agilent 7500 series icp-ms customer maintenance parts list † agilent 7500 series icp-ms...

Download Agilent 7500 Series ICP-MS Customer Maintenance Parts List † Agilent 7500 Series ICP-MS Hardware Manual

If you can't read please download the document

Post on 19-Apr-2020

0 views

Category:

Documents

0 download

Embed Size (px)

TRANSCRIPT

  • Agilent 7500 Series ICP-MS Customer Maintenance Parts List

  • Notices

    Copyright © 2006 Agilent Technologies

    No part of this manual may be repro-

    duced in any form or by any means

    (including electronic storage and

    retrieval or translation into a foreign

    language) without prior agreement

    and written consent from Agilent

    Technologies, Inc. as governed by

    United States and international copy-

    right laws.

    Manual Part Number

    G3270-90123

    Edition

    Rev.B, December 2006

    Printed in Japan

    Agilent Technologies, Inc.

    9-1 Takakura-cho, Hachioji-shi,

    Tokyo 192-8510 Japan

    Warranty

    The material contained in this document is provided “as is,” and is subject to being changed, without notice, in future edi- tions. Further, to the maximum extent permitted by applicable law, Agilent disclaims all war- ranties, either express or implied, with regard to this manual and any information contained herein, including but not limited to the implied war- ranties of merchantability and fitness for a particular pur- pose. Agilent shall not be liable for errors or for incidental or consequential damages in con- nection with the furnishing, use, or performance of this docu- ment or of any information con- tained herein. Should Agilent and the user have a separate written agreement with war- ranty terms covering the mate- rial in this document that conflict with these terms, the warranty terms in the separate agreement shall control.

    Technology Licenses

    The hardware and/or software

    described in this document are fur-

    nished under a license and may be

    used or copied only in accordance

    with the terms of such license.

    Restricted Rights Legend

    If software is for use in the perfor-

    mance of a U.S. Government prime

    contract or subcontract, Software is

    delivered and licensed as “Commer-

    cial computer software” as defined in

    DFAR 252.227-7014 (June 1995), or

    as a “commercial item” as defined in

    FAR 2.101(a) or as “Restricted com-

    puter software” as defined in FAR

    52.227-19 (June 1987) or any equiva-

    lent agency regulation or contract

    clause. Use, duplication or disclosure

    of Software is subject to Agilent

    Technologies’ standard commercial

    license terms, and non-DOD Depart-

    ments and Agencies of the U.S. Gov-

    ernment will receive no greater than

    Restricted Rights as defined in FAR

    52.227-19(c)(1-2) (June 1987). U.S.

    Government users will receive no

    greater than Limited Rights as

    defined in FAR 52.227-14 (June

    1987) or DFAR 252.227-7015 (b)(2)

    (November 1995), as applicable in

    any technical data.

    Safety Notices

    CAUTION

    A CAUTION notice denotes a hazard. It calls attention to an operating procedure, practice, or the like that, if not correctly per- formed or adhered to, could result in damage to the product or loss of important data. Do not proceed beyond a CAUTION notice until the indicated conditions are fully understood and met.

    WARNING

    A WARNING notice denotes a hazard. It calls attention to an operating procedure, practice, or the like that, if not correctly performed or adhered to, could result in personal injury or death. Do not proceed beyond a WARNING notice until the indicated conditions are fully understood and met.

  • Agilent 7500 Series ICP-MS

    Customer Maintenance

    Parts List

  • Contents

    Preface

    About the Maintenance Parts P-2

    Conventions Used in This Book P-3

    Where to Go for More Information P-4

    Agilent Technologies on the Internet P-4

    1 Parts Related to the Peristaltic Pump

    Parts Related to the Peristaltic Pump 1-2

    2 Parts Related to the Nebulizer

    Parts for the Babington Nebulizer 2-2

    Parts for the Concentric Nebulizer 2-4

    Parts for the Micro Flow Nebulizers 2-6

    Parts for the MicroMist Nebulizer 2-8

    Burgener Research Mira Mist Nebulizer 2-9

    Parts Related to the PFA Concentric Nebulizer 2-10

    Parts for the Cross Flow Nebulizer 2-12

    Miscellaneous parts for Nebulizer 2-14

    3 Parts Related to the Spray Chamber

    Parts Related to the Spray Chamber 3-2

    C-1

  • Agilent 7500 Series ICP-MS Customer Maintenance Parts List

    Contents

    4 Parts Related to the Torch

    Parts Related to the Torch 4-2

    5 Parts Related to the Interface

    Parts Related to the Interface 5-2

    6 Parts Related to the Ion Lens and Vacuum Chamber

    Parts Related to the Ion Lens and Vacuum Chamber 6-2

    7 Parts Related to the 7500ce

    Parts Related to the 7500ce 7-2

    8 Parts Related to the 7500cs

    Parts Related to the 7500cs 8-2

    9 Miscellaneous Components

    Miscellaneous Components 9-2

    10 Parts related to the Integrated Sample Introduction System (ISIS)

    Parts Related to the Integrated Sample Introduction System (ISIS) 10-2

    Parts Related to the Hydride Generator Accessory 10-7

    C-2

  • Agilent 7500 Series ICP-MS Customer Maintenance Parts List

    Contents

    11 Parts Related to the GC-ICP-MS Interface

    Parts Related to the GC-ICP-MS Interface 11-2

    12 Parts Related to the Integrated Auto Sampler (I-AS)

    Parts Related to the I-AS (Integrated Auto Sampler) 12-2

    13 Parts Related to the ASX-500 Series ICP-MS Autosampler

    Parts Related to the Agilent ASX-500 Series ICP-MS Autosampler 13-2

    C-3

  • Agilent 7500 Series ICP-MS Customer Maintenance Parts List

    Contents

    C-4

  • Preface

  • Agilent 7500 Series ICP-MS Customer Maintenance Parts List

    Preface

    Preface

    The Agilent 7500 Series ICP-MS Customer Maintenance Parts List explains the

    maintenance parts for use with the Agilent 7500, the Integrated Sample Introduction

    System (ISIS), Integrated Auto Sampler ( I-AS), GC-ICP-MS Interface and the

    ASX-500 Series ICP-MS Autosampler.

    About the Maintenance Parts

    It is important to maintain the Agilent 7500 regularly to extend the useful life of its

    components and optimize its analytical capabilities, including the periodical

    replacement of parts.

    Please contact your local Agilent office when ordering parts, and please confirm the

    correct part number for replacement.

    P-2

  • Agilent 7500 Series ICP-MS Customer Maintenance Parts List

    Preface

    Conventions Used in This Book

    This book uses certain conventions to distinguish different types of information

    easily. This section describes these conventions.

    Notes

    Notes contain a reminder about the effect of particular actions. They are indicated as

    follows:

    NOTE This example shows how a note is displayed.

    Cautions

    Cautions indicate situations that could overwrite data or require immediate attention

    to prevent harm to the instrument. Cautions are indicated as follows:

    CA UTION

    This example shows how a caution is displayed.

    Warnings

    Warnings indicate situations that could cause bodily harm. Warnings are indicated as

    follows:

    WA RNING

    This example shows how a warning is displayed.

    P-3

  • Agilent 7500 Series ICP-MS Customer Maintenance Parts List

    Preface

    Where to Go for More Information

    In addition to the Agilent 7500 Series ICP-MS Customer Maintenance Parts List,

    you can reference the following resources:

    • Agilent 7500 Series ICP-MS ChemStation Operator's Manual

    • Agilent 7500 Series ICP-MS Hardware Manual

    • Agilent 7500 Series ICP-MS Tuning and Application Handbook

    • Agilent 7500 Series ICP-MS Option Instruction Manual

    • Online Help

    • Integrated Autosampler Manual

    • GC-ICP-MS Interface Manual

    Your computer system has additional manuals that document the software and

    hardware. For more information on using or maintaining your computer, printer, or

    peripheral equipment, consult the respective hardware user’s guide. Microsoft®

    Windows™ has a user’s guide that explains how to install, use, and troubleshoot the

    software.

    Agilent Technologies on the Internet

    You can get information about applications, peripherals and the core products at

    www.agilent.com/chem/icpms. The patch file to update the ChemStation to the

    latest revision can also be downloaded from the same URL.

    Notice of Trademarks

    Tygon® and PharMed® are registered trademarks of Norton Performance Plastics

    Corporation.

    Teflon® is a registered trademark of E. I. DuPont de Nemours and Company.

    Viton® is a registered trademark of DuPont Dow Elastomers, L.L.C.

    P-4

  • 1

    1 Parts Related to the Peristaltic Pump

  • Agilent 7500 Series ICP-MS Customer Maintenance Parts List

    Parts Related to the Peristaltic Pump

    Parts Related to the Peristaltic Pump

    Peristaltic Pump Tubing for Sample Introduction

    (Tygon Tubing, 1.02mm id, 12/pk)

    P/N : G1833-65569

    This tubing is the standard peristaltic pump tubing for sample introduction.

Recommended

View more >