24 finch st working drawings

1 MASTER ANGLED TOP 430 3700 ALUMINIUM DBL 9MM TOUGHENED THERMALLY BROKEN W/ARGON

Mark Location Window Style Width Height Material Glazing Remarks

Custom Window Schedule(All windows to be supplied by Stegbar)

2 MASTER ANGLED TOP 430 5720 ALUMINIUM DBL 9MM TOUGHENED THERMALLY BROKEN W/ARGON

3 ENTRY RECTANGLE 640 140 ALUMINIUM DBL 9MM TOUGHENED THERMALLY BROKEN W/ARGON

7 LIVING PARALLELOGRAM 2970 335 ALUMINIUM DBL 9MM TOUGHENED THERMALLY BROKEN W/ARGON

10 DINING RIGHT ANGLE 3975 505 ALUMINIUM DBL 9MM TOUGHENED THERMALLY BROKEN W/ARGON




8 STUDY ANGLED TOP 560 5000 ALUMINIUM DBL 9MM TOUGHENED THERMALLY BROKEN W/ARGON

9 STUDY ANGLED TOP 560 3480 ALUMINIUM DBL 9MM TOUGHENED THERMALLY BROKEN W/ARGON

AWNING

AWNING

AWNING

AWNING

AWNING

AWNING

AWNING

AWNING

AWNING

FIXED

CUSTOM WINDOWS

WINDOW SCHEDULE

DOOR SCHEDULEgeneral notes

N1 USE WRITTEN DIMENSIONS WHERE GIVEN OVER SCALE

N2 THESE PLANS ARE TO BE READ IN CONJUNCTION WITH ANYSTRUCTURAL OR ENGINEERING DRAWINGS AND ASSOCIATEDTOWN PLANNING PERMITS AND DRAWINGS.

N3 SMOKE ALARMS TO BE INSTALLED IN ACCORDANCE WITH AS3786 AND BE HARDWIRED WITH A BATTERY BACK-UP.

N4 ALL WET AREAS TO COMPLY WITH BCA 3.8.1 OR AS 3740 - WALLFINISHEES SHALL BE IMPERVIOUS TO A HEIGHT OF 1800MM ABOVEFLOOR LEVEL TO SHOWER ENCLOSURES AND 15MM ABOVEBATHS, BASINS, SINKS AND TROUGHS IF WITHIN 75MM OF THEWALL.

N5 CONTRACTOR SHALL VERIFY ALL DIMENSIONS, LEVELS, SETBACKSAND SPECIFICATIONS PRIOR TO COMMENCING ANY WORKS OR

ORDERING MATERIALS AND SHALL BE RESPONSIBLE FOR ENSURINGTHAT ALL BUILDING WORKS CONFORM TO THE BCA, A.S CODESCURRENT EDITIONS BUILDING REGULATIONS, LOCAL BY-LAWS ANDTOWN PLANNING REQUIREMENTS

N6 THE BUILDING SHALL BE PROTECTED IN ACCORDANCE WITHAS3660.

N7 ALL DIMENSIONS MUST BE VERIFIED BEFORE THECOMMENCEMENT OF ANY SITE WORKS OR DRAWINGS.. ENGINEERSDRAWINGS MUST NOT BE SCALED. ALL DIMENSIONS NOTED ARE INMILLIMETERES UNLESS NOTED OTHERWISE

N8 ALL ELECTRICAL WORK TO COMPLY WITH AS 3008.1.1 – 2009 –ELECTRICAL INSTALLATIONS – SELECTION OF CABLES AND AS3012 – 2012 – ELECTRICAL

N9 ALL MECHANICAL VENTILATION REQUIREMENTS TO COMPLY WITH AS1668.2 – 2012 – MECHANICAL VENTILATION

N10 ALL WINDOWS REQUIREMENTS AND INSTALLATION TO COMPLYWITH AS 2047 – 1999 – WINDOWS IN BUILDINGS – SELECTION ANDINSTALLATION

N11 ALL GLAZING, INTERNAL AND EXTERNAL TO COMPLY WITH AS1288 – 2006 – GLASS IN BUILDINGS – SELECTION AND INSTALLATIONAND HB 125 – THE GLASS AND GLAZING HANDBOOK

N12 ALL GLAZING IN THE BATHROOM, ENSUITE AND SHOWERS INCLUDING SHOWER DOORS, BATH ENCLOSURES, UNSUPPORTED MIRRORS ANDWINDOWS) SHALL BE 'GRADE A' SAFTY GLAZING MATERIAL.

N13 THE RETAINING STRUCTURE IS TO COMPLY WITH AS 4678 – 2002 –EARTH RETAINING STRUCTURES

N14 SOIL CLASSIFICATION: ADOPT CLASS M, REFER TO ENGINEERS REPORTAND CONFIRM ON-SITE. ADOPT BAL RATING 29

N15 GUTTERS AND DOWNPIPES TO BE IN ACCORDANCE WITH AS 3500.3STORM WATER DRAINAGE AND B.C.A CL3.5.2 AND CL3.1.2

N16 ALL CONCRETE SLABS TO COMPLY WITH B.C.A AND AS 2870RESIDENTIAL SLABS AND FOOTINGS

N17 EXCAVATION OF TRENCHES FOR SEWERAGE, DRAINAGE ETC. TO BECARRIED OUT IN ACCORDANCE WITH CONTROLLING ATHORITIESREQUIREMENTS.

N18 TOP SOIL AND VEGETATION UNDER SLAB TO BE REMOVED.

N19 ROOF SHEETING AND ROOF PENETRATIONS TO COMPLY WITH B.C.A.CL

N20 ROOF AND WALLS MUST BE INSULATED AS PER B.C.A. 3.12.1.1

N21 ALL ELECTRICAL INSTALLATION TO CONFIRM TO AS 3000

N22 ALL MASONRY TO CONFORM WITH B.C.A CL 3.3.1 AND AS 3700MASONRY.

N23 ALL TIMBER FRAME TO CONFORM TO AS 1684.4 AND THE TIMBERFRAMING MANUAL.

N24 METAL LINTELS IN EXTERNAL WALLS TO BE HOT DIPPEDGALVANISED.

N25 WINDOW SIZES ARE NOMINAL ONLY, ACTUAL SIZE WILL VARYACCORDING TO MANUFACTURERE,

N26 GLAZING TO CONFORM WITH AS1288 AND AS2047. GLAZING FLASHINGSTO COMPLY WITH B.C.A. CL 3.5.3.6 AND AS 2904.

N27 STORM WATER DRAINS TO BE TAKEN TO THE LEGAL POINT OFDISCHARGE AS DIRECTED BY THE LOCAL COUNCIL AND AND PLANS.

N28 EXCAVATION OF TRENCHES FOR SEWERAGE, DRAINAGE ETC, TO BECARRIED OUT IN ACCORDANCE WITH CONTROLLING AUTHORITIESREQUIREMENTS.

SHEET LIST

FOREWORD

SOLE PROPRIETOR: MR AND MRS M METCALF OF 24 FINCH STREETBEECHWORTH VIC 3747.LOCAL GOVERNING COUNCIL: INDIGOE SHIRE COUNCILARCHITECT: HALEN T MOKA

FOR ANY FURTHER INFORMATION CONTACT HALEN T MOKA HERE:

PH: 0410 522 743 OR [email protected]

THIS DOCUMENT HAS BEEN PROVIDED BY HALEN MOKA OF FORTITUDE - DESIGN AND BUILD, ON BEHALF OF MR AND MRS MMETCALF, IN CONJUNCTION WITH ENGINEERS SPECIFICATIONS AND DRAWINGS AT THE REQUEST OF THE BUILDING PERMITAPPLICATION PROCEDURES OF THE INDIGOE SHIRE COUNCIL. THIS DOCUMENT MUST BE ASSESSED AND CONSIDERED AS ACOMPONENT IN A SERIES OF REQUESTED DOCUMENTS FOR THE APPLICATION OF A BUILDING PERMIT FOR THE RESIDENTIALDEVELOPMENT AT 24 FINCH STREET BEECHWORTH, VIC, 3747.

FORTITUDE TAKES NO RESPONSIBILITY FOR ANY DAMAGES TO ANY INDIVIDUALS HEALTH OF FINANCIAL DAMAGES THAT MAYOCCUR TO ANY THIRD PARTY ASSOCIATIONS WHEN USING THESE CONSTRUCTION DRAWINGS AS A GUIDE IN ANY PROJECT.

MR AND MRS M METCALF

24 FINCH STREET BEECHWORTH 3747

DEMOLITION OF EXISTING DWELLING ANDCONSTRUCTION OF PROPOSED SINGLESTORY DWELLING WITH ATTATCHEDGARAGE.

CLIENT:

ADDRESS:

PROJECT:

Scale Checked by

Drawn by

Date Project number

1 : 100

Schedules

P1.0

FINCH STREET NEW DWELLING

MR A AND MRS M METCALF Issue Date

Author

HALEN MOKA

24 FINCH STREET, BEECHWORTH VIC W01

Door Schedule

Level Mark Location Height Width Thickness FinishFrame

Material Comments

Ground Floor 1 MASTER 2134 915 51 NATURALWHITE

CEDAR SWINGING

Ground Floor 2 BATHROOM 2134 813 51 NATURALWHITE

CEDAR SWINGING

Ground Floor 3 LAUNDRY 2134 915 51 NATURALWHITE

CEDAR SWINGING

Ground Floor 4 BED 1 2134 915 51 NATURALWHITE

CEDAR SWINGING


CEDAR SWINGING


CEDAR DOUBLE SWINGING


CEDAR DOUBLE SWINGING

Ground Floor 8 GARAGE 2134 813 51 NATURALWHITE

TURPENTINE SWINGING W/NON-COMBUSTIBLEWEATHER STRIP

Ground Floor 9 STORAGE 2032 762 51 NATURALWHITE

CEDAR SWINGING

Ground Floor 10 STUDY 2134 915 51 NATURALWHITE

CEDAR SWINGING

Ground Floor 11 LAUNDRY 2134 915 51 NATURALWHITE

CEDAR SWINGING

Ground Floor 12 MASTER 2438 3658 250 DOUBLEBASS

TURPENTINE DOUBLE SLIDING

Ground Floor 13 BED 1 2432 1730 120 DOUBLEBASS

TURPENTINE SINGLE SLIDING

Ground Floor 14 FRONT DOOR 2040 820 51 DOUBLEBASS

TURPENTINE SWINGING W/NON-COMBUSTIBLEWEATHER STRIP

Ground Floor 15 BED 2 2432 1730 120 DOUBLEBASS

TURPENTINE SINGLE SLIDING W/NON-COMBUSTIBLEWEATHER STRIP

Ground Floor 16 LAUNDRY 2432 1730 120 DOUBLEBASS

TURPENTINE SINGLE SLIDING W/NON-COMBUSTIBLEWEATHER STRIP

Ground Floor 17 LIVING 2438 3658 250 DOUBLEBASS

TURPENTINE DOUBLE SLIDING NON-COMBUSTIBLEWEATHER STRIP

Ground Floor 18 HALL 2438 6658 300 DOUBLEBASS

TURPENTINE 4 PANEL SLIDING NON-COMBUSTIBLEWEATHER STRIP

Ground Floor 19 DINING 2550 3900 80 DOUBLEBASS

TURPENTINE DOUBLE SLIDING NON-COMBUSTIBLEWEATHER STRIP

Ground Floor 20 HALL 2982 1430 50 DOUBLEBASS

TURPENTINE GLASS SWINGING 9MM TOUGHENEDGLASS W/NON-COMBUSTIBLE WEATHERSTRIP

Ground Floor: 20Grand total: 20

Window ScheduleMark Location Window Style Width Height Material Glazing Remarks

1 PANTRY FIXED 406 1830 TURPENTINE SINGLE 9MM TOUGHENEDFROSTED GLASS

ARGON FILLED AND THERMALLYBROKEN

2 BATHROOM AWNING 915 1220 ALUMINIUM 9MM TOUGHEND GLASS DBLGLAZED


3 ENSUITE AWNING 3339 458 ALUMINIUM 9MM TOUGHEND GLASS DBLGLAZED


4 KITCHEN AWNING 610 1220 ALUMINIUM 9MM TOUGHEND GLASS DBLGLAZED


5 STUDY AWNING 610 1830 ALUMINIUM 9MM TOUGHEND GLASS DBLGLAZED


6 STUDY AWNING 610 1830 ALUMINIUM 9MM TOUGHEND GLASS DBLGLAZED


7 BED 2 AWNING 1400 1200 ALUMINIUM 9MM TOUGHEND GLASS DBLGLAZED






Sheet ListSheet Number Sheet Name

W01 SchedulesW02 Site PlanW03 Landscaping PlanW04 Site Drainage PlanW05 Roof PlanW06 East/West ElevationsW07 North/ South ElevationsW08 SectionsW09 Sections IIW10 Electrical PlanW11 Reflected Ceiling PlanW12 Floor PlanW13 Slab PlanW14 Internal ElevationsW15 Internal Elevations IIW16 DetailsW17 Details II

PRODUCED BY AN AUTODESK STUDENT PRODUCTP

RO

DU

CE

D B

Y A

N A

UTO

DE

SK

STU

DE

NT P

RO

DU

CT


RO

DU

CE

D B

Y A

N A

UTO

DE

SK

STU

DE

NT

PR

OD

UC

T

1000

1940

1195

13170

50180

14800

3500

NORTH

517000

517500

518000

519000

PROPOSED CONCRETEDRIVEWAY MACHINED FINISHIN-GROUND

POOL

EXISTING UNSEALEDDRIVEWAY

CONCRETE FOOTPATH

EXISTING CONCRETECROSSOVER

PROPOSED CONCRETECROSSOVER

CONC

RETE F

OOTPATHCONC

RETE F

OOTPATH

DECKING

PP

48°00'00''

48°00'00''

42°00'00''

42°00'00''

EXISTING SINGLE STORY DWELLINGTO BE COMPLETELY DEMOLISHED

EXISTING F

ENCING

TOBE REM

OVED

WM

2426

GATE

TWO STOREY DWELLINGLIGHT WEIGHT CONSTRUCTIONW/ HIGH PITCHED GABLE ROOF.

ATTATCHED MULTIPLEGABLE ROOF SINGLESTOREY EXTENSIONS

SW SWSWSWSW

SWSW

SW

SW

SW SW SW SW SW SW

1000

SW SW SW SW

SW SW

SWSW

S S S S S S S

S

S

S

S

S

W W W W W W W WW

S

STORMWATER PIPESTO CONNECT TO LPD

PROPOSED SINGLESTORY DWELLING

DECKING

POOL GATE TO OPENAWAY FROM POOL WITHSELF CLOSING SAFETY LATCH1500MM HIGH MIN.

HABITABLE WINDOWS1246

GATE

GRASS LAWN

ECO OUTDOOR DRYSTONE PAVERSINSTALLED TO MAUNFS SPECS

DP DP

DP

DPDPDP

DP

DP

DP

Site Notes

DEMOLITION NOTES: EXISTING SINGLE DWELLING AND EXISTING FENCING ON SITE TO BE DEMOLISHED IN ACCORDANCE WITH AS 2601 THEDEMOLITION OF STRUCTURES AND VICTORIAS CODE OF PRACTICE FOR DEMOLITION. TECHNIQUES FOR THE PREVENTION OF DUST, WATER-RUN OFF AND ANY MATERIALS FROM DAMAGING THE AMENITY OF THE SURROUNDING AREA MUST BE IMPLEMENTED. THE LARGE ELMTREE TO BE RETAINED MUST BE PROTECTED DURING DEMOLITION AND CONSTRUCTION.

SEWERAGE NOTIES: SEWERAGE PIPES ARE U-PVC DN150 WITH A 1:100 FALL IN ACCORDANCE WITH AS 3500.2 SANITARY PLUMBING ANDDRAINAGE SYSTEMS. A DN150 INSPECTION SHAFT MUST BE INSTALLED AS CLOSE TO THE SEWER CONNECTION AS POSSIBLE. CLEAR OFALL EASEMENTS AND IN THE OPEN AS TO BE ACCESSIBLE. tHEY MUST TERMINATE AT OR NEAR GROUND LEVEL WITH A REMOVABLEAIRTIGHT DN150 INSPECTION CAP.

STORM WATER NOTES: PIPES TO BE MADE OF U-PVC DN150 PIPE AT 1:100 FALL.. MUST BE A 300MM SEPERATION BETWEEN ANYUNDERGROUND WATER SERVICE PIPE, GAS PIPE AND/OR ELECTRICAL SUPPLY CABLES.

ELECTRICTY CABLES NOTES: MUST BE INDICATED ALONG ITS LENGTH WITH ORANGE MARKER TAPE 150MM ABOVE THE INSTALLEDPIPE. MUST BE BACKFILLED APPROPRIATELY COMPLYING WITH AS/NZS 2681.1, AS/NZS 3500.5 AND AS/NZS 3500.3.

THE PROPOSED CONSTRUCTION DOES NOT REQUIRE THE NEED FOR EARTH FILL AS THE CONCRETE SLAB STEPS UP THE SLOPE OF THELAND. A CUT WILL BE MADE NEAR THE SOUTHERN END OF THE PROPERTY AND 900MM TIMBER RETAINING WALL WILL BE CONSTRUCTEDAS SHOWN ON THE PLAN AND W15 RETAINING WALL DETAIL.

LEGEND

SEWERAGE

STORM WATERDOWNPIPE

POWER LINESPROPOSED UNDERGROUND POWER CABLEPOWERPOLE

PROPOSED UNDERGROUND WATER PIPEWATER MAIN

PROPOSED GATEPROPOSED 2M PRIVACY FENCEW/400MM PRIVACY LATTICE

EXISTING 2M METER FENCE

SITE CUT AREA

900MM RETAINING WALL

PP

WM

General Notes

SITE AREA: 650MBUILDING AREA: 307MBUILDING AREA PERCENTAGE: 47%WIND ZONE: N1SOIL CLASSIFICATION: MBAL RATING: BAL 12.5

EXISTING BUILDING TOBE DEMOLISHED

TREES TO BE REMOVED

TREE TO BE KEPT

CONTOUR LINES

W

PP

SW

S

DP

Scale Checked by

Drawn by

Date Project number

1 : 100

Site Plan

P1.0



Author

HALEN MOKA



RO

DU

CE

D B

Y A

N A

UTO

DE

SK

STU

DE

NT P

RO

DU

CT


RO

DU

CE

D B

Y A

N A

UTO

DE

SK

STU

DE

NT

PR

OD

UC

T

NORTH

517000

517500

518000

519000

PROPOSED CONCRETEDRIVEWAY MACHINED FINISH

IN-GROUNDPOOL

PORCH

EX

ISTIN

G FE

NC

ING

TOB

E R

EM

OV

ED

RETAINING

WALL

Scale Checked by

Drawn by

Date Project number

1 : 100

Landscaping Plan

P1.0



Author

Checker


SITE AREA: 650MBUILDING AREA: 307MBUILDING AREA PERCENTAGE: 47%WIND ZONE: N1SOIL CLASSIFICATION: M

TREE TO BE PLANTED

SMALL GRASS PLANT

TREES TO BE REMOVED

ELM TREE TO BE KEPT AND PROTECTED

site notes

LARGE ELM TREE IN THE CENTRE OF THE PROPERTY TO BE KEPT AND PROTECTED DURINGCONSTRUCTION IN ACCORDANCE WITH AS 4970 PROTECTION OF TREES ON DEVELOPMENTS.TREE PROTECTION ZONE TO BE 4200MM. LARGE ELM TREES ALONG THE NATURE STRIP ARE TOBE PROTECTED AND FENCED TO ENSURE NO DAMAGE OCCURS.

ALL GARDEN BEDS TO BE COVERED EVENLY IN TOPSOIL AND DARK RED CORSE BARK.

TREES TO BE REMOVED HAVE BEEN DEEMED UNSAFE TO OCCUPANTS AND NEIGHBORS BYA CERTIFIED ARBORIST AND THUS MUST BE REMOVED APPROPRIATELY. TREES MUST BEREMOVED BEFORE DEMOLITION WORKS BEGIN.

PAVERS ARE TO BE TRAVERTINE CAPRI PAVERS FROM ECO-OUTDOOR. PAVERS ARE TO BESEMI-SUBMERGED BELOW THE EARTH ON A 50MM BED OF SAND AS TO PREVENT MOVEMENTAND ENSURE A SECURE POSITION.

general notes

legend

DILLWYNIA CINERASCENS GREY PARROT-PEA

GREVILLEA APLINACATS CLAW GREVILLEA

ACACIA ACINACEA

GOLD DUST WATTLE

JOYCEA PALLIIDA SILVERTOP WALLABY-GRASS

XANTHORRHOEA PREISSII WESTERN AUSTRALIAN GRASSTREE

vegetation name type no.

TREE TO BE PLANTED

SHRUB 20CM TO 1M 40

MEDIUM SHRUB 1M TO 5M 20

LARGE GRASS LIKE PLANT 6>1M

MEDIUM GRASS TREE .UP TO 5M 2


RO

DU

CE

D B

Y A

N A

UTO

DE

SK

STU

DE

NT P

RO

DU

CT


RO

DU

CE

D B

Y A

N A

UTO

DE

SK

STU

DE

NT

PR

OD

UC

T

NORTH

517000

517500

518000

519000

PROPOSED CONCRETEDRIVEWAY MACHINED FINISH

IN-GROUND

POOL

PORCH

EXISTING F

ENCING

TOBE REM

OVED

SITE NOTES

IMPERMEABLE AREA: 267MSITE AREA: 650MPERMEABLE AREA PERCENTAGE: 38%SOIL CLASSIFICATION: M

general NOTES

ALL SOIL MUST SLOPE AWAY FROM BUILDING FOR A MINIMUM OF 1M.

AGGREGATION PIPE TO BE VINIDEX 100MM X 20M SLOTTED DRAINCOIL ANDINSTALLED BELOW AND BEHIND THE RETAINING WALL ABOVE GEO FABRIC ANDCOVERED IN CORSE GRANULAR FILL. GEO FABRIC MUST BE USED TOSEPERATE THE GRANULAR FILL AND SOIL BEHIND THE RETAINING WALL.

A 0.2 POLYETHYLENE VAPOUR BARRIER MUST BE USED TO DIRECT WATERBUILDUP TO THE AGGREGATION PIPE AND PREVENT WATER FROMTRANSFERRING THROUGH THE WALL SEE RETAINING WALL DETAIL ON W15.

ANY PLUMBING WORKS CARRIED OUT THAT DOES NOT COMPLY WITH THERELEVANT PLUMBING REGULATIONS AND CONTRACT DOCUMENTS WILL BECONSIDERED DEFECTIVE.

CONSTRUCTION TOLERANCES INCLUDE 19MM FOR LEVEL GUTTERS AND 13MMFOR SLOPING GUTTERS. THIS MUST BE ADHEARED TO. GUTTERS SHALL NOTRETAIN MORE THAN 10MM OF WATER. LEAKS ARE CONSIDERED A DEFECT. PVCPIPES SHALL HAVE A MEAN OUTSIDE DIAMETER OF 110 AND 100.4MM, A MEANINTERNAL DIAMETER OF 98MM AND A MAXIMM OUT OF SQUARENESS OF 4MM.

RETAINING

WALL

SW SW SW SW

SWSW

SW SW SWSW SW SW SW SW SW SW SW

SWSW

SW

SWSW

DP

DP

DP

DP

DP DP DP

DP

DP

ROOF PITCH7 DEGREES

ROOF PITCH35 DEGREES


ROOF PITCH7 DEGREES

RAIN GARDEN COLLECTS WATER RUNOFF FROM DRIVEWAY

WATER RUNOFF TO DRAIN NATURALLY THROUGHGRASS LAWN AND SURROUNDING RAIN GARDENS

RAIN GARDEN COLLECTS EXCESS WATER RUNOFF FROM GRASS LAWN

RAIN GARDEN COLLECTS EXCESS WATER RUNOFF AND DRAINS INVINIDEX 100MM X 20M SLOTTED DRAINCOIL TO STORM WATER PIPES

LAND SLOPES AWAY FROM HOUSE FOR 1 A MINIMUM OF 1M. WATER RUNOFF DRAINSTO VINIDEX 100MM X 20M SLOTTED DRAINCOIL UNDERNEATH RETAINING WALL

STORM WATER SYSTEM SPECIFICATIONS:DOWNPIPES TO BE DN 100 TYPE C U-PVC DOWNPIPE LOW GLOSS FINISH W/200mm X 200mm METAL RAINWATER HEAD FIXED TO CLADDING USINGMANUFACTURERS SPEC.

GUTTERS TO BE 90MM COLOURBOND LYSAGHT QUAD GUTTER PAINTED'MONUMENT' COLOUR. FIXED TO MANUFACTURERES SPECS.

STORM WATER PIPES TO BE MADE OF U-PVC DN150 PIPE AT 1:100 FALL..MUST BE A 300MM SEPERATION BETWEEN ANY UNDERGROUND WATERSERVICE PIPE, GAS PIPE AND/OR ELECTRICAL SUPPLY CABLES.STORM WATER PIPES TO FLOW DOWN HILL AND CONNECT TO LEGAL POINTOF DISCHARGE AT THE FRONT OF THE PROPERTY.

LEGEND

STORM WATER PIPE

AGGREGATION PIPE

FALL DIRECTION INDICATOR

CONTOUR LINES

UNDERGROUND PIPES LOCATED EXTERNALLY FROM THE BUILDING SHALL BE INA 2M DEEP TRENCH BY 0.3M WIDE. THE PIPES SHALL BE LAID ON A BED OFMINIMUM 75MM OF CRUSHED ROCK OR GRAVEL UP TO A MAXIMUM SIZE OF14MM.

THERE MUST BE A MINIMUM OF 100MM BETWEEN THE PIPE AND THE SIDES OFTHE TRENCH.

SCREENED CRUSHED ROCK SIZES 3MM TO 20MM TO BE USED AS THEGRANULAR FILL FILTER MATERIAL FOR AGGREGATION PIPES.

PIPES MUST DISCHARGE TO TO THE LEGAL POINT OF DISCHARGE. THELOCATION OF THE LEGAL POINT OF DISCHARGE WILL BE DETERMINED BY THEAUTHORITY HAVING JURISDICTION. THE CONNECTION WILL BE LOCATED OUTSIDETHE PROPERTY AND CONNECT TO AN ELEMENT OF THE EXTERNAL STORMWATER DRAINAGE NETWORK AND MAINS PIPES.

Scale Checked by

Drawn by

Date Project number

1 : 100

Site Drainage Plan

P1.0



Author

HALEN MOKA



RO

DU

CE

D B

Y A

N A

UTO

DE

SK

STU

DE

NT P

RO

DU

CT


RO

DU

CE

D B

Y A

N A

UTO

DE

SK

STU

DE

NT

PR

OD

UC

T

DECKING

DN 100 TYPE C U-PVCDOWNPIPE LOW GLOSS FINISH200mm X 200mm METAL RAINWATER HEAD

RWH

200X200 METAL RAIN WATERHEAD COLORBOND LOW GLOSSFINISH MONUMENT COLOUR

RWH

DP

DPDP

DP

INDICTIVE POSITION OF 2500L RHEEMPREMIER® HILINE SOLAR HOT WATERHEATER GAS BOOSTED.MODEL: 52H180K/1S-GINSTALLED TO MANUFACTURERESSPECIFICATIONS

INDICTIVE POSITION OF PREMIUM LINEGERMAN SOLAR, SOLAR PANELSINSTALLED TO MANUFACTURERESSPECIFICATIONS

90MM METAL COLOURBOND LYSAGHTQUAD GUTTER 'MONUMENT'FIXED TO MANUFACTURERES SPECS3 DEGREE FALL



EXHAUST FAN INSTALLED TOMANUFACTUERES SPECIFICATIONSSEALED WITH A NON-COMBUSTIBLESEALANT.

620X150 VELUX OPENABLE ROOF WINDOWSINSTALLED TO MANUFACTURERES SPECIFICATIONS

620X150 VELUX OPENABLE ROOF WINDOWS

POOL

RANGEHOOD EXHAUST FAN INSTALLED TOMANUFACTUREERS SPECIFICATIONS

150X150 STEEL COLOURBOND RIDGECAPPING 'MONUMENT' COLOUR.0.42 BMT WITH A RECESSED CUT TOMATCH COLOURBOND TRIMDEKPROFILE.

FLOW DIRECTION INDICATOR

DP

6MM ALUCOBOND SHEETING WITH A 5MMDEEP BY 10MM WIDE ROUTE LINEAT 900 CENTRES. LOW GLOSSSOLID ANTHRAZIT GREY- 105 COLOUR SEALEDWITH BLACK WATERPROOF EXTERIORSEALANT. ALUCOBOND MUST BE 70% NON-COMBUSTIBLE OR MORE AND COMPLY WITHAS 1530.3. GROUP 1 RATING WHEN TESTED TOISO 9705.

ROOF PITCH7 DEGREES

ROOF PITCH7 DEGREES

ULTRA RANGE TRIMDEK COLORBONDSHEETING MONUMENT COLOUR3 DEGREE FALL

6MM ALUCOBOND SHEETING WITH A 5MMDEEP BY 10MM WIDE ROUTE LINEAT 900 CENTRES. LOW GLOSSSOLID ANTHRAZIT GREY- 105 COLOURALUCOBOND MUST BE 70% NON-COMBUSTIBLE OR MORE AND COMPLY WITHAS 1530.3. GROUP 1 RATING WHEN TESTED TOISO 9705.

620X150 VELUX OPENABLEROOF WINDOWS INSTALLED TOMANUFACTURERES SPECIFICATIONSGLAZING AND SEALANTS AND FLASHINGSTO COMPLY WITH AS 3959.

FASCIA COLOURBOND STRAMIT METALMONMUMENT COLOUR



HOT WATER SYSTEM NOTES: HWS TO BE RHEEM PREMIER® HILINE SOLAR HOT WATER HEATER GAS BOOSTED.MODEL: 52H180K/1S-G SOLAR COLLECTORS: S200 X2BOOSTER TYPE GAS: REMOTE GAS 27L/MIN

HOT WATER HEATER MUST BE INSTALLED IN ACCORDANCE WITH AS3500.4 HEATED WATER SERVICE AND AS3500.5DOMESTIC INSTALLATIONS.SOLAR PANELS TO BE FIXED ON TOP OF ROOF AND COLLECTORS SHOULD BE INCLINED AT A SIMILAR ANGLE TOTHE LATITUDE ANGLE AND SHOULD BE LOCATED AS TO BE CLEAR OF SHADE FOR 3 HOURS EITHER SIDE OFSOLAR NOON. THE DEVIATION FROM THIS ANGLE SHOULD BE NOT GREATER THAN ±20° AS PER MANUFACTURERSSPECIFICATIONS AND AS 3500.4 HEATED WATER SERVICES.THE HOT WATER SYSTEM IS TO BE INSTALLED ABOVE THE STUDY ON THE ROOF. IT MUST BE EASILY ACCESSIBLETO RELIEF VALVES AND BE EASILY REMOVABLE WITHOUT MAJOR STRUCTURAL ALTERATIONS TO THE BUILDINGOR PIPEWORK.HOT WATER SYSTEM MUST BE CONNECTED TO THE 10 HOT WATER OUTLETS THROUGHOUT THE BUILDING.CONSIDERATION SHALL BE GIVEN TO THE ROUTE TAKEN BY VENT PIPES, DRAIN LINES OR SAFE WASTES.

General Notes

GUTTER FLOW DIRECTION

GUTTER FLOW DIRECTION CHANGE

DOWNPIPE

EXHAUST FAN

RAINWATER HEAD

SKYLIGHT

LEGEND

DP

RWH

DP

FLASHINGS TO BE INSTALLED TO MANUFACTURERESSPECIFICATIONS.

DOWNPIPES MUST NOT HAVE MORE THAN 50 SQUAREMETERS OF ROOFING SURFACE ALLOCATED TO ANYSINGLE DOWNPIPE.

DOWNPIPES ARE 100 MM DIA METAL PIPE. REF: BCA3.5.2.5 FOR INSTALLATION.

DRAINAGE OF STORMWATER MUST BE DRAINEDCORRECTLY AND IN ACCORDANCE WITH AS3500.4

3 SOLAR PANELS TO BE INSTALLED ON THE EASTERNMOST POINT OF THE ROOF. REFER TOMAUFACTURERES SPECIFICATIONS FOR INSTALLATION.

ANY VENTS AND ALL MECHANICAL VENILATION TO BESEALED AND MUST COMPLY WITH AS1668.2

ROOF TO BE SARKED AND OVER LAPPED 200MMWHERE NEW SHEETS JOIN HORIZONTALLY. SARKINGMUST DRAIN INTO GUTTER.

RAINWATER HEAD INSTALLED TO MANUFACTURERESSPECS.

COLOURBOND ROOFING SPECIFICATIONS:MATERIAL: COLORBOND® STEEL CONFORMING TO AS1397-G550-AM100 AND AS 2728.COLOUR: MONUMENT®THICKNESS: 0.42 BMTFIXING METHOD: FASTENERS SHOULD BE SELECTED TOMATCH THE GRADE OF THE ROOFING MATERIAL.SIZE: AS PER ROOF SIZE.SPACING: 1200MMPROFILE: TRIMDEKROOF CONTRACTOR: THE ROOF SHEETING, WALLINGAND ACCESSORIES SHALL BE INSTALLED INACCORDANCE WITH MANUFACTURER SPECIFICATIONS.

VELUX ROOF WINDOWS SPECIFICATIONS:VELUX ROOF WINDOWS AND MATERIALS THAT ITCONSISTS OF TO MEET THE REQUIREMENTS OF AS4285SKYLIGHTS, AS1288 OVERHEAD GLAZING AND AS3959BUSHFIRE FOR BAL 40 REQUIREMENTS AND AS1530.1NON-COMBUSTIBILITY.. MUST BE INSTALLED TOMANUFACTURERES SPECIFICATIONS AND SEALEDAPPROPRIATELY TO ENSURE THERE IS NO WATERINGRESS.

ALUCOBOND® PLUS SPECIFICATIONS:ALUCOBOND® PLUS ALUMINIUM COMPOSITE MATERIAL(ACM) SHALL BE 6MM THICK AND CONSIST OF 2LAYERS OF 0.5MM THICK ALUMINIUM SANDWICHING AMINERAL FILLED FIRE RESISTANT CORE CONTAINING 70%NON COMBUSTIBLE MINERAL FILLING.THE ALUMINIUM SKINS SHALL BE OF ALLOY ALMG 1- NS41(EN AW 5005A NEAREST EQUIVALENT) HAVING ANULTIMATE STRENGTH OF 130 MPA AND 0.2% PROOFSTRESS OF 90 MPA. ALUCOBOND SHEETING MUST BEFIXED WITH B20620 IMPULSE C15 BFP STRAIGHTBRADERS EVERY 100MM AROUND THE EDGES TOTIMBER BATTENS AND STUDS. BE SURE TO FIX EXTRATIMBER PEICES AROUND ALUCOBOND EDGES WHERETHERE ARE GAPS AND NO TIMBER TO FIX TO.MUST COMPLY WITH THE REQUIREMENTS OF BAL 12.5 INAS 3959 .

PITCH CHANGE FLASHINGSTEEL FLASHING MUST BE USED WHERE ROOF PITCHESCHANGE AND MUST EXTEND UNDERNEATH THE UPPERROOF WITH A 20MM RETURN FOLD, AND THEN OVERTHE TOP OF THE LOWER ROOF WITH A BREAK TO SUITTHE ROOFING PROFILE (CORRUGATED IRON). TO MINIMISETHE PROBLEM OF WIND DRIVING WATER UP-HILL THETOP ENDS OF THE LOWER ROOF SHOULD BE TURNEDUP.THE END OF THE FLASHING THAT SITS ABOVE THELOWER ROOF AND OVERLAPS BY 150MM, MUST HAVE ANOTCHED BREAK TO ALLOW THE ROOF PROFILE TOBE FITTED INTO THE FLASHING TO GIVE GREATERPROTECTION FROM WATER BLOWING BACK UNDER THEFLASHING. SEE W16 ROOF PITCH CHANGE

LONGITUDINAL FLASHINGS SHALL 0.42BMT STEELAND BE FASTENED AT MAXIMUM 500MM CENTRES.

LONGITUDINAL FLASHINGS SHALL 0.42BMTSTEEL AND BE FASTENED AT MAXIMUM500MM CENTRES

LONGITUDINAL 0.42BMT STEEL FLASHINGS MUST BEFASTENED AT MAXIMUM 500MM CENTRES.

6MM ALUCOBOND SHEETING WITH A 5MM DEEP BY 10MM WIDE ROUTE LINEAT 900 CENTRES. LOW GLOSSSOLID ANTHRAZIT GREY- 105 COLOURALUCOBOND MUST BE 70% NON-COMBUSTIBLE OR MORE AND COMPLY WITH AS 1530.3.GROUP 1 RATING WHEN TESTED TO ISO 9705.



Scale Checked by

Drawn by

Date Project number

1 : 100

Roof Plan

P1.0



Author

HALEN MOKA



RO

DU

CE

D B

Y A

N A

UTO

DE

SK

STU

DE

NT P

RO

DU

CT


RO

DU

CE

D B

Y A

N A

UTO

DE

SK

STU

DE

NT

PR

OD

UC

T

350 73

8

1691

1

W09

3421

121315 16 2

3

45 67

8 9

ECO OUT DOOR DRYSTONE WALL"ALPINE"INSTALLED TO MANUFACTURERES SPECS

100X25 TURPENTINEDECKINGINTERGRAIN REDWOOD'NATURAL' STAIN FIXEDWITH 50MMGAL SELF DRILLINGSCREWS

100X25 TURPENTINECLADDINGINTERGRAIN REDWOOD'NATURAL' STAIN FIXEDWITH 50MMGAL CLOUTS

ALUCOBOND SPARKLING BLACKMETALLIC 888 SEALED WITH BLACK SILICONEFIXED WITH B20620 IMPULSE C15BFP STRAIGHT BRADERS

ALUCOBONDSPARKLINGBLACKMETALLIC 888SEALED WITHBLACKSILICONEFIXED WITHB20620IMPULSE C15BFP STRAIGHTBRADERS

DN 100 TYPE C METAL DOWNPIPE 'MONUMENT'LOW GLOSS FINISH220mm X 140mmMETAL RAINWATER HEAD FIXED TO CLADDINGUSING MANUFACTURERS SPECS

DN 100 TYPE C METALDOWNPIPE 'MONUMENT'LOW GLOSS FINISH220mm X 140mmMETAL RAINWATER HEADFIXED TO CLADDING USINGMANUFACTURERS SPECS

INDICTIVE POSITION OF PREMIUM LINE GERMANSOLAR, SOLAR PANELSINSTALLED TO MANUFACTURERESSPECIFICATIONS

100X25 TURPENTINE DECKINGINTERGRAIN REDWOOD'NATURAL' STAIN FIXED WITH 50MMGAL SELF DRILLING SCREWS.

COLOURBOND CORRGATEDROOFING IRONINSTALLED TO MANUFCTURERES SPECS'MONUMENT'

ECO OUT DOOR DRYSTONE PAVERS"ALPINE"INSTALLED TO MANUFACTURERES SPECS

COLOURBON IRON RIDGE CAPPINGFIXED TO MANUYFACTURERES SPECIFICATIONS'MONUMENT'

RETAININGWALL SEEDETAIL

HIGHGROVE 9MM TOUGHENED SAFETYGLASS 1200X1300X12 PANELSTAINLESS STEEL FIXING TOMANUFACTURERES SPECIFICATIONS

INDICTIVE POSITION OFPHOTOVOLTAICS FOR SOLARHOT WATER SYSTEMINSTALLED TOMANUFACTURERESSPECIFICATIONS

90MM METAL COLOURBOND LYSAGHTQUAD GUTTER 'MONUMENT'FIXED TO MANUFACTURERES SPECS

INDICTIVE POSITION OF 2500L RHEEM PREMIER® HILINESOLAR HOT WATER HEATER GAS BOOSTED.MODEL: 52H180K/1S-GINSTALLED TO MANUFACTURERES SPECIFICATIONS

SKYDOME LOW E DOUBLE GLAZEDBLACK ALUMINIUM FRAME INSTALLEDTO MANUFACTURERES SPECS

180 STEPDOWN ONDECKING.

5960

NATURALGROUND LEVEL

1788

1050 60

0

688

1

W09




100X25 TURPENTINE CLADDINGINTERGRAIN REDWOOD STAINFIXED WITH B20620 IMPULSE C15BFP STRAIGHT BRADERS

ECO OUT DOOR DRYSTONE WALL"ALPINE"INSTALLED TO MANUFACTURERES SPECS

DN 100 TYPE C METAL DOWNPIPE'MONUMENT' LOW GLOSS FINISH220mm X 140mmMETAL RAINWATER HEAD FIXED TOCLADDING USING MANUFACTURERSSPECS

DN 100 TYPE C METAL DOWNPIPE'MONUMENT'LOW GLOSS FINISH220mm X 140mmMETAL RAINWATER HEAD FIXED TOCLADDING USING MANUFACTURERS SPECS

DN 100 TYPE C METALDOWNPIPE 'MONUMENT' LOWGLOSS FINISH220mm X 140mmMETAL RAINWATER HEADFIXED TO CLADDING USINGMANUFACTURERS SPECS

ALUCOBOND SPARKLINGBLACKMETALLIC 888 SEALEDWITH BLACK SILICONEFIXED WITH B20620IMPULSE C15BFP STRAIGHT BRADERS


17 18 2090MM COLOURBOND LYSAGHTQUAD GUTTER 'MONUMENT'FIXED TO MANUFACTURERES SPECS

90MM COLOURBOND LYSAGHTQUAD GUTTER 'MONUMENT'FIXED TO MANUFACTURERES SPECS

STAINLESSSTEEL POOL LADDERINSTALLED TO MANUFACTURERESSPECIFICATIONS

ECO OUT DOORDRYSTONEWALL"ALPINE"INSTALLED TOMANUFACTURERESSPECS


100X25 TURPENTINEDECKINGINTERGRAIN REDWOOD'NATURAL' STAIN FIXEDWITH 50MMGAL SELF DRILLINGSCREWS

100X25 TURPENTINE CLADDINGINTERGRAIN REDWOOD'NATURAL' STAIN FIXED WITH 50MMGAL CLOUTS

COLOURBOND CORRGATEDROOFING IRONINSTALLED TO MANUFCTURERESSPECS 'MONUMENT'

SKYLIGHTS TO BE INSTALLED TO MANUFACTURERES SPECIFICIATIONSAND SEALED TO PREVANT WATER INGRES

ALL STORMWATER GUTTERS, PIPES AND SERVICES TO BE CONSTRUCTED INACCORDANCE WITH ASNZS 3500.3 PASRT 3 STORMWATER DRAINAGE.FEATURE WALL AND STONE WALL AT THE FRONT OF THE PROPERTY ANDATTATCHED CUSTOM MAILBOX TO BE CONSTRUCTED OF ECO-OUTDOORDRYSTONE 'ALPINE' WALL PANELS GLUED ON TOP OF 6MM FIBRE CEMENTSHEETING APPROPRIATELY FIXED TO A TIMBER WALL FRAMED WALL USING30MM GAL CLOUTS. THE LOCATION OF THIS WALL AND ASSOCIATED CURVEWILL BE INDICTIVE AND FOLLOW THE EDGE AND LENGTH OF THE DRIVEWAY ANDTHE FRONT OF THE PROPERTY EDGE UNTILL OT REACHES THE MAILBOX ANDFENCE AND THEN CONTINUE UNTILL IT REACHES THE EASTERN FENCE. HEIGHTOF THE FENCE TO STAY LEVEL ALONG ITS LENGTH.

RETAININGWALL SEEDETAIL

HIGHGROVE 9MM TOUGHENED SAFETYGLASS 1200X1300X12 PANELSTAINLESS STEEL FIXING TOMANUFACTURERES SPECIFICATIONS.SEE BALUSTRADE DETAIL ON W16

INDICTIVELOCATION OFLANDSCAPINGBOULDERIN GARDEN BED

90MM COLOURBOND LYSAGHTQUAD GUTTER 'MONUMENT'FIXED TO MANUFACTURERES SPECS

General Notes SERVICES NOTES

METERBOX/SWITCHBOARD NOTES:TYPE: RS485 2 WIRE, HALF DUPLEX, ISOLATEDBAUD RATE: 600 TO 19200 BPSPROTOCOL: MODBUS RTUFUNCTION: RED/ WRITE SETPOINTS

READ ACTUAL VALUESEXECUTE COMMANDS

POWER SUPPLY:INPUT: 100V-240V AC 50/60HZ

100V-300VDCPOWER: 2W

NOTE: BEFORE ANY WORKS BEGIN ON ANY ELECTRICAL CONNECTIONS ONSITE IT IS ADVISED THAT THE RELEVANT AUTHORITYSPI NETWORKS BE CONTACTED.

METERBOX/SWTICHBOARD INSTALLATION REQUIREMENTS:THERE MUST BE A SEPARATION OF 300MM BETWEEN ANY UNDERGROUNDWATER SERVICE PIPE AND AN ELECTRICAL SUPPLY CABLE. ANY WATERSERVICE PIPE GREATER THAN DN 65 WILL BE INDICATED APPROPRIATELYALONG ITS LENGTH AT 150MM ABOVE THE PIPE AND MUST ALSO BEMECHANICALLY PROTECTED IN ACCORDANCE WITH ASNZS 3500.5, ASNZS2648 AND ASNZS 3000.

CONDUIT OF DN50 AND CABLES OF DN20 ARE TO BE CONNECTED TOSWITCHBOARD/METER BOX IN ACCORDANCE WITH ASNZS 3000.

CIRCTUIT BREAKER REQUIREMENTS:CIRCUIT BREAKERS FOR EACH REQUIRED CIRCUIT ARE TO BE MOUNTEDONTO A CLEARLY IDENTIFIABLE, SINGLE-PHASE SWITCHBOARD ANDCORRESPOND TO ACTIVE/NEUTRAL CONNECTIONS.

GAS INSTALLATION NOTES:PIPES USED FOR GAS SUPPLY SYSTEM: COPPER DN10 PIPES.

iNSTALLATION REQUIREMENTS:THERE MUST BE A SEPARATION OF 300MM BETWEEN ANY UNDERGROUNDWATER SERVICE PIPE AND CONSUMER GAS PIPES. ANY WATER SERVICE PIPEGREATER THAN DN 65 WILL BE INDICATED APPROPRIATELY ALONG ITSLENGTH WITH ORANGE MARKER TAPE AT 150MM ABOVE THE PIPE INACCORDANCE WITH ASNZS 2648.1 – UNDERGROUND MARKING TAPE AND ASNZS5601 – GAS INSTALLATIONS.

NOTE: BEFORE ANY WORKS BEGIN ON ANY GAS CONNECTIONS ON SITE IT ISADVISED THAT THE RELEVANT AUTHORITY SPI NETWORKS BE CONTACTED.

WALL MUST BE SARKED AND EXTERNALLY FIXED WITH 6MM CEMENTSHEETING USING 30MM GAL CLOUTS. 20X50 VERTICAL TIMBER BATTENS TO BEPLACED AT 600 CNTRS AND FIXED WITH 65MM GAL BATTEN SCREWS. A 12MMGAP AT THE TOP OF THE WALL AND A 200MM GAP AT THE BOTTOM OF THEWALL MUST BE LEFT TO ALLOW AIRFLOW BEHIND THE TIMBER CLADDING.50X50 HORIZONTAL BATTENS TO BE FIXED TO VERTICAL BATTENS AT 600CNTRS WITH 65MM BATTEN SCREWS. ENSURE A GAP OF 8MM BETWEENTIMBER CLADDING AND EDGE BATTEN. EXTRA PEICES OF BATTEN TO BEATTATCHED AT JOINTS TO FIX SHORTER PEICES OF CLADDING WHEREREQUIRED.50X2.8MM BRIGHT 'D' HEAD MACHINE DRIVEN NAILS TO BE USED TO FIX100X25MM TURPENTINE SHADOW CLADDING. IF NAILS ARE LESS THAN 30MMFROM THE END OF THE PEICE OF TIMBER, A PILOT HOLE MUST BE DRILLEDPRIOR TO FIXING.END GRAIN TO BE SEALED AND INTERGRAIN REDWOOD STAIN TO BE APPLIEDTO CLADDING AS PER MANUFACTURERES SPECS.

ALL DOORS TO BE INSTALLED TO MANUFACTURERES SPECSTIMBER CLADDING MUST NOT SIT ON TIMBER FRAMEWATER PROOFING TO OVERHANG OVER DOOR FRAME APPROPRIATELYTO ENSURE CORRECT WATER RUNOFF AND PREVENT MOISTURE BUILD-UP.REFER TO DOOR SCHEDULE FOR DOOR AND GLAZING SPECIFICATIONS.ALL OPENINGS ARE OF NOMINAL HEIGHT AND LENGTH AND MAY VARY.

ALL SOIL MUST SLOPE AWAY FROM BUILDING FOR A MINIMUM OF 1M.

ARTICULATE MASONRY VENEER WALLS MUST BE CONSTRUCTED INACCORDANCE WITH AS 3700 AND AS 1684.4.

FIRE RESISTANT TURPENTINE TIMBER TO COMPLY WITH AS3959 TIMBERIN BUSHFIRE PRONE AREAS. APPENDIX E

EXTERNAL CLADDING NOTES

E

G

6443

LETTER BOX

180MM STEP DOWNON DECKING.

Scale Checked by

Drawn by

Date Project number

1 : 100

East/West Elevations

P1.0



Author

HALEN MOKA



RO

DU

CE

D B

Y A

N A

UTO

DE

SK

STU

DE

NT P

RO

DU

CT


RO

DU

CE

D B

Y A

N A

UTO

DE

SK

STU

DE

NT

PR

OD

UC

T

1

W08

2

W08




90MM COLOURBONDLYSAGHTQUAD GUTTER'MONUMENT'FIXED TOMANUFACTURERESSPECS

COLOURBON IRON RIDGE CAPPINGFIXED TO MANUYFACTURERESSPECIFICATIONS'MONUMENT'

100X25TURPENTINECLADDINGINTERGRAINREDWOODSTAINFIXED WITHB20620IMPULSE C15BFP STRAIGHTBRADERS


90MM COLOURBOND LYSAGHTQUAD GUTTER 'MONUMENT'FIXED TO MANUFACTURERES SPECSDN 100 TYPE C METAL DOWNPIPE 'MONUMENT'LOW GLOSS FINISH220mm X 140mm METAL RAINWATER HEADFIXED TO CLADDING USING MANUFACTURERSSPECS

100X25 TURPENTINE DECKINGINTERGRAIN REDWOOD'NATURAL' STAIN FIXED WITH 50MMGAL SELF DRILLING DECKING SCREWS


HIGHGROVE 9MM TOUGHENED SAFETYGLASS 1200X1300X12 PANELSTAINLESS STEEL FIXING TOMANUFACTURERES SPECIFICATIONSSEE BALUSTRADE DETAIL ON W16

INDICTIVE POSITION OF PREMIUM LINEGERMAN SOLAR, SOLAR PANELSINSTALLED TO MANUFACTURERESSPECIFICATIONS

INDICTIVE POSITION OF PHOTOVOLTAICS FORSOLAR HOT WATER SYSTEMINSTALLED TO MANUFACTURERES SPECs



100X25 TURPENTINEDECKINGINTERGRAIN REDWOOD'NATURAL' STAIN FIXEDWITH 50MMGAL SELF DRILLINGSCREWS.

ECO OUT DOORDRYSTONE PAVERS"ALPINE"INSTALLED TOMANUFACTURERESSPECS

0201

03

04

05

06

14

SCHWEISS CUSTOM DESIGNED BI-FOLDMECHANICAL DOORS INSTALLED TOMANUFACTURERES SECS.WITH 100X25 TURPENTINE CLADDINGINTERGRAIN REDWOOD'NATURAL' STAIN FIXED WITH 50MMGAL CLOUTS

07

WALL MUST BE SARKED AND EXTERNALLYFIXED WITH 6MM CEMENT SHEETING USING 30MMGAL CLOUTS.20X50 VERTICAL TIMBER BATTENS TO BEPLACED AT 600 CNTRS AND FIXED WITH 65MMGAL BATTEN SCREWS.A 12MM GAP AT THE TOP OF THE WALL AND A200MM GAP AT THE BOTTOM OF THE WALLMUST BE LEFT TO ALLOW AIRFLOW BEHINDTHE TIMBER CLADDING.

50X50 HORIZONTAL BATTENS TO BE FIXED TOVERTICAL BATTENS AT 600 CNTRS WITH 65MMBATTEN SCREWS.ENSURE A GAP OF 8MM BETWEEN TIMBERCLADDING AND EDGE BATTEN.

ALL DOORS TO BE INSTALLED TOMANUFACTURERES SPECSTIMBER CLADDING MUST NOT SIT ON TIMBERFRAMEWATER PROOFING TO OVERHANG OVER DOORFRAME APPROPRIATELYTO ENSURE CORRECT WATER RUNOFF ANDPREVENT MOISTURE BUILD-UP.REFER TO DOOR SCHEDULE FOR DOOR ANDGLAZING SPECIFICATIONS.

ALL SOIL MUST SLOPE AWAY FROMBUILDING FOR A MINIMUM OF 1M.

ALL OPENINGS ARE OF NOMINAL HEIGHTAND LENGTH AND MAY VARY.

DOWNPIPES MUST BE INSTALLED INACCORDANCE WITH AS 3500.

ALL OPENINGS ARE OF NOMINAL HEIGHTAND LENGTH AND MAY VARY.

GAS METER AND METER BOX TO BEINSTALLED BY ELECTRICIAN CORRECTLY.REFER TO NOTES ON W05.

FEATURE WALL AND STONE WALL ATTHE FRONT OF THE PROPERTY ANDATTATCHED CUSTOM MAILBOX TO BECONSTRUCTED OF ECO-OUTDOORDRYSTONE 'ALPINE' WALL PANELSGLUED ON TOP OF 6MM FIBRE CEMENTSHEETING APPROPRIATELY FIXED TO ATIMBER WALL FRAMED WALL USING30MM GAL CLOUTS. THE LOCATION

EXTRA PEICES OF BATTEN TO BE ATTATCHEDAT JOINTS TO FIX SHORTER PEICES OF CLADDINGWHERE REQUIRED.50X2.8MM BRIGHT 'D' HEAD MACHINE DRIVENNAILS TO BE USED TO FIX 100X25MM TURPENTINESHADOW CLADDING.IF NAILS ARE LESS THAN 30MM FROM THE ENDOF THE PEICE OF TIMBER, A PILOT HOLE MUSTBE DRILLED PRIOR TO FIXING.

END GRAIN TO BE SEALED AND INTERGRAINREDWOOD STAIN TO BE APPLIED TO CLADDING ASPER MANUFACTURERES SPECS.

SCHWEISS CUSTOM DESIGNED MECHANICAL DOORS INSLALLED TO MANUFACTURERES SPECIFICATIONS WITH100X25 TURPENTINE CLADDING AND INTERGRAIN REDWOOD NATURAL STAIN. TO BE FIXED WITH 50MM GALCLOUTS. ELECTRONIC MECHANICAL ARMS AND HYDROLICS SPECIFIED AND INSTALLED BY MANUFACTURERE.

EXTERNAL CLADDING NOTES

MECHANICAL GARAGE DOOR

General Notes

INDICTIVE POSITION OF 2500LRHEEM PREMIER® HILINE SOLARHOT WATER HEATER GASBOOSTED.MODEL: 52H180K/1S-GINSTALLED TOMANUFACTURERESSPECIFICATIONS

ARTICULATE MASONRY VENEER WALLS MUST BE CONSTRUCTED IN ACCORDANCE WITH AS 3700 AND AS 1684.4.

OF THIS WALL AND ASSOCIATED CURVEWILL BE INDICTIVE AND FOLLOW THEEDGE AND LENGTH OF THE DRIVEWAYAND THE FRONT OF THE PROPERTYEDGE UNTILL OT REACHES THE MAILBOXAND FENCE AND THEN CONTINUE UNTILLIT REACHES THE EASTERN FENCE. HEIGHTOF THE FENCE TO STAY LEVEL ALONGITS LENGTH.

FEATURE WALL TO BECONSTRUCTED FROM ECOOUTDOOR DRYSTONEPANELSFOR CONSTRUCTIONDETAILS SEE GENERALNOTES.

20MPA CONCRETE DRIVEWAY

1

W08

2

W08

8 9

10



COLOURBOND CORRGATED ROOFING IRONINSTALLED TO MANUFCTURERES SPECS 'MONUMENT'

90MM COLOURBOND LYSAGHTQUAD GUTTER 'MONUMENT'FIXED TO MANUFACTURERES SPECSDN 100 TYPE C METAL DOWNPIPE 'MONUMENT'LOW GLOSS FINISH220mm X 140mm METAL RAINWATER HEADFIXED TO CLADDING USING MANUFACTURERS SPEC



ALUCOBOND SPARKLING BLACKMETALLIC 888 SEALED WITH BLACKSILICONEFIXED WITH B20620 IMPULSE C15BFP STRAIGHT BRADERS

90MM COLOURBOND LYSAGHTQUAD GUTTER 'MONUMENT'FIXED TO MANUFACTURERES SPECSDN 100 TYPE C METAL DOWNPIPE'MONUMENT'LOW GLOSS FINISH220mm X 140mm METAL RAINWATERHEADFIXED TO CLADDING USINGMANUFACTURERS SPECS

HIGHGROVE 9MM TOUGHENED SAFETYGLASS 1200X1300X12 PANELSTAINLESS STEEL FIXING TOMANUFACTURERES SPECIFICATIONSSEE BALUSTRADE DETAIL ON W16

INDICTIVE POSITION OF PREMIUM LINEGERMAN SOLAR, SOLAR PANELSINSTALLED TO MANUFACTURERES SPECIFICATIONS

INDICTIVE POSITION OF PHOTOVOLTAICS FOR SOLARHOT WATER SYSTEMINSTALLED TO MANUFACTURERES SPECIFICATIONS

INDICTIVE POSITION OF 2500L RHEEM PREMIER®HILINE SOLAR HOT WATER HEATER GASBOOSTED. MODEL: 52H180K/1S-GINSTALLED TO MANUFACTURERES SPECS


100X25 TURPENTINE DECKINGINTERGRAIN REDWOOD'NATURAL' STAIN FIXED WITH 50MMGAL SELF DRILLING SCREWS.

19 21

2838

2869

571

5567

FEATURE WALL TO BECONSTRUCTED FROM ECOOUTDOOR DRYSTONE PANELSFOR CONSTRUCTION DETAILSSEE GENERAL NOTES.

Scale Checked by

Drawn by

Date Project number

1 : 50

North/ SouthElevations

P1.0



Author

HALEN MOKA



RO

DU

CE

D B

Y A

N A

UTO

DE

SK

STU

DE

NT P

RO

DU

CT


RO

DU

CE

D B

Y A

N A

UTO

DE

SK

STU

DE

NT

PR

OD

UC

T

1

W09

ALL DOORS TO BE INSTALLED TO MANUFACTURERES SPECSTIMBER CLADDING MUST NOT SIT ON DOOR FRAME.WATER PROOFING TO OVERHANG OVER DOOR FRAME APPROPRIATELYTO ENSURE CORRECT WATER RUNOFF AND PREVENT MOISTURE BUILD-UP AND WATER INGRESS.REFER TO DOOR SCHEDULE FOR DOOR AND GLAZING SPECIFICATIONS.

ALL STRUCTURAL STEEL TO BE PROTECTED IN ACCORDANCE WITHAS2312.

ALL BRICKWORK TO BE CONSTRUCTED IN ACCORDANCE WITH AS4773MASONRY IN SMALL BUILDINGS.

FORMWORK FOR CONCRETE SLAB TO BE CONSTRUCTED INACCORDANCE WITH AS3610 FORMWORK FOR CONCRETE.

RETAINING WALL TO BE BUILT IN ACCORDANCE WITH AS4678 EARTHRETAINING STRUCTURES.

ALL STORMWATER GUTTERS, PIPES AND SERVICES TO BECONSTRUCTED IN ACCORDANCE WITH ASNZS 3500.3 PASRT 3STORMWATER DRAINAGE

ALL CONCRETE STRUCTURES TO BE CONSTRUCTED IN ACCORDANCEWITH AS 3600 CONCRETE STRUCTURES. CONCRETE SLAB TOCONSTRUCTED IN ACCORDANCE WITH AS2870 RESIDENTIAL SLABS ANDFOOTINGS.

TIMBER CLADDING SPECIFICATIONS:WALL MUST BE SARKED AND EXTERNALLY FIXED WITH 6MM CEMENTSHEETING USING 30MM GAL CLOUTS. 20X50 VERTICAL TIMBER BATTENSTO BE PLACED AT 600 CNTRS AND FIXED WITH 65MM GAL BATTENSCREWS. A 12MM GAP AT THE TOP OF THE WALL AND A 200MM GAP ATTHE BOTTOM OF THE WALL MUST BE LEFT TO ALLOW AIRFLOWBEHIND THE TIMBER CLADDING.50X50 HORIZONTAL BATTENS TO BE FIXED TO VERTICAL BATTENS AT600 CNTRS WITH 65MM BATTEN SCREWS. ENSURE A GAP OF 8MMBETWEEN TIMBER CLADDING AND EDGE BATTEN.EXTRA PEICES OF BATTEN TO BE ATTATCHED AT JOINTS TO FIXSHORTER PEICES OF CLADDING WHERE REQUIRED.50X2.8MM BRIGHT 'D' HEAD MACHINE DRIVEN NAILS TO BE USED TO FIX100X25MM TURPENTINE SHADOW CLADDING. IF NAILS ARE LESS THAN30MM FROM THE END OF THE PEICE OF TIMBER, A PILOT HOLE MUSTBE DRILLED PRIOR TO FIXING.END GRAIN TO BE SEALED AND INTERGRAIN REDWOOD STAIN TO BEAPPLIED TO CLADDING AS PER MANUFACTURERES SPECS.

ALUCOBOND® PLUS SPECIFICATIONS:ALUCOBOND® PLUS ALUMINIUM COMPOSITE MATERIAL (ACM) SHALL BE6MM THICK AND CONSIST OF 2 LAYERS OF 0.5MM THICK ALUMINIUMSANDWICHING A MINERAL FILLED FIRE RESISTANT CORE CONTAINING 70%NON COMBUSTIBLE MINERAL FILLING.THE ALUMINIUM SKINS SHALL BE OF ALLOY ALMG 1- NS41 (EN AW 5005ANEAREST EQUIVALENT) HAVING AN ULTIMATE STRENGTH OF 130 MPAAND 0.2% PROOF STRESS OF 90 MPA. ALUCOBOND SHEETING MUST BEFIXED WITH B20620 IMPULSE C15 BFP STRAIGHT BRADERS EVERY100MM AROUND THE EDGES TO TIMBER BATTENS AND STUDS. BE SURETO FIX EXTRA TIMBER PEICES AROUND ALUCOBOND EDGES WHERETHERE ARE GAPS AND NO TIMBER TO FIX TO.

VELUX ROOF WINDOWS SPECIFICATIONS:VELUX ROOF WINDOWS AND MATERIALS THAT IT CONSISTS OF TO MEETTHE REQUIREMENTS OF AS4285 SKYLIGHTS, AS1288 OVERHEAD GLAZINGAND AS3959 BUSHFIRE FOR BAL 40 REQUIREMENTS AND AS1530.1 NON-COMBUSTIBILITY.. MUST BE INSTALLED TO MANUFACTURERESSPECIFICATIONS AND SEALED APPROPRIATELY TO ENSURE THERE IS NOWATER INGRESS. SEE DETAIL ON W16

CONCRETE SPECIFICATION:300X300 INTERNAL BEAMS TO CONTAIN 3-L11TM REINFORCMENT STEEL30MM FROM BOTTOM OF BEAM AND @ 6M MAX CTRS.GARAGE SLAB FFL 8864.400X300 EXTERNAL EDGE BEAMS TO CONTAIN 3-L11TM REINFORCEMENTMESH 30MM FROM BOTTOM OF BEAM.CONCRETE MANUFACTURED MUST BE IN ACCORDANCE WITH AS3700

STANDARD CORE 13MM PLASTERBOARD TO BE FIXED ALONG WALLSSTUDS AND 15MM FROM SHEET EDGES AND ENDS WITH 30MM 'W' TYPEPLASTERBOARD SCREWS. SERVIES MUST BE IN PLACE BEFOREINSTALLATION. ENSURE FRAMING IS PLUMB, LEVEL &SQUARE AND THATTHE AREA IS WEATHER PROOF. ENSURE THAT STUD SPACING TAKESINTO ACCOUNT THE WIDTH OF PLASTERBOARD SHEETS AND ALLOWSFIXING POINTS AT ITS EDGES.

ALL PLASTERBOARD AND ITS RESPECTIVE INSALLATION MUST COMPLYWITH AS2589-GYPSUM LININGS.

ALUCOBOND SPARKLING BLACKMETALLIC 888 SEALED WITH BLACKSILICONEFIXED WITH B20620 IMPULSE C15BFP STRAIGHT BRADERS




100X25 TURPENTINE DECKINGINTERGRAIN REDWOOD'NATURAL' STAIN FIXED WITH 50MMGAL CLOUTS


HIGHGROVE TOUGHENED SAFETYGLASS 1200X1300X12 PANELSTAINLESS STEEL FIXING TOMANUFACTURERESSPECIFICATIONS

2500

1855

lower floor

level 1

level 2

higher floor500

0

3000

4855

3000

1855


ROOFSPACE ROOFSPACE

90MM TIMBER STUD WALL WITHCHARCOAL NORSTONE ROCK PANELCLADDING INSTALLEDMANUFACTURERES SPECS..

180X45 MGP10 RAFTERFIXED TO 35X90 MGP10 ROOF BATTENS @900MMCNTRS WITH 100X2.8MM BRIGHT 'D' HEAD MACHINEDRIVEN NAILS. BATTENS SHOULD BE FIXED WITH3.1MMX90MM GAL SHANK NAILS @450MM CNTRS

STANDARD CORE 13MM PLASTERBOARD TO BE FIXEDALONG WALLS STUDS AND 15MM FROM SHEET EDGESAND ENDS WITH 30MM 'W' TYPE PLASTERBOARDSCREWS. CEILING MUST HAVE PEER 16X6000MM0.38BMT DOMESTIC CEILING BATTEN FCDB-60 @450CNTRS INSTALLED TO MANUFACTURERES SPECSPRIOR TO FIXING PLASTERBOARD. ALL PLASTERBOARDAND ITS RESPECTIVE INSALLATION MUST COMPLY WITHAS2589-GYPSUM LININGS.

STANDARD CORE 13MMPLASTERBOARD TO BEFIXED ALONG WALLSSTUDS AND 15MM FROMSHEET EDGES ANDENDS WITH 30MM 'W'TYPE PLASTERBOARDSCREWS.

DW


500MM FLOOR HEIGHTCHANGE. SEE DETAIL ONW16.

150MM CONCRETE SLAB TO BECONSTRUCTED IN ACCORDANCE WITHAS2870 AND USING SL82 ASREINFORCEMENT MESH 30MM FROMTOP.

R2.7 1160X580 HIGH PERFORMANCEGOLD BRADFORD INSULATION BATTSCUT TO FIT SECURED WITH 13MMSTANDARD CORE PLASTERBOARD.

10 5 4 3 217

1

1

INTERNAL REINFORCEDCONCRETE BEAM 300X300

GENERAL NOTES

external cladding notes

INTERNAL cladding notes

1

W09




R2.7 1160X580 HIGH PERFORMANCE GOLDBRADFORD INSULATION BATTS CUT TO FITSECURED WITH 13MM STANDARD COREPLASTERBOARD.

100X25 TURPENTINE DECKINGINTERGRAIN REDWOOD'NATURAL' STAIN FIXED WITH 50MMGAL CLOUTS


HIGHGROVE TOUGHENED SAFETYGLASS 1200X1300X12 PANELSTAINLESS STEEL FIXING TOMANUFACTURERESSPECIFICATIONS


180X45 MGP10 RAFTERFIXED TO 35X90 MGP10 ROOF BATTENS @900MMCNTRS WITH 100X2.8MM BRIGHT 'D' HEAD MACHINEDRIVEN NAILS. BATTENS SHOULD BE FIXED WITH3.1MMX90MM GAL SHANK NAILS @450MM CNTRS

STANDARD CORE 13MM PLASTERBOARD TO BE FIXEDALONG WALLS STUDS AND 15MM FROM SHEET EDGESAND ENDS WITH 30MM 'W' TYPE PLASTERBOARDSCREWS. CEILING MUST HAVE PEER 16X6000MM0.38BMT DOMESTIC CEILING BATTEN FCDB-60 @450CNTRS INSTALLED TO MANUFACTURERES SPECSPRIOR TO FIXING PLASTERBOARD. ALL PLASTERBOARDAND ITS RESPECTIVE INSALLATION MUST COMPLY WITHAS2589-GYPSUM LININGS.


500MM FLOOR HEIGHTCHANGE. SEE DETAIL ONW15.

150MM CONCRETE SLAB TO BECONSTRUCTED IN ACCORDANCE WITHAS2870 AND USING SL82 ASREINFORCEMENT MESH 30MM FROMTOP.

INTERNAL REINFORCEDCONCRETE BEAM300X300

100X25 TURPENTINE CLADDINGINTERGRAIN REDWOOD'NATURAL' STAIN FIXED WITH50MM GAL CLOUTS

18

9 14

20

17

EXTERNAL REINFORCEDCONCRETE BEAM300X400

6MM FIBRE CEMENTSHEETING FIXED TO2X180X45MM MGP10 RAFTERSW/ 50MM GAL CLOUTS

lower floor

level 1

0

3700

3700

higher floor500

LEVEL 13200

300MM MGP10 STUD WALL.500MM HIGH WITH 13MM STANDARD COREPLASTERBOARD PAINTED 'NATURAL WHITE'

Scale Checked by

Drawn by

Date Project number

1 : 100

Sections

P1.0



Author

HALEN MOKA


1 : 100

Section 31

1 : 100

Section 52


RO

DU

CE

D B

Y A

N A

UTO

DE

SK

STU

DE

NT P

RO

DU

CT


RO

DU

CE

D B

Y A

N A

UTO

DE

SK

STU

DE

NT

PR

OD

UC

T

1

W08

2

W08

90MM STUD WALL WITH 80MMINSULATION BATTS.6MM FIBRE CEMENT SHEETINGTO BE FIXED TO STUDSOVER WATER PROOFINGMEMBRANE.20X50MM VERTICAL BATTENS TOBE FIXED TO CEMENT SHEETINGAND50X50MM HORIZONTAL BATTENSTO BE FIXED TO VERTICALBATTENS.SEE GENERAL NOTES FORCONSTRUCTION METHODS.

COLOURBOND CORRGATED ROOFING IRONINSTALLED TO MANUFCTURERES SPECS'MONUMENT'

200X38MM TURPENTINE FASCIA BOARDFIXED W/50MM GAL FLATHEAD NAILS


100X25 TURPENTINE DECKINGINTERGRAIN REDWOOD STAINFIXED WITH 50MM GAL SELF-DRILLING SCREWSSEE DECKING DETAIL ON W15

ALUCOBOND SPARKLING BLACKMETALLIC 888 SEALED WITHBLACK SILICONEFIXED WITH B20620 IMPULSE C15BFP STRAIGHT BRADERS

90MM COLOURBOND LYSAGHTQUAD GUTTER 'MONUMENT'FIXED TO MANUFACTURERES SPECSDN 100 TYPE C U-PVC DOWNPIPE'MONUMENT'LOW GLOSS FINISH220mm X 140mm METAL RAINWATERHEADFIXED TO CLADDING USINGMANUFACTURERS SPECS

100X25 TURPENTINE DECKINGINTERGRAIN REDWOOD 'NATURAL' STAINFIXEDFIXED WITH 50MM GAL SELF-DRILLINGSCREWSSEE DECKING DETAIL ON W15

HIGHGROVE TOUGHENED SAFETYGLASS 1200X1300X12 PANELSTAINLESS STEEL FIXING TOMANUFACTURERES SPECIFICATIONSSEE W15.

INDICTIVE POSITION OF PREMIUM LINEGERMAN SOLAR, SOLAR PANELSINSTALLED TO MANUFACTURERES SPECIFICATIONS

INDICTIVE POSITION OF PHOTOVOLTAICS FORSOLAR HOT WATER SYSTEMINSTALLED TO MANUFACTURERESSPECIFICATIONS

INDICTIVE POSITION OF 2500L RHEEM PREMIER®HILINE SOLAR HOT WATER HEATER GAS BOOSTED.MODEL: 52H180K/1S-GINSTALLED TO MANUFACTURERES SPECIFICATIONS

SKYDOME LOW E DOUBLE GLAZEDBLACK ALUMINIUM FRAME INSTALLEDTO MANUFACTURERES SPECS AND SEALED APPROPRIATELY

100X25 TURPENTINE CLADDINGINTERGRAIN REDWOOD STAINFIXED WITH 50MM GAL SELF DRILLING SCREWS

150MM CONCRETE SLAB TO BE CONSTRUCTED INACCORDANCE WITH AS2870 AND USING SL82 ASREINFORCEMENT MESH 30MM FROM TOP.

300MM TIMBER FRAMED PARTITION WALL WITH 13MM PLASTERBOARD LINING

2x240x45 MGP12 RIDGEBOARDFIXED W/ PRYDA 100X35X1.0MMMULTIGRIP BRACKET AND 50MM GAL NAILS

35X90 MGP10 ROOF BATTENS @450MM SPACESFIXED WITH 3.1MMX90MM GAL SHANK NAILS

PEER 16X6000MM 0.38BMTDOMESTIC CEILING BATTEN FCDB-60 @450 CNTRSTO BE INSTALLED TO MANUFACTURERES SPECS

HIGHGROVE TOUGHENED SAFETYGLASS 1200X1300X12 PANELSTAINLESS STEEL FIXING TOMANUFACTURERES SPECIFICATIONS

GENERAL NOTES

ALL DOORS TO BE INSTALLED TO MANUFACTURERES SPECSTIMBER CLADDING MUST NOT SIT ON TIMBER FRAMEWATER PROOFING TO OVERHANG OVER DOOR FRAME APPROPRIATELYTO ENSURE CORRECT WATER RUNOFF AND PREVENT MOISTURE BUILD-UP.REFER TO DOOR SCHEDULE FOR DOOR AND GLAZING SPECIFICATIONS.

ALL STRUCTURAL STEEL TO BE PROTECTED IN ACCORDANCE WITH AS2312.

ALL BRICKWORK TO BE CONSTRUCTED IN ACCORDANCE WITH AS4773MASONRY IN SMALL BUILDINGS.

FORMWORK FOR INSITU CONCRETE WALL TO BE CONSTRUCTED INACCORDANCE WITH AS3610 FORMWORK FOR CONCRETE.

RETAINING WALL TO BE BUILT IN ACCORDANCE WITH AS4678 EARTHRETAINING STRUCTURES.

ALL STORMWATER GUTTERS, PIPES AND SERVICES TO BE CONSTRUCTED INACCORDANCE WITH ASNZS 3500.3 PASRT 3 STORMWATER DRAINAGE

ALL CONCRETE STRUCTURES TO BE CONSTRUCTED IN ACCORDANCE WITHAS 3600 CONCRETE STRUCTURES. CONCRETE SLAB TO CONSTRUCTED INACCORDANCE WITH AS2870 RESIDENTIAL SLABS AND FOOTINGS.

90MM COLOURBOND LYSAGHTQUAD GUTTER 'MONUMENT'FIXED TO MANUFACTURERES SPECSDN 100 TYPE C U-PVC DOWNPIPE 'MONUMENT'LOW GLOSS FINISH220mm X 140mm METAL RAINWATER HEADFIXED TO CLADDING USING MANUFACTURERSSPEC

200X38MM TURPENTINE FASCIA BOARDFIXED W/50MM GAL FLATHEAD NAILS

200X125MM STEEL RHSINSTALLED AND FIXED TOENGINEERS SPECS

PRYDA 130X90MM HEAVY DUTYGAL STEEL STIRRUP POST ANCHOR

200X200X500 CONCRETEFOOTING

90MM TIMBER STUD WALL WITH CHARCOALNORSTONE ROCK PANEL CLADDING INSTALLEDMANUFACTURERES SPECS..

150X100UA10 STEEL ANGLE BEAMTO BE INSTALLED TO ENGINEERS SPECS

SLIDING DOOR TO BE INSTALLED TOMANUFACTURERES SPECS

external cladding NOTES

WALL MUST BE SARKED AND EXTERNALLY FIXED WITH 6MM CEMENTSHEETING USING 30MM GAL CLOUTS. 20X50 VERTICAL TIMBER BATTENS TOBE PLACED AT 600 CNTRS AND FIXED WITH 65MM GAL BATTEN SCREWS.A 12MM GAP AT THE TOP OF THE WALL AND A 200MM GAP AT THEBOTTOM OF THE WALL MUST BE LEFT TO ALLOW AIRFLOW BEHIND THETIMBER CLADDING.

50X50 HORIZONTAL BATTENS TO BE FIXED TO VERTICAL BATTENS AT 600CNTRS WITH 65MM BATTEN SCREWS. ENSURE A GAP OF 8MM BETWEENTIMBER CLADDING AND EDGE BATTEN.EXTRA PEICES OF BATTEN TO BE ATTATCHED AT JOINTS TO FIXSHORTER PEICES OF CLADDING WHERE REQUIRED.50X2.8MM BRIGHT 'D' HEAD MACHINE DRIVEN NAILS TO BE USED TO FIX100X25MM TURPENTINE SHADOW CLADDING. IF NAILS ARE LESS THAN 30MMFROM THE END OF THE PEICE OF TIMBER, A PILOT HOLE MUST BEDRILLED PRIOR TO FIXING. END GRAIN TO BE SEALED AND INTERGRAINREDWOOD STAIN TO BE APPLIED TO CLADDING AS PER MANUFACTURERESSPECS.

FEATURE WALL AND STONE WALL AT THE FRONT OF THE PROPERTY ANDATTATCHED CUSTOM MAILBOX TO BE CONSTRUCTED OF ECO-OUTDOORDRYSTONE 'ALPINE' WALL PANELS GLUED ON TOP OF 6MM FIBRE CEMENTSHEETING APPROPRIATELY FIXED TO A TIMBER WALL FRAMED WALL USING30MM GAL CLOUTS. THE LOCATION OF THIS WALL AND ASSOCIATEDCURVE WILL BE INDICTIVE AND FOLLOW THE EDGE AND LENGTH OF THEDRIVEWAY AND THE FRONT OF THE PROPERTY EDGE UNTILL OT REACHESTHE MAILBOX AND FENCE AND THEN CONTINUE UNTILL IT REACHES THEEASTERN FENCE. HEIGHT OF THE FENCE TO STAY LEVEL ALONG ITSLENGTH.

SERVICES MUST BE IN PLACE BEFORE INSTALLATION. ENSURE FRAMING ISPLUMB, LEVEL &SQUARE AND THAT THE AREA IS WEATHER PROOF.ENSURE THAT STUD SPACING TAKES INTO ACCOUNT THE WIDTH OFPLASTERBOARD SHEETS AND ALLOWS FIXING POINTS AT ITS EDGES.STANDARD CORE 13MM PLASTERBOARD TO BE FIXED ALONG WALLSSTUDS AND 15MM FROM SHEET EDGES AND ENDS WITH 30MM 'W' TYPEPLASTERBOARD SCREWS .CEILING MUST HAVE PEER 16X6000MM 0.38BMT DOMESTIC CEILINGBATTEN FCDB-60 @450 CNTRS INSTALLED TO MANUFACTURERESSPECS PRIOR TO FIXING PLASTERBOARD. ALL PLASTERBOARD AND ITSRESPECTIVE INSALLATION MUST COMPLY WITH AS2589-GYPSUM LININGS.

INTERIOR FEATURE WALL TO BE A 90MM TIMBER STUD WALL WITHCHARCOAL NORSTONE ROCK PANEL CLADDING INSTALLED TOMANUFACTURERES SPECS.. WALL TO RUN THE LENGTH OF THE HOUSE.

FINISHED FLOOR SURFACE ALONG HALLWAY TO BE CONSTRUCTED OFPOLISHED CONCRETE. LIVING SPACES INCLUDING BEDROOMS, KITCHEN,LIVING ROOM AND DINING TO BE 100X25 TURPENTINE SHIPLAP TIMBERFLOORING WITH NATURAL STAIN. FOR LOCATION OF FLOOR TYPES ANDAREA SEE W10.

BATHROOMS AND LAUNDRY FLOORS TO BE TILED WITH GLAZED POPARLIGHT GREY BEAUMONT FLOOIRING TILES WITH A LIGHT GREY MORTAR.WATERPROOFING TO OCCUR IN THESE AREAS APPROPRIATELY. SEE WETAREA DETAIL ON W15.

INTERNAL LINING NOTES

19

20

17

SEE INTERNALELEVATION

124.

04°

152.21°

96.92°

PARTITION WALLAND SHELVING90MM TIMBER FRAMEDSTUD WALL WITH 13MMPLASTERBOARD.

REF

Scale Checked by

Drawn by

Date Project number

As indicated

Sections II

P1.0



Author

HALEN MOKA



RO

DU

CE

D B

Y A

N A

UTO

DE

SK

STU

DE

NT P

RO

DU

CT


RO

DU

CE

D B

Y A

N A

UTO

DE

SK

STU

DE

NT

PR

OD

UC

T

MASTER BEDROOM

ENSUITE

WIR

DOUBLE GARAGE

STORAGE

LIVING KITCHEN

DINING

BATH

LAUNDRY

BED 1

BED 2

STUDY

DECKING

2

1

FFL400

FFL1190

UP

OVERHEAD ROOF LINE

SL

SL

SL

SL

SL

SL

SL

LEGEND

ELECTRICAL CABLES

TYPE A

TYPE B

TYPE E

TYPE C

SMOKE ALARM

TYPE D

DOUBLE GENERAL POWER OUTLET

1 POINT LIGHT SWITCH



METERBOX

DOUBLE GENERAL POWER OULET

TELEPHONE CONNECTION POINT

TELEVISION POINT

STRH

REF

PTY

DW

WMDR

NORTH

SMOKE DETECTORS TO BE INSTALLED IN ACCORDANCE WITH AS 3786-1993ALL ELECTRICAL INSTALLATION MUST MEET THE REQUIREMENTS OF AS3000.

SMOKE ALARMS LOCATED AT THE FRONT END OF THE HALLWAY, THEEND OF THE HALLWAY AND NEAR THE DOOR TO THE GARAGE IN THELIVING ROOM. EXACT POSITIONING TO COMPLY WITH BCA CL: 3.7.2.3

ALL ELECTRICAL WORKS TO BE CONDUCTED BY A REGISTEREDELECTRIAN.

LIGHTING FIXTURES AND LOCATIONS MUST BE INSTALLED IN ACCORDANCEWITH AS1680.

MECHANICAL VENTILATION TO COMPLY WITH AS1668.

General Notes

TYPE: A QUANTITY: 9MINIWOODY LED 42W FACADE LAMPLED SPOT LAMP FOR CEILING/WALL MOUNTED SPOT LIGHTING.

TYPE: B QUANTITY: 57LEDLUX 14W 92MM NON-DIMMABLE CNC ALUMINIUM ROUND DOWN LIGHT.CEILING MOUNTED DOWNLIGH FOR AMBIENT LIGHTING.

TYPE: C QUANTITY: 4T5 STARCOAT 80W LINEAR FLUROSCENT LAMP FOR CEILING MOUNTEDGARAGE LIGHTS.

TYPE: D QUANTITY: 8THERMALITE DELUXE 3 IN 1 BATHROOM HEATER 4X275W HEAT LAMPS.STAINLESS STEEL HOUSING WITH BUILT IN EXHAUST AND HEAT LAMPS.

TYPE: E QUANTITY: 59HPM 12V 0.3W LED DECK LIGHTS.RECESSED DECKING LIGHTS AND PERIMETER POOL LIGHTING.

SMOKE ALARM TYPE:WORMWALD TYCO 614P PHOTOELECTRIC SMOKE DETECTOR.

LIGHTING TYPES

ELECTRICAL CONTRACTOR TO BE SOLELY RESPONSIBLE FOR FORSTRICT COMPLIANCE WITH ALL SAFETY STANDARDS, REGULATIONS ANDAUTHORITY REGULATIONS.

CONTRACTOR REQUIRED TO ENSURE ALL ELECTRICAL WORK TO BETESTED BY THE RESPINSOBLE ELECTRICAL SUPPLY AUTHORITY AFTERTHE COMPLETETION AND INSTALLTION OF ALL WORKS INVOLVED.

ANY CERTIFICATES, PERMITS AND APPROVALS ARE TO BE FOWARDED TOOWNER AS THEY ARE RECIEVED.

UNLESS OTHERWISE NOTED ALL GPO'S TO BE FLAT 3 PIN TYPE. SEEDRAWING FOR LOCATIONS.

ALL GPO'S EXCEPT FOR BENCHTOP GPO'S TO BE FIXED AT 300MMABOVE FFL. BENCH TOP GPO'S TO BE FIXED 300 ABOVE BENCHTOP.

PH

PH

PH

PH

PH

Scale Checked by

Drawn by

Date Project number

1 : 100

Electrical Plan

P1.0



Author

HALEN MOKA



RO

DU

CE

D B

Y A

N A

UTO

DE

SK

STU

DE

NT P

RO

DU

CT


RO

DU

CE

D B

Y A

N A

UTO

DE

SK

STU

DE

NT

PR

OD

UC

T

MASTER BEDROOM

ENSUITEWIR

DOUBLE GARAGE

STORAGE

LIVING KITCHEN

DININGBATH

LAUNDRY

BED 2

STUDY

ROOF LINE

SL

SL

SL

SL

SL

SL

SL

LEGEND

SKYLIGHT

SMOKE ALARM

TYPE A

TYPE B

TYPE C

TYPE D

CEILING PITCH CHANGE

INDICTIVE LOCATION OFMANHOLE

SL

PTY

WMDR

NORTH

SL

SL

ROOF LINE

CEILING

PITCH

CHA

NGE

CEILING

PITCH

CHA

NGE

SMOKE DETECTORS TO BE IN ACCORDANCE WITH AS 3786-1993.

ALL ELECTRICAL WORKS AND INSTALLATION TO BE CONDUCTED BY AREGISTERED ELECTRIAN AND IN ACCORDANCE WITH AS/NZS3000.

LIGHTING FIXTURES AND LOCATIONS MUST BE INSTALLED IN ACCORDANCEWITH AS1680.

ALL INTERIOR LIGHTING MUST COMPLY WITH AS/NZS 1680.1 INTERIORLIGHTING PART 1 GENERAL PRINCIPLES.

ALL CEILINGS TO BE 13MM STANDARD CORE PLASTERBOARD.CEILING MUST HAVE PEER 16X6000MM 0.38BMT DOMESTIC CEILING BATTENFCDB-60 @450 CNTRS INSTALLED TO MANUFACTURERES SPECS PRIORTO FIXING PLASTERBOARD. ALL PLASTERBOARD AND ITS RESPECTIVEINSALLATION MUST COMPLY WITH AS2589-GYPSUM LININGS.

SERVICES MUST BE IN PLACE BEFORE PLASTERBOARD INSTALLATION.ENSURE FRAMING IS PLUMB, LEVEL &SQUARE AND THAT THE AREA ISWEATHER PROOF. ENSURE THAT CEILING BATTEN SPACING TAKES INTOACCOUNT THE WIDTH OF PLASTERBOARD SHEETS AND ALLOWS FIXINGPOINTS AT ITS EDGES. STANDARD CORE 13MM PLASTERBOARD TO BEFIXED ALONG CEILING BATTENS AND 15MM FROM SHEET EDGES AND ENDSWITH 30MM 'W' TYPE PLASTERBOARD SCREWS .

TYPE: A QUANTITY: 9

MINIWOODY LED 42W FACADE LAMPLED SPOT LAMP FOR CEILING/WALL MOUNTED SPOT LIGHTING.

TYPE: B QUANTITY: 57

LEDLUX 14W 92MM NON-DIMMABLE CNC ALUMINIUM ROUND DOWN LIGHT.CEILING MOUNTED DOWNLIGH FOR AMBIENT LIGHTING.

TYPE: C Quantity: 4

T5 STARCOAT 80W LINEAR FLUROSCENT LAMP FOR CEILING MOUNTEDGARAGE LIGHTS.

TYPE: D Quantity: 8

THERMALITE DELUXE 3 IN 1 BATHROOM HEATER 4X275W HEAT LAMPS.STAINLESS STEEL HOUSING WITH BUILT IN EXHAUST AND HEAT LAMPS.

SMOKE ALARM TYPE:WORMWALD TYCO 614P PHOTOELECTRIC SMOKE DETECTOR.

General Notes

ROOF

LINE

FIXED CEILING LIGHTING TYPES

MH

MH

MH

MH

Scale Checked by

Drawn by

Date Project number

1 : 100

Reflected Ceiling Plan

P1.0



Author

HALEN MOKA



RO

DU

CE

D B

Y A

N A

UTO

DE

SK

STU

DE

NT P

RO

DU

CT


RO

DU

CE

D B

Y A

N A

UTO

DE

SK

STU

DE

NT

PR

OD

UC

T

MASTER BEDROOM4m X 4.7mCARPET

ENSUITE4m X 3.4m

TILESWIR4m X 1.3mCARPET

DOUBLE GARAGE6.7m X 4.2mCONCRETE

STORAGE0.8m X 3.1mCONCRETE

LIVING7m X 4.3m

FLOORBOARDS

KITCHEN7.2m X 5m

FLOORBOARDS

DINING4.4m X 4.2m

FLOORBOARDS

BATH1.9m X 4.7m

TILES

LAUNDRY4.7m X 1.5m

TILES

BED 13.4m X 4.7mCARPET

BED 24.3m X 4.7mCARPET

STUDY2.5m X 4.7m

FLOORBOARDS

100X25 TURPENTINE DECKINGINTERGRAIN REDWOOD 'NATURAL' STAINAND TO COMPLY WITH APPENDIX E OF AS 3959 2009.24m2

400

1190

950

950

650

2920

260 3120 260 1020 800 1935 400 1930 400 655 260

1640

8360

21510

31510

11040

260 3120 260 7140 260

1530 5260

260 3990 250 1280 720 605 2550 600 795

1567

036

6088

30

555

52528

552

51690

1405

195

1730

1720

1730

655

1730

3825

5252

8052

542

7552

543

6536

9076

0

2

1

FFL400

FFL1190

7180

872

1650

3320

4385

915

900

3230

1205

2646

2965

1960

2195

1820 1755 1310

1

2

3

4

56

7

89

10

11

14

12

13

15

16

17

18

19

20

1

2

4

5

6

7

8

9

3016

UP

CONCRETEFLOORINGPOLISHEDFINISH

TILEDFLOORING

OVERHEAD ROOF LINE

SL

SL

SL

SL

SL

SL

SL

SL

SL

CW5

STRH

REF

PTY

DW

WMDR

NORTH

1

W08

1

W09

2

W08

OVE

RHEA

D BEA

M

STRUCTURALCOLUMN

300MM PARTITION WALL

EJ EJ

POOL GATE TO OPENAWAY FROM POOL WITHSELF CLOSING SAFETY LATCH1500MM HIGH MIN.

OVE

RHE

AD W

INDO

W

9 10

12

GENERAL NOTES

DECKING NOTES: DECKING TO BE MADE OF 130X30 TURPENTINE DECKING WITH 3MM GAP AND FIXEDWITH 50MM SELF DRILLING STAINLESS STEEL SCREWS.TIMBER POSTS TO BE 100X100 TURPENTINE POSTS ON 100MM GAL STIRRUPS WITH TERMITE CAPPING.TURPENTINE DECKING TO BE STAINED WITH INTERGRAIN REDWOOD STAIN TO MANUFACTURERESSPECIFICATIONS. DECKING MATERIAL AND INSTALLATION TO COMPLIE WITH THE REQUIREMENTS FORBAL12.5 AS STATED IN AS 3959.

STAIRS TO BE CONSTRUCTED FROM 20MPA CLASS 1 FINISH CONCRETE.

BRICK VENNER WALLS TO BE CONSTRUCTED IN ACCORDANCE WITH AS 3700-2001 Section 12

INTERIOR LINING OF ALL WALLS TO BE 13MM PLASTERBOARD NATURAL WHITE COLOUR. EXCLUDINGGARAGE INTERIOR WALLS. REFER TO MANUFACTURER FOR INSTALLATION AND W06 AND W07INTERNAL CLADDING NOTES.

SMOKE ALARMS LOCATED AT THE FRONT END OF THE HALLWAY, THE END OF THE HALLWAY ANDNEAR THE DOOR TO THE GARAGE IN THE LIVING ROOM. EXACT POSITIONING TO COMPLY WITH BCACL: 3.7.2.3

DOWNPIPE SPECS ARE SHOWN IN DETAIL ON WO6 AND WO7 ELEVATIONS AND IN PLAN ON W05ROOF PLAN.

ALL WINDOW AND DOOR SIZES ARE NOMINAL. SPECIFICATIONS ARE SHOWN ON W01 DOOR ANDWINDOW SCHEDULE.

REFER TO ENGINEERS SPECIFICATIONS FOR STEEL CONSRUCTION.

MECHANICAL VENTILATION TO COMPLY WITH AS1668.

CARPET AND TILES IS TO BE INSTALLED TO MANUFACTURERS SPECIFICATIONS.

INTERIOR WALLS ARE 90MM STUD WALLS EXCEPT FOR THE WALLS SEPERATING THE GARAGEFROM THE LIVING ROOM AND HALLWAY. AND TO BE CONSTRUCTED IN ACCORDANCE WITH AS 1684.4.ALL EXTERNAL WALLS ARE TO HAVE 10MM X 38MM THERMABLOK STRIPS INSTALLED ON THEINTERNAL SIDE OF THE STUD UNDERNEATH THE 13MM PLASTERBOARD. REFER TO MANUFACTURERSSPECS.

FOR EXTERIOR WALL EXTERNAL LININGS REFER TO W06 AND W07

FOR EXACT POSITIONING OF CABINETRY REFER TO W14 AND W15

CUSTOM WINDOWS ARE TO BE INSTALLED TO MANUFACTURERS SPECIFICATIONS AND INACCORDANCE ITH AS 2047.

SANITARY COMPARTMENTS TO BE IN ACCORDANCE WITH B.C.A, DOOR TO BE EITHER REMOVABLE IFLESS THAN 1200mm BETWEEN TOILET AND DOOR OR MUST OPEN OUTWARDS.ALL FLOOR WET AREAS ARE TO BE PROVIDED WITH IMPERVIOUS COVERINGS EXCEPT FOR THEKITCHEN. WALLS OF SHOWER AND AROUND BATH ARE TO BE IMPERVIOUS COVERINGS ALSO ORTILES OR GLASS.

METER BOX TO BE INSTALLED:STAINLESS STEEL 18 POLE SINGLE PHASE METER BOX MODELRS4852 WIRE, HALF DUPLEX , ISOLATED.

GARAGE WALLS ARE 240MM FIRE RATED BRICK VENEER WALLS AND TO BE CONSTRUCED INACCORDANCE WITH AS 3700 AND AS1684.4.

INTERNAL STAIRS AND FLOORBOARDS TO BE MADE OF CAMBIA AWA SHIPLAP 18MM TIMBERFLOORING INSTALLED TO MANUF'S SPECS.

TIMBER DECKING TO BE 100X25 TURPENTINE DECKING INTERGRAIN REDWOOD 'NATURAL' STAIN FIXEDWITH 50MM GAL SELF DRILLING SCREWS AND TO COMPLY WITH APPENDIX E OF AS 3959 2009.

SWIMMING POOL TO BE SELECTED BY CLIENT AND INSTALLED BY CERIFIED POOL CONTRACTORS TOTHE APPROPRIATE AND REQUIRED SAFETY REGULATIONS.

LEGEND

SPOT ELEVATION

SKYLIGHT

SMOKE ALARM

EXHAUST FAN

DOWN PIPE

260MM BRICK VENEER WALL

325MM PRECAST CONCRETE WALL

90MM TIMBER STUD WALL

DOOR TAG

WINDOW TAG

CUSTOM WINDOW TAG

GLASS BALUSTRADE

1000

SL

PTY PANTRY

DW DISHWASHER

WM WASHING MACHINE

ST STOVE

REF REFRIDGERATOR

RH RANGEHOOD

METER BOX

EXPANSION JOINT

6

6

CW1EJ

Scale Checked by

Drawn by

Date Project number

1 : 100

Floor Plan

P1.0



Author

HALEN MOKA



RO

DU

CE

D B

Y A

N A

UTO

DE

SK

STU

DE

NT P

RO

DU

CT


RO

DU

CE

D B

Y A

N A

UTO

DE

SK

STU

DE

NT

PR

OD

UC

T

GENERAL NOTES

LEGEND

GARAGE SLAB

LOWER SLAB SECTION

HIGHER SLAB SECTION

REBATE

RE-ENTRANT BARS

EDGE BEAMS

NORTH

300X300 INTERNAL BEAMS TO CONTAIN 3-L11TM REINFORCMENTSTEEL 30MM FROM BOTTOM OF BEAM AND @ 6M MAX CTRS.GARAGE SLAB FFL 8864

400X300 EXTERNAL EDGE BEAMS TO CONTAIN 3-L11TMREINFORCEMENTMESH 30MM FROM BOTTOM OF BEAM.

CONCRETE MANUFACTURED MUST BE IN ACCORDANCE WITHAS3700

3-L11TM RE-ENTRANT BARS MUST BE IMPLEMENTED INTO THESLAB @30MM OF THE TOP OF THE SLAB.200MM OVERLAP MUST OCCUR WHERE HOUSE SLAB MEETSTHE LOWERGARAGE SLAB.CONCRETE SLAB TO BE CONSTRUCTED IN ACCORDANCE WITHAS2870 AND USING SL82 AS REINFORCEMENT MESH 30MMFROM TOP.

FORMWORK FOR CONCRETE SLAB TO BE CONSTRUCTED INACCORDANCE WITH AS3610 FORMWORK FOR CONCRETE.

SLAB MUST BE CURED FOR 7 DAYS AND APPROVED BY AREGISTERED BUILDING SURVEYOR.

SOIL CLASSIFICATION IS: CLASS M

M RE-ENTRANT BARS AT INTERNAL CORNERSOF THE SLAB IN ACCORDANCE WITH BCA CL 3.2.5.3

NTERNAL REINFORCEDCONCRETE BEAM300X300

EXTERNAL REINFORCEDCONCRETE EDGE BEAM400X300

SLAB STEP DOWN OF250MM REFER TODETAIL

400

GARAGE SLAB

650

1180

STEP DOWN OF125MMREFER TO DETAIL

150MM REBATE TOALLOW FOR BRICKVENEER CONSTRUCTION

Scale Checked by

Drawn by

Date Project number

1 : 100

Slab Plan

P1.0



Author

HALEN MOKA



RO

DU

CE

D B

Y A

N A

UTO

DE

SK

STU

DE

NT P

RO

DU

CT


RO

DU

CE

D B

Y A

N A

UTO

DE

SK

STU

DE

NT

PR

OD

UC

T

. .600

942

1190

1206 710 710 710 710

1414

262

981 1190

1206

SB

RH

ST

1

W14

3

W14

4

W14

REF

OV

PTY

1206

3024

571

3418

2646

772

534

1745

1203

9024

2246

6

1270

1162

3251 669914

610

330

321

725

9097

2197 132

485

4

9

8

130x14MM SPOTTED GUM OVERLAYFLOORBOARDS

DW

SHELVING

WINERACKS

772 447 1143 1295 92 1203 1745 515

295 525 399 2441 90 1343 525 278 525 812

320

1174 806 1894 806 2545

1190 1070

OV

REF

ST

RH

SK

1449

15269 8

4

1417

762

442

914914

914

914

1190 1190 1190

253 1190 1190 589

SBSK

PB

STACKABLEMAGNUMWINERACKS

Scale Checked by

Drawn by

Date Project number

As indicated

Internal Elevations

P1.0



Author

HALEN MOKA


1 : 50

Section 61

1 : 50

Internal Plan Kitchen2

1 : 50

Section 73 1 : 50

Section 84

KITCHEN INTERNAL ELEVATIONS

KITCHEN INTERNAL PLAN

SKYLIGHTS: SKYDOME VELUX/VSE LOW E DOUBLE GLAZED BLACK ALUMINIUM FRAME INSTALLED, SEALED AND

WATERPROOFED TO MANUFACTURERES SPECS.

SPLASHBACK: DARK SLATE GLASS SPLASHBACK

RANGEHOOD 24" ISLAND RANGEHOOD STAINLESS STEEL ROUND CHIMNEY KA-123-CS.

KITCHEN WALL X8 KABOODLE 1200MM 2 DOOR WHITE WALL HUNG CABINET.HUNG CABINETS: W/SILVER ANODISED ALUMINIUM 'G' STYLE GRIP HANDLES.

KITCHEN BASE X3 KABOODLE 710MM 4 DRAWER WHITE BASE CABINETCABINETS: X3 KABOODLE 710MM 3 DRAWER WHITE BASE CABINET W/SILVER ANODISED ALUMINIUM 'G' STYLE GRIP HANDLES.

19MM MOISTURE RESISTANT NATURAL WHITE MELAMINE PARTICLE BOARD WITH HIGH GLOSS FINISH.

ENSURE CABINETRY IS FIXED AND LEVELED TO PREVENT DOORS FROM SWINGING OPEN UNINTENTIONALLY AND TO

CREATE AN EVEN FIX WITH THE COUNTERTOP.

ALL WALL HUNG CABINETS MUST BE FIXED USING THEPROVIDED WALL ANCHORS AND SCREWS TO THE WALL

STUDS.

REFRIDGERATOR: JENN-AIR 25.02 CU. FT. SIDE-BY-SIDE REFRIDGERATOR STAINLESS STEEL.

OVEN: KITCHENAID 30" SINGLE ELECTRIC WALL OVEN STAINLESS STEEL. MUST BE INSTALLED BY CERTIFIED ELECTRICIAN.

PANTRY 1300MM BEDFORD 2 DOOR WHITE FREESTANDING PANTRY MUST BE INSTALLED TO MANUFACTURERES SPECIFICATIONS

FLOORBOARDS: 130X14MM NSW SPOTTED GUM CLASS 1 DURABILITY FLOORBOARDS.DURBAILITY: CLASS 1GRADE: STANDARD AND BETTERCOLOUR: WARMLENGTHS: RANDOM LENGTHS OF 0.4M-2.4M.

NOTES: FLOORBOARDS TO BE GLUED OVER 19MM PARTICAL BOARDSUBFLOOR

CEASAR STONE:. KITCHEN COUNTERTOP TO BE OSPREY CEASERSTONE W/PENCIL ROUNDED EDGES.

KITCHEN TAP: X2 GESSI OXYGENE PULL OUT SPRAY KITCHEN MIXER BLACK SPOUT

KITCHEN SINK: X2 SCHOCK STONE DOUBLE BOWL UNDERMOUNT KITCHEN SINK BLACK.

COOKTOP: KITCHENAID 40" GAS COOKTOP- STAINLESS STEEL MUST BE INSTALLED BY CERTIFIED ELECTRICIAN..

SHELVING: CHICAGO 8 BOX 1200MM TIMBER SHELVING BY BLUE DOT. INSTALLED TO MANUFACTURERES SPECIFICATIONS.

DISHWASHER: TO BE SELECTED BY CLIENT INSTALLED BY CERTIFIED PLUMBER

OVEN AND COOKTOP TO BE CONNECTED ANDINSTALLED BY A REGISTERED ELECTRICIAN TOMANUFACTURERES SPECIFICATIONS.

DISHWASHER, BASINS AND TAPWARE TO BEINSTALLED BY REGISTERED PLUMBER.

WINERACKS ARE FREE STANDING AND STACKABLEAND ARE NOT TO BE FIXED TO EACHOTHER, THEFLOOR OR THE WALL.

SHELVING TO BE SINTALLED TO MANUFACTURERESSPECIFICATIONS.

ALL WALLS TO BE PAINTED WITH DULUX NATURALWHITE PAINT.

DURING INSTALLATION OF SPLASHBACK THE SURFACEAREA MUST BE CLEAN AND ALL WALL FIXINGS MUSTBE FLUSH OR RECESSED INTO THE WALL., A 6MMGAP MUST BE LEFT WHERE PANELS MEET AT ANYCORNERS AND AT EACH END. A 3MM GAP MUST ALSOBE LEFT WHERE PANELS MEET AND WHERE THEPANEL ABUTTS OVERHEAD CUPBOARDS OR WINDOWOPENINGS. ENSURE THE WALL IS PAINTED THE SAMECOLOUR AS THE PANEL WHERE SHEETS MEET. PANELMUST BE FIXED WITH DOUBLE SIDED TAPE AND A6MM BEAD OF ADHESIVE APPLIED IN A WAVEFORMATION ON THE UNDERSIDE OF THE PANEL.

EDGES WHERE COUNTERTOP MEETS SPLASHBACKAND AROUND KITCHEN BASIN TO BE SEALED ANDWATERPROOFED.

90MM PARTITION WALL PAINTEDNATURAL WHITE

CEASERSTONE COUNTERTOP

6MM OSPREY CEASERSTONE COUNTERTOPWITH ROUNDED PENCIL EDGES CEASERSTONE COUNTERTOP MUST BE FIXED TO A LEVEL

SURFACE AND GLUED TO THE KITCHEN BASE CABINETSAND PROTECTED DURING THROUGHOUT THECONSTRUCTION..

SERVICES MUST BE IN PLACE BEFORE INSTALLATION.ENSURE FRAMING IS PLUMB, LEVEL &SQUARE AND THATTHE AREA IS WEATHER PROOF. ENSURE THAT STUDSPACING TAKES INTO ACCOUNT THE WIDTH OFPLASTERBOARD SHEETS AND ALLOWS FIXING POINTS ATITS EDGES. STANDARD CORE 13MM PLASTERBOARD TO BEFIXED ALONG WALLS STUDS AND 15MM FROM SHEETEDGES AND ENDS WITH 30MM 'W' TYPE PLASTERBOARDSCREWS.ALL PLASTERBOARD AND ITS RESPECTIVE INSALLATIONMUST COMPLY WITH AS2589-GYPSUM LININGS.

OV KITCHENAID 30" SINGLE ELECTRIC WALL OVEN

PTY PANTRY

SB SPLASHBACK

DW DISHWASER TO BE SELECTED BY CLIENT

RH 24" ISLAND ROUND CHIMNEY RANGEHOOD KA-123-CS.

ST KITCHENAID 40" GAS COOKTOP

REF JENN-AIR 25.02 SIDE-BY-SIDE REFRIDGERATOR

SK SCHOCK STONE DOUBLE BOWL KITCHEN SINK

LEGEND

GENERAL NOTES


RO

DU

CE

D B

Y A

N A

UTO

DE

SK

STU

DE

NT P

RO

DU

CT


RO

DU

CE

D B

Y A

N A

UTO

DE

SK

STU

DE

NT

PR

OD

UC

T

1000

1440

749 450 157 1600 1899

1093

13MM PLASTERBOARD

100X300 MANHATTAN TILE

MR

VN SH

BTTL

172X600MM INSUDTRIEMOSAIC SATIN TILE

1045 90 765

283

VN

BT

SH

2 13MM PLASTERBOARD


172X600MM INSUDTRIEMOSAIC SATIN TILE

SHOWER PANEL1525

901050

3822

893

1007

1381 1600 1899

1

W15

1125

1057

2

W15

SKVN

SH

2

250X250 ECO TILES

5

W15

1606 691 933

1100

9020

01520

180

1000

900 2330

SH

SK

VN

BT

TL

250X250 ECO TILES

1100 90160 1600 160 980

2400

519

1000

MR

VNTL

SH


SHOWER PANEL

172X600 INDUSTRIEMOSAIC TILE

PB

7

W15

8

W15

2180 1461

670273 915 273

1421

2060

1412 1449 2000

2820

SK

DR WM BASE CABINETS

250X250 ECO TILES

780

1821

1000 1000

180 1000 1000 288 2412

180

0811

11 16250X250ECO TILES

PB

PB

3450 90 1315

8079

020

0

1000 1000

DRWM

PB

PARTITION WALL

250X250 ECO TILES

16

1420

Scale Checked by

Drawn by

Date Project number

As indicated

Internal Elevations II

P1.0



Author

HALEN MOKA


1 : 50

Section 91 1 : 50

Section 102

1 : 50

Internal Plan Bathroom3

1 : 50

Internal Plan Ensuite4

1 : 50

Section 135

1 : 50

Internal Plan Laundry6 1 : 50

Section 117 1 : 50

Section 128

BATH LUNA STONE BATH 1680 W. LUNA WHITE HEADREST

BASIN VISTA SAVANNA SEMI-RECESSED BASIN

MIRROR FORME MIRROR MLD 1200

SHOWER HEAD SENNA STAINLESS STEEL WALL FIXED SHOWER HEAD

BATHROOM SINK RUSH STAINLESS STEEL WALL BASIN 3 PEICE OUTLET SETTAPS

BATH SPOUT RUSH WALL MOUNTED STAINLESS STEEL BATH SPOUT 3 PEICE SET

TILES: ECO ALABLASTER GRIGIO LAPPATO BEAUMON TILES (FLOOR)MANHATTAN TAUPE MATTE DECOR 100X300 TILES (WALL)INDUSTRIE MOSAIC SATIN 172X600MM SHEET (STONE FEATURE)

BATHROOM GATEWAY 1200 WALL HUNG VANITY WITH CEASERSTONE TOPVANITY

TOILET LUCCA LOSE COUPLED TOILET SUITE

SHOWER BASE 1050X1520MM LUNA SHOWER BASE W/ REAR WASTE DRAIN

BATHROOM

LAUNDRY

ENSUITE

BASIN CLARK 45L FLUSHLINE STANDARD SINGLE STAINLESS STEEL LAUNDRY BASIN.

SINK TAPS MONDELLA WELS 4 STAR 7L/MIN SIDE LEVER CURVED STAINLESS STEEL BASIN MIXER.

TILES: ECO ALABLASTER GRIGIO LAPPATO BEAUMON TILES

LAUNDRY BEFORD 1000MM WHITE 2 DOOR BASE CABINETCUPBOARDS W/CEASER STONE TOP AND KABOODLE URBAN OAK

MODERN VENEER FINISH X4 BEFORD 1000MM WHITE 2 DOOR WALL UNIT W/ KABOODLE URBAN OAK MODERN VENEER FINISH X2 W/SILVER ANODISED ALUMINIUM 'G' STYLE GRIP HANDLES.

19MM MOISTURE RESISTANT NATURAL WHITE MELAMINEPARTICLE BOARD WITH HIGH GLOSS FINISH.

ENSURE CABINETRY IS FIXED AND LEVELED.

ALL WALL HUNG CABINETS MUST BE FIXED USING THEPROVIDED WALL ANCHORS AND SCREWS TO THE WALL STUDS.

WASHING MACHINE: TO BE SELECTED BY CLIENT

DRYER: TO BE SELECTED BY CLIENT

BATH LUNA STONE BATH 1680 W. LUNA WHITE HEADREST

BASIN VISTA SAVANNA SEMI-RECESSED BASIN

MIRROR FORME MIRROR MLD 1200

SHOWER HEAD SENNA STAINLESS STEEL WALL FIXED SHOWER HEAD

BASIN TAPS RUSH STAINLESS STEEL WALL BASIN 3 PEICE OUTLET SET

BATH SPOUT VIVID FLOOR MOUNTED STAINLESS STEEL BATH SPOUTW/RUSH STAINLESS STEEL WALL MOUNTED TAPS.

TILES: ECO ALABLASTER GRIGIO LAPPATO BEAUMON TILES (FLOOR)MANHATTAN TAUPE MATTE DECOR 100X300 TILES (WALL)INDUSTRIE MOSAIC SATIN 172X600MM SHEET (STONE FEATURE)

BATHROOM GATEWAY 1200 WALL HUNG VANITY WITH CEASERSTONE TOPVANITY W/SILVER ANODISED ALUMINIUM 'G' STYLE GRIP HANDLES.

19MM MOISTURE RESISTANT NATURAL WHITE MELAMINE PARTICLE BOARD WITH HIGH GLOSS FINISH.

ENSURE CABINETRY IS FIXED AND LEVELED TO PREVENT DOORS FROM SWINGING OPEN UNINTENTIONALLY AND TO

CREATE AN EVEN FIX WITH THE COUNTERTOP.

TOILET LUCCA LOSE COUPLED TOILET SUITE

SHOWER BASE 1000X1600MM LUNA SHOWER BASE W/ REAR WASTE DRAIN BUILDER TO INSTALL TO MANUFACTURERES SPECS.

GENERAL NOTES

ALL CUPBOARDS AND VANITIES ARE TO BEASSEMBLED AND INSTALLED INACCORDANCE WITH THEMANUFACTURERS SPECIFICATIONS.

ALL TAPWARE, SHOWERHEADS, TOILETS AND BASINSTO BE INSTALLED BY CERTIFIED PLUMBER.

GLASS SHOWER PANELS ARE TO BE INSTALLED TOMANUFACTURERS SPECIFICATIONS AFTER SHOWERBASE HAS BEEN INSTALLED, WATER-PROOFED ANDTESTED FOR LEAKAGE. SHOWER BASE TO BEINSTALLED TO MANUFACTUERES SPECIFICATIONS.

ALL TILEED AREAD MUST BE WATERPROOFED AND BEFIXED BY A PROFESSIONAL TILER. SEE W13 FORWATERPROOFING OF WET AREAS DETAIL.

SERVICES MUST BE IN PLACE BEFORE INSTALLATION.ENSURE FRAMING IS PLUMB, LEVEL &SQUARE ANDTHAT THE AREA IS WEATHER PROOF. ENSURE THATSTUD SPACING TAKES INTO ACCOUNT THE WIDTH OFPLASTERBOARD SHEETS AND ALLOWS FIXING POINTSAT ITS EDGES. STANDARD CORE 13MM PLASTERBOARDTO BE FIXED ALONG WALLS STUDS AND 15MM FROMSHEET EDGES AND ENDS WITH 30MM 'W' TYPEPLASTERBOARD SCREWS.

CEILING MUST HAVE PEER 16X6000MM 0.38BMTDOMESTIC CEILING BATTEN FCDB-60 @450 CNTRSINSTALLED TO MANUFACTURERES SPECS PRIOR TOFIXING PLASTERBOARD. ALL PLASTERBOARD AND ITSRESPECTIVE INSALLATION MUST COMPLY WITH AS2589-GYPSUM LININGS.

PB 13MM STANDARD CORE PLASTERBOARD

WM WASHING MACHINE

DR DRYER

MR MIRROR

VN VANITY

TL TOILET

BT BATH

LEGEND


RO

DU

CE

D B

Y A

N A

UTO

DE

SK

STU

DE

NT P

RO

DU

CT


RO

DU

CE

D B

Y A

N A

UTO

DE

SK

STU

DE

NT

PR

OD

UC

T

9MM TOUGHENED SAFETY GLASS

13X90 TURPENTINE DECKINGFIXED W/ 50MM SELF DRTILLINGDECKING SCREWS

PREMIUM FLANGED ROUND SPIGOT.150MM CNC-MACHINED FROM 316MARINE GRADE STAINLESS STEELBILLET, W/6MM SOLID PLATEPRESSFITTED AND WELDED. FIXED TOMANUFS SPECIFICATIONS.

90MM GAL STEEL STIRRUP

2X90X45 MGP10 TIMBER DECKING JOISTS

DOOR

CERAMIC TILES CARPET

FLOORING

IN-SITU PERIMETERFLASHING

BRASS OR ALUMINIUM ANGLE

90MM STUD WALL CERAMIC WALL TILES

VILLABOARDLINING

INTERNAL IN-SITU FLASHING

FLEXIBLE WET AREA SEALANT

FLOOR TILES

MORTAR BEDFLOORING

SUITABLE TAPE

FLOOR JOIST

GALVANISED STIRUP IN 20MPACONRETE 60MM STUMP

SLIDING DOOR

TIMBER DECKING 90X13 TURPENTINE FIXED WITH50MM GALV. SELF DRILLING DECKING SCREWSW/10MM GAP BETWEEN DECKING AND BUILDINGTO ALLOW FOR MOVEMENT. CONSTRUCTION ANDFIXING TO COMPLY WITH BAL 12.5.

2X90X45 F8 SEASONED TURPENTINE FIXED WITHM12 GALV. BOLT-NUT-WASHER. W/45X90MM RECESSFOR BEARER.

BEAER 2/90X45 TURPENTINE

100MM 20MPACONCRETE SLAB

3-L11TM MESH REINFORCEMENT

FLOORBOARDS

MIN 15

0

10MM BLUE BOARD SHEETING. TOPFIXED WITH 50MM BATTEN SCREWSAND HELD BEHIND TURPENTINE EDGEDECKING. THE OTHER END MUST BEPARTIALLY EMBEDDED INTO THEGROUND A MINIMUM OF 150MM.

MIN 15

0

ENSURE THAT STUD SPACING TAKES INTOACCOUNT THE WIDTH OF PLASTERBOARDSHEETS AND ALLOWS FIXING POINTS AT ITSEDGES. STANDARD CORE 13MMPLASTERBOARD TO BE FIXED ALONG WALLSSTUDS AND 15MM FROM SHEET EDGES ANDENDS WITH 30MM 'W' TYPE PLASTERBOARDSCREWS. ALL PLASTERBOARD AND ITSRESPECTIVE INSALLATION MUST COMPLYWITH AS2589-GYPSUM LININGS.

R2.7 HIGH PERFORMANCE GOLD BRADFORDINSULATION BATTS1160X580 CUT TO FIT SECURED WITH 13MMSTANDARD CORE PLASTERBOARD.

90X45 MGP10 BOTTOM PLATEFIXED WITH BOLT DYNABOLT 12X100MMHEX NUT EA

2X90X45 MGP10 TOP PLATEFIXED TO TIMBER STUD WALL WITH100X2.8MM BRIGHT 'D' HEADMACHINE DRIVEN NAILS

COLORBOND® STEEL CONFORMING TO AS 1397-G550-AM100 AND AS 2728.COLOUR: MONUMENT 0.42 BMTFASTENERS SHOULD BE SELECTED TO MATCH THEGRADE OF THE ROOFING MATERIAL.SIZE: AS PER ROOF SIZE.SPACING: 1200MMTHE ROOF SHEETING AND ACCESSORIES SHALL BEINSTALLED IN ACCORDANCE WITH MANUFACTURERSPECIFICATIONS.

90MM COLOURBOND LYSAGHTQUAD GUTTER 'MONUMENT'FIXED TO MANUFACTURERES SPECSDN 90 TYPE C METAL DOWNPIPE'MONUMENT' LOW GLOSS FINISH220mm X 140mm METAL RAINWATER HEADFIXED TO CLADDING USINGMANUFACTURERS SPEC

200X38MM TURPENTINE FASCIA BOARDFIXED 100X2.8MM BRIGHT 'D' HEADMACHINE DRIVEN NAILS

CEILING MUST HAVE PEER16X6000MM 0.38BMTDOMESTIC CEILING BATTENFCDB-60 @450 CNTRSINSTALLED TOMANUFACTURERES SPECSPRIOR TO FIXINGPLASTERBOARD. ALLPLASTERBOARD AND ITSRESPECTIVE INSALLATIONMUST COMPLY WITHAS2589-GYPSUM LININGS.

100X25 TURPENTINE CLADDINGINTERGRAIN REDWOOD'NATURAL' STAIN FIXED WITH 50MMGAL CLOUTS END GRAIN TO BE SEALEDAND INTERGRAIN REDWOOD STAINTO BE APPLIED TO CLADDINGAS PER MANUFACTURERES SPECS.

WALL MUST BE SARKED WITH AMETALINSILVERWRAP FOIL INSULATION ANDEXTERNALLY FIXED WITH 6MM CEMENTSHEETING USING 30MM GAL CLOUTS.

50X50 HORIZONTAL BATTENS TO BEFIXED TO VERTICAL BATTENS AT 600CNTRS WITH 65MM BATTEN SCREWS.

600

0.2MM POLYETHELYNE VAPOUR BARRIER400X300 EXTERNAL EDGE BEAMS TOCONTAIN 3-L11TM REINFORCEMENTMESH30MM FROM BOTTOM OF BEAM.

72

90X45 MGP10 NOGGINTWO NOGGINS ARE TO BE PLACED BETWEEN EACHTIMBER STUD. ONE @900MM AND ONE @1800MMUP THE HEIGHT OF THE WALL.FIXED TO TIMBER STUD WALL WITH100X2.8MM BRIGHT 'D' HEAD MACHINE DRIVEN NAILS

200X125MM STEEL RHS INSTALLED AND FIXEDTO ENGINEERS SPECIFICATIONS.

COLORBOND® STEEL CONFORMING TO AS1397-G550-AM100 AND AS 2728.COLOUR: MONUMENT 0.42 BMTFASTENERS SHOULD BE SELECTED TOMATCH THE GRADE OF THE ROOFINGMATERIAL.SIZE: AS PER ROOF SIZE.SPACING: 1200MMTHE ROOF SHEETING AND ACCESSORIESSHALL BE INSTALLED IN ACCORDANCEWITH MANUFACTURER SPECIFICATIONS.

CEILING MUST HAVE PEER 16X6000MM 0.38BMT DOMESTICCEILING BATTEN FCDB-60 @450 CNTRS INSTALLED TOMANUFACTURERES SPECS PRIOR TO FIXINGPLASTERBOARD. ALL PLASTERBOARD AND ITS RESPECTIVEINSALLATION MUST COMPLY WITH AS2589-GYPSUM LININGS.

R2.7 HIGH PERFORMANCE GOLDBRADFORD INSULATION BATTS1160X580 CUT TO FIT SECURED WITH 13MMSTANDARD CORE PLASTERBOARD.ENSURE THAT STUD SPACING

TAKES INTO ACCOUNT THEWIDTH OF PLASTERBOARDSHEETS AND ALLOWS FIXINGPOINTS AT ITS EDGES.STANDARD CORE 13MMPLASTERBOARD TO BE FIXEDALONG WALLS STUDS AND15MM FROM SHEET EDGESAND ENDS WITH 30MM 'W'TYPE PLASTERBOARDSCREWS. ALL PLASTERBOARDAND ITS RESPECTIVEINSALLATION MUST COMPLYWITH AS2589-GYPSUM LININGS.

180X90 MGP10 RAFTER

100X250 GAL NAIL PLATE

152.00°

7.00

°

90.00°

55.00°

13MM STANDARD CORE PLASTERBOARD BULKHEAD

125.00°

83.00°

260

151

151

180X45 MGP10 RAFTERFIXED WITH 100X2.8MMBRIGHT 'D' HEADMACHINE DRIVEN NAILS

CEILING MUST HAVE PEER 16X6000MM0.38BMT DOMESTIC CEILING BATTENFCDB-60 @450 CNTRS INSTALLED TOMANUFACTURERES SPECS PRIOR TOFIXING PLASTERBOARD. ALLPLASTERBOARD AND ITS RESPECTIVEINSALLATION MUST COMPLY WITHAS2589-GYPSUM LININGS.

VELUX DECK SEAL


30-60

35X90 MGP10 ROOF BATTEN

OUTSIDE FRAME WIDTH

VELUX MIDDLE GUTTERWITH VELUX FLASHING

VELUX VS/E VELUX VS/E

R2.7 HIGH PERFORMANCE GOLDBRADFORD INSULATION BATTS1160X580 CUT TO FIT SECUREDWITH 13MM STANDARD COREPLASTERBOARD.

VELUX EKW FLASHING GUTTER

THERMOSEAL SARKING

180X45 MGP10 RAFTERFIXED WITH 100X2.8MM BRIGHT 'D' HEADMACHINE DRIVEN NAILS

CEILING MUST HAVE PEER 16X6000MM 0.38BMTDOMESTIC CEILING BATTEN FCDB-60 @450CNTRS INSTALLED TO MANUFACTURERESSPECS PRIOR TO FIXING PLASTERBOARD. ALLPLASTERBOARD AND ITS RESPECTIVEINSALLATION MUST COMPLY WITH AS2589-GYPSUM LININGS.

VELUX DECK SEAL

COLORBOND® STEEL CONFORMING TO AS 1397-G550-AM100 AND AS2728.COLOUR: MONUMENT 0.42 BMTFASTENERS SHOULD BE SELECTED TO MATCH THE GRADE OF THEROOFING MATERIAL.SIZE: AS PER ROOF SIZE.SPACING: 1200MMTHE ROOF SHEETING AND ACCESSORIES SHALL BE INSTALLED INACCORDANCE WITH MANUFACTURER SPECIFICATIONS.

35X90 MGP10 ROOF BATTEN VELU

X VS/E

R2.7 HIGH PERFORMANCE GOLDBRADFORD INSULATION BATTS1160X580 CUT TO FIT SECUREDWITH 13MM STANDARD COREPLASTERBOARD.

THERMOSEAL WATERPROOFSARKING

100 M

IN

Scale Checked by

Drawn by

Date Project number

As indicated

Details

P1.0



Author

HALEN MOKA


1 : 5

Balustrade detail1

1 : 10

Typical Wet Areas4

1 : 10

Decking Construction3 1 : 10

Brick Veneer Section Detail2

1 : 10

Roof Pitch Change6

1 : 10

Horizontal Skylight Section7

1 : 10

Vertical Skylight section8


RO

DU

CE

D B

Y A

N A

UTO

DE

SK

STU

DE

NT P

RO

DU

CT


RO

DU

CE

D B

Y A

N A

UTO

DE

SK

STU

DE

NT

PR

OD

UC

T

ENSURE THAT STUD SPACING TAKES INTO ACCOUNTTHE WIDTH OF PLASTERBOARD SHEETS ANDALLOWS FIXING POINTS AT ITS EDGES. STANDARDCORE 13MM PLASTERBOARD TO BE FIXED ALONGWALLS STUDS AND 15MM FROM SHEET EDGES ANDENDS WITH 30MM 'W' TYPE PLASTERBOARDSCREWS. ALL PLASTERBOARD AND ITS RESPECTIVEINSALLATION MUST COMPLY WITH AS2589-GYPSUMLININGS.

R2.7 HIGH PERFORMANCE GOLDBRADFORD INSULATION BATTS1160X580 CUT TO FIT SECURED WITH 13MMSTANDARD CORE PLASTERBOARD.


2X90X45 MGP10 TOP PLATEFIXED TO TIMBER STUD WALL WITH100X2.8MM BRIGHT 'D' HEAD MACHINE DRIVEN NAILS


90MM COLOURBOND LYSAGHTQUAD GUTTER 'MONUMENT'FIXED TO MANUFACTURERES SPECSDN 90 TYPE C METAL DOWNPIPE'MONUMENT' LOW GLOSS FINISH220mm X 140mm METAL RAINWATERHEAD FIXED TO CLADDING USINGMANUFACTURERS SPEC

200X38MM TURPENTINE FASCIA BOARDFIXED 100X2.8MM BRIGHT 'D' HEADMACHINE DRIVEN NAILS

CEILING MUST HAVE PEER 16X6000MM 0.38BMT DOMESTICCEILING BATTEN FCDB-60 @450 CNTRS INSTALLED TOMANUFACTURERES SPECS PRIOR TO FIXINGPLASTERBOARD. ALL PLASTERBOARD AND ITS RESPECTIVEINSALLATION MUST COMPLY WITH AS2589-GYPSUM LININGS.

100X25 TURPENTINE CLADDINGINTERGRAIN REDWOOD'NATURAL' STAIN FIXED WITH 50MMGAL CLOUTS END GRAIN TO BE SEALEDAND INTERGRAIN REDWOOD STAINTO BE APPLIED TO CLADDINGAS PER MANUFACTURERES SPECS.

WALL MUST BE SARKED WITH AMETALINSILVERWRAP FOIL INSULATION ANDEXTERNALLY FIXED WITH 6MM CEMENTSHEETING USING 30MM GAL CLOUTS.

50X50 HORIZONTAL BATTENS TO BEFIXED TO VERTICAL BATTENS AT 600CNTRS WITH 65MM BATTEN SCREWS.

200

12

1560

0

0.2MM POLYETHELYNE VAPOUR BARRIER400X300 EXTERNAL EDGE BEAMS TO CONTAIN 3-L11TM REINFORCEMENTMESH 30MM FROM BOTTOMOF BEAM.

0.2MM POLYETHELYNE VAPOUR BARRIER

SL82 SLAB REINFORCEMENTMESH

150MM 25MPA CONCRETE SLAB

250MM BRICK VENEER WALL


250

ENSURE THAT STUD SPACING TAKES INTO ACCOUNTTHE WIDTH OF PLASTERBOARD SHEETS ANDALLOWS FIXING POINTS AT ITS EDGES. STANDARDCORE 13MM PLASTERBOARD TO BE FIXED ALONGWALLS STUDS AND 15MM FROM SHEET EDGES ANDENDS WITH 30MM 'W' TYPE PLASTERBOARDSCREWS. ALL PLASTERBOARD AND ITS RESPECTIVEINSALLATION MUST COMPLY WITH AS2589-GYPSUMLININGS.

300X300 INTERNAL BEAMS TO CONTAIN 3-L11TMREINFORCMENT STEEL 30MM FROM BOTTOM OFBEAM AND @ 6M MAX CTRS.GARAGE SLAB FFL 8864

SAND

FILTERWRAP GEOFABRIC

FREE DRAININGGRANULAR FILL

AGGREGATION PIPE TO BE VINIDEX100MM X 20M SLOTTED DRAINCOILAND INSTALLED BELOW AND BEHINDTHE RETAINING WALL ABOVE GEOFABRIC AND COVERED IN CORSEGRANULAR FILL. GEO FABRIC MUSTBE USED TO SEPERATE THEGRANULAR FILL AND SOIL BEHINDTHE RETAINING WALL.

4X110X220 TREATED PINE SLEEPERSFIXED AT THE TOP AT EACH ENDOF EACH SLEEPER WITH A 65MM BATTENSCREW. A HOLE MUST BE DRILLED THROUGHTHE STEEL COLUMN FIRST.

120MM GALVANISED STEEL 'I'BEAM CHANNEL

EARTH

300X300 20MPACONCRETE FOOTING

20X150 MGP10 TOP TIMBER COVER TO BEFIXED WITH 65MM BATTEN SCREW

0.2 POLYETHYLENE VAPOURBARRIER MUST BE USED TODIRECT WATER BUILDUP TOTHE AGGREGATION PIPE ANDPREVENT WATER FROMTRANSFERRING THROUGH THEWALL

EARTH

Scale Checked by

Drawn by

Date Project number

As indicated

Details II

P1.0



Author

HALEN MOKA


1 : 10

Timber wall Section2

1 : 10

Slab Step down detail3

1 : 10

Retaining wall4


RO

DU

CE

D B

Y A

N A

UTO

DE

SK

STU

DE

NT P

RO

DU

CT


RO

DU

CE

D B

Y A

N A

UTO

DE

SK

STU

DE

NT

PR

OD

UC

T

24 finch st working drawings

Documents