© elinistech all rights reserved. lumenglow™ artificial intelligence bluetooth smart internet of...

© Elinistech all rights reserved.

LumenGlow™ Artificial Intelligence Bluetooth Smart Internet Of Things (“IoT”) lighting devices

© Elinistech All rights reserved. 2

Technologies solutions

LumenGlow™ Solutions:1.Miniature Bluetooth Smart PCB installed inside a lamp at the factory and empower it with the below function: 2.Variable energy consuming 30% to 60% saving. 3.Dimming command from Smart phone. Or Meshed Bluetooth Smart wall switch (no wires)4.Smart functions, based on external light and setting from Smart phone or Switch5.Full wireless RF mesh + beacon networking between lamps and all Bluetooth Smart products. 6.All lamps are in Observer mode. No RF pollution7. Bluetooth Smart Long range transmission ~200 meter. 8.Unlimited un blocking groups. A Lamp can be in several groups at the same time. 9.Environmental Sensors installed in lamp with restive or auto reporting. As smoke, fire, temperature, seismic, CO and Gus sensors. 10.Detect peoples smart phone in proximity to lamp.

The problem with existing led lamp: 1.Constant energy consuming 2.No possibility for dimming 3.No smart functions4.No mesh or wireless grouping 5.Not possible to be controlled by SmartPhones6.No control by Bluetooth Smart Wall Switch7.No Artificial Intelligence inside a lamp8.No beaconing function9.Need wiring in walls from switch to lamp10.lights remain on when someone exit room or home/ office/ public installation etc’.11.Shorter life due to overheated 12.No possibility to retrieve information from the lamp

LumenGlow™ Led lamp



Input voltage

Switch power up to 550Wto led panel

Option to addSensors, as:light, smoke, fire, humidity

Gas..

Local antenna

200 meter long range transmission

Mains input 90V to 275V



Led lamp parts with LumenGlow™ PCB


LumenGlow™ PCB : 1.Planed to be installed inside any led lamp at factory or get license for the design2.Support RGB lamps or white monochrome lamps.3.Supports switch power 9A 60V to led panel 4.Use for home led lamp and public led lamp 3W up to 540W. 5.Temperature monitoring 6.Soft start and use of the Artificial Intelligence monitor of current extended the led life 3 times to 100,000 hours working. More than 20 years with 12 house working per day. 7.Unique ID for every lamp to enable monitor and command all lamps in the network8.Every LumenGlow™ is also a Bluetooth Smart switch



LumenGlow™ Bluetooth Smart switch

LumenGlow™ wall switch: 1.Planed to be stuck to any wall without any cavity2.Ready to license the design to factories3.Part of LumenGlow™ mesh wireless network4. Artificial Intelligence local temperature monitor and auto send activated command to LumenGlow™ wall power switch, as needed with air conditions or heaters5.Artificial Intelligence local light sensor to soft start and dimmed start to led lamps6.512 X 512 points proximity sensor to detect multi touched and multi finger gesture to activate any LumenGlow™ products. 7.Unique ID to configure control to multi group.



LumenGlow™ Bluetooth Smart switch LumenGlow™ wall switch: 1.Every switch can enable monitor and command for every device in the mesh chain, also devices not in the local RF range. 2.A command can be send over mesh to far lamps.3.10 X Y leds to present bio feedback4.Audio enable feedback5.Supports local sensors input and auto sending command 6.Just 4 mm thickness7.A Switch PCB cab be located behind any front panel material expect a metal one. 8.Miniature 47 mm X 67 mm X 4 mm 9.Unique low energy consuming, battery can last several years. 10.Reports low battery power with smart phone message



LumenGlow™ Bluetooth Smart switch LumenGlow™ wall switch: 1.Configure over smart phone or tablet /iPad2.Dimming command by Smart phone and Bluetooth Smart Switch3.Sensor port supports analog and digital sensors4.Scrip and smart function, base on local sensors as light and temperature or external sensors attached to its sensor port5.Expend function to other systems by UART port. Supports industrial system over UART6. Supports, un blocking grouping. Unlimited groups. Lamp can be in several groups in the same time. 7.Auto dimming due to external light or time8.No need for external power9.Can detects residence’s smart phone at home/office and auto activate on/off light and any LumenGlow ™ product at home mesh. Bluetooth Smart Lamp, Bluetooth Smart door lock etc



LumenGlow™ Bluetooth Smart switch LumenGlow™ wall switch: 1.CR2032 Battery2.Finger gesture of X Y 10 Position leds3.External sensors connection port4.UART to Connector to external system5.Gestural aria6.25 3D long range proximity sensors (512 X 512 multi point recognition)7.Every proximity sensor detect all 3 axial X Y Z of the human finger8.This PCB is behind front panel and detects human finger approaching and hovering on the front panel 9.Unique Artificial Intelligence patented algorithm aggregates all 3 axial proximity information and use it to select one command to be transmitted to the home LumenGlow™ mesh network



LumenGlow™ Bluetooth Smart switch LumenGlow™ Wall Switch: 1.local antenna2.Gold coted battery cavity3.9 axial sensors with mechanical taping detector4.Bluetooth Smart Internet Of Things (“IoT”) dual processor IC +MESH + Beaconning 5.Temperature sensor6.4 digital sensors input or output actuators7.Wake up by external event8.I2C expansion slot to external sensors sense9.2 Analog input / output sensors10.3V output11.UART in/out12.Buzzer13.Wireless firmware update14.Light sensor15.3D gestural Artificial Intelligence DSP

1

2

3 4

6

7

8

10

12

15

9

11


LumenGlow™ family


LumenGlow™ mesh grouping



Technologies

LumenGlow™ All home and office devices


1. Easy to setup. Just switch on the device. Discover and control is then handled by the app on your smart device.

2. Additional authentication mode for enhanced security3. Supports full home automation models enabling Heating,

ventilation and Air Conditioning (HVAC), as well as security and sensing

4. LumenGlow™ technology enables wide participation from many manufacturers.

5. Phone events, as wake up call, reminders, incoming call can become events for LumenGlow™ devices. Blinking lamps, dimmed up in the morning, color change at night time etc’

6. LumenGlow™ Infrastructure is game-changing Internet of Things (“IoT”) Bluetooth® Smart solution enables a whole home control by the smartphone for the first time

7. LumenGlow™ algorithms allows Bluetooth® Smart to mature for Internet of Things applications

8. We believe this Bluetooth Smart solution will be a real game changer for developers because it means they don’t have to turn to proprietary solutions or add anything else to create products that give consumers what they want – complete home automation they can control from anywhere that ‘just works’.”

LumenGlow™ Intellectual property

1. Support 4,294,967,295 (0xFFFFFFFF) devices in one LumenGlow™ mesh

2. Each LumenGlow™ device is a Bluetooth Smart Internet Of Things (“IoT”) master and slave.

3. Any LumenGlow™ device can receive a command send status or reply messages

4. Any LumenGlow™ device in lamp or power server can transmit up to 200 meters

5. All Messages are encrypted 6. Any LumenGlow™ device can be part of unlimited other

groups. Groups can be overlapped7. Any LumenGlow™ device can be controlled by several

smart phone at the same time.8. Any LumenGlow™ device can work directly with any

Android , iPhone, iPad, Tablet, TVs and set-top boxes to interact directly. No need for any gateway.

9. Unlike other home automation connectivity solutions, such as Zigbee or Z-Wave, LumenGlow™ ensures direct control from mobile devices anywhere at home, because it doesn’t have a limited range or require a hub, “LumenGlow™ can be a base for driving Internet of Things innovation.


LumenGlow™ Intellectual property

1. The LumenGlow™ Mesh protocol uses Bluetooth Smart to send messages to other Bluetooth Smart devices in the network which in turn send them onward. Messages can be addressed to individual devices or groups of devices. It is also possible for devices to belong to more than one group. Control is enabled via standard Bluetooth Smart enabled appliances such as light switches, or via the majority of smartphones or tablets available today.

2. As well as allowing control from a smartphone, LumenGlow™ will give manufacture and developers the opportunity to build intelligence into the network so devices can communicate directly with one another. This will truly enable the future of the Internet of Things, meaning a consumer can automate their home so their lights come on when they enter a room, for example LumenGlow™ is already supporting a number of customer’s products to launch products based on LumenGlow™ and we’re looking forward to seeing how this solution kick starts the smart home market.

1. To ensure developers and manufacturers can get products to market quickly, Elinistech will be releasing a development kit to customers. Covers led lamp, guessers wall switch, power server. The kit will offer Android and iOS application source code as well as access to LumenGlow™ libraries.

2. LumenGlow™ Intellectual property can support target application include keyboards, mice, remote controls, watches, sports equipment, health sensors and home automation

3. LumenGlow™ led lamp PCB was design to be used in public lighting to convert cities into smart cities by using the streets new led lights.


LumenGlow™ Intellectual property future products

1. LumenGlow™ led lamp PCB was design to be use in public lighting to convert cities to smart cities by using the streets lights as sensors.

1. Smartphone Detection- Detects iPhone and Android devices and in general any device which works with Bluetooth Smart interfaces.

2. Smart cities lights. The light will auto dimmed and preserve energy based on the external natural light.

3. Traffic Congestion. Monitoring of vehicles and pedestrian levels to optimize driving and walking routes.

4. Smart Lighting. Intelligent and weather adaptive lighting in street lights.

5. Smart Roads, Intelligent Highways with warning messages and diversions according to climate conditions and unexpected events like accidents or traffic jams.

6. Smart inter cities roads. Lights will light only when there are cars on the road.

7. Smart gardens and parks lighting. Light will illuminate only when there are visitors at night.

8. Fire Detection Monitoring of combustion gases and preemptive fire conditions to define alert zones.

9. Air Pollution. Control of CO & CO2 emissions of factories, pollution emitted by cars and toxic gases generated in farms.

10. Earthquake Early Detection. Distributed control in specific places of tremors.


Technologies

LumenGlow™ Forward Looking StatementsForward Looking Statements :1.This press release contains certain statements (including statements concerning plans and objectives of management for future operations or performance, or assumptions related thereto) that are not historical facts and constitute ‘forward looking statements’ within the meaning of the United States Private Securities Litigation Reform Act of 1995 in relation to Elinistech’s Bluetooth® Smart platforms, and their performance characteristics in consumer electronic products, and other future events and their potential effects on Elinistech. These forward-looking statements can be identified by words such as ‘will,’ ‘can deliver,’ offers', 'allows', 'to enhance,’ ‘enables,’ 'designed to' and other similar expressions regarding the performance characteristics of Elinistech’s Bluetooth® Smart devices and designs, and their performance characteristics in consumer electronics products, and their potential effects on Elinistech. Any future release of Elinistech Bluetooth® Smart platforms or consumer electronics products containing such technology, related products or modifications to such products’ capability, functionality or features are subject to ongoing evaluation by Elinistech and its customers, and may or may not be implemented and should not be considered firm commitments by Elinistech or its customers and should not be relied upon in making purchasing decisions. Such forward-looking statements represent the current expectations and beliefs of management of Elinistech, and are based upon numerous assumptions regarding Elinistech’s business strategies and the environment in which Elinistech will operate and therefore involve a number of known and unknown risks, contingencies, uncertainties and other factors, many of which are beyond the control of Elinistech, including, but not limited to, those detailed from time to time in Elinistech’s periodic reports (whether under the caption Risk Factors or Forward Looking Statements or elsewhere), which are available at the SEC’s web site http://www.sec.gov. Each forward looking statement speaks only as of the date hereof. Elinistech does not undertake to release publicly any updates or revisions to any forward looking statements contained herein, otherwise than required by law.

2.Bluetooth® and the Bluetooth logos are trademarks owned by Bluetooth SIG, Inc. and licensed to Elinistech.

3.Other products, services and names used in this document may have been trademarked by their respective owners.

© elinistech all rights reserved. lumenglow™ artificial intelligence bluetooth smart internet of...

Documents