2014 slayer brothers parts catalog

31
Where we cut prices not quality Parts Catalog 2014 Slayer Brothers, LLC Copyright © 2012-2014 All rights reserved. Updated 2/4/14 Slayer Brothers, LLC P.O. Box 75 Moose Lake, MN 55767 [email protected] www.slayerbrothers.com 218-409-9116 888-249-0220 Slayer Brothers Slayer Brothers Catalog 2014-2 This catalog supersedes previous catalogs

Upload: aghost2u4898

Post on 30-Dec-2015

35 views

Category:

Documents


0 download

DESCRIPTION

Part for Cat, CASE, IH, John Deere, Komatsu, etc.

TRANSCRIPT

Where we cut prices not quality

Parts Catalog2014

Slayer Brothers, LLC Copyright © 2012-2014 All rights reserved. Updated 2/4/14

Slayer Brothers, LLCP.O. Box 75

Moose Lake, MN [email protected]

218-409-9116888-249-0220

Slayer BrothersSlayer Brothers

Catalog 2014-2This catalog supersedes previous catalogs

INDEX1. INDEX

Section A. Door & Hatch Hardware3. Handles4. Cab Latches – 15. Cab Latches – 26. Cab Latches - 37. Hinges & Holders8. Miscellaneous

Section B. Wiper Motors, Blades & Hardware10. Wiper Motors11. Wiper Parts & Window Washer Kits12. Wiper Arms13. Wiper Blades14. Manual Windshield Wiper

Section C. Electrical16. Lights & Switches17. Radios & Radio Housings18. HVAC

Section D. Rubber & Vinyl Parts20. Door Molding & Headliner21. Window Molding & Parts

Section E. Helpful Data / Data Guide22-28. Line Drawings29. Wiring Diagrams – Wipers30. About Us - FAQ

TERMSPayment:We accept PayPal, Visa, MasterCard, Discover, COD and company check. Shipping:Parts shipped UPS, USPS and common carrier. Part prices do not include shipping.Returns: No returns without prior authorization. No returns on special order items, sale items or electrical parts.MISCELLANEOUS:Slayer Brothers, LLC is not responsible for nondelivery or delay in delivery due to delays, damages or losses resulting from strikes, riots, fires, floods, or other accidents or occurrences beyond their control. Prices are subject to change without notice. Newest catalog version supersedes all others.DRAWINGS: All drawings and dimensions shown on this website are for reference only.

To order, please contact:218-409-9116 or 888-249-0220

[email protected]

Page 1 Slayer Brothers, LLC Copyright © 2012-2014 All rights reserved. Updated 1/27/14

Page 2 Slayer Brothers, LLC Copyright © 2012-2013 All rights reserved. Updated 7/12/13

Section A Door & Hatch

Hardware

www.slayerbrothers.com

HANDLES

225NL Non-locking exterior door handle. Features a chrome finish, 5/16” shaft and 1 ¾” bolt hole spacing.CASE part number 3113466R91. Same as GD302 handle.

Out of stock

225L Locking exterior door handle. Features a chrome finish, 5/16” shaft, 1 3/4” bolt hole spacing and two keys. CASE part number F93131 and D88771.Same as GD303 handle.

$16.95 each

300ZN Padlock locking exterior door handle. Features a 5/16” shaft and hole for padlock. Zinc finish. Same as 5655ZN handle.

Drawing available in Data Section.

$20.95 each

354-I Inside door handle. Features chrome finish and Allen locking screw. Fits all 5/16”, 44mm or .31 shafts. CASE part number F63925. Same as I8002.

$9.95 each

74-I Inside door handle. Features chrome finish, Allen locking screw and large curved design for better grip when pulling the door shut. Fits all 5/16”, 44mm or .31 shafts. Replaces CASE #E83236.

$16.95 each

200-I Inside handle. Features chrome finish, Allen locking screw and compact design. Small inside handle is perfect for windows, hatches, panels or half-doors. It's 3 1/2” long so a little small for a full-sized door. Fits all 5/16”, 44mm or .31 shafts.

$5.95 each

Page 3 Slayer Brothers, LLC Copyright © 2012-2014 All rights reserved. Updated 2/4/14

CAB LATCHES – Part 1

55-LH Cab Latch. The 55 cab latch is the most common latch used. Case dimensions are roughly 2”x3 3/8”. Zinc finish. Left hand shown. CASE / IH part number is F93204Drawing available in Data Guide section.

$19.95 each

55-RH Cab Latch. The 55 cab latch is the most common latch used. Case dimensions are roughly 2”x3 3/8”. Zinc finish. Right hand shown. CASE / IH part number is F93203Drawing available in Data Guide section.

$19.95 each

58-LH Cab Latch. The 58 cab latch is identical to the 55, except you need an inside handle. This gives the 58 more versatility. It can also be used without an inside handle as a panel latch. Case dimensions are roughly 2”x3 3/8”. Zinc finish. Left hand shown.

$13.95 each

58-RH Cab Latch. The 58 cab latch is identical to the 55, except you need an inside handle. This gives the 58 more versatility. It can also be used without an inside handle as a panel latch. Case dimensions are roughly 2”x3 3/8”. Zinc finish. Right hand shown.

$13.95 each

55A-LH Cab Latch. The 55A cab latch is the larger version of the 55. Case dimensions are roughly 2 3/8”x4 3/8”. Zinc finish. Left hand shown.

Drawing available in Data Guide section.

$31.95 each

55A-RH Cab Latch. The 55A cab latch is the larger version of the 55. Case dimensions are roughly 2 3/8”x4 3/8”. Zinc finish. Right hand shown.

Drawing available in Data Guide section.

$31.95 each

Not sure if you have a Left or Right hand latch? Need exact measurements? Visit our helpful data section at the end of this catalog for more detailed information.

Page 4 Slayer Brothers, LLC Copyright © 2012-2014 All rights reserved. Updated 2/4/14

CAB LATCHES – Part 2

58-CASE Cab Latch. The 58-CASE cab latch replaces Case part number F98122 and F89710. I have also used it to replace CASE part number F93107. Dimensions are roughly 2”x3 3/8”. Zinc finish.

$25.95 each

STR-1 Strike plate. Two position strike plate offers greater safety cab latches and paddle latches. (Not for rotary latches.) Has slotted holes for adjustment.

$ 5.95 each

9015 Paddle Handle Latch. Features a key lock, inside handle with override. Has four mounting holes. Case dimensions are roughly 3 5/8”x4 3/4”. Polished stainless steel.

Drawing available in Data Guide section.

$29.95 each

4901 Paddle Handle Latch. Features a key lock and inside handle. Case dimensions are roughly 3 3/4”x4 3/4”. Unpolished stainless steel. Rubber gasket available.

Drawing available in Data Guide section.

$25.95 each

I-4901 Paddle Handle Latch. Features a key lock and inside override handle. Case dimensions are roughly 4 1/4”x5 1/2”. Zinc finish. Rubber gasket available.

Drawing available in Data Guide section.

$35.95 each

G-4901 Gasket. Rubber gasket to fit the 4901 and the I-4901 paddle handle.

$5.95 each

Not sure if you have a Left or Right hand latch? Need exact measurements? Visit our helpful data section at the end of this catalog for more detailed information.

Page 5 Slayer Brothers, LLC Copyright © 2012-2014 All rights reserved. Updated 2/4/14

CAB LATCHES – Part 3

11442-16LH Rotary Cab Latch. Also sold as 10374-15-30 and CASE R55001. Left hand shown. Complies with FMVSS 206 when tested with approved striker.

Drawing available in Data Guide section.

$44.95 each

11443-16RH Rotary Cab Latch. Also sold as 600518 and CASE R55000. Zinc finish. Right hand shown. Complies with FMVSS 206 when tested with approved striker.

Drawing available in Data Guide section.

$44.95 each

10646-16 Striker bolt. Approved striker bolt for 11442-16LH and 11443-16RH rotary latches.

$11.95 each

Not sure if you have a Left or Right hand latch? Need exact measurements? Visit our helpful data section at the end of this catalog for more detailed information.

Page 6 Slayer Brothers, LLC Copyright © 2012-2014 All rights reserved. Updated 1/27/14

HINGES & HOLDERS

120G 120mm weld-on hinge with grease zerk.

See Data section for mounting options.

$10.95 each

120W Replacement washer. $1.95 each

150G 150mm weld-on hinge with grease zerk.

See Data section for mounting options.

$15.95 each

150W Replacement washer. $ 1.95 each

Other sizes and styles available by special order.

35SS Stainless steel cane bolt. Can be used for left or right side mounting. Perfect for holding doors, panels or windows. Base is 3.5” long.

$21.95 each

5602.5ZN Heavy duty door holder. Spring loaded, all metal door holder with grease zerk. For holding doors open against the side of the cab.

Drawing available in Data Guide section.

$39.95 each

PDH-S Steel door stop/holder. Comes with both pieces and the rubber insert. Silver in color. Has less holding power than the 5602 holder. Similar to factory Case holder.

$10.95 each

RDS-238 Rubber door stop. 2 3/8” long with 3/8” stud. Comes with nut and washer.

$12.95 each

Page 7 Slayer Brothers, LLC Copyright © 2012-2014 All rights reserved. Updated 1/27/14

MISCELLANEOUS

13X5SS Polished stainless steel grab handle. Perfect for cab door or wall post. 1/2” diameter by 13.25” long. Has 4 mounting holes. It's nice!

$19.95

Page 8 Slayer Brothers, LLC Copyright © 2012-2013 All rights reserved. Updated 7/12/13

The unwise man is awake all night

worries over and again.When morning rises he is restless still,

his burden as before.

- The Havamal (Book of Viking Wisdom)

Page 9 Slayer Brothers, LLC Copyright © 2012-2014 All rights reserved. Updated 1/27/14

Section B Wiper Motors, Blades

& Hardware

www.slayerbrothers.com

WIPER MOTORS

WWF Wiper Motors 12 & 24 Volt

Two speed wiper motors with built-in switch. Available in 12 or 24 volt. Adjustable wipe angle. Park to right or left. Uses 1/2” drum arm. Order arms and blades on the next page.

4R1.12 / 12 volt 1” shaft $109.95 each 4R1.24 / 24 volt 1” shaft $115.95 each

Note: 2” and 3” shafts available by special order.

WWJ3 Wiper Motor Kits 12 & 24 Volt

Two speed wiper motor kits. Comes with the motor bracket, connecting link, clips, nuts and screws as shown. Available in 12 or 24 volt. Adjustable wipe angle. Park to right or left. Uses 3/8” arm spline. Order cranks, pivot shafts, arms, blades switches and washer kits on the following pages.

KMB131 / 12 volt kit $ 98.95 KMB132 / 24 volt kit $105.95

Detailed wiper motor information is available in the Data Guide section.

Page 10 Slayer Brothers, LLC Copyright © 2012-2014 All rights reserved. Updated 1/27/14

WIPER PARTS

Parts for WWJ3 Wiper Motors

300795 1.25” Pivot Shaft $ 23.95 each 308-1005 Drive Arm Kit $ 24.95 each

Note: Other shaft lengths and drive arms are available by special order.

200241 Pantograph Adapter $ 12.95 each

1.25” center to center pivot distance

Windshield Washer Parts

400711S Washer Kit / 12 Volt $ 35.95 each 19478 Wet Kit $11.95 each

½ gallon reservoir with pump and screws Converts your dry wiper arm to a wet arm

Detailed wiper motor information is available in the Data Guide section.

Page 11 Slayer Brothers, LLC Copyright © 2012-2014 All rights reserved. Updated 7/12/13

WIPER ARMS

For 1/2” Drum SplinesFits many factory motors plus Wexco, Bosch and AME using the 1/2” drum.

Adjustable radial arm with J-hook end. Length and end section adjusts for a perfect fit. Uses our Universal Wiper Blades.

200717D 14”-18” Radial Arm $ 19.95 each 200718D 20”-24” Radial Arm $ 24.95 each

Adjustable pantograph arm with 13.6mm saddle end. Length adjusts for a perfect fit. Uses our OEM Wiper Blades.

200715D 14”-18” Panto Arm $ 29.95 each 200716D 20”-24” Panto Arm $ 34.95 each

For Double Flat Shaft with 3/8” Tapered SpinesFits bracketed style wiper motors, UT/JE, Bosch, WEX, J3, etc.

201559 16” Radial Dry $25.95 each 201562 22” Radial Dry $28.95

201560 18” Radial Dry $26.95 each 201563 24” Radial Dry $30.95

201561 20” Radial Dry $27.95 each

200461 16” Panto Dry $39.95 each 200464 22” Panto Dry $42.95 each

200462 18” Panto Dry $40.95 each 200465 24” Panto Dry $43.95 each

200463 20” Panto Dry $41.95 each 200467 28” Panto Dry $44.95 eachOther sizes available by special order. Wet kits available.

Page 12 Slayer Brothers, LLC Copyright © 2012-2014 All rights reserved. Updated 7/12/13

WIPER BLADES

Narrow Saddle Mount Blades

Fits .200 and .250 width arms used on many older tractors.

N14 14” Blade $10.95 each N18 18” Blade $12.95 each

N16 16” Blade $11.95 each

Other sizes available by special order

OEM - 13.6 mm Saddle Mount Blades

Fits 13.6mm width arms used as OEM on trucks, buses and newer heavy equipment.

13416 16” Blade $10.95 each 13422 22” Blade $15.95 each

13418 18” Blade $11.95 each 13724 24” Blade $17.95 each

13420 20” Blade $12.95 each 13728 28” Blade $18.95 each

Other sizes available by special order

Universal Mount Blades

Fits a variety of mounts including J-hook.

UNV16 16” Blade $8.95 each UNV24 24” Blade $10.95 each

UNV18 18” Blade $8.95 each UNV26 26” Blade $10.95 each

UNV20 20” Blade $8.95 each UNV28 28” Blade $10.95 each

UNV22 22” Blade $8.95 each

Other sizes available by special order

Washers, wet kits, switches and wiper motors are available

Page 13 Slayer Brothers, LLC Copyright © 2012-2014 All rights reserved. Updated 7/12/13

MANUAL WINDSHIELD WIPER

Manual Wiper with Pantograph ArmIncludes:17” Panto Arm16-18” BladeInside Chrome Handle

$ Call for Price

Replacement Wiper Blade $ Call for Price

Replacement Wiper Blade $ Call for Price

Replacement Wiper Arm $ Call for Price

Replacement Inside Handle $ Call for Price

You asked for it, and here it is. The only pantograph manual wiper in the industry. Designed specifically for use in hazardous environments where electric motor driven wipers aren't allowed, the dual arm wiper provides maximum window coverage with minimal effort.

A Slayer Brothers exclusive and patent pending.

COMING IN THE NEXT CATALOG!

Page 14 Slayer Brothers, LLC Copyright © 2012-2013 All rights reserved. Updated 9/20/13

Bare is his back who has no brother.

- Grettir's Saga

Page 15 Slayer Brothers, LLC Copyright © 2012-2014 All rights reserved. Updated 1/27/14

Section C Electrical

www.slayerbrothers.com

LIGHTS & SWITCHES

S1-12 12 volt 3”x5” 55 watt halogen light. Replaceable H3 bulb. With mounting hardware.

$25.95 each

S1-24 24 volt 3”x5” 70 watt halogen light. Replaceable H3 bulb. With mounting hardware.

$35.95 each

H3-12 12 volt replacement H3 bulb, 55 watt. $ 4.95 each

H3-24 24 volt replacement H3 bulb, 70 watt. $ 6.95 each

311-1 Round wiper switch. For one 12 volt or 24 volt wiper motor. Includes washer position.

Wiring information in Data section.

$19.95 each

311-2 Round wiper switch. For dual 12 volt or 24 volt wiper motors. Includes washer position.

Wiring information in Data section.

$28.95 each

MCR Wiper switch mounting cup. Allows you to install a round wiper switch into the dash with easy access to the wiring plug. One of those things you always needed without knowing it!

$ 6.95 each

SB-P1 Switch Panel. You asked for a low profile roof mounted panel for your switches and here it is. Just order one panel and the switches you need to complete. Comes with internal 12v fuse box.

$ Coming Soon

WP-1 Illuminated wiper switch $ Coming Soon

WS-1 Illuminated washer switch $ Coming Soon

LT-1 Illuminated light switch $ Coming Soon

CB-1 Blank insert to cover any unused openings $ Coming Soon

Page 16 Slayer Brothers, LLC Copyright © 2012-2013 All rights reserved. Updated 7/12/13

RADIOS & HOUSINGS

76 Series Radio Housing. This roof mounted housing comes complete with heavy duty speakers for industrial use. Perfect for tractor, dozer or any heavy equipment cab. Just add your own radio and external antenna. Accepts DIN style radios (without knobs).

$75.95 each

76-25 Roof Mounted Radio - CompleteAM/FM Stereo CD PlayerMP3, USB & SD card ready52W x 4 maximum power output CD-R compatible High-speed audible track search 8x oversampling Anti-shock mechanism 30 station presets (18 FM / 12 AM) Preset scan, one-touch memory 5 selectable EQ curves Two heavy-duty stereo speakers Universal mounting Antenna and hardware included 1/4" headphone jack Dimensions: 21 3/4" x 2 3/4" x 9" (WxHxD)

$275.95 each

SB-P1 Switch Panel. You asked for a low profile roof mounted panel for your switches and here it is. Just order one panel and the switches you need to complete. Comes with internal 12v fuse box. Order switches below.

$ Coming soon

WP-1 Illuminated wiper switch $ Coming soon

WS-1 Illuminated washer switch $ Coming soon

LT-1 Illuminated light switch $ Coming soon

CB-1 Blank insert to cover any unused openings $ Coming soon

Wiring diagram available – Contact us for 24 volt options – Fuse box accepts circuit breakers.

Page 17 Slayer Brothers, LLC Copyright © 2012-2013 All rights reserved. Updated 7/12/13

HVAC

12 volt high quality 7” fan with built-in switch2 speedsAll metal construction.6 amp on low, .9 amp on high

$35.95 each

24 volt high quality 7” fan with built-in switch2 speedsAll metal construction.6 amp on low, .9 amp on high

$48.95 each

120 volt A/C with Heat Pump8,000 BTU cooling capacity / 3,500 BTU supplemental heating capacity

$795.00 eachSpecial order

220 volt A/C with Heat Pump18,500 BTU cooling capacity / 16,000 BTU supplemental heating capacity

$795.00 eachSpecial order

Both units have:3 cooling speeds, 3 fan speeds and 3 heat speeds24-hour on/off timer cools on your scheduleAuto cool mode allows the fan to adjust speeds as the room temperature changesEnergy saver mode conserves energy and saves you moneyFresh air vent and exhaust control removes odors and freshens the airTilt-out antibacterial mesh filter with clean filter alert reduces bacteria and airborne particlesSEASONAL LIMITED AVAILABILITY

Page 18 Slayer Brothers, LLC Copyright © 2012-2014 All rights reserved. Updated 2/4/14

Ill it is when men, with smooth talk, sidestep what is just and good.

- Heitharvega Saga

Page 19 Slayer Brothers, LLC Copyright © 2012-2014 All rights reserved. Updated 1/27/14

Section DRubber & Vinyl Parts

www.slayerbrothers.com

DOOR MOLDING & HEADLINER

ST-5/8 Straight bulb seal with 5/8” diameter bulb. Fits 12-16 gauge panel or lip. This is the most common size of bulb seal used to seal doors and panels requiring a straight seal.

$2.95 per foot

90-5/8 90° bulb seal with 5/8” diameter bulb. Fits 12-16 gauge panel or lip. This is the most common size of bulb seal used to seal doors and panels requiring a 90° seal.

$2.95 per foot

Many other profiles are available upon request! Minimum special order is only 25'.

SS-1B 1” thick sound deadening material. Features a black perforated vinyl face with foam backing. Attaches to cab wall using 3M 90 spray adhesive or with the weld-on studs and push cabs sold below. Comes in 54” width.

$ Call

AL-78 Aluminum domed push-on cap to fit 12 gauge weld-on studs. Bare aluminum finish.

$ .22 each

12GA1 Weld-on stud for 1” thick material. For use with a stud gun. (Other sizes available)

$ .09 each

BL-78 Aluminum domed push-on cap to fit 12 gauge weld-on studs. Black finish. (Special order item)

$ .61 each

Page 20 Slayer Brothers, LLC Copyright © 2012-2014 All rights reserved. Updated 1/27/14

WINDOW MOLDING & PARTS

AS987 Window Rubber. For mounting 1/4” safety glass or polycarbonate into cab skin. Fits skin thickness of 12-16 gauge.

Drawing available in the Helpful Data Section at the end of the catalog.

$2.95 per foot

Many other profiles available upon request!

More window items coming soon!

Page 21 Slayer Brothers, LLC Copyright © 2012-2013 All rights reserved. Updated 7/12/13

Wisdom is welcome wherever it comes from.

- Bandamanna Saga

Page 22 Slayer Brothers, LLC Copyright © 2012-2014 All rights reserved. Updated 1/27/14

Section EHelpful Data

NOTE: All drawings and dimensions shown in this catalogare for reference only.

www.slayerbrothers.com

HELPFUL DATA – Part 1

Page 23 Slayer Brothers, LLC Copyright © 2012-2013 All rights reserved. Updated 7/12/13

HELPFUL DATA – Part 2

What latch do I need? As you approach the door from the outside, if the hinge is on the left, it should take a left hand latch. Always match your hardware to the photos and drawings to make sure

because there are exceptions to every rule!

Page 24 Slayer Brothers, LLC Copyright © 2012-2013 All rights reserved. Updated 7/12/13

HELPFUL DATA - Part 3

Page 25 Slayer Brothers, LLC Copyright © 2012-2014 All rights reserved. Updated 1/27/14

HELPFUL DATA - Part 4

Page 26 Slayer Brothers, LLC Copyright © 2012-2013 All rights reserved. Updated 7/12/13

HELPFUL DATA - Part 5

Page 27 Slayer Brothers, LLC Copyright © 2012-2013 All rights reserved. Updated 7/12/13

HELPFUL DATA - Part 6

Page 28 Slayer Brothers, LLC Copyright © 2012-2013 All rights reserved. Updated 7/12/13

WIRING DIAGRAMS - Wipers

Page 29 Slayer Brothers, LLC Copyright © 2012-2014 All rights reserved. Updated 7/12/13

ABOUT US - FAQ

The parts division of Slayer Brothers, LLC was designed to provide our customers with a wide selection of quality products at very reasonable prices and delivered on time.

More parts arrive!

Our low prices are achieved by ordering parts in very large quantities and paying our suppliers upfront. It's how we do business.

Q. Who can order from Slayer Brothers, LLC?A. We are happy to sell to individuals or businesses and there is no minimum order.

Q. Why do you publish your prices when other companies don't?A. We charge one price to everyone. Prices are posted so you don't have to wait for quotes

or wonder if your competitor is getting a better deal than you are.

Q. What catalog items do you carry in stock?A. If it's in the catalog, it's in stock or will be back in stock soon unless noted.

Q. I need an item but it's not in your catalog, can you help?A. In many cases we can. Call or email with your request.

Q. What options do you offer for shipping?A. We ship by USPS, UPS and common carrier. Flat Rate Priority Mail is currently

the cheapest and fastest option for parts if you can provide a mailing address.

Our office staff will exhaust itself finding you a great deal on parts!

Page 30 Slayer Brothers, LLC Copyright © 2012-2014 All rights reserved. Updated 1/27/14