1-sided fireplace - keystone hardscapes...fireplace hearth fireplace burner fireplace burner note:...

1-Sided Fireplace3-Pallet Design

1-Sided Fireplace3-Pallet Design

www.keystonehardscapes.comStonegate No-Cut Designs • 1-Sided Fireplace

1

|

1-Sided Fireplace w1-HearthFront / Back Isometric

N.T.S.

Checked By:

Designed By: Date:

09/19/2019

Title:

This document may contain proprietary information and shall not be duplicated in whole or in part,nor distributed to others without written consent of Keystone Retaining Wall Systems, Inc.

The suitability and/or manner of use of any details contained in this document is the sole responsibilityof the user. Final project speci�c designs shall be prepared by a licensed professional engineer.

Copyright 2019 Keystone Retaining Wall SystemsRKM

Scale:Project: Drawing No:

General Note:In consideration of freeze / thaw issuesduring the cold weather season it isrecommended that this outdoor Built-InFireplace element be protected fromrain, snow and ice as necessary.

Fireplace Front Isometric

Stonegate 3-Pallet Outdoor Fireplace Details

Outdoor Fireplace Quantity Totals:Stonegate Unit quantities as follows:� Large Unit "A" - 16"/14" = 57 Units� Medium Unit "B" - 12"/10" = 57 Units� Small Unit "C" - 6"/4" = 56 Units

Fireplace Back Isometric

4444 W 78th St, Minneapolis, MN 55435952-897-1040 1 of 16

For Accessories - see page 2


2

|

N.T.S.

Checked By:

Designed By: Date:Title:This document may contain proprietary information and shall not be duplicated in whole or in part,nor distributed to others without written consent of Keystone Retaining Wall Systems, Inc.

The suitability and/or manner of use of any details contained in this document is the sole responsibilityof the user. Final project specific designs shall be prepared by a licensed professional engineer.



2 of164444 W 78th St, Minneapolis, MN 55435952-897-1040


1-Sided Fireplace w1-HearthStonegate Certified Accessory Details 09/19/2019

Stonegate Note:This Outdoor Living Element design usesStonegate No-Cut Designs accessories.See Stonegate No-Cut accessories list forqualifying manufacturers and models.

Front

Fireplace Concrete Top

Fireplace Concrete Top Note:See 9th Course Concrete Top Layout Detailsfor concrete top dimensions and details.

Back

Fireplace Insert Model FPI-4, 4/S

Fireplace Hearth Note:See 3rd Course Hearth Layout Detailsfor hearth dimensions and details.

Fireplace Hearth

Fireplace Burner

Fireplace Burner Note:See 4th Course Layout Detailsfor Fireplace Burner dimensions and details.

Access Door w/Vents Model FPI - D, D/S

FrontBack

Vents (2)

Note:This Outdoor Fireplace Burnerinsert shown for displaypurposes only.

Fireplace InsertBottom Plate

Fire Glass orFire Rock

Fireplace Insert Note:See 7th Course Layout Detailsfor fireplace installation details.

H-Burner

See page 16 for top dimensions.

See page 9 for hearth dimensions.

See page 13 for insert details.

See page 11 for access door details.

ACCESSORIES Sold Separately

See page 10 for burner details.

Assembled burner


3

|

N.T.S.

Checked By:

Designed By: Date:

09/19/2019

Title:This document may contain proprietary information and shall not be duplicated in whole or in part,nor distributed to others without written consent of Keystone Retaining Wall Systems, Inc.




General Note:In consideration of freeze / thaw issuesduring the cold weather season it isrecommended that this outdoor Built-InFireplace element be protected fromrain, snow and ice as necessary.

Fireplace Base Front Isometric


Outdoor Fireplace Quantity Totals:Stonegate Unit quantities as follows:· Large Unit "A" - 16"/14" = 57 Units· Medium Unit "B" - 12"/10" = 57 Units· Small Unit "C" - 6"/4" = 56 Units

Fireplace Base Back Isometric

1-Sided Fireplace w1-HearthBase Front / Back Isometric


Note:Structural support for block units overopenings not shown for visual purposes.


4

|

N.T.S.

Checked By:

Designed By: Date:

09/19/2019






Fireplace Front Rotated ElevationFireplace Back Rotated Elevation

56''

2''

54''

2'' ±

18''

Finished Grade(May Vary)

6" (Min.) Crushed Stone or Reinforced ConcreteLeveling Pad

1-Sided Fireplace w1-HearthFront / Back Rotated Elevations



5

|

Foundation Plan

1/2" = 1'-0"

Checked By:

Designed By: Date:

09/19/2019




Scale:Project:

Stonegate 3-Pallet Outdoor Fireplace DetailsDrawing No:

Foundation Isometric

Fireplace 6" (Min.) Reinforced Concrete orCrushed Stone Leveling Pad

Fireplace 6" (Min.) Reinforced Concrete orCrushed Stone Leveling Pad

94'' (7'-10")

58'' (

4'-1

0")

1-Sided Fireplace w1-HearthFoundation Layout Details



6

|

1st Course Plan

1/2" = 1'-0"

Checked By:

Designed By: Date:Title:





1st Course Isometric

Patio Aggregate Base Below

09/19/2019


Patio Aggregate BaseBelow

Note:This Fireplace design usesKeystone Stonegate units.Units shown are dimensioned as follows:� Large Unit "A" - 16"/14"� Medium Unit "B" - 12"/10"� Small unit "C" - 6"/4"� All Units are 10" in depth / 6" in height

Keystone StonegateUnits (Typ.)

Keystone Stonegate Units (Typ.)

16''

36'' F

irepl

ace

82'' (6'-10") Fireplace

62'' (5'-2")

10'' Hearth Extension

1-Sided Fireplace w1-Hearth1st Course Layout Details

4444 W 78th St, Minneapolis, MN 55435952-897-1040 6 of

46''

Block Removal as Req. (Typ.)(See Ventilation Note)


(See Block Placement Note)

Block Placement Note:Partially damaged or visually impaired block units may be used in thefront base area of the �replace just behind the hearth extension.Insure those units are structurally sound.

16

Ventilation Note:The �replace insert manufacturer may recommend ventilation of theinterior �replace area from a potential gas build up. If so, dependingon the recommendations, one or two blocks from either the 1st courseor 2nd course may be removed as needed. Only remove blocks fromone chosen course. Blocks marked with angular hatching aredesignated for removal as required on this course.As needed a small animal screen insert can be supplied to place inthe block removal area.If the 2nd course is to be used for venting, place and carefullycompact crushed stone or similar material to form a dense �oor in theentire 1st course interior open area of the �replace.The removed 2nd course blocks may be place in the 1st courseinterior open area in conjunction with �ll material or in the �replaceelement itself as needed.


7

|

1/2" = 1'-0"

Checked By:






2nd Course Plan

2nd Course Isometric


09/19/2019


1st Course Below

1st Course Below

Keystone StonegateUnits (Typ.)


16''

36'' F

irepl

ace

82'' (6'-10") Fireplace

72'' (6'-0")


1-Sided Fireplace w1-Hearth2nd Course Layout Details


46''





Ventilation Note:The �replace insert manufacturer may recommend ventilation of theinterior �replace area from a potential gas build up. If so, dependingon the recommendations, one or two blocks from either the 1st courseor 2nd course may be removed as needed. Only remove blocks fromone chosen course. Blocks marked with angular hatching aredesignated for removal as required on this course.As needed a small animal screen insert can be supplied to place inthe block removal area.If the 2nd course is to be used for venting, place and carefullycompact crushed stone or similar material to form a dense �oor in theentire 1st course interior open area of the �replace.The removed 2nd course blocks may be place in the 1st courseinterior open area in conjunction with �ll material or in the �replaceelement itself as needed.


8

|

3rd Course Plan

1/2" = 1'-0"

Checked By:






3rd Course Isometric


09/19/2019


2nd Course Below



16

16''

36'' F

irepl

ace

82'' (6'-10") Fireplace


62'' (5'-2")

1-Sided Fireplace w1-Hearth3rd Course Layout Details

8 of 16

46''

4444 W 78th St, Minneapolis, MN 55435952-897-1040



2nd Course Below


9

|

3rd CourseHearth Plan

1/2" = 1'-0"

Checked By:






3rd CourseHearth Isometric


Keystone Stonegate Units (Typ.)3rd Course Below

Install Hearth (See HearthInstallation Note)

09/19/2019


Keystone Stonegate Units (Typ.)3rd Course Below

82'' (6'-10") 3rd Course Hearth Below

86'' (7'-2") Hearth

10'' 3

rd C

ours

e H

eart

h Ex

tens

ion

Belo

w

12'' H

eart

h

Install Hearth

1''

1''

22'' 42'' 22''

2''

2''2''

1-Sided Fireplace w1-Hearth3rd Course Hearth Layout Details

9 of 164444 W 78th St, Minneapolis, MN 55435952-897-1040

13''

Hearth Installation Note:Install and align the hearth(s) for the �replaceon top of the 3rd course block units hearthextension(s), as shown.Unless otherwise directed, secure the hearth(s)with approved adhesive or bonding agent.


10

|

4th Course Plan

1/2" = 1'-0"

Checked By:





4th Course Isometric


09/19/2019



16''

36'' F

irepl

ace

82'' (6'-10") Fireplace

20''42'' Opening20''

3rd Course w/HearthBelow

3rd Course w/HearthBelow

1-Sided Fireplace w1-Hearth4th Course Layout Details


Block Openings to Receive Fireplace Insert Bottom Plate Flanges (2)

Install Fireplace InsertBottom Plate as Required(See Fireplace Insert BottomPlate Installation Note)

Fireplace Insert Bottom Plate Installation Note:Install and align the bottom plate for the fireplace insert ontop of the 3rd course block units so the rear bottom plateflanges (2) fit in the openings between the blocks of the4th course above, as shown.Also, align the front of the bottom plate with the front blockunits and fireplace hearth for proper alignment.

Install the fireplace insert upper back, sides and top platesw/flanges after the installation of the 7th course.

See fireplace manufacturers assembly instructions toproperly assemble the fireplace pieces.

Install Fireplace InsertBottom Plate as Required(See Fireplace Insert Bottom PlateInstallation Note)

Block Openings to ReceiveFireplace Insert BottomPlate Flanges (2)

Fireplace Burner Insert Note:It is recommended to use a stainless steel outdoorfireplace H-burner insert not to exceed 32"L x 8"W withsuitable hose and regulator accessories.Use 1 cubic foot ± of suitable fire glass or fire rock materialto fill the recessed section of the fireplace bottom plate.Install as per manufacturers assembly instructions.

Install Fireplace Burner Inserton Bottom Plate as Required(See Fireplace Burner Insert Note)

Install Fireplace Burner Inserton Bottom Plate as Required(See Fireplace BurnerInsert Note)



11

|

5th Course Plan

1/2" = 1'-0"

Checked By:







09/19/2019


4th Course Below



16''

36'' F

irepl

ace

82'' (6'-10") Fireplace

20''42'' Opening20''

4th Course Below

Install Access Door as RequiredPrior to 6th Course Installation(See Access Door Installation Note)

Install AccessDoor as Required Prior to6th Course Installation(See Access DoorInstallation Note)

Access Door Installation Note:Align the access door in the door opening so thatthe access door top support flanges of the doorframe are resting on top of the 5th course blocks.Make sure the top support flanges are bearingequally on the blocks on both sides of theopening and they also are 5" back from theoutside face of the blocks to the center of theflange so the 6th course block pin connectingchannels will be centered over the top supportflanges. After the 6th course blocks are placed,if needed, reposition the access door assemblyand secure in place as instructed.

Access Door Top Support Flange(Both Sides), (2)(See Access Door Installation Note)

5'' to � of Flange (2)




12

|

6th Course Plan

1/2" = 1'-0"

Checked By:








09/19/2019


5th Course Below



36'' F

irepl

ace

82'' (6'-10") Fireplace

20''42'' Opening20''

5th Course Below



Access Door and FlangesBelow

Access Door Below - 6th Course Blocks to be PlacedOver Access Doors Built-In Lintel


13

|

7th Course Plan

1/2" = 1'-0"

Checked By:







09/19/2019


6th Course Below



36'' F

irepl

ace

82'' (6'-10") Fireplace

20''42'' Opening20''

6th Course Below

Fireplace Insert Bottom PlateBelow

Install Fireplace Insert as Required(See Fireplace Insert Upper Installation Note)

Fireplace Insert Upper Support Flange(Both sides), (4)(See Fireplace Insert Upper Installation Note)

Fireplace Insert Upper Support Flange(Both Sides), (4)(See Fireplace Insert Upper Installation Note)

5'' to � ofFlange (2)

Fireplace Insert Upper Installation Note:Assemble the fireplace insert upper parts in thefireplace insert opening as per manufacturersassembly instructions. Insure that the fireplace insertupper support flanges (4) are properly resting on topof the 7th course block units. Make sure the top frontsupport flanges are bearing equally on the blocks onboth sides of the fireplace insert opening and theyalso are 5" back from the front outside face of theblocks to the center of the flange, so the 8th courseblock pin connecting channels above will be centeredover the top front support flanges.The rear top flanges will fit between the block spacesof the 8th course above. After the 8th course blocksare placed, if needed, reposition the fireplace insertassembly and secure in place as instructed.

16''



Install Fireplace Insertas Required(See Fireplace Insert UpperInstallation Note)


14

|

8th Course Plan

1/2" = 1'-0"

Checked By:








09/19/2019


7th Course Below



16''

36'' F

irepl

ace

82'' (6'-10") Fireplace

62'' (5'-2")

Fireplace Insert andFlanges Below



Fireplace Insert

7th Course Below


15

|

9th Course Plan

1/2" = 1'-0"

Checked By:








09/19/2019


8th Course Below


Keystone Stonegate Units (Typ.) Fireplace Insert Below



16''

36'' F

irepl

ace

82'' (6'-10") Fireplace

62'' (5'-2")


16

|

9th CourseConcrete Top Plan

1/2" = 1'-0"

Checked By:






9th CourseConcrete Top Isometric


Keystone Stonegate Units (Typ.)9th Course Below

Install Fireplace Concrete Top Pieces (5)(See Concrete Top Installation Note)

Install Fireplace Concrete Top Pieces (5)(See Concrete Top Installation Note)

09/19/2019


Keystone Stonegate Units (Typ.)9th Course Below

82'' (6'-10") 9th Course Below

62'' ± (5'-2") Open Area Below

86'' ± (7'-2") Concrete Top

Note:Fireplace concrete top "Pieces"are 2" thick.

Fireplace Concrete Top "Piece"Plan View Detail

40''

17 1

/4" ±

36'' 9

th C

ours

e Be

low

40'' C

oncr

ete

Top

16'' ±

Ope

nA

rea

Belo

w

1-Sided Fireplace w1-Hearth9th Course Concrete Top Layout Details


Concrete Top Installation Note:Unless otherwise directed install and secureconcrete top pieces with approved adhesive orbonding agent.

2''2''

2''

2''

1-sided fireplace - keystone hardscapes...fireplace hearth fireplace burner fireplace burner note:...

Documents