Advanced carpetand upholstery protection

AUTHORISED APPLICATOROnce fabric is guarded...

Fibrerite is the finest Fibre/Fabric protector for all synthetic and natural materials (upholstery, carpets, curtains etc). Whether a stain can be removed from a fibre depends upon the fibre, the colour of the fibre, the staining material and how the stain is treated. Follow manufacturer’s cleaning instructions if possible before using the following guide.

If a spill occurs, absorb the residue by dabbing gently with a cloth, dab dry until all the spill is removed. Do your best not to let the spill dry. If this occurs, start by dabbing the stain with a moist cloth soaked in warm detergent water.

AUTHORISED LICENSED APPLICATOR

Textile Cleaning Solutions Ltd, Centre House, Coker Road, Worle Industrial Estate,

Weston Super Mare BS22 6BX

01934 521155sales@texatherm.com • texatherm.com

Protect you investment

Some of the most costly investments in your home are your carpets and upholstery, that’s one of many reasons why we recommend you protect them with Fibrerite.

Fibrerite protects from oil and water based spills such as coffee, colas, oil, polish, also from common grit and grime that soils, dirts and dulls their colour and appearance.

Why is Fibrerite better?Most Fibre protectors are either Silicone or Fluoro-chemical, each having its own abilities. Fibrerite protector is based on a newly developed chemical technology and is a U.V. stable advanced polymer chemical that combines the advantages of both. It gives better protection than water based Fluoro-Chemicals because it coats the entire

fibre with a superior protective coating without any odour and unlike silicones it repels against oil, dirt and grime. Because Fibrerite is U.V. Stable its effectiveness will not be diminished by U.V. rays such as sunlight.

Benefits

● Protection against damage from water & oil based stains.

● Carpets stay cleaner longer - allows far greater removal of particular matter when vacuuming.

● Upholstery and carpets life will be extended.

● Enhanced appearance.

● Not harmful to the environment.

Treated Carpet - Water Based Stain

Untreated Carpet - Water Based Stain

Fibrerite ProtectorWater Based Protector

Untreated Carpet - Oil Based Stain

Treated Carpet - Oil Based Stain

High Quality UV Stable Carpet & Upholstery

ProtectorNaturally Aircures

Fibrerite protector is based on a uv stable polymer chemicaltechnology and is a water based system. Fibrerite can be applieddirectly onto a wet or dry carpet. The active ingredients will givemaximum protection against water and oil based stains. Unlike otherprotectors the quick drying properties of Fibrerite require no drying or airingat high temperatures and will naturally 100% air cure.

HANDLING, SAFETY AND STORAGE

CHIP/CDG CLASSIFICATION: NON-REGULATED

• For professional and industrial use only.• Keep out of reach of children.• When spraying ensure you wear a mask and do

not inhale spray.• Make sure area is well ventilated.• Wear suitable gloves.

• Avoid contact with eyes & skin.• In case of contact with eyes, rinse immediately

with plenty of water, if irritation persists seek medical advice.

• Do not allow to freeze.

Textile Cleaning Solutions Ltd, Centre House, Coker RoadWorle Industrial Estate, Weston Super Mare BS22 6BXTel: 01934 521155 Fax: 01934 521166 www.texatherm.com

DIRECTIONS 1. Fibrerite Protector is ready to use from the container. Do not dilute. Apply

Fibrerite in a clean container free of Alkaline residues. Do not use on Sisal, Jute or other water sensitive fi bres.

2. Always pre-test carpet and fabric for any change in colour, shade or texture before proceeding with application.

3. Soiled carpet and fabric: Thoroughly clean the area to be protected before application. Ensure that Alkaline residues are neutralised by spraying or extraction rinsing with Tex-Rinse.

4. Apply Fibrerite using a suitable pressure sprayer fi tted with a 8002 fan spray tip for carpets and an 8001 tip for fabric. Coverage will be dependant oncarpet or fabric density. Approximate rate of coverage: 40 - 60m2 per 5litres.

5. Spray apply evenly at 2bar (28.5psi). Then repeat in a crossing patternensuring the whole fi bre is coated. Do not saturate the carpet. Two evencoats whilst brushing with a suitable pile or hand brush should ensure thatthe whole fi bre is coated.

6. Immediately wipe overspray from all other surfaces. Replace furniture on protective pads and allow carpet to dry before use. Fi

brer

ite® Carpet & Upholstery Protector

pH7 5L

SAFE TO USE ON WOO

L

TESTED

SAS FE

TOTT USE ON WO

WWOO

L

TESTED