2010 ACCESSORY CATALOG

IFC | www.driverdesign.com

Ski-Doo

Windshield decalsdoes not obstruct vision • Universal design fits almost any vehicle

Flames

Rocket Bee

Techno Bee

• Fits 2” receivers • Gives your vehicle a custom finished look • Keeps dirt, snow and other debris out of your receiver

hiTch plUG MUd Flaps

• Keep your vehicle cleaner from dirt and mud • Reduce damage from rock chips and other road debris• Fit most trucks and sUVs• Quick and easy installation• One set of two

Ski-Doo

800.323.6563 | 1

ReaR & side WindOW sKins

Flames • Rocket Bee • Techno BeeRear skins (23”X66”) & side skins (6”X15”)

View from the inside looking out

-Trim to fit almost any vehicle-clear view from the inside looking out-non-permanent adhesive for easy removal-added UV protection

Ski-Doo® and the BRP logo are trademarks of Bombardier RecreationalProducts Inc, or its affiliates, used under license by Koronis Parts Inc.

Window Graphics

2 | www.driverdesign.com

Window Graphics Eye-catching rear and side window graphics that help you gain privacy while making a statement with your vehicle. Available in numerous designs including Rear and Side Window Skins.

+ Rear Window Skins are 23"x66"+ Side Window Skins are 3.25"x16"+ Installs in minutes+ Fits MOST windows (SUV’s, trucks, vans, cars, etc...)+ Added UV protection for vehicle interiors+ Helps keep interior temps low+ Added security and privacy+ Car wash safe

902-125-04 902-125-03902-125-02

902-125-07902-125-06 902-125-01

902-125-05

902-125-08

Personalize your vehicle with our line of Window Graphics

Refer to Application Guide for Special Order

Custom Graphics Program

Window Graphics

800.323.6563 | 3

Stake Pocket Protectors+ Keeps stake pockets free of debris+ Made of high-impact black ABS+ Paintable to match vehicle color+ No-drill, snap in installation system

Hitch Pins+ No need for clevis pin+ Padlock access+ Rust resisting+ Black zinc finish+ Dual stainless ball dents

Heavy Duty Molded Truck Bed & Tailgate Mats+ Provides rugged protection from dents, scratches,

and chemical spills+ Non-skid grid cushions cargo and prevents

dangerous load shifts+ Made of virgin natural rubber with special fibers

for added strength and flexibility

Trailer Rock & Salt Guards+ Keeps rocks, salt and mud off your vehicles,

snowmobiles, and ATV’s+ Reduce air turbulence while towing+ High-impact resistant+ Available for single and double trailers+ Double trailer applications available

for both straight and V-front

Speed Straps

4 | www.driverdesign.com

288532” RTD Flat Hooks

116011” 6ft RTD w/double S-Hooks

28502 RTD J-Hooks

137071” Camlock

90110 90111

Speed Strap Small Bag

Beard Seats

800.323.6563 | 5

41020 - Enduro

40500 - BENCH36”/2PASS-J30c

40010 Enduro GT

40250 Super T1

Hood Shields

6 | www.driverdesign.com

A simple concept... an intelligent solution.Leading Edge® Hood Shields are mounted at least 1" away from the hood with patented bracket system and breakaway nylon fastener system that is capable of clearing extremely tight hood tolerances and still keeping it away from the surface of your hood, protecting it from debris as well as from contact with the hood shield. The Leading Edge® Bracket System creates a drain system that prevents the build-up of damaging moisture and debris. The Leading Edge®

Our Features Make Our Hood Shields Superior to the Competition:

LE Series — Low profile hood shield that offers superior protection for your vehicle.

rubber washer isolation prevents damage caused by contact between plastic and steel. The high- impact acrylic used on the LE series is thicker and more rigid than the competitor’s products. Unlike Lexan® Polycarbonate, acrylic won’t flex against the hood and will not “yellow” or become dull when exposed to the elements. Driver Design Hood Shields are available in Clear, Smoke, and pre-painted. Consult your application guide for applications and available colors.

Driver Design

Competition

Met

al

Brac

ket M

ount

No Hoo

d

Conta

ct

High Im

pact

Acrylic

Brea

k-Away

Bolts Cus

tom

Mou

nting

Brac

kets

Can C

lean

Behind

No Bu

mpe

rs

Requ

ired

Will

Not C

ause

Hood

Damag

e

UPS-a

ble

Our Advantages

Leading EdgeLE® Series

Patent No. 4,952,006

Spoiler edge styling in true smoke or clearHigh Impact Acrylic for the LE Series. (Our clear shields can be painted for a custom look).

The High Impact Acrylic used on the LE Series is thickerand more rigid than the competitor’s products. Unlike Lexan®Polycarbonate, Acrylic won’t flex against the hood and will not “yellow” or become dull when exposed to the elements.

A Patented Bracket System maintains the space between the hood shield and the hood.

Rubber Washer Isolation prevents damage caused by plastic steel contact.

Patented Breakaway Nylon Fastener System prevents damageto your hood shield from overtightening of screws.

The Bracket System accommodates extremely tight tolerances andallows correct fitting to vehicles with rubber extrusions under the hood.

Our Features

Driver Design Hood Shields are easily paintable. Most new applications are available with easy no-drill installation.

Pre-painted LE Series hood shield is also available in numerous factory colors.

+ Most new applications available with easy no-drill installation

+ Custom designed “factory clean look”

+ Easily paintable

Air Flares

800.323.6563 | 7

Air flares provide a constant circulation of fresh air to your vehicles interior in any weather while keeping rain out and reducing window fogging. Driver Design Air Flares are made of durable high gloss acrylic. They are designed for a “factory clean look” and engineered to enhance your driving pleasure.

Our Air Flares are Designed for Style and Increased Driving Comfort

Pre-painted

Air Flares provide a constant circulation of fresh air to your vehicle’s interior in snow,

rain, or hot and humid weather.

Smoke

+ Reduces wind noise with side window open

+ Available in Smoke and Pre-painted

+ Easy no-drill installation with 3M tape

Plastic Hood Scoops

8 | www.driverdesign.com

901-1108 Reversible Cowl InductionScoop Dimensions: 28" L, 24" W, 3" HPackaged: Scoop, choice of 2 decal kits & 3M tapeAvailable in both black plastic & OEM pre-painted

Available in Carbon Fiber look (shown here in close-up)

901-1108 CFB

+ Fits sport compacts, street rods, cars, trucks & SUV’s

+ Certain applications have easy no-drill installation with 3M tape

+ Custom designed “factory clean look”+ Easily paintable+ Certain applications contain paintable

custom grille insert+ Available for most applications+ Newly added option – Specific scoops

available pre-painted with OEM colors

Plastic and Fiberglass Hood ScoopsEye-catching hood scoops combine lightweight with superior toughness. Made of shatter resistant thermo-molded plastic with smooth finish; can be painted to match your vehicle. Secures with tape, unless application guide specifies other. Some drilling may be required.

901-1104 shown here

901-1106 shown here

Plastic Hood Scoops

800.323.6563 | 9

901-1104 2pc. Performance (Small)Scoop Dimensions: 19" L, 10.5" W, 1.5" HPackaged: 1 set of two, 2 grille inserts & 3M tapeAvailable in both black plastic & OEM pre-painted

Available in Carbon Fiber look (shown here in close-up)

901-1104 CFB

901-1109 2pc. Performance (Medium)Scoop Dimensions: 27" L, 12.5" W, 1.5" HPackaged: 1 set of two, 2 grille inserts & 3M tapeAvailable in both black plastic & OEM pre-painted

Available in Carbon Fiber look (shown here in close-up)

901-1109 CFB

901-1111 2pc. Performance (Large)Scoop Dimensions: 34" L, 13" W, 1.5" HPackaged: 1 set of two, 2 grille inserts & 3M tapeAvailable in both black plastic & OEM pre-painted

Available in Carbon Fiber look (shown here in close-up)

901-1111 CFB

901-1112 SRT PerformanceScoop Dimensions: 33.5" L, 27" W, 2" HPackaged: Scoop & 3M tapeAvailable in both black plastic & OEM pre-painted

Plastic Hood Scoops

10 | www.driverdesign.com

901-1103 WRXScoop Dimensions: 10" L, 25" W, 1.75" HPackaged: Scoop, grill insert & 3M tapeAvailable in both black plastic & OEM pre-painted

Available in Carbon Fiber look (shown here in close-up)

901-1103 CFB

901-0090 Euro (Super Mini)Scoop Dimensions: 10" L, 8" W, 1.5" HPackaged: Scoop, grille insert & 3M tapeAvailable in both black plastic & OEM pre-painted

901-1106 PerformanceScoop Dimensions: 17" L, 14" W, 2.5" HPackaged: Scoop, 2 grille inserts & 3M tapeAvailable in both black plastic & OEM pre-painted

Available in Carbon Fiber look (shown here in close-up)

901-1106 CFB

901-0100 shown here

901-1112 shown here

Plastic Hood Scoops

901-0110 Euro (Medium)Scoop Dimensions: 13.5" L, 9.5" W, 1.5" HPackaged: Scoop, grille insert & 3M tapeAvailable in both black plastic & OEM pre-painted

Available in Carbon Fiber look (shown here in close-up)

901-0010 CFB

901-0120 Euro (Large)Scoop Dimensions: 16.5" L, 12.25" W, 2" HPackaged: Scoop & 3M tapeAvailable in both black plastic & OEM pre-painted

901-1102 Roof & Hood scoopScoop Dimensions: 15.5" L, 14.5" W, 2" HPackaged: Scoop, grille insert & 3M tapeAvailable in both black plastic & OEM pre-painted

901-1106

800.323.6563 | 11901-1104 shown here

901-2300 Street Rod/ Pro Stock (Large)

Scoop Dimensions: 41.75" L, 22.25" W, 7" HPackaged: ScoopAvailable in black plastic

Scoop is Rivet/Bolt on (hardware NOT included)

Plastic Hood Scoops

901-0800 Mopar Super Six-PackScoop Dimensions: 28" L, 31" W, 4.5" HPackaged: Scoop & 3M tapeAvailable in both black plastic & OEM pre-painted

Scoop is open in front

901-3000 Street Rod/ Pro Stock (Small)

Scoop Dimensions: 35" L, 20" W, 5" HPackaged: Scoop & 3M tapeAvailable in both black plastic & OEM pre-painted

901-2100 Street Rod/ Pro Stock (Medium)

Scoop Dimensions: 39" L, 24.5" W, 7.5" HPackaged: ScoopAvailable in black plastic

Scoop is Rivet/Bolt on (hardware NOT included)

12 | www.driverdesign.com

901-1105 shown here

901-1105 shown here

Plastic Hood Scoops

901-1510 Early Z-28 Camaro (Small)

Scoop Dimensions: 27.75" L, 19" W, 2" HPackaged: Scoop and 3M tapeAvailable in both black plastic & OEM pre-painted

Scoop is open in back

901-1520 Early Z-28 Camaro (Medium)Scoop Dimensions: 33" L, 21" W, 2" HPackaged: Scoop and 3M tapeAvailable in both black plastic & OEM pre-painted

Scoop is open in back

901-1500 Early Z-28 Camaro (Large)

Scoop Dimensions: 37" L, 22.5" W, 2" HPackaged: Scoop and 3M tapeAvailable in both black plastic & OEM pre-painted

Scoop is open in back

901-1700 Early Cowl Induction Z-28Scoop Dimensions: 38" L, 21.5" W, 5.5" HPackaged: ScoopAvailable in black plastic

Scoop is Rivet/Bolt on (hardware NOT included)Scoop is open in back

800.323.6563 | 13

901-0500 L-88 Corvette (Mini)Scoop Dimensions: 32" L, 18.25" W, 2" HPackaged: Scoop & 3M tapeAvailable in both black plastic & OEM pre-painted

Scoop is open in back

901-1300 427 Corvette- Stingray Type (Mini)

Scoop Dimensions: 23.5" L, 15" W, 1.5" HPackaged: Scoop & 3M tapeAvailable in both black plastic & OEM pre-painted

Scoop is open in back

901-0200 427 Corvette- Stingray Type

Scoop Dimensions: 36" L, 23" W, 3.75" HPackaged: Scoop & 3M tapeAvailable in both black plastic & OEM pre-painted

Scoop is open in back

901-1108 shown here

901-1109 shown here

Plastic Hood Scoops

14 | www.driverdesign.com

901-1105 shown here

901-1105 shown here

Plastic Hood Scoops

901-0300 L-88 CorvetteScoop Dimensions: 50" L, 31" W, 3.5" HPackaged: Scoop & 3M tapeAvailable in both black plastic & OEM pre-painted

Scoop is open in back

901-0700 SVO MustangScoop Dimensions: 24.5" L, 24.5" W, 2" HPackaged: Scoop & 3M tapeAvailable in both black plastic & OEM pre-painted

901-1200 Mopar Pro Stock (Mini)Scoop Dimensions: 28.5" L, 19.5" W, 3.5" HPackaged: Scoop & 3M tapeAvailable in both black plastic & OEM pre-painted

800.323.6563 | 15

Plastic Hood Scoops

16 | www.driverdesign.com

901-1107 Reverse EuropeanScoop Dimensions: 29.5" L, 16.5" W, 1" HPackaged: 1 set & 3M tapeAvailable in both black plastic & OEM pre-painted

901-1105 Louvered PerformanceScoop Dimensions: 17" L, 14" W, 2.5" HPackaged: Scoop, 2 grill inserts & 3M tapeAvailable in both black plastic & OEM pre-painted

901-0100 Cobra Jet (Mini)Scoop Dimensions: 21.5" L, 13" W, 2" HPackaged: Scoop & 3M tapeAvailable in both black plastic & OEM pre-painted

901-1107 shown here901-1510

Plastic Hood Scoops & Louvers

901-2400 Pro Stock “Snorkel” (Small)

Scoop Dimensions: 29" L, 16.5" W, 5" HPackaged: ScoopAvailable in black plastic

Scoop is Rivet/Bolt on (hardware NOT included)

901-2500 Pro Stock “Snorkel” w/5° Angle (Large)

Scoop Dimensions: 26.5" L, 16.5" W, 6" HPackaged: ScoopAvailable in black plastic

Scoop is Rivet/Bolt on (hardware NOT included)

Hood/Panel Louvers+ Easy no-drill installation + 6 Louvers per panel (5”x9”) + 9 Louvers per panel (5”x13”) + 12 Louvers per panel (5”x17”) + All sizes available in both black ABS

or carbon fiber look + Easily paintable

Available in Carbon Fiber look (shown here in close-up)

800.323.6563 | 17

901-5004 Early FordScoop Dimensions: 33" L, 26.5" W, 5" HPackaged: Scoop

Scoop is made of Fiberglass Scoop is open in front

Fiberglass Hood Scoops

901-5001 TeardropScoop Dimensions: 37.75" L, 26" W, 4" HPackaged: Scoop

Scoop is made of Fiberglass

901-5002 Mopar Six-PackScoop Dimensions: 28" L, 31.5" W, 3.5" HPackaged: Scoop

Scoop is made of Fiberglass

901-5003 Shelby MustangScoop Dimensions: 38.5" L, 30" W, 1.5" HPackaged: Scoop

Scoop is made of Fiberglass

18 | www.driverdesign.com

Fiberglass Hood Scoops

901-5005 Early Z-28 CamaroScoop Dimensions: 48.5" L, 25.5" W, 3" HPackaged: Scoop

Scoop is made of Fiberglass Scoop is open in back

901-5006 Cobra Jet (Mini)Scoop Dimensions: 21.5" L, 13.25" W, 1.75" HPackaged: Scoop

Scoop is made of Fiberglass Scoop is open in front

901-5007 Cobra JetScoop Dimensions: 29.5" L, 18.5" W, 2" HPackaged: Scoop

Scoop is made of Fiberglass

901-5008 L-88 Corvette (Mini)Scoop Dimensions: 34" L, 17.75" W, 2" HPackaged: Scoop

Scoop is made of Fiberglass Scoop is open in back

800.323.6563 | 19

901-5012 Early Trans-Am ShakerScoop Dimensions: 20" L, 17" W, 4" HPackaged: Scoop

Scoop is made of Fiberglass

Fiberglass Hood Scoops

901-5009 L-88 CorvetteScoop Dimensions: 48.5" L, 27.5" W, 4" HPackaged: Scoop

Scoop is made of Fiberglass Scoop is open in back

901-5010 1980 Z-28 CamaroScoop Dimensions: 48.5" L, 15.25" W, 1.5" HPackaged: Scoop

Scoop is made of Fiberglass

901-5011 1981 Z-28 CamaroScoop Dimensions: 49.25" L, 19" W, 2.5" HPackaged: Scoop

Scoop is made of Fiberglass

20 | www.driverdesign.com

Fiberglass Hood Scoops

901-5013 2.5” Z-28 Style CowlScoop Dimensions: 43" L, 28" W, 2.5" HPackaged: Scoop

Scoop is made of Fiberglass Scoop is open in back

901-5014 4” Z-28 Style CowlScoop Dimensions: 43" L, 28" W, 4" HPackaged: Scoop

Scoop is made of Fiberglass Scoop is open in back

901-5015 4” Z-28 Style CowlScoop Dimensions: 53.5" L, 28" W, 4" HPackaged: Scoop

Scoop is made of Fiberglass Scoop is open in back

901-5016 6” Z-28 Style CowlScoop Dimensions: 49" L, 28" W, 6" HPackaged: Scoop

Scoop is made of Fiberglass Scoop is open in back

800.323.6563 | 21