2013 bulldog gasket ecatalog

North americaPhoNe 800.854.0275FaX 775.851.6518

worldwidePhoNe 775.851.6510

FaX 775.851.6519

About Bulldog iiSummary & Warranty iiiHow To Use This Catalog ivProduct Availability & Coverage vContents Organization viRefillable Bulldog O-Ring Kits viiPrecombustion Chamber Seals viiiCylinder Head Engine Ferrules and Seals ixMachine Application Index xEngine Application Index xxiOver The Road Application Index xxiiiGasket Group Descriptions - Early Engine Series xxivGasket Group Descriptions - Late Engine Series xxvGasket Group Descriptions - Bulldog All In One Kit Program xxviiiGasket Group Descriptions - Early Transmission Series xxxGasket Group Descriptions - Late Transmission Series xxxi

2013 HB Sealing Products, Inc. All Rights Reserved. All trademarks mentioned belong to their respective owners.

This catalog replaces and supersedes all previous Bulldog Gasket catalogs.

Early Vehicular 1Late Vehicular 39Early Non-Vehicular 327Late Non-Vehicular 345Early Over The Road Truck 555Late Over The Road Truck 559 Bulldog All In One Kit Program 1193Early Transmission 1267Late Transmission 1281

TABLE OF CONTENTS

INTRODUCTION

ii



FaX 775.851.6519

ABOUT BULLDOG

BULLDOG HYDRAULICS & GASKETS was originally founded in 1957 and acquired by its current owners in 2001. During its 50+ years of operation, Bulldog Hydraulics & Gaskets has experienced rapid growth and has earned a reputation for excellent product quality, friendly customer service, and distinguished technical support. Bulldog Hydraulics & Gaskets provides hydraulic and gasket products to a broad customer base. Both of these product areas have expanded to include extensive kit building capabilities that service and support several types of industries worldwide. Bulldog Hydraulics & Gaskets stocking representatives are located in most major cities in North and South America, Europe, Africa, Asia, and the Pacific Rim.

Bulldog Hydraulics & Gaskets currently operates a manufacturing, distribution, and administrative office facility located at the South Meadows Business Park in Reno, Nevada.

PRODUCT RANGE

Bulldog Hydraulics & Gaskets stocks and maintains a large inventory of both hydraulic and gasket sealing products. Hydraulic sealing items such as rod seals, rod wipers, rod bearings, piston seals, wear rings, o-rings, back-up rings, and vee-packings are some of the many items that are stocked. Each of these items is designed and/or specified for the critical sealing applications of hydraulic cylinders and other demanding hydraulic sealing applications. Gasket sealing products such as soft gaskets, reinforced gaskets, and sealing products normally replaced along with gaskets (for example, oil seals, o-rings, and other elastomeric products) are also inventoried. Special attention is paid to the proper selection of gasket materials based upon application considerations. Bulldog Hydraulics & Gaskets specializes in materials ranging from basic elastomers to highly advanced elastomeric compounds. This allows us to provide our customers with the most successful solutions to the broadest range of sealing applications.

KIT ASSEMBLY AND CUSTOM PACKAGING

Bulldog Hydraulics & Gaskets maintains facilities specifically designed for the assembly of components into kits and other forms of custom packaging. Extensive capabilities have been developed to support the process of kit manufacturing and assembly. Customer requested kits can be easily documented and integrated into our kit assembly process. Custom packaging capabilities include the ability to apply part numbers to items, bags, and boxes. In addition, items can be boxed or placed on flat sheets (for example, corrugated sheets) for the application of labels and shrink-wrapping. These Bulldog Hydraulics & Gaskets kit and packaging capabilities can offer substantial advantages to customers by providing them with pre assembled kits for service and repair needs. Pre assembled kits, when compared to individual components, can provide overall reductions in total product costs by reducing purchasing, receiving, quality control, and warehousing activities. In addition, pre assembled kits can increase customer serviceability and satisfaction.

TECHNICAL SUPPORT

The technical staff at Bulldog Hydraulics & Gaskets has an in-depth knowledge of the sealing applications for many types of mobile equipment. Some of these applications include hydraulic cylinders and other hydraulic components, diesel engines, and transmissions. Our experience with sealing and gasket products allows us to provide technical support to customers and end users. The ability to provide recommendations based uponBulldog Hydraulics & Gaskets design standards, in addition to analyzing existing designs for potential improvements, are just some of the many advantages our technical staff may offer our customers.

HOURS OF OPERATION

Monday - Friday7:30am - 4:30pm PST An ISO 9001:2008 Registered Company

iii



FaX 775.851.6519

SUMMARY

Bulldog Hydraulics & Gaskets is committed to the development and production of the highest quality gasket kits and sealing components used in the repair of heavy duty, off-road construction, mining and logging equipment.

Our goal is to provide our customers with the finest products, highest availability, and the best customer service in the industry. Bulldog Hydraulics and Gaskets has achieved a worldwide reputation by providing products and services that meet or exceed the expectations of our customers.

Information contained in this catalog is correct to the best of our knowledge at the time of publication. No responsibility, however, can be accepted for any inaccuracies or omissions that may have occurred.

Reproduction of any section of this catalog, in whole or in part, without the express written permission of Bulldog Hydraulics & Gaskets is strictly prohibited.

WARRANTY

WARRANTIES: Seller warrants that it is conveying good title to the products supplied hereunder, free of any security interest or other encumbrance of which Buyer has no knowledge, and that the products supplied hereunder are of merchantable quality, as defined in subparagraphs (a) through (f) of Section 2314 of the Uniform Commercial Code. Seller warrants its products to be free from defects in workmanship and materials.

DISCLAIMER OF WARRANTIES: The warranties specified in the above paragraph are Sellers sole warranties with respect to the products supplied hereunder, and Buyer acknowledges it is relying on no other warranty, either written or oral, concerning such products. SELLER HEREBY SPECIFICALLY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WHICH EXCEEDS THE AFORE STATED WARRANTIES.

REMEDY FOR BREACH OF WARRANTY: If any product supplied hereunder is not as warranted above, Buyer shall return the product to Sellers plant as soon as possible after discovery of the defect, and in any event within 30 days after the date of purchase. If Seller determines that one of its above warranties has been breached, Seller shall replace the product, if a replacement is reasonably available, or refund the purchase price after charging, in either event, for the service rendered by the defective product.

LIMITATION OF LIABILITY: The remedy set forth in the preceding paragraph is the sole and exclusive remedy of Buyer for breach of the above warranties. SELLERS LIABILITY SHALL IN NO EVENT EXCEED THE REPLACEMENT COST OF THE DEFECTIVE PRODUCT AND BUYER WAIVES ANY RIGHT TO CONSEQUENTIAL DAMAGES BEYOND THE REPLACEMENT COST OF THE DEFECTIVE PRODUCT.

INDEMNITY: Buyer shall indemnify and hold Seller harmless from and against all liability and expenses, including attorneys fees, arising out of or attributable to the use of any equipment containing any product supplied hereunder. REPAIRS: The warranties stated herein are void if repairs to the products supplied hereunder are done or attempted by anyone other than Seller, unless Buyer shall first have obtained Sellers written consent of such repairs.

SUMMARY & WARRANTY

iv



FaX 775.851.6519

Vehicular Sections To determine the gasket kit part number you need:

1. The machine model, machine serial number, engine arrangement number and the engine serial number.2. Locate the machine model (refer to The Machine Application Index).3. Match the machine model and serial number to its corresponding engine arrangement number and serial number.4. Determine the type of gasket kit needed based on your requirements.

Non-Vehicular Sections To determine the gasket kit part number you need:

1. The engine model, serial number and arrangement number.2. Locate the engine model (refer to The Engine Application Index). 3. Match the engine model and serial number to its corresponding arrangement number.4. Determine the type of gasket kit needed based on your requirements.

Transmission Sections To determine the gasket kit part number you need:

1. The machine model, machine serial number, transmission arrangement number and the transmission serial number.2. Locate the machine model (refer to The Machine Application Index).3. Match the machine model and serial number to its corresponding transmission arrangement number and serial number.4. Determine the type of gasket kit needed based on your requirements.

EXAMPLE

HOW TO USE THIS CATALOG

vNorth americaPhoNe 800.854.0275FaX 775.851.6518


FaX 775.851.6519

Engine and transmission gaskets, gasket groups, oil seals, crankshaft seals, ferrules and head gaskets for use on Caterpillar engine and transmission applications; back-up rings, O-rings, rod seals, rod wipers, rod and piston packings, rod bushings, wear rings, piston seals, and complete cylinder repair kits for hydraulic cylinder designs used on the following equipment:

CATERPILLAR Agricultural TractorsArticulated TrucksBackhoe LoadersCompactorsCrawler Dozers/RippersCrawler Loaders/RippersExcavators/LoggersFeller BunchersForwardersGradersIntegrated ToolcarriersKnuckle Boom LoadersMine Trucks/Coal HaulersPipelayersScrapersSkiddersStationary & Marine EnginesTree HarvestersWheel DozersWheel Loaders

Additional Coverage forCaterpillar Equipment

Hydraulic Cylinder Lock NutsHydraulic Hose Coupling Seals & KitsHinge Pin SealsO-Rings & O-Ring KitsSpring Pilot SealsSteering Clutch SealsTransmission Thrust WashersVane & Piston Pump ReplacementSeal KitsWater Pump Seals & KitsHydraulic Track Adjuster Seal Kits

KOMATSU Crawler Dozers/RippersCrawler Loaders/RippersExcavatorsGradersScrapersTrucksWheel LoadersHydraulic Track Adjuster Seal Kits

J.I. CASE / DROTTCable LayersCrawler DozersCrawler LoadersExcavators/LoggersFeller BunchersLoader/LandscapersLoader/BackhoesSkiddersUni-LoadersUnimogWheel LoadersMiscellaneous Components & GasketsHydraulic Track Adjuster Seal Kits

JOHN DEERE CompactorsCrawler DozersCrawler LoadersExcavatorsFeller Bunchers / Tree HarvestersGradersLoader BackhoesScrapersSkiddersWheel LoadersHydraulic Track Adjuster Seal Kits

VOLVOCLARK / MICHIGAN / RANGER EULCID / CHAMPIONFeller BunchersGradersRanger SkiddersRear Dumps/Bottom Dumps/Coal HaulersWheel DozersWheel Loaders

DRESSERINTERNATIONAL HARVESTERHOUGH / WABCO HAULPAKCrawler DozersCrawler LoadersEnd Dumps / Coal HaulersExcavatorsScrappersWheel LoadersHydraulic Track Adjuster Seal Kits

KELLY RIPPER HYDRAULIC CYLINDER SEAL KITSCaterpillar, Fiat Allis, International Harvester, Komatsu, Terex

MISCELLANEOUSDynahoe, Fiat Allis, Harricana, Terex, Unit Rig/Lectra Haul

CUSTOM KITSContact:Bulldog Hydraulics & Gaskets

PRODUCT AVAILABILITY & COVERAGE

vi



FaX 775.851.6519

CONTENTS ORGANIzATION

Early VehicularGasket group application information for the early series kits used in repairing off-road construction, mining and logging equipment.

Late VehicularGasket group application information for the late series kits used in repairing off-road construction, mining and logging equipment.

Early Non-Vehicular EnginesEarly series gasket group application information for marine, stationary and other Caterpillar engine applications.

Late Non-Vehicular EnginesLate series gasket group application information for marine, stationary and other Caterpillar engine applications.

Early Over The Road TruckEarly series gasket group application information for Caterpillar over-the-road truck engine applications.

Late Over The Road TruckLate series gasket group application information for Caterpillar over-the-road truck engine applications.

Bulldog All In One Kit ProgramBulldog Hydraulics & Gaskets has redesigned the Bulldog multiple application series kits previously offered. Our new All In One gasket kit program offers you the option of either an Out of Frame Overhaul or an In Frame Overhaul in addition to kits for rebuilding the Cylinder Head(s).

Contact Bulldog if you have any requirements for applications not found or if you have any comments or suggestions.

Early TransmissionEarly series gasket group application information for off-road construction, mining and logging equipment.

Late TransmissionLate series gasket group application information for off-road construction, mining and logging equipment.

vii



FaX 775.851.6519

BULLDOG HYDRAULICS & GASKETS offers a wide range of O-ring and hose coupling seal kits for use on Caterpillar and John Deere off-road equipment. Manufactured from high-quality silicone and nitrile materials, all Bulldog O-rings and seals are designed to provide reliable and consistent sealing performance in heavy-duty off-road applications. Competitively priced, the O-rings are packaged in refillable, durable plastic carrying cases. Applications include drive-trains, hydraulic systems, lubrication systems, engine cooling systems and fuel systems.

REFILLABLE BULLDOG O-RING KITS

BD-959007 227 general purpose silicone O-rings in 53 sizes for high temperature, engine, transmission and hydraulic oil applications.

BD-959008 227 general purpose nitrile O-rings in 53 sizes for use with fuel oil, gasoline and lubricant applications.

BD-959010 142 general purpose silicone O-rings in 23 sizes for high temperature, engine, transmission and hydraulic oil applications.

BD-959011 142 general purpose nitrile O-rings in 23 sizes for use with fuel oil, gasoline and lubricant applications.

BD-959012 227 silicone and nitrile O-rings in 53 sizes for general purpose applications.BD-959013 225 nitrile O-rings and D-rings in 21 sizes for use with XT series and Code 61 flange fittings.BD-959100 243 nitrile O-rings and D-rings in 21 sizes for use with XT series and Code 61 flange fittings.CT-2701528 570 nitrile O-rings in 32 sizes for use with SAE O-ring face seal, SAE straight thread O-ring, and

SAE code 61/62 connections.CT-2701533 149 general purpose silicone O-rings in 32 sizes for use with hose couplings, engines and

transmissions.CT-2701535 80 nitrile D-rings in 9 sizes for use with XT-5 and XT-6 flange connections.CT-2701537 125 nitrile O-rings in 10 sizes for use with metric adapters.CT-2701539 120 nitrile O-rings in 8 sizes for use with face seal hose coupling and adapter fittings.CT-2701545 60 nitrile O-rings in 6 sizes for use with Code 61 and XT-3 hose couplings and flange fittings.CT-4C4782 580 nitrile O-rings in 32 sizes for use with XT-3, O-ring face seal and O-ring boss connections.CT-4C4784 80 nitrile D-rings in 9 sizes for use with XT-5 and XT-6 flange connections.CT-4C4786 85 nitrile O-rings in 7 sizes for use with air conditioning fittings.CT-4C4788 125 nitrile O-rings in 10 sizes for use with metric adapters.CT-4C5859 120 nitrile O-rings in 8 sizes for use with face seal hose coupling and adapter fittings.CT-4C8253 149 general purpose silicone O-rings in 32 sizes for use with hose couplings, engines and

transmissions.CT-9S3135 60 nitrile O-rings in 6 sizes for use with Code 61 and XT-3 hose couplings and flange fittings.JH-AT85197 80 nitrile O-rings in 8 sizes for use with face seal hose coupling and adapter fittings.

viii



FaX 775.851.6519

PRECOMBUSTION CHAMBER SEALS

Application Part NumberD311 CT-4F5607, CT-2H3088D315, D318 CT-4F5607, CT-7F8267, CT-7F8268, CT-2H3088D320 CT-2H3088, CT-5S1105D326 CT-4F5607, CT-2H3088D330, D333, G333 CT-2H3088, CT-5S1108, CT-7S3206D334 CT-3S6538D336 CT-4F5607, CT-3S6538D337 CT-4F5607, CT-2H3088D339 CT-6B7021, CT-4F5607D342, G342 CT-6B7021, CT-4F5607, CT-6L7816D343, G343 CT-4F9653, CT-7S3206D348, G348 CT-2N5749, CT-2S2251D349, G349 CT-2N5749D353, G353 CT-6B7021, CT-4F5607, CT-6L7816D364 CT-6B7021D375 CT-6B7021, CT-4F5607D379, G379 CT-6B7021, CT-6L7816D386 CT-6B7021D397 CT-6B7021, CT-4F5607D398, G398 CT-6B7021, CT-6L7816D399, G399 CT-6L7816D6600, D7700, D8800, D13000, D17000 CT-6B70211670 CT-2H3088, CT-5S11051673 CT-2H3088, CT-7S32061674, 1676 CT-4F56071693 CT-7S32063304 CT-7S3206, 6V15853306 CT-7S32063406, 3408, 3412 CT-2S2251

**Consult your parts book for proper part number identification and application.**

ix



FaX 775.851.6519

CYLINDER HEAD ENGINE FERRULES AND SEALS

Application Ferrule Part No. Seal Part No.General Usage CT-6B6224 CT-6L7813

General Usage CT-7B2420 CT-6L7814

D326, D337 CT-3H5912 CT-3H5887

D342, G342 CT-8S4275HEP

D343, G343, 1693 CT-3H5912 CT-3H5887CT-9S5746 CT-9S5747

D346, D348, G348, D349, G349 CT-8S4275HEP

D353, G353 CT-7N6244CT-8S4275HEP

3304, 3306 CT-9S5746 CT-9S5747CT-7N8018CT-9Y1798HEP

3406, 3408, 3412 CT-3E6772

3508, 3512, 3516 CT-2045426CT-2045427

**Consult your parts book for proper part number identification and application.**

xNorth americaPhoNe 800.854.0275FaX 775.851.6518


FaX 775.851.6519

MACHINE APPLICATION INDEX

Machine Early Late Bulldog Early LateModel Vehicular Vehicular All In One Kits Transmission Transmission

Page Page Page Page PageAgricultural TractorsCH35 40 1194CH45 40 1194CH55 40CH65 41 1194 1282CH65B 41 1194 1282CH65C 41 1194 1282CH65D 1194 1282CH70C 41 1282CH75 42 1282CH75C 42 1282CH75D 1282CH75E 42CH85C 42 1282CH85D 43CH95E 43STEIGER 1194

Crawler Tractors (Dozers)D2 2D3 2 44 1195 1268 1282D3B 44 1195 1282D3C 45 1195 1283D4 2D4B 46 1196 1284D4C 2 46 1196 1284D4D 3 47 1196 1268 1284D4E 50 1196 1284D4H 55 1197 1286D5 5 55 1198 1268 1287D5B 58 1198 1288D5C 62 1198 1289D5E 62 1289D5H 62 1198 1289D5M 64 1290D5N 65D6 6D6B 7D6C 8 65 1199 1269 1290D6D 9 69 1199 1269 1291D6E 74 1199 1293D6G 74D6H 75 1200 1293D6M 79 1296D6N 80D6R 81 1297D7 9D7A 10D7C,D 10D7E 10 103 1269 1300D7F 10 103 1201 1269 1300D7G 11 104 1201 1269 1301D7H 107 1201 1301D7R 109 1303D8 11 112D8D 11 113D8E 11 113D8F 11 113D8G 11 113D8H 12 113 1202 1269 1304D8K 14 115 1202 1270 1304

xi



FaX 775.851.6519



Page Page Page Page PageCrawler Tractors (Dozers)D8L 116 1202 1304D8N 117 1202 1304D8R 118 1202 1305D8T 118 1305D9D 14 119D9E 14 119 1270D9G 14 119 1203 1270 1305D9H 15 122 1203 1271 1306D9L 125 1203 1306D9N 125 1203 1306D9R 125 1203 1306D9T 126 1306D10 127 1306D10N 127 1204 1307D10R 127 1204 1307D10T 127 1307D11N 128 1204 1307D11R 128 1204 1307D11T 128 1308

Motor Graders12 1612E 1712F 17 129 1205 1271 130812G 17 129 1205 1271 130812H 133 1205 130812HES 133 1205 130812HNA 134 1205 130814B 1714C 1814D 1814E 18 135 1205 1271 130914G 18 135 1205 1271 130914H 136 1205 130914HNA 136 130916 18 137 1271 130916G 137 1205 1271 130916H 130916HNA 138 1205 130916M 13824H 138 1309112 18112E 18112F 19 138 1206 1271 1309120 19 139 1206 1271 1309120B 139 1206 1309120G 19 140 1206 1272 1309120H 142 1206 1310120HES 142 1206 1311120HNA 142 1206 1311130G 19 143 1207 1272 1311135H 144 1207 1311135HNA 144 1207 1311140 19 145 1207 1272 1312140B 145 1312140G 19 145 1207 1272 1312140H 148 1207 1312140HES 149 1207 1313140HNA 149 1207 1313143H 150 1313143HNA 150 1208 1313160G 151 1208 1313

xii



FaX 775.851.6519



Page Page Page Page PageMotor Graders160H 151 1208 1313160HES 152 1208 1314160HNA 152 1208 1314160M 153163H 153 1314163HNA 153 1208 1314212 20

Excavators & Loggers205B 154 1209206B 154 1209211B 154 1209212B 154 1209213B 154 1209214B 154 1209214BFT 154 1209215 20 154 1210215B 155 1210215C 156 1210215D 156 1210219 156 1210219D 156 1210224B 156 1210225 20 156 1211225B 157 1211225D 157 1211225DLC 157 1211227 157 1211229 157 1211229D 158 1211231D 158 1211235 20 158 1212235B 161 1212235C 161 1212235D 162 1212245 20 162 1212245B 163 1212245D 164 1212M318 164320 165 1213320B 165320BL 165320BN 165320BS 166320L 166 1213320N 166 1213320S 166 1213322 166 1213322B 166 1213322BL 166 1213322BLN 167322L 167 1213322LN 167 1213322N 167 1213325 167 1214325B 169 1214325BL 169 1214325BLN 170M325B 170325L 170 1214325LN 172 1214330 172 1214330B 173

xiii



FaX 775.851.6519



Page Page Page Page PageExcavators & Loggers330BL 173 1214330BLN 174330D 174330L 176 1214330LN 177 1214336D 177345B 177345BL 180345C 181W345C 183350 183 1215350L 183 1215375 184 1215375L 184 12155080 185 12155110 1865130 186 12155130B 186 12155230 186E110B 187 1216E120B 187 1216E180 187 1216EL180 1216E200B 187 1216EL200B 187 1216E240 187 1216EL240 1216E240B 187 1216EL240B 187 1216E240C 188 1216EL240C 188 1216E300 188 1217E300B 1217EL300 1217EL300B 188 1217

Backhoe Loaders446 189 1218446B 189 1218 1314446D 1218

Skidders508 190 1219FB508 190515 190 1219 1314517 190 1314518 20 190 1219 1272 1314518C 192 1219 1315FB518 193 1315520 193525 193 1219 1315525B 193 1219 1316527 193 1316528 21 194 1220 1272 1316528B 195 1316530B 195 1220 1316535B 1316535C 1316545 195 1317545C 1317D4H 195 1317D5H 196 1220 1317

xiv



FaX 775.851.6519



Page Page Page Page PagePipelayers561B 21561C 21 197 1221 1272 1317561D 197 1221 1317561H 197 1317561M 197 1317571A 21 197 1272 1317571F 21 198 1221 1272 1317571G 21 198 1221 1272 1317572C,D 21572E 22 199 1272 1318572F 22 199 1221 1272 1318572G 22 199 1221 1272 1318572R 200 1318578 200 1221 1318583C 22 201583E 22583H 22 201 1272 1318583K 23 201 1272 1318583R 202 1319589 202 1221 1319594 23 202 1272 1319594H 23 203 1273 1319

Wheel Tractors & Scrapers611 1319613 205 1273 1319613B 205 1222 1273 1319613C 205 1222 1273 1319615 205 1222 1319615C 206 1222 1319619B 23619C 23621 23 206 1273 1319621B 207 1222 1273 1320621E 207 1222 1320621F 208 1222 1320621G 1222 1320621R 208 1320621S 208 1320623 23 208 1273 1321623B 209 1223 1273 1321623E 209 1223 1321623F 210 1223 1321623G 1223 1321627 23 210 1223 1273 1321627B 24 211 1223 1273 1321627E 214 1224 1322627F 214 1224 1323627G 215 1323630A 24 215 1273630B 24 215 1273631A 24 215631B 24 216 1273 1323631C 25 216 1274 1323631D 25 216 1225 1274 1323631E 217 1225 1323631G 1324632 217 1274633 25 217633C 25 217 1274 1324633D 218 1225 1274 1324633E 218 1225 1324

xv



FaX 775.851.6519



Page Page Page Page PageWheel Tractors & Scrapers637 25 218 1226 1274 1324637B 26 220 1226 1274637D 26 220 1226 1274 1324637E 224 1226 1325637EII 225637G 1326639D 226 1227 1326641 26 226 1274641B 26 227 1274 1327650 26 227 1274650B 227 1327651 26 227 1275651B 26 228 1275 1327651E 228 1227 1327657 27 228 1275657B 27 229 1275 1327657E 229 1227 1327657G 230660 27 231 1275660B 27 231 1275 1328666 27 231 1275666B 28 231 1275 1328DW10 28DW15 28DW15C 28DW15E 28DW20 28DW20E 28DW20F 28DW21 29DW21C 29DW21D 29

Mine Trucks69D 232 1328725 1328730 1329735 232 1329740 232 1329768B 29 1276 1329768C 232 1228 1329769 29 1276 1329769B 29 1276 1329769C 232 1228 1329769D 233 1228 1329771C 233 1228 1329771D 233 1228 1330772 29 1276 1330772B 234 1228 1330773 29 1276 1330773B 234 1228 1330773D 234 1228 1330773E 1330773F 235 1330775B 235 1228 1330775D 235 1228 1330775E 1330775F 236 1330776 30 236 1276 1331776B 236 1229 1331776C 238 1229 1331776D 238 1229 1331

xvi



FaX 775.851.6519



Page Page Page Page PageMine Trucks777 30 239 1276 1331777B 239 1229 1331777C 241 1229 1331777D 241 1229 1331777F 242 1332784B 242 1229 1332784C 1332785 243 1229 1332785B 243 1229 1332785C 244 1229 1332789 245 1229 1332789B 245 1229 1332789C 246 1332793 246 1230 1332793B 246 1230 1332793C 247 1230 1332793D 247797 1333797B 247 1333D20D 247 1230 1333D25C 247 1230 1333D25D 248 1230 1333D30C 248 1230 1333D30D 248 1230 1333D35C 248 1230 1333D35HP 248 1230 1333D40D 249 1230 1333D44 1333D250B 249 1231 1333D250D 250 1231 1334D250E 250 1231 1334D300B 250 1231 1334D300D 250 1231 1334D300E 250 1231 1334D350C 251 1231 1334D350D 251 1231 1335D350E 251 1231 1335D400 251 1335D400D 252 1231 1335D400E 253 1231 1335D550 1335D550B 1335

Compactors & Wheel Dozers814 30 254 1232 1276 1336814B 255 1232 1336814F 255 1232 1336815 30 256 1232 1276 1336815B 257 1232 1336815F 257 1232 1336816 30 257 1232 1276 1337816B 258 1232 1337816F 258 1232 1337824 31 1276824B 31 1276 1337824C 258 1232 1337824G 259 1232 1337825B 31 1277 1337825C 259 1232 1337825G 259 1232 1338826B 31 1277 1338826C 259 1232 1338

xvii



FaX 775.851.6519



Page Page Page Page PageCompactors & Wheel Dozers826G 260 1232 1338834 31 1277 1338834B 260 1233 1338834G 260 1339834H 1339835 31 1277 1339836 260 1233 1339836G 1339836H 1339844 261 1233 1339844H 261 1339854G 261 1233 1339CB434 261 1233CB614 262CB634 262CB634C 262CP533 262CP533C 262CP553 262CP563 262CP563C 263CS531 263CS531C 263CS533 263CS533C 264CS563 264CS563C 264CS573 264CS573C 265CS583 265CS583C 265

Integrated ToolcarriersIT12 266 1234 1339IT12B 266 1234 1339IT12F 266 1234 1340IT14B 266 1234 1340IT14F 266 1234 1340IT18 266 1234 1340IT18B 267 1234 1340IT18F 267 1234 1340IT24F 267 1234 1340IT28 267 1234 1341IT28B 268 1234 1341IT28F 268 1234 1341IT28G 268 1341IT38F 269 1234 1341IT38G 269 1341IT62G 1341

Wheel Loaders6 31910 31 271 1235 1277 1342910E 271 1235 1342910F 1235 1342G910 271 1235 1342916 271 1235 1342G916 271 1235 1343918F 271 1235 1343920 31 272 1235 1277 1343922A 32 1277922B 32 1277

xviii



FaX 775.851.6519



Page Page Page Page PageWheel Loaders924F 273 1235 1343924G 1343926 273 1236 1344926E 274 1236 1344G926 274 1236 1344928F 274 1236 1344928G 275 1236 1344930 32 275 1236 1277 1345930R 276 1345930T 277 1345936 277 1236 1345936E 277 1236 1345936F 278 1236 1346G936 278 1236 1346938F 278 1236 1346938G 279 1236 1346944 32 1277944A 32 1278950 32 280 1237 1278 1347950B 281 1237 1348950E 282 1237 1348950F 282 1237 1349950G 284 1237 1349950H 284 1351960F 285 1237 1351962G 286 1237 1351966A 33 1278966B 33 1278966C 33 286 1238 1278 1352966D 289 1238 1353966E 290 1238 1353966F 291 1238 1354966G 293 1355966H 295 1356966R 295 1356970F 296 1238 1356972G 297 1357980 34 297 1278 1358980B 34 297 1239 1278 1358980C 297 1239 1358980F 298 1239 1358980FII 299 1359980G 299 1239 1359980GII 1359980H 300 1359988 34 1278 1360988B 34 301 1240 1278 1360988F 301 1240 1360988FII 301 1360988G 1360990 302 1240 1361990II 302 1361990H 302 1361992 34 302 1278 1361992B 302 1278 1361992C 302 1240 1361992D 303 1240 1361992G 303 1240 1361993K 303 1361994 304 1240 1362994D 1240 1362R1300 304

xix



FaX 775.851.6519



Page Page Page Page PageCrawler Loaders931 34 305 1241 1278 1362931B 305 1241 1362931C 306 1241 1363933 1363933A 1363933C,E 34933F,G 34935B 307 1241 1363935C 307 1241 1363939 1363941 35 307 1241 1279 1364941B 35 308 1241 1279 1364943 308 1242 1364951 35 1279951B 35 309 1242 1279 1364951C 36 309 1242 1279 1364953 310 1242 1364953B 311 1242953C 311 1242955 36955C,E 36955F 36955H 36 1279955K 37 311 1242 1279 1365955L 37 312 1242 1279 1365963 313 1243 1365963B 314 1243963C 314973 314 1243 1366977D,E 37977H 37 1279977K 37 315 1243 1279 1366977L 37 315 1243 1279 1366983 38 317 1279983B 317 1243 1367

Paving EquipmentAP1000 318AP1050 318AP1055 318BG245 318BG245C 318BG260 318BG260C 318BG265 318BG270 319BG750 319BG2455 319PM465 319PM565 319PR450C 320PR1000 320RM350 320RR250 321RR250B 321SM350 321SS250 321SS250B 322

xx



FaX 775.851.6519



Page Page Page Page PageLift TrucksRT100 323T50B 1367V40E 323V50E 323V165C 323V180C 323V200C 323V225C 323V250C 324V265C 324V300C 324V330C 324V550 324 1367V620 324 1367V700 324 1367V800 324V900CH 324 1367V925 325 1367V925LH 325 1367V1100C 325 1367

xxi



FaX 775.851.6519

ENGINE APPLICATION INDEX

Machine Early Late BulldogModel Non-Vehicular Non-Vehicular All In One Kits

Page Page PageStationary & Marine Engines3114 346 12443116 346 12443126 354 12443126B 355 12443145 356 12443150 357 12443160 357 12443176B 3583176C 3593196 3593204 360 12453208 328 3613208NA 12453208T 12453304 328 374 12463304B 380 1246G3304 382 12463306 329 382 12473306B 397 1247G3306 400 12473406 4023406A 12483406B 408 12483406C 416 12483406E 430 1248G3406 430 12493408 329 431 12503408B 441 12503408C 446 12503408E 448G3408 1250G3408B 1250G3408C 12503412 330 449 12513412B 461 12513412C 462 12513412E 473 1251G3412 475 1251G3412C 1251PM3412 4753508 476 12523508B 485 1252G3508 12533512 487 12543512B 500 1254G3512 504 12553516 507 12563516B 520 1256G3516 524 1257G3516B 5283606 528G3606 528G3606B 5283608 528G3608 5283612 528G3612 5303616 530G3616 5313618 531

xxii



FaX 775.851.6519

ENGINE APPLICATION INDEX

Machine Early Late BulldogModel Non-Vehicular Non-Vehicular All In One Kits

Page Page PageStationary & Marine EnginesC-9 531C-12 531C-15 534C-32 534D311 331D315 332D318 332D320 332D326 332D330 333D330C 535 1247D333 333D333C 536G333B 334G333C 334D334 334 536D336 334 537D337 334D339 335D342 335 537 1258D342C 537G342C 336 538 1258D343 336G343 336D346 336D348 337G348 337D349 337 539G349 337 539D353 337D353C 539 1258D353E 541 1258G353D 338 541D364 338D375 338D379 339 542 1262D379B 543 1259G379 339 545 1259D386 340D397 340D398 340 547 1260D398B 548 1260G398 341 550 1260D399 341 551 1261G399 341 553 1261D3400 341D4400 341D4600 342D8800 342D13000 342D17000 343

xxiii



FaX 775.851.6519

OVER THE ROAD APPLICATION INDEX

Machine Early Late BulldogModel OTR Truck OTR Truck All In One Kits

Page Page PageOver The Road Truck Engines1140 560 12631145 560 12631150 561 12631160 562 12631670 5561673 5561673C 563 12631674 556 5641676 556 5641693 5643114 567 12633116 567 12633126 598 12633126B 616 12633126E 633 12633176 6513176B 6703208 6763208NA 12643208T 12643306 556 694 12643306B 710 12643306C 714 1264G3306 7243406 725 12653406B 740 12653406C 901 12653406E 974 12653408 556 1083 12653408B 1086C-7 1086C-9 1099C-10 1100C-11 1124C-12 1125 1266C-13 1171C-15 1175 1266C-16 1190C-18 1191D346 556D348 557D349 557 1191

xxiv



FaX 775.851.6519

GASKET GROUP DESCRIPTIONS

EARLY ENGINE SERIES

Complete Overhaul Gasket KitContains all of the gaskets and parts needed to rebuild the engine. No other kits are required.

Basic Gasket KitContains all of the gaskets and parts needed, when ordered with the supplement kit, to rebuild the engine.

Supplement Gasket Kit Contains all of the gaskets and parts needed, when ordered with the basic kit, to rebuild the engine.

Cylinder Head Gasket Kit (Valve Grind-Complete)Contains all of the gaskets and parts required, as originally configured by Caterpillar in their early series kits, to assemble either single or multiple cylinder head engines from the top of the cylinder block upward.

Single Cylinder Head Gasket Kit (Valve Grind - 1 Head)Contains all of the gaskets and parts required, as originally configured by Caterpillar in their early series kits, to assemble one cylinder head of a multiple cylinder head engine from the top of the cylinder block upward. Two are required for 1100, 3100 and 3208 series engines, 4 are required for other 8 cylinder engines, 6 are required for 12 cylinder engines and 8 are required for 16 cylinder engines.

Scroll and Sleeve Metering Fuel System Gasket Kit (S.M.F.S.)Contains the gaskets, locks, o-rings and seals to repair, assemble, and mount the fuel injection pump and governor, fuel priming pump, governor torque spring and fuel/air ratio control, fuel transfer pump, and fuel pump and governor drive groups.

Water Pump Gasket KitContains the internal gaskets and seals to assemble and mount a water pump to the engine and attaching water lines.

Raw Water Pump Gasket Kit Contains the internal gaskets and seals to assemble and mount a water pump to the engine and attaching water lines.

Aftercooler Water Pump Gasket Kit Contains the internal gaskets and seals to assemble and mount a water pump to the engine and attaching water lines.

xxv



FaX 775.851.6519


LATE ENGINE SERIES

Cylinder Head Gasket Kit (Valve Grind - Complete)Contains the gaskets, locks, o-rings, and seals required to assemble either single or multiple cylinder head engines from the top of the cylinder block upward. This kit does not include gaskets for installing and/or repairing attached components, i.e., aftercooler, air compressor, turbocharger, water lines, and fuel injection pump and governor. Individual gasket kits may be available for these components. This kit does not contain any precombustion chamber gaskets and seals. These items should be serviced with separate parts. Also, this kit does not contain fuel injector gaskets. These parts are contained in the fuel injector seal kit.

Single Cylinder Head Gasket Kit (Valve Grind - 1 Head)This kit is only established for one cylinder head of a multiple cylinder head engine. It contains the gaskets, locks, o-rings, and seals required to assemble one cylinder head from the top of the cylinder block upward. Fuel injector seals are contained in this kit when applicable. This kit does not include gaskets for attached components, i.e., aftercooler, air compressor, turbocharger, water lines, and fuel injection pump and governor. Individual gasket kits may be available for these components. This kit does not contain any precombustion chamber gaskets. These items should be serviced with separate parts.

Single Fuel Injector Seal KitContains the seals needed to mount the fuel injector into the cylinder head. The kit contains a bleeding seal, if required, but does not contain internal injector seals which should be serviced with separate parts.

Manifold Gasket KitContains the gaskets and seals to assemble and mount dry or water cooled manifold(s) to the engine and attaching air or water lines. If this kit is not offered, the necessary gaskets and seals will be included in the cylinder head and/or single cylinder head gasket kits.

Turbocharger Mounting Gasket Kit (Turbo Mounting)Contains the gaskets and seals for air lines, turbocharger mounting, and exhaust by-pass. This kit does not include internal turbocharger gaskets or seals.

Aftercooler and Lines Gasket KitContains the gaskets and seals to install the aftercooler and attaching lines.

Cylinder Block and Oil Pan Gasket KitContains the gaskets, locks, o-rings, and seals required to assemble an engine from the top deck of the cylinder block downward. This includes oil pan and side cover gaskets. In addition, the gaskets needed to repair and install an internal oil pump and internal oil lines are included when a separate oil pump gasket kit is not offered. If the oil pump is external, the oil pump and lines gaskets and seals will be contained in the oil pump gasket kit. This kit does not contain cylinder liner bands and seals. They are contained in the single cylinder liner gasket kit.

Single Cylinder Liner Gasket KitContains the band and seals to replace one cylinder liner.

xxvi



FaX 775.851.6519


LATE ENGINE SERIES

Oil Pump Gasket KitContains the internal mounting and attaching oil lines gaskets and seals for an external or internal oil pump. If this kit is not offered, oil pump gaskets and seals will be included in the cylinder block and oil pan gasket kit.

Front Cover and Housing Gasket Kit Contains the gaskets, locks, o-rings and seals to assemble the front cover and install it to the cylinder block. This kit contains the fan drive gaskets that are part of the front housing. Also, the kit contains the accessory and auxiliary drive gaskets and seals, accessory mounting and cover plate gaskets, and the crankshaft front seal.

Rear Cover and Housing Gasket KitContains the gaskets, locks, o-rings and seals to assemble the rear cover and install it to the cylinder block. This kit contains the flywheel locks, accessory and auxiliary drive gaskets and seals, and the crankshaft rear seal. The transmission and torque converter mounting gaskets will not be in the kit and must be ordered separately.

Scroll and Sleeve Metering Fuel System Gasket Kit (S.M.F.S.) Contains the gaskets, locks, o-rings and seals to repair, assemble, and mount the fuel injection pump and governor, fuel priming pump, governor torque spring and fuel/air ratio control, fuel transfer pump, and fuel pump and governor drive groups.

Front/Rear Power Take-Off Gasket Kit (Front/Rear P.T.O.)Contains the gaskets, locks, o-rings, and seals to install front or rear power take-off groups.

Water Pump Gasket KitContains the internal gaskets and seals to assemble and mount a water pump to the engine and attaching water lines.

Raw or Aftercooler Water Pump Gasket KitContains the internal gaskets and seals to assemble and mount a water pump to the engine and attaching water lines.

Water Lines Gasket KitContains the gaskets, locks, o-rings and seals to mount a water pump to the engine.

EXCEPTIONS:

1. For 3400 series engines, the kit includes the oil cooler line seals if the water lines are attached to the water pump and the oil cooler is not bolted onto the engine block and can be removed manually after removal of the water pump.

2. For 3500 series engines, this kit contains only the gaskets and seals for the exhaust manifold water lines. The standard water pump gasket kit is used to mount the water pump for 3500 series engines.

xxvii



FaX 775.851.6519


LATE ENGINE SERIES

Oil Cooler Gasket Kit (E/T/TC Oil Cooler)Contains the gaskets and seals to assemble and install the oil cooler and attaching oil lines. If the transmission and torque converter oil coolers are joined to the engine oil cooler and can be removed as one unit, the gaskets and seals to mount the transmission and torque converter to the engine will be included in this kit. If a separate kit is not offered, oil cooler gaskets and seals will be included in the cylinder block and oil pan gasket kit.

EXCEPTION:

For 3400 series engines, when the oil cooler is not bolted on the engine and can be removed manually after removal of the water pump, the gaskets and seals necessary to assemble and install the oil cooler to the water pump will be included in the water lines gasket kit.

Brake Oil Cooler or Oil Lines Gasket Kit (Brake OC/Eng. Oil LNS)If the engine is equipped with a brake oil cooler, this kit contains the gaskets and seals to assemble and mount the brake oil cooler and attaching oil lines. If the engine is not equipped with a brake oil cooler, a separate oil lines gasket kit containing the gaskets and seals to install the oil lines to the oil cooler, oil filter, oil pump and torque converter will be shown in this column. If this kit is not offered, oil lines gaskets and seals will be included in the oil cooler gasket kit.

Expansion Tank or Heat Exchanger Gasket Kit (EXP. Tank/Heat EX.)Contains the gaskets and seals to assemble and mount the expansion tank or heat exchanger.

Air Compressor Gasket Kit Contains the internal and mounting gaskets, o-rings, and seals for the air compressor and air compressor drive.

Fan Drive Gasket KitContains the gaskets, o-rings and seals to assemble and install the fan drive. If this kit is not offered, fan drive gaskets and seals will be included in the front cover and housing gasket kit.

xxviii



FaX 775.851.6519


BULLDOG ALL IN ONE GASKET KIT FORMAT

Example: BD-3306-039OF

BD Bulldog product line

3306 Engine family

039 Bulldog kit series

OF Kit type designation

BULLDOG ALL IN ONE KIT PROGRAM

Out of Frame Overhaul (OF) contains all of the parts necessary to rebuild an engine completely out of frame. The kit will typically include the following:

Cylinder head (valve grind) set Fuel injector O-rings (unless noted otherwise) Manifold gaskets & O-rings Turbo mounting gaskets & O-rings Aftercooler & lines set (mounting gaskets in 3406 truck apps) Cylinder block & oil pan set Cylinder liner kits (see note below for option to exclude these) Oil pump set Front cover & housing set (353 engine crankshaft seal excluded) Rear cover & housing set (353 engine crankshaft seal excluded) Fuel pump mounting gasket & O-rings Front/Rear PTO set Water pump gasket set Water lines set Oil cooler & lines set Air compressor mounting gasket

In Frame Overhaul (IF) contains all of the parts necessary to rebuild an engine in frame. The kit will typically include the following:

Cylinder head (valve grind) set Fuel injector O-rings (unless noted otherwise) Manifold gaskets & O-rings Turbo mounting gaskets & O-rings Aftercooler water lines set (mounting gaskets in 3406 truck apps) Oil pan gasket Cylinder liner kits (see note below for option to exclude these) Water pump mounting O-rings Oil lines set Air compressor mounting gasket

xxix



FaX 775.851.6519


BULLDOG ALL IN ONE KIT PROGRAM

Cylinder Head Replacement (HS) contains all of the parts necessary to remove and replace all the cylinder heads for the engine. The kit will typically include the following:

Cylinder head (valve grind) set Fuel injector O-rings (unless noted otherwise) Manifold gaskets & O-rings Turbo mounting gaskets & O-rings

Single Head Replacement (SH) contains all of the parts necessary to remove and replace a single cylinder head on engines with more than one head. The kit will typically include the following:

Cylinder head (valve grind) set Fuel injector O-rings (unless noted otherwise) Manifold gaskets All gaskets, seals & O-rings needed to replace head & connect adjacent head

Aftercooler (AC) contains all of the parts necessary to install aftercoolers.

Oil Pump (OP) contains all of the parts necessary to install oil pumps.

Turbocharger (TC) contains all of the parts necessary to install turbochargers.

Water Pump (WP) contains all of the parts necessary to install and or rebuild water pumps.

Note: All Bulldog All In One In Frame and Out of Frame overhaul kits include the cylinder liner bands and O-Rings. To order these without the cylinder liner kits add an X suffix to the kit number.

xxx



FaX 775.851.6519


EARLY TRANSMISSION SERIES

Torque Converter or Divider Gasket Kit

Transmission Gasket Kit

Flywheel Clutch Gasket Kit

Input Transfer Gear Gasket Kit

Output Transfer Gear Gasket Kit

Range Selector Gasket Kit

Oil System Gasket Kit

xxxi



FaX 775.851.6519


LATE TRANSMISSION SERIES

Transmission Parts & Case Gasket KitContains the gaskets, seals and locks required to reseal the case. This includes gaskets and seals to attach valves, tubes, hoses and adjoining groups such as the transfer gear case.

Transmission Planetary Gasket KitContains the gaskets, seals and locks required to reseal the planetary. Metal ring seals are not included in this kit. This gasket kit includes only parts found in the planetary group. Seals and gaskets joining the planetary to another component(s) or groups are not included if they are located in the parts book parts list for another component.

Transmission Hydraulic Control Gasket KitContains the gaskets and seals required to completely reseal the hydraulic control. Included are the gasket or seals for any covers to access the hydraulic control and any of the lines connecting to the control itself.

Bevel Gear or Input Transfer Gear Gasket KitContains the gaskets, seals and locks to reseal the bevel gear or the input transfer gear for connecting an adjoining group. If applicable, it also contains seals for connecting lines to the gear group.

Output Transfer Gear Gasket KitContains the gaskets, seals and locks to reseal the gear group plus seals for connecting any adjoining group(s). If applicable, it also contains seals for connecting lines to the gear group.

Transmission Manifold and Screen Gasket KitContains the gaskets and seals needed to access and reseal the transmission manifold and screen. It also contains seals for any lines that must be removed from the manifold and screen.

Transmission Pump Gasket KitContains the gaskets and seals to reseal a transmission pump. It also contains gaskets and seals for attaching the pump and any lines connected to the pump.

Transmission Filter Gasket KitContains the gaskets and seals to reseal a transmission filter. It also contains gaskets and seals for attaching the filter to the transmission and for lines connected to the filter.

Torque Converter or Torque Divider Gasket KitContains the seals, gaskets and locks to reseal the complete torque converter or torque divider, including the housing, if applicable. Any seals and gaskets required to fasten a pump and valve(s) to the converter/divider and the converter/divider to the engine are included.

Power Train Oil System Gasket KitContains the gaskets and seals to connect the tubes and hoses in the power train.

Powershift Transmission Overhaul Gasket KitContains the seals, gaskets and locks to reseal the complete powershift transmission. It has transmission mounting seals and gaskets. This kit also contains the seals and gaskets to attach valves and fill tubes that are removed with the transmission.

xxxii



FaX 775.851.6519


LATE TRANSMISSION SERIES

Direct Drive Transmission Overhaul Gasket Kit Contains the seals, gaskets and locks to reseal the complete direct drive transmission. It has transmission mounting seals and gaskets. This kit also contains the seals and gaskets to attach valves and fill tubes that are removed with the transmission.

Hydrostatic Transmission Case Group Gasket KitContains seals and gaskets to reseal the case group of the hydrostatic power control unit.

Hydrostatic Transmission Control Gasket KitContains the seals, gaskets and locks to reseal the control group of the hydrostatic power control unit.

Hydrostatic Transmission Case Lines Gasket KitContains the seals and backup rings to reseal the lines group of the hydrostatic power control unit.

Hydrostatic Transmission Control Lines Gasket KitContains the seals to reseal the control lines which are part of the power train. This kit also contains the hydrostatic filter and linkage seals.

Power Control Valve Cylinder Gasket KitContains the seals needed to reseal the two power control valve cylinders.

Replenishment Valve Gasket KitContains the seals and backup rings to reseal the two replenishment valves.

Piston Motor Gasket KitContains the seals and locks to reseal one piston motor. This kit also contains the seal to install the motor.

Hydrostatic Transmission Power Control Unit Overhaul Gasket Kit (HPCU Overhaul)Contains the seals, backup rings, gaskets and locks to reseal the complete hydrostatic power control arrangement.

1early vehicular



FaX 775.851.6519

Machine Page

Crawler Tractors (Dozers) 2

Motor Graders 16

Excavators & Loggers 20

Skidders 20

Pipelayers 21

Wheel Tractors & Scrapers 23

Mine Trucks & Coal Haulers 29

Compactors & Wheel Dozers 30

Wheel Loaders 31

Crawler Loaders 34

2North americaPhoNe 800.854.0275FaX 775.851.6518


FaX 775.851.6519

early vehicular

3early vehicular



FaX 775.851.6519



FaX 775.851.6519

early vehicular

5early vehicular



FaX 775.851.6519



FaX 775.851.6519

early vehicular

7early vehicular



FaX 775.851.6519



FaX 775.851.6519

early vehicular

9early vehicular



FaX 775.851.6519

10



FaX 775.851.6519

early vehicular

11early vehicular



FaX 775.851.6519

12



FaX 775.851.6519

early vehicular

13early vehicular



FaX 775.851.6519

14



FaX 775.851.6519

early vehicular

15early vehicular



FaX 775.851.6519

16



FaX 775.851.6519

early vehicular

17early vehicular



FaX 775.851.6519

18



FaX 775.851.6519

early vehicular

19early vehicular



FaX 775.851.6519

20



FaX 775.851.6519

early vehicular

21early vehicular



FaX 775.851.6519

22



FaX 775.851.6519

early vehicular

23early vehicular



FaX 775.851.6519

24



FaX 775.851.6519

early vehicular

25early vehicular



FaX 775.851.6519

26



FaX 775.851.6519

early vehicular

27early vehicular



FaX 775.851.6519

28



FaX 775.851.6519

early vehicular

29early vehicular



FaX 775.851.6519

30



FaX 775.851.6519

early vehicular

31early vehicular



FaX 775.851.6519

32



FaX 775.851.6519

early vehicular

33early vehicular



FaX 775.851.6519

34



FaX 775.851.6519

early vehicular

35early vehicular



FaX 775.851.6519

36



FaX 775.851.6519

early vehicular

37early vehicular



FaX 775.851.6519

38



FaX 775.851.6519

early vehicular

39LATE vEhicuLAr

NorTh AmEricAPhoNE 800.854.0275FAX 775.851.6518

worLdwidEPhoNE 775.851.6510

FAX 775.851.6519

Machine Page

Agricultural Tractors 40

Crawler Tractors (Dozers) 44

Motor Graders 129

Excavators & Loggers 154

Backhoe Loaders 189

Skidders 190

Pipelayers 197

Wheel Tractors & Scrapers 205

Mine Trucks, Coal Haulers & Articulated Mine Trucks 232

Compactors & Wheel Dozers 254

Integrated Toolcarriers 266

Wheel Loaders 271

Crawler Loaders 305

Paving Equipment 318

Lift Trucks 323

40



FaX 775.851.6519

late vehicular

Agricultural TractorsModel S/N First Last S/N First Last ArrangementEngine

8DNCH35 3116 98Z 4350 149811 UP 1088301 CT-1246133 CT-2646903 CT-2667643Valve Grind-Complete : Turbo Mounting : Cyl Block & Oil Pan :

CT-1246033CT-2243871CT-1301306Front Cover : Rear Cover : S.M.F.S. :

CT-1301307CT-2641260Water Pump Gasket : E/T/TC Oil Cooler :










8DNCH35 3116 98Z 19757 UP1 UP 1088301 CT-1246133 CT-1301310 CT-2667643Valve Grind-Complete : Turbo Mounting : Cyl Block & Oil Pan :



1DRCH45 3116 98Z 4350 149651 UP 1088300 CT-1246133 CT-2646903 CT-2667643Valve Grind-Complete : Turbo Mounting : Cyl Block & Oil Pan :












1DRCH45 3116 98Z 19756 UP1 UP 1088300 CT-1246133 CT-1301310 CT-2667643Valve Grind-Complete : Turbo Mounting : Cyl Block & Oil Pan :



3BKCH45 3116 98Z 1 UP1 UP 1546045 CT-3009500 CT-1422220 CT-1596061Valve Grind-Complete : Turbo Mounting : Cyl Block & Oil Pan :



ABFCH45 3116 98Z 1 UP1 UP 1546045 CT-3009500 CT-1422220 CT-1596061Valve Grind-Complete : Turbo Mounting : Cyl Block & Oil Pan :



7DMCH55 3116 98Z 17288 UP1 UP 1088300 CT-1246133 CT-1301310 CT-2667643Valve Grind-Complete : Turbo Mounting : Cyl Block & Oil Pan :



7DMCH55 3126 55K 1 1261 UP 1217258 CT-1376573 CT-2646903 CT-2671833Valve Grind-Complete : Turbo Mounting : Cyl Block & Oil Pan :



41LATE vEhicuLAr



FAX 775.851.6519


7DMCH55 3126 55K 127 UP1 UP 1217258 CT-1376573 CT-1301310 CT-2673857Valve Grind-Complete : Turbo Mounting : Cyl Block & Oil Pan :



7DMCH55 3126 55K 1552 UP1 UP 1544515 CT-2394290 CT-1422220 CT-2671833Valve Grind-Complete : Turbo Mounting : Cyl Block & Oil Pan :



7YCCH65 3306 08Z 32054 UP1 1899 7W4152 CT-2348016 CT-5P8773 CT-5P8772Valve Grind-Complete : Turbo Mounting : Aftercooler & Lines :

CT-6V4785CT-5P8768CT-8C0614Cyl Block & Oil Pan : Single Cyl Liner : Front Cover :

CT-2084836CT-8T7562CT-1383069Rear Cover : S.M.F.S. : Water Pump Gasket :

CT-5P9116E/T/TC Oil Cooler :

7YCCH65B 3306 08Z 60540 UP1900 UP 4P4976 CT-1551380 CT-5P8773 CT-5P8772Valve Grind-Complete : Turbo Mounting : Aftercooler & Lines :

CT-1383069CT-3E3336CT-5P8768Single Cyl Liner : Front Cover : Rear Cover :

CT-3E3337CT-2084836CT-9X8296S.M.F.S. : Water Pump Gasket : E/T/TC Oil Cooler :

7YCCH65B 3306 6NC 1 UP1900 UP 4P4976 CT-1551380 CT-5P8773 CT-5P8772Valve Grind-Complete : Turbo Mounting : Aftercooler & Lines :

CT-1383069CT-3E3336CT-5P8768Single Cyl Liner : Front Cover : Rear Cover :

CT-2084836CT-9X8296S.M.F.S. : Water Pump Gasket :

2ZJCH65C 3176 43Z 1 UP217 UP 7E3713 CT-2238228 CT-7X7978 CT-7X7975Valve Grind-Complete : Cyl Block & Oil Pan : Oil Pump :

CT-7X7971CT-2266620CT-2301500Front Cover : Rear Cover : S.M.F.S. :

CT-3E4329CT-3E4331Water Pump Gasket : E/T/TC Oil Cooler :

2ZJCH65C 3306 08Z 69250 78499217 999 4P9295 CT-3E7471 CT-9X2517 CT-5P8772Valve Grind-Complete : Turbo Mounting : Aftercooler & Lines :

CT-6V4763CT-5P8768CT-8C0614Cyl Block & Oil Pan : Single Cyl Liner : Front Cover :

CT-2084836CT-9X8296CT-1383069Rear Cover : S.M.F.S. : Water Pump Gasket :

CT-3E3337E/T/TC Oil Cooler :

2ZJCH65C 3306 08Z 78500 UP1000 UP 4P9295 CT-1551380 CT-9X2517 CT-5P8772Valve Grind-Complete : Turbo Mounting : Aftercooler & Lines :

CT-8T9485CT-5P8768CT-1870605Cyl Block & Oil Pan : Single Cyl Liner : Front Cover :

CT-2084836CT-1169560CT-1383069Rear Cover : S.M.F.S. : Water Pump Gasket :

CT-9X8566E/T/TC Oil Cooler :

2ZJCH65C 3306 6NC 1 UP1000 UP 4P9295 CT-1551380 CT-9X2517 CT-5P8772Valve Grind-Complete : Turbo Mounting : Aftercooler & Lines :




2ZJCH65C 3306 08Z 84540 UP1965 UP 1253263 CT-1301950 CT-2973126 CT-5P8772Valve Grind-Complete : Turbo Mounting : Aftercooler & Lines :



CT-1363688E/T/TC Oil Cooler :

2ZJCH65C 3306 6NC 1 UP1965 UP 1253263 CT-1301950 CT-2973126 CT-5P8772Valve Grind-Complete : Turbo Mounting : Aftercooler & Lines :




2YLCH70C 3306 08Z 72400 784991 UP 1024159 CT-1551380 CT-9X2517 CT-5P8772Valve Grind-Complete : Turbo Mounting : Aftercooler & Lines :

CT-8T9485CT-5P8768CT-8T7039Cyl Block & Oil Pan : Single Cyl Liner : Front Cover :



42



FaX 775.851.6519

late vehicular


2YLCH70C 3306 08Z 78500 UP1 UP 1024159 CT-1551380 CT-9X2517 CT-5P8772Valve Grind-Complete : Turbo Mounting : Aftercooler & Lines :




2YLCH70C 3306 6NC 1 UP1 UP 1024159 CT-1551380 CT-9X2517 CT-5P8772Valve Grind-Complete : Turbo Mounting : Aftercooler & Lines :




4CJCH75 3176 43Z 1 UP1 UP 7E3713 CT-2238228 CT-2235850 CT-2210859Valve Grind-Complete : Single Fuel Injector : Turbo Mounting :

CT-2301500CT-7X7975CT-7X7978Cyl Block & Oil Pan : Oil Pump : Front Cover :

CT-3E4329CT-7X7971CT-3E3330Rear Cover : S.M.F.S. : E/T/TC Oil Cooler :

4KKCH75C 3176 43Z 1 UP1 UP 7E3713 CT-2238228 CT-2235850 CT-2210859Valve Grind-Complete : Single Fuel Injector : Turbo Mounting :

CT-2301500CT-7X7975CT-7X7978Cyl Block & Oil Pan : Oil Pump : Front Cover :

CT-3E4329CT-7X7971CT-3E3330Rear Cover : S.M.F.S. : E/T/TC Oil Cooler :

4KKCH75C 3176 43Z 1 11391 UP 1006125 CT-3125931 CT-2235850 CT-2210859Valve Grind-Complete : Single Fuel Injector : Turbo Mounting :

CT-2301500CT-7X7975CT-1042780Cyl Block & Oil Pan : Oil Pump : Front Cover :



4KKCH75C 3176 43Z 1140 UP1 UP 1006125 CT-2237811 CT-2235850 CT-2210859Valve Grind-Complete : Single Fuel Injector : Turbo Mounting :




4KKCH75C 3176 43Z 1140 UP500 UP 1006125 CT-2237811 CT-2235850 CT-2210859Valve Grind-Complete : Single Fuel Injector : Turbo Mounting :




4KKCH75C 3176 43Z 1 1139500 UP 1006125 CT-3125931 CT-2235850 CT-2210859Valve Grind-Complete : Single Fuel Injector : Turbo Mounting :




6HSCH75E 3176C 7ZR 1 37401 UP 1165375 CT-3164416 CT-2245797 CT-2210859Valve Grind-Complete : Single Fuel Injector : Turbo Mounting :

CT-7X7975CT-1043560CT-2124660Cyl Block & Oil Pan : Single Cyl Liner : Oil Pump :


CT-3156714 CT-1433009Water Pump Gasket : E/T/TC Oil Cooler :

6HSCH75E 3176C 7ZR 3741 UP1 UP 1165375 CT-3164396 CT-2245797 CT-2210859Valve Grind-Complete : Single Fuel Injector : Turbo Mounting :

CT-7X7975CT-1043560CT-2124660Cyl Block & Oil Pan : Single Cyl Liner : Oil Pump :


CT-3156714 CT-1433009Water Pump Gasket : E/T/TC Oil Cooler :

9TKCH85C 3176 43Z 1 11391 UP 1006130 CT-3125931 CT-2235850 CT-2210859Valve Grind-Complete : Single Fuel Injector : Turbo Mounting :




9TKCH85C 3176 43Z 1140 UP1 UP 1006130 CT-2237811 CT-2235850 CT-2210859Valve Grind-Complete : Single Fuel Injector : Turbo Mounting :




43LATE vEhicuLAr



FAX 775.851.6519


4GRCH85D 3196 6AR 1 18811 UP 1245085 CT-3164416 CT-2245797 CT-2210860Valve Grind-Complete : Single Fuel Injector : Turbo Mounting :




4GRCH85D 3196 6AR 1882 UP1 UP 1245085 CT-3164396 CT-2245797 CT-2210860Valve Grind-Complete : Single Fuel Injector : Turbo Mounting :




6KSCH95E 3196 6AR 1 18811 UP 1165395 CT-3164416 CT-2245797 CT-2210860Valve Grind-Complete : Single Fuel Injector : Turbo Mounting :




6KSCH95E 3196 6AR 1882 UP1 UP 1165395 CT-3164396 CT-2245797 CT-2210860Valve Grind-Complete : Single Fuel Injector : Turbo Mounting :




44



FaX 775.851.6519

late vehicular

Crawler Tractors (Dozers)Model S/N First Last S/N First Last ArrangementEngine

06ND3 3204 45V 1 171591 UP 4N0369 CT-7X2396 CT-5P9945 CT-5P9946Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :

CT-5P9948CT-8T3377Rear Cover : S.M.F.S. :

06ND3 3204 45V 17160 UP886 UP 7N3800 CT-7X2397 CT-5P9945 CT-5P9946Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :


79UD3 3204 45V 1 171591 UP 4N0169 CT-7X2396 CT-5P9945 CT-5P9946Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :


79UD3 3204 45V 17160 UP4689 UP 7N3800 CT-7X2397 CT-5P9945 CT-5P9946Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :










23YD3B 3204 45V 1 UP1 UP 2W4387 CT-7X2846 CT-8T6732 CT-8T6731Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :

CT-1297724S.M.F.S. :

23YD3B 3204 45V 1 UP1 UP 7N5139 CT-7X2397 CT-5P9945 CT-5P9946Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :


23YD3B 3204 45V 32894 UP1166 UP 1W0162 CT-7X2401 CT-6V6444 CT-6V6445Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :

CT-6V4720CT-8C3792Rear Cover : S.M.F.S. :


CT-1297724S.M.F.S. :






CT-8T6734CT-8C3792Rear Cover : S.M.F.S. :

27YD3B 3204 45V 40210 600701 UP 2W7487 CT-7X2407 CT-8T6732 CT-8T6731Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :

CT-8T6734CT-7X7707Rear Cover : S.M.F.S. :







45LATE vEhicuLAr



FAX 775.851.6519


28YD3B 3204 45V 40210 600701 UP 2W7487 CT-7X2407 CT-8T6732 CT-8T6731Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :






2PCD3B 3204 45V 40547 703771 UP 4W6022 CT-7X2405 CT-6V2501 CT-8T2468Valve Grind-Complete : Turbo Mounting : Cyl Block & Oil Pan :

CT-8T2470CT-8C3792CT-8T2469Front Cover : Rear Cover : S.M.F.S. :

CT-8T7981E/T/TC Oil Cooler :

2PCD3B 3204 45V 70378 705461 UP 4W6022 CT-7X2405 CT-6V2501 CT-6V2588Valve Grind-Complete : Turbo Mounting : Cyl Block & Oil Pan :



2PCD3B 3204 7YJ 1 UP1 UP 4W6022 CT-7X2405 CT-6V2501 CT-8T2468Valve Grind-Complete : Turbo Mounting : Cyl Block & Oil Pan :



3YCD3B 3204 45V 48070 UP1 UP 4W8350 CT-7X2407 CT-8T6732 CT-8T6731Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :


5MCD3B 3204 45V 48070 UP1 UP 4W8350 CT-7X2407 CT-8T6732 CT-8T6731Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :


1PJD3C 3204 45V 69306 UP1 UP 9Y1875 CT-7X2407 CT-8T6732 CT-8T6731Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :


1PJD3C 3204 7YJ 1 UP1 UP 9Y1875 CT-7X2407 CT-8T6732 CT-8T6731Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :


3RFD3C 3204 45V 69332 UP1 UP 9Y1876 CT-7X2407 CT-8T6732 CT-8T6731Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :


4HJD3C 3204 45V 93409 UP1 UP 4P0907 CT-7X2846 CT-8T6732 CT-8T6731Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :

CT-7X7658CT-8C3792Rear Cover : S.M.F.S. :

4HJD3C 3204 7YJ 1 UP1 UP 4P0907 CT-7X2846 CT-8T6732 CT-8T6731Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :


5CJD3C 3204 45V 93430 UP1 UP 4P0907 CT-7X2846 CT-8T6732 CT-8T6731Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :


5CJD3C 3204 7YJ 1 UP1 UP 4P0907 CT-7X2846 CT-8T6732 CT-8T6731Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :


5KGD3C 3204 45V 69306 UP1 UP 9Y1875 CT-7X2407 CT-8T6732 CT-8T6731Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :


5KGD3C 3204 7YJ 1 UP1 UP 9Y1875 CT-7X2407 CT-8T6732 CT-8T6731Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :


5ZGD3C 3204 45V 90750 UP1 UP 4P0907 CT-7X2846 CT-8T6732 CT-8T6731Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :


46



FaX 775.851.6519

late vehicular


5ZGD3C 3204 7YJ 1 UP1 UP 4P0907 CT-7X2846 CT-8T6732 CT-8T6731Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :


6PFD3C 3204 45V 69332 UP1 UP 9Y1876 CT-7X2407 CT-8T6732 CT-8T6731Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :


7JFD3C 3204 45V 70378 705461 UP 4W6022 CT-7X2406 CT-6V2501 CT-6V2588Valve Grind-Complete : Turbo Mounting : Cyl Block & Oil Pan :



7JFD3C 3204 45V 40547 703771 UP 4W6022 CT-6V2501 CT-8T2468 CT-8T2469Turbo Mounting : Cyl Block & Oil Pan : Front Cover :

CT-8T7981CT-8T2470CT-8C3792Rear Cover : S.M.F.S. : E/T/TC Oil Cooler :

7JFD3C 3204 7YJ 1 UP1 UP 4W6022 CT-7X2406 CT-6V2501 CT-8T2468Valve Grind-Complete : Turbo Mounting : Cyl Block & Oil Pan :



7JGD3C 3204 45V 90750 UP1 UP 4P0905 CT-7X2846 CT-8T6732 CT-8T6731Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :

CT-7X7658CT-7X7707Rear Cover : S.M.F.S. :

7JGD3C 3204 7YJ 1 UP1 UP 4P0905 CT-7X2846 CT-8T6732 CT-8T6731Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :


8BFD3C 3204 45V 69306 UP1 UP 9Y1875 CT-7X2407 CT-8T6732 CT-8T6731Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :


8BFD3C 3204 7YJ 1 UP1 UP 9Y1875 CT-7X2407 CT-8T6732 CT-8T6731Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :


8DGD3C 3204 45V 90750 UP1 UP 4P0905 CT-7X2846 CT-8T6732 CT-8T6731Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :


8DGD3C 3204 7YJ 1 UP1 UP 4P0905 CT-7X2846 CT-8T6732 CT-8T6731Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :


1SGD4B 3204 45V 60736 UP1 UP 7C7739 CT-7X2406 CT-8T6732 CT-8T6731Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :


2XFD4B 3204 45V 60736 UP1 UP 7C7739 CT-7X2407 CT-8T6732 CT-8T6731Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :


1RJD4C 3204 45V 69350 UP1 UP 9Y0792 CT-7X7698 CT-6V2588 CT-8T6731Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :

CT-7X7697CT-8T6734CT-8C3792Rear Cover : S.M.F.S. : E/T/TC Oil Cooler :

1RJD4C 3204 7YJ 1 UP1 UP 9Y0792 CT-7X7698 CT-6V2588 CT-8T6731Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :


2CJD4C 3204 45V 84093 UP1 UP 7E6635 CT-7X2846 CT-8T6732 CT-8T6731Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :

CT-7X7697CT-7X7658CT-8C3792Rear Cover : S.M.F.S. : E/T/TC Oil Cooler :

2CJD4C 3204 45V 69350 UP1 UP 9Y0792 CT-7X7698 CT-6V2588 CT-8T6731Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :


2CJD4C 3204 7YJ 1 UP1 UP 7E6635 CT-7X2846 CT-8T6732 CT-8T6731Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :

CT-7X7697CT-7X7658CT-8C3792Rear Cover : S.M.F.S. : E/T/TC Oil Cooler :

47LATE vEhicuLAr



FAX 775.851.6519


2CJD4C 3204 7YJ 1 UP1 UP 9Y0792 CT-7X7698 CT-6V2588 CT-8T6731Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :


7KGD4C 3204 45V 90750 UP1 UP 4P0909 CT-7X2846 CT-8T6732 CT-8T6731Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :

CT-8T7981CT-7X7658CT-8C3792Rear Cover : S.M.F.S. : E/T/TC Oil Cooler :

7KGD4C 3204 7YJ 1 UP1 UP 4P0909 CT-7X2846 CT-8T6732 CT-8T6731Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :

CT-8T7981CT-1297724CT-8C3792Rear Cover : S.M.F.S. : E/T/TC Oil Cooler :

9BGD4C 3204 45V 90750 UP1 UP 4P0910 CT-7X2846 CT-8T6732 CT-8T6731Valve Grind-Complete : Cyl Block & Oil Pan : Front Cover :

CT-8T7981CT-7X7658CT-8C3792Rear Cover : S.M.F.S. : E/T/TC Oil Cooler :

07RD4D 3304 - - - - - - - - - - - -1 462 6A3021 CT-6V2236 CT-6V2238 CT-5P8768Valve Grind-Complete : Cyl Block & Oil Pan : Single Cyl Liner :

CT-6V2245CT-6V2242CT-6V2240Front Cover : Rear Cover : S.M.F.S. :

CT-6V2243CT-6V1343Water Pump Gasket : E/T/TC Oil Cooler :

07RD4D 3304 - - - - - - - - - - - -463 507 6A3021 CT-6V2237 CT-6V2238 CT-5P8768Valve Grind-Complete : Cyl Block & Oil Pan : Single Cyl Liner :



07RD4D 3304 48V 1 UP508 723 6A5543 CT-6V2246 CT-5P9415 CT-5P8768Valve Grind-Complete : Cyl Block & Oil Pan : Single Cyl Liner :

CT-6V2251CT-1383069CT-6V2247Front Cover : Rear Cover : S.M.F.S. :

CT-5P9418CT-2084836Water Pump Gasket : E/T/TC Oil Cooler :

07RD4D 3304 48V 10236 UP724 UP 6A7357 CT-6V2246 CT-5P9415 CT-5P8768Valve Grind-Complete : Cyl Block & Oil Pan : Single Cyl Liner :

CT-5P9419CT-1383069CT-6V2248Front Cover : Rear Cover : S.M.F.S. :


44HD4D 3304 - - - - - - - - - - - -1 759 6A3373 CT-6V2237 CT-6V2238 CT-5P8768Valve Grind-Complete : Cyl Block & Oil Pan : Single Cyl Liner :



44HD4D 3304 48V 1 10544760 1121 6A5544 CT-6V2246 CT-5P9415 CT-5P8768Valve Grind-Complete : Cyl Block & Oil Pan : Single Cyl Liner :



44HD4D 3304 48V 10545 UP1122 UP 6A7358 CT-6V2246 CT-5P9415 CT-5P8768Valve Grind-Complete : Cyl Block & Oil Pan : Single Cyl Liner :

CT-5P9419CT-8C8743CT-6V2248Front Cover : Rear Cover : S.M.F.S. :


47HD4D 3304 43V 24 2493510 554 2P6775 CT-6V2246 CT-5P9415 CT-5P8768Valve Grind-Complete : Cyl Block & Oil Pan : Single Cyl Liner :



47HD4D 3304 43V 2494 12105555 811 4N3799 CT-6V2246 CT-5P9415 CT-5P8768Valve Grind-Complete : Cyl Block & Oil Pan : Single Cyl Liner :

CT-5P9419CT-1383069CT-6V2247Front Cover : Rear Cover : S.M.F.S. :


47HD4D 3304 43V 12106 19002812 UP 7N3587 CT-6V2246 CT-5P9415 CT-5P8768Valve Grind-Complete : Cyl Block & Oil Pan : Single Cyl Liner :



47HD4D 3304 43V 19003 UP812 UP 7N3587 CT-6V2246 CT-5P9415 CT-5P8768Valve Grind-Complete : Cyl Block & Oil Pan : Single Cyl Liner :

CT-3Y8800CT-1383069CT-5P9416Front Cover : Rear Cover : S.M.F.S. :


48



FaX 775.851.6519

late vehicular


59JD4D 3304 - - - - - - - - - - - -1 UP 8A2321 CT-6V2237 CT-6V2238 CT-5P8768Valve Grind-Complete : Cyl Block & Oil Pan : Single Cyl Liner :



59JD4D 3304 - - - - - - - - - - - -388 1280 6A3021 CT-6V2237 CT-6V2238 CT-5P8768Valve Grind-Complete : Cyl Block & Oil Pan : Single Cyl Liner :



59JD4D 3304 48V 1 UP1281 1765 6A5543 CT-6V2246 CT-5P9415 CT-5P8768Valve Grind-Complete : Cyl Block & Oil Pan : Single Cyl Liner :



59JD4D 3304 48V 10236 UP1766 UP 6A7357 CT-6V2246 CT-5P9415 CT-5P8768Valve Grind-Complete : Cyl Block & Oil Pan : Single Cyl Liner :

CT-5P9419CT-1383069CT-6V2248Front Co

2013 bulldog gasket ecatalog

Documents

gasket sealing products

soft gaskets

reinforced gaskets

gasket products

hydraulic sealing items

rod seals

elastomeric products

broadest range of sealing