agilent 1260 infinity analytical sfc system · the agilent 1260 infinity sfc system uses...
TRANSCRIPT
12
8
6
4
10
2
00
Cost per liter [US$]
Beverage-grade CO2Analytical-grade CO2
The Agilent 1260 Infinity SFC System uses beverage-grade CO2 – reducing total CO2 costs by a factor of 10.
Agilent 1260 AnalyticalSFC Solution
Infinitely better SFC performance at lower running costsThe Agilent 1260 Infinity Analytical SFC System sets higher standards in performance and reliability. And, because it uses beverage-grade CO2, you get a 10x decrease in running costs.
Special discounts on SFC/MS systems from Agilent!If you have an Agilent LC/MS system in your laboratory and wish to purchase a new Agilent SFC/MS system, we will give you a 30% discount on the SFC system and up to 35% discount on the new MS.
Higherperformance
Lowerrunning costs!
Superior technology in the Aurora SFC Fusion A5 module helps you to achieve the highest sensitivity ever obtained in supercritical fluid chromatography. This technology facilitates low level impurity analysis as well as enantiomeric excess determination. Find out more at:
www.agilent.com/chem/sfc-performance
Act TODAY – ask your local Agilent representative for a quotation!
-35%
-30%
Absorbance [mAU]0.8
0.2
-0.4-0.2
-0.6
0.60.4
-0.8-1
0
0 1 2 3 Time [min]
LOQ = 2.5 ng each0.01 % levelSignal/Noise ~ 7
Absorbance [mAU]1000
400
800
200
0
600
0 1 2 3 Time [min]
Unprecedented sensitivity for EE determinations shown by five consecutive runs of 0.005 µg of a Racemic mixture of Warfarin.
Unprecedented reproducibility for EE determinations – here five consecutive runs of 50 µg of a Racemic mixture of Warfarin.
Noise levels [mAU]0.125
0.075
0.05
0.1
0.025
00
Noise
0.025 - 0.03 mAU
Lowest detector noise ever achieved for SFC measurements with noise levels between 0.025 to 0.03 mAU.
Infinitely more SFC robustnessBased on well-established Agilent Rapid Resolution LC technology, all components have been factory-optimized for SFC operation, making the Agilent 1260 Infinity Analytical SFC System as reliable and robust as any Agilent 1260 Infinity LC. Now you can deploy SFC as a technique for routine analysis in your lab.
And, with one software platform and one world-wide service organization, you get a true single-vendor solution from a name you can trust – Agilent.
Widest application range from small polar molecules up to peptidesThe unique selectivity and speed of supercritical fluid chromatography makes it ideal for a wide range of applications in many industries. Whether you are looking for trace impurities in drug development and QA/QC or developing methods for preparative separations of chiral compounds to replace solvent-consuming normal phase separations, the new Agilent 1260 Analytical SFC system will help you to boost your lab efficiency.
HPLC-like sensitivityThe Aurora SFC Fusion A5 module combines next generation pre- and post-conditioning of supercritical CO2 to achieve the lowest detector baseline noise ever measured using SFC. This translates directly into a 10-fold increase in detection sensitivity and opens the door to attractive new applications such as low level impurity analysis for chiral and achiral analytes or using SFC as orthogonal separation technology.
The new Agilent solution now makes SFC a compelling alternative for any low molecular weight workflow.
Learn more about the 1260 Infinity Analytical SFC System at:www.agilent.com/chem/sfc
Act TODAY – ask your local Agilent representative for a quotation!
© Agilent Technologies, Inc. 2011Published in USA, August 1, 20115990-8796EN
EnvironmentalAnalysis
FoodSafety/Quality
ChemicalQA/QC
DrugDiscovery
DrugDevelopment
DrugManufacturing &
QA/QC
Chiral and achiral compounds
Chiral and achiral small molecules
Chiral and achiral compounds
Chiral and achiral NCEs
Chiral drugs, enantiomeric
excess, impurities
Chiral compounds