advances in materials manufacturing science and technology · advances in materials manufacturing...

12
Advances in Materials Manufacturing Science and Technology Selected Papers from the 11 th International Manufacturing Conference in China September 18 th - 20 th , 2004, Jinan, China Edited by Xing Ai, Jianfeng Li and Chuanzhen Huang l i p TRANS TECH PUBLICATIONS LTD Switzerland Germany • UK • USA

Upload: trinhdan

Post on 28-Jun-2018

214 views

Category:

Documents


0 download

TRANSCRIPT

Advances in MaterialsManufacturing

Science and Technology

Selected Papers from the11th International Manufacturing Conference in China

September 18th - 20th, 2004, Jinan, China

Edited by

Xing Ai, Jianfeng Li and Chuanzhen Huang

l i p TRANS TECH PUBLICATIONS LTDSwitzerland • Germany • UK • USA

Table of Contents

Preface vii

Studies on the Performance of Diamond Thin Films with Different TungstenCarbide Substrates

M. Chen, X.G. Jian, F.H. Sun, Y.P. Ma and Z.M. Zhang 1

Process Technology of Aspherical Mirrors Manufacturing withMagnetorheological Finishing

H.B. Cheng, Z.J. Feng and Y.B. Wu 6

Brazed CBN Grinding Wheel with Ag-Base Filler AlloyW.F. Ding, J.H. Xu, J.B. Lu, Y.C. Fu, B. Xiao and H.J. Xu 11

Effects of Tool Geometrical Parameters on the Chip Formation and Cutting Forcein Orthogonal Cutting

G. Fang and P. Zeng 16

Compositional Design of Multiphase Composite Ceramic Tool Material Based onthe Thermal Shock Resistance and Its Application

C.H. Xu, C.Z. Huang and X. Ai 21

Modeling and Analyzing on Nonuniformity of Material Removal in ChemicalMechanical Polishing of Silicon Wafer

J.X. Su, D.M. Guo, R.K. Kang, Z.J. Jin, X.J. Li and Y.B. Tian 26

Development of a Cutting Database System with Prediction and Analysis FunctionsY. Wan, Z.Q. Liu, X. Ai and J.G. Liu 32

Research on Multifunctional Micro Machining EquipmentB.X. Jia, Z.L. Wang, F.Q. Hu, X.H. Li and W.S. Zhao • 37

Investigation on Performance of QT700-2 Material by Laser PeeningJ.C. Yang, J.Z. Zhou, Y.K. Zhang, C.J. Yang and J.Z. Lu 43

Evaluation and Measurement of Surface/Subsurface Crack Damageof Ground Ceramics

B. Lin, H.T. Zhu, H. Wu, Z.F. Wang and S.Y. Yu 47

Growth of Nanocrystalline Diamond Films on Co-Cemented Tungsten CarbideSubstrates by Hot Filament CVD

F.H. Sun, Z.M. Zhang, H.S. Shen and M. Chen 52

Ultrasonic Machining Mechanism of Sintered Nd-Fe-B Magnetic MaterialsJ.H. Zhang, S.F. Ren, Z.W. Niu, L. Li and M.G. Xu 59

Research on Ultra-Precision Process of STAVAX ESRJ.L. Yuan, F.Y. Lou, Z.W. Wang, M. Chang, W.P. Du and B.C. Tao 63

A Study on the Microstructure of Ti(C,N) Matrix Cermet Tool MaterialC.Z. Huang, L. He, J. Wang and H.L. Liu 67

Strain Path Analysis of an Axisymmetric Part within Controlled Forming ProcessL. Wang , T.C. Lee and L.L. Liu 72

Advances in Materials Manufacturing Science and Technology

Performance of Diamond Segments in Different Machining ProcessesX.P. Xu, Y.B. Hong and S. Chen 77

Development of an Intelligent System for Tool Materials Selectionin High Speed Machining

Z.Q. Liu, X.G. Peng and J.G. Liu 82

Minimum Lubrication Milling of Titanium AlloysA. Hassan and Z.Q. Yao 87

Error Estimate of Approximate Double Circular Arc Interpolated Method forCurve Smoothing

Z.Q. Zhang, Q.S. Yan, Z.D. Zheng and S.B. Chen '. 92

The Effect of the Content of Carbide on the Mechanical Properties of Ti(C,N)Based Cermet

C.Z. Huang, L. He, H.L. Liu and S.L. Wang 96

Modeling of Grinding Force in Constant-Depth-of-Cut UltrasonicallyAssisted Grinding

Y.B. Wu, M. Nomura, Z.J. Feng and M. Kato 101

A Neural Network Approach for Milling Process ControlZ.Y. Yang, T. Huang and Y.M. Yang 107

Correlating Surface Functionality with Machining Conditions in PrecisionMachining Processes

X.C. Luo, K. Cheng and R. Ward 112

The Experiment Research of Diamond Wire-Saw in Quarrying Granitewith High Efficiency

J.S. Zhang, B. Huang, Z. Wang, X.L. Wang and Z.W. Liu 117

Cutting Force Model for Contour Surface Machining of Gear Indexing Cam withFlat End Milling

P.Q. Guo, C.Z. Huang and P. Zhao 122

Study on the Effect of Tool Rake Angle on Cutting Vibration inPrecision Machining

G.C. Wang, L.J. Ma and H.J. Pei 127

Grindability Evaluation of Advanced CeramicsA.B. Yu, L.J. Zhong and X.L. Tian 132

Investigation on the Bonding Strength between the Hard Alloy Cladding Layer andthe Steel Substrate

F.T. Liu, S.X. Song, J.R. Yang, W.L. Huang and Z.Q. Li 136

A New Cooling Nitrogen Gas Generator and Experiments of High Speed Millingof Ti Alloy

N. He, L. Li and X.L. Li 140

Molecular Dynamics Simulation on the Mechanism of Nanometric Machiningof Single-Crystal Silicon

H. Wu, B. Lin, S.Y. Yu and H.T. Zhu 144

A Study on the Vibration Analysis of a Ball Screw Feed Drive SystemY.H. Choi, S.M. Cha, J.H. Hong and J.H. Choi 149

Materials Science Forum Vols. 471-472 xi

Research of the Complex Surface Algorithm Based on Recursive SubdivisionNumeric Control Interpolation

M.J. Chen, W.X. Guo and D. Li 155

The Assessment of Cutting Temperature Measurements in High-Speed MachiningY. Wan, Z.T. Tang, Z.Q. Liu and X. Ai 162

Effect of Hot Pressing Temperature on Mechanical Properties and Microstructureof Si3N4-TiCnano Composites

J. Zhao, X. Ai, X.P. Huang and Z.J. Lu 167

Abnormality Detection by Analysis of Cutting SoundL.Y. Chen, T. Osawa, H. Narita, T. Nakamura and H. Fujimoto 172

Intelligent Error Compensation in CNC Machining through Synergistic InteractionsAmong Modeling, Sensing and Learning

Z.Q. Liu, J.B. Zhang and Z.T. Tang 178

Modern Analysis and Design for the Generalized Lubrication System of InternalCombustion Engine

M. Liu, F.Q. Cheng, X.F. Fan and P.Q. Ge 183

Research of Intelligent Tool Condition Monitoring Technology Basedon Multi-Information Fusion

S.M. Ji, L. Zhang, Y.H. Wan, X. Zhang, J.L. Yuan and L.B. Zhang 187

Removal Mechanism in Wire-Sawing of Hard-Brittle MaterialJ.F. Meng, J.F. Li, P.Q. Ge and W. Gao 192

Tool Condition Monitoring Based on an Adaptive Neurofuzzy ArchitectureP. Fu, A.D. Hope and G.A. King 196

Three-Dimensional Finite Element Analysis of Metal Powder CompactionP.Q. Chen, W. Xia, Z.Y. Zhou, W.P. Chen and Y.Y. Li 201

Effect of Whisker Content on Mechanical Properties and Microstructure ofHydroxyapatite-SiCw Composite Bioceramics

Z.W. Niu, J.H. Zhang, S.F. Ren, L. Li and M.G. Xu 206

Study on Groove Optimization Technology Based on the Power Spectrum AnalysisZ.J. Li, Y.N. Cheng, G.Y. Tan, S.Y. Ning and Z.G. Wang 211

Modeling of Computer-Controlled AC Servo Feed SystemZ.Y. Xi, C.H. Lu and J.C. Zhang 216

Mechanical Properties and Microstructure of Self-Lubricating Ceramic CuttingTool Materials

J.X. Deng, T.K. Cao and J.L. Sun 221

Fast Consolidation of Iron Powders by Pulse Electric Current SinteringY.Y. Li, Y. Long, X.Q. Li, W.P. Chen and W. Xia 225

Development of 3-D Parameterized Design System for Involute Gear PartsH. Gao, K. Zhao and Y. Lu 230

Study on Multi-Dimension Integration Technology of CAPP/PDMZ.L. Jiang, Z.Q. Li, C.Z. Huang and S.H. Feng 234

Study on the Micro-Topography and Texture Characteristic of Machined Surface inHigh Speed Turning for Carbon Steel

B.Y. Ye, J. Xu, X.C. Liu and Y.M. Quan 238

xii Advances in Materials Manufacturing Science and Technology

Microstructure and Mechanical Properties of two Kindsof A^Os/SiC Nanocomposites

H.L. Liu, C.Z. Huang, J. Wang and J. Sun 243

Formation and Flanging Burrs Control of Three-Dimensional Substructure onCopper Surface

Y. Tang, W. Liu, Z.Q. Wu and S.W. Yang 248

Development of New Multi-Dimension Squeezed Penetration Piling MachineS.Q. Huang, Y.M. Han and Y.D. Wang 255

A Study on the Microstructure of Nano-Scale Ceramic Tool MaterialsB. Zou, C.Z. Huang, H.L. Liu and S.L. Wang 260

Application of Hybrid Fuzzy PID Control to Auxiliary Workpiece TableD.W. Zhang, Y.L. Tian and B. Yan 264

Theoretical and Experimental Study on Optimum Design of Gear ProfileModification Curves

S.S. Zhang, J.Z. Zheng and L. Cheng 269

Processing and Mechanical Properties of Biphasic Calcium-Phosphate/Poly-L-Lactide Composite Biomaterials

C.Y. Tang, N. Ignjatovic, D.P. Uskokovic, P.S. Uskokovic, K.C. Chan, S.C.L. LoandT.C. Lee : 273

The Application of Numerical Control Based on Network Manufacturing in PlasticWindow Production

X.B. Ze, H. Ding, H. Wang and X.Q. Wang 278

Preparation of Agglomerate-Free Starting Powders for TiCp-Reinforced/?-SiAlON Nanocomposites

Z.J. Lu, X. Ai and J. Zhao 282

Study on Machining of Hard-Brittle Materials with Thin-Walled Monolayer BrazedDiamond Core Drill

H.H. Su, H.J. Xu, B. Xiao, Y.C. Fu and J.H. Xu 287

Cutting Forces in Sawing Process of Reinforced ConcreteC.Y. Wang, Y.N. Hu and H.N. Ding 292

New Heat Flux Model in Surface GrindingL. Zhang, P.Q. Ge, J.F. Meng, J.H. Cheng and M. Wang 298

Study on the Mechanism of High Speed Small Hole Drilling by EDMS.L. Ye, J. Su, Z.X. Jia and R. Hua ., 302

Effect of Cutting Parameters on Integrality of Machined Surface in Hard CuttingX.L. Liu, F.G. Yan, Y.F. Li, Y.J. Wang and H.M. Pen 307

Optimal Control of Active Ambulance Stretcher SuspensionL.L. Sun and K.J. Song 312

Precision Finishing Combined with ELID and MRFG.W. Kang, F.H. Zhang and S. Dong 317

Effect of TiN Addition on Microstructure and Mechanical Properties of ZirconiaMatrix Ceramic Tool Material

J. Sun, C.Z. Huang, H.L. Liu and S.L. Wang 321

Materials Science Forum Vols. 471-472 xiii

On CNC Machining and Part Program Preprocessing Based on STEP-NCC.R. Zhang and R.L. Liu 326

A New Model for Predicting Small Crack Growth RatesH.C. Zhang, K.Z. Huang and J.H. Cheng 330

Symmetric Fuzzy Prediction of Cutting Force Uncertainty Based on Maximum-Minimum and Mean Values

, W.P. Wang and K.S. Hu 335

Experimental Investigation on the High-Speed Machining of Hardened SteelY.M. Quan, C.Y. Wang and Z.W. He 339

Solutions for Interpreting STEP-NC Based Part ProgramR.L. Liu and C.R. Zhang 344

Microstructure and Mechanical Properties of Ti(C,N)-Zr02-Ni-MoComposite Cermet

L. He, C.Z. Huang, J. Sun and H.L. Liu 348

The Advancement of SPM-Based NanolithographyL.B. Zhang, J.X. Shi, J.L. Yuan, S.M. Ji and M. Chang 353

A Method to Forecast the Cohesive Zone of Blast FurnaceS.Z. Li, J. Cheng and W.Q. Ma 358

Investigation on Material Removal Rate in Rotation Grinding for Large-ScaleSilicon Wafer

Y.B. Tian, R.K. Rang, D.M. Guo, Z.J. Jin and J.X. Su 362

A Study on the Mechanical Properties of Ti(C, N) Based Ceramic Tool MaterialS.L. Wang, L.Q. Xu, C.Z. Huang and H.L. Liu 369

Surface Quality Analysis of Milling Hardened Die Steel with Micro-End MillY.N. Hu, C.Y. Wang, J.L. Wang and Z. Qin ..- 374

Tool Geometry Effect on Machined Surface Integrity in Precision TurningHigh-Strength Spring Steel

H.X. Wang, W.J. Zong, Y.C. Liang and S. Dong : : 380

Superplastic Bulging of an Al-6Mg-0.3Sc Alloy and Its Forming LimitsG.Q. Tong, K.C. Chan and T.G. Nieh 385

Evaluation on Died-Pressed Binders of Ti(C,N)-Based Cermet PowdersC. Fan, W.H. Xiong, J. Wei, P. Feng, Y. Lei and Z.G. Liang 390

Study on the Thrust Cutting Force in Ultrasonic Elliptical Vibration CuttingC.X. Ma, E. Shamoto and T. Moriwaki ;. 396

Research Status Quo of Simulation Design Methods for Ceramic Tool MaterialsL.Q. Xu, C.Z. Huang, S.L. Wang and H.L. Liu 401

Studies on Exploiting Further the Potential of High Efficiency GrindingY.C. Fu, HJ. Xu and F.H. Sun 405

Mathematical Description of Spatial Hob-Generating Motion for an Arbitrary GearTooth Profile

X.Y. Feng, H. Li and X. Ai 409

Experimental Study on High Speed Milling of Ti AlloysL. Li, N. He and J.H. Xu 414

xiv Advances in Materials Manufacturing Science and Technology

Local Region Mahalanobis Distance Feature and Its Application in MonitoringWearing and Breakage States of Cutting Tools

S.M. Ji, L. Zhang, Y.H. Wan, X. Zhang, J.L. Yuan and L.B. Zhang 418

A New Type of Non-Chisel-Edge Shallow-Drill for Machining High Manganese SteelY.P. Han, J.F. Meng and J.Q. Zhou 422

Fabrication of Ultra-Fine Diamond Abrasive Tools by Sol-GelJ. Liu and X.P. Xu 426

Wear of High Speed Steel Bi-Metal Bandsaw Blade when Cutting AvestaPolarit17-7 Stainless Steel in the As-Cast State

M. Sarwar, M. Persson and H. Hellbergh 431

Recent Developments in Tool Materials for High Speed MachiningZ.Q. Liu, Y. Wan and X. Ai 438

A Study on Warm Compacting Behaviors of 316L Stainless Steel PowderZ.Y. Xiao, M.Y. Ke, W.P. Chen, D.H. Ni and Y.Y. Li 443

Plasma-Particle Interaction in Spray FormingJ.C. Fang, W.J. Xu and Z.Y. Zhao 448

Study on Technology of Flexible Forming of Sheet Metal Basedon Laser Shock Waves

Y.K. Zhang, J.Z. Zhou, D.W. Zuo, J.C. Yang and L. Cai 453

Electrical Discharge Grinding of Polycrystalline DiamondJ.Y. Pei, C.N. Guo and D.J. Hu 457

Modelling the Depth of Jet Penetration in Abrasive Waterjet Contouring ofAlumina Ceramics

J. Wang, H. Liu and C.Z. Huang 462

Wear Mechanism of Diamond Mills in Stone CuttingB. Huang,-Z.W. Liu, J.F. Li, J.S. Zhang and Z. Wang 469

Research on Ultra-Precision Machining Technology for KTPJ.L. Yuan, F.Y. Lou, Z.W. Wang, M. Chang, W.P. Du and Q.F. De 473

Two Approaches for Greenization of Fixture Design and CorrespondingTechnology Innovation

K.M. Zhong, P.Q. Guo and Q. Chi 477

Development of Endless Diamond Wire Saw and Sawing ExperimentsP.Q. Ge, L. Zhang, W. Gao and Z.C. Liu 481

Neural Network Prediction of Segment Wear in Stone SawingX.P. Xu and Y.F. Zhang 485

A Study on Computer Simulation of Plastic Lens Molding ProcessW. Li, Y.F. Jin, X. Lv and C.H. Kua 490

Design of High Precision Power Supply for Low-Frequency Vibration CuttingX.G. Jiang and D.Y. Zhang 494

Wrinkling Limit Based on FEM Virtual Experiment during NC Bending Processof Thin-Walled Tube

H. Li, H. Yang, M. Zhan, L.G. Guo and R.J. Gu 498

Materials Science Forum Vols. 471-472 xv

Forming Defects Analysis of Auto-Panel Stamped Part with ExperimentalStrain Approach

H.Y. Xiang and Y.X. Zhong 503

Machine Vision and Data Reconstruction for Measuring Free Form SurfaceH.W. Zhang, G.X. Zhang and Y. Shi 508

Development of an Internet-Based Interactive Globoidal Indexing Cam MechanismsDesign System

W. Tang, Y.Q. Zhou and H. Zhang 513

Time Series Model Study on the NC Grinding Process of Isometric Polygonal ProfileD.S. Wang, A.P. Zhou, P.L. Huang and X.Y. Zhao 518

Investigational Advances in Residual Stresses by Hard TurningX.P. Zhang, C.R. Liu and Z.Q. Yao 523

Pneumatic Proportional Position Control System Based on BP Neural NetworksY.J. Liu, X.Z. Kong and Z.W. Li 528

Research on Hierarchical Design Method of Open Modular ArchitectureCNC System

Z.Y. Wu, T.Y. Wang, H.W. Li, W.J. Wang and T.J. Dong 532

A Combined Model of the Active Vibration Control of the Coupled Flexible SystemJ.C. Niu, G.Q. Zhao and K.J. Song 537

Balancing of Tool/Toolholder Assembly for High-Speed MachiningS. Zhang, X. Ai, W.X. Tang and J.G. Liu 542

Numeric Investigation of the Cutting Temperature Fields on the Rake Face inOrthogonal Machining

S.Y. Wang, J. Zhao, H. Meng, X. Ai and Z.L. Li 547

Internet-Based Physical Simulation of Drilling ProcessL.H. Dong, Y.L. Zhao and C.H. Fan 552

Study on the Semi-Active Suspension Control System and Its Stability Basedon T-S Fuzzy Neural Control Strategy .

L. Chen, H.B. Jiang and M.C. Yang 557

Simulation Diagnosis for the Bottleneck of Production Lines and Its ApplicationJ. Zhou, Z.Q. Liu, P.L. Huang, X. Ai and J.X. Deng 563

Experimental Investigation on 3D Laser Forming of Metal SheetL.J. Yang, Y. Wang, M. Djendel and L.T. Qi 568

Fine-Grained Access Control of PDM and CAPPS.H. Feng and Z.L. Jiang 573

The Application of Product Variant Design Based on Case-Based Design in theDevelopment of Stone Equipments

J.K. Wang, X. Ai, J.S. Zhang and Z. Wang 577

Finite Element Simulation of the Orthogonal Metal Cutting ProcessS.J. Chen, Q.L. Pang and K. Cheng 582

Real-Time Error Compensation Technique and Its Applicationon NC Machine Tools

G.L. Liu, H.T. Zhao, G. Turyagye, Y.Q. Ren, J.G. Yang, W.Z. Chen and S.W. He 587

xvi Advances in Materials Manufacturing Science and Technology

The Inverse Kinematics Algorithm of Redundant DOF RobotY. Wang and L. Wang 592

Optimization of Technological Parameters in the Calescent Superplastic BulgeForming of Ti-6A1-4V Alloys Sheet Based on Fuzzy Neural Network

M.H. Chen, L. Gao, Z.S. Zhu, D.W. Zuo and M. Wang 596

The Architecture of Reliability Information System for CNC Machine Tool inConcurrent Engineering

Q. Zhang, S.J. Liu, C.Y. Duan and Y.M. Zhu 603

Balanced Octree for Tetrahedral Mesh GenerationKM. Au and K.M. Yu 608

The Objectives Decision Making Study in Product Innovation Development ProcessBased on TRIZ Technology Evolution Theory

F.Y. Zhang, Y.S. Xu and D.J. Hu .'. 613

Research on Surface Quality Control of Moulds Formed by Plasma Arc SprayingQ.L. Deng, K.K. Sun, G.C. Zhou, J.L. Song, Y. Wang and D.J. Hu 620

An Experimental Study of Specific Energy in Grinding GraniteY.Q. Yu, Y. Li and X.P. Xu 625

Overview on Measuring Methods of Bond Strength of Cladding MaterialJ.R. Yang, Z.Q. Li and C.Z. Huang 630

Feed Rate and Depth of Cut Influence on Cutting Forces in Diamond TurningAluminium Alloy

H.X. Wang, W.J. Zong, D. Li and S. Dong 634

A Study on Vacuum Brazing Procedure of Plate Heat ExchangerS.S. Zhang, Y.H. Cheng and L. Cheng 640

Study on Hole Making in EACVD Thick Diamond FilmD.W. Zuo; W.Z. Lu, X.F. Li, X.Q. Chu and M. Wang 644

Finite Element Analysis for Deformation of Toolholder/Spindle Interface Systemat High Rotation Speed

D.L. Wang, T.H. Li and D.C. Kang 649

Application of Wavelet Digital Filter of Fourier Transform Profilometryin 3-D Measurement

Y.S. Wang, S. Fu, J.Q. Xu, C.L. Zhou, S.C. Si and C.Y. Gao 654

Finite Element Analysis of Effects of Ball Burnishing Parameterson Residual Stresses

W.J. Deng, W. Xia, Z.Y. Zhou, W.P. Chen and Y.Y. Li 658

Structure Dynamic Modification and Optimization for High-Speed FaceMilling Cutter

W.X. Tang, X. Ai, H.Y. Wu, S. Zhang and H. Jiang 663

Application of the Hilbert-Huang Transform to Pick Up Surface RoughnessJ.H. Wu, Z.Q. Yao and Y. Jin 668

Integrated Product Design Using Rapid Prototyping Technology and Rapid Toolingin Concurrent Engineering Approach

A.K. Das 672

Materials Science Forum Vols. 471-472 xvii

Web Based Virtual Design of Dynamics of Roller Gear Cam SystemY.Q. Zhou, W. Tang, H. Zhang and B.C. Shi 677

Study and Development of Appliances Recycling Management Information SystemJ.Y. Wang, Z.F. Liu and Y. Lv .....682

Development of Parameters Selection System for Ultrasonic Vibration AssistedElectro-Discharge Machining

Y.J. Hu, J.H. Zhang, X.F. Wang and S.F. Ren 687

An Investigation on High Strain Rate Superplasticity of an Al-Cu-Mg-Ti-SrIngot Alloy

X.J. Xu, L. Cai and S.S. Kim 692

A Monitoring System of Drill Wear States Using a Hybrid Neural NetworkV. Karri and T. Kiatcharoenpol 697

Partial Approximate Symmetry Detection of Geometric ModelC.H. Gao, F. Langbein, D. Marshall, R. Martin, Y. Li and Z. Yang 702

A New Parallel Robot for Steel SnaggingB.F. Feng, H. Shi and G.Q. Cai 707

Development of Nano-TiN Modified Cermet CutterF. Xie, H.D. Yang, C.G. Zhang and N. Liu 711

Study on Preprocessing Methods for Color 3D Point CloudX.D. Zhang, C.K. Sun, C. Wang and S.H. Ye 716

Manufacturability of Fractal GeometryY.C. Yeung and KM. Yu 722

Theoretical Study on Extended Master Model of Mould FeatureB. Zheng, J.K. Sun and Z.L. Jiang 727

Experimental Study on the Milling of a High Strength Titanium AlloyG.S. Geng, J.H. Xu, Y.F. Ge and Y.C. Fu 731

Approach to the Improvement of Laser Cutting Accuracy for Laminated SolidManufacture by Dynamic Compensation

G. Wang and K. Liu ; 736

The Mechanism of Ultrasonic Vibration Improving MRR in UEDM in GasQ.H. Zhang, R.X. Du, J.H. Zhang, J.Y. Yang and S.F. Ren 741

A Study on the Failure Procedure of the Film-Substrate Interface Based on theLaser Scratch Testing Technique

A.X. Feng, Y.K. Zhang, H.K. Xie and L. Cai 746

A Surface Modification Method by EDM and Its Application to Cutting ToolsW.S. Zhao, Y. Fang, Z.L. Wang and L.H. Li 750

Robust Position Controller Design for Linear Servo Units Usedin Noncircular Machining

S.T. Huang, Z.J. Feng, H.B. Cheng and W. Zuo 755

Simulation for Guide Roll in 3D-FE Analysis of Cold Ring RollingL.G. Guo, H. Yang, M. Zhan, H. Li and L.Y. Li 760

The Study on the Dynamic Characteristic of High Speed Machine Tooland Experiment Validate

Y.M. Zhang, X.L. Lin, X.D. Wang and G.Q. Cai 765

xviii Advances in Materials Manufacturing Science and Technology

Method of Product Development Process Analysis and Reengineering forConcurrent Engineering

D.Z.Liu, M.Liu and P.S. Zhong 770

Comparative Experiments for Different End Mills of Indexable Insertswith 3-D Chip Breaker

Y. He and Z.Q. Yao 775

Dispersion and Stability of Nanodiamond in Clean OilX.Y. Xu, Z.M. Yu, Y.W. Zhu and B.C. Wang 779

Mechanism of Electrode Material Removal in Short Pulse Time ElectricDischarge Machining

Z.L. Wang, J.Z. Cui, X.F. Liu and W.S. Zhao 784

An Investigation into Surface Roughness of Burnished Hypereutectic Al-Si AlloyBased on the Taguchi Techniques

L.F. Han, W. Xia, Y.Y. Li and W.P. Chen 790

Process Analysis on a Special Projection Welding with Coupled FEMA.H. Luo and G.L. Chen 795

Particle Swarm Optimization for Vehicle Routing Problem with Time WindowsY.W. Zhao, B. Wu, W.L. Wang, Y.L. Ma, W.A. Wang and H. Sun 801

Module Partition of Equipment for Working Special-Shaped Stones Basedon Function Analysis

Z. Wang, J.S. Zhang, C. Zhang, F.Y. Yu, X.H. Ren and Z.W. Liu 806

Research on Thickness of the Free Confinement Medium in Laser Shock ProcessingR.F. Chen, Y.Q. Hua, J.C. Yang and Y.K. Zhang 811

Investigation on Influencing Factors of AFM Micro Probe NanomachiningY.D. Yan, S. Dong and T. Sun .: 816

Research on the Sintering Process and Performance of Large-Scale Alumina MatrixCeramic Products

X.H. Zhang, C.X. Liu and J.H. Zhang 821

Research and Application on High Efficiency Reversible Cutting TechniqueW.G. Wu, S.Q. Pang and Q.X. Yu 825

Development of PMAC-Based Multifunctional Combined CNC MachineM.Y. Huo, J.Q. Xu, J.H. Zhang, X. Ai and Y.J. Hu 830

The Experiment Analysis and Numerical Simulation on Fractureof Complex-Shaped Part Drawing

Z.Z. Sun, Y.Y. Yang, Y.Q. Chen, J.Y. Li, L.R. Guo and Q.B. Hang 834

Research on Precision Forging Law of Complicated Blade by Using 3D FESimulation and Physical Modeling

M. Zhan, H. Yang and Y.L. Liu 839

Analysis of Step Interference Fit of the High Speed Motorized Spindle with FiniteElement Method

P. Ma, C.X. Liao, M.L. Duan, J.K. Li, D.N. Li and B.L. Zhang 844

Rough Set Data Analysis System and Its Applications in Machinery Fault DiagnosisL.N. Hao, W.L. Chen, X.F. Zhang and W.S. Wang 850

Materials Science Forum Vols. 471-472 xix

Collision and Determination of Workpiece Location in Parallel Mechanism TypeMachine Tools

X.M. Zhao, Y.Z. Bi and H.L. Wang 855

Numerical Simulation of Sheet Deforming Caused by Laser ShockingJ.Z. Zhou, Y.K. Zhang, D.W. Zuo, C.J. Yang and L. Cai 860

A Hybrid Model for Tool Condition Monitoring and Optimal Tool ManagementY.X. Yao, Y. Lu, Z.J. Yuan and J.Y. Hu 865

Direct Joining between Ethylene Propylene Rubber and Cast Iron with FunctionalPolymeric Nanofilm

Z.X. Kang, W.P. Chen, Y. Long, K. Mori and Y.Y. Li 871

Study on the Machining Technology of Composite MaterialsJ.Y. Zhang, Q.X. Yu, S.Q. Pang and Z.F. Zhu 876

Research on Direct Laser Sintering of Ni-AUoy Powder and Microstructure FeatureJ.F. Zhao, Y. Li and J.H. . Zhang 881

Laser Driven Substructural Modification of Austenitic Stainless SteelM. Zhou, X.Q. Zhu, Q.X. Dai and L. Cai 886

Taguchi Methods to Optimize TiN Coating Surface RoughnessS.L. Yim, K.M. Yu, D. Kwok and T.C. Lee 891

Study on Process Decision Methodology for Sheet Metal Stampingby Case Based Technology

W. Liu, Y.Y. Yang and Z.W. Xing 895

Intelligent Pattern Recognition of Manufacturing Features in Engineering DrawingsC.A. Liu, Z.H. Yang and L.M. Zha 900

A New Fabrication Method of Neutron Fresnel LensJ.Q. Guo, H. Ohmori, W. Lin, T. Adachi and H.M. Shimizu : 904

Author Index 909

Keyword Index : 915