07 sagit konferens okt 2016 - francois crelo · cargo securing meeting stockholm 25th october 2016....
TRANSCRIPT
Safe loading
Anticipated guidelines on cargo securing for combined rail transports
THE UIC LOADING RULES
25 October 2016
CRELO François
The International Union of Railways195 Members
Cargo securing Meeting Stockholm 25th October 2016
The UIC's main objectives
• Promote rail transport at world level with the objective of optimally meeting current and future challenges of mobility and sustainable development,
• Promote interoperability, create new world standards for railways (including common standards with other transport modes),
• Develop and facilitate all forms of international cooperation among Members, facilitate the sharing of best practices (benchmarking),
• Support Members in their efforts to develop new business and new areas of activities,
• Propose new ways to improve technical and environmental performance of rail transport, improve competitiveness, reduce costs.
Cargo securing Meeting Stockholm 25th October 2016
THE UIC Working Group LOADING RULES
1) Presentation of the Working Group
2) The mode of operation of the Working Group
3) The regulations in Europe
4) The legitimacy in Europe
5) The information to the customers
6) Target PDCA Proceed-Do-Check-Act
7) Intermodal transport project Destiny
Cargo securing Meeting Stockholm 25th October 2016
1) Presentation of the working groupOrganization of the working group of the UIC loading rules
Cargo securing Meeting Stockholm 25th October 2016
2) The mode of operation of the working group
Cargo securing Meeting Stockholm 25th October 2016
Twisted straps/bindings
• are grounds for removing wagons from trains
• are grounds for operators being investigated and held to account if detected by regulators during inspections
EN 12195 also stipulates that bindings should not be twisted.
Remedial action is expensive
And difficult to carry out since the ability to inspect the load is limited.
The mode of operation of the working group
Cargo securing Meeting Stockholm 25th October 2016
The mode of operation of the working group
Cargo securing Meeting Stockholm 25th October 2016
The mode of operation of the working group
Change point 5.8.2 Volume 1
Point 5.8.2, binding of goods
Straps used for indirect fastenings and for the binding ofgoods can be tensioned twisted. The total twist of a Strapmay not exceed 3 twists of 360°.
Cargo securing Meeting Stockholm 25th October 2016
3) The regulations
Volume 1 Loading Guidelines Principles
Cargo securing Meeting Stockholm 25th October 2016
Volume 2 Loading Rules (90)
Cargo securing Meeting Stockholm 25th October 2016
3) The regulations
1) Blue Loading example
Cargo securing Meeting Stockholm 25th October 2016
3) The regulations
Pink Loading Example
Cargo securing Meeting Stockholm 25th October 2016
4) The legitimacyLegal Base
prEN 16860_EN.pdf
EPSF (National France Security Department) _Referentiel_Prescriptions_de_chargement_des_véhicules_20150310.pdf
101.2 For the autorisation to ride on the national (French) infrastructure the wagons and the loading must be in accord with the loading rules published by the UIC
AVV Artikel 29: Loading rules
The RU shall ensure that shippers comply with the UIC loading rules in force.
Cargo securing Meeting Stockholm 25th October 2016
5) The information to the customers
Cargo securing Meeting Stockholm 25th October 2016
5) The information to the customers
Track and Structures Sector – Activity Report 2012
6) Target PDCA Proceed-Do-Check-Act
• More secure rail transports
• Commercial aspects should be considered when possible
Cargo securing Meeting Stockholm 25th October 2016
6) Target PDCA Proceed-Do-Check-Act
Cargo securing Meeting Stockholm 25th October 2016
Project Destiny
TARGET
Cargo securing Meeting Stockholm 25th October 2016
7) Intermodal Transport Project Destiny
1. History
• 2013-11-04 Meeting of the UNECE in Geneva CTU Packaging code
• November 2013 Opinion UIC. (Risk analysis, driving tests, ILU controls)
• February 2014 Joint meeting UIRR,UIC.
• May June 2014 Driving tests + ILU controls
• September 2014 Evaluation of the insights in Brussels and first decision of the working group loading rules.
• May 2015 Start of risk analysis
• 2016 Beginning 2017 Evaluation of the Risk Analysis by Belgo rail and Harmonisation concerning the acceleration values Rail/Road.
Cargo securing Meeting Stockholm 25th October 2016
7) Intermodal Transport Project Destiny ILU Controls
Cargo securing Meeting Stockholm 25th October 2016
7) Intermodal Transport Project Destiny
Responsibility
Annex B to the Convention concerning International Carriage by Rail (COTIF) of 9 June 1999 Uniform Rules concerning the Contract for International Carriage of goods (CIM)
§ 2 When the goods is loaded by the sender, he is liable for all theconsequenses of defective loading and shall compensate thecarrier particular damages incurred therefrom. The carrier mustprove the defective loading.
In plain language, the loader (sender/shipper) is RESPONSIBLE forthe rule-compliant loading. This usually starts with a roadtransport in an combined transport.
Cargo securing Meeting Stockholm 25th October 2016
7) Intermodal Transport
Cargo securing Meeting Stockholm 25th October 2016
7) Intermodal Transport
Cargo securing Meeting Stockholm 25th October 2016
7) Intermodal Transport
Cargo securing Meeting Stockholm 25th October 2016
7) Intermodal Transport Project Destiny
Cargo securing Meeting Stockholm 25th October 2016
Dynamic Tests and Loadsecuring Inspections
Cargo securing Meeting Stockholm 25th October 2016
Dynamic Tests and Loadsecuring Inspections
Cargo securing Meeting Stockholm 25th October 2016
7) Target Project Destiny
Cargo securing Meeting Stockholm 25th October 2016
Dynamic Tests and Loadsecuring Inspections
Cargo securing Meeting Stockholm 25th October 2016
Dynamic Tests and Loadsecuring Inspections
Cargo securing Meeting Stockholm 25th October 2016
Dynamic Tests and Loadsecuring InspectionsResult
Voted Change in Volume 1 Point 1.1
Only for the combined transport from Terminal to Terminal (Block Train Transport) with accompanying switching moves, the acceleration values mentioned in the CTU >Package Guidelines are applicable. The Load securing must be in accord with the Best Practice Guidelines for the road Transport or with the CTU Package Guidelines.
DESTINY-TO3_LoadSecuring_Report - Dynamic tests_final_EN.pdf
DESTINY-TO3_LoadSecuring_Report_Inspections-_final_EN.pdf
Cargo securing Meeting Stockholm 25th October 2016
Thank you for your kind attention
François CRELO President of the working group of the UIC loading rules
Thank You