ask for ventilation ratio by calculating from temperature and CO2 value).

Data Output Mode

Perform re-calculation of stored data and output of data to PC and Printer.

Calibration Mode

Perform the calibration of CO and CO2.

Output Digital RS232C

Analog (option)

DC 0 to 1V

iaQ & environmental monitors

Thermohygrometer Model 6841Features:

• Ultralight and palm-size• Easy to use (Select

temperature, humidity, or power on/off)

Specifications:

Measuring Object Clean airflow

Measuring range Temperature -4 to 113ºF (-20 to 45ºC)

Humidity 5 to 95%RH

Display resolution Temperature 0.1ºF or 0.1ºC

Humidity 0.1%RH

Accuracy Temperature +/-0.9ºF (+/-0.5ºC)

Humidity +/-3%RH

Responsiveness 30 sec

Measuring Function Conversion between ºF and ºC

Dimension Main Unit Approx. 2.4” x 4.7” x 1.3” (60 x 120 x 34mm)

Probe Approx. φ19 x 170mm

Cable Approx. φ3.3 x 1.5m

Power Supply AAA Battery x 4 (Mn, Alkaline, or Ni-Cd)


Main Unit 41 to 104ºF (5 to 40ºC)

Probe -4 to 113ºF (-20 to 45ºC)

Storage Temperature

14 to 122ºF (-10 to 50ºC)

Weight (including batteries) Approx. 6.3oz (180g)

Accessories Operation Manual, AA batteries

Options Carrying Case

IAQ & ENVIRONMENTAL MONITORS

AIR QUALITY


Air Aide AA-3500Handheld Odor Monitor OMXFeatures:

• Numerical value for relative strength of smell

• Numerical value for classification of smell

• Handheld odor meter is ideal for before and after applications, such as air purification and cleaning service.

• Real-time sampling mode displays odor change continuously

• Memory sampling mode saves data based on the selected sampling rate. (up to 32732 data, 511 files)

• Battery operated with 7 hrs continuous usage

Specifications:

Model OMX-SRM OMX-ADM OMX-TDMDetection Method

Two Semiconductor Gas Sensors

Sampling Method

Continuous Sampling with Built-in Air Pump

Object Gas Ethanol, Acetone,

Hydrogen, etc

Hydrogen Sulfide, Methyl

Mercaptan, Ammonia, etc

TVOC (Toluene), etc

Odor Strength Level

0.0 to 999 0 to 999 0.0 to 9999 (µg/m3)

Classification Class 0 to 90 Odor Intensity 2.5 to 5.0

n/a

Power Supply 4 x AA batteries or AC adaptor *Battery life for continuous measurement is approx. 7 hours

Memory Capacity

Up to 32732 data

Storage Temperature

0 to 40 ºC (32 to 104 ºF) * No condensation

Operating Temperature

-10 to 50 ºC (14 to 122 ºF) * No condensation

Dimensions 74 (W) x 167.5 (L) x 35 (H) mm

Weight 250g (without batteries)

The Air-Aide AA-3500 Airborne Particulate Monitor provides accurate and instantaneous display of concentration readings on lung damaging particulates and aerosols. AA-3500 is a portable handheld survey tool for measuring lung damaging particulate matter. The unique sensor design has applications in indoor air quality (IAQ), HVAC, environmental and industrial hygiene. Results are immediately displayed and stored in memory. The supplied PC software allows for graphical and statistical representation of the total dust generating process, eliminating the need for repetitive and costly filter gravimetric laboratory analysis.

Features:• Direct reading with high resolutions and stability of airborne

particulates• Active sample flow using a long-life air sampling pump for

particle size separation• Location codes, user-defined audible alarm• Size selective inlet, PM-10, PM-2.5, PM-1.0 and ISO

respirable (4.0µm)• Rechargeable battery – unit runs on AC or DC power• Large data storage capacity – can run continuously for 15

months without downloading• On-screen programming of sampling and data storage

parameters• Downloading of stored data through an RS232 port; PC-

based software supplied to download and graph stored data• Selection of different built-in calibration factors for fine and

coarse particulate matter• CE, ETL approved• Optional Wireless Data Transmission to computer• Interfaces to wireless Video Dust Monitoring System Model

VDM-7500

Options:• Zero Filter• Calibration Span Reference insert• Size selective impactor: PM-10, PM-2.5, PM-1.0 and ISO

Respirable (4.0µm)

NEW


EVM Environmental MonitorsThe 3M™ EVM Series monitors both particulates and air quality in one compact instrument. From healthcare and manufacturing to construction and military applications, the EVM Series provides a lower cost of ownership by combining three instruments into one. Its user-friendly interface, patented dial-in rotary impactor, and advanced reporting and analysis features make it a particulate and IAQ area monitoring instrument of choice for industrial hygienists and safety professionals worldwide.

EVM-7 Features:• Intuitive, User-Friendly Controls

Its large display and buttons, simple screens, straightforward commands and robust software solutions put all of the EVM-7’s capabilities right at your fingertips.

• Simultaneous Measurement of Particulate and Gas Concentrations Reduces the need for multiple instruments and lowers the cost of ownership.

• Dial-in Rotary Impactor Twist and click selection of particulate settings: PM2.5, PM4, PM10 or TSP.* Eliminates disassembly and reduces the need for external cyclones.

• 90° Light Scattering Photometer Provides real-time measurement of particulates.

• Built-in Sampling Pump for Gravimetric Analysis Allows user to insert a 25 or 37 mm cassette to capture particulates for laboratory testing. Incorporates the effects of protective clothing and personal physical condition.

Specifications:PART NO. DESCRIPTIONEVM-7 EVM-7 Advanced Particulate and Air Quality Monitor

Includes base model with PID Sensor, CO2 Sensor, one Dummy Sensor (used to seal socket when no sensor is present), two 37mm Gravimetric Filter Cassettes (for pump protection; one in unit and one spare), 53-263 12V DC Universal Input Power Supply, 53-575 USB Cable, 100-456 Silicone Dielectric Grease for Impactors, 74-080 PID Cleaning Kit, 74-090 10 pack Pump Protection Filters, 74-720 Dust Zero Calibration Filter Assembly, 74-726 Toxic Calibration Adapter and 74-718 Storage Case. Also available with CO sensor. 3M ID 70-0715-8013-1

EVM-4 EVM-4 Indoor Air Quality Monitor

Includes base model with CO2 Sensor, two Dummy Sensors (used to seal socket when no sensor is present), 53-263 12V DC Universal Input Power Supply, 53-575 USB Cable, 74-726 Toxic Calibration Adapter and 74-718 Storage Case. Also available with CO sensor. 3M ID 70-0715-8015-6

EVM-3 EVM-3 Real-Time Direct Reading Particulate Monitor

Includes base model with two 37mm Gravimetric Filter Cassettes (for pump protection; one in unit and one spare), three Dummy Sensors (used to seal socket when no sensor is present), 53-263 12V DC Universal Input Power Supply, 53-575 USB Cable, 100-456 Silicone Dielectric Grease for Impactors, 74-090 10 pack Pump Protection Filters, 74-720 Dust Zero Calibration Filter Assembly, and 74-718 Storage Case 3M ID 70-0715-8016-4

AIRPROBE-10-120

Airprobe-10 Air Velocity Probe Airprobe-10 Kit -Includes Airprobe-10, 74-719 Mounting Bracket, 74-083 Adapter Cable, 53-037 120V AC Charger and 54-964 Carrying Case 3M ID 70-0715-8017-2

AIRPROBE -10-220

Airprobe-10 Kit -Includes Airprobe-10, 74-719 Mounting Bracket, 74-083 Adapter Cable, 53-038 220V AC Charger and 54-964 Carrying Case 3M ID 70-0715-8018-0

3M™ EVM-3 Specializes in real-time direct reading of particulate concentrations. This tri-sensor instrument utilizes the built-in sampling pump and dial-in impactors for real-time mass concentration readings.

EVM-3 measures:• Particulates (mass concentration) • Temperature• Relative Humidity

3M™ EVM-4Multi-sensor instrument designed for indoor air quality investigations. Simultaneously track, log and monitor multiple indoor air quality parameters including room air exchange rates and dew point.

EVM-4 measures:• Toxic Gas (choose from nine sensors)• Relative Humidity• Carbon Dioxide• Temperature

RENTALConcept Controls Inc.


AIR QUALITY


HAZ-SCANNER Indoor Environmental Monitoring StationThe portable HAZ-SCANNER Indoor Environmental Monitoring Station (IEMS) is designed to measure critical parameters for indoor environmental assessments, LEED green building certification, school zone measurements, job task analysis, and occupational health and safety compliance. The HAZ-SCANNER IEMS displays real-time readings with datalogging capabilities. Configure the IEMS for up to 14 simultaneous critical indoor measurements. Optional wireless data acquisition for continuous unattended sampling for up to one mile is available. Easily download data to a PC or Mac and create compliance-ready graphical reports with the supplied software.

Features:• Direct reading• Measures and displays data for up to 14 critical

air quality parameters• Standard IEMS configuration measures 5 parameters

including PM10 or TSP particulates, CO2, CO, temperature, and relative humidity

• Add one or all optional plug and play sensors and/or IEMS-specific meters (up to 9 sensors/meters total) Choose from additional toxic gas sensors, PID for VOCs, or IEMS-specific meters for light intensity, sound/noise, atomic/nuclear radiation, ELF radiation, and air velocity

• Available analog input port for alternative meter• Interchangeable size-selective impactors are available

for PM1.0, PM2.5, or PM4.0 (close approximation of respirable)

• In-line standard 37-mm or optional 25-mm gravimetric filter cassette provides concurrent filter sampling for chemical and biological analyses

• 1 to 4 L/min internal sample pump• 8-hour operation with NiMH battery, continuous

operation with AC power• Displays TWA, STEL, Max, and Min• Optional alarm indicator light and siren for

user-defined threshold limits• Removable handheld sensors for spot-checking remote

areas• Datalogging and optional real-time wireless

data transmission• Easy-to-use graph and reporting software — compatible

with PC and Mac

Description Cat. No.HAZ-SCANNER IEMS includes monitor with particulate sensor for TSP, impactor for PM10 sampling, CO2, CO, temperature, and relative humidity sensors, charger, HazComm Pro Software, cables, CD-ROM with instructions, and carry case

770-800

Requires calibration using appropriate calibration gas(es) and regulator sold separately

HAZ-SCANNER IEMS is expandable to up to 14 parameters; see sensors and meters listed below.

IEMS-specific Optional Meters (Choose up to 5)Each includes holder to mount meter on tripod accessory

Air Velocity Meter, 0 to 30 m/s or 0 to 5910 ft/min 770-801

Atomic/Nuclear Radiation Meter, 1 to 19,999 cpm or 0.001 to 100 mR/hr

770-802

ELF Radiation Meter, 1 to 200 mG 770-803

Indoor Light Intensity Meter, 0 to 50,000 lux/0 to 5000 footcandles

770-804

IEMS-specific Optional Sensors (Choose up to 4)†Nitrogen Dioxide Sensor, 0 to 20 ppm* 770-805

Sulfur Dioxide Sensor, 0 to 50 ppm* 770-806

Oxygen Sensor, 0 to 30%* 770-807

Ozone Sensor, 0 to 0.15 ppm* 770-808

Ozone Sensor, 0 to 5 ppm* 770-818

PID for VOCs, 0 to 2000 ppm (isobutylene equivalent) 770-809

AccessoriesSize-selective Impactors PM1.0 770-811

PM2.5 770-812

PM4.0 770-813

Calibration Standard, particulate 770-207

Calibration Regulator, 1.0 L/min fixed flow, male thread, for use with 34/58 L aluminum cylinder, required for use with calibrator gas for toxic gases

770-816

Tripod Stand for HAZ-SCANNER IEMS includes holder for IEMS

770-814

Alarm for HAZ-SCANNER IEMS 770-815

Wireless Radio Modem, 900 MHz, up to 300 feet 770-505

Wireless Radio Modem, 900 MHz, up to 1500 feet 770-505X† Hydrocarbon sensors and specialty sensors for nitric oxide, chlorine, hydrogen

cyanide, and hydrogen sulfide are available. Contact SKC; specify gas type when ordering.

* Additional calibration gas for the specific chemical is required when using additional toxic gas sensors.

Ordering Information



HAZ-SCANNER Wireless Environmental Perimeter Air StationThe portable HAZ-SCANNER Wireless Environmental Perimeter Air Station (EPAS) is easily deployed as an ambient air quality monitor to scan, measure, and document critical EPA criteria pollutants including nitrogen dioxide, carbon monoxide, sulfur dioxide, ozone, carbon dioxide, particulates, VOCs, and more. The EPAS provides direct readings in real time with datalogging capabilities. The graph and reporting software are compatible with PC and Mac.

Features:• Direct Reading• Build your own station with up to 14 simultaneous air measurements including U.S. EPA criteria

air pollutants • Standard configuration measures 5 parameters including PM10 or TSP particulates, NO2, CO,

temperature, and relative humidity • Add one or all optional plug and play sensors and/or EPAS-specific meters (up to 9). Choose

from additional sensors for toxic gas (including hydrocarbons, VOCs, and methane) and biological/chemical agents, and EPAS-specific meters for solar radiance/UV or IR, barometric pressure, sound/noise, atomic radiation, ELF radiation, rain, and wind speed/direction

• Available analog input port for alternative meter • Interchangeable size-selective impactors are available for PM1.0, PM2.5, or PM4.0 (close

approximation of respirable) • Real-time readings, datalogging capabilities

• Optional wireless data transmission up to 5 miles • Optional ethernet internet connection for 24/7 data reporting

• Easily portable and deployable• Battery operated• Network up to 8 EPAS to one central PC or Mac• Easy-to-use graph and reporting software compatible with PC and Mac

Ordering InformationContact a Concept Controls product specialist to build your custom HAZ-SCANNER Wireless EPAS.

PARAMETER SENSOR MEASUREMENT/CONCENTRATION RANGEParticulates 90° infrared light scattering 0 to 20,000 µg or 0 to 200 mg/m3

VOCs PID (10.6 eV) 0 to 100 ppmToxic Gas: NH3 - Ammonia Gas-sensing semiconductor (GSS) technology 0 to 100 ppmToxic Gas: CO2 - Carbon Dioxide NDIR 0 to 5000 ppmToxic Gas: CO - Carbon Monoxide Electrochemical 0 to 100 ppmToxic Gas: Cl2 - Chlorine Electrochemical 0 to 100 ppmToxic Gas: Hydrocarbon, CH4 - Methane Specific NDIR 0 to 1% vol., 0 to 10,000 ppm, 0 to 20% LELToxic Gas: Non-Methane Hydrocarbons (HC) NDIR Calibrated for 0 to 20% LEL or selected gasToxic Gas: HCN - Hydrogen Cyanide Electrochemical 0 to 100 ppmToxic Gas: H2S - Hydrogen Sulfide Electrochemical 0 to 100 ppmToxic Gas: NO - Nitrogen Oxide Electrochemical 0 to 100 ppmToxic Gas: NO2 - Nitrogen Dioxide Electrochemical 0 to 5000 ppb (0 to 5 ppm)Toxic Gas: O2 - Oxygen Electrochemical 0 to 30% vol.Toxic Gas: O3 - Ozone Gas-sensing semiconductor (GSS) technology 0 to 150 ppb (0 to 0.15 ppm), 0 to 500 ppb (o to 0.5 ppm)Toxic Gas: SO2 - Sulfur Dioxide Electrochemical 0 to 5000 ppb (0 to 5 ppm)Rainfall/Precipitation Rain gauge (heated, tipping bucket) 0 to 5 inches dailyTemperature NTC thermister -4° to 140° F (-20° to 60° C)Relative Humidity (RH) Thin-film capacitive 0 to 100% RHSolar Radiance Intensity Photoiodode 1110 watts/square meter (W/m))Sound and Noise Type 2 SLM 30 to 135 decibels (dB)Atomic Radiation Geiger counter 1 to 19,999 counts per min (cpm) or 0.001 to 100 milliRad/hrELF Radiation Sensor with single-axis probe 1 to 200 milligauss (mG)Wind Speed/Direction 3-cut anemometer/continuous rotation potentiometric

wind direction vane0 to 125 mph/5 to 355°

Barometric Pressure Piezo Resistive 28 to 31 in HgDew Point Temperature Software calculation from RH and Temperature -47.2° to 122° F (-44° to 50° C)Wet Bulb Temperature Capsulated thermistor with wick 3.2° to 122° F (-16° to 50° C)

AIR QUALITY


Ambient Air Quality Monitor AQM60The AQM 60 monitors fill the gap between full reference monitoring stations and simple diffusion samplers. Typical applications include traffic or roadside monitoring, urban air quality measurement and fenceline monitoring of air pollution sources. The AQM60 utilizes proprietary Analytic GSS Technology to provide high performance within a flexible cost effective package.

The AQM 60 monitors are discreet, highly compact, and deliver precise measurement data for a wide range of ambient pollutants including O3, NO2, CO, SO2, CO2, VOC, plus PM10 and environmental parameters such as temperature, humidity, wind speed and direction, noise and other meteorological sensors. Data is stored internally and is also available in real-time via GSM modem, low power radio, ethernet and other communication options.

Features:• Analytic GSS technology• Multiple gas sensors (up to six)• Temperature and humidity sensors• Particulate monitor (PM2.5 or PM10)• Large internal data storage capacity• Zero and span calibration facility• Remote diagnostics capabilities• Weatherproof and compact enclosures• Thermal management system• Wind speed and direction anemometer• Noise and meteorological sensors• Wireless communication

NEW

Environment Operation Range

10 to 25 C (standard)-20 to 45 C (with heater or cooler)10 to 90 %RH (non condensing)

Communications GSM modem / RF modem / ethernet LAN

Other Sensor Options

Noise sensors / Particle counters / Meterological sensors

Power Supply 12 VDC (power subject to configuration) / AC power module 100 to 250 VAC

Enclosure Standard: Fibre reinforced polycarbonateOptions: Insulated roadside boxes / Metal enclosures / Mounting accessories

Dimensions H 23.6 x W 19.7 x D 9.1in. (600 x 500 x 230 mm)

Weight 33 to 55 lb (15 to 25 kg)

Gas Sensor Modules:

Gas Sensor Modules Sensor Range (ppm) Accuracy Resolution (ppm) Power Ozone GSS 0 - 0.150 <+/- 0.005 ppm 0.001 2.9 W

Nitrogen dioxide GSS 0 - 0.200 <+/- 15 % 0.001 12.3 W

Carbon monoxide GSS 0 - 100 <+/- 5 ppm 0.1 2.5 W

Sulphur dioxide GSS 0 - 10 <+/- 0.5 ppm 0.01 2.5 W

Non-methane hydrocarbon

GSS 0 - 25 <+/- 0.5 ppm 0.1 2.5 W

VOC isobutylene GSS 0 - 25 <+/- 10 % 0.1 2.5 W

VOC isobutylene PID 0 - 20 <10 % 0.01 1.5 W

Hydrogen sulphide GSS 0 - 10 <+/- 0.5 ppm 0.01 2.5 W

Carbon dioxide NDIR 0 - 2000 <40 ppm + 3% 1 1.0 W

Temperature/Humidity Sensor:

Sensor Range Accuracy Resolution PowerTemperature -20 - 100C +/- 0.3C @ 25C 0.1C 2.9 W

Humidity 0 - 100%RH +/- 2%RH @ 25C 0.1%RH 2.9 W

Particle Monitor Forward light scatter nephelometer

Range Particle Size Precision Accuracy LT Stability Cut Points Power1 - 2000μg/m 0.1 - 100μm 3μg/m 8% NIOSH 0600 5% of reading TSP, PM1, PM2.5, PM10 5.2 W

Anemometer Module Sonic or mechanical combination

Wind Speed Wind Direction Accuracy Resolution Power0 - 160km/h 0 - 360degree +/- 3% WS, +/- 3degree WD 0.1m/s, 1degree 1.0 W

WIRELESS


Handheld Laser Particle Counter 3887Features:

• Displays 3 particle sizes simultaneously (0.3, 0.5, 5.0 um) in cf or m3

• Built-in flow sensor (0.1 CFM +/- 10%)• User can log up to 8,000

measurements with easy transmission to PC or Printer

• Fits in your palm• Batteries can be altered with regular

AA alkaline batteries• Comes with a network capable of up to 8 units using

optional Windows software as a standard accessory

Specifications:

Measuring Particle Size 0.3, 0.5, 5.0um

Light Source Laser Diode

Counting Efficiency 50% @ 0.3 um; 100% for particles > 0.45 um (per JIS B9921: 1997)

Zero Count .1 count / 5 minutes (per JIS B9921: 1997)

Coincidence Loss <5% @ 2,000,000 particles/cf

Flow Rate 0.1 cfm (2.83l/min)

Sampling Time 1 sec to 99 minutes 59 sec (1 sec increments)

Sampling Frequency 1 to 99 times or Continuous

Count Alarm 1 - 70,000,000 counts

Mode of Measurements Single / Repeat / Continuous / Calculation / Remote / ISO <C4

Display 20 letters, 4 lines

Error Max. concentration, Laser Power, Flow Rate and Battery

Interface RS232C or RS485

Baud Rate 9600bps

Buffer Memory 8000 measurements

Power Supply 4 x AA NiMH battery or Alkaline, AC Adapter (100 - 240V)

Operating Hours Approximately 3 hours (NiMH)

Dimensions 4.3” x 7.7” x 2.7” (108 x 196 x 68 mm)

Weight 1.5 lbs (680g)

Operating Conditions 50 - 95°F (10 -35°C)

Accessories AC Adapter, Zero Filter, Software, Communication Cable, 4xAA NiMH, Battery Charger

Options Printer, Printer Cable, Carrying Case, Tripod

Handheld Laser Particle Counter 3886 GEO-αFeatures:

• Measures 5 particle sizes simultaneously (0.3, 0.5, 1.0, 3.0 and 5.0 um) in cf or m3, displaying 2 channels

• Built-in flow sensor (0.1 CFM +/- 10%)

• Temp/RH and Air Velocity probes available as an option

• Capable of measuring up to 4 parameters in one instrument

Specifications:

5 Size Channels 0.3 um; 0.5 um; 1.0 um; 3.0 um; 5.0um

Flow Rate 0.1 cfm (2.83 l/min)


Calibration PSL particles in air

Counting Efficiency 50% @ 0.3 um; 100% for particles > 0.45 um (per JIS B9921: 1997)

Zero Count .1 count / 5 minutes (per JIS B9921: 1997)

Coincidental Loss <5% @ 2,000,000 particles/cf

Sampling Time 1 sec - 99 min 59 sec, 1 second increment

Sampling Frequency 1 - 99 or continuous

Count Modes Single, Repeat, Continuous, Calculation and Remote

Display 20 letters, 4 line LCD

Interface RS232C or RS485

Baud Rate 9600 bps

Buffer Memory 500 sample records

Power AC Adapter 5VDC at 2.5A, 100 - 240VAC, 50 to 60 Hz

Rechargeable Battery

4 x AA NiMH

3.5 hrs with 1600mAh batteries

Vacuum Source Internal pump, flow controlled

Dimensions 4.5 x 2.8" x 8.5" (115 mm x 70 mm x 211 mm) "

Weight 2.2 lbs (1 kg)

Accessories AC Adapter, Zero Filter

Options Isokinetic Probe, Air Velocity Probe, Thermal Printer, Temperature/Relative Humidity Probe, Carrying Case

PartiCle & dust monitors

PARTICLE & DUST MONITORS

RENTAL

AIR QUALITY


Features:• 0.015 μm sensitivity• Concentration range of 0 to

100,000 particles/cm3• Programmable datalogging

capabilities• Power supply can be selected

from alkaline/Ni-MH battery or AC adapter

• Simple to download the data to your computer via USB

Specifications:

Measuring Particle Size 0.015 to > 1μm

Concentration Range 0 to 100,000 particles/cm³

Counting Efficiency 50nm: 100±20% (15nm: More than 50%)

Zero Count Less than 1 particle/ cm³

Flow Rate Aerosol Flow: 100cc/min

Total Flow: 700cc/min

Alcohol Supply

Type 100% reagent-grade isopropyl alcohol

Hours per Fill Approx. 5 hours at 23°C (73°F)

Absolute Pressure Sensor 150 to 1150 hPa

Mode of Measurements Repeat / Program / Counter

Display Built-in LCD ( 128 x 64 dots)

Interface USB

Buffer Memory Max. 10,000 measurements

Power Supply

Type 6 pieces of AA-size Alkaline / Ni-MH battery or AC adapter (Input 100 . 240V)

Operating hours

Approx. 5 hours (by Alkaline batteries); Approx. 8 hours (by Ni-MH batteries)

Environmental Operating Condition

Ambient temperature range: 10 to 35°C (50 to 95°F)

Dimensions 4.7"W x 11"H x 5.1"D (120 x 280 x 130mm)

Weight Approx. 3.3lbs (1.5kg) (without batteries)

Standard Accessories AC adapter, Zero filter , Alkaline battery x 6, Operation manual, Software (for Windows), PC Communication Cable, Carrying Case

Options Ni-MH battery (1.2V-2500mA) x 6, Charger x 2, Printer, Printer cable, Printer AC adapter

Handheld Condensation Particle Counter 3800Features:

• 50 L/min (1.77 cfm) Flow Rate - Model 3910• Compliant with ISO 21501-4 and

21 CFR Part 11• Simultaneous measurements of

6 particle sizes• Store up to 10,000

measurements• Stainless enclosure• 2 year warranty• Featherlight with an ultra-small

footprint• Large Colour touchscreen• Multi-parameter: Particle, Airflow, Temperature, Humidity,

Differential Pressure• Mulit-standard mode: ISO 14644, FS 209E, BS 5295, EC

GMP

Specifications:

Channel Sizes 0.3 um, 0.5 um, 1.0 um, 3.0 um, 5.0um, 10.0um

Flow Rate 50 LPM (Model 3910) / 28.3 LPM (Model 3905)


Counting Efficiency 50% @ 0.3 um

Zero Count Less than 1 count / 5 minutes

Interface Ethernet, USB, Memory card slot (MMC)

Data Storage 10,000 measurement data

Environmental Sensor

Air Velocity, Temperature, Relative Humidity and Pressure

Power AC Adapter AC 100 - 240 V

Battery Li-ion Battery

Dimensions W 7.9 x D 7.9 x H 8.1 inch

Weight 14.2 lbs (6.44 kg)

Accessories Quick-start guide, AC adapter, zero filter, Isokinetic probe with 79 inch (2m) tubing, inlet nozzle, data processing software, memory card, 2 rolls of cleanroom-grade printer paper, 1 x Li-ion battery and calibration certificate

Options Carrying Case, Spare Battery, Battery Charger, Air Velocity, Temperature, Relative Humidity Probe , Differential Pressure Sensor

Optional Probe:Model 6531-2G-P

Probe Type Uni-Directional

Air Velocity 20 to 6000 fpm (0.10 to 30 m/s)

Temperature -4 to 158°F (-20 to 70°C)

Relative Humidity 2.0 to 98.0 %RH

Portable Particle Counter 3910 NEW


HAZ-DUST IV Particulate MonitorThe HAZ-DUST IV, with new infrared detector, displays immediate breathing zone measurements and comprehensive graph reporting of aerosol and dust for industrial hygiene and environmental air investigations. Operate without a sampling head for total head measurement (NIOSH 0500) or target specific particle fractions by installing an inhalable, thoracic, or respirable sampling head. An in-line 37-mm cassette behind the sensor may be used to collect a concurrent filter sample for gravimetric or chemical analysis.

Features:• Immediate display of

particle concentration in mg/m3

• Interchangeable sampling heads

• Operate without a sampling head for total head measurement (NIOSH 0500)

• Internal adjustable sample pump — 1.0 to 3.3 L/min• In-line cassette directly behind sensor for concurrent filter

sampling• Audible alarm with adjustable threshold• Worker comfort• DustComm Pro Software for downloading, basic trend

analysis, and comprehensive graphical reporting• Run time over 8 hours with rechargeable NiMH battery

Ordering InformationDescription Cat. No.HAZ-DUST IV Monitor includes monitor, thoracic head, in-line filter cassette, carry case, computer cable, battery charger, HAZ-DUST Media CD with instruction manual, and DustComm Pro Software 110 - 240 V 770-4004HAZ-DUST IV Monitor Kit includes all items listed above plus GS Cyclone and adapter, IOM and adapter, calibra-tion jar, and standard 110 - 240 V 770-4004KSampling HeadsInhalable Sampling Head and Adapter, IOM Sampler, mounts on HAZ-DUST IV sensor

770-115A

Thoracic Sampling Head, mounts on inlet or HAZ-DUST IV sensor

770-4107

Respirable Sampling Head, GS-3 Cyclone, mounts on HAZ-DUST IV sensor

225-103

Adapter for Respirable Sampling Head, required when using GS-3 Cyclone

770-313

AccessoriesCalibration Standard for Monitor, for verifying span and optical sensor performance

770-140

Calibration Jar, for calibrating and setting pump flow when using respirable sampling head

225-112

Zeroing Accessory, for clean-air zeroing of sensor when using inhalable sampling head

770-4202A

Zeroing Filter, for use with respirable and thoracic sam-pling heads

770-4102

Requires calibration with equipment sold separately, see accessories

HAZ-DUST Real-Time Particulate Monitor

At the touch of a button, the HAZ-DUST real-time particulate monitor provides accurate and instantaneous data on airborne particle concentration in accordance with NIOSH Method 0600. Designed for industrial hygiene, indoor air quality, and hazardous materials investigations, HAZ-DUST saves money by eliminating repetitious and costly gravimetric air sampling and analysis.

Features:• Easy operation and instantaneous readings in mg/m3 • Selectable dual measuring range feature

• Particulate concentrations between 0.01 and 20 mg/m3 and from 0.1 to 200 mg/m3

• Easy-to-read digital display • Highly sensitive - measurements down to 0.01 mg/m3 • Rechargeable 8 hr battery life & low battery indicator• Unique design provides protection from RFI/EMI • Lightweight, rugged, and portable • Optional tripod mounting • Optional datalogger w/ user-selectable alarm threshold • Easy-to-use DustComm Pro Software available with

datalogger for downloading, time vs concentration profiling, and comprehensive graphical reporting

• CE Marked

Specifications:

Sensing range: 0.01 to 200 mg/m3Display: LCD 3.5 digits mg/m3 concentration

readingCalibration: SAE fine test dust compared with NIOSH

0600Particle size range: 0.1 to 50 µmPrecision: ± 0.02 mg/m3Accuracy: ± 10% to NIOSH 0600Power: NiMH rechargeable batteryOperating time: > 8 hrsCharging time: 10 to 12 hrsHumidity: 95% non-condensingDimensions: 9 x 2.75 x 1.5 in

(22.9 x 7.0 x 3.8 cm)Weight: 1.10 lbs (0.5 kg)Optional datalogger: Two-key programmable operation. Real-

time clock, display, and user-selectable alarm threshold. Includes software for statistics, graphs, and reports. PC-compatible.

Recording time: 1 sec to 15 moSampling rate: 1 sec, 10 sec, 1 min, 10 min, and 30 min

averagingSignal input: 0 to 2 voltOutput: RS-232C (9600 baud rate)


AIR QUALITY


EPAM 5000The portable HAZ-DUST EPAM-5000 particulate monitor is ideal for ambient, environmental, and indoor air quality investigations. The highly sensitive EPAM-5000 uses light scattering to measure particle concentration and provide real-time determinations and data recordings of airborne particle concentration in mg/m3. Interchangeable size-selective impactors allow PM10, PM2.5, PM1.0, or TSP monitoring. The unique aerodynamic particle sizing and optional 47-mm in-line filter holder loaded with appropriate filter can provide concurrent gravimetric sampling. Download and store sampling data on a PC for analysis and reporting using included DustComm Pro Software.

Features:• Immediate display and data storage of lung damaging

aerosols• Provides both real-time and filter gravimetric data• Unique aerodynamic particle sizing real-time sensor

and in-line 47mm filter cassette which allows concurrent gravimetric samplings

• High correlation to EPMA PM-10 methods and TEOM• Added value survey sampler for saturation monitoring

studies• Easy to use Data Analysis Software• Easy to clean optical sensor with self-purging capabilities• LPKM flow compensated sampling pump• True 24-hour battery capacity or continuous A/C power

operation• Audible Alarm Siren• Optional accessories such as: Solar Power Panel, strobe

light, and inlet heater

EPAM 7500The HAZ-DUST EPAM-7500 portable monitor and air station gives real-time measurements of particulate matter, temperature, and relative humidity in ambient and indoor air. Interchangeable size-selective sampling heads allow PM10, PM2.5, PM1.0, respirable, or TSP monitoring. Optional accessories for measuring wind speed and direction are available. A filter holder positioned directly behind the optical sensor provides concurrent gravimetric sampling for cross calibration of optical sensor, further particulate speciation, and determination of metal and carbon content.

Features:• Immediate display and data storage of lung damaging

aerosols• Provides both real-time and filter gravimetric data.• Unique aerodynamic particle sizing real-time sensor

and in line 47mm filter cassette which allows concurrent gravimetric samplings

• High correlation to EPMA PM-10 methods and TEOM*.• Added value survey sampler for saturation monitoring

studies• Easy to use Data Analysis Software• Easy to clean optical sensor with self-purging capabilities.• LPM flow compensated sampling pump• True 24-hour battery capacity or continuous A/C power

operation• Audible alarm siren• Graphical colour display• USB, ethernet, removable data card and serial DB9

connections• Wind and 1 other optional sensor• Optional accessories such as: Solar Power Panel, strobe

light, and inlet heater

Features:• Particle size range: 0.1 to 10µm• Measuring range: 0.001 to 10 mg/m3• Data logging up to 100,000 measurements• USB interface for data transfer• Compact and light weight unit• More than 24 hours run time with Li-ion battery• Capable of analog and digital output• Useful tripod mount• Rubber protector and Shoulder strap included

Digital Dust Monitor 3443 Measuring Method Light Scattering MethodLight Source Laser diodeMeasuring Object Airborne Particle Matter < 10 µmMeasuring Range 0.001 to 10.0 mg/m3Accuracy +/- 10% of readingData Logging 100,000 data and time

stamped measurementsOutput Digital USB

Analog O to 1 V, Pulse, AlarmPower Supply 6 AA batteries or AC adapterDimensions W 6.4” x H 4.3” x D 2.4” (162 x

109 x 60mm)Weight 2.9 lbs. (1.3 kg)



HAZ-DUST VDM-7500Digitally record workplace dust exposure with the HAZ-DUST VDM-7500 wireless video dust monitoring system. The VDM-7500 measures levels of lung damaging particles while simultaneously overlaying dust concentration information onto video images. Easily clip the lightweight monitor to a worker’s belt and the sensor in the breathing zone. Through wireless communication, all data is displayed in real time on the PC. Record and obtain specific events that are clearly linked to worker exposure to airborne contaminants. View, record, and store streaming video, data points, and graphical profiles of dust concentrations on a PC with powerful DustComm Pro Software. Only the VDM-7500 provides you with the integration of video and particulate dust monitoring technology for a more dynamic assessment of air contamination and worker exposure — the components necessary for documentation and control.

Features:• All-in-one system• Digital and wireless for unattended monitoring• Simultaneous real-time workplace video display,

dust readings, and gravimetric collection for any type of aerosol

• Record-to-disk feature• True breathing zone measurements of inhalable, thoracic,

or respirable particulate• Compact and rapidly deployed

Ordering InformationDescription Cat. No.VDM-7500 Wireless Video Dust Monitoring System includes wireless particulate monitor†, wireless video camera, customized portable PC with radio receiver, and all software and hardware setup packaged in a rolling carry case with handle 110 - 240 V 770-7500Accessories*Adapter for GS-3 Respirable Cyclone, required when using GS-3 Cyclone

770-313

Inhalable Sampling Head and Adapter, IOM Sampler, mounts on monitor sensor

770-115A

Calibration Standard for monitor, for verifying span and optical sensor performance

770-140

Replacement Battery Pack, NiMH 770-4105 Requires calibration with equipment sold separately, see accessories * Cleaning Kit accessory available; contact SKC† Use the VDM-7500 only with the HAZ-DUST Monitor included with the system.

Piezobalace Dust Monitor 3521 / 3522Features:

• Data logging ability allows user to log 500 samples

• Simple cleaning mechanism for easy maintenance

• RS232C port available as standard

• Back-lit display• Data can be reviewed on-screen, printed or downloaded to

a computer• Software included for easy data download and processing• Easy operation requires no special training

PrincipleAs an air sample enters the system, it travels through the impactor, which captures and removes larger particulates from the sample. Smaller particulates become electrically charged and deposited on the piezo-crystal. The total mass of the deposited particulates affects the piezo-crystal’s frequency. Since the change in frequency is proportional to the mass of the particulates, the actual weight of the particulates is obtained.

Specifications:

Model 3521 3522Measuring Object Airborne Particle

Matter < 10 µmAirborne Particle Matter < 2.5 µm

Impactor 10 µm, 4 µm 2.5 µm

Measuring Range 0.01 to 10 mg/m3

Sampling Flow Rate

1L/min

Accuracy +/- 10% of reading +/- 1 digit (0 to 5 mg/m3)+/- 20% of reading +/- 1 digit (5 to 10 mg/m3)

Data Logging 500 data and time stamped measurements

Digital Output RS-232C

Power Supply AC or Ni-MH battery

Dimensions H7.0” x D5.9” x W2.7” (180 x 150 x 65mm)

Weight (incl. batteries)

4.4 lbs. (2 kg)

AIR QUALITY


Dust Sentry NEW

PAMS is an electrical mobility size spectrometer designed for portable, mobile, or handheld aerosol sampling applications. It provides the number-weighted diameter distribution of aerosols over the entire submicrometre range (10 to 863nm) in one scan. The unit uses a nonradioactive bipolar aerosol charger to allow easy access to sampling sites with tight safety regulations. Its bipolar charger significantly reduces measurement uncertainty of larger particles in the submicrometre range.

Features:• Electrical mobility size spectrometer designed for portable,

mobile, or handheld aerosol sampling applications• Provides number-weighted diameter distribution of

aerosols over the entire submicrometre range (10 to 863nm) in one scan

• Uses a non-radioactive bipolar aerosol charger to allow easy access to sampling sites with tight safety regulations

• Bipolar charger significantly reduces measurement uncertainty of larger particles in the submicrometre range

• Can be used in two modes: Single diameter count mode: to get a total count within a narrow size range, or Size distribution mode: to get an automated size distribution measurement over desired size range or size resolution

• Stand-alone, battery-operated instrument; no external computer needed

• Weighs only 4.5 kg and measures 23 x 23 x 15 cm

Specifications:

Measuring Modes Single size mode (single size concentration)Scan mode (size distributions)

Size Range 0.2LPM: 14.5 to 863 nm0.4LPM: 10 to 433 nm

Scan Resolution 0.2LPM: 14 channels0.4LPM: 27 channels

Scan Time 0.2LPM: 42 sec to minutes for one scan0.4LPM: 81 sec to minutes for one scan

Concentration Range 0 to 100,000 particles /cm3

Flow Rate Inlet: 0.7 LPMSample: 0.05 LPM

Bipolar Charger Dual corona charger at 5 μA

Condensing Fluid Isopropyl alcohol

Display Colour touchscreen

Dimensions (WHD) 9.1 x 9.1 x 5.9 inch (23 cm x 23 cm x 15 cm)

Weight 9.9 lbs (4.5 kg )

Portable Aerosol Mobility Spectrometer (PAMS)

NEW

The Dust Sentry provides real time, continuous particle measurement of TSP, PM10, PM2.5 or PM1 with datalogging and alarm relay outputs. Numerous integrated options including SMS and/or email notifications, weather sensors, noise and mounting equipment make the Dust Sentry a flexible base system suitable for a wide range of applications.

Features:• Real time particle monitoring,

measures and reports data in 1 minute intervals

• Accurately measures TSP, PM10, PM2.5 or PM1• On board data storage for up to 15 years of data• Web-based and GSM data retrieval and alerts• Gravimetric filter• Option to integrate weather, wind, temp/RH sensors, and

sirens• Tough weatherproof enclosure with solar shielding for hot

climates• Quick installation and relocatable

Specifications:

Model # DS 10 DS 25 DS 1Measurement technology

Near forward light scattering nephelometry

Range 0-2000µg/m3

Accuracy +/-(2 ug/m3 +5% of reading)

Cut point PM 10 PM 2.5 PM 1

Sample flowrate

2.0 LPM

Inlet Heated

Alarm Relay and SMS (optional)

Datalogging 2GB SD card (>15 years data storage)

Reference filter 25mm GF filter

Software Datalogging and configuration software included

Outputs RS232 & cellular IP Gateway

Mounting Pole and wall mounting

Wireless communication options

Low power RF modem

Meteorological sensor options

Temperature & RH sensor, Gill WindSonic, Vaisala WXT520

Environmental operating range

-10°C to +45°C; 10 to 95% RH (NC)

Power requirements

Mains (100 to 260VAC) or regulated 12VDC (10W)

Enclosure Lockable & weatherproof GRP cabinet IP65; 685 x 350 x 300mm (including solar shield armour &

mounting brackets)

Weight Less than 12kg

air quality instruments - concept · pdf fileair quality instruments handheld ... haz-scanner...

Documents