1.016 - data sheet - manhole cover lifter v7 manhole... · spanset—data sheet––spanset xtirpa...
TRANSCRIPT
SpanSet—Data Sheet––SpanSet Xtirpa Manhole Cover Lifter and Collar 1 of 3 1.016-7/07-18
SpanSet Australia Ltd
150 Old Bathurst RoadEmu PlainsNSW 2750
Australia
Telephone+61 2 4735 3955
Fax+61 2 4735 3630
Internetwww.spanset.com.au
SPANSET XTIRPA MANHOLE COVER LIFTER AND COLLARTechnical Data Sheet
Height SafetyLiftingLoad ControlSafety Management01
SpanSet—Data Sheet––SpanSet Xtirpa Manhole Cover Lifter and Collar 2 of 3 1.016-7/07-18
The XTIRPA™ Ratchet Manhole Cover Lifter was designed for easy handling of manhole covers. Light and durable the unit will offer an ergonomic and safe way of lifting the toughest lids without strain. The ratchet system allows you to always work in an ergonomic position.
SPXTIN2071 Manhole Cover Lifter
Maximum Capacity of Lifting Strap 1.1kN
Weight 6kg
Height 132cm
Width 21.5cm
Depth 49cm
Structural Tubes Aluminium
Levelling ScrewsStainless Ssteel
RubberHardware Zinc Plated Steel
Finish Security Yellow
SPXTIN2071 Xtirpa Manhole Cover Lifter andSPXTIN2217 Xtirpa Manhole Collar
AccessoriesThe following accessory hooks are also available:
25110 Small ‘J’ Hook 25111 Medium ‘L’ Hook 25112 Large ‘J’ Hook
SPXTIN2217 Manhole Collar 605-655mm Diameter
Maximum Working Load with Mast and Davit Arm SPXTIN2210
164kg
Maximum Capacity with Mast & Davit Arm 16kN
Weight 17kg
Rings, Handles, Reinforcements and Sleeve Aluminium
Sleeve Bearing PVC Pipe
Pin Zinc Plated Steel
LanyardNylon Covered
Steel Cable
Finish Security Yellow
SPXTIN2071
SPXTIN2217
Set up of the Lifter and Collar
The XTIRPA™ Ratchet Manhole Cover Lifter was designed for easy handling of manhole covers. Light and durable the unit will offer an ergonomic and safe way of lifting the toughest lids without strain. The ratchet system allows you to always work in an
SPXTIN2071 Xtirpa Manhole Cover Lifter andSPXTIN2217 Xtirpa Manhole Collar
SpanSet—Data Sheet––SpanSet Xtirpa Manhole Cover Lifter and Collar 3 of 3 1.016-7/07-18
*
Training CoursesHeight SafetyWorking Safely at Height
Working Safely at Heights Refresher
Height Safety Supervisor*
Height Safety Manager*
RescueRescue Systems Operator*
Vertical Rescue*
Tower and Pole Rescue*
Wind Access Rescue Technician*
EWP Emergency Escape
Gotcha Rescue
Confined SpaceConfined Space*
Confined Space - Refresher*
Breathing Apparatus*
Confined Space Non-Entry Rescue*
InspectionCompetent Person Practical Inspection and Record Keeping*
SpanSet AccreditationsISO 9001:2008 Certified Quality Management System
ISO 14001:2004 Certified Environment Management System
OHSAS 18001:2007 Certified Occupational Health and Safety Management Systems
Australian/New Zealand Standard 4801:2001 certified Occupational Health and Safety Management Systems
5 Tick Certified Product
Accredited Laboratory Tested by NATA to ISO/IEC 17025
ASQA Registered Training Organisation certified to ISO 9001:2008
Certified manufacturer to AS/NZS 1891.1 “Industrial Fall Arrest Systems and Devices”
Certified manufacturer to AS/NZS 1353.1 ”Flat Synthetic Webbing Slings”
Certified manufacturer to AS/NZS 4497.1 “Round Slings—Synthetic Fibre”
www.spanset.com.au