68037 physical modelling subject organisation
TRANSCRIPT
Subject Coordinator: Dr Jurgen Schulte 1
68037 Physical ModellingSubject Organisation (general)
Lectures Practicals Tutorials Assignments
Pre-work and Post-work
In this presentation: Subject Organisation (general) Subject Organisation (specific) Subject ResourcesWeekly RoutineLaboratory Work
Subject Coordinator: Dr Jurgen Schulte 2
68037 Physical ModellingSubject Organisation (specific)
Pre-Lecture (1h @ home)
Lecture (1.5h)
Reading material @UTS Online
Lecture expands on reading material but does not cover it again
Reading assignments @ WileyPLUS
Pre-lab(1h @ home)
Practical(2-3 h)
Post-lab(1h @ home)
Project groups coordinate to produce detailedproject plan
Project Experiment may commence if project plan has been approved
Individual project report submitted @ UTS Online within 7 days after prac
Reading material @UTS Online
Reading material @UTS Online
Tutorial (1h)
Study material @ WilePLUS
Assignments(2h @ home)
Study & practisematerial @ WilePLUS (ORION)
30% 50%
20%
Final Exam (2h)
Subject Coordinator: Dr Jurgen Schulte 3
68037 Physical ModellingSubject Resources
UTS Online
Pre-Lect/Tute Material Practical Resources Additional Reading
Assigned Pre-Lecture MaterialSolved & Annotated problems
How to Use videos for some of the sensors
Physics Concepts
Post-Lecture Material Applications in practice and Concepts Terms used in Physics (detailed explanations)
Tutorial Study Material
Link
Page
UTS Online (Laboratory)
Prac Support Material Consultant Team Report Guideline
Consultant Team Report Guideline
Report Writing Guide Consultant Team Report Guideline Consultant Team Report Guideline
Data Analysis Guide Sensors used
Graphing Guides Equipment manuals
Link
Page
Subject Coordinator: Dr Jurgen Schulte 4
68037 Physical ModellingWeekly Routine
Student
Pre-Lecture Work Pre-lab Work Post-lab Work Assignment Tutorial
Read/view pre-lecture material required topic
Study Project Experiment relevant concepts
Complete individual Project Experiment report within 7 days
Practise problem solving @WileyPLUS (ORION) to maximum proficiency (1-2h)
Complete tutorial practise problems @ WileyPLUS
Read/view terms and concept videos
Complete project plan
Complete WileyPLUS reading assignment
Task
Home
Lecturer
Lecture Laboratory Assignment Tutorial
Test pre-lecturematerial
Discuss project plans withteams
Monitor every single WileyPLUS(ORION) progress
Problem solving examples
Cover topics of the week
Project team Q&A Q&A Show tricks of the trade
Q&A and advise
Task
Uni
Subject Coordinator: Dr Jurgen Schulte 5
68037 Physical ModellingLaboratory Work
Commissioning Organisation
Work Commissione
d
Contract value: $2,500
Consumer advocacy
organisation
Physical parameters
that differentiate
consumer product from
competing products
Marketing Firm
Manufacturer
Your project experiment team: Product Testing EngineersDeliverables: Commissioned project report (valued @ $2,500)Access to equipment including setting up and cleaning up: 2h 30min per project
The commissioning organisation will reject the report if it contains serious flaws (incorrect reporting, incorrect physics, contains plagiarised material )
Commissioning Organisation
Aspects ofParameters
Consumer advocacy
organisation
SafetyValue
Convenience
Marketing Firm Guidance to differentiate
product
Manufacturer PerformanceSafety
Subject Coordinator: Dr Jurgen Schulte 6
68037 Physical ModellingWileyPLUS
Lecture Notes
WileyPLUS (ORION) Assignments
posted weekly
What to find @ WileyPLUS: Lecture Notes (end of week)Worked Tutorial Problems (eond of week)Reading Assignments (all semester)Practise Problems (all semester)ORION Assignments (all semester)
Tutorial Problems Reading Assignments
Open for continuous practice and submission throughout the semester
to reach yourmaximum proficiency in
problem solving