3d site safety plans

44
3D Site Safety Plans John Chiusano, RA April 23, 2012 – Times Square Marriott Marquis

Upload: phungque

Post on 30-Dec-2016

231 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: 3D Site Safety Plans

3D Site Safety Plans

John Chiusano, RAApril 23, 2012 – Times Square Marriott Marquis

Page 2: 3D Site Safety Plans

The NYC Department of Buildings is a registered Provider with The American Institute of Architects Continuing Education Systems (AIA/ CES). Credit earned on completion of this program will be reported to AIA/CES for AIA members. Certificates of Completion for both members and non‐AIA members are available upon request.

This program is registered with the AIA/CES for continuing professional education. As such, it does not include content that may be deemed or constructed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product. 

Questions related to specific materials, methods, and services will be addressed at the conclusion of this presentation.

Page 3: 3D Site Safety Plans

This presentation is protected by US and International Copyright laws.  Reproduction, distribution, display and use of the presentation without written permission of the speaker is prohibited.

©NYC Department of Buildings

Copyright Materials

Page 4: 3D Site Safety Plans

Three‐dimensional representations of site safety construction logistics is becoming more common, and this technology is expected to become the construction industry’s standard. This software provides site managers and construction regulators with an interactive, animated 3D model, allowing users to take virtual tours of a project and “view” the safety challenges – all before the first shovel hits the ground. This seminar will help participants gain a broad understanding of this emerging technology, why it is important to use and how it could prevent potential safety issues.

Through electronic visual examples and written samples, participants will complete the program with an understanding of the provisions outlined in Chapter 33 of the NYC Building Code and be able to submit acceptable site safety plans as required by the Department of Buildings. In addition, they will comprehend the critical importance of pre‐planning and collaboration between the contractor, designer and site safety managers. Finally, participants will understand the limitations of two‐dimensional plans and how to improve upon them if they are not yet using 3D software. 

Course Description

Page 5: 3D Site Safety Plans

Learning Objectives

At the end of this program, participants will have learned:

• Common construction site safety plan obstacles through the use of examples and analyze logistics

• The complexities of two-dimensional site safety plans and their limitations

• How to virtual tour a project to demonstrate a design that meets the requirements of Chapter 33 of the NYC Building Code

• How to use 3D modeling software to identify potential safety issues

Page 6: 3D Site Safety Plans

Common Construction Site Plan Obstacles

The Evolution

• 2D submittals using hand drafting and Visio

• 2D submittals using CAD

• Now, there are 3D plans using:

• Revit

• Navisworks

• Auto CAD

Page 7: 3D Site Safety Plans

2D Site Safety Plans Submitted

Sheet #1 Title sheet job identification information

Sheet #2 General Information

Sheet #3 Egress 

Sheet #4 Demolition Phase

Sheet #5 Excavation Phase

Sheet #6 Foundation Phase

Sheet #7 Superstructure Phase 

Sheet #8 Adjoining Property Protection Plan

Sheet #9 Sections/Elevations Showing Horizontal Protection

Sheet #10 Standard Details

Sheet #11 General notes

Today: A Phased Approach

Page 8: 3D Site Safety Plans

DN DN

S1

S3

S1 S3

S6

S7

S8

S5

S11

S12S13

S11

S9

S10

327 E 26TH STREET

421 1ST AVENUE334 E 25TH STREET 335 E 24TH STREET

420 E 23RD STREET

462 1ST AVENUE

EXISTING HYDRANT

23384 SF

CONSTRUCTIONSITE

SG2

DG

EXISTING HYDRANT

EXISTING HYDRANT

EXISTING PARASITOLOGY

BUILDING TO REMAIN

TIMBER BARRIERS

FOR TEMPORARY

5'-0" WALKWAY

TIMBER BARRIERS

FOR TEMPORARY

5'-0" WALKWAY

TIMBER BARRIERS

FOR TEMPORARY

5'-0" WALKWAY

125' - 0"

EXISTING TREE

(REMOVED)

EXISTING TREES

(PROTECTED)

EXISTING TREES

(PROTECTED)

PARASITOLOGY

ENTRANCE

PUBLIC TELEPHONES

TEMPORARILY

REMOVED DURING

CONSTRUCTION

BIKE PATH RELOCATED

TEMPORARILY

(REVISE PAINT SCHEME)

EXISTING CONCRETE

MEDIAN TO REMAIN

NEW CONSTRUCTION FENCE

SEE DETAIL 1/SSP-801

14' - 10 1/4"

20' - 0"

MG

WELDING CAGE

PORTAJOHN

TRUCK WASH

WELDING MACHINE

EXISTING CONCRETE

MEDIAN TO REMAIN

SECURITY BOOTH

EAST 26TH STREET

ONE-WAY FOR LIFE OF PROJECT

EAST 25TH STREET

ONE WAY

FIRST AVENUE

ONE WAY

TRUCK

WASH

334 E 26TH STREET

14' - 3"

15' - 3"

25' - 6 1/4"

TURNER FIELD TRAILERE/F SVB FIELD TRALER

32' - 0" 32' - 0"

EXISTING SIGNS REMOVED

FOR PROJECT DURATION

NEW SIGNS FOR

DURATION OF

TRAFFIC REVISION TS1

7' - 0" TEMPORARY WALKWAY

SG1

PB1

STORAGE CONTAINERS

FLAGMEN DURING

INGRESS/EGRESS ACTIVITIES

FLAGMEN DURING

INGRESS/EGRESS ACTIVITIES

FLAGMEN DURING

INGRESS/EGRESS ACTIVITIES

SITE FENCE

8'-0" HEIGHT TYP.

SEE 1/SSP-801.00

SITE FENCE

8'-0" HEIGHT TYP.

SEE 1/SSP-801.00

NEW WHITE

"STOP STRIPE"

NEW ARROW

HASHMARKS FOR

BIKE LANE PER D.O.T.

TS1

TRUCK WASH

11' - 0" 11' - 0" 11' - 0" 11' - 0" 10' - 0"

20' - 0"

20' - 0"

4' - 0"

FE

PB2

FE

PB2

FE

FE

Existing Site

PB2

Existing Site

PB1

PB2

PROJECT INFORMATION BOARD-SEE 3/SSP-801.00

PERMIT DISPLAY CASE

LEGEND

Scale

Project number

Date

Drawn by

Checked by

OWNER:

NEW YORK UNIVERSITYOFFICE OF CONSTRUCTION MANAGEMENT

10 ASTOR PLACE - 6TH FLOOR

NEW YORK, NY 10003

212-998-4886

CONSTRUCTION MANAGER:

TURNER CONSTRUCTION375 HUDSON STREET

NEW YORK, NY 10014

212-229-6000

EXECUTIVE AND COLLABORATING ARCHITECT:

EYP225 VARICK STREET

NEW YORK, NY 10014

917-981-6000

DESIGN ARCHITECT:

KOHN PEDERSEN FOX11 WEST 42ND STREET

NEW YORK, NY 10036

212-977-6500

STRUCTURAL ENGINEER:

ROBERT SILMAN ASSOCIATES88 UNIVERSITY PLACE

NEW YORK, NY 10003

212-620-7970

MEP ENGINEERING

BARD, RAO + ATHANAS105 MADISON AVENUE

NEW YORK, NY 10016

212-840-0060

CIVIL ENGINEER:

LANGAN360 WEST 31ST STREET

NEW YORK, NY 10001

212-479-5400

As indicated

SSP-104.01

SITE EGRESS ANDMAKE-READY

MEC 11-328

COLLEGE OF NURSING,COLLEGE OF DENTISTRY

AND BIOENGINEERINGINSTITUTE

NEW YORK UNIVERSITY

2012-01-09Author

TG

1/16" = 1'-0"SSP-104.01

1 SITE PLAN: EGRESS AND MAKE-READY

EXISTING DOT SIGNAGE LEGEND

SIGN TYPE TEXT

S1 NO PARKING 8AM-6PM EXCEPT SUNDAYS3 ALL TRAFFICS5 NO STANDING ANY TIME

S6 NO STOPPING ANY TIMES7 1 HOUR PARKING 9AM-7PM EXCEPT SUNDAYS8 NO STANDING EXCEPT AUTHORIZED VEHICLESS9 7AM-7PM DOCTORS VEHICLES ONLYS10 PAY AT MUNIMETERS11 NO PARKING 7AM-7PM MON THRU FRI

S12 NO STANDING 8AM-6PM MON THRU FRI EXCEPT AUTHORIZED VEHICLESS13 NO PARKING 930-11AM TUES AND FRI

SSP-104.01

2 001 MAKE READY AXONOMETRIC

ADJACENT BUILDING SCHEDULE

ADDRESS OWNER

429 1ST AVENUE NEW YORK UNIVERSITY334 E 26TH STREET NEW YORK UNIVERSITY

327 E 26TH STREET NYC DEPARTMENT OF HEALTH

421 1ST AVENUE NEW YORK UNIVERSITY334 E 25TH STREET NEW YORK UNIVERSITY335 E 24TH STREET NEW YORK UNIVERSITY420 E 23RD STREET DEPARTMENT OF VETERANS AFFAIRS462 1ST AVENUE DORMITORY AUTHORITY OF THE STATE OF NEW YORK

1. BRACE NORTH FOUNDATION WALL OF

PARASITOLOGY IF REQUIRED.

2. REMOVE EXISTING FOUNDATION WALLS AND

SLAB ON GRADE.

3. UNDERPINNING NOT REQUIRED.

4. SHORING NOT REQUIRED.

5. TENTATIVE START DATE: 2/15/2012

6. PHASE DURATION: 2 WEEKS

SCHEDULES

NOTES

No. Description Date

2 DOB Comment Review 1/9/2012

6 DOB Comment Review 3/14/2012

Basic 2D CAD Drawing

Page 9: 3D Site Safety Plans

Basic 3D DWG File

Page 10: 3D Site Safety Plans

Basic 2D CAD Drawing

Page 11: 3D Site Safety Plans

Basic 2D CAD Expanded Drawing

Page 12: 3D Site Safety Plans

Basic 3D DWG File

Page 13: 3D Site Safety Plans

Basic 2D CAD File

Page 14: 3D Site Safety Plans

Basic 3D DWG File

Page 15: 3D Site Safety Plans

Limitations of 2D Plans vs. 3D Models

Let’s look at and discuss some examples

• 2D Submittals done using CAD

• 3D plans in Revit, Navisworks & Auto CAD

Page 16: 3D Site Safety Plans

Basic 2D CAD Drawing: Roof Protection

Page 17: 3D Site Safety Plans

Basic 3D CAD Drawing:Roof Protection

Page 18: 3D Site Safety Plans

Basic 3D CAD Drawing:Roof Protection

Page 19: 3D Site Safety Plans

Basic 2D CAD Drawing: Superstructure

Page 20: 3D Site Safety Plans

Basic 3D CAD Drawing:Superstructure

Page 21: 3D Site Safety Plans

Basic 3D CAD Drawing:Superstructure

Page 22: 3D Site Safety Plans

Using 3D Walkthroughs for

3D Perimeter

3D Exterior

Compliance Reviews

Page 23: 3D Site Safety Plans

Using 3D Models to Identify Safety Issues

• Edge of the excavation/foundation protection

• Elevation changes and protective measures

• Checking for issues of clearance

• Checking if areas at the perimeter are unprotected

Page 24: 3D Site Safety Plans

Excavation & FoundationProtection

Page 25: 3D Site Safety Plans

Changes in Elevation

Page 26: 3D Site Safety Plans

Clearance Issues

Page 27: 3D Site Safety Plans

Clearance Issues

Page 28: 3D Site Safety Plans

Clearance Issues

Page 29: 3D Site Safety Plans

Clearance Issues

Page 30: 3D Site Safety Plans

Protected Perimeter

Page 31: 3D Site Safety Plans

Protected Perimeter

Page 32: 3D Site Safety Plans

Protected Perimeter

Page 33: 3D Site Safety Plans

3D Site Safety Plans: User Guide

• Getting Started

• Registering to Share 3D Site Safety Plans with the Department

• Uploading 3D Site Safety Plan Files

• Sharing Uploaded 3D Site Safety Plans with the Department 

• 3D Site Safety Plan Modeling Program Object Naming and Item Detail Requirements

• Technical Considerations

• Contact Information and Troubleshooting

Page 34: 3D Site Safety Plans

Getting Started

1. Open your desktop web browser and visit http://www.zoho.com/docs

2. Click on “Sign‐Up Free” which appears in red text in the top‐right portion of the web page

Page 35: 3D Site Safety Plans

Registering to Share 3D Site Safety Plans

The “Account Information” window should then display. Complete the information requested in the window and click on “Sign‐Up Now” to continue

Page 36: 3D Site Safety Plans

Uploading 3D Site Safety Plan Files

1. Log into your Zoho Docs account

2.Click the down arrow next to “Upload” and select the Bulk Upload

3. Click on “Browse” to find the file on your local computer to upload. Then click on “Upload” when you are ready to upload that file to Zoho Docs.

Page 37: 3D Site Safety Plans

Sharing Uploaded 3D Site Safety

1. From your Zoho Docs main page, click in the check box next to the file(s) you want to share with/submit to the Department

2. Click on either the “Share” tab at the top of the page or on the share icon that displays to the right of the file you want to share with the Department

Plans with the Department

Page 38: 3D Site Safety Plans

3. On the “Share Document” screen that appears, enter “NYCBuildings.BIM” under “Enter Zoho/Email ID” and select the “Collaborators” radio button option from “Add as:” on the “Private Share” tab. Once done, click on “Share”

4. If your file was shared successfully with the Department, “Shared Successfully” will appear

Sharing Uploaded 3D Site SafetyPlans with the Department

Page 39: 3D Site Safety Plans

Object Naming & Item Detail Requirements

1. Perimeter Enclosure

2. Street and Sidewalk Information

3. Trucks, Earthmovers, Mobile Cranes

4. Standpipe Riser

5. Vertical Netting & Guardrails

6. Temporary & Permanent Stair and Egress

7. Fire Extinguishers

8. Shoring/Underpinning

9. Ramps

10. Project Board

11. Permit Board

12. Owner

13. Contractor

14. Construction Superintendent/ Project Executive

15. Site Safety Coordinator/Manager

16. Concrete Safety Manager

17. Construction Site Fire Safety Manager

18. Flag Persons

Page 40: 3D Site Safety Plans

Technical Considerations

• Web Browsers – Zoho Docs supports the current versions of popular web browsers such as Internet Explorer, Firefox, and Safari

• Firewalls – the Zoho service is designed to work automatically with most firewalls as long as the end user has internet access

• File Size Limitations – 50 MB is the maximum file size supported by the Zoho Docs “Bulk Upload”

Page 41: 3D Site Safety Plans

Contact Information & Troubleshooting

• For issues related to registering your account on ZOHO or with uploading / accessing your 3D Site Safety

• Plan files to your ZOHO account, contact ZOHO Doc support directly at:

http://www.zoho.com/docs/zoho‐docs‐overview.html

• For additional information or to ask questions regarding the Department’s 3D Site Safety Plans Program, please contact [email protected]

Page 42: 3D Site Safety Plans

Electronic Objection

Page 43: 3D Site Safety Plans

Where to Begin

3D Site Safety Plans

Page 44: 3D Site Safety Plans

Questions?This concludes the American Institute of Architects 

Continuing Education Systems Course

NYC Department of BuildingsBuildings University AIA Point of Contact:

Allison Ginsburg [email protected]

212‐566‐4415