01 blc720 spec - acuitybrandslighting.com · lcb 22ft linear plan winona offers the ability to...

IP66

Controller (Easyl™ Solo / Touch / Pro)DMX-Power Integrator (required for installation)Feed Cable (required for installation)Jumper Cable

See page 4See page 4See page 4See page 4

IntroductionPARATA 729W Series linear surface mount luminaires are designed to graze or wash exterior architectural features or facades with vibrant color. The PLS729W is available in 1ft, 2ft, 3ft, or 4ft lengths with various optics that provide the user exceptional beam control placing the light where it is required. Parata 729W Series linear surface mount luminaires produce best in class efficacy, producing 546 lumens per foot while consuming only 10.5 watts per foot. Each luminaire is factory calibrated for color consistency and specific CCT 2700K, 3000K, 3500K, or 4000K personalities may be selected for white light. Remote device management (RDM) capability allows bi-directional communication simplifying installation. Resolution can be field selected as per fixture or per foot.

Hit the Tab key or mouse over the page to see all interactive elements.

Project

QTY

Type

NOTES

Describe Modification: Accessories

PARĀTAPLS729W RGBLED Linear Surface

Winona Lighting • 3760 West Fourth Street • Winona, MN 55987 • 800.328.5291 • www.winonalighting.com

1

Rev. 04/23/15PLS729W_PARATA

© 2011-2015 Acuity Brands Lighting, Inc. All Rights Reserved. “Winona” is a registered trademark of Acuity Brands Lighting. Products herein may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.

WIN NAsolutions forms light

®

Specifications

Width:

Height 1:

Height 2:

Height 3:

2-3/4"(70 mm)

3"(76 mm)

4-5/16"(110 mm)

4-1/16"(103 mm)

12-9/16"(319 mm)

24-3/8"(619 mm)

36-3/16"(919 mm)

48"(1219 mm)

3.5 lbs(1.6 kg)

7 lbs(3.2 kg)

10.5 lbs(4.8 kg)

14 lbs(6.4 kg)

700ADJ2 - Adjustable MountAdditional mountsshown on page 5Length/Weight:

700FMCMount

700ADJ1Mount

700ADJ2Mount

L

H3W

OW

H1 H2

W

WARRANTY5-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C.Specifications subject to change without notice.

Ordering Information EXAMPLE: PLS729W LCB 20FT MSL4 700ADJ2 15DEG RGB MVOLT FCLP10A BKT

PLS729W

Parata RGB LED Linear Surface Wet

PLS729W Linear Center BalanceLinear Longest PossibleLinear Same Length

LCBLLPLSL

Series Linear Plan

1FT Section Length2FT Section Length3FT Section Length4FT Section Length

MSL1MSL2MSL3MSL4

Linear Plan

FT——

Total Run Length

NOFCLFCLP10AFCLP50A

No feed cable (order separate)10FT (1418) Feed Cable Linear Parata50FT (1418) Feed Cable Linear Parata

MOD Modification/Consult FactoryBKTWHTDBTSITCPF

Voltage Electrical Option Finish Special

MVOLT Multi Volt 120V thru 277V Black TexturedWhite TexturedDark Bronze TexturedSilver TexturedCustom Paint Finish

MVOLTRGB

RGB Color Changing

Source

15DEG55X15DEG60DEG70X40DEG

15 Degrees55 Degrees x 15 Degrees60 Degrees70 Degrees x 40 Degrees

Mounting Accessory Distribution

Adjustable Mount Hinge (700 Series)Adjustable Mount (700 Series)Fixed Mount (700 Series)

700ADJ1

700ADJ2

700FMC(See page 2 for definitions)

IES data is available at www.winonalighting.com. Always refer to our website for the latest IES file updates.

Test Report: BAL17329IES LM 79-08PLS729W MLS4 15DEG 30KLumens: 2,182Wattage: 42WEfficacy: 52.1Max. Candela: 15,225

15° DISTRIBUTION 60° DISTRIBUTION55° X 15° DISTRIBUTIONTest Report: BAL17330IES LM 79-08PLS729W MLS4 55X15DEG 30KLumens: 2,143Wattage: 42WEfficacy: 51.1Max. Candela: 5,318

70° X 40° DISTRIBUTIONTest Report: BAL17331IES LM 79-08PLS729W MLS4 70X40DEG 30KLumens: 2,113Wattage: 42WEfficacy: 50.4Max. Candela: 2,195

464

928

1392

1856

Test Report: BAL17332IES LM 79-08PLS729W MLS4 60DEG 30KLumens: 2,142Wattage: 42WEfficacy: 51.1Max. Candela: 1,856

Beam WidthCenter Beam fc

11' 6"

23' 1"

34' 7"

46' 2"

57' 8"

17.5 fc

4.6 fc

2.1 fc

1.2 fc

0.7 fc

10'

20'

30'

40'

50'

3806

7613

11419

15225

ISO Candela Plot

1330

2659

3989

5318

ISO Candela Plot

549

1098

1646

2195

ISO Candela Plot ISO Candela Plot

Beam WidthCenter Beam fc

3' 6"

7' 0"

10' 7"

14' 1"

17' 8"

10'

20'

30'

40'

50'

Illuminance at a DistanceBeam WidthCenter Beam fc

11' 6"

23' 1"

34' 7"

46' 2"

57' 8"

3' 6"

7' 1"

10' 7"

14' 1"

17' 8"

50.1 fc

13.2 fc

5.9 fc

3.3 fc

2.1 fc

10'

20'

30'

40'

50'

Illuminance at a Distance Illuminance at a DistanceBeam WidthCenter Beam fc

10'

20'

30'

40'

50'

Illuminance at a Distance

20.9 fc

5.5 fc

2.5 fc

1.4 fc

0.9 fc

102.0 fc

33.7 fc

16.0 fc

9.2 fc

6.0 fc

55° 15°11' 6"

23' 1"

34' 7"

46' 2"

57' 8"

5' 4"

10' 9"

16' 1"

21' 5"

26' 10"

70° 40°

Linear Plan

Peformance Data

Photometric Diagrams

Lumen OutputLumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representativeof the configurations shown, within the tolerances allowed by Lighting Facts. Actual performance may differ as a result of end-user environment and application. Contact factory for performance data on any configurations not shown here.

48 42

1555 x 1570 x 40

60

15225531821951856

2182214321132142

52515051

16163962

16556961

364282109

3690126104

LEDs SystemWatts

NominalDistribution

FieldAngle

BeamAngle

RGB

Max Cd Lumens LPW

15˚

55˚

40˚

70˚

60˚15˚

Model

PLS729W MLS4PLS729W MLS3PLS729W MLS2PLS729W MLS1

Current (A)

SystemWatts (W) 120V 208V 240V 277V 347V 480V

4231.521

10.5

0.350.260.180.09

0.200.150.100.05

0.180.130.090.04

0.150.110.080.04

Electrical Load

----

----


2




®

Lumens: 546 lm per foot (15° optic)

Wattage: 10.5w/ft

Efficacy: 52 LPW

Voltage: 120 - 277V

Distribution: 15°, 55° x 15°, 70° x 40°, 60°

Control System: Easyl DMX512 controller with LCD touchscreen

FEATURES & SPECIFICATIONSCertification/Compliance: 729W -ETL wet location, cETL, IP66

Weight: 12" - 3.5 lbs / 24" - 7 lbs / 36" - 10.5 lbs / 48" - 14 lbs

Warranty: 5 years

Assembled in America: Buy American Act Compliant

Lumen Maintenance: 50,000 hours L70 @ 40°C

Size: 2.75"W x 3"H

Housing: Extruded aluminum

Finish: Polyester powder coat painted finish

Lens Material: Extruded acrylic

Temperature Ranges: -20° to 40°C

2' 4' 4' 4' 4' 4'

4'4'4'4'4'

4' 4' 4' 4'3' 3'

LLP 22FT

LSL 20FT

LCB 22FT

Linear PlanWinona offers the ability to provide a continuous run plan to suit your requirements by optionally offering three methods of configuration.

LSL Linear Same Length: In this configuration each segment is the same length is standardized based on the longest length available and is the only option provided. Because it is dependent on one segment length there are mathematical limitations on what overall row lengths can be achieved. Example: 22 FT row would be achieved with (5) 4FT long segments equaling 20 FT (nominal).

LCB Linear Center Balanced:This configuration incorporates the longest center segment(s) along with any additional lengths required to fill located at each end. Example: 22FT row would have (2) 3FT segments (one at each end) and (4) 4FT intermediate segments located in between.

LLP Linear Longest Possible:In this plan the longest length available is optimized resulting in the fewest segments and mounting locations. Caution should be used where balanced appearance is a concern. Example: 22FT row would have (5) 4FT segments and (1) 2 FT segment located at one end.

The Easyl controller is a self-contained DMX controller providing one universe of DMX-512 control. A complete system RDM set-up and playback control solution, the Easyl includes:- Pre-loaded shows, random show, rainbow feature, and chase feature- On-screen manual color select with favorite presets store/recall- On-screen master intensity slider and speed control slider- Compatibility with RDM and non-RDM DMX-512 fixtures- All show editing done through LCD user interface- User-configurable logo on screen saver

Belden 9829 cable is the preferred communication/data cable used to carry the DMX signal to and from the PARATA luminaires. The total length of this cable must not exceed 1000 feet from the DMX controller to the last luminaire in the chain.

DPI box (Data Power Integration) is used to bundle DMX to line voltage and deliver them to the luminaire. This box provides necessary isolation between the DMX control and line voltage and is required for all PARATA installations. The DPI box also serves as a 4-channel splitter enabling up to 128 fixtures to be controlled from a single DPI box. Refer to installation instructions for dimensions and mounting details.

120V-277V input to DPI box. Metallic conduit and standard fittings are compatible as are multi-conductor cords provided they are appropriate to the mounting location.

Feed cable connects junction box with first fixture in a run. 14 ga. conductors carry power, shielded 18 ga. conductors carry data. Input end is stripped for connection to the junction box, output end includes a female plug forfixture connection. Also included with each feed cable is a sealing cap for the end of each run.(Contact factory for availability of custom feed cable lengths)

A maximum of 32 luminaires can be connected to a single output channel of the DPI box. The maximum length of cord and luminaire run combined is 1000' per DMX/RDM specification.

Power and Data can be run to junction box locations in rigid conduit. Use Belden 9829 for data and copper wire per local code for power. Use appropriate fitting for combination cord.

To ensure data integrity, a 120 Ohm termination resistor is required at the last luminaire in each run. See installation instructions.

A

B

C

D

E

F

G

H

This very basic system wiring diagram provides an overview of components and materials required for a simple dynamic color installation of PARĀTA luminaires controlled by an Easyl controller. These diagrams should not be used in place of actual installation instructions or submittal drawings prepared for a specific project.

Basic System Wiring Information

Easyl Controller

A dynamic color-changing luminaire installation can be as simple as a single luminaire and one control to many different luminaires in multiple locations being triggered and manipulated in real time. Consulting with the factory at the beginning stages of the project will ensure the required equipment be specified and properly installed.

Power & DMX Connection in DPI Box

F

H120-277V

A

E

G

D

B

C


3




®

+ -DMX THRU

+

-COM

L1 N GRND GRNDL1 N

GRNDL1 NL1 N GRND

COM

DMX IN

1 2 3 4

+

-COM

1 2 3 4

+

-COM

1 2 3 4

+

-COM

1 2 3 4

1234

+ -

COM

1234

FEED CABLE CODING

LINE VOLTAGE120-277V

INPUT POWERDMX THRU

TO NEXT DPI

DMX INPUTFROM EASYL

BLACKWHITE

GREENBARE DRAIN WIRE

GREYVIOLET

ORANGE(CAP DO NOT USE)

DMX OUT A DMX OUT B DMX OUT C DMX OUT D

GRND

Maximum Run Length

Model

PLS729W

Voltage MaxFixtures

MaxRun

Length

120V277V

28*32

112ft128ft

*4ft fixtures max. Runs of shorter fixtures will allow up to 32 fixtures

Accessory Options

EasylTM LED Show Controller with LCD touchscreen (integral power supply)

EasylEZ Easyl Solo

Easyl Touch

Easyl Pro

EZSOLOEZTOUCHEZPRO

120/277347

120V or 277V347

blackwhite

BKWH

EZ

Family Version Finish Supply Voltage


4




®

Integrates DMX signal & 120-277 line voltage onto a single cable. Exterior rated, up to 4 output feeds, Silver Textured Finish

liquid-tight cord gripCORDGP2

Liquid-Tight Cord Grip

Model

CORDGP2

10 1/4"(260mm)

6 5/16"(160mm)

3 9/16"(90mm)

1 3/4"(44mm)

Cable Diameter Range.44 - .50 diameter

1/2 NPSM Threads

1FT JUMPER(1418) CABLE LINEAR 3FT JUMPER(1418) CABLE LINEAR 5FT JUMPER(1418) CABLE LINEAR

JCL1AJCL3AJCL5A

Jumper Cable (Linear) *Optional*

Model

10FT (1418) FEED CABLE LINEAR BLANCA50FT (1418) FEED CABLE LINEAR BLANCA

FCLP10AFCLP50A

Feed Cable (Linear) *Required for all installations*

Model

DPI4W- DMX/POWER INTEGRATOR BOXDPI4W

DMX / Power Integrator

Model

Feed cable connects junction box with first fixture in a run. 14 ga. conductors carry power, shielded 18 ga. conductors carry data. Input end is stripped for connection to the junction box, output end includes a female plug for fixture connection. Also included with each Parata feed cable is a end of run termination plug.(Contact factory for availability of custom feed cable lengths)

Jumper cable provides additional spacing between linear fixtures in the same run. 14 ga. conductors carry power, shielded 18 ga. conductors carry data. Input end includes a male connector, output end includes a female connector.

10'(3.48m)

50'(15.24m)

12"(305mm)

36"(914mm)

60"(1524mm)

DPI4W

4 1/16"(103mm)

Dimensions & Mounting

700ADJ2 - Linear Surface With Adjustable Mount Brackets

48" (1219mm)36 3/16" (919mm)24 3/8" (619mm)12 9/16" (319mm)

39 1/2" (1003mm)27 11/16" (703mm)15 7/8" (403mm)10 7/16" (265mm)

3 5/16"(84mm)

4 1/4"(108mm)

48" (1219mm)36 3/16" (919mm)24 3/8" (619mm)12 9/16" (319mm)

48" (1219mm)36 3/16" (919mm)24 3/8" (619mm)12 9/16" (319mm)

ADJUSTABLE

FLEXIBLE MOUNT

3 1/32"(77mm)

2 3/4"(70mm)

2 3/4"(70mm)

3 3/4"(95mm)

3"(95mm)

4 1/8"(105mm)

3 1/32"(77mm)

4 5/16"(110mm)

ADJUSTABLE IN10 DEG INCREMENTS

700ADJ1 - Linear Surface With Adjustable Hinge Mounts

700FMC - Linear Surface With Fixed Mounts

4 1/4"(108mm)

Brackets slide toadjust to variousmounting widths


5




®

01 blc720 spec - acuitybrandslighting.com · lcb 22ft linear plan winona offers the ability to...

Documents