2017 lowest up front cost - emergency exit lights, led...

ECONOMY

2017 Lowest up front cost

Clevertronics has the largest range on the market and continues to be the lowest cost option for all emergency lighting requirements.

Clevertronics is always my choice

PROVEN

LOCAL SUPPORT

Clevertronics has the largest range on the market and continues to be the lowest cost option for all emergency lighting requirements.

LIFELIGHTTM

ELIFE-X-LI 3-4

CLEVERFIT®

EXIT 5-6

BOXLITETM

EXIT7-8

ULTRABLADE® EXIT

9-10

SWINGBLADE® EXIT

11-12

JUMBO EXIT

13-14

WEATHERPROOF EXIT

15-16

CIRCLITE 17-18

SUPALITE 19-20

BATTENS

21-22

WEATHERPROOFBATTENS

23-24

2 0 1 7 E c o n o m y R a n g e

EXPERTLOCAL

SUPPORT

LED LIFELIGHTTM

ELIFE-X-LI

ENERGY EFFICIENT LED - Low 0.4W standby power consumption.

SUPERIOR LIGHT OUTPUT - D40 spacing classification to cover most applications.

LONG LIFE LED - Energy efficient, Long Life LED.

TAMPER RESISTANT - No dome required.

The ELIFE-X-LI a high performance emergency lighting solution, with a D40 classification. With an energy efficient LED lamp and reliable Lithium Iron Phosphate battery. The Lifelight delivers superior light output allowing greater spacing. Retrofitting is easy with an adapter plate to suit older applications in the one box. Tamper resistant with no dome required, the Lifelight is suitable for most emergency lighting applications.

With an impressive D40 spacing classification the LIFELIGHT™ delivers higher levels of compliance.

Based on area of 3350m2 @ 2.7m ceiling height, required quantity to meet AS/NZS2293.

SAVE TIME AND MONEY ON INSTALLATION WITH LIFELIGHT

STANDARD PREMIUMSTANDARD ECONOMY ELIFE-X-LI NOW DELIVERS

www.clevertronics.com.au 3

SPECIFICATION - NON-MAINTAINED EMERGENCY

PART NUMBER Standby Power C0 C90

ELIFE-X-LI(Recessed)

0.4W D40 D40ELIFE-X-LI-SMS

(Surface mount)

AS2293 SPACING TABLE & MOUNTING HEIGHT (m)Classification 2.1 2.4 2.7 3.0 3.3 3.6 4.0 5.0 6.0 7.0 8.0 9.0 10 15

D40 16.7 17.4 18.0 18.6 19.1 19.6 20.1 21.3 22.1 22.7 23.0 23.1 23.1 19.4

SPARE PARTSPART NUMBER Battery Driver/Charger LED module

ELIFE-X-LI1560150 ELIFE-X-LI-CKIT 1100875

ELIFE-X-LI-SMS

95

Dimensions (mm) Without Adaptor Plate

145

Dimensions (mm) With Adaptor Plate

Dimensions (mm)Ballast

51

232 42

Dimensions (mm)SMS

148

60

267

ECONOMYNiCd BATTERY RANGE

4

LED CLEVERFIT® EXIT


ONE BOX SOLUTION - Comes with both single and double sided decals in Running man ‘Pictograph’ and the ‘EXIT’ decal.

EASY INSTALL - Comes with large terminal block & cable entry for easy installation.

LONG LIFE LED - Energy efficient, long life LEDs.

A proven industry leader, the Cleverfit® exit is the only true one box solution on the market.

Current requirements have never been easier to meet. Our industry first, tamper-proof legend cover makes it possible to include all diffuser options of ‘Pictograph’ & ‘EXIT’ in one box for single and double-sided needs. The Cleverfit® is universal mounted with a quick connect bracket for fast ceiling or wall mounting options.

Known for its reliable performance, the Cleverfit® is supplied with long life, energy efficient, high brightness LEDs and a reliable Lithium Iron Phosphate battery.

24 m

AS2293 requirements have never been easier to meet with all diffuser options in one box.

Since 2005 the Australian Standard for emergency lighting has required all new applications and major refurbishments to have the 'pictograph' legend on an exit. It is still best practice to match 'EXIT' for 'EXIT' in a building built prior to this change.

Pick the correct decal

PICK

Slip it in

SLIP

Clip it shut

CLIP

ONE BOX SOLUTION - ALL OPTIONS


SPECIFICATION - MAINTAINED EMERGENCY


ECFLED-LI 1.1W E2 E2

THEATRE VERSION - SUFFIX

PART NUMBER Double sided Decals

ECFLED-LI-TH -DS

-R Pictograph-RL Pictograph left arrow-RR Pictograph right arrow-E EXIT-EL EXIT left arrow-ER EXIT right arrow

AS2293 SPACING TABLE & MOUNTING HEIGHT (m)Classification 2.1 2.4 2.7 3.0 3.3 3.6 4.0 5.0

E2 5.2 5.2 5.4 5.2 5.0 4.6 4.8 -

SPARE PARTSPART NUMBER Battery Driver/Charger LED Strip

ECFLED-LI 1550195 8002880 8002900

215

35580

Dimensions (mm)

Ceiling Mount Wire Guard Part number: 2530110

Dimensions (mm) L x W x H

407 x 190 x 267

Wall Mount Wire Guard Part number: 2530050

Dimensions (mm) L x W x H

415 x 230 x 120


6

LED BOXLITETM EXIT

ENERGY EFFICIENT LED - Low 3W standby power consumption.


EASY INSTALL - Quick connect bracket for fast ceiling or wall mounting. Large terminal block & cable entry for easy installation.


For over 20 years, the Clevertronics Boxlite has provided a quality solution to Contractors requiring a conventional style exit for easy retrofitting. It is now available with the advantage of long lasting LEDs. Boxlite uses a universal body that can be supplied with diffuser combinations for both wall or ceiling mounting. The body uses a quick connect detachable base plate that can be mounted and wired into position, then the gear tray can be installed and secured. All decals combinations for single or double-sided, ‘Pictograph’ or ‘EXIT’ options are available from one box solution.

24 m


Since 2005 the Australian Standard for emergency lighting has required all new applications and major refurbishments to have the ‘pictograph’ legend on an exit. It is still best practice to match ‘EXIT’ for ‘EXIT’ in a building built prior to this change.


PICK

Slip it in

SLIP

Clip it shut

CLIP





EBLLED-WM (Wall)3W

E1.6 E2EBLLED-CM (Ceiling) D5 D5

AS2293 SPACING TABLE & MOUNTING HEIGHT (m)Classification 2.1 2.4 2.7 3.0 3.3 3.6 4.0 5.0 6.0 7.0

D5 7.8 8.0 8.1 8.2 8.2 8.2 8.0 7.3 5.7 1.6E1.6 4.8 4.8 4.8 4.4 4.0 4.2 3.8 - - -E2 5.2 5.2 5.4 5.2 5.0 4.6 4.8 - - -


EBLLED-WM (Wall)1510330 8002281 8002115

EBLLED-CM (Ceiling)

Ceiling Mount Wire Guard Part number: 2530110

Dimensions (mm) L x W x H 407 x 267 x 190

Wall Mount Wire Guard Part number: 2530050

Dimensions (mm) L x W x H 439 x 120 x 225

240

160

375

Dimensions (mm) Ceiling Mount

Dimensions (mm) Wall Mount

160

375 105


8

LED ULTRABLADE® EXIT





Clevertronics has combined a number of key design features and technologies to create the Ultrablade® recessed exit.

The sophisticated look of the Ultrablade® satisfy architectural requirements for a premium recessed exit without sacrificing ease of installation and long service life.

Ultrablade® uses a flat panel diffuser with drop-in decals secured by a tamper proof cover. The one box solution comes with all decal options available in both ‘EXIT’ or ‘Pictograph’ for ease of installation.

Its low profile housing and smart design requires only 110mm of ceiling space for the installation.

24 m




PICK

Slip it in

SLIP

Clip it shut

CLIP





EUBLED 4.5W D5 E3.2


D5 7.8 8.0 8.1 8.2 8.2 8.2 8.0 7.3 5.7 1.6E3.2 6.2 6.2 6.4 6.6 6.6 6.6 6.6 5.8 - -


EUBLED 1510410 8002010 8002175

Dimensions (mm)

Ceiling cutout 430 x 70 (mm)

160

483

110


10

LED SWINGBLADE® EXIT





Clevertronics has combined a number of key design features and technologies to create the Swingblade® surface mount exit.

A universal, blade style exit meets architectural requirements for a premium style exit without sacrificing the ease of installation and long service life.

Swingblade® uses a flat panel diffuser with drop-in decals secured by a tamper proof cover. Our one box solution comes with all diffuser combinations of single and double-sided, ‘EXIT’ or ‘Pictograph’ options for ease of installation. The Swingblade® surface mount exit is available in long life, energy efficient, high brightness LED technology and comes with pulse charged, high temperature Ni-Cd battery.


Since 2005 the Australian Standard for emergency lighting requires all new applications and major refurbishments to have the 'pictograph' legend on an exit. It is still best practice to match 'EXIT' for 'EXIT' in a building built prior to this change.


PICK

Slip it in

SLIP

Clip it shut

CLIP


24 m


LED SWINGBLADE® EXIT



ESBLED 4.5W D5 E3.2


D5 7.8 8.0 8.1 8.2 8.2 8.2 8.0 7.3 5.7 1.6E3.2 6.2 6.2 6.4 6.6 6.6 6.6 6.6 5.8 - -


ESBLED 1510450 8002020 8002185

Dimensions (mm)

263

Dimensions (mm)

230

90

435


12

JUMBO EXIT

40m VIEWING DISTANCE - 250mm high pictograph.


Clevertronics’ Jumbo range caters for applications requiring viewing distances not covered by conventional 24m exits. Switch mode electronics and a dual-rate charge, high temperature Nickel Cadmium battery combination ensure maximum reliability. The standard Jumbo exit uses a 250mm high pictograph for viewing distances up to 40 metres. Featuring robust steel housing with slide in diffusers and back plates for single-sided and double-sided configurations.

www.clevertronics.com.au

40 m

13

SPECIFICATION


EJELED-40 5.3W D5 N/A

Classification 2.1 2.4 2.7 3.0 3.3 3.6 4.0 5.0 6.0 7.0D5 7.8 8.0 8.1 8.2 8.2 8.2 8.0 7.3 5.7 1.6

SPARE PARTSPART NUMBER Battery Driver/Charger

EJE18M-CM 1510420 EJELED-40-CKIT

Dimensions (mm)

320

100630


14

LED WEATHERPROOF EXIT

UNIVERSAL MOUNT, ONE BOX SOLUTION - Wall or ceiling mounted. Also come with both Running man pictograph and the word EXIT decal.

ROBUST DESIGN - IK10 polycarbonate body with wall and ceiling mount for industrial uses where dust and moisture is prevalent.



The Clevertronics weatherproof range provides a cost effective solution of emergency exits for commercial and industrial applications.

The IP66/IP67 ingress protection and IK10 vandal resistant rating is ideal where moisture and/or dust is prevalent or a high level of impact protection is required.

Clevertronics weatherproof exit can be wall or ceiling mounted. It is supplied with long life, energy efficient, high brightness LEDs and a reliable Lithium Iron Phosphate battery.

24 m




PICK

Slip it in

SLIP

Clip it shut

CLIP





EWELED-LI 1.1W E2 E1.6

AS2293 SPACING TABLE & MOUNTING HEIGHT (m)Classification 2.1 2.4 2.7 3.0 3.3 3.6 4.0 5.0

E2 5.2 5.2 5.4 5.2 5.0 4.6 4.8 -E1.6 4.8 4.8 4.8 4.4 4.0 4.2 3.8 -


EWELED-LI 1550195 8002880 8002900

272

410

100


16

LED CIRCLITE

EASY INSTALL - Comes with large terminal block allows for fast installation and maintenance.

ENERGY EFFICIENT LED - 14 to 16W replacing traditional 32W Oyster luminaires.

LONG LIFE LED - Energy efficient, long life 30,000hr LEDs.

The Circlite LED has a superior classification of C0=D32 C90=D32 providing a large 278m² coverage. With an IP44 rating, sturdy polycarbonate construction and opal acrylic diffuser. It is ideal for applications such as corridors and stairwells.

Available with the latest Hawkeye Microwave Motion Sensor, you can save even more energy as the fitting will illuminate only when presence is detected. Capable of the following options: on/off, min/max and never off.

Coupling this state of the art technology with slim 348mm (diameter) x 100mm (depth), robust design the LED Circlite will make the perfect addition to your preferred product portfolio.

HAWKEYE ®

240V and LED Circlite, maintained emergency luminaire with microwave sensor control.

HAWKEYE MICROWAVE MOTION SENSOR

HAWKEYE ®

The integral Hawkeye microwave motion sensor turns off the main light source when no presence is detected, saving energy and money.Capable of the following options: on/off, min/max and never off.

30-150�

DETECTION ANGLE

12-18m (diameter)

DETECTION RANGE

10sec-30min (adjustable)

TIME SETTING


SPECIFICATION - NON EMERGENCY

PART NUMBER Standby Power Lumen Output

FCLLED 14W1340 lm

FCLLED-MS 15W*

SPECIFICATION - EMERGENCY


ECLLED 16WD32 D32

ECLLED-MS 16W**-MS versions Power Consumption figure stated is the maximum value when on (presence detected)

Non-Emergency Circlite LED Surface mounted LED circular, 30,000 hour LED, optional Hawkeye microwave motion sensor control.

Circlite LED - High temperature Nickel Cadmium battery Surface mounted LED circular, 30,000 hour LED, optional Hawkeye microwave motion sensor control, pulse charged high temperature Nickel Cadmium battery pack.


D32 15.4 16.1 16.7 17.2 17.6 18.0 18.5 19.5 20.2 20.6 20.7 20.6 20.3 14.6

SPARE PARTSPART NUMBER Battery

ECLLED1510165

ECLLED-MS

Dimensions (mm)

348 100


18

LED SUPALITE

ENERGY EFFICIENT LED - 2x energy efficient LED. Low 2W standby power consumption.

EASY INSTALL - Comes with flex & plug. Also comes with large terminal block and cable entry hole for hard wired applications.

LONG LIFE LED - Energy efficient, long life, 50,000hr LED in non-maintained mode - NEVER CHANGE THE LAMP AGAIN.

FLEXIBLE MOUNTING OPTIONS - Light weight for easy wall mounting. Adjustable heads to meet installation requirements.

The Clevertronics LED Supalite range provides a cost effective solution to emergency flood applications for commercial and industrial use. The LED Supalite can provide emergency lighting where it is not possible to mount conventional emergency luminaires, e.g. factory/warehouse applications or outside areas such as loading docks, car parks and evacuation assembly points.

The LED Supalite replaces 2x10W and 2x12W traditional halogen flood units, outperforming them with respect to light output and a better distribution. Its pulse charged, high temperature Ni-Cd battery is light weight and makes it easy to wall mount compared to the traditional sealed lead acid battery flood units.

LED SUPALITEAdjustable LED heads

Large terminal block for hard wired applications

Pulse charged, high temperature Ni-Cd battery


SPECIFICATION - NON-MAINTAINED EMERGENCYPART NUMBER Standby Power Max. during first 16 hours charge

EFLLED 2.0W 3.3W

Please note: Emergency flood units cannot be issued with an AS2293.3 spacing table classification because they have movable heads (not fixed). Specifiers note: IES files are available for lighting design calculations and can be downloaded from our website or please contact our office for assistance.

SPARE PARTSPART NUMBER Battery Driver/Charger LED head

EFLLED 1510170 8002080 1100955

Single LED head

0.00

0.50

9.50

10.00m

10.00m0.00

lx

EFLLED wall mounted 3m highHeads tilted down 30° rolled out 30°

137

225

282

63


20

T8 SABRE BATTENS

EASY INSTALL - A modular fitting with large terminal block allows for fast installation and maintenance.

WIDE BODY - To cover junction boxes and provides ample space for heat generating components.

LAMPS INCLUDED - T8 840 Tri Phosphor fluorescent lamp included.

Clevertronics battens feature quality components and a superior finish to provide both good looks and reliability. The product is designed for ease of installation and maintenance.

The Sabre project batten range is available in standard 240V and matching emergency battens. The Sabre batten range has been developed for applications such as basement car parks, warehouses, fire stairs, commercial public spaces and industrial sites. Clevertronics also have a project batten range where customer configuration can be specified and made to order. Emergency battens come standard with variable rate charge high temperature Nickel Cadmium battery pack and surface mount electronics for long service life.


PART NUMBER - NON EMERGENCYBare Diffused Wire guard

1x18W FBS118 FBS118-DIF FBS118-WG2x18W FBS218 FBS218-DIF FBS218-WG1x36W FBS136 FBS136-DIF FBS136-WG2x36W FBS236 FBS236-DIF FBS236-WG

PART NUMBER - MAINTAINED EMERGENCYBare Diffused Wire guard

1x18W EBS118M* EBS118M-DIF* EBS118M-WG*2x18W EBS218M EBS218M-DIF EBS218M-WG1x36W EBS136M* EBS136M-DIF* EBS136M-WG*2x36W EBS236M EBS236M-DIF EBS236M-WG

*For non-maintained battens, replace M to N within relevant part number.

SPECIFICATIONBare Diffused Wire guard

C0 C90 C180 C0 C90 C180 C0 C90 C1801x18W D25 C25 - D25 C20 - D25 C25 -2x18W D25 C25 D25 D25 C20 D12.5 D25 C25 D251x36W D50 D16 - D50 C40 - D50 D16 -2x36W D50 D16 D50 D50 C40 D25 D50 D16 D40


C20 8.9 9.4 9.9 10.3 10.7 11.1 11.5 12.3 12.8 13.0 13.0 12.7 12.0 -C25 9.4 10.0 10.5 11.0 11.5 11.9 12.4 13.4 14.0 14.4 14.6 14.5 14.2 6.6C40 10.6 11.3 12.0 12.6 13.1 13.6 14.3 15.6 16.6 17.4 17.9 18.3 18.5 16.2

D12.5 11.5 11.5 11.8 12.1 12.4 12.5 12.7 13.0 12.8 12.3 11.3 9.9 7.6 -D16 12.1 12.6 13.0 13.3 13.6 13.9 14.1 14.6 14.6 14.4 13.8 12.9 11.5 -D25 14.2 14.7 15.3 15.7 16.1 16.5 16.9 17.7 18.1 18.3 18.2 17.9 17.3 7.7D32 15.4 16.1 16.7 17.2 17.6 18.0 18.5 19.5 20.2 20.6 20.7 20.6 20.3 14.6D40 16.7 17.4 18.0 18.6 19.1 19.6 20.1 21.3 22.1 22.7 23.0 23.1 23.1 19.4D50 18.0 18.7 19.4 20.1 20.7 21.2 21.8 23.2 24.2 24.9 25.4 25.7 25.9 23.7

PRODUCT DIMENSIONS (mm)Body type L W H

1x18W & 2x18WBare 613 112 95

Diffused & Wire guard 630 120 110

1x36W & 2x36WBare 1223 112 95

Diffused & Wire guard 1238 120 110


22

EASY INSTALL - Comes with large terminal block and stainless steel mounting brackets for fast installation and maintenance.

WIDE BODY - To cover junction boxes and provides ample space for heat generating components.

LAMPS INCLUDED - T8 840 Tri Phosphor fluorescent lamp included.

FEATURES

Stainless steel brackets for quick installation, ensuring the luminaire maintains weatherproof rating

Weatherproof grommet or conduit entry

Stainless steel captive & tamper-proof clips

Clevertronics weatherproof battens feature quality components and a superior finish to provide reliability and performance.

It is available in standard 240V and emergency option with high temperature Ni-Cd battery.

Applications include underground car parks, warehouses, stairwells and industrial sites.

T8 WEATHERPROOF BATTENS

23www.clevertronics.com.au

PART NUMBER - NON EMERGENCY1x18W FWB118-P2x18W FWB218-P1x36W FWB136-P2x36W FWB236-P

SPECIFICATION - EMERGENCYECONOMY Non-maintained Maintained C0 C90 C180

1x18W EWB118N-P EWB118M-P* D25 C25 -2x18W - EWB218M-P D25 C25 D201x36W EWB136N-P EWB136M-P D50 C40 -2x36W - EWB236M-P D50 C50 D40

*Only available in wide body


C25 9.4 10.0 10.5 11.0 11.5 11.9 12.4 13.4 14.0 14.4 14.6 14.5 14.2 6.6C40 10.6 11.3 12.0 12.6 13.1 13.6 14.3 15.6 16.6 17.4 17.9 18.3 18.5 16.2C50 11.3 12.0 12.7 13.4 14.0 14.5 15.2 16.7 17.9 18.8 19.6 20.1 20.4 19.6D20 13.1 13.6 14.1 14.5 14.8 15.1 15.5 16.1 16.4 16.3 16.0 15.4 14.5 -D25 14.2 14.7 15.3 15.7 16.1 16.5 16.9 17.7 18.1 18.3 18.2 17.9 17.3 7.7D40 16.7 17.4 18.0 18.6 19.1 19.6 20.1 21.3 22.1 22.7 23.0 23.1 23.1 19.4D50 18.0 18.7 19.4 20.1 20.7 21.2 21.8 23.2 24.2 24.9 25.4 25.7 25.9 23.7

PRODUCT DIMENSIONS (mm)Body type L W H

1x18W Narrow body 655 100 1051x18W & 2x18W Wide body 655 160 105

1x36W Narrow body 1265 100 1051x36W & 2x36W Wide body 1265 160 105

EWB236M-P

L

WH

24


• 40% Extra Battery Life*

• Up to 50% Maintenance cost savings

• More energy efficient

• Environmentally Responsible

• 100,000 Hour LEDs

LPTM

PREMIUMLITHIUM BATTERY RANGE

• Lithium performance at the same price as NiCd & NiMH*

• Lower maintenance costs• Lower energy costs

* Compared to Clevertronics NiCd products

• Australia’s No1 selling Emergency Lighting range• Over 50% maintenance savings vs NiCd• Standard Clevertest Plus

www.clevertronics.com.au

Version 2016-1

VICTORIA195 Chesterville RdMoorabbin VIC 3189Phone: +61 3 9559 2700Fax: +61 3 9559 2799

NEW SOUTH WALES9 Distribution Pl Seven Hills NSW 2147Phone: +61 2 8805 6400 Fax: +61 2 8805 6444

QUEENSLAND2/8-12 Monte-Khoury DrLoganholme QLD 4129Phone: +61 7 3442 9700Fax: +61 7 3442 9777

WESTERN AUSTRALIAUnit 1, 10 Pavers CircleCnr Hod WayMalaga WA 6090Phone: +61 8 9248 3720Fax: +61 8 9248 3725

SOUTH AUSTRALIA U2/19 Main TceRichmond SA 5033Phone: +61 8 8301 8800Fax: +61 8 8351 8286

NEW ZEALANDUnit 22 /761 Great South RoadPenroseAucklandPhone: +64 800 548 448

2017 lowest up front cost - emergency exit lights, led...

Documents