2013 price list concast

2013PRICE LIST

Table of Contents

Conditions of Sale - Pages 2 & 3Non-Reinforced Concrete Pipe - Page 4Reducers & Increasers - Page 4Reinforced Concrete Pipe, Caps, and Plugs - Page 5Scribed Holes & Knockouts - Page 5Concrete Pipe – Approximate Mass & Dimensions - Page 6Tees & Wyes - Concrete & PVC Connections - Page 7Non-Reinforced Concrete Bends - Page 8Reinforced Concrete Bends - Page 8Elliptical Reinforced Concrete Pipe - Page 9Reinforced Concrete Box Units - Page 10Reinforced Concrete Maintenance Holes - Page 11Flexible Connectors - Page 12Monobox Maintenance Holes - Page 12Reinforced Concrete Catch Basins - Page 12Utility Maintenance Holes & Valve Chambers - Page 13Valve Chamber Chmineys - Page 13Concrete Headwalls for Sewers & Culverts - Page 13Precast Headwalls - Page 13Appurtenances - Page 14Grade Rings - Page 14CON/SPAN Culvert & Small Bridge Replacement System - Pages 15 & 16Maintenance Hole Estimate Sheet - Page 17 & 18Catch Basin Estimate Sheet - Page 19Terms & Conditions - 0

2013 Con Cast Pipe Price List - Page 1

Conditions of Sale

Return Policy

Returned product will not be accepted without a Return Material Authorization (RMA) number. To obtain yourRMA number please contact the Con Cast Pipe (CCP) Shipping Department. CCP requires three (3) business daysnotification prior to any product planned for return. Please ensure that your site personnel have an accurate list ofmaterials to be returned when requesting the RMA number including quantity, size, class, description, and lengthof material for return. If this procedure is followed and the CCP Shipping Department is contacted to obtain yourformal RMA number, the product will be picked up for return to our Guelph or Oakville facilities within three (3)business days. No returns will be accepted or credited without proper authorization within the defined RMA procedureas detailed above.

Any additional items not included on the original RMA will slow the return procedure and possibly result in an additionalre-stocking fee. RMA numbers cannot be extended or re-used. All returns are subject to verification by ConCast Pipe personnel. Discrepancies surrounding the RMA and actual product returned to our facilities will delay thecredit or return process. Please contact your sales representative for further clarification, if required.

Re-Stocking Fees

A 25% handling charge will be deducted from all saleable returns. Any product returned from site that requiresadditional rework or repair will not be credited. Orders for special precast concrete products (i.e. fittings pipe,radius pipe, pipe with holes, scribed/cored manholes, rectangular chambers, box units, specialty precast, etc.) arenot subject to cancellation and any special product not taken or returned from site will be fully invoiced and thencredited, if and when resold, less the applicable restocking charges. CCP reserves the right to not accept returnedproduct that has been delivered to site as per the original sales agreement pending any extraneous circumstances.

Freight and Freight Charges

Prices quoted include the delivery cost for F.O.B. truck at jobsite applicable within a 250 km radius of our Guelphor Oakville facilities. The minimum truckload delivered quantity is 20,000 kg. A delivery less than the minimumtruckload quantity is priced F.O.B. from our plant. CCP reserves the right to charge an additional amount for deliveriesof less than the 20,000 kg minimum truckload quantities, other than the final load to complete a specific order.Contractor will be charged additional fees associated with deliveries requiring the use of the Stake or Straighttrucks that are less than the minimum truckload quantity of 20,000 kg pending any extraneous circumstance(s).

Manufacturer shall not be liable for any delay or non-delivery due to failure of transportation facilities, strikes, war,fire, flood, accident of any other cause beyond its control.

Delivery shall be made as close to the jobsite, designated storage area or line of trench as is practical for loadedtrucks and trailers operating under their own power, without risk of accident, injury or undue delay. The purchasershall provide and maintain suitable access roads to the project site for delivery of product.

Loads that have been released for shipment through CCP’s Shipping Department, that are not cancelled through

...continued on next page


Conditions of Sale

direct contact with our Shipping Department, or have not used the shipping phone line (load cancellation extension)before 5:00am on the specified day of delivery, and arrive on site are the responsibility of the purchaser tooff-load. If a delivered load of product is returned to CCP from site, the purchaser is subject to a $500.00 charge forreturn and handling of such returned materials. Furthermore, if product is delivered to the site and the purchaserdoes not have safe and capable means to off-load product which results in the load being returned to CCP, thepurchaser will be charged a $500.00 fee for return of product to CCP. Please contact your sales representativefor further clarification, if required.

CCP shall be entitled to charge the purchaser for unreasonable delay in unloading or releasing of its delivery vehicles.All deliveries allow for a one (1) hour maximum of delivery vehicle time on site for off-loading. If there is anyadditional time on site, CCP reserves the right to charge the customer for additional time spent on site during offloadingand to hold the release of any subsequent trucks until all trucks are off-loaded and released from site.

Quotations for precast products are based on deliveries being made in normal working hours and subject to loadrestrictions. Weekend or night deliveries will be subject to additional delivery charges.

The purchaser shall give CCP three (3) business days notice of delivery requests.

Unless otherwise specified, all quotations are made on the conditions that full delivery will be taken within six (6)months from acceptance of order. Any product delivered after this period may be subject to increase in price asshown on CCP’s then current price list.Con Cast Pipe reseves the right to invoice a customer for product that has been made specific and special for a project ifit has not been delivered to site within six (6) months from the date of the receipt of the order.

The purchaser will inspect the products at the time of delivery and any claims in respect thereto shall be made atthat time. If any such products are found to be defective, CCP will deliver replacement product to the purchaser atthe site of the work. CCP’s liability for defective products is limited to the replacement of same product at CCP’scost. CCP waives all responsibility of any deficient product not reported immediately after the delivery.

Sales Tax

HST (Harmonized Sales Tax) is EXTRA. All quotations are subject to any increase in sales taxes or freight or to the imposition of new taxes. All new oradditional charges of this kind will be passed along to the Buyer.

Terms – Standard

Net thirty (30) days from the date of the invoice, or, a three (3) percent Prompt Payment Discount, the 25th of themonth following may be applicable providing the account is in good standing and has a payment history to supportsuch an initiative. Taxes are not subject to the Prompt Payment Discount.

There will be a 3% discount for precast orders picked up at our Guelph or Oakville yard. If a transfer is required tohave product picked up at a certain location, the purchaser will be charged for the freight costs of the transferred product.


Non-Reinforced Concrete Pipe

CLASS 2 CLASS 3(Standard Strength) (Extra Strength)

(mm) $ /metre $ /metre150 14.50 14.50200 21.90 21.90250 28.40 28.40

ABOVE PRICES ARE PER METRE

NOTE:1) 150's, 200's and 250's are only sold by the bundle.2) 150mm - 46pcs/bundle 200mm - 33pcs/bundle 250mm - 23pcs/bundle3) Forks available - Please contact our Shipping Department for availability.

Reducers & Increasers

PRICE PER PIECE

1) 150mm to 250mm REDUCER or INCREASER - multiply the price per metre of the larger pipe x 4.5.

2) 300mm to 3000mm reinforced pipe REDUCER or INCREASER - multiply the price per metre of the larger pipe x 6.5.

SIZE

Prices subject to change without notice.Terms and conditions as shown on Page 20. 2013 Con Cast Pipe Price List - Page 4

Reinforced Concrete Pipe, Caps, and Plugs

SIZE UNIT MASS CLASS 50-D CLASS 65-D CLASS 100-D CLASS 140-D Caps and Plugs(mm) (kg/m) $ /metre $ /metre $ /metre $ /metre $ /ea.

300 225 67.90 67.90 67.90 67.90 67.90375 306 83.80 83.80 83.80 83.80 83.80450 381 86.40 86.40 86.40 108.00 108.00525 470 94.20 94.20 110.00 129.90 129.90600 578 135.40 135.40 155.60 183.00 183.00675 691 207.60 207.60 236.40 276.90 276.90750 780 273.70 273.70 312.80 365.70 365.70825 912 317.50 317.50 403.80 424.30 424.30900 1039 380.90 380.90 435.60 508.60 508.60975 1195 417.90 439.90 500.60 585.80 585.80

1050 1277 478.50 502.50 575.50 670.30 670.301200 1561 599.80 630.10 720.90 840.00 840.001350 1939 734.70 771.30 882.40 1,027.70 1,027.701500 2123 898.60 943.10 1,078.20 1,257.90 1,257.901650 2500 1,076.00 1,130.60 1,292.30 1,506.60 1,506.601800 2865 1,300.30 1,367.10 1,560.70 1,821.30 1,821.301950 3324 1,508.00 1,585.00 1,809.20 2,111.90 2,111.902100 3807 1,730.40 1,815.00 2,075.80 2,421.10 2,421.102250 4311 1,966.60 2,065.70 2,360.20 2,753.90 2,753.902400 4869 2,301.70 2,414.80 2,760.20 3,220.50 3,220.502550 5179 2,592.40 2,719.70 3,109.50 3,628.20 3,628.202700 5752 2,877.10 3,020.60 3,452.60 4,028.10 4,028.103000 7043 3,523.20 3,701.20 4,230.00 4,934.70 4,934.70

GASKETS INCLUDED IN PRICEABOVE PRICES ARE PER METRE

NOTE:1) FOR JACKING PIPE - Add an additional 10%.

Scribed Holes & Knockouts

Price Per Hole$ /each

84.80169.20

NOTE:1) For special pipe design, please contact our Sales or Engineering Department for pricing.

MAINLINE PIPE SIZE

1500mm and overUp to 1350 mm


Concrete Pipe

Approximate Mass & Dimensions

INSIDE DIA. OUTSIDE DIA. WALL THICKNESS LAY LENGTHMASS PER

PIECE TRUCKLOAD LOTS(mm) (mm) (mm) (m) (kg) (pcs)*

NON-REINFORCED CONCRETE PIPE150 203.0 26.0 1.00 50 532200 267.0 30.0 1.00 70 357250 320.0 33.0 1.00 100 260

REINFORCED CONCRETE PIPE300 444.5 69.9 2.44 550 74375 533.4 76.2 2.44 746 54450 622.3 82.6 2.44 930 44525 711.2 88.9 2.44 1140 35600 800.1 95.3 2.44 1410 29675 889.0 101.6 2.44 1680 24750 977.9 108.0 2.44 1905 21825 1066.8 114.3 2.44 2225 18900 1155.7 120.7 2.44 2535 16975 1244.6 127.0 2.44 2915 14

1050 1333.5 133.4 2.44 3115 131200 1511.3 146.1 2.44 3810 101350 1689.1 158.8 2.44 4731 81500 1828.8 152.4 2.44 5180 71650 2006.6 165.1 2.44 6101 61800 2184.4 177.8 2.44 6991 51950 2362.2 190.5 2.44 8110 52100 2540.0 203.2 2.44 9290 42250 2717.8 215.9 2.44 10520 32400 2895.6 228.6 2.44 11880 22550 3073.4 241.3 2.44 12637 22700 3251.2 254.0 2.44 14035 23000 3606.8 279.4 2.44 17185 1

NOTES:1) 150's, 200's and 250's are delivered by the bundle.2) 150mm - 46pcs/bundle, 200mm - 33pcs/bundle, 250mm - 23pcs/bundle.3) *SPRING HALF LOAD SEASON WILL AFFECT GROSS WEIGHT.

Price subject to change without notice.Terms and conditions as shown on page 20. 2013 Con Cast Pipe Price List - Page 6

Tees & Wyes: Concrete or PVC Connections

To calculate the price of a TEE or WYE junction, multiply the price per metre of the mainpipe by its length and add the corresponding price for the required branch as listed below.(Price includes rubber gasket)

150-250 300-525 600-825 900-1200 1350-1800 1950-2400 2550-3000 & Boxes(mm) $ /ea $ /ea $ /ea $/ea $/ea $/ea $/ea100 84.20 117.90 123.90 158.00 214.30 256.70 297.30125 84.20 129.60 135.70 173.50 234.90 281.80 325.80150 84.20 142.70 149.90 191.10 259.10 310.50 359.60200 103.30 190.30 199.90 255.00 345.60 414.50 479.40250 118.70 213.30 223.70 285.30 387.00 464.10 536.70300 290.20 411.00 533.30 755.60 978.10 1,333.40375 351.10 470.00 633.00 886.80 1,166.80 1,435.30450 429.10 531.40 696.10 949.80 1,230.00 1,498.20525 463.40 548.00 713.40 967.30 1,247.00 1,515.40600 685.60 854.90 1,108.70 1,388.40 1,657.00675 976.00 1,107.10 1,361.20 1,641.10 1,909.50750 1,260.40 1,374.30 1,628.00 1,908.10 2,176.20825 1,441.80 1,538.10 1,792.10 2,072.10 2,340.50900 1,788.60 2,042.60 2,322.30 2,590.60975 2,036.40 2,269.60 2,549.90 2,818.20

1050 2,313.00 2,523.00 2,802.60 3,071.001200 2,854.30 3,029.20 3,309.40 3,577.701350 3,597.40 3,843.40 4,145.801500 4,344.50 4,589.40 4,857.901650 5,153.40 5,363.30 5,631.501800 6,188.50 6,363.50 6,631.90

NOTES:1) MAINTENANCE HOLE TEE - Calculate the same as above.2) Largest available MAINTENANCE HOLE TEE is 3000mm x 1200mm.3) Smallest available MAINTENANCE HOLE TEE is 1050mm x 1200mm.

BRANCH SIZE

MAIN PIPE SIZE


Non-Reinforced Concrete Bends

ONE-QUARTER (90O) and ONE-EIGHTH (45O) BENDS

CLASS 2 CLASS 3

(Standard Strength) (Extra Strength)(mm) $ /ea $ /ea150 50.40 50.40200 77.40 77.40250 98.70 98.70

Reinforced Concrete Bends

ONE-QUARTER (90O) & ONE-EIGHTH (45O) BENDS, BELOW PRICES ARE PER PIECE

SIZE CLASS 50-D CLASS 65-D CLASS 100-D CLASS 140-D(mm) $ /ea $ /ea $ /ea $ /ea300 366.20 366.20 366.20 366.20 90O

375 453.50 453.50 453.50 453.50 90O

450 467.40 467.40 467.40 583.90 90O

525 509.10 509.10 595.10 701.00 90O

600 690.90 690.90 793.40 933.50 90O

675 1,038.50 1,038.50 1,182.60 1,384.70 90O

750 1,369.00 1,369.00 1,565.00 1,828.40 90O

825 1,587.30 1,587.30 2,018.60 2,121.80 90O

900 1,902.90 1,902.90 2,177.40 2,541.50 90O

975 2,089.60 2,200.60 2,503.40 2,928.20 90O

1050 2,392.80 2,513.40 2,877.10 3,352.00 90O

1200 2,998.30 3,150.20 3,604.30 4,199.90 90O

1350 3,674.70 3,856.40 4,411.90 5,138.40 90O

1500 4,492.20 4,714.30 5,391.00 6,289.30 90O

1650 5,381.10 5,653.40 6,460.80 7,530.90 75O

1800 6,501.30 6,834.70 7,804.00 9,105.80 70O

1950 7,540.80 7,924.80 9,045.50 10,559.60 65O

2100 8,651.80 9,075.60 10,378.60 12,104.40 62O

2250 9,833.20 10,327.40 11,801.00 13,769.90 60O

2400 11,508.60 12,074.20 13,800.10 16,102.10 56O

2550 12,962.10 13,598.30 15,546.60 18,141.40 53O

2700 14,385.80 15,102.70 17,263.10 20,140.00 50O

3000 17,616.10 18,504.80 21,149.80 24,672.70 45O

ABOVE PRICES ARE PER PIECE.

SIZE

MAX. ANGLE


Elliptical Reinforced Concrete Pipe

EQUIV. DIA. RISE x SPAN HE I HE II HE III HE IV MASS(mm) (mm) $ /metre $ /metre $ /metre $ /metre (kg/m)900 735 x 1145 500.60 528.60 586.90 673.40 9311050 865 x 1345 612.90 641.00 723.00 828.70 12141200 965 x 1525 753.10 787.60 884.80 Available Upon Request 14901350 1090 x 1725 945.20 995.10 1,115.90 Available Upon Request 18401500 1220 x 1930 1,126.70 1,185.00 1,333.90 Available Upon Request 21981650 1345 x 2110 1,336.10 1,405.00 1,575.50 Available Upon Request 26001800 1475 x 2310 1,608.00 1,685.60 1,892.50 Available Upon Request 30401950 1600 x 2490 1,847.40 1,944.60 2,180.00 Available Upon Request 35022100 1725 x 2690 2,106.50 2,216.50 2,486.40 Available Upon Request 3993

NOTES:1) Above prices are for mortar joints - for butyl jointing material add 5% to above pricing.2) BENDS - multiply the price per metre of the horizontal elliptical pipe x 5.0.3) REDUCERS & INCREASERS - multiply the price per metre of the larger horizontal elliptical pipe x 6.0.4) PLUGS & CAPS - multiply the price per metre of the HE IV horizontal elliptical pipe x 1.0.5) MAINTENANCE HOLE TEE - multiply the price per metre of the horizontal elliptical pipe x 2.44and add $3,253.60 for the 1200mm riser stub.6) Please allow 3 to 4 weeks delivery.


Reinforced Concrete Box Units - OPSS 1821

SPAN x RISE WALL THICKNESS WATERWAY AREA APPROX. MASS Design Earth Cover OPSS 1821(mm) (mm) (m2) (kg/m) (m) ($ /metre)

1800 x 900 200 1.61 3380 0.6 to 5.5 1,486.601800 x 1200 200 2.16 3690 0.6 to 5.5 1,622.702400 x 1200 200 2.89 4560 0.6 to 3.6 2,070.402400 x 1500 200 3.63 4870 0.6 to 3.6 2,218.102400 x 1800 200 4.38 5170 0.6 to 3.6 2,366.203000 x 1500 250 4.51 6860 0.6 to 3.6 3,239.303000 x 1800 250 5.44 7250 0.6 to 3.6 3,425.103000 x 2100 250 6.37 7630 0.6 to 3.6 3,609.103000 x 2400 250 7.30 8020 0.6 to 3.6 3,792.80

Reinforced Concrete Box Units - CHBDC CAN/CSA S6-06

SPAN x RISE WALL THICKNESS WATERWAY AREA APPROX. MASS Design Earth Cover CHBDC CAN/CSA S6-06(mm) (mm) (m2) (kg/m) (m) ($ /metre)

1800 x 900 200 1.61 3380 0.0 to 0.6 & 5.5 to 8.0 1,870.701800 x 1200 200 2.16 3690 0.0 to 0.6 & 5.5 to 8.0 2,035.102400 x 1200 200 2.89 4560 0.0 to 0.6 & 3.6 to 6.0 2,602.702400 x 1500 200 3.63 4870 0.0 to 0.6 & 3.6 to 5.0 2,810.202400 x 1800 200 4.38 5170 0.0 to 0.6 & 3.6 to 5.0 2,961.403000 x 1500 250 4.51 6860 0.0 to 0.6 & 3.6 to 5.0 3,983.803000 x 1800 250 5.44 7250 0.0 to 0.6 & 3.6 to 5.0 4,150.903000 x 2100 250 6.37 7630 0.0 to 0.6 & 3.6 to 5.0 4,367.303000 x 2400 250 7.30 8020 0.0 to 0.6 & 3.6 to 5.0 4,585.80

NOTES:1) BOX LAY LENGTH - 2.44 m.2) JOINTING MATERIAL - Add 5% to above price per metre.3) DELIVERY - Please contact the Con Cast Pipe Sales Department for delivery dates.4) SPECIALS - Please contact our Sales or Engineering Departments for prices of special design box units.5) REINFORCED CONCRETE BOX UNIT TEE & WYE JUNCTIONS - Box to Box Junction - multiply the price per metre of the larger box unit by 6.0. Box to Pipe Junction - multiply the price per metre of the box unit by 2.5 and add the branch price from page 8.6) REINFORCED CONCRETE BOX UNIT BENDS & ELBOWS - 5.0 x price per metre of the larger box = Total price per piece of BEND or ELBOW.7) REINFORCED CONCRETE BOX UNIT REDUCERS & INCREASERS - 6.0 x price per metre of the larger box = Total price per piece of REDUCER or INCREASER.8) REINFORCED CONCRETE BOX UNIT PLUGS & CAPS - Price per metre of box unit = Total price per piece of PLUG or CAP.9) REINFORCED CONCRETE RADIUS BOX UNIT - 1.15 x price per metre of straight box10) SKEWED END - 1.2 x price per metre of straight box and multiply length of skewed unit.11) FLUSH ENDS - $580.65 per unit.12) STANDARD 15M DOWELS & INSERTS - $65.10 per set.13) SCRIBED HOLES - $169.20 each.14) HOLE TO ACCEPT MAINTENANCE HOLE RISER - $968.00 (includes steps).15) Additional sizes available upon request. Please contact our Sales Department for special box size pricing and depths greater than listed above.


Reinforced Concrete Maintenance Holes

SIZE HEIGHT(mm) (m)1200 taper top c/w steps 1.320 1905 kg/pc 790.50 ea.1200 flat cap 0.305 715 kg/pc 450.30 ea.1200 riser c/w steps 0.305 to 1.829 1324 kg/m 576.00 /m1200 monolithic base c/w steps 0.762 1760 kg/pc 951.60 ea.1200 monolithic base c/w steps 0.914 1960 kg/pc 1,039.10 ea.1200 monolithic base c/w steps 1.067 2160 kg/pc 1,127.20 ea.1200 monolithic base c/w steps 1.372 2550 kg/pc 1,301.70 ea.1200 monolithic base c/w steps 1.524 2750 kg/pc 1,389.30 ea.1200 base slab 0.203 780 kg/pc 450.30 ea.1200 safety grate supplied & installed 1,079.10 ea.1200 prebenching 509.20 ea.1500 flat cap 0.430 1810 kg/pc 897.30 ea.

1500 to 1200 transition c/w steps 0.610 1678 kg/pc 897.30 ea.1500 riser c/w steps 3.05 to 2.438 1927 kg/m 872.90 /m1500 monolithic base c/w steps 1.067 3430 kg/pc 2,093.20 ea.1500 monolithic base c/w steps 1.372 4040 kg/pc 2,359.40 ea.1500 monolithic base c/w steps 1.676 4645 kg/pc 2,624.90 ea.1500 monolithic base c/w steps 1.829 5050 kg/pc 2,758.50 ea.1500 monolithic base c/w steps 1.981 5350 kg/pc 2,891.20 ea.1500 base slab 0.305 1770 kg/pc 897.30 ea.1500 safety grate supplied & installed 1,519.60 ea.1500 prebenching 685.40 ea.1800 flat cap 0.430 2720 kg/pc 1,210.00 ea.

1800 to 1200 transition c/w steps 0.610 2400 kg/pc 1,210.00 ea.1800 riser c/w steps 0.610 to 2.438 2756 kg/m 1,241.20 /m1800 base slab 0.305 2630 kg/pc 1,210.00 ea.1800 safety grate supplied & installed 1,971.80 ea.2400 flat cap 0.430 4980 kg/pc 2,397.80 ea.

2400 to 1200 transition slab c/w steps 0.430 4210 kg/pc 2,397.80 ea.2400 riser c/w steps 0.610 to 2.438 4598 kg/m 2,213.00 /m2400 base slab 0.305 4620 kg/pc 2,397.80 ea.2400 safety grate supplied & installed 3,083.40 ea.3000 flat cap 0.450 7847 kg/pc 4,038.20 ea.

3000 to 1200 transition slab c/w steps 0.450 7258 kg/pc 4,038.20 ea.3000 riser c/w steps 0.610 to 2.438 7043 kg/m 3,462.00 /m3000 base slab 0.305 8225 kg/pc 4,038.20 ea.3000 safety grate supplied & installed3600 flat cap 0.450 10500 kg/pc 7,130.60 ea.

3600 to 1200 transition slab c/w steps 0.450 10500 kg/pc 7,130.60 ea.3600 riser c/w steps 0.610 to 1.829 11042 kg/m 7,545.00 /m3600 base slab 0.305 10500 kg/pc 7,130.60 ea.3600 safety grate supplied & installed

IMPORTANT: 2400mm, 3000mm, and 3600mm MAINTENANCE HOLES TO BE OFF-LOADED BY CONTRACTOR.

NOTES:1) Gaskets included in price.2) Prices on product manufactured to OPSD 700 series and OPSD 1000 series.3) Install outlet pipe in centre of precast outlet opening.4) Standard steps conform to OPSD 405.010. Solid aluminum steps available upon request.

DESCRIPTION APPROX. MASS

PRICE$

on request

on request


Flexible Connectors

Pipe to maintenance hole connectors, supplied and installed.

159 150 C12-2-6 300 158.40203 150 C12-2-8 300 158.40213 200 C12-2-8 300 158.40267 200 C16-2-10 400 158.40267 250 C16-2-10 400 207.10320 250 C16-2-12 400 207.10318 300 C16-2-12 400 207.10445 300 S106-20 500 270.90389 375 S106-20B 500 270.90533 375 S206-24 600 325.40475 450 S206-24A 600 325.40622 450 S206-28 700 411.70622 525 S206-26 660 411.70711 525 S306-32 800 486.10711 600 S206-28L 700 460.60800 600 S306-34L 850 576.30

NOTE:1) Please contact our Sales Department for larger sizes of flexible connectors.

Monobox Maintenance Holes

SIZE PRICE(mm) $ /metre

2400 x 1800 3,332.403000 x 2400 5,343.403900 x 2400 6,334.003900 x 3000 8,161.60

NOTES:1) For Monotransitions including a 1200mm diameter chimney, add $163.50 to the price of the pertinent size of Monocap.2) A minimum charge of 2.0m will apply to all monobox maintenance holes3) Monobox maintenance holes are designed to a maximum depth of 7.0 metres.4) Above prices include the supply of butyl rubber joint sealer.

Reinforced Concrete Catch Basins

SIZE WALL DESCRIPTION HEIGHT APPROX. MASS PRICE(mm) (mm) (m) (kg/m) $ /metre

600 x 600 115 Catch Basin 1.067 to 1.981 940 377.20600 x 600 150 Catch Basin 1.067 to 1.981 1220 509.90600 x 600 150 Ditch Inlet Catch Basin 1.219 to 1.981 1220 509.90600 x 1200 150 Ditch Inlet Catch Basin 1.219 to 1.981 1785 827.80600 x 840 115 Curb Inlet Catch Basin 1.219 to 1.981 1060 596.70600 x 1450 115 Twin Inlet Catch Basin 1.219 to 1.981 1640 732.00

CORE HOLE DIA.(mm) PRICE ($/ea.)OUTSIDE DIA. (mm) CONCRETE

PIPE PVC PIPE PRODUCT LOGIC


Utility Maintenance Holes & Valve Chambers(150mm Wall Thickness Only)

PRICE MASS PRICE MASS PRICE MASS$ /ea (kg/pc) $ /metre (kg/m) $ /ea (kg/pc)

2400 x 1800 1,909.80 3630 2,437.30 3920 2,097.80 36303000 x 1800 3,241.70 4440 3,528.10 4380 3,361.00 44403000 x 2400 3,489.00 5700 3,915.00 4840 3,477.30 5700

IMPORTANT: UTILITY MAINTENANCE HOLE & VALVE CHAMBERS TO BE OFF-LOADED BY CONTRACTOR.

NOTES:1) Standard riser wall thickness is 150mm. Base slabs, flat caps, and transition slabs are 250mm thick.2) Above prices include allowance for two holes in riser walls. Additional holes are $162.80 each.3) RISER HEIGHTS: 1.22 metres to 2.44 metres.4) JOINTING MATERIAL: Included in the above pricing structure.

Valve Chamber Chimney

APPROX. MASS LENGTH PRICE(kg/m) (m) $ /metre

750mm x 1200mm Chimney 1,680 As Required 1,268.80

Concrete Endwalls for Sewers & Culverts

OPS 804.030 "MODIFIED"

PIPE DIA. ENDWALL ONLYENDWALL c/w

GRATE(mm) $ /ea $ /ea300 2,406.30 2,997.90375 2,406.30 2,997.90450 2,925.40 3,576.40525 2,925.40 3,576.40600 3,735.80 4,434.90675 3,735.80 4,434.90750 4,562.50 5,391.00825 4,562.50 5,391.00

Precast HeadwallsOPS 804.040 "MODIFIED" PRICING AVAILABLE UPON REQUEST.

FLAT CAP / TRANSITION SLABS

DESCRIPTION

BASE SLAB RISER

5) Please contact the Con Cast Pipe Sales Department for pricing for Valve Chambers and Utility Maintenance Holes that have wall thickness greater than 150mm.

INTERNAL HORIZONTAL DIMENSION (mm)

Prices subject to change without notice.Terms and conditions as shown on Page 20.


Appurtenances

HEIGHT(mm)

maintenance hole safety steps OPSD 405.010 20.40 easolid aluminum steps OPSD 405.020 29.40 eaoutside rebar steps - supplied & installed 27.40 eamaintenance hole clean out steps - supplied & installed 30.30 eamaintenance hole frames & covers OPSD 401.010 150 180 kg ea 503.20 eacatch basin frames & covers OPSD 400.020 150 225 kg ea 520.90 eaditch inlet catch basin gratings - type "A" (fits 600 x 600 Ditch Inlet CB) 448.90 eaditch inlet catch basin gratings - type "B" (fits 600 x 1200 Ditch Inlet CB) 660.60 eaditch inlet catch basin gratings - type "C" (fits 600 x 1200 Ditch Inlet CB) 725.20 eaditch inlet grate fasteners 115.50 /sethatches cast into flat caps (hatch by others) 462.60 eagoss trap supplied & installed in catch basins 524.90 eagoss trap plug 36.30 eapoint of entry trap 524.90 eapoint of entry trap filter 50.40 eacatch basin inlet control devices (inserts installed only) 102.30 /setmodutape (6.1 metres per roll) 12.20 /rollswift lift lifting eyes (4 tonne capacity) 311.80 easwift lift lifting eyes (8 tonne capacity) 586.70 eaengineering surcharge (non-standard engineering requirements) 509.20 ea

Grade Rings

HEIGHT(mm)

maintenance hole grade ring - 12 per bundle 50 52 kg eamaintenance hole grade ring - 8 per bundle 75 75 kg eamaintenance hole grade ring c/w step - 8 per bundle 75 75 kg eamaintenance hole grade ring 150 215 kg eamaintenance hole grade ring c/w step 300 430 kg eacatch basin grade ring - 12 per bundle 50 36 kg eacatch basin grade ring - 8 per bundle 75 51 kg eacatch basin grade ring - 5 per bundle 125 100 kg eacatch basin grade ring 150 120 kg ea 117.30

33.1035.0052.50

164.20

54.30128.20

34.9036.90


PRICE$


PRICE$ /ea


CON/SPAN Culvert & BridgeReplacement System

SHORT SPAN SERIESSPAN x RISE SPAN x RISE MASS

(m) (ft) (tonnes /metre)3.66 x 1.22 12 x 4 3.13.66 x 1.52 12 x 5 3.43.66 x 1.83 12 x 6 3.73.66 x 2.13 12 x 7 4.03.66 x 2.44 12 x 8 4.33.66 x 2.74 12 x 9 4.63.66 x 3.05 12 x 10 4.94.27 x 1.22 14 x 4 3.54.27 x 1.52 14 x 5 3.84.27 x 1.83 14 x 6 4.14.27 x 2.13 14 x 7 4.44.27 x 2.44 14 x 8 4.74.27 x 2.74 14 x 9 5.04.27 x 3.05 14 x 10 5.3

STANDARD UNIT LAY LENGTH IS 2.44 m; UNIT MASSES ARE APPROXIMATE.

INTERMEDIATE SPAN SERIESSPAN x RISE SPAN x RISE MASS

(m) (ft) (tonnes /metre)4.88 x 1.52 16 x 5 5.34.88 x 1.83 16 x 6 5.74.88 x 2.13 16 x 7 6.14.88 x 2.44 16 x 8 6.54.88 x 2.74 16 x 9 6.96.10 x 1.52 20 x 5 5.76.10 x 1.83 20 x 6 6.16.10 x 2.13 20 x 7 6.56.10 x 2.44 20 x 8 6.96.10 x 2.74 20 x 9 7.36.10 x 3.05 20 x 10 7.77.32 x 1.52 24 x 5 6.37.32 x 1.83 24 x 6 6.77.32 x 2.13 24 x 7 7.17.32 x 2.44 24 x 8 7.57.32 x 2.74 24 x 9 7.97.32 x 3.05 24 x 10 8.3

STANDARD UNIT LAY LENGTH IS 2.44 m; UNIT MASSES ARE APPROXIMATE.



CON/SPAN Culvert & BridgeReplacement System

LONG SPAN SERIESSPAN x RISE SPAN x RISE MASS

(m) (ft) (tonnes /metre)8.54 x 2.44 28 x 8 11.48.54 x 2.74 28 x 9 11.98.54 x 3.05 28 x 10 12.48.54 x 3.35 28 x 11 12.99.76 x 2.44 32 x 8 12.09.76 x 2.74 32 x 9 12.59.76 x 3.05 32 x 10 13.09.76 x 3.35 32 x 11 13.59.76 x 3.66 32 x 12 14.0

10.98 x 2.44 36 x 8 12.510.98 x 2.74 36 x 9 13.010.98 x 3.05 36 x 10 13.510.98 x 3.35 36 x 11 14.010.98 x 3.66 36 x 12 14.510.98 x 3.97 36 x 13 15.0

STANDARD UNIT LAY LENGTH IS 1.68 m OR 1.83 m; UNIT MASSES ARE APPROXIMATE.

SUPER SPAN SERIESSPAN x RISE SPAN x RISE MASS

(m) (ft) (tonnes /metre)12.81 x 2.44 42 x 8 13.712.81 x 2.74 42 x 9 14.212.81 x 3.05 42 x 10 14.812.81 x 3.35 42 x 11 15.312.81 x 3.66 42 x 12 15.814.64 x 3.05 48 x 10 16.214.64 x 3.35 48 x 11 16.814.64 x 3.66 48 x 12 17.414.64 x 3.97 48 x 13 18.0

STANDARD UNIT LAY LENGTH IS 1.68 m OR 1.83 m; UNIT MASSES ARE APPROXIMATE.

NOTES:1) Please contact our CON/SPAN Technical Marketing Representative for budget pricing or to receive a detailed marketing package including our CON/SPAN Engineering Guide.

2) Any technical concerns or unique application considerations should be directed to our CON/SPAN Technical Department at 800-668-PIPE (7473).


Maintenance Hole Estimate Sheet

1200 mm DIAMETER 1500 mm DIAMETERMONOBASE MH MONOBASE MH

PRICE PRICEFROM TO $ /ea FROM TO $ /ea

1.37 1.52 1,577.70 1.37 1.67 2,991.301.53 1.68 1,665.10 1.68 1.99 3,257.501.69 1.85 1,753.20 2.00 2.30 3,522.901.86 2.01 1,840.70 2.31 2.62 3,789.102.02 2.17 1,929.00 2.63 2.93 4,055.302.18 2.33 1,829.50 2.94 3.25 4,321.602.34 2.50 1,917.90 3.26 3.56 4,681.402.51 2.66 2,005.40 3.57 3.88 4,857.002.67 2.82 2,093.40 3.89 4.19 5,032.302.83 2.98 2,181.00 4.20 4.51 5,109.102.99 3.15 2,269.20 4.52 4.82 5,197.203.16 3.31 2,356.60 4.83 4.99 5,284.703.32 3.47 2,444.60 5.00 5.30 6,512.503.48 3.63 2,532.40 5.31 5.62 6,688.103.64 3.80 2,619.90 5.63 5.93 6,863.603.81 3.96 2,707.50 5.94 6.25 7,039.603.97 4.12 2,795.50 6.26 6.56 7,214.504.13 4.28 2,971.20 6.57 6.88 7,390.304.29 4.45 3,058.80 6.89 7.19 7,566.104.46 4.61 3,147.00 7.20 7.51 7,741.604.62 4.77 3,234.60 7.52 7.82 7,916.804.78 4.99 3,322.60 7.83 8.14 8,092.405.00 5.15 4,549.605.16 5.31 4,725.305.32 5.48 4,813.605.49 5.64 4,901.305.65 5.80 4,989.205.81 5.96 5,076.105.97 6.13 5,164.906.14 6.29 5,251.906.30 6.45 5,339.506.46 6.61 5,340.006.62 6.78 5,427.506.79 6.94 5,515.806.95 7.10 5,603.207.11 7.26 5,779.007.27 7.43 5,866.607.44 7.59 5,954.107.60 7.75 6,042.407.76 7.91 6,129.707.92 8.08 6,217.80

DEPTH (m) DEPTH (m)



Maintenance Hole Estimate Sheet

1800 mm DIAMETER 2400 mm DIAMETER 3000 mm DIAMETERBASE SLAB MH BASE SLAB MH BASE SLAB MANHOLE

PRICE PRICE PRICEFROM TO $ /ea FROM TO $ /ea FROM TO $ /ea

1.37 1.67 3,933.20 1.37 1.67 7,493.30 1.37 1.67 12,296.701.68 1.99 4,311.90 1.68 1.99 8,168.40 1.68 1.99 13,352.602.00 2.30 4,690.40 2.00 2.30 8,843.20 2.00 2.30 14,408.402.31 2.62 5,068.80 2.31 2.62 9,518.10 2.31 2.62 15,464.502.63 2.93 5,446.10 2.63 2.93 10,190.80 2.63 2.93 16,516.902.94 3.25 5,825.80 2.94 3.25 10,817.00 2.94 3.25 17,142.903.26 3.56 5,694.90 3.26 3.56 10,992.40 3.26 3.56 17,318.703.57 3.88 5,870.50 3.57 3.88 11,167.10 3.57 3.88 17,406.203.89 4.19 6,045.80 3.89 4.19 11,282.00 3.89 4.19 17,483.104.20 4.51 6,122.60 4.20 4.51 11,332.60 4.20 4.51 17,658.704.52 4.82 6,210.70 4.52 4.82 11,507.30 4.52 4.82 17,834.304.83 4.99 6,385.90 4.83 4.99 11,585.90 4.83 4.99 17,932.305.00 5.30 7,772.20 5.00 5.30 13,068.60 5.00 5.30 19,336.605.31 5.62 7,936.70 5.31 5.62 13,085.10 5.31 5.62 19,352.205.63 5.93 8,112.40 5.63 5.93 13,234.30 5.63 5.93 19,501.005.94 6.25 8,287.50 5.94 6.25 13,409.90 5.94 6.25 19,676.706.26 6.56 8,463.10 6.26 6.56 13,585.10 6.26 6.56 19,851.906.57 6.88 8,638.70 6.57 6.88 13,760.60 6.57 6.88 20,027.506.89 7.19 8,814.60 6.89 7.19 13,936.40 6.89 7.19 20,203.107.20 7.51 8,989.50 7.20 7.51 14,112.20 7.20 7.51 20,379.007.52 7.82 9,165.40 7.52 7.82 14,287.20 7.52 7.82 20,553.907.83 8.14 9,341.00 7.83 8.14 14,463.00 7.83 8.14 20,729.80

NOTES:1) DEPTH REPRESENTS THE DIFFERENCE FROM FINISHED GRADE TO LOWEST INVERT.

2) PRICES SHOWN ARE BASED UPON THE MOST LIKELY COMBINATION OF PIECES FOR EACHDEPTH RANGE - ACTUAL COMBINATIONS AND PRICES MAY VARY.

3) THE FOLLOWING DESIGN CRITERIA HAVE BEEN USED: - 1500mm & 1800mm MAINTENANCE HOLES HAVE 2.13m OF HEADROOM BEFORE TRANSITIONING. - 2400mm & 3000mm MAINTENANCE HOLES HAVE 2.44m OF HEADROOM BEFORE TRANSITIONING. - WHEREVER POSSIBLE, TAPER TOPS (CONES) ARE USED INSTEAD OF FLAT CAPS. - TYPICAL RANGE FOR BRICK & CASTING IS 225-350mm.

4) PRICES INCLUDE: - PRECAST MAINTENANCE HOLE COMPONENTS - GASKETS - 1200 DIA. SAFETY LANDINGS (FOR MAINTENANCE HOLES 5.0m & DEEPER)

5) PRICES DO NOT INCLUDE: - GRADE RINGS (ADJUSTMENT RINGS) - METAL FRAMES & GRATES - PREBENCHING - FLEXIBLE CONNECTORS (BOOTS)

DEPTH (m) DEPTH (m) DEPTH (m)


Catch Basin Estimate Sheet

600 x 600 SINGLE INLET 600 x 600 SINGLE INLET 600 x 1450 TWIN INLET115 WALL THICKNESS 150 WALL THICKNESS 115 WALL THICKNESS

HEIGHT PRICE HEIGHT PRICE HEIGHT PRICE(m) $ /ea (m) $ /ea (m) $ /ea

0.914 344.80 0.914 466.00 0.914 669.001.067 402.50 1.067 544.10 1.067 781.001.219 459.80 1.219 621.60 1.219 892.301.372 517.50 1.372 699.60 1.372 1,004.301.524 574.90 1.524 777.10 1.524 1,115.601.676 632.20 1.676 854.60 1.676 1,226.801.829 689.90 1.829 932.60 1.829 1,338.801.981 747.20 1.981 1,010.10 1.981 1,450.102.134 804.90 2.134 1,088.10 2.134 1,562.102.287 862.70 2.287 1,166.10 2.287 1,674.102.439 920.00 2.439 1,243.60 2.439 1,785.302.592 977.70 2.592 1,321.70 2.592 1,897.302.744 1,035.00 2.744 1,399.20 2.744 2,008.602.897 1,092.70 2.897 1,477.20 2.897 2,120.603.049 1,150.10 3.049 1,554.70 3.049 2,231.903.202 1,207.80 3.202 1,632.70 3.202 2,343.903.354 1,265.10 3.354 1,710.20 3.354 2,455.103.507 1,322.80 3.507 1,788.20 3.507 2,567.103.659 1,380.20 3.659 1,865.70 3.659 2,678.403.812 1,437.90 3.812 1,943.70 3.812 2,790.40

600 x 600 DITCH INLET 600 x 1200 DITCH INLET 600 x 840 CURB INLET150 WALL THICKNESS 150 WALL THICKNESS 115 WALL THICKNESS

HEIGHT PRICE HEIGHT PRICE HEIGHT PRICE(m) $ /ea (m) $ /ea (m) $ /ea

0.914 466.00 0.914 756.60 0.914 545.401.067 543.70 1.067 883.30 1.067 636.701.219 621.60 1.219 1,009.10 1.219 727.401.372 699.60 1.372 1,135.70 1.372 818.701.524 777.10 1.524 1,261.60 1.524 909.401.676 854.60 1.676 1,387.40 1.676 1,000.101.829 932.60 1.829 1,514.00 1.829 1,091.401.981 1,010.10 1.981 1,639.90 1.981 1,182.102.134 1,088.10 2.134 1,766.50 2.134 1,273.402.287 1,166.10 2.287 1,893.20 2.287 1,364.702.439 1,243.60 2.439 2,019.00 2.439 1,455.402.592 1,321.70 2.592 2,145.70 2.592 1,546.602.744 1,399.20 2.744 2,271.50 2.744 1,637.302.897 1,477.20 2.897 2,398.10 2.897 1,728.603.049 1,554.70 3.049 2,524.00 3.049 1,819.303.202 1,632.70 3.202 2,650.60 3.202 1,910.603.354 1,710.20 3.354 2,776.40 3.354 2,001.303.507 1,788.20 3.507 2,903.10 3.507 2,092.603.659 1,865.70 3.659 3,028.90 3.659 2,183.303.812 1,943.70 3.812 3,155.60 3.812 2,274.60

NOTES:1) HEIGHTS INDICATE TOTAL PRECAST HEIGHT INCLUDING MONOLITHIC BASE.2) PRICES DO NOT INCLUDE: ADJUSTMENT RINGS, METAL FRAMES, GRATES & FASTENERS, GOSS TRAPS, & INLET CONTROL HARDWARE.

Prices subject to change without notice. Terms and conditions as shown on . 2013 Con Cast Pipe Price List - Page 19

Terms & Conditions

1. All quotations are open for acceptance by the Purchaser for thirty (30) days from the quotation date, and if notaccepted within that time, will be deemed to be withdrawn.

2. All quotations are subject to any increase in sales tax, freight charges, or any new taxes imposed on thistransaction which are payable by, or collectible by Manufacturer in which case the amount of such increaseswill be added to the final invoice.

3. Acceptance of all quotations shall be conditional upon the Purchaser establishing appropriate credit. Pleaseallow five to ten (5-10) business days for credit to be processed.

4. There are no other warranties, representations, conditions or agreements between Manufacturer and Purchaserother than as set out in this quotation.

5. The Purchaser shall satisfy itself as to the suitability of the Products quoted herein for their intended use, andPurchaser may rely only on such representations as are set out in Manufacturer’s published specifications whichform part of this quotation.

6. Waiver of any one or more of the terms and conditions herein by Manufacturer shall not constitute ageneral waiver of terms and conditions and Manufacturer reserves the right to enforce any and all conditionsnot so waived. Any such waiver must be in writing.

7. Acceptance of this Quotation shall constitute a contract between Manufacturer and Purchaser for the supply ofProducts specified herein in accordance with the terms herein set out.

8. For all product returns, please see Return Policy in Conditions of Sale (reference information on Return MaterialAuthorization - RMA) on page 2 in this price list.


2013

299 Brock Road South R. R. #3Guelph, Ontario N1H 6H9800.668.PIPE

www.concastpipe.com

2013 price list concast

Documents